+++ /dev/null
-############################################################
-## config/pre.in
-## common prefix for all Makefile.in in the Kerberos V5 tree.
-##
-
-WHAT = unix
-SHELL=/bin/sh
-
-all:: all-$(WHAT)
-
-clean:: clean-$(WHAT)
-
-distclean:: distclean-$(WHAT)
-
-install:: install-$(WHAT)
-
-check:: check-$(WHAT)
-
-install-headers:: install-headers-$(WHAT)
-
-##############################
-# Recursion rule support
-#
-
-# The commands for the recursion targets live in config/post.in.
-#
-# General form of recursion rules:
-#
-# Each recursive target foo-unix has related targets: foo-prerecurse,
-# foo-recurse, and foo-postrecurse
-#
-# The foo-recurse rule is in post.in. It is what actually recursively
-# calls make.
-#
-# foo-recurse depends on foo-prerecurse, so any targets that must be
-# built before descending into subdirectories must be dependencies of
-# foo-prerecurse.
-#
-# foo-postrecurse depends on foo-recurse, but targets that must be
-# built after descending into subdirectories should be have
-# foo-recurse as dependencies in addition to being listed under
-# foo-postrecurse, to avoid ordering issues.
-#
-# The foo-prerecurse, foo-recurse, and foo-postrecurse rules are all
-# single-colon rules, to avoid nasty ordering problems with
-# double-colon rules.
-#
-# e.g.
-# all:: includes foo
-# foo:
-# echo foo
-# includes::
-# echo bar
-# includes::
-# echo baz
-#
-# will result in "bar", "foo", "baz" on AIX, and possibly others.
-all-unix:: all-postrecurse
-all-postrecurse: all-recurse
-all-recurse: all-prerecurse
-
-all-prerecurse:
-all-postrecurse:
-
-clean-unix:: clean-postrecurse
-clean-postrecurse: clean-recurse
-clean-recurse: clean-prerecurse
-
-clean-prerecurse:
-clean-postrecurse:
-
-distclean-unix: distclean-postrecurse
-distclean-postrecurse: distclean-recurse
-distclean-recurse: distclean-prerecurse
-
-distclean-prerecurse:
-distclean-postrecurse:
-
-install-unix:: install-postrecurse
-install-postrecurse: install-recurse
-install-recurse: install-prerecurse
-
-install-prerecurse:
-install-postrecurse:
-
-install-headers-unix:: install-headers-postrecurse
-install-headers-postrecurse: install-headers-recurse
-install-headers-recurse: install-headers-prerecurse
-
-install-headers-prerecurse:
-install-headers-postrecurse:
-
-check-unix:: check-postrecurse
-check-postrecurse: check-recurse
-check-recurse: check-prerecurse
-
-check-prerecurse:
-check-postrecurse:
-
-Makefiles: Makefiles-postrecurse
-Makefiles-postrecurse: Makefiles-recurse
-Makefiles-recurse: Makefiles-prerecurse
-
-Makefiles-prerecurse:
-Makefiles-postrecurse:
-
-#
-# end recursion rule support
-##############################
-
-# Directory syntax:
-#
-# begin relative path
-REL=
-# this is magic... should only be used for preceding a program invocation
-C=./
-# "/" for UNIX, "\" for Windows; *sigh*
-S=/
-
-SUBDIRS = $(LOCAL_SUBDIRS)
-srcdir = .
-SRCTOP = ./$(BUILDTOP)
-
-CONFIG_RELTOPDIR = ../..
-
-ALL_CFLAGS = $(DEFS) $(DEFINES) $(LOCALINCLUDES) $(CPPFLAGS) $(CFLAGS)
-CFLAGS = -g
-CPPFLAGS = -I$(BUILDTOP)/include -I$(SRCTOP)/include -I$(BUILDTOP)/include/krb5 -I$(SRCTOP)/include/krb5 -I/usr/athena/include -DKRB5_KRB4_COMPAT -DKRB5_PRIVATE=1
-DEFS = -DHAVE_CONFIG_H
-CC = /usr/gcc/bin/gcc
-LD = $(PURE) /usr/gcc/bin/gcc
-DEPLIBS = @DEPLIBS@
-LDFLAGS = -L/usr/athena/lib
-LD_UNRESOLVED_PREFIX = @LD_UNRESOLVED_PREFIX@
-LD_SHLIBDIR_PREFIX = @LD_SHLIBDIR_PREFIX@
-LDARGS = @LDARGS@
-LIBS = -lsocket -lnsl -lresolv
-SRVLIBS = @SRVLIBS@
-SRVDEPLIBS = @SRVDEPLIBS@
-CLNTLIBS = @CLNTLIBS@
-CLNTDEPLIBS = @CLNTDEPLIBS@
-
-INSTALL=/usr/athena/bin/install -c
-INSTALL_STRIP=
-INSTALL_PROGRAM=${INSTALL} $(INSTALL_STRIP)
-INSTALL_DATA=${INSTALL} -m 644
-INSTALL_SHLIB=$(INSTALL_DATA)
-INSTALL_SETUID=$(INSTALL) $(INSTALL_STRIP) -m 4755 -o root
-## This is needed because autoconf will sometimes define ${prefix} to be
-## ${prefix}.
-prefix=/usr/local
-INSTALL_PREFIX=$(prefix)
-INSTALL_EXEC_PREFIX=${prefix}
-exec_prefix=${prefix}
-SHLIB_TAIL_COMP=@SHLIB_TAIL_COMP@
-
-KRB5MANROOT = ${prefix}/man
-ADMIN_BINDIR = ${exec_prefix}/sbin
-SERVER_BINDIR = ${exec_prefix}/sbin
-CLIENT_BINDIR =${exec_prefix}/bin
-ADMIN_MANDIR = $(KRB5MANROOT)/man8
-SERVER_MANDIR = $(KRB5MANROOT)/man8
-CLIENT_MANDIR = $(KRB5MANROOT)/man1
-FILE_MANDIR = $(KRB5MANROOT)/man5
-KRB5_LIBDIR = ${exec_prefix}/lib
-KRB5_SHLIBDIR = ${exec_prefix}/lib$(SHLIB_TAIL_COMP)
-KRB5_INCDIR = ${prefix}/include
-KRB5_INCSUBDIRS = \
- $(KRB5_INCDIR)/gssapi \
- $(KRB5_INCDIR)/kerberosIV
-
-#
-# Macros used by the KADM5 (OV-based) unit test system.
-# XXX check which of these are actually used!
-#
-TESTDIR = $(BUILDTOP)/kadmin/testing
-STESTDIR = $(SRCTOP)/kadmin/testing
-COMPARE_DUMP = $(TESTDIR)/scripts/compare_dump.pl
-FIX_CONF_FILES = $(TESTDIR)/scripts/fixup-conf-files.pl
-INITDB = $(STESTDIR)/scripts/init_db
-MAKE_KEYTAB = $(TESTDIR)/scripts/make-host-keytab.pl
-LOCAL_MAKE_KEYTAB= $(TESTDIR)/scripts/make-host-keytab.pl
-RESTORE_FILES = $(STESTDIR)/scripts/restore_files.sh
-SAVE_FILES = $(STESTDIR)/scripts/save_files.sh
-ENV_SETUP = $(TESTDIR)/scripts/env-setup.sh
-CLNTTCL = $(TESTDIR)/util/ovsec_kadm_clnt_tcl
-SRVTCL = $(TESTDIR)/util/ovsec_kadm_srv_tcl
-# Dejagnu variables.
-# We have to set the host with --host so that setup_xfail will work.
-# If we don't set it, then the host type used is "native", which
-# doesn't match "*-*-*".
-host=sparc-sun-solaris2.8
-DEJAFLAGS = $(DEJALFLAGS) $(CLFLAGS) --debug --srcdir $(srcdir) --host \
- $(host)
-RUNTEST = runtest $(DEJAFLAGS)
-
-START_SERVERS = $(STESTDIR)/scripts/start_servers $(TEST_SERVER) $(TEST_PATH)
-START_SERVERS_LOCAL = $(STESTDIR)/scripts/start_servers_local
-
-STOP_SERVERS = $(STESTDIR)/scripts/stop_servers $(TEST_SERVER) $(TEST_PATH)
-STOP_SERVERS_LOCAL = $(STESTDIR)/scripts/stop_servers_local
-#
-# End of macros for the KADM5 unit test system.
-#
-
-transform = s,x,x,
-
-RM = rm -f
-CP = cp
-MV = mv -f
-CHMOD=chmod
-RANLIB = ranlib
-ARCHIVE = @ARCHIVE@
-ARADD = @ARADD@
-LN = ln -s
-AWK = @AWK@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-YACC = @YACC@
-AUTOCONF = autoconf
-AUTOCONFFLAGS =
-AUTOCONFINCFLAGS = --localdir
-AUTOHEADER = autoheader
-AUTOHEADERFLAGS =
-
-HOST_TYPE = @HOST_TYPE@
-SHEXT = @SHEXT@
-STEXT=@STEXT@
-VEXT=@VEXT@
-DO_MAKE_SHLIB = @DO_MAKE_SHLIB@
-SHLIB_STATIC_TARGET=@SHLIB_STATIC_TARGET@
-
-TOPLIBD = $(BUILDTOP)/lib
-
-OBJEXT = o
-LIBEXT = a
-EXEEXT =
-
-#
-# variables for libraries, for use in linking programs
-# -- this may want to get broken out into a separate frag later
-#
-#
-# Note: the following variables must be set in any Makefile.in that
-# uses KRB5_BUILD_PROGRAM
-#
-# PROG_LIBPATH list of dirs, in -Ldir form, to search for libraries at link
-# PROG_RPATH list of dirs, in dir1:dir2 form, for rpath purposes
-#
-# invocation is like:
-# prog: foo.o bar.o $(KRB5_BASE_DEPLIBS)
-# $(CC_LINK) -o $@ foo.o bar.o $(KRB5_BASE_LIBS)
-
-
-CC_LINK=$(PURE) $(CC) $(PROG_LIBPATH) $(LDFLAGS)
-
-# prefix (with no spaces after) for rpath flag to cc
-RPATH_FLAG=-R
-
-# this gets set by configure to either $(STLIBEXT) or $(SHLIBEXT),
-# depending on whether we're building with shared libraries.
-DEPLIBEXT=.a
-
-KADMCLNT_DEPLIB = $(TOPLIBD)/libkadm5clnt$(DEPLIBEXT)
-KADMSRV_DEPLIB = $(TOPLIBD)/libkadm5srv$(DEPLIBEXT)
-KDB5_DEPLIB = $(TOPLIBD)/libkdb5$(DEPLIBEXT)
-DB_DEPLIB = $(DB_DEPLIB-k5)
-DB_DEPLIB-k5 = $(TOPLIBD)/libdb$(DEPLIBEXT)
-DB_DEPLIB-sys =
-GSSRPC_DEPLIB = $(TOPLIBD)/libgssrpc$(DEPLIBEXT)
-GSS_DEPLIB = $(TOPLIBD)/libgssapi_krb5$(DEPLIBEXT)
-KRB4_DEPLIB = $(TOPLIBD)/libkrb4$(DEPLIBEXT) # $(TOPLIBD)/libkrb4$(DEPLIBEXT)
-DES425_DEPLIB = $(TOPLIBD)/libdes425$(DEPLIBEXT) # $(TOPLIBD)/libdes425$(DEPLIBEXT)
-KRB5_DEPLIB = $(TOPLIBD)/libkrb5$(DEPLIBEXT)
-CRYPTO_DEPLIB = $(TOPLIBD)/libk5crypto$(DEPLIBEXT)
-COM_ERR_DEPLIB = $(COM_ERR_DEPLIB-k5)
-COM_ERR_DEPLIB-sys = # empty
-COM_ERR_DEPLIB-k5 = $(TOPLIBD)/libcom_err$(DEPLIBEXT)
-
-# These are forced to use ".a" as an extension because they're never
-# built shared.
-SS_DEPLIB = $(SS_DEPLIB-k5)
-SS_DEPLIB-k5 = $(TOPLIBD)/libss.a
-SS_DEPLIB-sys =
-KRB524_DEPLIB = $(BUILDTOP)/krb524/libkrb524.a
-PTY_DEPLIB = $(TOPLIBD)/libpty.a
-
-KRB5_BASE_DEPLIBS = $(KRB5_DEPLIB) $(CRYPTO_DEPLIB) $(COM_ERR_DEPLIB)
-KRB4COMPAT_DEPLIBS = $(KRB4_DEPLIB) $(DES425_DEPLIB) $(KRB5_BASE_DEPLIBS)
-KDB5_DEPLIBS = $(KDB5_DEPLIB) $(DB_DEPLIB)
-GSS_DEPLIBS = $(GSS_DEPLIB)
-GSSRPC_DEPLIBS = $(GSSRPC_DEPLIB) $(GSS_DEPLIBS)
-KADM_COMM_DEPLIBS = $(GSSRPC_DEPLIBS) $(KDB5_DEPLIBS) $(GSSRPC_DEPLIBS)
-KADMSRV_DEPLIBS = $(KADMSRV_DEPLIB) $(KDB5_DEPLIBS) $(KADM_COMM_DEPLIBS)
-KADMCLNT_DEPLIBS = $(KADMCLNT_DEPLIB) $(KADM_COMM_DEPLIBS)
-
-# Header file dependencies we might override.
-# See util/depfix.sed.
-# Also see depend-verify-* in post.in, which wants to confirm that we're using
-# the in-tree versions.
-COM_ERR_VERSION = k5
-COM_ERR_DEPS = $(COM_ERR_DEPS-k5)
-COM_ERR_DEPS-sys =
-COM_ERR_DEPS-k5 = $(BUILDTOP)/include/com_err.h
-SS_VERSION = k5
-SS_DEPS = $(SS_DEPS-k5)
-SS_DEPS-sys =
-SS_DEPS-k5 = $(BUILDTOP)/include/ss/ss.h $(BUILDTOP)/include/ss/ss_err.h
-DB_VERSION = k5
-DB_DEPS = $(DB_DEPS-k5)
-DB_DEPS-sys =
-DB_DEPS-k5 = $(BUILDTOP)/include/db.h $(BUILDTOP)/include/db-config.h
-DB_DEPS-redirect = $(BUILDTOP)/include/db.h
-
-# Header file dependencies that might depend on whether krb4 support
-# is compiled.
-
-KRB_ERR_H_DEP = $(BUILDTOP)/include/kerberosIV/krb_err.h
-KRB524_H_DEP = $(BUILDTOP)/include/krb524.h
-KRB524_ERR_H_DEP= $(BUILDTOP)/include/krb524_err.h
-
-# LIBS gets substituted in... e.g. -lnsl -lsocket
-
-# GEN_LIB is -lgen if needed for regexp
-GEN_LIB =
-
-SS_LIB = $(SS_LIB-k5)
-SS_LIB-sys =
-SS_LIB-k5 = $(TOPLIBD)/libss.a
-KDB5_LIB = -lkdb5
-DB_LIB = -ldb
-
-KRB5_LIB = -lkrb5
-K5CRYPTO_LIB = -lk5crypto
-COM_ERR_LIB = -lcom_err
-GSS_KRB5_LIB = -lgssapi_krb5
-
-# KRB4_LIB is -lkrb4 if building --with-krb4
-# needs fixing if ever used on Mac OS X!
-KRB4_LIB = -lkrb4
-
-# DES425_LIB is -ldes425 if building --with-krb4
-# needs fixing if ever used on Mac OS X!
-DES425_LIB = -ldes425
-
-# KRB524_LIB is $(BUILDTOP)/krb524/libkrb524.a if building --with-krb4
-# needs fixing if ever used on Mac OS X!
-KRB524_LIB = $(BUILDTOP)/krb524/libkrb524.a
-
-# HESIOD_LIBS is -lhesiod...
-HESIOD_LIBS =
-
-KRB5_BASE_LIBS = $(KRB5_LIB) $(K5CRYPTO_LIB) $(COM_ERR_LIB) $(GEN_LIB) $(LIBS)
-KRB4COMPAT_LIBS = $(KRB4_LIB) $(DES425_LIB) $(KRB5_BASE_LIBS)
-KDB5_LIBS = $(KDB5_LIB) $(DB_LIB)
-GSS_LIBS = $(GSS_KRB5_LIB)
-# needs fixing if ever used on Mac OS X!
-GSSRPC_LIBS = -lgssrpc $(GSS_LIBS)
-KADM_COMM_LIBS = $(GSSRPC_LIBS)
-# need fixing if ever used on Mac OS X!
-KADMSRV_LIBS = -lkadm5srv $(HESIOD_LIBS) $(KDB5_LIBS) $(KADM_COMM_LIBS)
-KADMCLNT_LIBS = -lkadm5clnt $(KADM_COMM_LIBS)
-
-# need fixing if ever used on Mac OS X!
-PTY_LIB = -lpty
-
-#
-# some more stuff for --with-krb4
-KRB4_LIBPATH =
-KRB4_INCLUDES = -I$(SRCTOP)/include/kerberosIV -I$(BUILDTOP)/include/kerberosIV
-
-#
-# variables for --with-tcl=
-TCL_LIBS = @TCL_LIBS@
-TCL_LIBPATH = @TCL_LIBPATH@
-TCL_RPATH = @TCL_RPATH@
-TCL_MAYBE_RPATH = @TCL_MAYBE_RPATH@
-TCL_INCLUDES = @TCL_INCLUDES@
-
-# error table rules
-#
-### /* these are invoked as $(...) foo.et, which works, but could be better */
-COMPILE_ET= $(COMPILE_ET-k5)
-COMPILE_ET-sys= compile_et
-COMPILE_ET-k5= $(BUILDTOP)/util/et/compile_et -d $(SRCTOP)/util/et
-
-.SUFFIXES: .h .c .et .ct
-
-# These versions cause both .c and .h files to be generated at once.
-# But GNU make doesn't understand this, and parallel builds can trigger
-# both of them at once, causing them to stomp on each other. The versions
-# below only update one of the files, so compile_et has to get run twice,
-# but it won't break parallel builds.
-#.et.h: ; $(COMPILE_ET) $<
-#.et.c: ; $(COMPILE_ET) $<
-
-.et.h:
- d=ettmp$$$$ ; (cp $< $$d.et && $(COMPILE_ET) $$d.et && mv $$d.h $*.h) ; \
- e=$$? ; rm -f $$d.* ; exit $$e
-
-.et.c:
- d=ettmp$$$$ ; (cp $< $$d.et && $(COMPILE_ET) $$d.et && mv $$d.c $*.c) ; \
- e=$$? ; rm -f $$d.* ; exit $$e
-
-# rule to make object files
-#
-.SUFFIXES: .c .o
-.c.o:
- $(CC) $(ALL_CFLAGS) -c $<
-
-# ss command table rules
-#
-MAKE_COMMANDS= $(MAKE_COMMANDS-k5)
-MAKE_COMMANDS-sys= mk_cmds
-MAKE_COMMANDS-k5= $(BUILDTOP)/util/ss/mk_cmds
-
-.ct.c:
- $(MAKE_COMMANDS) $<
-
-##
-## end of pre.in
-############################################################
-thisconfigdir=./..
-myfulldir=util/db2/test
-mydir=test
-BUILDTOP=$(REL)..$(S)..$(S)..
-
-FCTSH = /usr/bin/sh
-TMPDIR=.
-
-LOCALINCLUDES= -I. -I$(srcdir)/../include -I../include -I$(srcdir)/../mpool \
- -I$(srcdir)/../btree -I$(srcdir)/../hash -I$(srcdir)/../db
-
-PROG_LIBPATH=-L$(TOPLIBD)
-PROG_RPATH=$(KRB5_LIBDIR)
-
-KRB5_RUN_ENV=
-
-all::
-
-dbtest: dbtest.o $(DB_DEPLIB)
- $(CC_LINK) -o $@ dbtest.o $(STRERROR_OBJ) $(DB_LIB)
-
-check:: dbtest
- $(KRB5_RUN_ENV) srcdir=$(srcdir) TMPDIR=$(TMPDIR) $(FCTSH) $(srcdir)/run.test
-
-bttest.o: $(srcdir)/btree.tests/main.c
- $(CC) $(ALL_CFLAGS) -c $(srcdir)/btree.tests/main.c -o $@
-
-bttest: bttest.o $(DB_DEPLIB)
- $(CC_LINK) -o $@ bttest.o $(STRERROR_OBJ) $(DB_LIB)
-
-clean-unix::
- $(RM) dbtest.o dbtest __dbtest
- $(RM) bttest.o bttest
-############################################################
-## config/post.in
-##
-
-# in case there is no default target (very unlikely)
-all::
-
-check-windows::
-
-##############################
-# dependency generation
-#
-
-depend:: depend-postrecurse
-depend-postrecurse: depend-recurse
-depend-recurse: depend-prerecurse
-
-depend-prerecurse:
-depend-postrecurse:
-
-depend-postrecurse: depend-update-makefile
-
-ALL_DEP_SRCS= $(SRCS) $(EXTRADEPSRCS)
-
-# be sure to check ALL_DEP_SRCS against *what it would be if SRCS and
-# EXTRADEPSRCS are both empty*
-.depend-verify-srcdir:
- @if test "$(srcdir)" = "." ; then \
- echo 1>&2 error: cannot build dependencies with srcdir=. ; \
- echo 1>&2 "(can't distinguish generated files from source files)" ; \
- exit 1 ; \
- else \
- if test -r .depend-verify-srcdir; then :; \
- else (set -x; touch .depend-verify-srcdir); fi \
- fi
-.depend-verify-et: depend-verify-et-$(COM_ERR_VERSION)
-depend-verify-et-k5:
- @if test -r .depend-verify-et; then :; \
- else (set -x; touch .depend-verify-et); fi
-depend-verify-et-sys:
- @echo 1>&2 error: cannot build dependencies using system et package
- @exit 1
-.depend-verify-ss: depend-verify-ss-$(SS_VERSION)
-depend-verify-ss-k5:
- @if test -r .depend-verify-ss; then :; \
- else (set -x; touch .depend-verify-ss); fi
-depend-verify-ss-sys:
- @echo 1>&2 error: cannot build dependencies using system ss package
- @exit 1
-.depend-verify-db: depend-verify-db-$(DB_VERSION)
-depend-verify-db-k5:
- @if test -r .depend-verify-db; then :; \
- else (set -x; touch .depend-verify-db); fi
-depend-verify-db-sys:
- @echo 1>&2 error: cannot build dependencies using system db package
- @exit 1
-.depend-verify-gcc: depend-verify-gcc-yes
-depend-verify-gcc-yes:
- @if test -r .depend-verify-gcc; then :; \
- else (set -x; touch .depend-verify-gcc); fi
-depend-verify-gcc-no:
- @echo 1>&2 error: The '"depend"' rules are written for gcc.
- @echo 1>&2 Please use gcc, or update the rules to handle your compiler.
- @exit 1
-
-DEP_CFG_VERIFY = .depend-verify-srcdir \
- .depend-verify-et .depend-verify-ss .depend-verify-db
-DEP_VERIFY = $(DEP_CFG_VERIFY) .depend-verify-gcc
-
-.d: $(ALL_DEP_SRCS) $(DEP_CFG_VERIFY) depend-dependencies
- if test "$(ALL_DEP_SRCS)" != " " ; then \
- $(RM) .dtmp && $(MAKE) .dtmp && mv -f .dtmp .d ; \
- else \
- touch .d ; \
- fi
-
-# These are dependencies of the depend target that do not get fed to
-# the compiler. Examples include generated header files.
-depend-dependencies:
-
-# .dtmp must *always* be out of date so that $? can be used to perform
-# VPATH searches on the sources.
-#
-# NOTE: This will fail when using Make programs whose VPATH support is
-# broken.
-.dtmp: $(ALL_DEP_SRCS)
- $(CC) -M $(ALL_CFLAGS) $? > .dtmp
-
-# Generate a script for dropping in the appropriate make variables, using
-# directory-specific parameters. General substitutions independent of local
-# make variables happen in depfix.sed.
-.depfix2.sed: .depend-verify-gcc Makefile $(SRCTOP)/util/depgen.sed
- x=`$(CC) -print-libgcc-file-name` ; \
- echo '$(SRCTOP)' '$(myfulldir)' '$(srcdir)' '$(BUILDTOP)' "$$x" | sed -f $(SRCTOP)/util/depgen.sed > .depfix2.tmp
- mv -f .depfix2.tmp .depfix2.sed
-
-DEPLIBOBJNAMEFIX = sed -e 's;^\$$(OUTPRE)\([a-zA-Z0-9_\-]*\)\.\$$(OBJEXT):;\1.so \1.po &;'
-
-# NOTE: This will also generate spurious $(OUTPRE) and $(OBJEXT)
-# references in rules for non-library objects in a directory where
-# library objects happen to be built. It's mostly harmless.
-.depend: .d .depfix2.sed $(SRCTOP)/util/depfix.sed
- sed -f .depfix2.sed < .d | sed -f $(SRCTOP)/util/depfix.sed | \
- (if test "x$(STLIBOBJS)" != "x"; then $(DEPLIBOBJNAMEFIX) ; else cat; fi ) \
- > .depend
-
-depend-update-makefile: .depend depend-recurse
- if test -n "$(SRCS)" ; then \
- sed -e '/^# +++ Dependency line eater +++/,$$d' \
- < $(srcdir)/Makefile.in | cat - .depend \
- > $(srcdir)/Makefile.in.new; \
- $(SRCTOP)/config/move-if-changed $(srcdir)/Makefile.in.new $(srcdir)/Makefile.in ; \
- else :; fi
-
-DEPTARGETS = .depend .d .dtmp .depfix2.sed .depfix2.tmp $(DEP_VERIFY)
-
-#
-# end dependency generation
-##############################
-
-clean:: clean-$(WHAT)
-
-clean-unix::
- $(RM) $(OBJS) $(DEPTARGETS)
-
-clean-windows::
- $(RM) *.$(OBJEXT)
- $(RM) msvc.pdb *.err
-
-distclean:: distclean-$(WHAT)
-
-distclean-normal-clean:
- $(MAKE) NORECURSE=true clean
-distclean-prerecurse: distclean-normal-clean
-distclean-nuke-configure-state:
- $(RM) config.log config.cache config.status Makefile
-distclean-postrecurse: distclean-nuke-configure-state
-
-Makefiles-prerecurse: Makefile
-
-# thisconfigdir = relative path from this Makefile to config.status
-# mydir = relative path from config.status to this Makefile
-Makefile: $(srcdir)/Makefile.in $(thisconfigdir)/config.status \
- $(SRCTOP)/config/pre.in $(SRCTOP)/config/post.in
- cd $(thisconfigdir) && $(SHELL) config.status $(mydir)/Makefile
-$(thisconfigdir)/config.status: $(srcdir)/$(thisconfigdir)/configure
- cd $(thisconfigdir) && $(SHELL) config.status --recheck
-$(srcdir)/$(thisconfigdir)/configure: $(srcdir)/$(thisconfigdir)/configure.in \
- $(SRCTOP)/aclocal.m4
- -$(RM) -r $(srcdir)/$(thisconfigdir)/autom4te.cache
- cd $(srcdir)/$(thisconfigdir) && \
- $(AUTOCONF) ${AUTOCONFINCFLAGS}=$(CONFIG_RELTOPDIR) $(AUTOCONFFLAGS)
- -$(RM) -r $(srcdir)/$(thisconfigdir)/autom4te.cache
-
-RECURSE_TARGETS=all-recurse clean-recurse distclean-recurse install-recurse \
- check-recurse depend-recurse Makefiles-recurse install-headers-recurse
-
-# MY_SUBDIRS overrides any setting of SUBDIRS generated by the
-# configure script that generated this Makefile. This is needed when
-# the configure script that produced this Makefile creates multiple
-# Makefiles in different directories; the setting of SUBDIRS will be
-# the same in each.
-#
-# LOCAL_SUBDIRS seems to account for the case where the configure
-# script doesn't call any other subsidiary configure scripts, but
-# generates multiple Makefiles.
-$(RECURSE_TARGETS):
- @case "`echo 'x$(MFLAGS)'|sed -e 's/^x//' -e 's/ --.*$$//'`" \
- in *[ik]*) e="status=1" ;; *) e="exit 1";; esac; \
- if test -z "$(MY_SUBDIRS)" ; then \
- do_subdirs="$(SUBDIRS)" ; \
- else \
- do_subdirs="$(MY_SUBDIRS)" ; \
- fi; \
- status=0; \
- if test -n "$$do_subdirs" && test -z "$(NORECURSE)"; then \
- for i in $$do_subdirs ; do \
- if test -d $$i && test -r $$i/Makefile ; then \
- case $$i in .);; *) \
- target=`echo $@|sed s/-recurse//`; \
- echo "making $$target in $(CURRENT_DIR)$$i..."; \
- if (cd $$i ; $(MAKE) \
- CURRENT_DIR=$(CURRENT_DIR)$$i/ $$target) then :; \
- else eval $$e; fi; \
- ;; \
- esac; \
- else \
- echo "Skipping missing directory $(CURRENT_DIR)$$i" ; \
- fi; \
- done; \
- else :; \
- fi;\
- exit $$status
-
-##
-## end of post.in
-############################################################
projects / krb5.git / commitdiff