4 PATH="${PATH}:/sbin:/usr/sbin"
7 # Set the default for TMPDIR. May be modified by genkernel.conf or the
8 # --tempdir command line option.
9 TMPDIR='/var/tmp/genkernel'
11 TODEBUGCACHE=1 # Until an error occurs or LOGFILE is fully qualified.
21 echo "$1" | cut -f2- -d=
26 # We don't know where our config is, so we check for it, and default to using
27 # /etc/genkernel.conf if nobody has specified one.
29 # NOTE: We are look for --config=... in a way that doesn't modify $@ since we access that again, later
30 for (( i=1; i<=$# ; i=i+1 )); do
32 [[ "${arg}" = --config=* ]] && CMD_GK_CONFIG=`parse_opt "${arg}"`
35 # Pull in our configuration
36 _GENKERNEL_CONF=${CMD_GK_CONFIG:-/etc/genkernel.conf}
37 source "${_GENKERNEL_CONF}" || small_die "Could not read ${_GENKERNEL_CONF}"
39 # Start sourcing other scripts
40 source ${GK_SHARE}/defaults/software.sh || small_die "Could not read ${GK_SHARE}/defaults/software.sh"
41 source ${GK_SHARE}/gen_funcs.sh || small_die "Could not read ${GK_SHARE}/gen_funcs.sh"
42 source ${GK_SHARE}/gen_cmdline.sh || gen_die "Could not read ${GK_SHARE}/gen_cmdline.sh"
43 source ${GK_SHARE}/gen_arch.sh || gen_die "Could not read ${GK_SHARE}/gen_arch.sh"
44 source ${GK_SHARE}/gen_determineargs.sh || gen_die "Could not read ${GK_SHARE}/gen_determineargs.sh"
45 source ${GK_SHARE}/gen_compile.sh || gen_die "Could not read ${GK_SHARE}/gen_compile.sh"
46 source ${GK_SHARE}/gen_configkernel.sh || gen_die "Could not read ${GK_SHARE}/gen_configkernel.sh"
47 source ${GK_SHARE}/gen_initramfs.sh || gen_die "Could not read ${GK_SHARE}/gen_initramfs.sh"
48 source ${GK_SHARE}/gen_moddeps.sh || gen_die "Could not read ${GK_SHARE}/gen_moddeps.sh"
49 source ${GK_SHARE}/gen_package.sh || gen_die "Could not read ${GK_SHARE}/gen_package.sh"
50 source ${GK_SHARE}/gen_bootloader.sh || gen_die "Could not read ${GK_SHARE}/gen_bootloader.sh"
52 TEMP=${TMPDIR}/$RANDOM.$RANDOM.$RANDOM.$$
55 # Call exit code of 1 for failure
61 if [ -n "$TEMP" -a -d "$TEMP" ]; then
65 if isTrue ${POSTCLEAR}
68 print_info 1 'RUNNING FINAL CACHE/TMP CLEANUP'
69 print_info 1 "CACHE_DIR: ${CACHE_DIR}"
73 print_info 1 "TMPDIR: ${TMPDIR}"
78 trap trap_cleanup SIGHUP SIGQUIT SIGINT SIGTERM SIGKILL
83 # Parse all command line options...
84 Options=$* # Save for later
91 # Check if no action is specified...
92 if [ "${BUILD_KERNEL}" = '0' -a "${BUILD_RAMDISK}" = '0' ]
99 NORMAL=${GOOD} print_info 1 "Gentoo Linux Genkernel; Version ${GK_V}${NORMAL}"
100 print_info 1 "Running with options: ${Options}"
106 # Read arch-specific config
107 print_info 1 "Using genkernel.conf from ${_GENKERNEL_CONF}"
108 print_info 1 "Sourcing arch-specific config.sh from ${ARCH_CONFIG} .."
109 source ${ARCH_CONFIG} || gen_die "Could not read ${ARCH_CONFIG}"
110 _MODULES_LOAD=${GK_SHARE}/arch/${ARCH}/modules_load
111 print_info 1 "Sourcing arch-specific modules_load from ${_MODULES_LOAD} .."
112 source "${_MODULES_LOAD}" || gen_die "Could not read ${_MODULES_LOAD}"
115 # Merge modules_load from config
116 for group_modules in ${!AMODULES_*}; do
117 group="$(echo $group_modules | cut -d_ -f2)"
118 eval cmodules="\$$group_modules"
119 eval MODULES_${group}=\"\${MODULES_${group}} ${cmodules}\"
120 print_info 1 "<config> Merged AMODULES_${group}:'${cmodules}' into MODULES_${group}"
124 # Based on genkernel.conf, arch-specific configs, and commandline options,
125 # get the real arguments for usage...
128 determine_config_file
132 [ ! -f "${TEMP}" ] && mkdir -p "${TEMP}"
140 NORMAL=${BOLD} print_info 1 "Linux Kernel ${BOLD}${KV}${NORMAL} for ${BOLD}${ARCH}${NORMAL}..."
141 print_info 1 ".. with config file ${KERNEL_CONFIG}"
143 # Check BOOTDIR is mounted
144 if ! isTrue ${CMD_INSTALL}
146 isTrue ${MOUNTBOOT} && print_info 2 'Skipping automatic mount of boot'
148 [[ -d ${BOOTDIR} ]] || gen_die "${BOOTDIR} is not a directory"
150 if ! egrep -q "[[:space:]]${BOOTDIR}[[:space:]]" /proc/mounts
152 if egrep -q "^[^#].+[[:space:]]${BOOTDIR}[[:space:]]" /etc/fstab
154 if isTrue ${MOUNTBOOT}
156 if ! mount ${BOOTDIR}
158 print_warning 1 "${BOLD}WARNING${NORMAL}: Failed to mount ${BOOTDIR}!"
161 print_info 1 "mount: ${BOOTDIR} mounted successfully!"
164 print_warning 1 "${BOLD}WARNING${NORMAL}: No mounted ${BOOTDIR} partition detected!"
165 print_warning 1 " Run ``mount ${BOOTDIR}`` to mount it!"
171 if isTrue ${MOUNTBOOT}
173 if ! mount -o remount,rw ${BOOTDIR}
175 print_warning 1 "${BOLD}WARNING${NORMAL}: Failed to remount ${BOOTDIR} RW!"
178 print_info 1 "mount: ${BOOTDIR} remounted read/write successfully!"
185 ## Check whether another Genkernel is running
186 #GENPIDS="`ps -C genkernel --no-headers -o pid | wc -l`"
187 #if [ "${GENPIDS}" -gt '3' ]
189 # [ "${GENPIDS}" -gt '4' ] && EX='s'
190 # print_warning 1 "${BOLD}WARNING${NORMAL}: Another Genkernel instance is running under"
191 # print_warning 1 " process ID${EX} " 0
192 # GENPIDS=`ps -C genkernel --no-headers -o pid`
193 # echo -n "${GENPIDS}" | sed -e "s/$$//; s/ /, /g"
196 # print_warning 1 'Running multiple genkernels on the same source tree will cause data loss!'
197 # print_info 1 "Press ^C to halt; ^D to continue [ ${BOLD}if${NORMAL} you know what you're doing! ]"
200 # TEMP=${TMPDIR-/tmp}
201 # TEMP=${TEMP}/genkernel.$RANDOM.$RANDOM.$RANDOM.$$
202 # print_info 1 'thread: Running multiple genkernels may cause problems!'
203 # print_info 1 "thread: Temporary files reallocated to ${TEMP}..."
208 if [ "${KERNCACHE}" != "" ]
210 gen_kerncache_is_valid
213 if [ ${BUILD_KERNEL} = '1' -a "${KERNCACHE_IS_VALID}" = '0' ]
219 if [ "${ARCH_HAVENOPREPARE}" = '' ]
221 compile_generic prepare kernel
224 # KV may have changed due to the configuration
230 if [ "${BUILD_MODULES}" = '1' -a "${BUILD_STATIC}" = '0' ]
235 if [ "${SAVE_CONFIG}" = '1' ]
237 print_info 1 "Copying config for successful build to /etc/kernels/kernel-config-${ARCH}-${KV}"
238 [ ! -e '/etc/kernels' ] && mkdir -p /etc/kernels
239 cp "${KERNEL_DIR}/.config" "/etc/kernels/kernel-config-${ARCH}-${KV}"
243 if isTrue "${CMD_INSTALL}"
245 if [ "${KERNCACHE}" != "" -a "${KERNCACHE_IS_VALID}" != "0" ]
247 gen_kerncache_extract_kernel
251 if [ "${KERNCACHE}" != "" -a "${KERNCACHE_IS_VALID}" != "0" ]
253 [ "${BUILD_STATIC}" = '0' ] && gen_kerncache_extract_modules
254 gen_kerncache_extract_config
258 if [ "${CMD_CALLBACK}" != "" ]
261 print_info 1 "Preparing to run callback: \"${CMD_CALLBACK}\"" 0
266 trap "CALLBACK_ESCAPE=1" TERM KILL INT QUIT ABRT
267 while [[ "${CALLBACK_ESCAPE}" = '0' && ${CALLBACK_COUNT} -lt 5 ]]
269 sleep 1; echo -n '.';
270 let CALLBACK_COUNT=${CALLBACK_COUNT}+1
273 if [ "${CALLBACK_ESCAPE}" = '0' ]
277 eval ${CMD_CALLBACK} | tee -a ${LOGFILE}
278 CMD_STATUS="${PIPESTATUS[0]}"
280 print_info 1 "<<< Callback exit status: ${CMD_STATUS}"
281 [ "${CMD_STATUS}" != '0' ] && gen_die '--callback failed!'
284 print_info 1 ">>> Callback cancelled..."
286 trap - TERM KILL INT QUIT ABRT
290 if [ "${BUILD_RAMDISK}" = '1' ]
292 if [ "${BUSYBOX}" = '1' ]
298 if isTrue "${UNIONFS}"
306 print_info 1 'initrd: Not building since only the kernel was requested...'
309 if isTrue "${INTEGRATED_INITRAMFS}" #|| [ "${BUILD_KERNEL}" = '1' -a "${KERNCACHE_IS_VALID}" == "0" ]
311 # We build the kernel a second time to include the initramfs
315 [ "${KERNCACHE}" != "" ] && gen_kerncache
316 [ "${MINKERNPACKAGE}" != '' ] && gen_minkernpackage
317 [ "${MODULESPACKAGE}" != '' ] && gen_modulespackage
320 [ -n "${CTEMP}" ] && rm -rf "${TEMP}"
322 if [ "${BUILD_KERNEL}" = '1' ]
324 if isTrue "${CMD_INSTALL}"
329 print_info 1 "Kernel compiled successfully!"
331 print_info 1 'Required Kernel Parameters:'
332 if [ "${BUILD_RAMDISK}" = '0' ]
334 print_info 1 ' root=/dev/$ROOT'
335 print_info 1 ' [ And "vga=0x317 splash=verbose" if you use a framebuffer ]'
337 print_info 1 ' Where $ROOT is the device node for your root partition as the'
338 print_info 1 ' one specified in /etc/fstab'
340 print_info 1 ' real_root=/dev/$ROOT'
342 print_info 1 ' Where $ROOT is the device node for your root partition as the'
343 print_info 1 ' one specified in /etc/fstab'
345 print_info 1 "If you require Genkernel's hardware detection features; you MUST"
346 print_info 1 'tell your bootloader to use the provided INITRAMFS file. Otherwise;'
347 print_info 1 'substitute the root argument for the real_root argument if you are'
348 print_info 1 'not planning to use the initramfs...'
352 if [ "${BUILD_RAMDISK}" = '1' ]
355 print_warning 1 'WARNING... WARNING... WARNING...'
356 print_warning 1 'Additional kernel cmdline arguments that *may* be required to boot properly...'
357 [ "${SPLASH}" = '1' ] && print_warning 1 "add \"vga=791 splash=silent,theme:${SPLASH_THEME} console=tty1 quiet\" if you use a splash framebuffer ]"
358 [ "${LVM}" = '1' ] && print_warning 1 'add "dolvm" for lvm support'
359 [ "${DMRAID}" = '1' ] && print_warning 1 'add "dodmraid" for dmraid support'
360 [ "${MDADM}" = '1' ] && print_warning 1 'add "domdadm" for RAID support'
361 [ "${DMRAID}" = '1' ] && print_warning 1 ' or "dodmraid=<additional options>"'
362 [ "${ZFS}" = '1' ] && print_warning 1 'add "dozfs" for ZFS volume management support'
363 [ "${ZFS}" = '1' ] && print_warning 1 'add either "real_root=ZFS" (bootfs autodetection) or "real_root=ZFS=<dataset>" to boot from a ZFS dataset'
364 [ "${ISCSI}" = '1' ] && print_warning 1 'add at least "iscsi_initiatorname=<initiator name> iscsi_target=<target name> and iscsi_address=<target ip>" for iscsi support'
366 if [[ "$(file --brief --mime-type "${KERNEL_CONFIG}")" == application/x-gzip ]]; then
367 # Support --kernel-config=/proc/config.gz, mainly
373 if [ `${CONFGREP} 'CONFIG_EXT[0-9]_FS=' "${KERNEL_CONFIG}" | wc -l` -ge 2 ]; then
374 print_warning 1 'With support for several ext* filesystems available, it may be needed to'
375 print_warning 1 'add "rootfstype=ext3" or "rootfstype=ext4" to the list of boot parameters.'
381 [ "${BOOTRW}" != '' ] && mount -o remount,ro ${BOOTDIR}
384 print_info 1 'Do NOT report kernel bugs as genkernel bugs unless your bug'
385 print_info 1 'is about the default genkernel configuration...'
387 print_info 1 'Make sure you have the latest ~arch genkernel before reporting bugs.'