+++ /dev/null
-.SUFFIXES: .tex .dvi .ps
-
-STYLES=changebar.sty fixunder.sty functions.sty
-LIBTEX= library.tex krb5.tex ccache.tex rcache.tex keytab.tex libos.tex \
- kdb.tex encrypt.tex cksum.tex crc-32.tex library.ind
-
-DESTEX= libdes.tex
-
-all: library.ps libdes.ps
-
-
-libdes.ps: libdes.dvi
-libdes.tex: $(DESTEX) $(STYLES)
-
-library.ps: library.dvi
-
-# hard to capture two-pass semantics in Makefiles...
-# library.ind: library.dvi
-library.ind:
- index library.idx
-
-library.tex: $(LIBTEX) $(STYLES)
-
-.tex.dvi:
- latex $*
-
-
-.dvi.ps:
- dvi2ps -r $*.dvi >$*.ps
-
+++ /dev/null
-The credentials cache functions (some of which are macros which call to
-specific types of credentials caches) deal with storing credentials
-(tickets, session keys, and other identifying information) in a
-semi-permanent store for later use by different programs.
-
-\subsubsection{Per-type functions}
-The following entry points must be implemented for each type of
-credentials cache; however, applications are not expected to have a need
-to call either \funcname{krb5_cc_resolve_internal} or
-\funcname{krb5_cc_gennew_internal}.
-
-
-\begin{funcdecl}{krb5_cc_resolve_internal}{krb5_error_code}{\funcout}
-\funcarg{krb5_ccache *}{id}
-\funcin
-\funcarg{char *}{residual}
-\end{funcdecl}
-
-Creates a credentials cache named by \funcparam{residual} (which may be
-interpreted differently by each type of ccache). The cache is not
-opened, but the cache name is held in reserve.
-
-\begin{funcdecl}{krb5_cc_gennew_internal}{krb5_error_code}{\funcout}
-\funcarg{krb5_ccache *}{id}
-\end{funcdecl}
-
-Creates a new credentials cache whose name is guaranteed to be
-unique. The cache is not opened. \funcparam{*id} is
-filled in with a \datatype{krb5_ccache} which may be used in subsequent
-calls to ccache functions.
-
-\begin{funcdecl}{krb5_cc_initialize}{krb5_error_code}{\funcinout}
-\funcarg{krb5_ccache}{id}
-\funcin
-\funcarg{krb5_principal}{primary_principal}
-\end{funcdecl}
-
-Creates/refreshes a credentials cache identified by \funcparam{id} with
-primary principal set to \funcparam{primary_principal}.
-If the credentials cache already exists, its contents are destroyed.
-
-Errors: permission errors, system errors.
-
-Modifies: cache identified by \funcparam{id}.
-
-\begin{funcdecl}{krb5_cc_destroy}{krb5_error_code}{\funcin}
-\funcarg{krb5_ccache}{id}
-\end{funcdecl}
-
-Destroys the credentials cache identified by \funcparam{id}, invalidates
-\funcparam{id}, and releases any other resources acquired during use of
-the credentials cache. Requires that \funcparam{id} identifies a valid
-credentials cache. After return, \funcparam{id} must not be used unless
-it is first reinitialized.
-
-Errors: permission errors.
-
-\begin{funcdecl}{krb5_cc_close}{krb5_error_code}{\funcinout}
-\funcarg{krb5_ccache}{id}
-\end{funcdecl}
-
-Closes the credentials cache \funcparam{id}, invalidates \funcparam{id},
-and releases any other resources acquired during use of the credentials
-cache. Requires that \funcparam{id} identifies a valid credentials
-cache. After return, \funcparam{id} must not be used unless it is first
-reinitialized.
-
-
-\begin{funcdecl}{krb5_cc_store_cred}{krb5_error_code}{\funcin}
-\funcarg{krb5_ccache}{id}
-\funcarg{krb5_credentials *}{creds}
-\end{funcdecl}
-
-Stores \funcparam{creds} in the cache \funcparam{id}, tagged with
-\funcparam{creds{\ptsto}client}.
-Requires that \funcparam{id} identifies a valid credentials cache.
-
-Errors: permission errors, storage failure errors.
-
-\begin{funcdecl}{krb5_cc_retrieve_cred}{krb5_error_code}{\funcin}
-\funcarg{krb5_ccache}{id}
-\funcarg{krb5_flags}{whichfields}
-\funcarg{krb5_credentials *}{mcreds}
-\funcout
-\funcarg{krb5_credentials *}{creds}
-\end{funcdecl}
-
-Searches the cache \funcparam{id} for credentials matching
-\funcparam{mcreds}. The fields which are to be matched are specified by
-set bits in \funcparam{whichfields}, and always include the principal
-name \funcparam{mcreds{\ptsto}server}.
-Requires that \funcparam{id} identifies a valid credentials cache.
-
-If at least one match is found, one of the matching credentials is
-returned in \funcparam{*creds}. XXX free the return creds?
-
-Errors: error code if no matches found.
-
-\begin{funcdecl}{krb5_cc_get_principal}{krb5_error_code}{\funcin}
-\funcarg{krb5_ccache}{id}
-\funcarg{krb5_principal *}{principal}
-\end{funcdecl}
-
-Retrieves the primary principal of the credentials cache (as
-set by the \funcname{krb5_cc_initialize} request)
-The primary principal is filled into \funcparam{*principal}; the caller
-should release this memory by calling \funcname{krb5_free_principal} on
-\funcparam{*principal} when finished.
-
-Requires that \funcparam{id} identifies a valid credentials cache.
-
-\begin{funcdecl}{krb5_cc_start_seq_get}{krb5_error_code}{\funcin}
-\funcarg{krb5_ccache}{id}
-\funcout
-\funcarg{krb5_cc_cursor *}{cursor}
-\end{funcdecl}
-
-Prepares to sequentially read every set of cached credentials.
-Requires that \funcparam{id} identifies a valid credentials cache opened by
-\funcname{krb5_cc_open}.
-\funcparam{cursor} is filled in with a cursor to be used in calls to
-\funcname{krb5_cc_next_cred}.
-
-\begin{funcdecl}{krb5_cc_next_cred}{krb5_error_code}{\funcin}
-\funcarg{krb5_ccache}{id}
-\funcout
-\funcarg{krb5_credentials *}{creds}
-\funcinout
-\funcarg{krb5_cc_cursor *}{cursor}
-\end{funcdecl}
-
-Fetches the next entry from \funcparam{id}, returning its values in
-\funcparam{*creds}, and updates \funcparam{*cursor} for the next request.
-Requires that \funcparam{id} identifies a valid credentials cache and
-\funcparam{*cursor} be a cursor returned by
-\funcname{krb5_cc_start_seq_get} or a subsequent call to
-\funcname{krb5_cc_next_cred}.
-
-Errors: error code if no more cache entries.
-
-\begin{funcdecl}{krb5_cc_end_seq_get}{krb5_error_code}{\funcin}
-\funcarg{krb5_ccache}{id}
-\funcarg{krb5_cc_cursor *}{cursor}
-\end{funcdecl}
-
-Finishes sequential processing mode and invalidates \funcparam{*cursor}.
-\funcparam{*cursor} must never be re-used after this call.
-
-Requires that \funcparam{id} identifies a valid credentials cache and
-\funcparam{*cursor} be a cursor returned by
-\funcname{krb5_cc_start_seq_get} or a subsequent call to
-\funcname{krb5_cc_next_cred}.
-
-Errors: may return error code if \funcparam{*cursor} is invalid.
-
-
-\begin{funcdecl}{krb5_cc_remove_cred}{krb5_error_code}{\funcin}
-\funcarg{krb5_ccache}{id}
-\funcarg{krb5_flags}{which}
-\funcarg{krb5_credentials *}{cred}
-\end{funcdecl}
-
-Removes any credentials from \funcparam{id} which match the principal
-name {cred{\ptsto}server} and the fields in \funcparam{cred} masked by
-\funcparam{which}.
-Requires that \funcparam{id} identifies a valid credentials cache.
-
-Errors: returns error code if nothing matches; returns error code if
-couldn't delete.
-
-\begin{funcdecl}{krb5_cc_set_flags}{krb5_error_code}{\funcin}
-\funcarg{krb5_ccache}{id}
-\funcarg{krb5_flags}{flags}
-\end{funcdecl}
-
-Sets the flags on the cache \funcparam{id} to \funcparam{flags}. Useful
-flags are defined in {\tt <krb5/ccache.h>}.
-
-
-\subsubsection{Glue functions}
-The following functions are implemented in the base library and serve to
-glue together the various types of credentials caches.
-
-
-\begin{funcdecl}{krb5_cc_resolve}{krb5_error_code}{\funcin}
-\funcarg{char *}{string_name}
-\funcout
-\funcarg{krb5_ccache *}{id}
-\end{funcdecl}
-
-Fills in \funcparam{id} with a ccache identifier which corresponds to
-the name in \funcparam{string_name}. The cache is left unopened.
-
-Requires that \funcparam{string_name} be of the form ``type:residual'' and
-``type'' is a type known to the library.
-
-\begin{funcdecl}{krb5_cc_generate_new}{krb5_error_code}{\funcin}
-\funcarg{krb5_cc_ops *}{ops}
-\funcout
-\funcarg{krb5_ccache *}{id}
-\end{funcdecl}
-
-
-Fills in \funcparam{id} with a unique ccache identifier of a type defined by
-\funcparam{ops}. The cache is left unopened.
-
-\begin{funcdecl}{krb5_cc_register}{krb5_error_code}{\funcin}
-\funcarg{krb5_cc_ops *}{ops}
-\funcarg{krb5_boolean}{override}
-\end{funcdecl}
-
-Adds a new cache type identified and implemented by \funcparam{ops} to
-the set recognized by \funcname{krb5_cc_resolve}.
-If \funcparam{override} is FALSE, a ticket cache type named
-\funcparam{ops{\ptsto}prefix} must not be known.
-
-\begin{funcdecl}{krb5_cc_get_name}{char *}{\funcin}
-\funcarg{krb5_ccache}{id}
-\end{funcdecl}
-
-Returns the name of the ccache denoted by \funcparam{id}.
-
-\begin{funcdecl}{krb5_cc_default_name}{char *}{\funcvoid}
-\end{funcdecl}
-
-Returns the name of the default credentials cache; this may be equivalent to
-\funcnamenoparens{getenv}({\tt "KRB5CCACHE"}) with an appropriate fallback.
-
-\begin{funcdecl}{krb5_cc_default}{krb5_error_code}{\funcout}
-\funcarg{krb5_ccache *}{ccache}
-\end{funcdecl}
-
-Equivalent to
-\funcnamenoparens{krb5_cc_resolve}(\funcname{krb5_cc_default_name},
-\funcparam{ccache}).
-
+++ /dev/null
-% fixunder.sty, 31 May 1990, John T. Kohl
-%
-% The contents of this file are in the public domain.
-%
-%
-% play games with _ to make it active and to provide a reasonable _
-% character (from \tt in most cases), and a discretionary word-break point.
-
-%
-% Some \makeunder... macros for convenience in setting catcodes.
-%
-\def\makeunderactive{\catcode`\_=\active\relax}
-\def\makeunderother{\catcode`\_=12\relax}
-\def\makeunderletter{\catcode`\_=11\relax}
-\def\makeundernormal{\catcode`\_=8\relax}
-\makeunderother
-\def\cctwlunder{_}
-
-%
-% The hair here is to allow things like \index to work reasonably with
-% the new definition of underscore when the argument to index is part of
-% a macro replacement and as such gets tokenized before \index is
-% evaluated.
-% [in the normal case at top-level, \index{foo_bar} works since \index
-% does some hair to make _ into a reasonable character code, and \index
-% does NOT use a macro expansion. If you have something like
-% \def\foo#1#2{\index{#1} bar #2}
-% then \foo{baz_quux}{frobnitz} will result in baz_quux getting
-% tokenized BEFORE \foo is expanded, so that the catcode hair in \index
-% is to no avail.]
-%
-% \underrealfalse declares that you want to replace with the \tt _;
-% \underrealtrue declares that you want to replace with \char95 (ASCII _).
-%
-% for things like \index which write things out to files, set
-% \underrealfalse before evaluating the \index macro, and what actually
-% gets written to the file is an _, rather than something like
-% {\leavemode \kern... } (the typical definition of \_).
-%
-% the above example would then be
-% \def\foo#1#2{\underrealfalse\index{#1}\underrealtrue bar #2}
-%
-
-\newif\ifunderreal
-\underrealfalse
-\makeunderactive
-\def_{\ifunderreal\cctwlunder\else\leavevmode {\tt \cctwlunder}\discretionary{}{}{}\fi}
-\let\_=_
+++ /dev/null
-%
-% definitions related to function declarations/displays
-%
-\ifx\undefined\@psfonts
-\def\argfont{\tt}
-\else
-\font\argfont = c-bol
-\hyphenchar\argfont = -1
-\fi
-\let\funcfont=\bf
-\newcount\argc@ount
-%\setlength{\marginparsep}{0.05in}
-%\setlength{\marginparwidth}{1.45in}
-%
-% This function fixes up the function name to be displayed in the
-% margin so that the krb5_, if any, is stripped.
-%
-% Note: this is a hack; what's really happening is that name beginning with
-% krb5 will have its first five characters stripped from it.
-% This means that 'Krb5abc' will get rewritten to be 'bc'.
-% Unfortunately, we can't do better because of the underscore
-% hacks that are going on elsewhere.
-%
-% WARNING: This is ugly; don't look at it too soon after lunch!
-% [tytso:19900920.2231EDT]
-\newif\if@krbfunc
-\def\endkrb{}
-\def\fix@parname#1{\expandafter\parse@krb#1\endkrb%
-\endkrb\endkrb\endkrb\endkrb}% In case the argument is less
-% than five letters, we don't want to
-% lose on the argument parsing.
-\def\parse@krb#1#2#3#4#5#6\endkrb{\@krbfuncfalse%
-\if#1k\if#2r\if#3b\if#45\@krbfunctrue\fi\fi\fi\fi%
-\if@krbfunc#6\else#1#2#3#4#5#6\fi}
-%
-% funcdecl is used as \begin{funcdecl}{funcname}{return type}{firstline}
-%
-% see fixunder.sty for comments on why the \underrealtrue & \underrealfalse
-% stuff is here.
-\newenvironment{funcdecl}[3]{\underrealtrue\index{#1}\underrealfalse%
-\medbreak
-\gdef\funcn@me{#1}
-\argc@ount=0\noindent\marginpar[{{\sloppy \fix@parname{\funcn@me}}}]%
-{{\sloppy \hfill\fix@parname{\funcn@me}}}%
-\vbox\bgroup\begin{minipage}[t]{\textwidth}\begin{tabbing}
-#2 \\
-{\bf #1}(\= \+ #3%
-}{)
-\end{tabbing}\vfil\end{minipage}\egroup\par\nopagebreak
-}
-\newcommand{\docomm@}{\ifnum\argc@ount >0, \\\fi}
-\newcommand{\funcvoid}{\argc@ount=0}
-\newcommand{\funcin}{\docomm@\argc@ount=0{\sl /* IN */}\\}
-\newcommand{\funcinout}{\docomm@\argc@ount=0{\sl /* INOUT */}\\}
-\newcommand{\funcout}{\docomm@\argc@ount=0{\sl /* OUT */}\\}
-\newcommand{\funcarg}[2]{\docomm@#1 {\argfont #2}\advance\argc@ount by1}
-\newcommand{\funcparam}[1]{{\argfont #1}}
-\newcommand{\funcfuncarg}[2]{\docomm@#1 {\argfont #2}(\= \+ \argc@ount=0}
-\newcommand{\funcendfuncarg}{), \- \\ \argc@ount=0}
-\newcommand{\libname}[1]{{\argfont #1}}
-\newcommand{\globalname}[1]{{\argfont #1}}
-\newcommand{\ptsto}{->\discretionary{}{}{}}
-\newcommand{\datatype}[1]{{\bf #1}}
-\newcommand{\filename}[1]{{\sl #1\/}}
-
-\newcommand{\funcname}[1]{\underrealtrue\index{#1}\underrealfalse{\funcfont #1}()}
-\newcommand{\funcnamenoparens}[1]{\underrealtrue\index{#1}\underrealfalse{\funcfont #1}}
+++ /dev/null
-The key table functions deal with storing and retrieving service keys
-for use by unattended services which participate in authentication exchanges.
-
-Keytab routines should all be atomic. Every routine that acquires
-a non-sharable resource must release it before it returns. For
-example, an implementation is not allowed to leave a file open
-for writing or to have a lock on a file.
-
-Any keytab implementations must support multiple concurrent sequential scans.
-
-The order of values returned from \funcname{krb5_kt_next_entry} is
-unspecified and may be sorted to the implementor's convenience.
-
-Although the ``right thing'' should happen if the program aborts
-abnormally, a close routine is provided for freeing resources,
-etc. People should use the close routine when they are
-finished.
-
-\subsubsection{Per-type functions}
-The following entry points must be implemented for each type of
-key table; however, application programs are not expected to call
-\funcname{krb5_kt_resolve_internal}, \funcname{krb5_kt_remove_internal},
-or \funcname{krb5_kt_add_internal} directly.
-
-In order to reduce the size of binary programs when static linking is
-used, it is common to provide two \datatype{krb5_kt_ops} structures for
-each key table type, one for reading only in which the pointers to the
-add and delete functions are zero, and one for reading and writing.
-
-\begin{funcdecl}{krb5_kt_resolve_internal}{krb5_error_code}{\funcin}
-\funcarg{char *}{residual}
-\funcout
-\funcarg{krb5_keytab *}{id}
-\end{funcdecl}
-
-Fills in \funcparam{*id} with a handle identifying the keytab with name
-``residual''. The interpretation of ``residual'' is dependent on the
-type of keytab.
-
-\begin{funcdecl}{krb5_kt_get_name}{krb5_error_code}{\funcin}
-\funcarg{krb5_keytab}{id}
-\funcout
-\funcarg{char *}{name,}
-\funcin
-\funcarg{int}{namesize}
-\end{funcdecl}
-
-\funcarg{name} is filled in with the first \funcparam{namesize} bytes of
-the name of the keytab identified by \funcname{id}.
-If the name is shorter than \funcparam{namesize}, then \funcarg{name}
-will be null-terminated.
-
-\begin{funcdecl}{krb5_kt_close}{krb5_error_code}{\funcin}
-\funcarg{krb5_keytab}{id}
-\end{funcdecl}
-
-Closes the keytab identified by \funcparam{id} and invalidates
-\funcparam{id}, and releases any other resources acquired during use of
-the key table.
-
-Requires that \funcparam{id} identifies a valid credentials cache.
-
-\begin{funcdecl}{krb5_kt_get_entry}{krb5_error_code}{\funcin}
-\funcarg{krb5_keytab}{id}
-\funcarg{krb5_principal}{principal}
-\funcarg{krb5_kvno}{vno}
-\funcout
-\funcarg{krb5_keytab_entry *}{entry}
-\end{funcdecl}
-
-Searches the keytab identified by \funcparam{id} for an entry whose
-principal matches \funcparam{principal} and
-whose key version number matches \funcparam{vno}. If \funcparam{vno} is
-zero, the first entry whose principal matches is returned.
-
-Returns an error code if no suitable entry is found. If an entry is
-found, the entry is returned in \funcparam{*entry}; its contents should
-be deallocated by calling \funcname{krb5_kt_free_entry} when no longer
-needed.
-
-\begin{funcdecl}{krb5_kt_free_entry}{krb5_error_code}{\funcinout}
-\funcarg{krb5_keytab_entry *}{entry}
-\end{funcdecl}
-
-Releases all storage allocated for \funcparam{entry}, which must point
-to a structure previously filled in by \funcname{krb5_kt_get_entry} or
-\funcname{krb5_kt_next_entry}.
-
-\begin{funcdecl}{krb5_kt_start_seq_get}{krb5_error_code}{\funcin}
-\funcarg{krb5_keytab}{id}
-\funcout
-\funcarg{krb5_kt_cursor *}{cursor}
-\end{funcdecl}
-
-Prepares to read sequentially every key in the keytab identified by
-\funcparam{id}.
-\funcparam{cursor} is filled in with a cursor to be used in calls to
-\funcname{krb5_kt_next_entry}.
-
-\begin{funcdecl}{krb5_kt_next_entry}{krb5_error_code}{\funcin}
-\funcarg{krb5_keytab}{id}
-\funcout
-\funcarg{krb5_keytab_entry *}{entry}
-\funcinout
-\funcarg{krb5_kt_cursor}{cursor}
-\end{funcdecl}
-
-Fetches the ``next'' entry in the keytab, returning it in
-\funcparam{*entry}, and updates \funcparam{*cursor} for the next
-request. If the keytab changes during the sequential get, an error is
-guaranteed. \funcparam{*entry} should be freed after use by calling
-\funcname{krb5_kt_free_entry}.
-
-Requires that \funcparam{id} identifies a valid credentials cache. and
-\funcparam{*cursor} be a cursor returned by
-\funcname{krb5_kt_start_seq_get} or a subsequent call to
-\funcname{krb5_kt_next_entry}.
-
-Errors: error code if no more cache entries or if the keytab changes.
-
-\begin{funcdecl}{krb5_kt_end_seq_get}{krb5_error_code}{\funcin}
-\funcarg{krb5_keytab}{id}
-\funcarg{krb5_kt_cursor}{cursor}
-\end{funcdecl}
-
-Finishes sequential processing mode and invalidates \funcparam{cursor},
-which must never be re-used after this call.
-
-Requires that \funcparam{id} identifies a valid credentials cache. and
-\funcparam{*cursor} be a cursor returned by
-\funcname{krb5_kt_start_seq_get} or a subsequent call to
-\funcname{krb5_kt_next_entry}.
-
-May return error code if \funcparam{cursor} is invalid.
-
-\begin{funcdecl}{krb5_kt_remove_internal}{krb5_error_code}{\funcin}
-\funcarg{krb5_keytab}{id}
-\funcarg{krb5_keytab_entry *}{entry}
-\end{funcdecl}
-
-Searches the keytab \funcparam{id} for an entry that exactly matches
-\funcparam{entry}. If one is found, it is removed from the keytab.
-
-Returns an error code if not found.
-
-
-\begin{funcdecl}{krb5_kt_add_internal}{krb5_error_code}{\funcin}
-\funcarg{krb5_keytab}{id}
-\funcarg{krb5_keytab_entry *}{entry}
-\end{funcdecl}
-
-Stores \funcparam{entry} in the keytab \funcparam{id}.
-Fails if the entry already exists.
-
-This operation must, within the constraints of the operating system, not
-return until it can verify that the write has completed succesfully.
-For example, in a UNIX file-based implementation, this routine (or the part
-of the underlying implementation that it calls) would be responsible for
-doing an \funcname{fsync} on the file before returning.
-
-Returns an error code if \funcparam{entry} is already present in the
-keytab or if the key could not be stored (quota problem, etc).
-
-
-\subsubsection{Glue functions}
-The following functions are implemented in the base library and serve to
-glue together the various types of key tables.
-
-\begin{funcdecl}{krb5_kt_register}{krb5_error_code}{\funcin}
-\funcarg{krb5_kt_ops *}{ops}
-\end{funcdecl}
-
-
-Adds a new ticket cache type to the set recognized by
-\funcname{krb5_kt_resolve}.
-Requires that a keytab type named \funcparam{ops{\ptsto}prefix} is not
-yet known.
-
-An error is returned if \funcparam{ops{\ptsto}prefix} is already known.
-
-\begin{funcdecl}{krb5_kt_resolve}{krb5_error_code}{\funcin}
-\funcarg{char *}{string_name}
-\funcout
-\funcarg{krb5_keytab *}{id}
-\end{funcdecl}
-
-Fills in \funcparam{*id} with a handle identifying the keytab with name
-``string_name''. The keytab is not opened.
-Requires that \funcparam{string_name} be of the form ``type:residual'' and
-``type'' is a type known to the library.
-
-Errors: badly formatted name.
-
-\begin{funcdecl}{krb5_kt_default_name}{krb5_error_code}{\funcin}
-\funcarg{char *}{name}
-\funcarg{int}{namesize}
-\end{funcdecl}
-
-\funcparam{name} is filled in with the first \funcparam{namesize} bytes of
-the name of the default keytab.
-If the name is shorter than \funcparam{namesize}, then the remainder of
-\funcparam{name} will be zeroed.
-
-
-\begin{funcdecl}{krb5_kt_default}{krb5_error_code}{\funcin}
-\funcarg{krb5_keytab *}{id}
-\end{funcdecl}
-
-Fills in \funcparam{id} with a handle identifying the default keytab.
-
-\begin{funcdecl}{krb5_kt_read_service_key}{krb5_error_code}{\funcin}
-\funcarg{krb5_pointer}{keyprocarg}
-\funcarg{krb5_principal}{principal}
-\funcarg{krb5_kvno}{vno}
-\funcout
-\funcarg{krb5_keyblock **}{key}
-\end{funcdecl}
-
-This function is suitable for use as a parameter to
-\funcname{krb5_rd_req}.
-
-If \funcname{keyprocarg} is not NULL, it is taken to be a
-\datatype{char *} denoting the name of a keytab. Otherwise, the default
-keytab will be used.
-The keytab is opened and searched for the entry identified by
-\funcparam{principal} and \funcparam{vno}, returning the resulting key
-in \funcparam{*key} or returning an error code if it is not found.
-
-\funcname{krb5_free_keyblock} should be called on \funcparam{*key} when
-the caller is finished with the key.
-
-Returns an error code if the entry is not found.
-
-\begin{funcdecl}{krb5_kt_add_entry}{krb5_error_code}{\funcin}
-\funcarg{krb5_keytab}{id}
-\funcarg{krb5_keytab_entry *}{entry}
-\end{funcdecl}
-
-Calls the keytab-specific add routine \funcname{krb5_kt_add_internal}
-with the same function arguments. If this routine is not available,
-then KRB5_KT_NOWRITE is returned.
-
-\begin{funcdecl}{krb5_kt_remove_entry}{krb5_error_code}{\funcin}
-\funcarg{krb5_keytab}{id}
-\funcarg{krb5_keytab_entry *}{entry}
-\end{funcdecl}
-
-Calls the keytab-specific remove routine
-\funcname{krb5_kt_remove_internal} with the same function arguments.
-If this routine is not available, then KRB5_KT_NOWRITE is returned.
+++ /dev/null
-The main functions deal with the nitty-gritty details: verifying
-tickets, creating authenticators, and the like.
-
-\begin{funcdecl}{krb5_encode_kdc_rep}{krb5_error_code}{\funcin}
-\funcarg{krb5_msgtype}{type}
-\funcarg{krb5_enc_kdc_rep_part *}{encpart}
-\funcarg{krb5_keyblock *}{client_key}
-\funcinout
-\funcarg{krb5_kdc_rep *}{dec_rep}
-\funcout
-\funcarg{krb5_data *}{enc_rep}
-\end{funcdecl}
-
-Takes KDC rep parts in \funcparam{*rep} and \funcparam{*encpart}, and
-formats it into \funcparam{*enc_rep}, using message type \funcparam{type}
-and encryption key \funcparam{client_key} and encryption type
-\funcparam{dec_rep{\ptsto}etype}.
-
-\funcparam{enc_rep{\ptsto}data} will point to allocated storage upon
-non-error return; the caller should free it when finished.
-
-Returns system errors.
-
-\begin{funcdecl}{krb5_decode_kdc_rep}{krb5_error_code}{\funcin}
-\funcarg{krb5_data *}{enc_rep}
-\funcarg{krb5_keyblock *}{key}
-\funcarg{krb5_enctype}{etype}
-\funcout
-\funcarg{krb5_kdc_rep **}{dec_rep}
-\end{funcdecl}
-
-Takes a KDC_REP message and decrypts encrypted part using
-\funcparam{etype} and \funcparam{*key}, putting result in \funcparam{*dec_rep}.
-The pointers in \funcparam{dec_rep}
-are all set to allocated storage which should be freed by the caller
-when finished with the response (by using \funcname{krb5_free_kdc_rep}).
-
-
-If the response isn't a KDC_REP (tgs or as), it returns an error from
-the decoding routines (usually ISODE_50_LOCAL_ERR_BADDECODE).
-
-Returns errors from encryption routines, system errors.
-
-\begin{funcdecl}{krb5_kdc_rep_decrypt_proc}{krb5_error_code}{\funcin}
-\funcarg{krb5_keyblock *}{key}
-\funcarg{krb5_pointer}{decryptarg}
-\funcinout
-\funcarg{krb5_kdc_rep *}{dec_rep}
-\end{funcdecl}
-
-Decrypt the encrypted portion of \funcparam{dec_rep}, using the
-encryption key \funcparam{key}. \funcparam{decryptarg} is ignored.
-
-The result is in allocated storage pointed to by
-\funcparam{dec_rep{\ptsto}enc_part2}, unless some error occurs.
-
-This function is suitable for use as the \funcparam{decrypt_proc}
-argument to \funcname{krb5_get_in_tkt}.
-
-\begin{funcdecl}{krb5_encrypt_tkt_part}{krb5_error_code}{ \funcin}
-\funcarg{krb5_keyblock *}{srv_key}
-\funcinout
-\funcarg{krb5_ticket *}{dec_ticket}
-\end{funcdecl}
-
-Takes unencrypted \funcparam{dec_ticket} and
-\funcparam{dec_ticket{\ptsto}enc_part2}, encrypts with
-\funcparam{dec_ticket{\ptsto}etype}
-using \funcparam{srv_key}, and places result in
-\funcparam{dec_ticket{\ptsto}enc_part}.
-The string \funcparam{dec_ticket{\ptsto}enc_part} will be allocated
-before formatting.
-
-Returns errors from encryption routines, system errors
-
-\funcparam{enc_part{\ptsto}data} is allocated and filled in with
-encrypted stuff.
-
-\begin{funcdecl}{krb5_decrypt_tkt_part}{krb5_error_code}{\funcin}
-\funcarg{krb5_keyblock *}{srv_key}
-\funcinout
-\funcarg{krb5_ticket *}{dec_ticket}
-\end{funcdecl}
-
-Takes encrypted \funcparam{dec_ticket{\ptsto}enc_part}, encrypts with
-\funcparam{dec_ticket{\ptsto}etype}
-using \funcparam{srv_key}, and places result in
-\funcparam{dec_ticket{\ptsto}enc_part2}. The storage of
-\funcparam{dec_ticket{\ptsto}enc_part2} will be allocated before return.
-
-Returns errors from encryption routines, system errors
-
-\begin{funcdecl}{krb5_send_tgs}{krb5_error_code}{\funcin}
-\funcarg{krb5_flags}{options}
-\funcarg{krb5_ticket_times *}{timestruct}
-\funcarg{krb5_enctype}{etype}
-\funcarg{krb5_cksumtype}{sumtype}
-\funcarg{krb5_principal}{sname}
-\funcarg{krb5_address **}{addrs}
-\funcarg{krb5_authdata **}{authorization_data}
-\funcarg{krb5_data *}{second_ticket}
-\funcinout
-\funcarg{krb5_creds *}{usecred}
-\funcout
-\funcarg{krb5_response *}{rep}
-\end{funcdecl}
-
-Sends a request to the TGS and waits for a response.
-\funcparam{options} is used for the options in the KRB_TGS_REQ.
-\funcparam{timestruct} values are used for from, till, and rtime in the
-KRB_TGS_REQ.
-\funcparam{etype} is used for etype in the KRB_TGS_REQ.
-\funcparam{sumtype} is used for the checksum in the AP_REQ in the KRB_TGS_REQ.
-\funcparam{sname} is used for sname in the KRB_TGS_REQ.
-\funcparam{addrs}, if non-NULL, is used for addresses in the KRB_TGS_REQ.
-\funcparam{authorization_dat}, if non-NULL, is used for authorization_dat in the KRB_TGS_REQ.
-\funcparam{second_ticket}, if required by options, is used for the 2nd
-ticket in the KRB_TGS_REQ.
-\funcparam{usecred} is used for the ticket and session key in the KRB_AP_REQ header in the KRB_TGS_REQ.
-
-The KDC realm is extracted from \funcparam{usecred{\ptsto}server}'s realm.
-
-The response is placed into \funcparam{*rep}.
-\funcparam{rep{\ptsto}response.data} is set to point at allocated storage
-which should be freed by the caller when finished.
-
-Returns system errors.
-
-\begin{funcdecl}{krb5_get_cred_from_kdc}{krb5_error_code}{\funcin}
-\funcarg{krb5_ccache}{ccache}
-\funcinout
-\funcarg{krb5_creds *}{creds}
-\funcout
-\funcparam{krb5_creds ***}{tgts }
-\end{funcdecl}
-
-Retrieve credentials for principal \funcparam{creds{\ptsto}client},
-server \funcparam{creds{\ptsto}server},
-ticket flags \funcparam{creds{\ptsto}ticket_flags}, possibly
-\funcparam{creds{\ptsto}second_ticket} if needed by the ticket flags.
-
-\funcparam{ccache} is used to fetch initial TGT's to start the authentication
-path to the server.
-
-Credentials are requested from the KDC for the server's realm. Any
-TGT credentials obtained in the process of contacting the KDC are
-returned in an array of credentials; \funcparam{tgts} is filled in to
-point to an array of pointers to credential structures (if no TGT's were
-used, the pointer is zeroed). TGT's may be returned even if no useful
-end ticket was obtained.
-
-The returned credentials are NOT cached.
-
-If credentials are obtained, \funcparam{creds} is filled in with the results;
-\funcparam{creds{\ptsto}ticket} and
-\funcparam{creds{\ptsto}keyblock{\ptsto}key} are set to allocated storage,
-which should be freed by the caller when finished.
-
-Returns errors, system errors.
-
-
-\begin{funcdecl}{krb5_free_tgt_creds}{void}{\funcin}
-\funcarg{krb5_creds **}{tgts}
-\end{funcdecl}
-
-Frees the TGT credentials \funcparam{tgts} returned by
-\funcname{krb5_get_cred_from_kdc}.
-
-\begin{funcdecl}{krb5_get_credentials}{krb5_error_code}{\funcin}
-\funcarg{krb5_flags}{options}
-\funcarg{krb5_ccache}{ccache}
-\funcinout
-\funcarg{krb5_creds *}{creds}
-\end{funcdecl}
-
-Attempts to use the credentials cache \funcparam{ccache} or a TGS
-exchange to get an additional ticket for the client identified by
-\funcparam{creds{\ptsto}client}, the server identified by
-\funcparam{creds{\ptsto}server}, with options \funcparam{options},
-expiration date specified in \funcparam{creds{\ptsto}times.endtime} (0
-means as long as possible), session key type specified in
-\funcparam{creds{\ptsto}keyblock.keytype} (if non-zero).
-
-Any returned ticket and intermediate ticket-granting tickets are
-stored in \funcparam{ccache}.
-
-Returns errors from encryption routines, system errors.
-
-\begin{funcdecl}{krb5_get_in_tkt}{krb5_error_code}{\funcin}
-\funcarg{krb5_flags}{options}
-\funcarg{krb5_address **}{addrs}
-\funcarg{krb5_enctype}{etype}
-\funcarg{krb5_keytype}{keytype}
-\funcfuncarg{krb5_error_code}{(*key_proc)}
- \funcarg{krb5_keytype}{type}
- \funcarg{krb5_keyblock **}{key}
- \funcarg{krb5_pointer}{keyseed}
-\funcendfuncarg
-\funcarg{krb5_pointer}{keyseed}
-\funcfuncarg{krb5_error_code}{(*decrypt_proc)}
- \funcarg{krb5_keyblock *}{key}
- \funcarg{krb5_pointer}{decryptarg}
- \funcarg{krb5_kdc_rep *}{dec_rep}
-\funcendfuncarg
-\funcarg{krb5_pointer}{decryptarg}
-\funcinout
-\funcarg{krb5_creds *}{creds}
-\funcarg{krb5_ccache}{ccache}
-\end{funcdecl}
-
-All-purpose initial ticket routine, usually called via
-\funcname{krb5_get_in_tkt_with_password} or
-\funcname{krb5_get_in_tkt_with_skey}.
-
-Attempts to get an initial ticket for \funcparam{creds{\ptsto}client} to use server
-\funcparam{creds{\ptsto}server}, (realm is taken from
-\funcparam{creds{\ptsto}client}), with options
-\funcparam{options}, requesting encryption type \funcparam{etype}, and using
-\funcparam{creds{\ptsto}times.starttime}, \funcparam{creds{\ptsto}times.endtime},
-\funcparam{creds{\ptsto}times.renew_till}
-as from, till, and rtime. \funcparam{creds{\ptsto}times.renew_till} is
-ignored unless the RENEWABLE option is requested.
-
-\funcparam{key_proc} is called to fill in the key to be used for decryption.
-\funcparam{keyseed} is passed on to \funcparam{key_proc}.
-
-\funcparam{decrypt_proc} is called to perform the decryption of the
-response (the encrypted part is in \funcparam{dec_rep{\ptsto}enc_part}; the
-decrypted part should be allocated and filled into
-\funcparam{dec_rep{\ptsto}enc_part2}.
-\funcparam{decryptarg} is passed on to \funcparam{decrypt_proc}.
-
-If \funcparam{addrs} is non-NULL, it is used for the addresses
-requested. If it is null, the system standard addresses are used.
-
-A succesful call will place the ticket in the credentials cache
-\funcparam{ccache} and fill in \funcparam{creds} with the ticket
-information used/returned.
-
-Returns system errors, encryption errors.
-
-\begin{funcdecl}{krb5_get_in_tkt_with_password}{krb5_error_code}{\funcin}
-\funcarg{krb5_flags}{options}
-\funcarg{krb5_address **}{addrs}
-\funcarg{krb5_enctype}{etype}
-\funcarg{krb5_keytype}{keytype}
-\funcarg{char *}{password}
-\funcarg{krb5_ccache}{ccache}
-\funcinout
-\funcarg{krb5_creds *}{creds}
-\end{funcdecl}
-
-
-Attempts to get an initial ticket for \funcparam{creds{\ptsto}client} to use server
-\funcparam{creds{\ptsto}server}, (realm is taken from
-\funcparam{creds{\ptsto}client}), with options
-\funcparam{options}, requesting encryption type \funcparam{etype}, and using
-\funcparam{creds{\ptsto}times.starttime},
-\funcparam{creds{\ptsto}times.endtime},
-\funcparam{creds{\ptsto}times.renew_till}
-as from, till, and rtime. \funcparam{creds{\ptsto}times.renew_till} is
-ignored unless the RENEWABLE option is requested.
-
-If \funcparam{addrs} is non-NULL, it is used for the addresses
-requested. If it is null, the system standard addresses are used.
-
-If \funcparam{password} is non-NULL, it is converted using the
-cryptosystem entry point for a string conversion routine, seeded with
-the client's principal name. If \funcparam{password} is passed as NULL,
-the password is read from the terminal, and then converted into a key.
-
-A succesful call will place the ticket in the credentials cache
-\funcparam{ccache}.
-
-Returns system errors, encryption errors.
-
-\begin{funcdecl}{krb5_get_in_tkt_with_skey}{krb5_error_code}{\funcin}
-\funcarg{krb5_flags}{options}
-\funcarg{krb5_address **}{addrs}
-\funcarg{krb5_enctype}{etype}
-\funcarg{krb5_keyblock *}{key}
-\funcarg{krb5_ccache}{ccache}
-\funcinout
-\funcarg{krb5_creds *}{creds}
-\end{funcdecl}
-Similar to \funcname{krb5_get_in_tkt_with_password}.
-
-Attempts to get an initial ticket for \funcparam{creds{\ptsto}client} to use server
-\funcparam{creds{\ptsto}server}, (realm is taken from
-\funcparam{creds{\ptsto}client}), with options \funcparam{options}, requesting
-encryption type \funcparam{etype}, and using
-\funcparam{creds{\ptsto}times.starttime}, \funcparam{creds{\ptsto}times.endtime},
-\funcparam{creds{\ptsto}times.renew_till} as from, till, and rtime.
-\funcparam{creds{\ptsto}times.renew_till} is ignored unless the
-RENEWABLE option is requested.
-
-If \funcparam{addrs} is non-NULL, it is used for the addresses
-requested. If it is null, the system standard addresses are used.
-
-If \funcparam{keyblock} is NULL, an appropriate key for
-\funcparam{creds{\ptsto}client} is retrieved from the system key store (e.g.
-\filename{/etc/v5srvtab}). If \funcparam{keyblock} is non-NULL, it is
-used as the decryption key.
-
-A succesful call will place the ticket in the credentials cache
-\funcparam{ccache}.
-
-Returns system errors, encryption errors.
-
-\begin{funcdecl}{krb5_mk_req}{krb5_error_code}{\funcin}
-\funcarg{krb5_principal}{server}
-\funcarg{krb5_flags}{ap_req_options}
-\funcarg{krb5_checksum *}{checksum}
-\funcarg{krb5_ccache}{ccache}
-\funcout
-\funcarg{krb5_data *}{outbuf}
-\end{funcdecl}
-
-Formats a KRB_AP_REQ message into \funcparam{outbuf}.
-
-\funcparam{server} specifies the principal of the server to receive the
-message; if credentials are not present in the credentials cache
-\funcparam{ccache} for this server, the TGS request with default
-parameters is used in an attempt to obtain such credentials, and they
-are stored in \funcparam{ccache}.
-
-\funcparam{ap_req_options} specifies the KRB_AP_REQ options desired.
-
-\funcparam{checksum} specifies the checksum to be used in the authenticator.
-
-The \funcparam{outbuf} buffer storage is allocated, and should be freed
-by the caller when finished.
-
-Returns system errors.
-
-
-\begin{funcdecl}{krb5_mk_req_extended}{krb5_error_code}{\funcin}
-\funcarg{krb5_flags}{ap_req_options}
-\funcarg{krb5_checksum *}{checksum}
-\funcarg{krb5_ticket_times *}{times}
-\funcarg{krb5_flags}{kdc_options}
-\funcarg{krb5_ccache}{ccache}
-\funcinout
-\funcarg{krb5_creds *}{creds}
-\funcarg{krb5_authenticator *}{authentp}
-\funcout
-\funcarg{krb5_data *}{outbuf}
-\end{funcdecl}
-
-Formats a KRB_AP_REQ message into \funcparam{outbuf}, with more complete
-options than \funcname{krb5_mk_req}.a
-
-\funcparam{outbuf}, \funcparam{ap_req_options}, \funcparam{checksum},
-and \funcparam{ccache} are used in the same fashion as for
-\funcname{krb5_mk_req}.
-
-\funcparam{creds} is used to supply the credentials (ticket and session
-key) needed to form the request.
-
-If \funcparam{creds{\ptsto}ticket} has no data (length == 0), then a
-ticket is obtained from either \funcparam{ccache} or the TGS, passing
-\funcparam{creds} to \funcname{krb5_get_credentials}.
-\funcparam{kdc_options} specifies the options requested for the ticket
-to be used. If a ticket with appropriate flags is not found in
-\funcparam{ccache}, then these options are passed on in a request to an
-appropriate KDC.
-
-\funcparam{ap_req_options} specifies the KRB_AP_REQ options desired.
-
-If \funcparam{ap_req_options} specifies AP_OPTS_USE_SESSION_KEY, then
-\funcparam{creds{\ptsto}ticket} must contain the appropriate
-ENC-TKT-IN-SKEY ticket.
-
-\funcparam{checksum} specifies the checksum to be used in the
-authenticator.
-
-If \funcparam{authentp} is non-NULL, it krb5_mk_req_extended will store
-a copy of authenticator there, with the principal and checksum fields
-nulled out. (This is to prevent pointer sharing problems; the caller
-shouldn't need these fields anyway, since the caller supplied them.)
-
-The \funcparam{outbuf} buffer storage is allocated, and should be freed
-by the caller when finished.
-
-On an error return, the credentials pointed to by \funcparam{creds}
-might have been augmented with additional fields from the obtained
-credentials; the entire credentials should be released by calling
-\funcname{krb5_free_creds}.
-
-Returns system errors.
-
-\begin{funcdecl}{krb5_rd_req_simple}{krb5_error_code}{\funcin}
-\funcarg{const krb5_data *}{inbuf}
-\funcarg{krb5_const_principal}{server}
-\funcarg{const krb5_address *}{sender_addr}
-\funcout
-\funcarg{krb5_tkt_authent *}{authdat}
-\end{funcdecl}
-
-Parses a KRB_AP_REQ message, returning its contents.
-
-\funcparam{server} specifies the expected server's name for the ticket.
-
-\funcparam{sender_addr} specifies the address(es) expected to be present
-in the ticket.
-
-A replay cache name derived from the first component of the service name
-is used.
-
-The default key store is consulted to find the service key.
-
-\funcparam{authdat{\ptsto}ticket} and
-\funcparam{authdat{\ptsto}authenticator} are set to allocated storage
-structures; the caller should free them when finished.
-
-Returns system errors, encryption errors, replay errors.
-
-
-\begin{funcdecl}{krb5_rd_req}{krb5_error_code}{\funcin}
-\funcarg{krb5_data *}{inbuf}
-\funcarg{krb5_principal}{server}
-\funcarg{krb5_address *}{sender_addr}
-\funcarg{krb5_pointer}{fetchfrom}
-\funcfuncarg{krb5_error_code}{(*keyproc)}
-\funcarg{krb5_pointer}{keyprocarg}
-\funcarg{krb5_principal}{principal}
-\funcarg{krb5_kvno}{vno}
-\funcarg{krb5_keyblock **}{key}
-\funcendfuncarg
-\funcarg{krb5_pointer}{keyprocarg}
-\funcinout
-\funcarg{krb5_rcache}{rcache}
-\funcout
-\funcarg{krb5_tkt_authent *}{authdat}
-\end{funcdecl}
-
-
-Parses a KRB_AP_REQ message, returning its contents.
-
-\funcparam{server} specifies the expected server's name for the ticket.
-If \funcparam{server} is NULL, then any server name will be accepted if
-the appropriate key can be found, and the caller should verify that the
-server principal matches some trust criterion.
-
-\funcparam{sender_addr} specifies the address(es) expected to be present
-in the ticket.
-
-\funcparam{rcache} specifies a replay detection cache used to store
-authenticators and server names. If \funcparam{rcache} is NULL, then no
-replay detection is performed.
-
-\funcparam{keyproc} specifies a procedure to generate a decryption key for the
-ticket. If \funcparam{keyproc} is non-NULL, \funcparam{keyprocarg} is
-passed to it, and the result used as a decryption key. If
-\funcparam{keyproc} is NULL, then \funcparam{fetchfrom} is checked; if
-it is non-NULL, it specifies a parameter name from which to retrieve the
-decryption key. If \funcparam{fetchfrom} is NULL, then the default key
-store is consulted.
-
-\funcparam{authdat{\ptsto}ticket} and
-\funcparam{authdat{\ptsto}authenticator} are set to allocated storage
-structures; the caller should free them when finished.
-
-Returns system errors, encryption errors, replay errors.
-
-\begin{funcdecl}{krb5_rd_req_decoded}{krb5_error_code}{\funcin}
-\funcarg{krb5_ap_req *}{req}
-\funcarg{krb5_principal}{server}
-\funcarg{krb5_address *}{sender_addr}
-\funcarg{krb5_pointer}{fetchfrom}
-\funcfuncarg{krb5_error_code}{(*keyproc)}
-\funcarg{krb5_pointer}{keyprocarg}
-\funcarg{krb5_principal}{principal}
-\funcarg{krb5_kvno}{vno}
-\funcarg{krb5_keyblock **}{key}
-\funcendfuncarg
-\funcarg{krb5_pointer}{keyprocarg}
-\funcarg{krb5_rcache}{rcache}
-\funcout
-\funcarg{krb5_tkt_authent *}{authdat}
-\end{funcdecl}
-
-Essentially the same as \funcname{krb5_rd_req}, but uses a decoded AP_REQ
-as the input rather than an encoded input.
-
-\begin{funcdecl}{krb5_mk_rep}{krb5_error_code}{\funcin}
-\funcarg{const krb5_ap_rep_enc_part *}{repl}
-\funcarg{const krb5_keyblock *}{kblock}
-\funcout
-\funcarg{krb5_data *}{outbuf}
-\end{funcdecl}
-
-Formats and encrypts an AP_REP message, using \funcparam{*repl} for the
-encrypted part of the message. The message is encrypted under the key
-in \funcparam{*kblock}, then encoded and left in outbuf.
-
-The output buffer storage is allocated, and should be freed by the
-caller when finished.
-
-Returns system errors.
-
-\begin{funcdecl}{krb5_rd_rep}{krb5_error_code}{\funcin}
-\funcarg{const krb5_data *}{inbuf}
-\funcarg{const krb5_keyblock *}{kblock}
-\funcout
-\funcarg{krb5_ap_rep_enc_part *}{repl}
-\end{funcdecl}
-
-Parses and decrypts an AP_REP message from \funcparam{*inbuf}, filling in
-the values in \funcparam{*repl} with the values from the message.
-
-The key in \funcparam{*kblock} is used to decrypt the message.
-
-Returns system errors.
-
-\begin{funcdecl}{krb5_mk_error}{krb5_error_code}{\funcin}
-\funcarg{krb5_error *}{dec_err}
-\funcout
-\funcarg{krb5_data *}{enc_err}
-\end{funcdecl}
-
-Formats the error structure \funcparam{*dec_err} into an error buffer
-\funcparam{*enc_err}.
-
-The error buffer storage is allocated, and should be freed by the
-caller when finished.
-
-Returns system errors.
-
-\begin{funcdecl}{krb5_rd_error}{krb5_error_code}{\funcin}
-\funcarg{krb5_data *}{enc_errbuf}
-\funcout
-\funcarg{krb5_error *}{dec_error}
-\end{funcdecl}
-
-Parses an error message from \funcparam{enc_errbuf} and fills in the
-contents of \funcparam{dec_error}.
-
-Upon return \funcparam{dec_error{\ptsto}client},
-\funcparam{dec_error{\ptsto}server}, and
-\funcparam{dec_error{\ptsto}text}, if non-NULL, point to allocated
-storage which the caller should free when finished.
-
-Returns system errors.
-
-\begin{funcdecl}{krb5_mk_safe}{krb5_error_code}{\funcin}
-\funcarg{krb5_data *}{userdata}
-\funcarg{krb5_cksumtype}{sumtype}
-\funcarg{krb5_keyblock *}{key,}
-\funcarg{krb5_fulladdr *}{sender_addr}
-\funcarg{krb5_fulladdr *}{recv_addr}
-\funcout
-\funcarg{krb5_data *}{outbuf}
-\end{funcdecl}
-
-Formats a KRB_SAFE message into \funcparam{outbuf}.
-
-\funcparam{userdata} is formatted as the user data in the message.
-\funcparam{sumtype} specifies the encryption type; \funcparam{key}
-specifies the key which might be used to seed the checksum;
-\funcparam{sender_addr} and \funcparam{recv_addr} specify the full
-addresses (host and port) of the sender and receiver. The host portion
-of \funcparam{sender_addr} is used to form the addresses used in the
-KRB_SAFE message.
-
-The \funcparam{outbuf} buffer storage is allocated, and should be freed by the
-caller when finished.
-
-Returns system errors.
-
-\begin{funcdecl}{krb5_rd_safe}{krb5_error_code}{\funcin}
-\funcarg{krb5_data *}{inbuf}
-\funcarg{krb5_keyblock *}{key}
-\funcarg{krb5_fulladdr *}{sender_addr}
-\funcarg{krb5_fulladdr *}{recv_addr}
-\funcout
-\funcarg{krb5_data *}{outbuf}
-\end{funcdecl}
-
-Parses a KRB_SAFE message from \funcparam{inbuf}, placing the
-integrity-protected user data in \funcparam{*outbuf}.
-
-\funcparam{key} specifies the key to be used for decryption of the message.
-
-\funcparam{sender_addr} and \funcparam{recv_addr} specify the full
-addresses (host and port) of the sender and receiver.
-
-\funcparam{outbuf} points to allocated storage which the caller should
-free when finished.
-
-Returns system errors, integrity errors.
-
-\begin{funcdecl}{krb5_mk_priv}{krb5_error_code}{\funcin}
-\funcarg{krb5_data *}{userdata}
-\funcarg{krb5_enctype}{etype}
-\funcarg{krb5_keyblock *}{key}
-\funcarg{krb5_fulladdr *}{sender_addr}
-\funcarg{krb5_fulladdr *}{recv_addr}
-\funcinout
-\funcarg{krb5_pointer}{i_vector}
-\funcout
-\funcarg{krb5_data *}{outbuf}
-\end{funcdecl}
-
-Formats a KRB_PRIV message into \funcparam{outbuf}.
-
-\funcparam{userdata} is formatted as the user data in the message.
-\funcparam{etype} specifies the encryption type; \funcparam{key}
-specifies the key for the encryption; \funcparam{sender_addr} and
-\funcparam{recv_addr} specify the full addresses (host and port) of the
-sender and receiver.
-
-\funcparam{i_vector} is used as an initialization vector for the
-encryption, and if non-NULL its contents are replaced with the last
-block of the encrypted data upon exit.
-
-The \funcparam{outbuf} buffer storage is allocated, and should be freed by the
-caller when finished.
-
-Returns system errors.
-
-\begin{funcdecl}{krb5_rd_priv}{krb5_error_code}{\funcin}
-\funcarg{krb5_data *}{inbuf}
-\funcarg{krb5_keyblock *}{key}
-\funcarg{krb5_fulladdr *}{sender_addr}
-\funcarg{krb5_fulladdr *}{recv_addr}
-\funcinout
-\funcarg{krb5_pointer}{i_vector}
-\funcout
-\funcarg{krb5_data *}{outbuf}
-\end{funcdecl}
-
-Parses a KRB_PRIV message from \funcparam{inbuf}, placing the confidential user
-data in \funcparam{*outbuf}.
-
-\funcparam{key} specifies the key to be used for decryption of the message.
-
-\funcparam{sender_addr} and \funcparam{recv_addr} specify the full
-addresses (host and port) of the sender and receiver.
-
-\funcparam{outbuf} points to allocated storage which the caller should
-free when finished.
-
-\funcparam{i_vector} is used as an initialization vector for the
-encryption, and if non-NULL its contents are replaced with the last
-block of the encrypted data upon exit.
-
-Returns system errors, integrity errors.
-
-\begin{funcdecl}{krb5_parse_name}{krb5_error_code}{\funcin}
-\funcarg{char *}{name}
-\funcout
-\funcarg{krb5_principal *}{principal}
-\end{funcdecl}
-
-Converts a single-string representation \funcparam{name} of the
-principal name to the multi-part principal format used in the protocols.
-
-\funcparam{*principal} will point to allocated storage which should be freed by
-the caller (using \funcname{krb5_free_principal}) after use.
-
-Returns system errors XXX.
-
-\begin{funcdecl}{krb5_unparse_name}{krb5_error_code}{\funcin}
-\funcarg{krb5_principal}{principal}
-\funcout
-\funcarg{char **}{name}
-\end{funcdecl}
-
-Converts the multi-part principal name \funcparam{principal} from the
-format used in the protocols to a single-string representation of the name.
-
-\funcparam{*name} points to allocated storage and should be freed by the caller
-when finished.
-
-Returns system errors XXX.
-
-\begin{funcdecl}{krb5_address_search}{krb5_boolean}{\funcin}
-\funcarg{krb5_address *}{addr}
-\funcarg{krb5_address **}{addrlist}
-\end{funcdecl}
-
-If \funcparam{addr} is listed in \funcparam{addrlist}, or
-\funcparam{addrlist} is null, return TRUE. If not listed, return FALSE.
-
-\begin{funcdecl}{krb5_address_compare}{krb5_boolean}{\funcin}
-\funcarg{krb5_address *}{addr1}
-\funcarg{krb5_address *}{addr2}
-\end{funcdecl}
-
-If the two addresses are the same, return TRUE, else return FALSE.
-
-\begin{funcdecl}{krb5_principal_compare}{krb5_boolean}{\funcin}
-\funcarg{krb5_principal}{p1}
-\funcarg{krb5_principal}{p2}
-\end{funcdecl}
-
-If the two principals are the same, return TRUE, else return FALSE.
-
-\begin{funcdecl}{krb5_fulladdr_order}{int}{\funcin}
-\funcarg{krb5_fulladdr *}{addr1}
-\funcarg{krb5_fulladdr *}{addr2}
-\end{funcdecl}
-
-Return an ordering on the two full addresses: 0 if the same,
-$< 0$ if first is less than 2nd, $> 0$ if first is greater than 2nd.
-
-\begin{funcdecl}{krb5_address_order}{int}{\funcin}
-\funcarg{const krb5_address *}{addr1}
-\funcarg{const krb5_address *}{addr2}
-\end{funcdecl}
-
-Return an ordering on the two addresses: 0 if the same,
-$< 0$ if first is less than 2nd, $> 0$ if first is greater than 2nd.
-
-\begin{funcdecl}{krb5_copy_keyblock}{krb5_error_code}{\funcin}
-\funcarg{krb5_keyblock *}{from}
-\funcout
-\funcarg{krb5_keyblock *}{to}
-\end{funcdecl}
-
-Copy a keyblock from \funcparam{from} to \funcparam{to}, including
-allocated storage.
-
-\begin{funcdecl}{krb5_copy_creds}{krb5_error_code}{\funcin}
-\funcarg{krb5_creds *}{incred}
-\funcout
-\funcarg{krb5_creds **}{outcred}
-\end{funcdecl}
-
-Copy a credentials structure, filling in \funcparam{*outcred} to point
-to the newly allocated copy, which should be freed with
-\funcname{krb5_free_creds}.
-
-\begin{funcdecl}{krb5_copy_data}{krb5_error_code}{\funcin}
-\funcarg{krb5_data *}{indata}
-\funcout
-\funcarg{krb5_data **}{outdata}
-\end{funcdecl}
-
-Copy a data strucutre, filling in \funcparam{*outdata} to point to the
-newly allocated copy, which should be freed with \funcname{krb5_free_data}.
-
-\begin{funcdecl}{krb5_copy_principal}{krb5_error_code}{\funcin}
-\funcarg{krb5_principal}{inprinc}
-\funcout
-\funcarg{krb5_principal *}{outprinc}
-\end{funcdecl}
-Copy a principal structure, filling in \funcparam{*outprinc} to point to
-the newly allocated copy, which should be freed with
-\funcname{krb5_free_principal}.
-
+++ /dev/null
-\documentstyle[newcen,fixunder,functions,twoside]{article}
-\setlength{\oddsidemargin}{0.25in}
-\setlength{\evensidemargin}{-0.25in}
-\setlength{\topmargin}{-.5in}
-\setlength{\textheight}{9in}
-\setlength{\parskip}{.1in}
-\setlength{\parindent}{2em}
-\setlength{\textwidth}{6.25in}
-
-\pagestyle{headings}
-\begin{document}
-\begin{center}
-{\Huge Kerberos V5 Data Encryption Standard library} \\
-{\Large DRAFT}
-\end{center}
-\section{DES functions}
-The DES functions conform to the encryption interface required by the
-Kerberos version 5 library, and provide an encryption mechanism based on
-the DES Cipher-block chaining mode (CBC), with the addition of a
-cyclical redundancy check (CRC-32) for integrity checking upon
-decryption.
-
-The functions have the same signatures as those described by the main
-library document; the names are:
-{\obeylines
-\funcname{mit_des_encrypt_func}
-\funcname{mit_des_decrypt_func}
-\funcname{mit_des_process_key}
-\funcname{mit_des_finish_key}
-\funcname{mit_des_string_to_key}
-\funcname{mit_des_init_random_key}
-\funcname{mit_des_finish_random_key}
-\funcname{mit_des_random_key}
-}
-The \datatype{krb5_cryptosystem_entry} for this cryptosystem is
-\globalname{mit_des_cryptosystem_entry}.
-
-\end{document}
+++ /dev/null
-The operating-system specific functions provide an interface between the
-other parts of the \libname{libkrb5.a} libraries and the operating system.
-
-Beware! Any of the functions below are allowed to be implemented as
-macros. Prototypes for functions can be found in {\tt
-<krb5/libos-proto.h>}; other definitions (including macros, if used) are
-in {\tt <krb5/libos.h>}.
-
-The following global symbols are provided in \libname{libos.a}. If you
-wish to substitute for any of them, you must substitute for all of them
-(they are all declared and initialized in the same object file):
-\begin{description}
-% These come from src/lib/osconfig.c
-\item[extern char *\globalname{krb5_config_file}:] name of configuration file
-\item[extern char *\globalname{krb5_trans_file}:] name of hostname/realm
-name translation file
-\item[extern char *\globalname{krb5_defkeyname}:] default name of key
-table file
-\item[extern char *\globalname{krb5_lname_file}:] name of aname/lname
-translation database
-\item[extern int \globalname{krb5_max_dgram_size}:] maximum allowable
-datagram size
-\item[extern int \globalname{krb5_max_skdc_timeout}:] maximum
-per-message KDC reply timeout
-\item[extern int \globalname{krb5_skdc_timeout_shift}:] shift factor
-(bits) to exponentially back-off the KDC timeouts
-\item[extern int \globalname{krb5_skdc_timeout_1}:] initial KDC timeout
-\item[extern char *\globalname{krb5_kdc_udp_portname}:] name of KDC UDP port
-\item[extern char *\globalname{krb5_default_pwd_prompt1}:] first prompt
-for password reading.
-\item[extern char *\globalname{krb5_default_pwd_prompt2}:] second prompt
-
-\end{description}
-
-\begin{funcdecl}{krb5_read_password}{krb5_error_code}{\funcin}
-\funcarg{char *}{prompt}
-\funcarg{char *}{prompt2}
-\funcout
-\funcarg{char *}{return_pwd}
-\funcinout
-\funcarg{int *}{size_return}
-\end{funcdecl}
-
-Read a password from the keyboard. The first \funcparam{*size_return}
-bytes of the password entered are returned in \funcparam{return_pwd}.
-If fewer than \funcparam{*size_return} bytes are typed as a password,
-the remainder of \funcparam{return_pwd} is zeroed. Upon success, the
-total number of bytes filled in is stored in \funcparam{*size_return}.
-
-\funcparam{prompt} is used as the prompt for the first reading of a password.
-It is printed to the terminal, and then a password is read from the
-keyboard. No newline or spaces are emitted between the prompt and the
-cursor, unless the newline/space is included in the prompt.
-
-If \funcparam{prompt2} is a null pointer, then the password is read
-once. If \funcparam{prompt2} is set, then it is used as a prompt to
-read another password in the same manner as described for
-\funcparam{prompt}. After the second password is read, the two
-passwords are compared, and an error is returned if they are not
-identical.
-
-Echoing is turned off when the password is read.
-
-If there is an error in reading or verifying the password, an error code
-is returned; else zero is returned.
-
-\begin{funcdecl}{krb5_lock_file}{krb5_error_code}{\funcvoid}
-\funcarg{FILE *}{filep}
-\funcarg{char *}{pathname}
-\funcarg{int}{mode}
-\end{funcdecl}
-
-Attempts to lock the file in the given \funcparam{mode}; returns 0 for a
-successful lock, or an error code otherwise.
-
-The caller should arrange that both \funcparam{filep} and
-\funcparam{pathname} refer to the same
-file. The implementation may use whichever is more convenient.
-
-Modes are given in {\tt <krb5/libos.h>}
-
-
-\begin{funcdecl}{krb5_unlock_file}{krb5_error_code}{\funcvoid}
-\funcarg{FILE *}{filep}
-\funcarg{char *}{pathname}
-\end{funcdecl}
-
-Attempts to (completely) unlock the file. Returns 0 if successful,
-or an error code otherwise.
-
-The caller should arrange that both \funcparam{filep} and
-\funcparam{pathname} refer to the same file. The implementation may
-use whichever is more convenient.
-
-\begin{funcdecl}{krb5_timeofday}{krb5_error_code}{\funcout}
-\funcarg{krb5_int32 *}{timeret}
-\end{funcdecl}
-
-Retrieves the system time of day, in seconds since the local system's
-epoch.
-[The ASN.1 encoding routines must convert this to the standard ASN.1
-encoding as needed]
-
-\begin{funcdecl}{krb5_us_timeofday}{krb5_error_code}{\funcout}
-\funcarg{krb5_int32 *}{seconds}
-\funcarg{krb5_int32 *}{microseconds}
-\end{funcdecl}
-
-Retrieves the system time of day, in seconds since the local system's
-epoch.
-[The ASN.1 encoding routines must convert this to the standard ASN.1
-encoding as needed]
-
-The seconds portion is returned in \funcparam{*seconds}, the
-microseconds portion in \funcparam{*microseconds}.
-
-\begin{funcdecl}{krb5_net_read}{int}{\funcin}
-\funcarg{int}{fd}
-\funcout
-\funcarg{char *}{buf}
-\funcin
-\funcarg{int}{len}
-\end{funcdecl}
-
-Like read(2), but guarantees that it reads as much as was requested
-or returns -1 and sets errno.
-
-(make sure your sender will send all the stuff you are looking for!)
-Only useful on stream sockets and pipes.
-
-\begin{funcdecl}{krb5_net_write}{int}{\funcin}
-\funcarg{int}{fd}
-\funcarg{const char *}{buf}
-\funcarg{int}{len}
-\end{funcdecl}
-
-Like write(2), but guarantees that it writes as much as was requested
-or returns -1 and sets errno.
-
-Only useful on stream sockets and pipes.
-
-\begin{funcdecl}{krb5_os_localaddr}{krb5_error_code}{\funcout}
-\funcarg{krb5_address ***}{addr}
-\end{funcdecl}
-
-Return all the protocol addresses of this host.
-
-Compile-time configuration flags will indicate which protocol family
-addresses might be returned.
-\funcparam{*addr} is filled in to point to an array of address pointers,
-terminated by a null pointer. All the storage pointed to is allocated
-and should be freed by the caller with \funcname{krb5_free_address}
-when no longer needed.
-
-
-\begin{funcdecl}{krb5_sendto_kdc}{krb5_error_code}{\funcin}
-\funcarg{krb5_data *}{send}
-\funcarg{krb5_data *}{realm}
-\funcout
-\funcarg{krb5_data *}{receive}
-\end{funcdecl}
-
-Send the message \funcparam{send} to a KDC for realm \funcparam{realm} and
-return the response (if any) in \funcparam{receive}.
-
-If the message is sent and a response is received, 0 is returned,
-otherwise an error code is returned.
-
-The storage for \funcparam{receive} is allocated and should be freed by
-the caller when finished.
-
-\begin{funcdecl}{krb5_get_krbhst}{krb5_error_code}{\funcin}
-\funcarg{krb5_data *}{realm}
-\funcout
-\funcarg{char ***}{hostlist}
-\end{funcdecl}
-
-Figures out the Kerberos server names for the given \funcparam{realm},
-filling in
-\funcparam{hostlist} with a
-pointer to an argv[] style list of names, terminated with a null
-pointer.
-
-If \funcparam{realm} is unknown, the filled-in pointer is set to NULL.
-
-The pointer array and strings pointed to are all in allocated storage,
-and should be freed by the caller when finished.
-
-Returns system errors.
-
-\begin{funcdecl}{krb5_free_krbhst}{krb5_error_code}{\funcin}
-\funcarg{char **}{hostlist}
-\end{funcdecl}
-
-Frees the storage taken by a host list returned by \funcname{krb5_get_krbhst}.
-
-\begin{funcdecl}{krb5_aname_to_localname}{krb5_error_code}{\funcin}
-\funcarg{krb5_principal}{aname}
-\funcarg{int}{lnsize}
-\funcout
-\funcarg{char *}{lname}
-\end{funcdecl}
-
-Converts a principal name \funcparam{aname} to a local name suitable for use by
-programs wishing a translation to an environment-specific name (e.g.
-user account name).
-
-\funcparam{lnsize} specifies the maximum length name that is to be filled into
-\funcparam{lname}.
-The translation will be null terminated in all non-error returns.
-
-Returns system errors.
-
-\begin{funcdecl}{krb5_get_default_realm}{krb5_error_code}{\funcin}
-\funcarg{int}{lnsize}
-\funcout
-\funcarg{char *}{lrealm}
-\end{funcdecl}
-
-Retrieves the default realm to be used if no user-specified realm is
-available (e.g. to interpret a user-typed principal name with the
-realm omitted for convenience).
-
-\funcparam{lnsize} specifies the maximum length name that is to be filled into
-\funcparam{lrealm}.
-
-Returns system errors.
-
-\begin{funcdecl}{krb5_get_host_realm}{krb5_error_code}{\funcin}
-\funcarg{char *}{host}
-\funcout
-\funcarg{char ***}{realmlist}
-\end{funcdecl}
-
-Figures out the Kerberos realm names for \funcparam{host}, filling in
-\funcparam{realmlist} with a
-pointer to an argv[] style list of names, terminated with a null pointer.
-
-If \funcparam{host} is NULL, the local host's realms are determined.
-
-If there are no known realms for the host, the filled-in pointer is set
-to NULL.
-
-The pointer array and strings pointed to are all in allocated storage,
-and should be freed by the caller when finished.
-
-Returns system errors.
-
-\begin{funcdecl}{krb5_free_host_realm}{krb5_error_code}{\funcin}
-\funcarg{char **}{realmlist}
-\end{funcdecl}
-
-Frees the storage taken by a \funcparam{realmlist} returned by
-\funcname{krb5_get_local_realm}.
-
-\begin{funcdecl}{krb5_kuserok}{krb5_boolean}{\funcin}
-\funcarg{krb5_principal}{principal}
-\funcarg{const char *}{luser}
-\end{funcdecl}
-
-Given a Kerberos principal \funcparam{principal}, and a local username
-\funcparam{luser},
-determine whether user is authorized to login to the account \funcparam{luser}.
-Returns TRUE if authorized, FALSE if not authorized.
-
-\begin{funcdecl}{krb5_random_confounder}{krb5_error_code}{\funcin}
-\funcarg{int}{size}
-\funcout
-\funcarg{krb5_pointer}{fillin}
-\end{funcdecl}
-
-Given a length and a pointer, fills in the area pointed to by
-\funcparam{fillin} with \funcparam{size} random octets suitable for use
-in a confounder.
+++ /dev/null
-\documentstyle[newcen,fixunder,functions,changebar,twoside,fancyheadings]{article}
-\setlength{\oddsidemargin}{0in}
-\setlength{\evensidemargin}{1.00in}
-\setlength{\marginparsep}{0.05in}
-\setlength{\marginparwidth}{1.25in}
-\setlength{\textwidth}{5.5in}
-\setlength{\topmargin}{-.5in}
-\setlength{\textheight}{9in}
-\setlength{\parskip}{.1in}
-\setlength{\parindent}{2em}
-\setlength{\footrulewidth}{0.4pt}
-\setlength{\plainfootrulewidth}{0.4pt}
-\setlength{\plainheadrulewidth}{0.4pt}
-\makeindex
-\newif\ifdraft
-\drafttrue
-%
-% Far, far too inconvenient... it's still very draft-like anyway....
-% [tytso:19900921.0018EDT]
-%
-%\typein{Draft flag? (type \noexpand\draftfalse<CR> if not draft...)}
-\ifdraft
-\pagestyle{fancyplain}
-\addtolength{\headwidth}{\marginparsep}
-\addtolength{\headwidth}{\marginparwidth}
-\makeatletter
-\renewcommand{\sectionmark}[1]{\markboth {\uppercase{\ifnum \c@secnumdepth >\z@
- \thesection\hskip 1em\relax \fi #1}}{}}%
-\renewcommand{\subsectionmark}[1]{\markright {\ifnum \c@secnumdepth >\@ne
- \thesubsection\hskip 1em\relax \fi #1}}
-\makeatother
-\lhead[\thepage]{\fancyplain{}{\sl\rightmark}}
-\rhead[\fancyplain{}{\sl\rightmark}]{\thepage}
-\lfoot[]{{\bf DRAFT---DO NOT REDISTRIBUTE}}
-\rfoot[{\bf DRAFT---DO NOT REDISTRIBUTE}]{}
-\cfoot{\thepage}
-\else\pagestyle{headings}\fi
-\begin{document}
-\thispagestyle{empty}
-\begin{center}
-{\Huge Kerberos V5 application programming library}
-\ifdraft \\ {\Large DRAFT---\today}\fi
-\end{center}
-\section{libkrb5.a functions}
-This section describes the functions provided in the \libname{libkrb5.a}
-library. The library is built from several pieces, mostly for convenience in
-programming, maintenance, and porting.
-
-\ifdraft\sloppy\fi
-
-\subsection{Main functions}
-\input{krb5.tex}
-
-\subsection{Credentials cache functions}
-\input{ccache.tex}
-
-\subsection{Replay cache functions}
-\input{rcache.tex}
-
-\subsection{Key table functions}
-\input{keytab.tex}
-
-\section{Operating-system specific functions}
-\input{libos.tex}
-
-\section{Principal database functions}
-
-\input{kdb.tex}
-
-\section{Encryption system interface}
-\input{encrypt.tex}
-
-\section{Checksum interface}
-\input{cksum.tex}
-
-\section{CRC-32 checksum functions}
-\input{crc-32.tex}
-
-\appendix
-\cleardoublepage
-\input{\jobname.ind}
-\end{document}
+++ /dev/null
-The replay cache functions deal with verifying that AP_REQ's do not
-contain duplicate authenticators; the storage must be non-volatile for
-the site-determined validity period of authenticators.
-
-Each replay cache has a string ``name'' associated with it. The use of
-this name is dependent on the underlying caching strategy (for
-file-based things, it would be a cache file name). The
-caching strategy should use non-volatile storage so that replay
-integrity can be maintained across system failures.
-
-\subsubsection{Per-type functions}
-The following entry points must be implemented for each type of
-credentials cache.
-
-\begin{funcdecl}{krb5_rc_initialize}{krb5_error_code}{\funcin}
-\funcarg{krb5_rcache}{id}
-\funcarg{krb5_deltat}{auth_lifespan}
-\end{funcdecl}
-
-Creates/refreshes the replay cache identified by \funcparam{id} and sets its
-authenticator lifespan to \funcparam{auth_lifespan}. If the
-replay cache already exists, its contents are destroyed.
-
-Errors: permission errors, system errors
-
-\begin{funcdecl}{krb5_rc_recover}{krb5_error_code}{\funcin}
-\funcarg{krb5_rcache}{id}
-\end{funcdecl}
-Attempts to recover the replay cache \funcparam{id}, (presumably after a
-system crash or server restart).
-
-Errors: error indicating that no cache was found to recover
-
-\begin{funcdecl}{krb5_rc_destroy}{krb5_error_code}{\funcin}
-\funcarg{krb5_rcache}{id}
-\end{funcdecl}
-
-Destroys the replay cache \funcparam{id}.
-Requires that \funcparam{id} identifies a valid replay cache.
-
-Errors: permission errors.
-
-\begin{funcdecl}{krb5_rc_close}{krb5_error_code}{\funcin}
-\funcarg{krb5_rcache}{id}
-\end{funcdecl}
-
-Closes the replay cache \funcparam{id}, invalidates \funcparam{id},
-and releases any other resources acquired during use of the replay cache.
-Requires that \funcparam{id} identifies a valid replay cache.
-
-Errors: permission errors
-
-\begin{funcdecl}{krb5_rc_store}{krb5_error_code}{\funcin}
-\funcarg{krb5_rcache}{id}
-\funcarg{krb5_tkt_authent *}{tkt_auth}
-\end{funcdecl}
-Stores \funcparam{tkt_auth} in the replay cache \funcparam{id}.
-Requires that \funcparam{id} identifies a valid replay cache.
-
-Returns KRB5KRB_AP_ERR_REPEAT if \funcparam{tkt_auth} is already in the
-cache. May also return permission errors, storage failure errors.
-
-\begin{funcdecl}{krb5_rc_expunge}{krb5_error_code}{\funcin}
-\funcarg{krb5_rcache}{id}
-\end{funcdecl}
-Removes all expired replay information (i.e. those entries which are
-older than then authenticator lifespan of the cache) from the cache
-\funcparam{id}. Requires that \funcparam{id} identifies a valid replay
-cache.
-
-Errors: permission errors.
-
-\begin{funcdecl}{krb5_rc_get_lifespan}{krb5_error_code}{\funcin}
-\funcarg{krb5_rcache}{id}
-\funcout
-\funcarg{krb5_deltat *}{auth_lifespan}
-\end{funcdecl}
-Fills in \funcparam{auth_lifespan} with the lifespan of
-the cache \funcparam{id}.
-Requires that \funcparam{id} identifies a valid replay cache.
-
-\begin{funcdecl}{krb5_rc_resolve}{krb5_error_code}{\funcinout}
-\funcarg{krb5_rcache}{id}
-\funcin
-\funcarg{char *}{name}
-\end{funcdecl}
-
-Initializes private data attached to \funcparam{id}. This function MUST
-be called before the other per-replay cache functions.
-
-Requires that \funcparam{id} points to allocated space, with an
-initialized \funcparam{id{\ptsto}ops} field.
-
-Returns: allocation errors.
-
-
-\begin{funcdecl}{krb5_rc_get_name}{char *}{\funcin}
-\funcarg{krb5_rcache}{id}
-\end{funcdecl}
-
-Returns the name (excluding the type) of the rcache \funcparam{id}.
-Requires that \funcparam{id} identifies a valid replay cache.
-
-\subsubsection{Glue functions}
-The following functions are implemented in the base library and serve to
-glue together the various types of replay caches.
-
-\begin{funcdecl}{krb5_rc_resolve_full}{krb5_error_code}{\funcinout}
-\funcarg{krb5_rcache *}{id}
-\funcin
-\funcarg{char *}{string_name}
-\end{funcdecl}
-
-\funcparam{id} is filled in to identify a replay cache which
-corresponds to the name in \funcparam{string_name}. The cache is not opened.
-Requires that \funcparam{string_name} be of the form ``type:residual''
-and that ``type'' is a type known to the library.
-
-Errors: error if cannot resolve name.
-
-\begin{funcdecl}{krb5_rc_register_type}{krb5_error_code}{\funcin}
-\funcarg{krb5_rc_ops *}{ops}
-\end{funcdecl}
-Adds a new replay cache type implemented and identified by
-\funcparam{ops} to the set recognized by
-\funcname{krb5_rc_resolve}. Requires that a ticket cache type named
-\funcparam{ops{\ptsto}prefix} is not yet known.
-
-
-\begin{funcdecl}{krb5_rc_default_name}{char *}{\funcvoid}
-\end{funcdecl}
-Returns the name of the default replay cache; this may be equivalent to
-\funcnamenoparens{getenv}({\tt "KRB5RCACHE"}) with an appropriate fallback.
-
-\begin{funcdecl}{krb5_rc_default_type}{char *}{\funcvoid}
-\end{funcdecl}
-
-Returns the type of the default replay cache.
-
-\begin{funcdecl}{krb5_rc_default}{krb5_error_code}{\funcinout}
-\funcarg{krb5_rcache *}{id}
-\end{funcdecl}
-Equivalent to \funcnamenoparens{krb5_rc_resolve_full}(\funcparam{id},
-\funcnamenoparens{strcat}(\funcnamenoparens{strcat}(\funcname{krb5_rc_default_type},``:''),
-\funcname{krb5_rc_default_name})) (except of course you can't do the
-strcat's with the return values\ldots).
+++ /dev/null
-.SUFFIXES: .tex .dvi .ps
-
-STYLES=changebar.sty fixunder.sty functions.sty
-LIBTEX= library.tex krb5.tex ccache.tex rcache.tex keytab.tex libos.tex \
- kdb.tex encrypt.tex cksum.tex crc-32.tex library.ind
-
-DESTEX= libdes.tex
-
-all: library.ps libdes.ps
-
-
-libdes.ps: libdes.dvi
-libdes.tex: $(DESTEX) $(STYLES)
-
-library.ps: library.dvi
-
-# hard to capture two-pass semantics in Makefiles...
-# library.ind: library.dvi
-library.ind:
- index library.idx
-
-library.tex: $(LIBTEX) $(STYLES)
-
-.tex.dvi:
- latex $*
-
-
-.dvi.ps:
- dvi2ps -r $*.dvi >$*.ps
-
+++ /dev/null
-The credentials cache functions (some of which are macros which call to
-specific types of credentials caches) deal with storing credentials
-(tickets, session keys, and other identifying information) in a
-semi-permanent store for later use by different programs.
-
-\subsubsection{Per-type functions}
-The following entry points must be implemented for each type of
-credentials cache; however, applications are not expected to have a need
-to call either \funcname{krb5_cc_resolve_internal} or
-\funcname{krb5_cc_gennew_internal}.
-
-
-\begin{funcdecl}{krb5_cc_resolve_internal}{krb5_error_code}{\funcout}
-\funcarg{krb5_ccache *}{id}
-\funcin
-\funcarg{char *}{residual}
-\end{funcdecl}
-
-Creates a credentials cache named by \funcparam{residual} (which may be
-interpreted differently by each type of ccache). The cache is not
-opened, but the cache name is held in reserve.
-
-\begin{funcdecl}{krb5_cc_gennew_internal}{krb5_error_code}{\funcout}
-\funcarg{krb5_ccache *}{id}
-\end{funcdecl}
-
-Creates a new credentials cache whose name is guaranteed to be
-unique. The cache is not opened. \funcparam{*id} is
-filled in with a \datatype{krb5_ccache} which may be used in subsequent
-calls to ccache functions.
-
-\begin{funcdecl}{krb5_cc_initialize}{krb5_error_code}{\funcinout}
-\funcarg{krb5_ccache}{id}
-\funcin
-\funcarg{krb5_principal}{primary_principal}
-\end{funcdecl}
-
-Creates/refreshes a credentials cache identified by \funcparam{id} with
-primary principal set to \funcparam{primary_principal}.
-If the credentials cache already exists, its contents are destroyed.
-
-Errors: permission errors, system errors.
-
-Modifies: cache identified by \funcparam{id}.
-
-\begin{funcdecl}{krb5_cc_destroy}{krb5_error_code}{\funcin}
-\funcarg{krb5_ccache}{id}
-\end{funcdecl}
-
-Destroys the credentials cache identified by \funcparam{id}, invalidates
-\funcparam{id}, and releases any other resources acquired during use of
-the credentials cache. Requires that \funcparam{id} identifies a valid
-credentials cache. After return, \funcparam{id} must not be used unless
-it is first reinitialized.
-
-Errors: permission errors.
-
-\begin{funcdecl}{krb5_cc_close}{krb5_error_code}{\funcinout}
-\funcarg{krb5_ccache}{id}
-\end{funcdecl}
-
-Closes the credentials cache \funcparam{id}, invalidates \funcparam{id},
-and releases any other resources acquired during use of the credentials
-cache. Requires that \funcparam{id} identifies a valid credentials
-cache. After return, \funcparam{id} must not be used unless it is first
-reinitialized.
-
-
-\begin{funcdecl}{krb5_cc_store_cred}{krb5_error_code}{\funcin}
-\funcarg{krb5_ccache}{id}
-\funcarg{krb5_credentials *}{creds}
-\end{funcdecl}
-
-Stores \funcparam{creds} in the cache \funcparam{id}, tagged with
-\funcparam{creds{\ptsto}client}.
-Requires that \funcparam{id} identifies a valid credentials cache.
-
-Errors: permission errors, storage failure errors.
-
-\begin{funcdecl}{krb5_cc_retrieve_cred}{krb5_error_code}{\funcin}
-\funcarg{krb5_ccache}{id}
-\funcarg{krb5_flags}{whichfields}
-\funcarg{krb5_credentials *}{mcreds}
-\funcout
-\funcarg{krb5_credentials *}{creds}
-\end{funcdecl}
-
-Searches the cache \funcparam{id} for credentials matching
-\funcparam{mcreds}. The fields which are to be matched are specified by
-set bits in \funcparam{whichfields}, and always include the principal
-name \funcparam{mcreds{\ptsto}server}.
-Requires that \funcparam{id} identifies a valid credentials cache.
-
-If at least one match is found, one of the matching credentials is
-returned in \funcparam{*creds}. XXX free the return creds?
-
-Errors: error code if no matches found.
-
-\begin{funcdecl}{krb5_cc_get_principal}{krb5_error_code}{\funcin}
-\funcarg{krb5_ccache}{id}
-\funcarg{krb5_principal *}{principal}
-\end{funcdecl}
-
-Retrieves the primary principal of the credentials cache (as
-set by the \funcname{krb5_cc_initialize} request)
-The primary principal is filled into \funcparam{*principal}; the caller
-should release this memory by calling \funcname{krb5_free_principal} on
-\funcparam{*principal} when finished.
-
-Requires that \funcparam{id} identifies a valid credentials cache.
-
-\begin{funcdecl}{krb5_cc_start_seq_get}{krb5_error_code}{\funcin}
-\funcarg{krb5_ccache}{id}
-\funcout
-\funcarg{krb5_cc_cursor *}{cursor}
-\end{funcdecl}
-
-Prepares to sequentially read every set of cached credentials.
-Requires that \funcparam{id} identifies a valid credentials cache opened by
-\funcname{krb5_cc_open}.
-\funcparam{cursor} is filled in with a cursor to be used in calls to
-\funcname{krb5_cc_next_cred}.
-
-\begin{funcdecl}{krb5_cc_next_cred}{krb5_error_code}{\funcin}
-\funcarg{krb5_ccache}{id}
-\funcout
-\funcarg{krb5_credentials *}{creds}
-\funcinout
-\funcarg{krb5_cc_cursor *}{cursor}
-\end{funcdecl}
-
-Fetches the next entry from \funcparam{id}, returning its values in
-\funcparam{*creds}, and updates \funcparam{*cursor} for the next request.
-Requires that \funcparam{id} identifies a valid credentials cache and
-\funcparam{*cursor} be a cursor returned by
-\funcname{krb5_cc_start_seq_get} or a subsequent call to
-\funcname{krb5_cc_next_cred}.
-
-Errors: error code if no more cache entries.
-
-\begin{funcdecl}{krb5_cc_end_seq_get}{krb5_error_code}{\funcin}
-\funcarg{krb5_ccache}{id}
-\funcarg{krb5_cc_cursor *}{cursor}
-\end{funcdecl}
-
-Finishes sequential processing mode and invalidates \funcparam{*cursor}.
-\funcparam{*cursor} must never be re-used after this call.
-
-Requires that \funcparam{id} identifies a valid credentials cache and
-\funcparam{*cursor} be a cursor returned by
-\funcname{krb5_cc_start_seq_get} or a subsequent call to
-\funcname{krb5_cc_next_cred}.
-
-Errors: may return error code if \funcparam{*cursor} is invalid.
-
-
-\begin{funcdecl}{krb5_cc_remove_cred}{krb5_error_code}{\funcin}
-\funcarg{krb5_ccache}{id}
-\funcarg{krb5_flags}{which}
-\funcarg{krb5_credentials *}{cred}
-\end{funcdecl}
-
-Removes any credentials from \funcparam{id} which match the principal
-name {cred{\ptsto}server} and the fields in \funcparam{cred} masked by
-\funcparam{which}.
-Requires that \funcparam{id} identifies a valid credentials cache.
-
-Errors: returns error code if nothing matches; returns error code if
-couldn't delete.
-
-\begin{funcdecl}{krb5_cc_set_flags}{krb5_error_code}{\funcin}
-\funcarg{krb5_ccache}{id}
-\funcarg{krb5_flags}{flags}
-\end{funcdecl}
-
-Sets the flags on the cache \funcparam{id} to \funcparam{flags}. Useful
-flags are defined in {\tt <krb5/ccache.h>}.
-
-
-\subsubsection{Glue functions}
-The following functions are implemented in the base library and serve to
-glue together the various types of credentials caches.
-
-
-\begin{funcdecl}{krb5_cc_resolve}{krb5_error_code}{\funcin}
-\funcarg{char *}{string_name}
-\funcout
-\funcarg{krb5_ccache *}{id}
-\end{funcdecl}
-
-Fills in \funcparam{id} with a ccache identifier which corresponds to
-the name in \funcparam{string_name}. The cache is left unopened.
-
-Requires that \funcparam{string_name} be of the form ``type:residual'' and
-``type'' is a type known to the library.
-
-\begin{funcdecl}{krb5_cc_generate_new}{krb5_error_code}{\funcin}
-\funcarg{krb5_cc_ops *}{ops}
-\funcout
-\funcarg{krb5_ccache *}{id}
-\end{funcdecl}
-
-
-Fills in \funcparam{id} with a unique ccache identifier of a type defined by
-\funcparam{ops}. The cache is left unopened.
-
-\begin{funcdecl}{krb5_cc_register}{krb5_error_code}{\funcin}
-\funcarg{krb5_cc_ops *}{ops}
-\funcarg{krb5_boolean}{override}
-\end{funcdecl}
-
-Adds a new cache type identified and implemented by \funcparam{ops} to
-the set recognized by \funcname{krb5_cc_resolve}.
-If \funcparam{override} is FALSE, a ticket cache type named
-\funcparam{ops{\ptsto}prefix} must not be known.
-
-\begin{funcdecl}{krb5_cc_get_name}{char *}{\funcin}
-\funcarg{krb5_ccache}{id}
-\end{funcdecl}
-
-Returns the name of the ccache denoted by \funcparam{id}.
-
-\begin{funcdecl}{krb5_cc_default_name}{char *}{\funcvoid}
-\end{funcdecl}
-
-Returns the name of the default credentials cache; this may be equivalent to
-\funcnamenoparens{getenv}({\tt "KRB5CCACHE"}) with an appropriate fallback.
-
-\begin{funcdecl}{krb5_cc_default}{krb5_error_code}{\funcout}
-\funcarg{krb5_ccache *}{ccache}
-\end{funcdecl}
-
-Equivalent to
-\funcnamenoparens{krb5_cc_resolve}(\funcname{krb5_cc_default_name},
-\funcparam{ccache}).
-
+++ /dev/null
-Kerberos v5 has the ability to use multiple checksum algorithms. Any
-checksum implementation which desires to link with and be usable from the MIT
-Kerberos v5 implementation must implement this interface:
-
-\subsection{Functional interface}
-
-\begin{funcdecl}{sum_func}{krb5_error_code}{\funcin}
-\funcarg{krb5_pointer}{in}
-\funcarg{size_t}{in_length}
-\funcarg{krb5_pointer}{seed}
-\funcarg{size_t}{seed_length}
-\funcout
-\funcarg{krb5_checksum *}{outcksum}
-\end{funcdecl}
-
-This routine computes the desired checksum over \funcparam{in_length} bytes
-at \funcparam{in}. \funcparam{seed_length} bytes of a seed (usually an
-encryption key) are pointed to by \funcparam{seed}. Some checksum
-algorithms may choose to ignore \funcparam{seed}. If
-\funcparam{seed_length} is zero, then there is no seed available.
-The routine places the resulting value into \funcparam{outcksum{\ptsto}contents}.
-
-\funcparam{outcksum{\ptsto}contents} must be set by the caller to point
-to enough storage to contain the checksum; the size necessary is an
-element of the \datatype{krb5_checksum_entry} structure.
-
-\subsection{Other data elements}
-In addition to the above listed function entry point, each checksum algorithm
-should have an entry in \globalname{krb5_cksumarray} and a
-\datatype{krb5_checksum_entry} structure describing the entry points
-and checksum size for the algorithm.
+++ /dev/null
-The \libname{libcrc32.a} library provides an implementation of the
-CRC-32 checksum algorithm which conforms to the interface required by
-the Kerberos library.
-
-\begin{funcdecl}{crc32_sum_func}{static krb5_error_code}{\funcin}
-\funcarg{krb5_pointer}{in}
-\funcarg{size_t}{in_length}
-\funcarg{krb5_pointer}{seed}
-\funcarg{size_t}{seed_length}
-\funcout
-\funcarg{krb5_checksum *}{outcksum}
-\end{funcdecl}
-
-This routine computes a CRC-32 checksum over \funcparam{in_length} bytes
-at \funcparam{in}, and places the resulting value into
-\funcparam{outcksum{\ptsto}contents}. \funcparam{seed} is ignored.
-
-\funcparam{outcksum{\ptsto}contents} must be set by the caller to point
-to at least 4 bytes of storage.
-
+++ /dev/null
-Kerberos v5 has the ability to use multiple encryption systems. Any
-encryption system which desires to link with and be usable from the MIT
-Kerberos v5 implementation must implement at least this interface:
-
-\subsection{Functional interface}
-
-\begin{funcdecl}{encrypt_func}{krb5_error_code}{\funcvoid}
-\funcarg{const krb5_pointer}{in}
-\funcarg{krb5_pointer}{out}
-\funcarg{const size_t}{size}
-\funcarg{krb5_encrypt_block *}{eblock}
-\funcarg{krb5_pointer}{ivec}
-\end{funcdecl}
-Encrypts \funcparam{size} bytes at \funcparam{in}, storing result in
-\funcparam{out}. \funcparam{eblock} points to an encrypt block which
-has been initialized by \funcname{process_key}.
-
-\funcparam{in} must include sufficient space beyond the \funcparam{size}
-bytes of input data to hold pad and redundancy check bytes; the macro
-\funcname{krb5_encrypt_size} can be used to compute this size.
-
-\funcparam{out} must be preallocated by the caller to contain sufficient
-storage to hold the output; the macro \funcname{krb5_encrypt_size} can
-be used to compute this size.
-
-\funcparam{ivec} points to an initial vector/seed to be used in the encryption.
-If null, the cryptosystem may choose an appropriate initialization vector.
-
-Returns errors.
-
-\begin{funcdecl}{decrypt_func}{krb5_error_code}{\funcvoid}
-\funcarg{const krb5_pointer}{in}
-\funcarg{krb5_pointer}{out}
-\funcarg{const size_t}{size}
-\funcarg{krb5_encrypt_block *}{eblock}
-\funcarg{krb5_pointer}{ivec}
-\end{funcdecl}
-Decrypts \funcparam{size} bytes at \funcparam{in}, storing result in
-\funcparam{out}.
-\funcparam{eblock} points to an encrypt block which has been initialized
-by \funcname{process_key}.
-
-\funcparam{size} must be a multiple of the encryption block size.
-
-\funcparam{out} must be preallocated by the caller to contain sufficient
-storage to hold the output; this is guaranteed to be no more than
-the input size.
-
-\funcparam{ivec} points to an initial vector/seed to be used in the decryption.
-If null, the cryptosystem may choose an appropriate ivec.
-
-Returns errors.
-
-\begin{funcdecl}{process_key}{krb5_error_code}{\funcvoid}
-\funcarg{krb5_encrypt_block *}{eblock}
-\funcarg{krb5_keyblock *}{keyblock}
-\end{funcdecl}
-Does any necessary key preprocessing (such as computing key
-schedules for DES).
-\funcparam{eblock{\ptsto}crypto_entry} must be set by the caller; the
-other elements of \funcparam{eblock} are to be assigned by this function.
-[In particular, \funcparam{eblock{\ptsto}key} must be set by this
-function if the key is needed in raw form by the encryption routine.]
-
-The caller may not move or reallocate \funcparam{keyblock} before calling
-\funcname{finish_key} on \funcparam{eblock}.
-
-Returns errors.
-
-\begin{funcdecl}{finish_key}{krb5_error_code}{\funcvoid}
-\funcarg{krb5_encrypt_block *}{eblock}
-\end{funcdecl}
-Does any necessary clean-up on \funcparam{eblock} (such as releasing
-resources held by \funcparam{eblock{\ptsto}priv}.
-
-Returns errors.
-
-\begin{funcdecl}{string_to_key}{krb5_error_code}{\funcvoid}
-\funcarg{krb5_keytype}{keytype}
-\funcarg{krb5_keyblock *}{keyblock}
-\funcarg{krb5_data *}{data}
-\funcarg{krb5_principal}{princ}
-\end{funcdecl}
-Converts the string pointed to by \funcparam{data} into an encryption key
-of type \funcparam{keytype}. \funcparam{*keyblock} is filled in with
-the key info; in particular, \funcparam{keyblock{\ptsto}contents} is to
-be set to allocated storage. It is the responsibility of the caller to
-release this storage when the generated key no longer needed.
-
-The routine may use \funcparam{princ} to seed or alter the conversion
-algorithm.
-
-If the particular function called does not know how to make a
-key of type \funcparam{keytype}, an error may be returned.
-
-Returns errors.
-
-\begin{funcdecl}{init_random_key}{krb5_error_code}{\funcvoid}
-\funcarg{krb5_keyblock *}{seedblock}
-\funcarg{krb5_pointer *}{seed}
-\end{funcdecl}
-Initialize the random key generator using the encryption key
-\funcparam{seedblock} and allocating private sequence information, filling
-in \funcparam{*seed} with the address of such information.
-\funcparam{*seed} is to be passed to \funcname{random_key} to provide
-sequence information.
-
-\begin{funcdecl}{finish_random_key}{krb5_error_code}{\funcvoid}
-\funcarg{krb5_pointer}{seed}
-\end{funcdecl}
-Free any resources held by \funcparam{seed} and assigned by
-\funcname{init_random_key}.
-
-\begin{funcdecl}{random_key}{krb5_error_code}{\funcvoid}
-\funcarg{krb5_pointer}{seed}
-\funcarg{krb5_keyblock **}{keyblock}
-\end{funcdecl}
-Generate a random encryption key, allocating storage for it and
-filling in the keyblock address in \funcparam{*keyblock}.
-When the caller has finished using the keyblock, he should call
-\funcname{krb5_free_keyblock} to release its storage.
-
-\subsection{Other data elements}
-In addition to the above listed function entry points, each encryption
-system should have an entry in \globalname{krb5_csarray} and a
-\datatype{krb5_cryptosystem_entry} structure describing the entry points
-and key and padding sizes for the encryption system.
+++ /dev/null
-% fixunder.sty, 31 May 1990, John T. Kohl
-%
-% The contents of this file are in the public domain.
-%
-%
-% play games with _ to make it active and to provide a reasonable _
-% character (from \tt in most cases), and a discretionary word-break point.
-
-%
-% Some \makeunder... macros for convenience in setting catcodes.
-%
-\def\makeunderactive{\catcode`\_=\active\relax}
-\def\makeunderother{\catcode`\_=12\relax}
-\def\makeunderletter{\catcode`\_=11\relax}
-\def\makeundernormal{\catcode`\_=8\relax}
-\makeunderother
-\def\cctwlunder{_}
-
-%
-% The hair here is to allow things like \index to work reasonably with
-% the new definition of underscore when the argument to index is part of
-% a macro replacement and as such gets tokenized before \index is
-% evaluated.
-% [in the normal case at top-level, \index{foo_bar} works since \index
-% does some hair to make _ into a reasonable character code, and \index
-% does NOT use a macro expansion. If you have something like
-% \def\foo#1#2{\index{#1} bar #2}
-% then \foo{baz_quux}{frobnitz} will result in baz_quux getting
-% tokenized BEFORE \foo is expanded, so that the catcode hair in \index
-% is to no avail.]
-%
-% \underrealfalse declares that you want to replace with the \tt _;
-% \underrealtrue declares that you want to replace with \char95 (ASCII _).
-%
-% for things like \index which write things out to files, set
-% \underrealfalse before evaluating the \index macro, and what actually
-% gets written to the file is an _, rather than something like
-% {\leavemode \kern... } (the typical definition of \_).
-%
-% the above example would then be
-% \def\foo#1#2{\underrealfalse\index{#1}\underrealtrue bar #2}
-%
-
-\newif\ifunderreal
-\underrealfalse
-\makeunderactive
-\def_{\ifunderreal\cctwlunder\else\leavevmode {\tt \cctwlunder}\discretionary{}{}{}\fi}
-\let\_=_
+++ /dev/null
-%
-% definitions related to function declarations/displays
-%
-\ifx\undefined\@psfonts
-\def\argfont{\tt}
-\else
-\font\argfont = c-bol
-\hyphenchar\argfont = -1
-\fi
-\let\funcfont=\bf
-\newcount\argc@ount
-%\setlength{\marginparsep}{0.05in}
-%\setlength{\marginparwidth}{1.45in}
-%
-% This function fixes up the function name to be displayed in the
-% margin so that the krb5_, if any, is stripped.
-%
-% Note: this is a hack; what's really happening is that name beginning with
-% krb5 will have its first five characters stripped from it.
-% This means that 'Krb5abc' will get rewritten to be 'bc'.
-% Unfortunately, we can't do better because of the underscore
-% hacks that are going on elsewhere.
-%
-% WARNING: This is ugly; don't look at it too soon after lunch!
-% [tytso:19900920.2231EDT]
-\newif\if@krbfunc
-\def\endkrb{}
-\def\fix@parname#1{\expandafter\parse@krb#1\endkrb%
-\endkrb\endkrb\endkrb\endkrb}% In case the argument is less
-% than five letters, we don't want to
-% lose on the argument parsing.
-\def\parse@krb#1#2#3#4#5#6\endkrb{\@krbfuncfalse%
-\if#1k\if#2r\if#3b\if#45\@krbfunctrue\fi\fi\fi\fi%
-\if@krbfunc#6\else#1#2#3#4#5#6\fi}
-%
-% funcdecl is used as \begin{funcdecl}{funcname}{return type}{firstline}
-%
-% see fixunder.sty for comments on why the \underrealtrue & \underrealfalse
-% stuff is here.
-\newenvironment{funcdecl}[3]{\underrealtrue\index{#1}\underrealfalse%
-\medbreak
-\gdef\funcn@me{#1}
-\argc@ount=0\noindent\marginpar[{{\sloppy \fix@parname{\funcn@me}}}]%
-{{\sloppy \hfill\fix@parname{\funcn@me}}}%
-\vbox\bgroup\begin{minipage}[t]{\textwidth}\begin{tabbing}
-#2 \\
-{\bf #1}(\= \+ #3%
-}{)
-\end{tabbing}\vfil\end{minipage}\egroup\par\nopagebreak
-}
-\newcommand{\docomm@}{\ifnum\argc@ount >0, \\\fi}
-\newcommand{\funcvoid}{\argc@ount=0}
-\newcommand{\funcin}{\docomm@\argc@ount=0{\sl /* IN */}\\}
-\newcommand{\funcinout}{\docomm@\argc@ount=0{\sl /* INOUT */}\\}
-\newcommand{\funcout}{\docomm@\argc@ount=0{\sl /* OUT */}\\}
-\newcommand{\funcarg}[2]{\docomm@#1 {\argfont #2}\advance\argc@ount by1}
-\newcommand{\funcparam}[1]{{\argfont #1}}
-\newcommand{\funcfuncarg}[2]{\docomm@#1 {\argfont #2}(\= \+ \argc@ount=0}
-\newcommand{\funcendfuncarg}{), \- \\ \argc@ount=0}
-\newcommand{\libname}[1]{{\argfont #1}}
-\newcommand{\globalname}[1]{{\argfont #1}}
-\newcommand{\ptsto}{->\discretionary{}{}{}}
-\newcommand{\datatype}[1]{{\bf #1}}
-\newcommand{\filename}[1]{{\sl #1\/}}
-
-\newcommand{\funcname}[1]{\underrealtrue\index{#1}\underrealfalse{\funcfont #1}()}
-\newcommand{\funcnamenoparens}[1]{\underrealtrue\index{#1}\underrealfalse{\funcfont #1}}
+++ /dev/null
-\documentstyle[newcen,fixunder,functions,changebar,twoside,fancyheadings]{article}
-\setlength{\oddsidemargin}{0in}
-\setlength{\evensidemargin}{1.00in}
-\setlength{\marginparsep}{0.05in}
-\setlength{\marginparwidth}{1.25in}
-\setlength{\textwidth}{5.5in}
-\setlength{\topmargin}{-.5in}
-\setlength{\textheight}{9in}
-\setlength{\parskip}{.1in}
-\setlength{\parindent}{2em}
-\setlength{\footrulewidth}{0.4pt}
-\setlength{\plainfootrulewidth}{0.4pt}
-\setlength{\plainheadrulewidth}{0.4pt}
-\makeindex
-\newif\ifdraft
-\drafttrue
-%
-% Far, far too inconvenient... it's still very draft-like anyway....
-% [tytso:19900921.0018EDT]
-%
-%\typein{Draft flag? (type \noexpand\draftfalse<CR> if not draft...)}
-\ifdraft
-\pagestyle{fancyplain}
-\addtolength{\headwidth}{\marginparsep}
-\addtolength{\headwidth}{\marginparwidth}
-\makeatletter
-\renewcommand{\sectionmark}[1]{\markboth {\uppercase{\ifnum \c@secnumdepth >\z@
- \thesection\hskip 1em\relax \fi #1}}{}}%
-\renewcommand{\subsectionmark}[1]{\markright {\ifnum \c@secnumdepth >\@ne
- \thesubsection\hskip 1em\relax \fi #1}}
-\makeatother
-\lhead[\thepage]{\fancyplain{}{\sl\rightmark}}
-\rhead[\fancyplain{}{\sl\rightmark}]{\thepage}
-\lfoot[]{{\bf DRAFT---DO NOT REDISTRIBUTE}}
-\rfoot[{\bf DRAFT---DO NOT REDISTRIBUTE}]{}
-\cfoot{\thepage}
-\else\pagestyle{headings}\fi
-\begin{document}
-\thispagestyle{empty}
-\begin{center}
-{\Huge Kerberos V5 application programming library}
-\ifdraft \\ {\Large DRAFT---\today}\fi
-\end{center}
-\section{libkrb5.a functions}
-This section describes the functions provided in the \libname{libkrb5.a}
-library. The library is built from several pieces, mostly for convenience in
-programming, maintenance, and porting.
-
-\ifdraft\sloppy\fi
-
-\subsection{Main functions}
-\input{krb5.tex}
-
-\subsection{Credentials cache functions}
-\input{ccache.tex}
-
-\subsection{Replay cache functions}
-\input{rcache.tex}
-
-\subsection{Key table functions}
-\input{keytab.tex}
-
-\section{Operating-system specific functions}
-\input{libos.tex}
-
-\section{Principal database functions}
-
-\input{kdb.tex}
-
-\section{Encryption system interface}
-\input{encrypt.tex}
-
-\section{Checksum interface}
-\input{cksum.tex}
-
-\section{CRC-32 checksum functions}
-\input{crc-32.tex}
-
-\appendix
-\cleardoublepage
-\input{\jobname.ind}
-\end{document}
+++ /dev/null
-The \libname{libkdb.a} library provides a principal database interface
-to be used by the Key Distribution center and other database
-manipulation tools.
-
-
-\begin{funcdecl}{krb5_db_set_name}{krb5_error_code}{\funcin}
-\funcarg{char *}{name}
-\end{funcdecl}
-
-Set the name of the database to \funcparam{name}. If it doesn't exist,
-an error code is returned.
-
-Must be called before \funcname{krb5_db_init} or after
-\funcname{krb5_db_fini}; must not be called while db functions are active.
-
-\begin{funcdecl}{krb5_db_set_nonblocking}{krb5_error_code}{\funcin}
-\funcarg{krb5_boolean}{newmode}
-\funcout
-\funcarg{krb5_boolean *}{oldmode}
-\end{funcdecl}
-
-Changes the locking mode of the database functions, returning the previous
-mode in \funcparam{*oldmode}.
-
-If \funcparam{newmode} is TRUE, then the database is put into
-non-blocking mode, which may result in ``database busy'' error codes from
-the get, put, and iterate routines.
-
-If \funcparam{newmode} is FALSE, then the database is put into blocking mode,
-which may result in delays from the get, put and iterate routines.
-
-The default database mode is blocking mode.
-
-\begin{funcdecl}{krb5_db_init}{krb5_error_code}{\funcvoid}
-\end{funcdecl}
-
-Called before using \funcname{krb5_db_get_principal},
-\funcname{krb5_db_put_principal}, \funcname{krb5_db_iterate}, and
-\funcname{krb5_db_set_nonblocking}.
-
-Does any required initialization.
-
-Errors: init errors, system errors.
-
-\begin{funcdecl}{krb5_db_fini}{krb5_error_code}{\funcvoid}
-\end{funcdecl}
-
-Called after all database operations are complete, to perform any required
-clean-up.
-
-Errors: sysytem errors.
-
-
-\begin{funcdecl}{krb5_db_get_age}{krb5_error_code}{\funcin}
-\funcarg{char *}{db_name}
-\funcout
-\funcarg{time_t *}{age}
-\end{funcdecl}
-
-Retrieves the age of the database \funcname{db_name} (or the current
-default database if \funcname{db_name} is NULL).
-
-\funcparam{*age} is filled in in local system time units, and represents
-the last modification time of the database.
-
-Errors: system errors.
-
-
-\begin{funcdecl}{krb5_db_create}{krb5_error_code}{\funcin}
-\funcarg{char *}{db_name}
-\end{funcdecl}
-
-Creates a new database named \funcname{db_name}. Will not create a
-database by that name if it already exists. The database must be
-populated by the caller by using \funcname{krb5_db_put_principal}.
-
-Errors: db exists, system errors.
-
-\begin{funcdecl}{krb5_db_rename}{krb5_error_code}{\funcin}
-\funcarg{char *}{source}
-\funcarg{char *}{dest}
-\end{funcdecl}
-Renames the database \funcarg{source} to \funcarg{dest}
-
-Any database named \funcarg{dest} is destroyed.
-
-Errors: system errors.
-
-\begin{funcdecl}{krb5_db_get_principal}{krb5_error_code}{\funcin}
-\funcarg{krb5_principal}{searchfor}
-\funcout
-\funcarg{krb5_db_entry *}{entries}
-\funcinout
-\funcarg{int *}{nentries}
-\funcout
-\funcarg{krb5_boolean *}{more}
-\end{funcdecl}
-
-Retrieves the principal records named by \funcparam{searchfor}.
-
-\funcparam{entries} must point to an array of \funcparam{*nentries}
-krb5_db_entry structures.
-At most \funcparam{*nentries} structures are filled in, and
-\funcparam{*nentries} is modified to reflect the number actually returned.
-
-\funcparam{*nentries} must be at least one (1) when this function is called.
-
-\funcparam{*more} is set to TRUE if there are more records that wouldn't fit
-in the available space, and FALSE otherwise.
-
-The principal structures filled in have pointers to allocated storage;
-\funcname{krb5_db_free_principal} should be called with
-\funcparam{entries} and \funcparam{*nentries}
-in order to free this storage when no longer needed.
-
-
-\begin{funcdecl}{krb5_db_free_principal}{void}{\funcin}
-\funcarg{krb5_db_entry *}{entries}
-\funcarg{int}{nentries}
-\end{funcdecl}
-
-Frees allocated storage held by \funcparam{entries} as filled in by
-\funcname{krb5_db_get_principal}.
-
-
-\begin{funcdecl}{krb5_db_put_principal}{krb5_error_code}{\funcin}
-\funcarg{krb5_db_entry *}{entries}
-\funcarg{int *}{nentries}
-\end{funcdecl}
-
-Stores the \funcparam{*nentries} principal structures pointed to by
-\funcparam{entries} in the database.
-
-\funcparam{*nentries} is updated upon return to reflect the number of records
-acutally stored; the first \funcparam{*nentries} records will have been
-stored in the database.
-
-Returns error code if not all entries were stored.
-
-\begin{funcdecl}{krb5_db_iterate}{krb5_error_code}{\funcin}
-\funcfuncarg{krb5_error_code}{(*func)}
-\funcarg{krb5_pointer}{}
-\funcarg{krb5_db_entry *}{}
-\funcendfuncarg
-\funcarg{krb5_pointer}{iterate_arg}
-\end{funcdecl}
-
-Iterates over the database, fetching every entry in an unspecified order
-and calling \funcparam{(*func)}(\funcparam{iterate_arg},
-{\sl principal\/}) where {\sl principal\/} points to a record from the
-database.
-
-If \funcparam{(*func)}() ever returns an error code, the iteration is
-aborted and that error code is returned by this function.
-
-\begin{funcdecl}{krb5_db_store_mkey}{krb5_error_code}{\funcin}
-\funcarg{char *}{keyfile}
-\funcarg{krb5_principal}{mname}
-\funcarg{krb5_keyblock *}{key}
-\end{funcdecl}
-
-Put the KDC database master key into the file \funcparam{keyfile}. If
-\funcparam{keyfile} is NULL, then a default file name derived from the
-principal name \funcparam{mname} is used.
-
-\begin{funcdecl}{krb5_db_fetch_mkey}{krb5_error_code}{\funcin}
-\funcarg{krb5_principal}{mname}
-\funcarg{krb5_encrypt_block *}{eblock}
-\funcarg{krb5_boolean}{fromkeyboard}
-\funcarg{krb5_boolean}{twice}
-\funcinout
-\funcarg{krb5_keyblock *}{key}
-\end{funcdecl}
-
-Get the KDC database master key from somewhere, filling it into
-\funcparam{*key}.
-\funcparam{key{\ptsto}keytype} should be set to the desired key type.
-If \funcparam{fromkeyboard} is TRUE, then the master key is read as a password
-from the user's terminal. In this case,
-\funcparam{eblock} should point to a block with an appropriate
-\funcname{string_to_key} function.
-If \funcparam{twice} is TRUE, the password is read twice for verification.
-
-If \funcparam{fromkeyboard} is false, then the key is read from
-a file whose name is derived from the principal name \funcparam{mname}.
-
-\funcparam{mname} is the name of the key sought; this is often used by
-\funcname{string_to_key} to aid in conversion of the password to a key.
-
-\begin{funcdecl}{krb5_kdb_encrypt_key}{krb5_error_code}{\funcin}
-\funcarg{krb5_encrypt_block *}{eblock}
-\funcarg{krb5_keyblock *}{in}
-\funcinout
-\funcarg{krb5_keyblock *}{out}
-\end{funcdecl}
-
-Encrypt a key for storage in the database. \funcparam{eblock} is used
-to encrypt the key in \funcparam{in} into \funcparam{out}; the storage
-pointed to by \funcparam{*out} is allocated before use and should be
-freed when the caller is finished with it.
-
-\begin{funcdecl}{krb5_kdb_decrypt_key}{krb5_error_code}{\funcin}
-\funcarg{krb5_encrypt_block *}{eblock}
-\funcarg{krb5_keyblock *}{in}
-\funcinout
-\funcarg{krb5_keyblock *}{out}
-\end{funcdecl}
-
-Decrypt a key from storage in the database. \funcparam{eblock} is used
-to decrypt the key in \funcparam{in} into \funcparam{out}; the storage
-pointed to by \funcparam{*out} is allocated before use and should be
-freed when the caller is finished with it.
-
-\begin{funcdecl}{krb5_db_setup_mkey_name}{krb5_error_code}{\funcin}
-\funcarg{const}{char *keyname}
-\funcarg{const}{char *realm}
-\funcout
-\funcarg{char **}{fullname}
-\funcarg{krb5_principal *}{principal}
-\end{funcdecl}
-
-Given a key name \funcparam{keyname} and a realm name \funcparam{realm},
-construct a principal which can be used to fetch the master key from the
-database. This principal is filled into \funcparam{*principal};
-\funcparam{*principal} should be freed by \funcname{krb5_free_principal}
-when the caller is finished.
-
-If \funcparam{keyname} is NULL, the default key name will be used.
-
-If \funcparam{fullname} is not NULL, it is set to point to a string
-representation of the complete principal name; its storage may be freed
-by calling \funcname{free} on \funcparam{*fullname}.
-
+++ /dev/null
-The key table functions deal with storing and retrieving service keys
-for use by unattended services which participate in authentication exchanges.
-
-Keytab routines should all be atomic. Every routine that acquires
-a non-sharable resource must release it before it returns. For
-example, an implementation is not allowed to leave a file open
-for writing or to have a lock on a file.
-
-Any keytab implementations must support multiple concurrent sequential scans.
-
-The order of values returned from \funcname{krb5_kt_next_entry} is
-unspecified and may be sorted to the implementor's convenience.
-
-Although the ``right thing'' should happen if the program aborts
-abnormally, a close routine is provided for freeing resources,
-etc. People should use the close routine when they are
-finished.
-
-\subsubsection{Per-type functions}
-The following entry points must be implemented for each type of
-key table; however, application programs are not expected to call
-\funcname{krb5_kt_resolve_internal}, \funcname{krb5_kt_remove_internal},
-or \funcname{krb5_kt_add_internal} directly.
-
-In order to reduce the size of binary programs when static linking is
-used, it is common to provide two \datatype{krb5_kt_ops} structures for
-each key table type, one for reading only in which the pointers to the
-add and delete functions are zero, and one for reading and writing.
-
-\begin{funcdecl}{krb5_kt_resolve_internal}{krb5_error_code}{\funcin}
-\funcarg{char *}{residual}
-\funcout
-\funcarg{krb5_keytab *}{id}
-\end{funcdecl}
-
-Fills in \funcparam{*id} with a handle identifying the keytab with name
-``residual''. The interpretation of ``residual'' is dependent on the
-type of keytab.
-
-\begin{funcdecl}{krb5_kt_get_name}{krb5_error_code}{\funcin}
-\funcarg{krb5_keytab}{id}
-\funcout
-\funcarg{char *}{name,}
-\funcin
-\funcarg{int}{namesize}
-\end{funcdecl}
-
-\funcarg{name} is filled in with the first \funcparam{namesize} bytes of
-the name of the keytab identified by \funcname{id}.
-If the name is shorter than \funcparam{namesize}, then \funcarg{name}
-will be null-terminated.
-
-\begin{funcdecl}{krb5_kt_close}{krb5_error_code}{\funcin}
-\funcarg{krb5_keytab}{id}
-\end{funcdecl}
-
-Closes the keytab identified by \funcparam{id} and invalidates
-\funcparam{id}, and releases any other resources acquired during use of
-the key table.
-
-Requires that \funcparam{id} identifies a valid credentials cache.
-
-\begin{funcdecl}{krb5_kt_get_entry}{krb5_error_code}{\funcin}
-\funcarg{krb5_keytab}{id}
-\funcarg{krb5_principal}{principal}
-\funcarg{krb5_kvno}{vno}
-\funcout
-\funcarg{krb5_keytab_entry *}{entry}
-\end{funcdecl}
-
-Searches the keytab identified by \funcparam{id} for an entry whose
-principal matches \funcparam{principal} and
-whose key version number matches \funcparam{vno}. If \funcparam{vno} is
-zero, the first entry whose principal matches is returned.
-
-Returns an error code if no suitable entry is found. If an entry is
-found, the entry is returned in \funcparam{*entry}; its contents should
-be deallocated by calling \funcname{krb5_kt_free_entry} when no longer
-needed.
-
-\begin{funcdecl}{krb5_kt_free_entry}{krb5_error_code}{\funcinout}
-\funcarg{krb5_keytab_entry *}{entry}
-\end{funcdecl}
-
-Releases all storage allocated for \funcparam{entry}, which must point
-to a structure previously filled in by \funcname{krb5_kt_get_entry} or
-\funcname{krb5_kt_next_entry}.
-
-\begin{funcdecl}{krb5_kt_start_seq_get}{krb5_error_code}{\funcin}
-\funcarg{krb5_keytab}{id}
-\funcout
-\funcarg{krb5_kt_cursor *}{cursor}
-\end{funcdecl}
-
-Prepares to read sequentially every key in the keytab identified by
-\funcparam{id}.
-\funcparam{cursor} is filled in with a cursor to be used in calls to
-\funcname{krb5_kt_next_entry}.
-
-\begin{funcdecl}{krb5_kt_next_entry}{krb5_error_code}{\funcin}
-\funcarg{krb5_keytab}{id}
-\funcout
-\funcarg{krb5_keytab_entry *}{entry}
-\funcinout
-\funcarg{krb5_kt_cursor}{cursor}
-\end{funcdecl}
-
-Fetches the ``next'' entry in the keytab, returning it in
-\funcparam{*entry}, and updates \funcparam{*cursor} for the next
-request. If the keytab changes during the sequential get, an error is
-guaranteed. \funcparam{*entry} should be freed after use by calling
-\funcname{krb5_kt_free_entry}.
-
-Requires that \funcparam{id} identifies a valid credentials cache. and
-\funcparam{*cursor} be a cursor returned by
-\funcname{krb5_kt_start_seq_get} or a subsequent call to
-\funcname{krb5_kt_next_entry}.
-
-Errors: error code if no more cache entries or if the keytab changes.
-
-\begin{funcdecl}{krb5_kt_end_seq_get}{krb5_error_code}{\funcin}
-\funcarg{krb5_keytab}{id}
-\funcarg{krb5_kt_cursor}{cursor}
-\end{funcdecl}
-
-Finishes sequential processing mode and invalidates \funcparam{cursor},
-which must never be re-used after this call.
-
-Requires that \funcparam{id} identifies a valid credentials cache. and
-\funcparam{*cursor} be a cursor returned by
-\funcname{krb5_kt_start_seq_get} or a subsequent call to
-\funcname{krb5_kt_next_entry}.
-
-May return error code if \funcparam{cursor} is invalid.
-
-\begin{funcdecl}{krb5_kt_remove_internal}{krb5_error_code}{\funcin}
-\funcarg{krb5_keytab}{id}
-\funcarg{krb5_keytab_entry *}{entry}
-\end{funcdecl}
-
-Searches the keytab \funcparam{id} for an entry that exactly matches
-\funcparam{entry}. If one is found, it is removed from the keytab.
-
-Returns an error code if not found.
-
-
-\begin{funcdecl}{krb5_kt_add_internal}{krb5_error_code}{\funcin}
-\funcarg{krb5_keytab}{id}
-\funcarg{krb5_keytab_entry *}{entry}
-\end{funcdecl}
-
-Stores \funcparam{entry} in the keytab \funcparam{id}.
-Fails if the entry already exists.
-
-This operation must, within the constraints of the operating system, not
-return until it can verify that the write has completed succesfully.
-For example, in a UNIX file-based implementation, this routine (or the part
-of the underlying implementation that it calls) would be responsible for
-doing an \funcname{fsync} on the file before returning.
-
-Returns an error code if \funcparam{entry} is already present in the
-keytab or if the key could not be stored (quota problem, etc).
-
-
-\subsubsection{Glue functions}
-The following functions are implemented in the base library and serve to
-glue together the various types of key tables.
-
-\begin{funcdecl}{krb5_kt_register}{krb5_error_code}{\funcin}
-\funcarg{krb5_kt_ops *}{ops}
-\end{funcdecl}
-
-
-Adds a new ticket cache type to the set recognized by
-\funcname{krb5_kt_resolve}.
-Requires that a keytab type named \funcparam{ops{\ptsto}prefix} is not
-yet known.
-
-An error is returned if \funcparam{ops{\ptsto}prefix} is already known.
-
-\begin{funcdecl}{krb5_kt_resolve}{krb5_error_code}{\funcin}
-\funcarg{char *}{string_name}
-\funcout
-\funcarg{krb5_keytab *}{id}
-\end{funcdecl}
-
-Fills in \funcparam{*id} with a handle identifying the keytab with name
-``string_name''. The keytab is not opened.
-Requires that \funcparam{string_name} be of the form ``type:residual'' and
-``type'' is a type known to the library.
-
-Errors: badly formatted name.
-
-\begin{funcdecl}{krb5_kt_default_name}{krb5_error_code}{\funcin}
-\funcarg{char *}{name}
-\funcarg{int}{namesize}
-\end{funcdecl}
-
-\funcparam{name} is filled in with the first \funcparam{namesize} bytes of
-the name of the default keytab.
-If the name is shorter than \funcparam{namesize}, then the remainder of
-\funcparam{name} will be zeroed.
-
-
-\begin{funcdecl}{krb5_kt_default}{krb5_error_code}{\funcin}
-\funcarg{krb5_keytab *}{id}
-\end{funcdecl}
-
-Fills in \funcparam{id} with a handle identifying the default keytab.
-
-\begin{funcdecl}{krb5_kt_read_service_key}{krb5_error_code}{\funcin}
-\funcarg{krb5_pointer}{keyprocarg}
-\funcarg{krb5_principal}{principal}
-\funcarg{krb5_kvno}{vno}
-\funcout
-\funcarg{krb5_keyblock **}{key}
-\end{funcdecl}
-
-This function is suitable for use as a parameter to
-\funcname{krb5_rd_req}.
-
-If \funcname{keyprocarg} is not NULL, it is taken to be a
-\datatype{char *} denoting the name of a keytab. Otherwise, the default
-keytab will be used.
-The keytab is opened and searched for the entry identified by
-\funcparam{principal} and \funcparam{vno}, returning the resulting key
-in \funcparam{*key} or returning an error code if it is not found.
-
-\funcname{krb5_free_keyblock} should be called on \funcparam{*key} when
-the caller is finished with the key.
-
-Returns an error code if the entry is not found.
-
-\begin{funcdecl}{krb5_kt_add_entry}{krb5_error_code}{\funcin}
-\funcarg{krb5_keytab}{id}
-\funcarg{krb5_keytab_entry *}{entry}
-\end{funcdecl}
-
-Calls the keytab-specific add routine \funcname{krb5_kt_add_internal}
-with the same function arguments. If this routine is not available,
-then KRB5_KT_NOWRITE is returned.
-
-\begin{funcdecl}{krb5_kt_remove_entry}{krb5_error_code}{\funcin}
-\funcarg{krb5_keytab}{id}
-\funcarg{krb5_keytab_entry *}{entry}
-\end{funcdecl}
-
-Calls the keytab-specific remove routine
-\funcname{krb5_kt_remove_internal} with the same function arguments.
-If this routine is not available, then KRB5_KT_NOWRITE is returned.
+++ /dev/null
-The operating-system specific functions provide an interface between the
-other parts of the \libname{libkrb5.a} libraries and the operating system.
-
-Beware! Any of the functions below are allowed to be implemented as
-macros. Prototypes for functions can be found in {\tt
-<krb5/libos-proto.h>}; other definitions (including macros, if used) are
-in {\tt <krb5/libos.h>}.
-
-The following global symbols are provided in \libname{libos.a}. If you
-wish to substitute for any of them, you must substitute for all of them
-(they are all declared and initialized in the same object file):
-\begin{description}
-% These come from src/lib/osconfig.c
-\item[extern char *\globalname{krb5_config_file}:] name of configuration file
-\item[extern char *\globalname{krb5_trans_file}:] name of hostname/realm
-name translation file
-\item[extern char *\globalname{krb5_defkeyname}:] default name of key
-table file
-\item[extern char *\globalname{krb5_lname_file}:] name of aname/lname
-translation database
-\item[extern int \globalname{krb5_max_dgram_size}:] maximum allowable
-datagram size
-\item[extern int \globalname{krb5_max_skdc_timeout}:] maximum
-per-message KDC reply timeout
-\item[extern int \globalname{krb5_skdc_timeout_shift}:] shift factor
-(bits) to exponentially back-off the KDC timeouts
-\item[extern int \globalname{krb5_skdc_timeout_1}:] initial KDC timeout
-\item[extern char *\globalname{krb5_kdc_udp_portname}:] name of KDC UDP port
-\item[extern char *\globalname{krb5_default_pwd_prompt1}:] first prompt
-for password reading.
-\item[extern char *\globalname{krb5_default_pwd_prompt2}:] second prompt
-
-\end{description}
-
-\begin{funcdecl}{krb5_read_password}{krb5_error_code}{\funcin}
-\funcarg{char *}{prompt}
-\funcarg{char *}{prompt2}
-\funcout
-\funcarg{char *}{return_pwd}
-\funcinout
-\funcarg{int *}{size_return}
-\end{funcdecl}
-
-Read a password from the keyboard. The first \funcparam{*size_return}
-bytes of the password entered are returned in \funcparam{return_pwd}.
-If fewer than \funcparam{*size_return} bytes are typed as a password,
-the remainder of \funcparam{return_pwd} is zeroed. Upon success, the
-total number of bytes filled in is stored in \funcparam{*size_return}.
-
-\funcparam{prompt} is used as the prompt for the first reading of a password.
-It is printed to the terminal, and then a password is read from the
-keyboard. No newline or spaces are emitted between the prompt and the
-cursor, unless the newline/space is included in the prompt.
-
-If \funcparam{prompt2} is a null pointer, then the password is read
-once. If \funcparam{prompt2} is set, then it is used as a prompt to
-read another password in the same manner as described for
-\funcparam{prompt}. After the second password is read, the two
-passwords are compared, and an error is returned if they are not
-identical.
-
-Echoing is turned off when the password is read.
-
-If there is an error in reading or verifying the password, an error code
-is returned; else zero is returned.
-
-\begin{funcdecl}{krb5_lock_file}{krb5_error_code}{\funcvoid}
-\funcarg{FILE *}{filep}
-\funcarg{char *}{pathname}
-\funcarg{int}{mode}
-\end{funcdecl}
-
-Attempts to lock the file in the given \funcparam{mode}; returns 0 for a
-successful lock, or an error code otherwise.
-
-The caller should arrange that both \funcparam{filep} and
-\funcparam{pathname} refer to the same
-file. The implementation may use whichever is more convenient.
-
-Modes are given in {\tt <krb5/libos.h>}
-
-
-\begin{funcdecl}{krb5_unlock_file}{krb5_error_code}{\funcvoid}
-\funcarg{FILE *}{filep}
-\funcarg{char *}{pathname}
-\end{funcdecl}
-
-Attempts to (completely) unlock the file. Returns 0 if successful,
-or an error code otherwise.
-
-The caller should arrange that both \funcparam{filep} and
-\funcparam{pathname} refer to the same file. The implementation may
-use whichever is more convenient.
-
-\begin{funcdecl}{krb5_timeofday}{krb5_error_code}{\funcout}
-\funcarg{krb5_int32 *}{timeret}
-\end{funcdecl}
-
-Retrieves the system time of day, in seconds since the local system's
-epoch.
-[The ASN.1 encoding routines must convert this to the standard ASN.1
-encoding as needed]
-
-\begin{funcdecl}{krb5_us_timeofday}{krb5_error_code}{\funcout}
-\funcarg{krb5_int32 *}{seconds}
-\funcarg{krb5_int32 *}{microseconds}
-\end{funcdecl}
-
-Retrieves the system time of day, in seconds since the local system's
-epoch.
-[The ASN.1 encoding routines must convert this to the standard ASN.1
-encoding as needed]
-
-The seconds portion is returned in \funcparam{*seconds}, the
-microseconds portion in \funcparam{*microseconds}.
-
-\begin{funcdecl}{krb5_net_read}{int}{\funcin}
-\funcarg{int}{fd}
-\funcout
-\funcarg{char *}{buf}
-\funcin
-\funcarg{int}{len}
-\end{funcdecl}
-
-Like read(2), but guarantees that it reads as much as was requested
-or returns -1 and sets errno.
-
-(make sure your sender will send all the stuff you are looking for!)
-Only useful on stream sockets and pipes.
-
-\begin{funcdecl}{krb5_net_write}{int}{\funcin}
-\funcarg{int}{fd}
-\funcarg{const char *}{buf}
-\funcarg{int}{len}
-\end{funcdecl}
-
-Like write(2), but guarantees that it writes as much as was requested
-or returns -1 and sets errno.
-
-Only useful on stream sockets and pipes.
-
-\begin{funcdecl}{krb5_os_localaddr}{krb5_error_code}{\funcout}
-\funcarg{krb5_address ***}{addr}
-\end{funcdecl}
-
-Return all the protocol addresses of this host.
-
-Compile-time configuration flags will indicate which protocol family
-addresses might be returned.
-\funcparam{*addr} is filled in to point to an array of address pointers,
-terminated by a null pointer. All the storage pointed to is allocated
-and should be freed by the caller with \funcname{krb5_free_address}
-when no longer needed.
-
-
-\begin{funcdecl}{krb5_sendto_kdc}{krb5_error_code}{\funcin}
-\funcarg{krb5_data *}{send}
-\funcarg{krb5_data *}{realm}
-\funcout
-\funcarg{krb5_data *}{receive}
-\end{funcdecl}
-
-Send the message \funcparam{send} to a KDC for realm \funcparam{realm} and
-return the response (if any) in \funcparam{receive}.
-
-If the message is sent and a response is received, 0 is returned,
-otherwise an error code is returned.
-
-The storage for \funcparam{receive} is allocated and should be freed by
-the caller when finished.
-
-\begin{funcdecl}{krb5_get_krbhst}{krb5_error_code}{\funcin}
-\funcarg{krb5_data *}{realm}
-\funcout
-\funcarg{char ***}{hostlist}
-\end{funcdecl}
-
-Figures out the Kerberos server names for the given \funcparam{realm},
-filling in
-\funcparam{hostlist} with a
-pointer to an argv[] style list of names, terminated with a null
-pointer.
-
-If \funcparam{realm} is unknown, the filled-in pointer is set to NULL.
-
-The pointer array and strings pointed to are all in allocated storage,
-and should be freed by the caller when finished.
-
-Returns system errors.
-
-\begin{funcdecl}{krb5_free_krbhst}{krb5_error_code}{\funcin}
-\funcarg{char **}{hostlist}
-\end{funcdecl}
-
-Frees the storage taken by a host list returned by \funcname{krb5_get_krbhst}.
-
-\begin{funcdecl}{krb5_aname_to_localname}{krb5_error_code}{\funcin}
-\funcarg{krb5_principal}{aname}
-\funcarg{int}{lnsize}
-\funcout
-\funcarg{char *}{lname}
-\end{funcdecl}
-
-Converts a principal name \funcparam{aname} to a local name suitable for use by
-programs wishing a translation to an environment-specific name (e.g.
-user account name).
-
-\funcparam{lnsize} specifies the maximum length name that is to be filled into
-\funcparam{lname}.
-The translation will be null terminated in all non-error returns.
-
-Returns system errors.
-
-\begin{funcdecl}{krb5_get_default_realm}{krb5_error_code}{\funcin}
-\funcarg{int}{lnsize}
-\funcout
-\funcarg{char *}{lrealm}
-\end{funcdecl}
-
-Retrieves the default realm to be used if no user-specified realm is
-available (e.g. to interpret a user-typed principal name with the
-realm omitted for convenience).
-
-\funcparam{lnsize} specifies the maximum length name that is to be filled into
-\funcparam{lrealm}.
-
-Returns system errors.
-
-\begin{funcdecl}{krb5_get_host_realm}{krb5_error_code}{\funcin}
-\funcarg{char *}{host}
-\funcout
-\funcarg{char ***}{realmlist}
-\end{funcdecl}
-
-Figures out the Kerberos realm names for \funcparam{host}, filling in
-\funcparam{realmlist} with a
-pointer to an argv[] style list of names, terminated with a null pointer.
-
-If \funcparam{host} is NULL, the local host's realms are determined.
-
-If there are no known realms for the host, the filled-in pointer is set
-to NULL.
-
-The pointer array and strings pointed to are all in allocated storage,
-and should be freed by the caller when finished.
-
-Returns system errors.
-
-\begin{funcdecl}{krb5_free_host_realm}{krb5_error_code}{\funcin}
-\funcarg{char **}{realmlist}
-\end{funcdecl}
-
-Frees the storage taken by a \funcparam{realmlist} returned by
-\funcname{krb5_get_local_realm}.
-
-\begin{funcdecl}{krb5_kuserok}{krb5_boolean}{\funcin}
-\funcarg{krb5_principal}{principal}
-\funcarg{const char *}{luser}
-\end{funcdecl}
-
-Given a Kerberos principal \funcparam{principal}, and a local username
-\funcparam{luser},
-determine whether user is authorized to login to the account \funcparam{luser}.
-Returns TRUE if authorized, FALSE if not authorized.
-
-\begin{funcdecl}{krb5_random_confounder}{krb5_error_code}{\funcin}
-\funcarg{int}{size}
-\funcout
-\funcarg{krb5_pointer}{fillin}
-\end{funcdecl}
-
-Given a length and a pointer, fills in the area pointed to by
-\funcparam{fillin} with \funcparam{size} random octets suitable for use
-in a confounder.
+++ /dev/null
-The replay cache functions deal with verifying that AP_REQ's do not
-contain duplicate authenticators; the storage must be non-volatile for
-the site-determined validity period of authenticators.
-
-Each replay cache has a string ``name'' associated with it. The use of
-this name is dependent on the underlying caching strategy (for
-file-based things, it would be a cache file name). The
-caching strategy should use non-volatile storage so that replay
-integrity can be maintained across system failures.
-
-\subsubsection{Per-type functions}
-The following entry points must be implemented for each type of
-credentials cache.
-
-\begin{funcdecl}{krb5_rc_initialize}{krb5_error_code}{\funcin}
-\funcarg{krb5_rcache}{id}
-\funcarg{krb5_deltat}{auth_lifespan}
-\end{funcdecl}
-
-Creates/refreshes the replay cache identified by \funcparam{id} and sets its
-authenticator lifespan to \funcparam{auth_lifespan}. If the
-replay cache already exists, its contents are destroyed.
-
-Errors: permission errors, system errors
-
-\begin{funcdecl}{krb5_rc_recover}{krb5_error_code}{\funcin}
-\funcarg{krb5_rcache}{id}
-\end{funcdecl}
-Attempts to recover the replay cache \funcparam{id}, (presumably after a
-system crash or server restart).
-
-Errors: error indicating that no cache was found to recover
-
-\begin{funcdecl}{krb5_rc_destroy}{krb5_error_code}{\funcin}
-\funcarg{krb5_rcache}{id}
-\end{funcdecl}
-
-Destroys the replay cache \funcparam{id}.
-Requires that \funcparam{id} identifies a valid replay cache.
-
-Errors: permission errors.
-
-\begin{funcdecl}{krb5_rc_close}{krb5_error_code}{\funcin}
-\funcarg{krb5_rcache}{id}
-\end{funcdecl}
-
-Closes the replay cache \funcparam{id}, invalidates \funcparam{id},
-and releases any other resources acquired during use of the replay cache.
-Requires that \funcparam{id} identifies a valid replay cache.
-
-Errors: permission errors
-
-\begin{funcdecl}{krb5_rc_store}{krb5_error_code}{\funcin}
-\funcarg{krb5_rcache}{id}
-\funcarg{krb5_tkt_authent *}{tkt_auth}
-\end{funcdecl}
-Stores \funcparam{tkt_auth} in the replay cache \funcparam{id}.
-Requires that \funcparam{id} identifies a valid replay cache.
-
-Returns KRB5KRB_AP_ERR_REPEAT if \funcparam{tkt_auth} is already in the
-cache. May also return permission errors, storage failure errors.
-
-\begin{funcdecl}{krb5_rc_expunge}{krb5_error_code}{\funcin}
-\funcarg{krb5_rcache}{id}
-\end{funcdecl}
-Removes all expired replay information (i.e. those entries which are
-older than then authenticator lifespan of the cache) from the cache
-\funcparam{id}. Requires that \funcparam{id} identifies a valid replay
-cache.
-
-Errors: permission errors.
-
-\begin{funcdecl}{krb5_rc_get_lifespan}{krb5_error_code}{\funcin}
-\funcarg{krb5_rcache}{id}
-\funcout
-\funcarg{krb5_deltat *}{auth_lifespan}
-\end{funcdecl}
-Fills in \funcparam{auth_lifespan} with the lifespan of
-the cache \funcparam{id}.
-Requires that \funcparam{id} identifies a valid replay cache.
-
-\begin{funcdecl}{krb5_rc_resolve}{krb5_error_code}{\funcinout}
-\funcarg{krb5_rcache}{id}
-\funcin
-\funcarg{char *}{name}
-\end{funcdecl}
-
-Initializes private data attached to \funcparam{id}. This function MUST
-be called before the other per-replay cache functions.
-
-Requires that \funcparam{id} points to allocated space, with an
-initialized \funcparam{id{\ptsto}ops} field.
-
-Returns: allocation errors.
-
-
-\begin{funcdecl}{krb5_rc_get_name}{char *}{\funcin}
-\funcarg{krb5_rcache}{id}
-\end{funcdecl}
-
-Returns the name (excluding the type) of the rcache \funcparam{id}.
-Requires that \funcparam{id} identifies a valid replay cache.
-
-\subsubsection{Glue functions}
-The following functions are implemented in the base library and serve to
-glue together the various types of replay caches.
-
-\begin{funcdecl}{krb5_rc_resolve_full}{krb5_error_code}{\funcinout}
-\funcarg{krb5_rcache *}{id}
-\funcin
-\funcarg{char *}{string_name}
-\end{funcdecl}
-
-\funcparam{id} is filled in to identify a replay cache which
-corresponds to the name in \funcparam{string_name}. The cache is not opened.
-Requires that \funcparam{string_name} be of the form ``type:residual''
-and that ``type'' is a type known to the library.
-
-Errors: error if cannot resolve name.
-
-\begin{funcdecl}{krb5_rc_register_type}{krb5_error_code}{\funcin}
-\funcarg{krb5_rc_ops *}{ops}
-\end{funcdecl}
-Adds a new replay cache type implemented and identified by
-\funcparam{ops} to the set recognized by
-\funcname{krb5_rc_resolve}. Requires that a ticket cache type named
-\funcparam{ops{\ptsto}prefix} is not yet known.
-
-
-\begin{funcdecl}{krb5_rc_default_name}{char *}{\funcvoid}
-\end{funcdecl}
-Returns the name of the default replay cache; this may be equivalent to
-\funcnamenoparens{getenv}({\tt "KRB5RCACHE"}) with an appropriate fallback.
-
-\begin{funcdecl}{krb5_rc_default_type}{char *}{\funcvoid}
-\end{funcdecl}
-
-Returns the type of the default replay cache.
-
-\begin{funcdecl}{krb5_rc_default}{krb5_error_code}{\funcinout}
-\funcarg{krb5_rcache *}{id}
-\end{funcdecl}
-Equivalent to \funcnamenoparens{krb5_rc_resolve_full}(\funcparam{id},
-\funcnamenoparens{strcat}(\funcnamenoparens{strcat}(\funcname{krb5_rc_default_type},``:''),
-\funcname{krb5_rc_default_name})) (except of course you can't do the
-strcat's with the return values\ldots).
+++ /dev/null
-; To build a symlink tree, do:
-;
-; /mit/synctree/synctree -s /mit/krb5/src -d /mit/krb5/@sys
-
-map * $
-
-copy *;d
-link *;r
-link include/stdc-incl
-link include/isode-6.0
-link config
-copy include/isode
-copy *Makefile
-ignore *~
-ignore *RCS
-ignore *Makefile.bak
-ignore *,v
-ignore *.o
-ignore *.a
-ignore include/isode-5.0
-ignore prototype
-ignore lib/des.v4
-ignore *.rconf
projects / krb5.git / commitdiff