git.tremily.us Git - portage.git/log

It may be nice to have prefix around if the default datadir is defined on top of it.

svn path=/main/branches/prefix/; revision=8276

... and make it also compiling again on Solaris

svn path=/main/branches/prefix/; revision=8228

Patch from haubi to also compile on HPUX/ia64

svn path=/main/branches/prefix/; revision=8227

Allow to override EPREFIX, basically for the purpose of "cloning" a
prefix install, or to facilitate a cross-compilation environment.

svn path=/main/branches/prefix/; revision=8216

   Merged from trunk 8175:8186

   | 8176    | Use the python version of eerror                             |
   | genone  |                                                              |

   | 8177    | The ERROR color code is currently undefined, so make eerror  |
   | zmedico | use BAD like the bash version does.                          |

   | 8178    | Pass the whole cpv to elog instead of just ${PF}.            |
   | zmedico |                                                              |

   | 8179    | Bug #196427 - Don't display news notifications when in       |
   | zmedico | --pretend mode.                                              |

   | 8180    | Don't show each character of the log message on a new line   |
   | zmedico | when displaying messages that came from one of the           |
   |         | python-based elog functions. This might not be the correct   |
   |         | solution but it seems to work for now.                       |

   | 8181    | Fix broken call to renamed _combine_logentries().            |
   | zmedico |                                                              |

   | 8182    | Prevent _combine_logentries() from generating redundant      |
   | zmedico | consecutive 'TYPE: phase' lines that show in summary.log     |
   |         | when the python-based elog functions are used.               |

   | 8183    | Use a list to buffer strings in _combine_logentries() and do |
   | zmedico | a single concatenation at the end for better efficiency.     |

   | 8184    | Refactor _merge_logentries() to make it a little more        |
   | zmedico | efficient.                                                   |

   | 8185    | Bug #196435 - Add some more references to quickpkg(1) since  |
   | zmedico | sometimes people don't realize that it exists.               |

   | 8186    | Remove the config.setinst() call from depgraph.select_dep()  |
   | zmedico | since it's never really guaranteed to work as intended. It's |
   |         | supposed to help ensure that the correct old-style virtual   |
   |         | is preferred but it will often fail to do so, making it      |
   |         | necessary for the user to manually force the preference.     |
   |         | Proper backtracking (bug #1343) will solve the problem more  |
   |         | reliably.                                                    |

svn path=/main/branches/prefix/; revision=8211

   Merged from trunk 8150:8174

   | 8151    | In dblink.getcontents(), use a regular expression to detect  |
   | zmedico | when path normalization is required. Also, only join with    |
   |         | ${ROOT} when necessary. This allows unnecessary normpath and |
   |         | join calls to be optimized away in the general case,         |
   |         | reducing the cpu time for `equery belongs ` by about 50%. M  |
   |         | pym/portage/dbapi/vartree.py                                 |

   | 8152    | Only re.compile() the normalize_needed pattern once rather   |
   | zmedico | than for each dblink constructor call.                       |

   | 8153    | Optimize dblink.isowner() to use fewer stat calls by only    |
   | zmedico | collecting stat results for parent directories. This         |
   |         | provides equivalent accuracy to the previous approach but    |
   |         | will perform much better when used to scan all installed     |
   |         | packages for owners in the event of a file collision.        |

   | 8154    | Bug #196043 - Implement a `portageq owners []+` command that |
   | zmedico | is suitable for identifying all packages that own one or     |
   |         | more files when a file collision has occurred. This uses     |
   |         | dblink.isowner() so that the query works properly even when  |
   |         | paths are ambiguous due to symlinked directories.            |

   | 8155    | Bug #196043 - Update the file collision ewarn notice to try  |
   | zmedico | and clarify the cases when a bug should NOT be filed. Also,  |
   |         | recommend the new `portageq owners / ` command since it      |
   |         | works properly even when paths are ambiguous due to          |
   |         | symlinked directories.                                       |

   | 8161    | Add missing "to" to fix grammer.                             |
   | zmedico |                                                              |

   | 8163    | Bug #196043 - Unify the ouput handling for file collisions   |
   | zmedico | so that similar eerror messages are generated whether or not |
   |         | collision-protect is enabled.                                |

   | 8166    | Fix the normalize_needed regex to properly match // anywhere |
   | zmedico | in the path. Also add support for detection of . or .. where |
   |         | appropriate.                                                 |

   | 8168    | Fix collision-protect so that it properly cancels the        |
   | zmedico | preinst phase like it used to.                               |

   | 8170    | Adjust quote usage in collision-protect eerror output.       |
   | zmedico |                                                              |

   | 8172    | Bug #195375 - Make dblink.treewalk() read inforoot/SLOT      |
   | zmedico | since it differs from the expected SLOT value when when      |
   |         | USE=multislot is enabled. A warning message will be shown if |
   |         | the slot differs and --quiet mode is not enabled.            |

   | 8174    | Handle EnvironmentError instead of OSError since open()      |
   | zmedico | actually raises IOError. Also, treat a missing SLOT file as  |
   |         | SLOT="" since it is currently possible to install an ebuild  |
   |         | with an undefined SLOT even though repoman generates a       |
   |         | SLOT.missing error with such an ebuild.                      |

svn path=/main/branches/prefix/; revision=8210

Replay the move from revision 8142, because svn does not properly do it.

svn path=/main/branches/prefix/; revision=8205

Show that we are checking things, and add check for S_ISWHT to allow for compilation on Linux

svn path=/main/branches/prefix/; revision=8127

I missed a D.

svn path=/main/branches/prefix/; revision=8123

   Merged from trunk 8113:8121

   | 8114    | In the file collision eerror output, don't colorize the file |
   | zmedico | paths since the escape codes look ugly in the log.           |

   | 8115    | Remove unused import.                                        |
   | zmedico |                                                              |

   | 8117    | Avoid an error message from find when "${D}"/usr/share does  |
   | zmedico | not exist.                                                   |

   | 8119    | In some cases, openpty can be slow when it fails. Therefore, |
   | zmedico | stop trying to use it after the first failure.               |

   | 8121    | Remove the checks for files in symlinked directories from    |
   | zmedico | the collision protect code since it hasn't been needed ever  |
   |         | since the followSymlinks parameter was disabled for          |
   |         | portage.listdir() calls in order to prevent infinite         |
   |         | recursion loops.                                             |

svn path=/main/branches/prefix/; revision=8122

Greatly speed-up creating a tarball by omitting .svn directories during
copying.

svn path=/main/branches/prefix/; revision=8113

Solaris is slightly different, use configure to find out what we need.
We compile on Darwin, Solaris and FreeBSD now. Probably Linux breaks.

svn path=/main/branches/prefix/; revision=8112

Make FreeBSD happy, and fix inverted guard.

svn path=/main/branches/prefix/; revision=8111

It helps a lot when you merge the actual "fixed" files by chpathtool
instead of those in the temporary unpack location.

svn path=/main/branches/prefix/; revision=8110

Suppress chpathtool's warnings with -q

svn path=/main/branches/prefix/; revision=8109

small but essential : forgotten

svn path=/main/branches/prefix/; revision=8108

my autojungle knowledge sucks, fix complaints by autoconf

svn path=/main/branches/prefix/; revision=8107

   Merged from trunk 8085:8102

   | 8086    | Bug #195527 - Unconditionally detect file collisions and log |
   | zmedico | them as eerror messages via elog. This will allow us to      |
   |         | collect more file collision data but it won't be quite as    |
   |         | annoying as enabling collision-protect by default would be.  |

   | 8087    | Bug #195527 - Add some more information to the file          |
   | zmedico | collision eerror message to try and prevent user confusion:  |
   |         | - Hint that `equery belongs ` can be used to find the        |
   |         | installed package that owns a file. - Advise then NOT to     |
   |         | file a bug without reporting exactly which two packages      |
   |         | install the same file(s).                                    |

   | 8089    | s:this package wants:this package will:                      |
   | zmedico |                                                              |

   | 8091    | Remove a redundant call to elog_process().                   |
   | zmedico |                                                              |

   | 8093    | Bug #195370 - Filter some more bogus matches due to          |
   | zmedico | old-style virtuals.                                          |

   | 8096    | In dblink.treewalk(), use os.walk() instead of               |
   | zmedico | portage.listdir() in order to avoid cacheddir() bloat when   |
   |         | listing the files to be merged from ${D}.                    |

   | 8097    | Use os.listdir() instead of portage.listdir() in             |
   | zmedico | dblink.mergeme().                                            |

   | 8098    | Remove a chdir() call that's no longer needed for the        |
   | zmedico | collision-protect symlink code.                              |

   | 8100    | Make the file collision eerror message less verbose when in  |
   | zmedico | --quiet mode.                                                |

   | 8102    | Handle the PortageException that can be raised from          |
   | zmedico | portage.mail.send_mail().                                    |

svn path=/main/branches/prefix/; revision=8106

Use the new chpathtool.

If we install on a system with a different prefix, unpack in the
workdir, instead of the image dir.  We "copy" from the workdir to the
image using chpathtool, which behaves as a cp -a.

chpathtool was changed to copy file by file, changing paths it finds in
files to overcome the following problem.  chpathtool was used in a piped
fashion, like this:

bzip2 -d file | chpathtool | tar -x

in this way, chpathtool operated on the raw tar-stream, changing paths
it saw over the stream.  This has the following advantages:
- not only rpaths, library locations, or hardcoded paths to conf files
  were changed, but also the location of the files in the filesystem
  themselves, as chpathtool also changed the tar envelope
- just one run over the stream, simple, easy and cheap from an fork/exec
  perspective
- no need to deal with file attributes, creation modes, etc, tar dealt
  with that, chpathtool only changed paths where appropriate

However, when doing the path changements, chpathtool inserts padding
bytes at the end of each string it sees, in order not to break offsets
stored in e.g. programs to point in the TEXT or DATA spaces.  Because
text files are in the tar stream, chpathtool sees the end of string at
the end of such text file, and inserts the padding null-bytes there.
However, tar still has an administration for each file of its size, so
as result, tar writes the padding null-bytes to the text files.  In most
cases this doesn't hurt, however, some applications, such as GHC get
confused by it, because EOF isn't found, but null-bytes don't make sense
for them.

The only way to fix this, without interpreting the tar envelope, is to
use chpathtool per file.  chpathtool doesn't write padding bytes if it
doesn't find an end of string, which in textfiles doesn't exist (instead
you get the EOF).  Running find -exec, or with xargs results in a
serious performance problem due to numerous fork/exec calls.  Instead,
chpathtool was changed to recursively walk directories, and process all
what is in there.

Because chpathtool operates on files in this case, it needs to properly
behave, such that it doesn't change the properties of each file it
replicates.  For this reason, chpathtool's implementation grew twice its
original size in order to retain the original file's permissions,
owners, and times.

svn path=/main/branches/prefix/; revision=8105

Retain access and modification times for files and directories.

svn path=/main/branches/prefix/; revision=8104

Intermediate commit.

Finished stage1 of chpathtool pimp-up.

The idea is that chpathtool copies a directory into another, doing its
job, retaining the files' properties, like cp -a (ok, cp -pPR) would do.
The implementation is now up to copying, setting the permission bits and
owner stuff. TODO: the *times, and then it should be done.

svn path=/main/branches/prefix/; revision=8095

send warnings to stdout instead of stderr

svn path=/main/branches/prefix/; revision=8085

Portage and quickpkg generate slightly different tarballs (the former
makes paths like ./usr/bin/bla whereas the latter makes paths like
usr/bin/bla), hack Portage such that it can deal with its own format as
well. (quickpkg format used to work before)

svn path=/main/branches/prefix/; revision=8084

Use PORTAGE_BINHOST as repo_path(_real) such that instead of a ? for
repository, we show it's url to the binhost in use.

svn path=/main/branches/prefix/; revision=8083

I have some rotten binpkgs floating around, they don't have a EPREFIX
key, avoid Python KeyErroring out on them.

svn path=/main/branches/prefix/; revision=8082

Solve bug where portage would not "see" my binhost because
PORTAGE_BINHOST didn't end with a /. This is actually caused by urljoin
not operating like os.path.join would do.

svn path=/main/branches/prefix/; revision=8081

Optimise some more: take the EAPI from portage.const, as most packages
will probably be that EAPI (at least that is what we would like). At
least in Prefix there are no packages with EAPI != portage.const.EAPI

svn path=/main/branches/prefix/; revision=8080

With the help of zmedico Prefix binary support should be working fully optimal and correct now

svn path=/main/branches/prefix/; revision=8079

Fix syntax error

svn path=/main/branches/prefix/; revision=8078

Resolve merge error.

svn path=/main/branches/prefix/; revision=8027

Fix up installing of sets.conf

svn path=/main/branches/prefix/; revision=8026

Also create the target directory

svn path=/main/branches/prefix/; revision=8024

It helps a lot if you define a variable you use lateron

svn path=/main/branches/prefix/; revision=8022

Install sets.conf in datarootdir/portage.

svn path=/main/branches/prefix/; revision=8020

Look /in/ the prefix

svn path=/main/branches/prefix/; revision=8006

Don't spit out ${D}

svn path=/main/branches/prefix/; revision=8005

Vimdiff with trunk to make python happy

svn path=/main/branches/prefix/; revision=7964

   Merged from trunk 7903:7908

   | 7904     | In the EbuildQuote check, combine the var_assignment regex  |
   | zmedico  | together with the ignore_line regex. This also fixes an     |
   |          | issue with the var_assignment regex allowing violations     |
   |          | like `make DESTDIR=${D}` to slip through.                   |

   | 7905     | Eliminate confusing false positive error messages for       |
   | zmedico  | SRC_URI.syntax and digestentry.unused that are reported     |
   |          | when the SRC_URI for one or more ebuilds can't be parsed    |
   |          | for some reason. There's no point in producing a false      |
   |          | error here since the root cause will produce a valid error  |
   |          | elsewhere, such as "SRC_URI.syntax" or "ebuild.sytax".      |
   |          | Also, update the docs for the "ebuild.syntax" error to      |
   |          | indicate that a digest verification failure can trigger it. |

   | 7907     | this isnt part of gentoolkit anymore                        |
   | SpankMan |                                                             |

   | 7908     | no need to use "function" when defining a function          |
   | SpankMan |                                                             |

svn path=/main/branches/prefix/; revision=7953

1 tab -> 4 spaces.

Mixing those upsets python. It appears this file is using spaces
instead of tabs, i.e. it is not consistent with the other python files
which use tabs.

svn path=/main/branches/prefix/; revision=7903

Align with zmedico

svn path=/main/branches/prefix/; revision=7889

- only use PORTAGE_TMPDIR /after/ it is set
- don't chown ${TMP} to what in theory should be our own, especially
since GID isn't set.

svn path=/main/branches/prefix/; revision=7888

Portage generates ED (and D) with a trailing /, this means that at least
internally we can do things right and avoid double slashes. This solves
at least gtk+-2.12.0 compilation which uses einstall. libtool isn't
charmed by the double slashes.

svn path=/main/branches/prefix/; revision=7886

Moved EPREFIX check from late-die when installing a binary package to
resolving phase, like the CHOST check.

svn path=/main/branches/prefix/; revision=7885

   Merged from trunk 7838:7877

   | 7839     | someone seriously screwed the pooch on whitespacing here so |
   | SpankMan | clean it all up                                             |

   | 7840     | Fix a typo.                                                 |
   | zmedico  |                                                             |

   | 7842     | align the filename and line numbers in the output of the    |
   | SpankMan | stack dump so that it is much easier to read                |

   | 7844     | Display a short notification when an existing               |
   | zmedico  | ${T}/environment sourced since it is easy to ignore and     |
   |          | ignorance of it often leads to mysterious problems and      |
   |          | general confusion. This message should not show in cases    |
   |          | where it is obviously irrelevant, FEATURES=noauto, or       |
   |          | PORTAGE_QUIET=1.                                            |

   | 7846     | Do the stale env check/warning after the digest/manifest    |
   | zmedico  | phase when necessary.                                       |

   | 7848     | Bug #193486 - Use xargs to avoid 'bash: /bin/rm: Argument   |
   | zmedico  | list too long' errors. This patch uses a weird tr '\001'    |
   |          | '\000' workaround since bash doesn't echo null bytes like   |
   |          | one might expect.                                           |

   | 7850     | Bug #193486 - Use echo -n and properly quote the array      |
   | zmedico  | argument.                                                   |

   | 7852     | with help from Donnie and Ulrich, use sed to extract the    |
   | SpankMan | statement that led to the call to die so we can print it    |
   |          | out in our error message                                    |

   | 7853     | Bug #194025 - Lock /var/db/pkg in post_merge() during the   |
   | zmedico  | "Regenerating GNU info directory index" routine.            |

   | 7856     | Ignore ENOTDIR from unmerge unlink calls.                   |
   | zmedico  |                                                             |

   | 7858     | Move a newline to fix formatting.                           |
   | zmedico  |                                                             |

   | 7861     | Simplify update_eclasses() a little.                        |
   | zmedico  |                                                             |

   | 7864     | Move prelink tempfile cleanup to the finally block and      |
   | zmedico  | remove unused locking code.                                 |

   | 7866     | Handle KeyError thrown from aux_get().                      |
   | zmedico  |                                                             |

   | 7869     | Bug #194081 - Add EBUSY to the list of ignored errnos for   |
   | zmedico  | unlink and rmdir calls during unmerge.                      |

   | 7871     | Bug #193548 - When emerge spawns find to search for config  |
   | zmedico  | updates, show the find output if there is an error.         |

   | 7873     | When scanning for config updates, treat a symlink to an     |
   | zmedico  | existing directory as if it's just a normal directory.      |

   | 7875     | Bug #193548 - When scanning for config updates and an error |
   | zmedico  | occurs, send find's stdout to /dev/null so that only an     |
   |          | error message is shown.                                     |

   | 7877     | Bug #194095 - Validate dispatch-conf input in order to      |
   | zmedico  | prevent spurious input characters from being interpreted as |
   |          | user input (which can be quite confusing and gives an "out  |
   |          | of control" feeling).                                       |

svn path=/main/branches/prefix/; revision=7883

   Merged from trunk 7792:7838

   | 7793     | When --with-bdeps=y is enabled for built packages, pull in  |
   | zmedico  | build time deps as requested, but marked them as            |
   |          | "satisfied" since they are not strictly required. This      |
   |          | allows more freedom in the merge order calculation for      |
   |          | solving circular dependencies. Don't convert to PDEPEND     |
   |          | since that could make --with-bdeps=y less effective if it   |
   |          | is used to adjust merge order to prevent built_with_use()   |
   |          | calls from failing.                                         |

   | 7794     | Flush stdout before calling pkg_info() to ensure that       |
   | zmedico  | output always shows in the correct order.                   |

   | 7795     | Flush stderr and stdout if their file descriptors are in    |
   | zmedico  | fd_pipes at the beginning of spawn().                       |

   | 7796     | In spawn(), initialize default fd_pipes before doing the    |
   | zmedico  | stdout/stderr flush.                                        |

   | 7797     | When --deep is not enabled, many dependencies are dicarded  |
   | zmedico  | and left out of the digraph. This patch prevents            |
   |          | dependencies from being discarded in some cases where the   |
   |          | are needed in order to optimize merge order. It also        |
   |          | modifies the DepPriority.rebuild attribute so that it only  |
   |          | applies to build time dependencies. This leads to better    |
   |          | merge order in some cases when --deep is not enabled. For   |
   |          | example, `emerge xf86-input-keyboard xorg-server` will now  |
   |          | properly merge xorg-server before xf86-input-keyboard       |
   |          | (problem from bug #192254, comment #5).                     |

   | 7798     | tweak get_config() so that it only executes one external    |
   | SpankMan | binary (sed) instead of chaining multiple ones              |

   | 7799     | fix possible information leak vulnerability when doing a    |
   | SpankMan | merge of configuration files and be better about handling   |
   |          | of whitespace in $TMP in a few places                       |

   | 7800     | s/note/not/ reported by p-y.                                |
   | zmedico  |                                                             |

   | 7801     | Bug #190179 - Use `prelink --verify filename` to write the  |
   | zmedico  | temp file via stdout since --undo fails when run as a       |
   |          | normal non-superuser because it tries to chown the output   |
   |          | file. Also, use mkstemp() to eliminate the need for locking |
   |          | the temp file. Thanks to Israel G. Lugo                     |
   |          | <israel.lugo@lugosys.com> for the initial patch.            |

   | 7802     | Initialize ${TMP} before registering the die trap so that   |
   | zmedico  | we're sure which directory die will clean up.               |

   | 7803     | Bug #74615 - Quote all file paths inside dispatch-conf      |
   | zmedico  | shell commands.                                             |

   | 7804     | Bugs #168772 and #193695 - During unmerge, only ignore      |
   | zmedico  | specific exceptions raised from unlink() and rmdir() calls. |

   | 7805     | Bug #193695 - Add support for FreeBSD chflags during        |
   | zmedico  | unmerge. This code is adapted from the code that already    |
   |          | exists in movefile() for the merge phase.                   |

   | 7806     | In movefile() FreeBSD chflags handling, use chflags instead |
   | zmedico  | of lchflags when temporarily adjusting the flags on the     |
   |          | parent directory since we want to follow any symlinks to    |
   |          | the real parent directory.                                  |

   | 7807     | Bug #193695 - Add FreeBSD chflags support for rmdir() calls |
   | zmedico  | during unmerge.                                             |

   | 7808     | Bug #192341 - Eliminate the dependency on py-freebsd by     |
   | zmedico  | implementing it's chflags() and lchflags() functions as     |
   |          | wrappers around the chflags command (which should always be |
   |          | available in any case). The functions are only called when  |
   |          | merging/unmerging files that actually have flags set so the |
   |          | performance difference should be negligible.                |

   | 7834     | Bug #192341 - When the chflags command does not exit        |
   | zmedico  | successfully, try to generate an informative error. First,  |
   |          | use stat or lstat to try and generate an ENOENT error. It   |
   |          | the path exists, verify that the chflags binary exists and  |
   |          | raise CommandNotFound if necessary. Finally, simply         |
   |          | generate an EPERM OSError with the output of the command    |
   |          | since we're not sure exactly why it failed or what the real |
   |          | errno was.                                                  |

   | 7835     | Set non-blocking mode on the pty master file descriptor     |
   | zmedico  | while the slave file descriptor is still held open since    |
   |          | otherwise the fcntl call can fail on FreeBSD (the child     |
   |          | process might have already exited and closed the slave file |
   |          | descriptor so we have to keep it open in order to avoid     |
   |          | FreeBSD potentially generating an EAGAIN exception). This   |
   |          | appoach is cleaner than triggering the exception and being  |
   |          | forced to handle it somehow.                                |

   | 7838     | Bug #192706 - Do not print a summary at the end of          |
   | zmedico  | --depclean if there is nothing to clean and --quiet is      |
   |          | enabled.                                                    |

svn path=/main/branches/prefix/; revision=7882

Remove CHOST mismatch logic since zmedico now implemented CHOST matching
during the dependency calculation phase.

svn path=/main/branches/prefix/; revision=7881

typo

svn path=/main/branches/prefix/; revision=7788

Vimdiffed with trunk to reduce differences to a minimum.

svn path=/main/branches/prefix/; revision=7787

Avoid warnings on Linux (only tested Darwin and Solaris, sigh...)

svn path=/main/branches/prefix/; revision=7725

Implement QA check for install_names (libraries linked to, and their
location) on Darwin, such that we can detect upfront if something is
going to error out during runtime. Try to correct invalid install_names
if they are in the image, which can be a result of gen_usr_ldscript
library movements and breaks any tool shipped with that library itself,
e.g. libiconv's `iconv` utility.

svn path=/main/branches/prefix/; revision=7724

<zmedico> grobian: in python, there are built-in constants True and False
(must be capitalized). you wanted to use True in r7721.

svn path=/main/branches/prefix/; revision=7723

Quote, such that python doesn't bail out

svn path=/main/branches/prefix/; revision=7721

It looks nicer if we just say

>>> Emerging (1 of 1) sys-devel/autoconf-wrapper-4-r3 to /
>>> Extracting info
!!! Incompatible binary package: made for x86_64-pc-linux-gnu, you are
on i386-pc-solaris2.10

instead of some backtrace because formatter arguments do not match the
expected number.

svn path=/main/branches/prefix/; revision=7717

Apparently it was a bit too late yesterday. I meant to add EPREFIX, not
EAPI.

svn path=/main/branches/prefix/; revision=7715

Add EPREFIX as env setting, such that we can retrieve it as file from
the binary package. If it's absent, abort mission. Drop EAPI check, as
that should be dealt with in other code already. (But having an EPREFIX
file implicitly says we have EAPI=prefix anyway...)

svn path=/main/branches/prefix/; revision=7708

A first shot at binary packages support for prefix.  In itself, binary
packages work fine of course, but once you want to share the binary
package between users with different prefixes (like from a binhost),
then you need to cope with that.  After some testing chpathtool appears
to be able to successfully change paths encoded in binaries, in order to
adjust to the proper prefix.  For a binhost setting, binary packages
need to have an artificially long and annoying prefix to make it work
the most people.

svn path=/main/branches/prefix/; revision=7706

Don't remove files which the ebuild lateron tries to install

svn path=/main/branches/prefix/; revision=7703

   Merged from trunk 7646:7695

   | 7647      | Fix ACCEPT_KEYWORDS validation so that ** is valid.        |
   | zmedico   |                                                            |

   | 7651      | Just use os.listdir() since portage.listdir() is           |
   | zmedico   | unnecessary.                                               |

   | 7652      | Try harder to figure out what OS we are running            |
   | WarnerBro |                                                            |

   | 7653      | Bug #189743 - Add .jpeg to the list of extensions          |
   | zmedico   | supported by dohtml.                                       |

   | 7655      | Show cache miss/hit counts all on one line, using \r to    |
   | zmedico   | return to the beginning of he line and rewrite it each     |
   |           | time that a counter is updated. Thanks to Mike "Fuzzy"     |
   |           | Partin <fuzzy@smoke.dope.org> for this patch (submitted on |
   |           | the gentoo-portage-dev mailing list).                      |

   | 7656      | Send cache hit/miss status updates to stdout instead of    |
   | zmedico   | stderr and add some more flush() calls.                    |

   | 7659      | Make --info detect more /etc/*-release files as suggested  |
   | zmedico   | by grobian.                                                |

   | 7661      | Bug #188703 - Don't adjust permissions in ${T} unless      |
   | zmedico   | userpriv is enabled.                                       |

   | 7663      | Pass complete package metadata from depgraph.select_dep()  |
   | zmedico   | into create() in order to minimize aux_get calls.          |

   | 7664      | Make best() return early when it's only given one          |
   | zmedico   | packages.                                                  |

   | 7665      | Fix update_dbentry() to process version components         |
   | zmedico   | properly before passing them into ververify().             |

   | 7666      | Make depgraph.select_dep() reuse cached metadata from      |
   | zmedico   | nodes that have already been added to the graph.           |

   | 7671      | Skip --newuse checks for nodes that have already been      |
   | zmedico   | added to the graph as "merge" nodes.                       |

   | 7672      | Prevent output from being flushed to the console too       |
   | zmedico   | frequently in dir_get_metadata().                          |

   | 7674      | Use INFORM to colorize the package name.                   |
   | zmedico   |                                                            |

   | 7676      | Fix a typo from r7663.                                     |
   | zmedico   |                                                            |

   | 7678      | Bug #189791 - Send errors to /dev/null when debug-print()  |
   | zmedico   | fails to write to ${T}/eclass-debug.log.                   |

   | 7680      | Make depgraph.create() avoid metadata lookups for binary   |
   | zmedico   | packages and ebuilds in cases where an installed package   |
   |           | has already been added to the graph. This greatly improves |
   |           | performance when the graph contains a large number of      |
   |           | installed packages.                                        |

   | 7682      | In config.regenerate(), skip loading /etc/profile.env if   |
   | zmedico   | it's mtime hasn't changed.                                 |

   | 7684      | Bug #189791 - Define EBUILD_PHASE=unpack during the        |
   | zmedico   | nofetch phase since otherwise we get EBUILD_PHASE=merge    |
   |           | which isn't in our list of valid EBUILD_PHASES recognized  |
   |           | by elog.                                                   |

   | 7686      | Make depgraph.select_dep() node reuse work when in         |
   | zmedico   | --usepkgonly mode.                                         |

   | 7688      | Add * and ~* to the list of valid values for               |
   | zmedico   | ACCEPT_KEYWORDS.                                           |

   | 7690      | Fix a typo.                                                |
   | zmedico   |                                                            |

   | 7691      | Fix another typo.                                          |
   | zmedico   |                                                            |

   | 7692      | Use a config.reload() method to explicitly reload          |
   | zmedico   | /etc/profile.env when setting up the ebuild environment.   |

   | 7693      | Call config.regenerate() after config.reload() so that the |
   | zmedico   | incrementals are restacked.                                |

   | 7694      | Don't cache results from match_from_list() since           |
   | zmedico   | *dbapi.match() caches do the job.                          |

   | 7695      | Remove pointless information from --info output            |
   | genone    |                                                            |

svn path=/main/branches/prefix/; revision=7698

Fix up svnlogmsg.awk such that it generates only the log entries for the
revisions that svn merge merged. Bleh.

svn path=/main/branches/prefix/; revision=7697