+++ /dev/null
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="7"
-
-inherit db-use toolchain-funcs multilib pam systemd
-
-IUSE="arc dane dcc +dkim dlfunc dmarc +dnsdb doc dovecot-sasl dsn elibc_glibc exiscan-acl gnutls idn ipv6 ldap libressl lmtp maildir mbx mysql nis pam perl pkcs11 postgres +prdr proxy radius redis sasl selinux spf sqlite srs ssl syslog tcpd +tpda X"
-REQUIRED_USE="
- arc? ( dkim spf )
- dane? ( ssl !gnutls )
- dmarc? ( dkim spf )
- gnutls? ( ssl )
- pkcs11? ( ssl )
- spf? ( exiscan-acl )
- srs? ( exiscan-acl )
- !ssl? ( !dkim )
-"
-# NOTE on USE="gnutls dane", gnutls[dane] is masked in base, unmasked
-# for x86 and amd64 only, due to this, repoman won't allow depending on
-# gnutls[dane] for all else. Because we cannot express USE=dane when
-# USE=gnutls is in effect only in package.use.mask, the only option we
-# have left is to a) ignore the dependency (but that results in bug
-# #661164) or b) mask the usage of USE=dane with USE=gnutls. Both are
-# incorrect, but b) is the only "correct" view from repoman.
-
-COMM_URI="https://downloads.exim.org/exim4$([[ ${PV} == *_rc* ]] && echo /test)"
-
-DESCRIPTION="A highly configurable, drop-in replacement for sendmail"
-SRC_URI="${COMM_URI}/${P//rc/RC}.tar.xz
- mirror://gentoo/system_filter.exim.gz
- doc? ( ${COMM_URI}/${PN}-pdf-${PV//rc/RC}.tar.xz )"
-HOMEPAGE="https://www.exim.org/"
-
-SLOT="0"
-LICENSE="GPL-2"
-KEYWORDS="~alpha amd64 arm hppa ia64 ppc ppc64 sparc x86 ~x86-solaris"
-
-COMMON_DEPEND=">=sys-apps/sed-4.0.5
- ( >=sys-libs/db-3.2:= <sys-libs/db-6:= )
- dev-libs/libpcre
- idn? ( net-dns/libidn:= net-dns/libidn2:= )
- perl? ( dev-lang/perl:= )
- pam? ( sys-libs/pam )
- tcpd? ( sys-apps/tcp-wrappers )
- ssl? (
- !libressl? ( dev-libs/openssl:0= )
- libressl? ( dev-libs/libressl:= )
- )
- gnutls? (
- net-libs/gnutls:0=[pkcs11?]
- dev-libs/libtasn1
- )
- ldap? ( >=net-nds/openldap-2.0.7 )
- nis? (
- elibc_glibc? (
- net-libs/libtirpc
- >=net-libs/libnsl-1:=
- )
- )
- mysql? ( dev-db/mysql-connector-c:= )
- postgres? ( dev-db/postgresql:= )
- sasl? ( >=dev-libs/cyrus-sasl-2.1.26-r2 )
- redis? ( dev-libs/hiredis )
- spf? ( >=mail-filter/libspf2-1.2.5-r1 )
- dmarc? ( mail-filter/opendmarc )
- srs? ( mail-filter/libsrs_alt )
- X? (
- x11-libs/libX11
- x11-libs/libXmu
- x11-libs/libXt
- x11-libs/libXaw
- )
- sqlite? ( dev-db/sqlite )
- radius? ( net-dialup/freeradius-client )
- virtual/libiconv
- elibc_glibc? ( net-libs/libnsl )
- "
- # added X check for #57206
-BDEPEND="virtual/pkgconfig"
-DEPEND="${COMMON_DEPEND}"
-RDEPEND="${COMMON_DEPEND}
- !mail-mta/courier
- !mail-mta/esmtp
- !mail-mta/mini-qmail
- !<mail-mta/msmtp-1.4.19-r1
- !>=mail-mta/msmtp-1.4.19-r1[mta]
- !mail-mta/netqmail
- !mail-mta/nullmailer
- !mail-mta/postfix
- !mail-mta/qmail-ldap
- !mail-mta/sendmail
- !mail-mta/opensmtpd
- !<mail-mta/ssmtp-2.64-r2
- !>=mail-mta/ssmtp-2.64-r2[mta]
- !net-mail/mailwrapper
- >=net-mail/mailbase-0.00-r5
- virtual/logger
- dcc? ( mail-filter/dcc )
- selinux? ( sec-policy/selinux-exim )
- "
-
-PATCHES=(
- "${FILESDIR}"/exim-4.69-r1.27021.patch
- "${FILESDIR}"/exim-4.92-localscan_dlopen.patch
-)
-
-S=${WORKDIR}/${P//rc/RC}
-
-src_prepare() {
- # Legacy patches which need a respin for -p1
- eapply -p0 "${FILESDIR}"/exim-4.14-tail.patch
- eapply -p0 "${FILESDIR}"/exim-4.74-radius-db-ENV-clash.patch # 287426
- eapply -p0 "${FILESDIR}"/exim-4.82-makefile-freebsd.patch # 235785
- eapply -p0 "${FILESDIR}"/exim-4.89-as-needed-ldflags.patch # 352265, 391279
- eapply -p0 "${FILESDIR}"/exim-4.76-crosscompile.patch # 266591
- eapply -p2 "${FILESDIR}"/exim-4.92-fix-eval-expansion-32bit.patch #687554
-
- if use maildir ; then
- eapply "${FILESDIR}"/exim-4.20-maildir.patch
- else
- eapply -p0 "${FILESDIR}"/exim-4.80-spool-mail-group.patch # 438606
- fi
-
- default
-
- # user Exim believes it should be
- MAILUSER=mail
- MAILGROUP=mail
- if use prefix && [[ ${EUID} != 0 ]] ; then
- MAILUSER=$(id -un)
- MAILGROUP=$(id -gn)
- fi
-}
-
-src_configure() {
- # general config and paths
-
- local aliases="${EPREFIX}/etc/mail/aliases"
- sed -i \
- -e "/SYSTEM_ALIASES_FILE/s'SYSTEM_ALIASES_FILE'${aliases}'" \
- src/configure.default || die
-
- sed -i -e 's/^buildname=.*/buildname=exim-gentoo/' Makefile || die
-
- if use elibc_musl; then
- sed -i -e 's/^LIBS = -lnsl/LIBS =/g' OS/Makefile-Linux || die
- fi
-
- local conffile="${EPREFIX}/etc/exim/exim.conf"
- sed -e "48i\CFLAGS=${CFLAGS}" \
- -e "s:BIN_DIRECTORY=/usr/exim/bin:BIN_DIRECTORY=${EPREFIX}/usr/sbin:" \
- -e "s:EXIM_USER=:EXIM_USER=${MAILUSER}:" \
- -e "s:CONFIGURE_FILE=.*$:CONFIGURE_FILE=${conffile}:" \
- -e "s:ZCAT_COMMAND=.*$:ZCAT_COMMAND=${EPREFIX}/bin/zcat:" \
- -e "s:COMPRESS_COMMAND=.*$:COMPRESS_COMMAND=${EPREFIX}/bin/gzip:" \
- src/EDITME > Local/Makefile || die
-
- # work on Local/Makefile from now on
- cd Local
-
- cat >> Makefile <<- EOC
- INFO_DIRECTORY=${EPREFIX}/usr/share/info
- PID_FILE_PATH=${EPREFIX}/run/exim.pid
- SPOOL_DIRECTORY=${EPREFIX}/var/spool/exim
- HAVE_ICONV=yes
- EOC
-
- # if we use libiconv, now is the time to tell so
- use !elibc_glibc && use !elibc_musl && \
- echo "EXTRALIBS_EXIM=-liconv" >> Makefile
-
- # support for IPv6
- if use ipv6; then
- cat >> Makefile <<- EOC
- HAVE_IPV6=YES
- EOC
- fi
-
- # support i18n/IDNA
- if use idn; then
- cat >> Makefile <<- EOC
- SUPPORT_I18N=yes
- SUPPORT_I18N_2008=yes
- EXTRALIBS_EXIM += -lidn -lidn2
- EOC
- fi
-
- #
- # mail storage formats
- #
-
- # mailstore is Exim's traditional storage format
- cat >> Makefile <<- EOC
- SUPPORT_MAILSTORE=yes
- EOC
-
- # mbox
- if use mbx; then
- cat >> Makefile <<- EOC
- SUPPORT_MBX=yes
- EOC
- fi
-
- # maildir
- if use maildir; then
- cat >> Makefile <<- EOC
- SUPPORT_MAILDIR=yes
- EOC
- fi
-
- #
- # lookup methods
-
- # use the "native" interfaces to the DBM and CDB libraries, support
- # passwd and directory lookups by default
- local DB_VERS="5.3 5.1 4.8 4.7 4.6 4.5 4.4 4.3 4.2 3.2"
- cat >> Makefile <<- EOC
- USE_DB=yes
- CFLAGS+=-I$(db_includedir ${DB_VERS})
- DBMLIB=-l$(db_libname ${DB_VERS})
- LOOKUP_CDB=yes
- LOOKUP_PASSWD=yes
- LOOKUP_DSEARCH=yes
- EOC
-
- if ! use dnsdb; then
- # DNSDB lookup is enabled by default
- sed -i -e 's:^LOOKUP_DNSDB=yes:# LOOKUP_DNSDB=yes:' Makefile || die
- fi
-
- if use ldap; then
- cat >> Makefile <<- EOC
- LOOKUP_LDAP=yes
- LDAP_LIB_TYPE=OPENLDAP2
- LOOKUP_INCLUDE += -I"${EPREFIX}"/usr/include/ldap
- LOOKUP_LIBS += -lldap -llber
- EOC
- fi
-
- if use mysql; then
- cat >> Makefile <<- EOC
- LOOKUP_MYSQL=yes
- LOOKUP_INCLUDE += $(mysql_config --include)
- LOOKUP_LIBS += $(mysql_config --libs)
- EOC
- fi
-
- if use nis; then
- cat >> Makefile <<- EOC
- LOOKUP_NIS=yes
- LOOKUP_NISPLUS=yes
- EOC
- if use elibc_glibc ; then
- cat >> Makefile <<- EOC
- CFLAGS += -I"${EPREFIX}"/usr/include/tirpc
- EOC
- fi
- fi
-
- if use postgres; then
- cat >> Makefile <<- EOC
- LOOKUP_PGSQL=yes
- LOOKUP_INCLUDE += -I$(pg_config --includedir)
- LOOKUP_LIBS += -L$(pg_config --libdir) -lpq
- EOC
- fi
-
- if use sqlite; then
- cat >> Makefile <<- EOC
- LOOKUP_SQLITE=yes
- LOOKUP_SQLITE_PC=sqlite3
- EOC
- fi
-
- if use redis; then
- cat >> Makefile <<- EOC
- LOOKUP_REDIS=yes
- LOOKUP_LIBS += -lhiredis
- EOC
- fi
-
- # Exim monitor, enabled by default, controlled via X USE-flag,
- # disable if not requested, bug #46778
- if use X; then
- cp ../exim_monitor/EDITME eximon.conf || die
- else
- sed -i -e '/^EXIM_MONITOR=/s/^/# /' Makefile || die
- fi
-
- #
- # features
- #
-
- # content scanning support
- if use exiscan-acl; then
- cat >> Makefile <<- EOC
- WITH_CONTENT_SCAN=yes
- EOC
- fi
-
- # DomainKeys Identified Mail, RFC4871
- if ! use dkim; then
- # DKIM is enabled by default
- cat >> Makefile <<- EOC
- DISABLE_DKIM=yes
- EOC
- fi
-
- # Per-Recipient-Data-Response
- if ! use prdr; then
- # PRDR is enabled by default
- cat >> Makefile <<- EOC
- DISABLE_PRDR=yes
- EOC
- fi
-
- # Transport post-delivery actions
- if use !tpda && use !dane; then
- # EVENT is enabled by default
- cat >> Makefile <<- EOC
- DISABLE_EVENT=yes
- EOC
- fi
-
- # log to syslog
- if use syslog; then
- local eximlog="${EPREFIX}/var/log/exim/exim_%s.log"
- sed -i \
- -e "s:LOG_FILE_PATH=${eximlog}:LOG_FILE_PATH=syslog:" \
- Makefile || die
- cat >> Makefile <<- EOC
- LOG_FILE_PATH=syslog
- EOC
- else
- cat >> Makefile <<- EOC
- LOG_FILE_PATH=${EPREFIX}/var/log/exim/exim_%s.log
- EOC
- fi
-
- # starttls support (ssl)
- if use ssl; then
- echo "SUPPORT_TLS=yes" >> Makefile
- if use gnutls; then
- echo "USE_GNUTLS=yes" >> Makefile
- echo "USE_GNUTLS_PC=gnutls" >> Makefile
- use pkcs11 || echo "AVOID_GNUTLS_PKCS11=yes" >> Makefile
- else
- echo "USE_OPENSSL_PC=openssl" >> Makefile
- fi
- fi
-
- # TCP wrappers
- if use tcpd; then
- cat >> Makefile <<- EOC
- USE_TCP_WRAPPERS=yes
- EXTRALIBS_EXIM += -lwrap
- EOC
- fi
-
- # Light Mail Transport Protocol
- if use lmtp; then
- cat >> Makefile <<- EOC
- TRANSPORT_LMTP=yes
- EOC
- fi
-
- # embedded Perl
- if use perl; then
- cat >> Makefile <<- EOC
- EXIM_PERL=perl.o
- EOC
- fi
-
- # dlfunc
- if use dlfunc; then
- cat >> Makefile <<- EOC
- EXPAND_DLFUNC=yes
- HAVE_LOCAL_SCAN=yes
- DLOPEN_LOCAL_SCAN=yes
- EOC
- fi
-
- # Proxy Protocol
- if use proxy; then
- cat >> Makefile <<- EOC
- SUPPORT_PROXY=yes
- EOC
- fi
-
- # DANE
- if use dane; then
- cat >> Makefile <<- EOC
- SUPPORT_DANE=yes
- EOC
- fi
-
- # Sender Policy Framework
- if use spf; then
- cat >> Makefile <<- EOC
- SUPPORT_SPF=yes
- EXTRALIBS_EXIM += -lspf2
- EOC
- fi
-
- #
- # experimental features
- #
-
- # Authenticated Receive Chain
- if use arc; then
- echo "EXPERIMENTAL_ARC=yes">> Makefile
- fi
-
- # Distributed Checksum Clearinghouse
- if use dcc; then
- echo "EXPERIMENTAL_DCC=yes">> Makefile
- fi
-
- # Sender Rewriting Scheme
- if use srs; then
- cat >> Makefile <<- EOC
- EXPERIMENTAL_SRS=yes
- EXTRALIBS_EXIM += -lsrs_alt
- EOC
- fi
-
- # DMARC
- if use dmarc; then
- cat >> Makefile <<- EOC
- EXPERIMENTAL_DMARC=yes
- EXTRALIBS_EXIM += -lopendmarc
- EOC
- fi
-
- # Delivery Sender Notifications extra information in fail message
- if use dsn; then
- cat >> Makefile <<- EOC
- EXPERIMENTAL_DSN_INFO=yes
- EOC
- fi
-
- #
- # authentication (SMTP AUTH)
- #
-
- # standard bits
- cat >> Makefile <<- EOC
- AUTH_SPA=yes
- AUTH_CRAM_MD5=yes
- AUTH_PLAINTEXT=yes
- EOC
-
- # Cyrus SASL
- if use sasl; then
- cat >> Makefile <<- EOC
- CYRUS_SASLAUTHD_SOCKET=${EPREFIX}/run/saslauthd/mux
- AUTH_CYRUS_SASL=yes
- AUTH_LIBS += -lsasl2
- EOC
- fi
-
- # Dovecot
- if use dovecot-sasl; then
- cat >> Makefile <<- EOC
- AUTH_DOVECOT=yes
- EOC
- fi
-
- # Pluggable Authentication Modules
- if use pam; then
- cat >> Makefile <<- EOC
- SUPPORT_PAM=yes
- AUTH_LIBS += -lpam
- EOC
- fi
-
- # Radius
- if use radius; then
- cat >> Makefile <<- EOC
- RADIUS_CONFIG_FILE=${EPREFIX}/etc/radiusclient/radiusclient.conf
- RADIUS_LIB_TYPE=RADIUSCLIENTNEW
- AUTH_LIBS += -lfreeradius-client
- EOC
- fi
-}
-
-src_compile() {
- emake CC="$(tc-getCC)" HOSTCC="$(tc-getBUILD_CC)" \
- AR="$(tc-getAR) cq" RANLIB="$(tc-getRANLIB)" FULLECHO=''
-}
-
-src_install() {
- cd "${S}"/build-exim-gentoo || die
- dosbin exim
- if use X; then
- dosbin eximon.bin
- dosbin eximon
- fi
- fperms 4755 /usr/sbin/exim
-
- dosym exim /usr/sbin/sendmail
- dosym exim /usr/sbin/rsmtp
- dosym exim /usr/sbin/rmail
- dosym ../sbin/exim /usr/bin/mailq
- dosym ../sbin/exim /usr/bin/newaliases
- dosym ../sbin/sendmail /usr/lib/sendmail
-
- for i in exicyclog exim_dbmbuild exim_dumpdb exim_fixdb exim_lock \
- exim_tidydb exinext exiwhat exigrep eximstats exiqsumm exiqgrep \
- convert4r3 convert4r4 exipick
- do
- dosbin $i
- done
-
- dodoc -r "${S}"/doc/.
- doman "${S}"/doc/exim.8
- use dsn && dodoc "${S}"/README.DSN
- use doc && dodoc "${WORKDIR}"/${PN}-pdf-${PV//rc/RC}/doc/*.pdf
-
- # conf files
- insinto /etc/exim
- newins "${S}"/src/configure.default exim.conf.dist
- if use exiscan-acl; then
- newins "${S}"/src/configure.default exim.conf.exiscan-acl
- fi
- doins "${WORKDIR}"/system_filter.exim
- doins "${FILESDIR}"/auth_conf.sub
-
- pamd_mimic system-auth exim auth account
-
- # headers, #436406
- if use dlfunc ; then
- # fixup includes so they actually can be found when including
- sed -i \
- -e '/#include "\(config\|store\|mytypes\).h"/s:"\(.\+\)":<exim/\1>:' \
- local_scan.h || die
- insinto /usr/include/exim
- doins {config,local_scan}.h ../src/{mytypes,store}.h
- fi
-
- insinto /etc/logrotate.d
- newins "${FILESDIR}/exim.logrotate" exim
-
- newinitd "${FILESDIR}"/exim.rc10 exim
- newconfd "${FILESDIR}"/exim.confd exim
-
- systemd_dounit \
- "${FILESDIR}"/{exim.service,exim.socket,exim-submission.socket}
- systemd_newunit \
- "${FILESDIR}"/exim_at.service 'exim@.service'
- systemd_newunit \
- "${FILESDIR}"/exim-submission_at.service 'exim-submission@.service'
-
- diropts -m 0750 -o ${MAILUSER} -g ${MAILGROUP}
- keepdir /var/log/${PN}
-}
-
-pkg_postinst() {
- if [[ ! -f ${EROOT}/etc/exim/exim.conf ]] ; then
- einfo "${EROOT}/etc/exim/system_filter.exim is a sample system_filter."
- einfo "${EROOT}/etc/exim/auth_conf.sub contains the configuration sub"
- einfo "for using smtp auth."
- einfo "Please create ${EROOT}/etc/exim/exim.conf from"
- einfo " ${EROOT}/etc/exim/exim.conf.dist."
- fi
- if use dcc ; then
- einfo "DCC support is experimental, you can find some limited"
- einfo "documentation at the bottom of this prerelease message:"
- einfo "http://article.gmane.org/gmane.mail.exim.devel/3579"
- fi
- use srs && einfo "SRS support is experimental"
- if use dmarc ; then
- einfo "DMARC support is experimental. See global settings to"
- einfo "configure DMARC, for usage see the documentation at "
- einfo "experimental-spec.txt."
- fi
- use dsn && einfo "extra information in fail DSN message is experimental"
- elog "The obsolete acl condition 'demime' is removed, the replacements"
- elog "are the ACLs acl_smtp_mime and acl_not_smtp_mime"
-}
projects / gentoo.git / commitdiff