git.tremily.us Git - portage.git/log

Use an elog file /inside/ the prefix. It would have been better to use a variable for this, such that admins/users can change this location. Thanks DirkT for pointing out the prefix issue.

svn path=/main/branches/prefix/; revision=8396

Don't backtrace if EPREFIX is not in the metadata set.

svn path=/main/branches/prefix/; revision=8389

   Merged from trunk 8340:8355

   | 8341    | Implement a "consistent" depgraph parameter (enabled by      |
   | zmedico | --consistent) that can be used ensure that installation of   |
   |         | new packages does not break any deep dependencies of         |
   |         | required sets (args, system, or world). Unfortunately, the   |
   |         | performance penalty for small dep calculations is too great  |
   |         | to enable this parameter by default. At least it will be     |
   |         | useful for testing backtracking behavior when that is        |
   |         | implemented.                                                 |

   | 8342    | Optimize xmatch "bestmatch-visible" to do fewer metadata     |
   | zmedico | accesses by using the same code as "minimum-visible" but     |
   |         | with a reverse iterator.                                     |

   | 8343    | Implement license filtering for xmatch minimum-visible and   |
   | zmedico | bestmatch-visible. Also, make the gvisible license filtering |
   |         | conditional on config.local_config since repoman doesn't do  |
   |         | license filtering.                                           |

   | 8344    | Fix "args" set handling wrt $ROOT in                         |
   | zmedico | depgraph._complete_graph().                                  |

   | 8345    | Remove a few unused depgraph attributes.                     |
   | zmedico |                                                              |

   | 8346    | Gather some ignored dependencies so that they can be         |
   | zmedico | properly processed by the depgraph when "conistent" mode is  |
   |         | enabled.                                                     |

   | 8347    | Defer selection of package dependency atoms until they are   |
   | zmedico | actually needed since the appropriate atom selection         |
   |         | behavior can change between the time that the package is     |
   |         | initially added to the graph and when it's dependencies are  |
   |         | traversed (like when --consistent is enabled).               |

   | 8348    | Update the FEATURES=mirror docs to more accurately reflect   |
   | zmedico | behavior.                                                    |

   | 8349    | Fix diefunc() so that it doesn't report that the ebuild is   |
   | zmedico | from an overlay when EMERGE_FROM == binary.                  |

   | 8350    | Make depgraph.select_files() recursively expand sets given   |
   | zmedico | as arguments so that containment tests in _get_parent_sets() |
   |         | properly match atoms in nested sets (like if world contains  |
   |         | system). Otherwise, atoms from nested sets would get         |
   |         | recorded in the world file.                                  |

   | 8351    | Add a check for redundant cd "${S}" statements on the first  |
   | zmedico | line of src_(compile|install|test) ebuild methods. Thanks to |
   |         | Petteri Räty <betelgeuse@gentoo.org> for this patch.        |

   | 8352    | Avoid making unnecessary copies of PackageSet._atoms by      |
   | zmedico | replacing calls to self.getAtoms() with self._load().        |

   | 8353    | Make the EbuildUselessCdS check for both quoted and unquoted |
   | zmedico | ${S} so the user doesn't have to fix quoting before this     |
   |         | check will recognize the violation.                          |

   | 8354    | Remove an extra \$ from the EbuildQuote.var_reference regex  |
   | zmedico | so that it will properly match things like variable          |
   |         | references without braces, like $S.                          |

   | 8355    | Properly escape { and } characters in regular expressions    |
   | zmedico | even though it seems to work either way.                     |

svn path=/main/branches/prefix/; revision=8356

Darwin7 doesn't have lchown implementation. We only need it for links,
which on Darwin don't have an owner, so only try that when lchown is
available.

svn path=/main/branches/prefix/; revision=8339

Apply 'disable chflags when apparently absent on BSD'-patch from zmedico on gentoo-alt ML. Cause not yet found.

svn path=/main/branches/prefix/; revision=8330

At least my grep doesn't like :digit:, neither do I

svn path=/main/branches/prefix/; revision=8327

Only run prefix QA-checks if there is a prefix, to avoid false
positives.

svn path=/main/branches/prefix/; revision=8326

Since path.normpath("") = ".", avoid doing this, such that EPREFIX
remains empty when it should be, instead of "." which means something
entirely different.

svn path=/main/branches/prefix/; revision=8325

Not sure what idiot put bash [[ in configure.in, but it probably was me.

svn path=/main/branches/prefix/; revision=8323

Add --with-eapi to be used by prefix for setting it to "prefix",
defaulting to 1, the current value the trunk uses.

svn path=/main/branches/prefix/; revision=8322

Drop ARCH pseudo-check, its result is never used (so it seems). Default offset-prefix (EPREFIX) to an empty string, as that should be it for non-prefix

svn path=/main/branches/prefix/; revision=8320

Show the double prefix, as it is sort of confusing to see just one and
an error that it is double.

svn path=/main/branches/prefix/; revision=8311

Fix bug detected by mattmatteh in #gentoo-alt, the prefix version of
doins is missing the isolated-functions.sh include. This prevents
dieing on a missing vecho, instead of the real error message.

svn path=/main/branches/prefix/; revision=8297

FIX: indentation problem, also end the Portage identification line with a ) if repoman wasn't forced to do its job. Should probably be back-propagated to the trunk.

svn path=/main/branches/prefix/; revision=8281

Fix: Make repoman actually USE -m commit message again (and -M commit message file). This should probably be back propagated to the trunk as well.

svn path=/main/branches/prefix/; revision=8280

reduce diff with trunk

svn path=/main/branches/prefix/; revision=8279

python says: bin_blobs is not defined, it is right as this wasn't dealt with in the SVN case

svn path=/main/branches/prefix/; revision=8278

python says: myoptions is not defined

svn path=/main/branches/prefix/; revision=8277

It may be nice to have prefix around if the default datadir is defined on top of it.

svn path=/main/branches/prefix/; revision=8276

... and make it also compiling again on Solaris

svn path=/main/branches/prefix/; revision=8228

Patch from haubi to also compile on HPUX/ia64

svn path=/main/branches/prefix/; revision=8227

Allow to override EPREFIX, basically for the purpose of "cloning" a
prefix install, or to facilitate a cross-compilation environment.

svn path=/main/branches/prefix/; revision=8216

   Merged from trunk 8175:8186

   | 8176    | Use the python version of eerror                             |
   | genone  |                                                              |

   | 8177    | The ERROR color code is currently undefined, so make eerror  |
   | zmedico | use BAD like the bash version does.                          |

   | 8178    | Pass the whole cpv to elog instead of just ${PF}.            |
   | zmedico |                                                              |

   | 8179    | Bug #196427 - Don't display news notifications when in       |
   | zmedico | --pretend mode.                                              |

   | 8180    | Don't show each character of the log message on a new line   |
   | zmedico | when displaying messages that came from one of the           |
   |         | python-based elog functions. This might not be the correct   |
   |         | solution but it seems to work for now.                       |

   | 8181    | Fix broken call to renamed _combine_logentries().            |
   | zmedico |                                                              |

   | 8182    | Prevent _combine_logentries() from generating redundant      |
   | zmedico | consecutive 'TYPE: phase' lines that show in summary.log     |
   |         | when the python-based elog functions are used.               |

   | 8183    | Use a list to buffer strings in _combine_logentries() and do |
   | zmedico | a single concatenation at the end for better efficiency.     |

   | 8184    | Refactor _merge_logentries() to make it a little more        |
   | zmedico | efficient.                                                   |

   | 8185    | Bug #196435 - Add some more references to quickpkg(1) since  |
   | zmedico | sometimes people don't realize that it exists.               |

   | 8186    | Remove the config.setinst() call from depgraph.select_dep()  |
   | zmedico | since it's never really guaranteed to work as intended. It's |
   |         | supposed to help ensure that the correct old-style virtual   |
   |         | is preferred but it will often fail to do so, making it      |
   |         | necessary for the user to manually force the preference.     |
   |         | Proper backtracking (bug #1343) will solve the problem more  |
   |         | reliably.                                                    |

svn path=/main/branches/prefix/; revision=8211

   Merged from trunk 8150:8174

   | 8151    | In dblink.getcontents(), use a regular expression to detect  |
   | zmedico | when path normalization is required. Also, only join with    |
   |         | ${ROOT} when necessary. This allows unnecessary normpath and |
   |         | join calls to be optimized away in the general case,         |
   |         | reducing the cpu time for `equery belongs ` by about 50%. M  |
   |         | pym/portage/dbapi/vartree.py                                 |

   | 8152    | Only re.compile() the normalize_needed pattern once rather   |
   | zmedico | than for each dblink constructor call.                       |

   | 8153    | Optimize dblink.isowner() to use fewer stat calls by only    |
   | zmedico | collecting stat results for parent directories. This         |
   |         | provides equivalent accuracy to the previous approach but    |
   |         | will perform much better when used to scan all installed     |
   |         | packages for owners in the event of a file collision.        |

   | 8154    | Bug #196043 - Implement a `portageq owners []+` command that |
   | zmedico | is suitable for identifying all packages that own one or     |
   |         | more files when a file collision has occurred. This uses     |
   |         | dblink.isowner() so that the query works properly even when  |
   |         | paths are ambiguous due to symlinked directories.            |

   | 8155    | Bug #196043 - Update the file collision ewarn notice to try  |
   | zmedico | and clarify the cases when a bug should NOT be filed. Also,  |
   |         | recommend the new `portageq owners / ` command since it      |
   |         | works properly even when paths are ambiguous due to          |
   |         | symlinked directories.                                       |

   | 8161    | Add missing "to" to fix grammer.                             |
   | zmedico |                                                              |

   | 8163    | Bug #196043 - Unify the ouput handling for file collisions   |
   | zmedico | so that similar eerror messages are generated whether or not |
   |         | collision-protect is enabled.                                |

   | 8166    | Fix the normalize_needed regex to properly match // anywhere |
   | zmedico | in the path. Also add support for detection of . or .. where |
   |         | appropriate.                                                 |

   | 8168    | Fix collision-protect so that it properly cancels the        |
   | zmedico | preinst phase like it used to.                               |

   | 8170    | Adjust quote usage in collision-protect eerror output.       |
   | zmedico |                                                              |

   | 8172    | Bug #195375 - Make dblink.treewalk() read inforoot/SLOT      |
   | zmedico | since it differs from the expected SLOT value when when      |
   |         | USE=multislot is enabled. A warning message will be shown if |
   |         | the slot differs and --quiet mode is not enabled.            |

   | 8174    | Handle EnvironmentError instead of OSError since open()      |
   | zmedico | actually raises IOError. Also, treat a missing SLOT file as  |
   |         | SLOT="" since it is currently possible to install an ebuild  |
   |         | with an undefined SLOT even though repoman generates a       |
   |         | SLOT.missing error with such an ebuild.                      |

svn path=/main/branches/prefix/; revision=8210

Replay the move from revision 8142, because svn does not properly do it.

svn path=/main/branches/prefix/; revision=8205

Show that we are checking things, and add check for S_ISWHT to allow for compilation on Linux

svn path=/main/branches/prefix/; revision=8127

I missed a D.

svn path=/main/branches/prefix/; revision=8123

   Merged from trunk 8113:8121

   | 8114    | In the file collision eerror output, don't colorize the file |
   | zmedico | paths since the escape codes look ugly in the log.           |

   | 8115    | Remove unused import.                                        |
   | zmedico |                                                              |

   | 8117    | Avoid an error message from find when "${D}"/usr/share does  |
   | zmedico | not exist.                                                   |

   | 8119    | In some cases, openpty can be slow when it fails. Therefore, |
   | zmedico | stop trying to use it after the first failure.               |

   | 8121    | Remove the checks for files in symlinked directories from    |
   | zmedico | the collision protect code since it hasn't been needed ever  |
   |         | since the followSymlinks parameter was disabled for          |
   |         | portage.listdir() calls in order to prevent infinite         |
   |         | recursion loops.                                             |

svn path=/main/branches/prefix/; revision=8122

Greatly speed-up creating a tarball by omitting .svn directories during
copying.

svn path=/main/branches/prefix/; revision=8113

Solaris is slightly different, use configure to find out what we need.
We compile on Darwin, Solaris and FreeBSD now. Probably Linux breaks.

svn path=/main/branches/prefix/; revision=8112

Make FreeBSD happy, and fix inverted guard.

svn path=/main/branches/prefix/; revision=8111

It helps a lot when you merge the actual "fixed" files by chpathtool
instead of those in the temporary unpack location.

svn path=/main/branches/prefix/; revision=8110

Suppress chpathtool's warnings with -q

svn path=/main/branches/prefix/; revision=8109

small but essential : forgotten

svn path=/main/branches/prefix/; revision=8108

my autojungle knowledge sucks, fix complaints by autoconf

svn path=/main/branches/prefix/; revision=8107

   Merged from trunk 8085:8102

   | 8086    | Bug #195527 - Unconditionally detect file collisions and log |
   | zmedico | them as eerror messages via elog. This will allow us to      |
   |         | collect more file collision data but it won't be quite as    |
   |         | annoying as enabling collision-protect by default would be.  |

   | 8087    | Bug #195527 - Add some more information to the file          |
   | zmedico | collision eerror message to try and prevent user confusion:  |
   |         | - Hint that `equery belongs ` can be used to find the        |
   |         | installed package that owns a file. - Advise then NOT to     |
   |         | file a bug without reporting exactly which two packages      |
   |         | install the same file(s).                                    |

   | 8089    | s:this package wants:this package will:                      |
   | zmedico |                                                              |

   | 8091    | Remove a redundant call to elog_process().                   |
   | zmedico |                                                              |

   | 8093    | Bug #195370 - Filter some more bogus matches due to          |
   | zmedico | old-style virtuals.                                          |

   | 8096    | In dblink.treewalk(), use os.walk() instead of               |
   | zmedico | portage.listdir() in order to avoid cacheddir() bloat when   |
   |         | listing the files to be merged from ${D}.                    |

   | 8097    | Use os.listdir() instead of portage.listdir() in             |
   | zmedico | dblink.mergeme().                                            |

   | 8098    | Remove a chdir() call that's no longer needed for the        |
   | zmedico | collision-protect symlink code.                              |

   | 8100    | Make the file collision eerror message less verbose when in  |
   | zmedico | --quiet mode.                                                |

   | 8102    | Handle the PortageException that can be raised from          |
   | zmedico | portage.mail.send_mail().                                    |

svn path=/main/branches/prefix/; revision=8106

Use the new chpathtool.

If we install on a system with a different prefix, unpack in the
workdir, instead of the image dir.  We "copy" from the workdir to the
image using chpathtool, which behaves as a cp -a.

chpathtool was changed to copy file by file, changing paths it finds in
files to overcome the following problem.  chpathtool was used in a piped
fashion, like this:

bzip2 -d file | chpathtool | tar -x

in this way, chpathtool operated on the raw tar-stream, changing paths
it saw over the stream.  This has the following advantages:
- not only rpaths, library locations, or hardcoded paths to conf files
  were changed, but also the location of the files in the filesystem
  themselves, as chpathtool also changed the tar envelope
- just one run over the stream, simple, easy and cheap from an fork/exec
  perspective
- no need to deal with file attributes, creation modes, etc, tar dealt
  with that, chpathtool only changed paths where appropriate

However, when doing the path changements, chpathtool inserts padding
bytes at the end of each string it sees, in order not to break offsets
stored in e.g. programs to point in the TEXT or DATA spaces.  Because
text files are in the tar stream, chpathtool sees the end of string at
the end of such text file, and inserts the padding null-bytes there.
However, tar still has an administration for each file of its size, so
as result, tar writes the padding null-bytes to the text files.  In most
cases this doesn't hurt, however, some applications, such as GHC get
confused by it, because EOF isn't found, but null-bytes don't make sense
for them.

The only way to fix this, without interpreting the tar envelope, is to
use chpathtool per file.  chpathtool doesn't write padding bytes if it
doesn't find an end of string, which in textfiles doesn't exist (instead
you get the EOF).  Running find -exec, or with xargs results in a
serious performance problem due to numerous fork/exec calls.  Instead,
chpathtool was changed to recursively walk directories, and process all
what is in there.

Because chpathtool operates on files in this case, it needs to properly
behave, such that it doesn't change the properties of each file it
replicates.  For this reason, chpathtool's implementation grew twice its
original size in order to retain the original file's permissions,
owners, and times.

svn path=/main/branches/prefix/; revision=8105

Retain access and modification times for files and directories.

svn path=/main/branches/prefix/; revision=8104

Intermediate commit.

Finished stage1 of chpathtool pimp-up.

The idea is that chpathtool copies a directory into another, doing its
job, retaining the files' properties, like cp -a (ok, cp -pPR) would do.
The implementation is now up to copying, setting the permission bits and
owner stuff. TODO: the *times, and then it should be done.

svn path=/main/branches/prefix/; revision=8095

send warnings to stdout instead of stderr

svn path=/main/branches/prefix/; revision=8085

Portage and quickpkg generate slightly different tarballs (the former
makes paths like ./usr/bin/bla whereas the latter makes paths like
usr/bin/bla), hack Portage such that it can deal with its own format as
well. (quickpkg format used to work before)

svn path=/main/branches/prefix/; revision=8084

Use PORTAGE_BINHOST as repo_path(_real) such that instead of a ? for
repository, we show it's url to the binhost in use.

svn path=/main/branches/prefix/; revision=8083

I have some rotten binpkgs floating around, they don't have a EPREFIX
key, avoid Python KeyErroring out on them.

svn path=/main/branches/prefix/; revision=8082

Solve bug where portage would not "see" my binhost because
PORTAGE_BINHOST didn't end with a /. This is actually caused by urljoin
not operating like os.path.join would do.

svn path=/main/branches/prefix/; revision=8081

Optimise some more: take the EAPI from portage.const, as most packages
will probably be that EAPI (at least that is what we would like). At
least in Prefix there are no packages with EAPI != portage.const.EAPI

svn path=/main/branches/prefix/; revision=8080

With the help of zmedico Prefix binary support should be working fully optimal and correct now

svn path=/main/branches/prefix/; revision=8079

Fix syntax error

svn path=/main/branches/prefix/; revision=8078

Resolve merge error.

svn path=/main/branches/prefix/; revision=8027

Fix up installing of sets.conf

svn path=/main/branches/prefix/; revision=8026

Also create the target directory

svn path=/main/branches/prefix/; revision=8024

It helps a lot if you define a variable you use lateron

svn path=/main/branches/prefix/; revision=8022

Install sets.conf in datarootdir/portage.

svn path=/main/branches/prefix/; revision=8020

Look /in/ the prefix

svn path=/main/branches/prefix/; revision=8006

Don't spit out ${D}

svn path=/main/branches/prefix/; revision=8005

Vimdiff with trunk to make python happy

svn path=/main/branches/prefix/; revision=7964

   Merged from trunk 7903:7908

   | 7904     | In the EbuildQuote check, combine the var_assignment regex  |
   | zmedico  | together with the ignore_line regex. This also fixes an     |
   |          | issue with the var_assignment regex allowing violations     |
   |          | like `make DESTDIR=${D}` to slip through.                   |

   | 7905     | Eliminate confusing false positive error messages for       |
   | zmedico  | SRC_URI.syntax and digestentry.unused that are reported     |
   |          | when the SRC_URI for one or more ebuilds can't be parsed    |
   |          | for some reason. There's no point in producing a false      |
   |          | error here since the root cause will produce a valid error  |
   |          | elsewhere, such as "SRC_URI.syntax" or "ebuild.sytax".      |
   |          | Also, update the docs for the "ebuild.syntax" error to      |
   |          | indicate that a digest verification failure can trigger it. |

   | 7907     | this isnt part of gentoolkit anymore                        |
   | SpankMan |                                                             |

   | 7908     | no need to use "function" when defining a function          |
   | SpankMan |                                                             |

svn path=/main/branches/prefix/; revision=7953

1 tab -> 4 spaces.

Mixing those upsets python. It appears this file is using spaces
instead of tabs, i.e. it is not consistent with the other python files
which use tabs.

svn path=/main/branches/prefix/; revision=7903

Align with zmedico

svn path=/main/branches/prefix/; revision=7889

- only use PORTAGE_TMPDIR /after/ it is set
- don't chown ${TMP} to what in theory should be our own, especially
since GID isn't set.

svn path=/main/branches/prefix/; revision=7888

Portage generates ED (and D) with a trailing /, this means that at least
internally we can do things right and avoid double slashes. This solves
at least gtk+-2.12.0 compilation which uses einstall. libtool isn't
charmed by the double slashes.

svn path=/main/branches/prefix/; revision=7886

Moved EPREFIX check from late-die when installing a binary package to
resolving phase, like the CHOST check.

svn path=/main/branches/prefix/; revision=7885