2 \ f07
\ f0FF1
\ f07 |
\ f0FF2
\ f07 |
\ f0CF3
\ f07 |
\ f0FF4
\ f07 |
\ f0FF5
\ f07 |
\ f0FF6
\ f07 |
\ f0FF7
\ f07
\ f0CSystemRescueCd
\ f07
\ f09[boot options]
\ f07
4 \ f0C*
\ f07 You can add the following boot options after the image name:
5 You must add these options after the boot image (F2 for images). You should use
6 the default boot image name (
\ f0Frescuecd
\ f07) in most cases. For instance if you
7 want to load the whole system into the memory type this:
\ f0Frescuecd docache
\ f07
9 \ f0Fdocache
\ f07
\ f0Ccopy the system in RAM
\ f07: you can eject the cd, requires 300MB of RAM
10 \ f0Fsetkmap=x
\ f07
\ f0Cconfigure the keyboard
\ f07 with the x keymap (x='fr', 'de', 'us', ...)
11 \ f0Froot=x
\ f07
\ f0Croot=/dev/sda1
\ f07 boots from
\ f0F/dev/sda1
\ f07,
\ f0Croot=auto
\ f07 scans the disks
12 \ f0Fforcevesa
\ f07
\ f0Cuse the
\ f0CXvesa
\ f07 grahical server instead of
\ f0CXorg
\ f07 when you type startx
13 \ f0Fnoload=x
\ f07
\ f0Cprevent a bad module
\ f07 from being loaded at startup (eg: noload=3c59x)
14 \ f0Fdoload=x
\ f07
\ f0Cforce to load one/several modules
\ f07 at startup (eg: doload=3c59x)
15 \ f0Frootpass=x
\ f07 sets the
\ f0Croot password
\ f07 to x so that you can ssh to the system
16 \ f0Fethx=ip
\ f07 automatically
\ f0Cconfigure the ethernet
\ f07 interfaces with an ip address
17 \ f0Fgateway=ip
\ f07 automatically
\ f0Cset the default route
\ f07 in the network configuration
18 \ f0Fdns=ip
\ f07 automatically configure the ip address of the
\ f0CDNS server
\ f07 to use
19 \ f0Fdostartx
\ f07 Runs the
\ f0Cgraphical environment
\ f07 automatically at boot time
20 \ f0Fminishell
\ f07 Run the
\ f0Cdebug shell
\ f07 from the initramfs during the boot process
22 \ f0C*
\ f07 Press
\ f0FF2
\ f07 for the list of the boot images (use
\ f0Frescuecd
\ f07 by default)
23 \ f0C*
\ f07 Press
\ f0FF5
\ f07 for boot options related to boot problems and troubleshooting.
24 \ f0C*
\ f07 Press
\ f0FF7
\ f07 for the list of the other options related to the network