# ChangeLog for net-nds/openldap
# Copyright 1999-2015 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/net-nds/openldap/ChangeLog,v 1.489 2015/03/03 09:39:25 dlan Exp $
+# $Header: /var/cvsroot/gentoo-x86/net-nds/openldap/ChangeLog,v 1.490 2015/03/07 23:16:57 robbat2 Exp $
+
+ 07 Mar 2015; Robin H. Johnson <robbat2@gentoo.org> -openldap-2.4.35.ebuild,
+ -openldap-2.4.38-r1.ebuild:
+ Clean up some old ebuilds, but still newer than the package.mask.
03 Mar 2015; Yixun Lan <dlan@gentoo.org> openldap-2.4.40-r3.ebuild:
add arm64 support, tested on A53 board
------BEGIN PGP SIGNED MESSAGE-----
-Hash: SHA256
-
AUX DB_CONFIG.fast.example 746 SHA256 69fc9aa6e4f0b888bc02d3f75642fe1ebf9345c685257a5c1236b2e79ed56e0b SHA512 07199416b7c91864a1dd5ad45642367c4f79ee8b694214305289c47afb5b53420f0fb81cf7c8b117400c903535e88a2dd47bda28d57e969aeeec669debf6dc9e WHIRLPOOL 1d6a2adcdbbac2698d8d5ab1867ecfafee23c8561c34addaea30f59bde8b4bfad88c576ffd7df102aa428c2588ed3b9376de49606eb6608c8e873f8119326c5a
AUX openldap-2.2.14-perlthreadsfix.patch 614 SHA256 bb719cc1fed47ff0f111c960f3295781ae6f0d9e98b4266a87751044b4bb3175 SHA512 e2579de72194c63e445108a39a85635622c1a629cec9d276df84ce9d770dbe7e2df2057663bac192558af3dee60fa2f0ae92f4cc34145c300fe141ae7f3f13b3 WHIRLPOOL 24cab36ff0368f81f555ba0fa0ea0f78d245d1863bf4c6c6d291536b16bdbe628a9a204ffccce12a6014b71717f3dd722c9f95061c1a519e273c0535316ad97d
AUX openldap-2.2.6-ntlm.patch 5011 SHA256 1f7e766bcafb412ec336aad7e07295d6d62d2e2a62b6804b07b06a5056102243 SHA512 8140dba85c56f269c953b0b23b2ca7eecb42f8e5167f4d0f08511dc8c06c30bcb42c3e38ed3b77d5622780a94c0aa9eb65bb8e45af50075acab97e7f466a1a9d WHIRLPOOL 75c2394c46242f738b5ee0db8473b05b5e7e75821e89dcea3ca7a139e34cc61f5848d0601dc66499dad35beefdd02aed5486ed138cfd8e216041aa5ceb85c920
EBUILD openldap-2.4.28-r1.ebuild 22002 SHA256 9980b9e7df99c662074dbc0aaaa4ab4daab6e0de7bec1492529526a39bdcc013 SHA512 0e6cf1678c90fdc3ece660af52228fefb03534978682ddef9304400863f815489799f0e9253f0a2788c4da9dd5c9e635fcf2d120d788488acdc6f34e74121bdb WHIRLPOOL dbb0087d8fd713c27314ecdb8a8a0584f8bba73c93cf9e98b42a8a2c66341228c55c4694997123abb9244664ba6c9763caff8a169730874c08b5c7cb23037a7d
EBUILD openldap-2.4.30.ebuild 22020 SHA256 5742f38c245d0185c7feec8fd47ddbc40dfbe7ee88c36d16bd8984355c92e038 SHA512 52ec9c2a1fce93589314456de2c55bdab098d3327014d85cca55e83f86c59a183fd854493c4306d5ea32d7de9c2b78dac15ab44b3ce60eb193a99ae2961a29d2 WHIRLPOOL 8be58832c9c0c78381e168fee2fa67bedbdbf990c142c5784ce2adc02a864c1c4020a93d072bd2ab98b56f2782c5741f79a69543fe4cce18a2323fd9d9d7d476
EBUILD openldap-2.4.35-r1.ebuild 22450 SHA256 6987728b036ceef21a0e0a1cb989bdb16649c74d4b4484b605282b8760aa4024 SHA512 c96e2dc7a71166b6c831e99139546dd9dee2e75c2a4a5a932a99d0db4fe407c155ce0b97b5793297995932fbce64210fd76a78e5190db9055866868b926b0cd7 WHIRLPOOL 208f161090d1cff405fa58842b9818a67f44afa6c41f5a4197eb113bf4e63ccc21d726af7c7ea1b4844702ecd6c68e9da2833b3a37bcba4d0bd38be958204853
-EBUILD openldap-2.4.35.ebuild 22183 SHA256 c85606e0e461306d3da36f2ebacffea27edfd6152d428325480e4e6146fd1bfb SHA512 7f1eb861be44a5094bd1a1f4530ca382033ea76903e694665889ff3d9475dba856de08d583f5388375bd962f45288471c034c1f3f9a3fc0685a740665ce7ce80 WHIRLPOOL 4d9298bbe5c4db6b17f1fa366c1922383400a25db44241dc8ff6cde17f4cb2e55ee881e6f72533a1e541af51a66df34a103358bd4a8b5d03848ffb95d6827f19
-EBUILD openldap-2.4.38-r1.ebuild 22526 SHA256 82c788d06106e4e5dad38f900469e077db5ffcd514628adaa106b11a801aa174 SHA512 0847b7fd3d9c473501e08fe3af0562476eb2325c4749c2f7f7ae63f55d0c8aa940d2ca1e3667ff45bafcabe32a23175bf9e99a37b5fad1f2c612c42e20d54b1d WHIRLPOOL 735b128508f135849fea5c9c4310c2faed5e612b8b662f3f44ff89d05d87edf68a86d4c00c22470e6d634876b910e629b741ee9c8d8f3607bc77a565f7f77deb
EBUILD openldap-2.4.38-r2.ebuild 24008 SHA256 69069ef4ec0cc311c3513b1487daa53deee6687a4e5679b165da02404af9aa6f SHA512 b762789712f266887672f6c36ef1b95654d0681855958c76a1200d564d625dfd76161d5dd8f5b7b1992d1c2729b70e23398530d672af463282715ba0166eb6ce WHIRLPOOL b94656976e6f30a451512dc3904c33bd39f0647b903f5a926e1e1a14b059cc5a26123491bd28cb064145c8fa68c78cebe292facbfe114e81e64f30249b628ecc
EBUILD openldap-2.4.39.ebuild 24012 SHA256 7097370f065bd4e6001be5b1e91aabca01702a2fb8a4178c41cf2664766cb7c9 SHA512 cf0d1fa9ec9bcd17891b657c81a79d116c2d05a1a6681771e70ee1242dfbb078a52ea65d2797b9460d28e1e9e381d9f7e6555bffbb05f10ac7e0110bb9e9bb31 WHIRLPOOL e935d519625bb5aaf73b6cfdbb88814680a01100e6ad850f2a01af6e79e0bdfc02e6fe4ce125e897eeabb2760042d36b250cecdbf0f11abe563b4ae61bb57fd4
EBUILD openldap-2.4.40-r2.ebuild 26227 SHA256 2fac256a6c93c5098ddf67f18bd9a8cb71a706d0fb8fe7e78aa0dda257550628 SHA512 b2d6f3320749ebd91c8a62834d87dac4f7840d6aae8d3ed698108fc2e7a42f9d83043ef8bc8892031e96208377d763a4010321ce0469a36d76e4338a43f0107d WHIRLPOOL 333ab08c7a2a0345d221156bdf7bfd9ea88bad942b0d66ed21652ac0dbfd628904ec62f5a2f7bd1dcc83f6dee0563d8b69a79db4890966b654cfc74eb9ad704e
EBUILD openldap-2.4.40-r3.ebuild 26233 SHA256 85868ef21a22a604537f419f8044966d9f30299c58e11411d81152342a791801 SHA512 4420594ab4483046a997e30f1b7cefc1a3ec38dec0183f941af83a6f255b2d55a015e89c90fbc3a4bf46e113d2a94fe34a35db9de6be57d690ab9c0e1256468a WHIRLPOOL 0e5c7fcce630bb4bd5dfc0e774a53de5cdebe4d34fd541f05707786ef3e932aaab9d584f93ba3815cf77ac83c56187a8e8440dfb42b5636ce7c692c4f0a3e5ad
EBUILD openldap-2.4.40.ebuild 26665 SHA256 de9e846d0c1576dceb0fb8fb26123a4ba7078786a425d2af76ea4b9efedae7f2 SHA512 e52158c029504321199c5dc495c2f88d00d298fc19eda768cb3895d5d1f5e5afdfb8e21cfe55e322ca646c4d5125b8340ae03b7ff7147effe7e4d38a82f29d67 WHIRLPOOL 9a060d2ea77c2ca4587d481b47938a57e30c2027d831ee615f3e1fddc324f59d0b1dfc38b7bba762f8417ddf728f6a79397c4ad74c8d1d4e15feca63dab39232
-MISC ChangeLog 86332 SHA256 eb8572b3167db454afa53bba6efc5dc17068fb7c79d4d63b295018b2f0068373 SHA512 a395c98ec8ab5f7b148b1d7283bdf3db3a70655081c8aaf8b202cd7e65ad6a46f8b5167813d7c2b0fcd212f2b16c594656609372b9730c296415ce5959221323 WHIRLPOOL 58cea77edfac4981928a3be166b03c2b5f08ee71f0d255d17853d0770e42919da9000f204437458e6b3ca7f684f0583778b8579bbbc8921c5c99e2891f50d1da
+MISC ChangeLog 86512 SHA256 21f2418377fe1fd0e9eb49aa2fe2399fb110a5d19aedcfc9b2edfc581a742ba5 SHA512 33f0261b658e989eba8ce956dc0990a3525a00e6655a6f2bab111e0fb3d56e0d9f7029ab11a70497e907299bf2d388d21d9c444e18ad9740dc6bc7799454001b WHIRLPOOL 85b8f0bab10039f5c3d748b483cad96d5d8937a828d1bc2ff41cd818b4a413c86d5a48e3b978bd66710e7c722eb8e4d592060526622345823651b2c41064d018
MISC metadata.xml 664 SHA256 70c2b3ca29517c6cafffef5802fcd6a513517d320a118bf2205b0033ffa384ea SHA512 55e576a18ae7c71f3fa413b252a40945059d9f9308f4036739124bd241cc6c409816124c7e4fd30df965963d93907bce03ee117489fdb3443e62bf00dac9da25 WHIRLPOOL ce3c30df03e9026415bd72d5f3c132bb3273a597a6ca8e8928957baae1b4bc6d80ab8f7f0698d72cd8d5773a957ee2a929d3c2bdd4f5a6cd6ba88f9b9e0aa4c7
------BEGIN PGP SIGNATURE-----
-Version: GnuPG v2
-
-iQIcBAEBCAAGBQJU9RB+AAoJEJIMDbyqvv1VJCQP/jG2GtjyCXvIvfpdX2b6DY+T
-zhVdgkhrVqx4LQYBMLh8EBPwd+VTahFu7Mn1y4Wc7VRXGWav4mFm6NqSimeSWROx
-5VMbQ1YPpq4/zEJdoDG1bHG/VA+41HJ4Pc4dA29VEqulXtqr7y8tgOWtrsPOsBBr
-ztuAnxy3wMQN/qfVannkGV1TdmtwPpzkQLe/wgO/d21ApZfhBReVX5gtFtBd6hcV
-5ifmMDeoGuTkJIVZH9r0pG3sO2qea9YUJvfXiNq3XYmX7Mn2h8HcbrlR4d0LwC6N
-SNMkwESw+yT2OYE94mCnZRmDiT42F1G0TaA3LTQsnvC/6XmKNajH3wjcJnVhjDpy
-45D4FJUbU0mGfkvbmTmGSNEDJdmlVJuQdj2oBCpUsyY7N4o3dKFeC5065TyBrZ5s
-StVxc2RVadTyqv5cXeVj7/O7jmUGLzYCGJ6IfLDLPD3Jqs06JEI2ubvsvUREp88R
-jiy64bE+KLJsBSvpuPPs85vrgw7FGVaAhPkbcJh7+RIxRi7AmVtDJPaJ58oD+VC4
-W1W2AcdnXe9F+6+Bn58/LOJk9vqCRPvn9plZxtyeKxDVEKzidpDjUPifnbdX3JiB
-OamAWPKivxo11Fa0rSeAY+Fcg+i/HR8NhaYGb9lyYOE1MmUb/c846/QSLA7AMZ6K
-nb6Vjhjrmo+2d97NF6y+
-=WnmO
------END PGP SIGNATURE-----
+++ /dev/null
-# Copyright 1999-2014 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-nds/openldap/openldap-2.4.35.ebuild,v 1.15 2014/10/12 06:26:40 robbat2 Exp $
-
-EAPI="4"
-
-inherit db-use eutils flag-o-matic multilib ssl-cert versionator toolchain-funcs autotools user
-
-BIS_PN=rfc2307bis.schema
-BIS_PV=20120525
-BIS_P="${BIS_PN}-${BIS_PV}"
-
-DESCRIPTION="LDAP suite of application and development tools"
-HOMEPAGE="http://www.OpenLDAP.org/"
-SRC_URI="mirror://openldap/openldap-release/${P}.tgz
- mirror://gentoo/${BIS_P}"
-
-LICENSE="OPENLDAP GPL-2"
-SLOT="0"
-KEYWORDS="alpha amd64 arm hppa ia64 ~mips ppc ppc64 ~s390 ~sh sparc x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd ~x86-freebsd ~amd64-linux ~x86-linux ~x86-solaris"
-
-IUSE_DAEMON="crypt icu samba slp tcpd experimental minimal"
-IUSE_BACKEND="+berkdb"
-IUSE_OVERLAY="overlays perl"
-IUSE_OPTIONAL="gnutls iodbc sasl ssl odbc debug ipv6 +syslog selinux"
-IUSE_CONTRIB="smbkrb5passwd kerberos"
-IUSE_CONTRIB="${IUSE_CONTRIB} -cxx"
-IUSE="${IUSE_DAEMON} ${IUSE_BACKEND} ${IUSE_OVERLAY} ${IUSE_OPTIONAL} ${IUSE_CONTRIB}"
-
-REQUIRED_USE="cxx? ( sasl )"
-
-# openssl is needed to generate lanman-passwords required by samba
-RDEPEND="icu? ( dev-libs/icu )
- ssl? ( !gnutls? ( dev-libs/openssl )
- gnutls? ( net-libs/gnutls dev-libs/libgcrypt:0 ) )
- sasl? ( dev-libs/cyrus-sasl )
- !minimal? (
- sys-devel/libtool
- tcpd? ( sys-apps/tcp-wrappers )
- odbc? ( !iodbc? ( dev-db/unixODBC )
- iodbc? ( dev-db/libiodbc ) )
- slp? ( net-libs/openslp )
- perl? ( dev-lang/perl[-build(-)] )
- samba? ( dev-libs/openssl )
- berkdb? ( sys-libs/db )
- smbkrb5passwd? (
- dev-libs/openssl
- app-crypt/heimdal )
- kerberos? ( virtual/krb5 )
- cxx? ( dev-libs/cyrus-sasl )
- )
- selinux? ( sec-policy/selinux-ldap )"
-DEPEND="${RDEPEND}
- sys-apps/groff"
-
-# for tracking versions
-OPENLDAP_VERSIONTAG=".version-tag"
-OPENLDAP_DEFAULTDIR_VERSIONTAG="/var/lib/openldap-data"
-
-openldap_filecount() {
- local dir="$1"
- find "${dir}" -type f ! -name '.*' ! -name 'DB_CONFIG*' | wc -l
-}
-
-openldap_find_versiontags() {
- # scan for all datadirs
- openldap_datadirs=""
- if [ -f "${EROOT}"/etc/openldap/slapd.conf ]; then
- openldap_datadirs="$(awk '{if($1 == "directory") print $2 }' ${EROOT}/etc/openldap/slapd.conf)"
- fi
- openldap_datadirs="${openldap_datadirs} ${OPENLDAP_DEFAULTDIR_VERSIONTAG}"
-
- einfo
- einfo "Scanning datadir(s) from slapd.conf and"
- einfo "the default installdir for Versiontags"
- einfo "(${OPENLDAP_DEFAULTDIR_VERSIONTAG} may appear twice)"
- einfo
-
- # scan datadirs if we have a version tag
- openldap_found_tag=0
- have_files=0
- for each in ${openldap_datadirs}; do
- CURRENT_TAGDIR=${ROOT}`echo ${each} | sed "s:\/::"`
- CURRENT_TAG=${CURRENT_TAGDIR}/${OPENLDAP_VERSIONTAG}
- if [ -d ${CURRENT_TAGDIR} ] && [ ${openldap_found_tag} == 0 ] ; then
- einfo "- Checking ${each}..."
- if [ -r ${CURRENT_TAG} ] ; then
- # yey, we have one :)
- einfo " Found Versiontag in ${each}"
- source ${CURRENT_TAG}
- if [ "${OLDPF}" == "" ] ; then
- eerror "Invalid Versiontag found in ${CURRENT_TAGDIR}"
- eerror "Please delete it"
- eerror
- die "Please kill the invalid versiontag in ${CURRENT_TAGDIR}"
- fi
-
- OLD_MAJOR=`get_version_component_range 2-3 ${OLDPF}`
-
- [ $(openldap_filecount ${CURRENT_TAGDIR}) -gt 0 ] && have_files=1
-
- # are we on the same branch?
- if [ "${OLD_MAJOR}" != "${PV:0:3}" ] ; then
- ewarn " Versiontag doesn't match current major release!"
- if [[ "${have_files}" == "1" ]] ; then
- eerror " Versiontag says other major and you (probably) have datafiles!"
- echo
- openldap_upgrade_howto
- else
- einfo " No real problem, seems there's no database."
- fi
- else
- einfo " Versiontag is fine here :)"
- fi
- else
- einfo " Non-tagged dir ${each}"
- [ $(openldap_filecount ${each}) -gt 0 ] && have_files=1
- if [[ "${have_files}" == "1" ]] ; then
- einfo " EEK! Non-empty non-tagged datadir, counting `ls -a ${each} | wc -l` files"
- echo
-
- eerror
- eerror "Your OpenLDAP Installation has a non tagged datadir that"
- eerror "possibly contains a database at ${CURRENT_TAGDIR}"
- eerror
- eerror "Please export data if any entered and empty or remove"
- eerror "the directory, installation has been stopped so you"
- eerror "can take required action"
- eerror
- eerror "For a HOWTO on exporting the data, see instructions in the ebuild"
- eerror
- openldap_upgrade_howto
- die "Please move the datadir ${CURRENT_TAGDIR} away"
- fi
- fi
- einfo
- fi
- done
- [ "${have_files}" == "1" ] && einfo "DB files present" || einfo "No DB files present"
-
- # Now we must check for the major version of sys-libs/db linked against.
- SLAPD_PATH=${EROOT}/usr/$(get_libdir)/openldap/slapd
- if [ "${have_files}" == "1" -a -f "${SLAPD_PATH}" ]; then
- OLDVER="$(/usr/bin/ldd ${SLAPD_PATH} \
- | awk '/libdb-/{gsub("^libdb-","",$1);gsub(".so$","",$1);print $1}')"
- NEWVER="$(use berkdb && db_findver sys-libs/db)"
- local fail=0
- if [ -z "${OLDVER}" -a -z "${NEWVER}" ]; then
- :
- # Nothing wrong here.
- elif [ -z "${OLDVER}" -a -n "${NEWVER}" ]; then
- eerror " Your existing version of OpenLDAP was not built against"
- eerror " any version of sys-libs/db, but the new one will build"
- eerror " against ${NEWVER} and your database may be inaccessible."
- echo
- fail=1
- elif [ -n "${OLDVER}" -a -z "${NEWVER}" ]; then
- eerror " Your existing version of OpenLDAP was built against"
- eerror " sys-libs/db:${OLDVER}, but the new one will not be"
- eerror " built against any version and your database may be"
- eerror " inaccessible."
- echo
- fail=1
- elif [ "${OLDVER}" != "${NEWVER}" ]; then
- eerror " Your existing version of OpenLDAP was built against"
- eerror " sys-libs/db:${OLDVER}, but the new one will build against"
- eerror " ${NEWVER} and your database would be inaccessible."
- echo
- fail=1
- fi
- [ "${fail}" == "1" ] && openldap_upgrade_howto
- fi
-
- echo
- einfo
- einfo "All datadirs are fine, proceeding with merge now..."
- einfo
-}
-
-openldap_upgrade_howto() {
- eerror
- eerror "A (possible old) installation of OpenLDAP was detected,"
- eerror "installation will not proceed for now."
- eerror
- eerror "As major version upgrades can corrupt your database,"
- eerror "you need to dump your database and re-create it afterwards."
- eerror
- eerror "Additionally, rebuilding against different major versions of the"
- eerror "sys-libs/db libraries will cause your database to be inaccessible."
- eerror ""
- d="$(date -u +%s)"
- l="/root/ldapdump.${d}"
- i="${l}.raw"
- eerror " 1. /etc/init.d/slurpd stop ; /etc/init.d/slapd stop"
- eerror " 2. slapcat -l ${i}"
- eerror " 3. egrep -v '^(entry|context)CSN:' <${i} >${l}"
- eerror " 4. mv /var/lib/openldap-data/ /var/lib/openldap-data-backup/"
- eerror " 5. emerge --update \=net-nds/${PF}"
- eerror " 6. etc-update, and ensure that you apply the changes"
- eerror " 7. slapadd -l ${l}"
- eerror " 8. chown ldap:ldap /var/lib/openldap-data/*"
- eerror " 9. /etc/init.d/slapd start"
- eerror "10. check that your data is intact."
- eerror "11. set up the new replication system."
- eerror
- if [ "${FORCE_UPGRADE}" != "1" ]; then
- die "You need to upgrade your database first"
- else
- eerror "You have the magical FORCE_UPGRADE=1 in place."
- eerror "Don't say you weren't warned about data loss."
- fi
-}
-
-pkg_setup() {
- if ! use sasl && use cxx ; then
- die "To build the ldapc++ library you must emerge openldap with sasl support"
- fi
- # Bug #322787
- if use minimal && ! has_version "net-nds/openldap" ; then
- einfo "No datadir scan needed, openldap not installed"
- elif use minimal && has_version "net-nds/openldap" && built_with_use net-nds/openldap minimal ; then
- einfo "Skipping scan for previous datadirs as requested by minimal useflag"
- else
- openldap_find_versiontags
- fi
-
- enewgroup ldap 439
- enewuser ldap 439 -1 /usr/$(get_libdir)/openldap ldap
-}
-
-src_prepare() {
- # ensure correct SLAPI path by default
- sed -i -e 's,\(#define LDAPI_SOCK\).*,\1 "'"${EPREFIX}"'/var/run/openldap/slapd.sock",' \
- "${S}"/include/ldap_defaults.h
-
- epatch "${FILESDIR}"/${PN}-2.4.17-gcc44.patch
-
- epatch \
- "${FILESDIR}"/${PN}-2.2.14-perlthreadsfix.patch \
- "${FILESDIR}"/${PN}-2.4.15-ppolicy.patch
-
- # bug #116045 - still present in 2.4.28
- epatch "${FILESDIR}"/${PN}-2.4.35-contrib-smbk5pwd.patch
- # bug #408077 - samba4
- epatch "${FILESDIR}"/${PN}-2.4.35-contrib-samba4.patch
-
- # bug #189817
- epatch "${FILESDIR}"/${PN}-2.4.11-libldap_r.patch
-
- # bug #233633
- epatch "${FILESDIR}"/${PN}-2.4.17-fix-lmpasswd-gnutls-symbols.patch
-
- # bug #281495
- epatch "${FILESDIR}"/${PN}-2.4.28-gnutls-gcrypt.patch
-
- # bug #294350
- epatch "${FILESDIR}"/${PN}-2.4.6-evolution-ntlm.patch
-
- # unbreak /bin/sh -> dash
- epatch "${FILESDIR}"/${PN}-2.4.28-fix-dash.patch
-
- # bug #420959
- epatch "${FILESDIR}"/${PN}-2.4.31-gcc47.patch
-
- # bug #421463
- epatch "${FILESDIR}"/${PN}-2.4.33-gnutls.patch
-
- cd "${S}"/build
- einfo "Making sure upstream build strip does not do stripping too early"
- sed -i.orig \
- -e '/^STRIP/s,-s,,g' \
- top.mk || die "Failed to block stripping"
-
- # wrong assumption that /bin/sh is /bin/bash
- sed -i \
- -e 's|/bin/sh|/bin/bash|g' \
- "${S}"/tests/scripts/* || die "sed failed"
-
- cd "${S}"
- AT_NOEAUTOMAKE=yes eautoreconf
-}
-
-build_contrib_module() {
- lt="${S}/libtool"
- # <dir> <sources> <outputname>
- cd "${S}/contrib/slapd-modules/$1"
- einfo "Compiling contrib-module: $3"
- # Make sure it's uppercase
- local define_name="$(echo "SLAPD_OVER_${1}" | LC_ALL=C tr '[:lower:]' '[:upper:]')"
- "${lt}" --mode=compile --tag=CC \
- "${CC}" \
- -D${define_name}=SLAPD_MOD_DYNAMIC \
- -I../../../include -I../../../servers/slapd ${CFLAGS} \
- -o ${2%.c}.lo -c $2 || die "compiling $3 failed"
- einfo "Linking contrib-module: $3"
- "${lt}" --mode=link --tag=CC \
- "${CC}" -module \
- ${CFLAGS} \
- ${LDFLAGS} \
- -rpath "${EPREFIX}"/usr/$(get_libdir)/openldap/openldap \
- -o $3.la ${2%.c}.lo || die "linking $3 failed"
-}
-
-src_configure() {
- local myconf
-
- #Fix for glibc-2.8 and ucred. Bug 228457.
- append-flags -D_GNU_SOURCE
-
- # Bug 408001
- use elibc_FreeBSD && append-flags -DMDB_DSYNC=O_SYNC -DMDB_FDATASYNC=fsync
-
- use debug && myconf="${myconf} $(use_enable debug)"
-
- # ICU usage is not configurable
- export ac_cv_header_unicode_utypes_h="$(use icu && echo yes || echo no)"
-
- if ! use minimal ; then
- # re-enable serverside overlay chains per bug #296567
- # see ldap docs chaper 12.3.1 for details
- myconf="${myconf} --enable-ldap"
-
- # backends
- myconf="${myconf} --enable-slapd"
- if use berkdb ; then
- einfo "Using Berkeley DB for local backend"
- myconf="${myconf} --enable-bdb --enable-hdb"
- # We need to include the slotted db.h dir for FreeBSD
- append-cppflags -I$(db_includedir)
- else
- ewarn
- ewarn "Note: if you disable berkdb, you can only use remote-backends!"
- ewarn
- ebeep 5
- myconf="${myconf} --disable-bdb --disable-hdb"
- fi
- for backend in dnssrv ldap meta monitor null passwd relay shell sock; do
- myconf="${myconf} --enable-${backend}=mod"
- done
-
- myconf="${myconf} $(use_enable perl perl mod)"
-
- myconf="${myconf} $(use_enable odbc sql mod)"
- if use odbc ; then
- local odbc_lib="unixodbc"
- if use iodbc ; then
- odbc_lib="iodbc"
- append-cppflags -I"${EPREFIX}"/usr/include/iodbc
- fi
- myconf="${myconf} --with-odbc=${odbc_lib}"
- fi
-
- # slapd options
- myconf="${myconf} $(use_enable crypt) $(use_enable slp)"
- myconf="${myconf} $(use_enable samba lmpasswd) $(use_enable syslog)"
- if use experimental ; then
- myconf="${myconf} --enable-dynacl"
- myconf="${myconf} --enable-aci=mod"
- fi
- for option in aci cleartext modules rewrite rlookups slapi; do
- myconf="${myconf} --enable-${option}"
- done
-
- # slapd overlay options
- # Compile-in the syncprov, the others as module
- myconf="${myconf} --enable-syncprov=yes"
- use overlays && myconf="${myconf} --enable-overlays=mod"
-
- else
- myconf="${myconf} --disable-slapd --disable-bdb --disable-hdb"
- myconf="${myconf} --disable-overlays --disable-syslog"
- fi
-
- # basic functionality stuff
- myconf="${myconf} $(use_enable ipv6)"
- myconf="${myconf} $(use_with sasl cyrus-sasl) $(use_enable sasl spasswd)"
- myconf="${myconf} $(use_enable tcpd wrappers)"
-
- local ssl_lib="no"
- if use ssl || ( use ! minimal && use samba ) ; then
- ssl_lib="openssl"
- use gnutls && ssl_lib="gnutls"
- fi
-
- myconf="${myconf} --with-tls=${ssl_lib}"
-
- for basicflag in dynamic local proctitle shared static; do
- myconf="${myconf} --enable-${basicflag}"
- done
-
- # connectionless ldap per bug #342439
- append-cppflags -DLDAP_CONNECTIONLESS
-
- tc-export CC AR CXX
- STRIP=/bin/true \
- econf \
- --libexecdir="${EPREFIX}"/usr/$(get_libdir)/openldap \
- ${myconf} || die "econf failed"
-}
-
-src_configure_cxx() {
- # This needs the libraries built by the first build run.
- # So we have to run it AFTER the main build, not just after the main
- # configure.
- if ! use minimal ; then
- if use cxx ; then
- local myconf_ldapcpp
- myconf_ldapcpp="${myconf_ldapcpp} --with-ldap-includes=../../include"
- cd "${S}/contrib/ldapc++"
- OLD_LDFLAGS="$LDFLAGS"
- OLD_CPPFLAGS="$CPPFLAGS"
- append-ldflags -L../../libraries/liblber/.libs -L../../libraries/libldap/.libs
- append-ldflags -L../../../libraries/liblber/.libs -L../../../libraries/libldap/.libs
- append-cppflags -I../../../include
- econf ${myconf_ldapcpp} \
- CC="${CC}" \
- CXX="${CXX}" \
- || die "econf ldapc++ failed"
- CPPFLAGS="$OLD_CPPFLAGS"
- LDFLAGS="${OLD_LDFLAGS}"
- fi
- fi
-}
-
-src_compile() {
- emake depend || die "emake depend failed"
- emake CC="${CC}" AR="${AR}" SHELL="${EPREFIX}"/bin/bash || die "emake failed"
- lt="${S}/libtool"
- export echo="echo"
-
- if ! use minimal ; then
- if use cxx ; then
- einfo "Building contrib library: ldapc++"
- src_configure_cxx
- cd "${S}/contrib/ldapc++"
- emake \
- CC="${CC}" CXX="${CXX}" \
- || die "emake ldapc++ failed"
- fi
-
- if use smbkrb5passwd ; then
- einfo "Building contrib-module: smbk5pwd"
- cd "${S}/contrib/slapd-modules/smbk5pwd"
-
- emake \
- DEFS="-DDO_SAMBA -DDO_KRB5 -DDO_SHADOW" \
- KRB5_INC="$(krb5-config --cflags)" \
- CC="${CC}" libexecdir="${EPREFIX}/usr/$(get_libdir)/openldap" \
- || die "emake smbk5pwd failed"
- fi
-
- if use overlays ; then
- einfo "Building contrib-module: samba4"
- cd "${S}/contrib/slapd-modules/samba4"
-
- emake \
- CC="${CC}" libexecdir="/usr/$(get_libdir)/openldap" \
- || die "emake samba4 failed"
- fi
-
- if use kerberos ; then
- cd "${S}/contrib/slapd-modules/passwd"
- einfo "Compiling contrib-module: pw-kerberos"
- "${lt}" --mode=compile --tag=CC \
- "${CC}" \
- -I../../../include \
- ${CFLAGS} \
- $(krb5-config --cflags) \
- -DHAVE_KRB5 \
- -o kerberos.lo \
- -c kerberos.c || die "compiling pw-kerberos failed"
- einfo "Linking contrib-module: pw-kerberos"
- "${lt}" --mode=link --tag=CC \
- "${CC}" -module \
- ${CFLAGS} \
- ${LDFLAGS} \
- -rpath "${EPREFIX}"/usr/$(get_libdir)/openldap/openldap \
- -o pw-kerberos.la \
- kerberos.lo || die "linking pw-kerberos failed"
- fi
- # We could build pw-radius if GNURadius would install radlib.h
- cd "${S}/contrib/slapd-modules/passwd"
- einfo "Compiling contrib-module: pw-netscape"
- "${lt}" --mode=compile --tag=CC \
- "${CC}" \
- -I../../../include \
- ${CFLAGS} \
- -o netscape.lo \
- -c netscape.c || die "compiling pw-netscape failed"
- einfo "Linking contrib-module: pw-netscape"
- "${lt}" --mode=link --tag=CC \
- "${CC}" -module \
- ${CFLAGS} \
- ${LDFLAGS} \
- -rpath "${EPREFIX}"/usr/$(get_libdir)/openldap/openldap \
- -o pw-netscape.la \
- netscape.lo || die "linking pw-netscape failed"
-
- build_contrib_module "addpartial" "addpartial-overlay.c" "addpartial-overlay"
- build_contrib_module "allop" "allop.c" "overlay-allop"
- build_contrib_module "allowed" "allowed.c" "allowed"
- build_contrib_module "autogroup" "autogroup.c" "autogroup"
- build_contrib_module "denyop" "denyop.c" "denyop-overlay"
- build_contrib_module "dsaschema" "dsaschema.c" "dsaschema-plugin"
- # lastmod may not play well with other overlays
- build_contrib_module "lastmod" "lastmod.c" "lastmod"
- build_contrib_module "nops" "nops.c" "nops-overlay"
- build_contrib_module "trace" "trace.c" "trace"
- # build slapi-plugins
- cd "${S}/contrib/slapi-plugins/addrdnvalues"
- einfo "Building contrib-module: addrdnvalues plugin"
- "${CC}" -shared \
- -I../../../include \
- ${CFLAGS} \
- -fPIC \
- ${LDFLAGS} \
- -o libaddrdnvalues-plugin.so \
- addrdnvalues.c || die "Building libaddrdnvalues-plugin.so failed"
-
- fi
-}
-
-src_test() {
- cd tests ; make tests || die "make tests failed"
-}
-
-src_install() {
- lt="${S}/libtool"
- emake DESTDIR="${D}" SHELL="${EPREFIX}"/bin/bash install || die "make install failed"
-
- dodoc ANNOUNCEMENT CHANGES COPYRIGHT README "${FILESDIR}"/DB_CONFIG.fast.example
- docinto rfc ; dodoc doc/rfc/*.txt
-
- if ! use minimal; then
- # openldap modules go here
- # TODO: write some code to populate slapd.conf with moduleload statements
- keepdir /usr/$(get_libdir)/openldap/openldap/
-
- # initial data storage dir
- keepdir /var/lib/openldap-data
- use prefix || fowners ldap:ldap /var/lib/openldap-data
- fperms 0700 /var/lib/openldap-data
-
- echo "OLDPF='${PF}'" > "${ED}${OPENLDAP_DEFAULTDIR_VERSIONTAG}/${OPENLDAP_VERSIONTAG}"
- echo "# do NOT delete this. it is used" >> "${ED}${OPENLDAP_DEFAULTDIR_VERSIONTAG}/${OPENLDAP_VERSIONTAG}"
- echo "# to track versions for upgrading." >> "${ED}${OPENLDAP_DEFAULTDIR_VERSIONTAG}/${OPENLDAP_VERSIONTAG}"
-
- # use our config
- rm "${ED}"etc/openldap/slapd.conf
- insinto /etc/openldap
- newins "${FILESDIR}"/${PN}-2.3.34-slapd-conf slapd.conf
- configfile="${ED}"etc/openldap/slapd.conf
-
- # populate with built backends
- ebegin "populate config with built backends"
- for x in "${ED}"usr/$(get_libdir)/openldap/openldap/back_*.so; do
- elog "Adding $(basename ${x})"
- sed -e "/###INSERTDYNAMICMODULESHERE###$/a# moduleload\t$(basename ${x})" -i "${configfile}"
- done
- sed -e "s:###INSERTDYNAMICMODULESHERE###$:# modulepath\t${EPREFIX}/usr/$(get_libdir)/openldap/openldap:" -i "${configfile}"
- use prefix || fowners root:ldap /etc/openldap/slapd.conf
- fperms 0640 /etc/openldap/slapd.conf
- cp "${configfile}" "${configfile}".default
- eend
-
- # install our own init scripts
- newinitd "${FILESDIR}"/slapd-initd-2.4.28-r1 slapd
- newconfd "${FILESDIR}"/slapd-confd-2.4.28-r1 slapd
- if [ $(get_libdir) != lib ]; then
- sed -e "s,/usr/lib/,/usr/$(get_libdir)/," -i "${ED}"etc/init.d/slapd
- fi
- # If built without SLP, we don't need to be before avahi
- use slp \
- || sed -i \
- -e '/before/{s/avahi-daemon//g}' \
- "${ED}"etc/init.d/slapd
-
- if use cxx ; then
- einfo "Install the ldapc++ library"
- cd "${S}/contrib/ldapc++"
- emake DESTDIR="${D}" libexecdir="${EPREFIX}/usr/$(get_libdir)/openldap" install || die "emake install ldapc++ failed"
- newdoc README ldapc++-README
- fi
-
- if use smbkrb5passwd ; then
- einfo "Install the smbk5pwd module"
- cd "${S}/contrib/slapd-modules/smbk5pwd"
- emake DESTDIR="${D}" libexecdir="${EPREFIX}/usr/$(get_libdir)/openldap" install || die "emake install smbk5pwd failed"
- newdoc README smbk5pwd-README
- fi
-
- if use overlays ; then
- einfo "Install the samba4 module"
- cd "${S}/contrib/slapd-modules/samba4"
- emake DESTDIR="${D}" libexecdir="/usr/$(get_libdir)/openldap" install || die "emake install samba4 failed"
- newdoc README samba4-README
- fi
-
- einfo "Installing contrib modules"
- cd "${S}/contrib/slapd-modules"
- for l in */*.la; do
- "${lt}" --mode=install cp ${l} \
- "${ED}"usr/$(get_libdir)/openldap/openldap || \
- die "installing ${l} failed"
- done
- docinto contrib
- newdoc addpartial/README addpartial-README
- newdoc allop/README allop-README
- doman allop/slapo-allop.5
- newdoc autogroup/README autogroup-README
- newdoc denyop/denyop.c denyop-denyop.c
- newdoc dsaschema/README dsaschema-README
- doman lastmod/slapo-lastmod.5
- doman nops/slapo-nops.5
- newdoc passwd/README passwd-README
- cd "${S}/contrib/slapi-plugins"
- insinto /usr/$(get_libdir)/openldap/openldap
- doins */*.so
- docinto contrib
- newdoc addrdnvalues/README addrdnvalues-README
-
- insinto /etc/openldap/schema
- newins "${DISTDIR}"/${BIS_P} ${BIS_PN}
- fi
-}
-
-pkg_preinst() {
- # keep old libs if any
- preserve_old_lib /usr/$(get_libdir)/{liblber,libldap_r,liblber}-2.3$(get_libname 0)
-}
-
-pkg_postinst() {
- if ! use minimal ; then
- # You cannot build SSL certificates during src_install that will make
- # binary packages containing your SSL key, which is both a security risk
- # and a misconfiguration if multiple machines use the same key and cert.
- if use ssl; then
- install_cert /etc/openldap/ssl/ldap
- use prefix || chown ldap:ldap "${EROOT}"etc/openldap/ssl/ldap.*
- ewarn "Self-signed SSL certificates are treated harshly by OpenLDAP 2.[12]"
- ewarn "Self-signed SSL certificates are treated harshly by OpenLDAP 2.[12]"
- ewarn "add 'TLS_REQCERT never' if you want to use them."
- fi
-
- if use prefix; then
- # Warn about prefix issues with slapd
- eerror "slapd might NOT be usable on Prefix systems as it requires root privileges"
- eerror "to start up, and requires that certain files directories be owned by"
- eerror "ldap:ldap. As Prefix does not support changing ownership of files and"
- eerror "directories, you will have to manually fix this yourself."
- fi
-
- # These lines force the permissions of various content to be correct
- use prefix || chown ldap:ldap "${EROOT}"var/run/openldap
- chmod 0755 "${EROOT}"var/run/openldap
- use prefix || chown root:ldap "${EROOT}"etc/openldap/slapd.conf{,.default}
- chmod 0640 "${EROOT}"etc/openldap/slapd.conf{,.default}
- use prefix || chown ldap:ldap "${EROOT}"var/lib/openldap-data
- fi
-
- elog "Getting started using OpenLDAP? There is some documentation available:"
- elog "Gentoo Guide to OpenLDAP Authentication"
- elog "(http://www.gentoo.org/doc/en/ldap-howto.xml)"
- elog "---"
- elog "An example file for tuning BDB backends with openldap is"
- elog "DB_CONFIG.fast.example in /usr/share/doc/${PF}/"
-
- preserve_old_lib_notify /usr/$(get_libdir)/{liblber,libldap,libldap_r}-2.3$(get_libname 0)
-}
+++ /dev/null
-# Copyright 1999-2014 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-nds/openldap/openldap-2.4.38-r1.ebuild,v 1.8 2014/10/12 06:26:40 robbat2 Exp $
-
-EAPI="5"
-
-inherit db-use eutils flag-o-matic multilib ssl-cert versionator toolchain-funcs autotools user systemd
-
-BIS_PN=rfc2307bis.schema
-BIS_PV=20140524
-BIS_P="${BIS_PN}-${BIS_PV}"
-
-DESCRIPTION="LDAP suite of application and development tools"
-HOMEPAGE="http://www.OpenLDAP.org/"
-
-# mirrors are mostly not working, using canonical URI
-SRC_URI="ftp://ftp.openldap.org/pub/OpenLDAP/openldap-release/${P}.tgz
- mirror://gentoo/${BIS_P}"
-
-LICENSE="OPENLDAP GPL-2"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd ~x86-freebsd ~amd64-linux ~x86-linux ~x86-solaris"
-
-IUSE_DAEMON="crypt icu samba slp tcpd experimental minimal"
-IUSE_BACKEND="+berkdb"
-IUSE_OVERLAY="overlays perl"
-IUSE_OPTIONAL="gnutls iodbc sasl ssl odbc debug ipv6 +syslog selinux"
-IUSE_CONTRIB="smbkrb5passwd kerberos"
-IUSE_CONTRIB="${IUSE_CONTRIB} -cxx"
-IUSE="${IUSE_DAEMON} ${IUSE_BACKEND} ${IUSE_OVERLAY} ${IUSE_OPTIONAL} ${IUSE_CONTRIB}"
-
-REQUIRED_USE="cxx? ( sasl )"
-
-# openssl is needed to generate lanman-passwords required by samba
-RDEPEND="icu? ( dev-libs/icu:= )
- ssl? ( !gnutls? ( dev-libs/openssl )
- gnutls? ( net-libs/gnutls dev-libs/libgcrypt:0 ) )
- sasl? ( dev-libs/cyrus-sasl:= )
- !minimal? (
- sys-devel/libtool
- tcpd? ( sys-apps/tcp-wrappers )
- odbc? ( !iodbc? ( dev-db/unixODBC )
- iodbc? ( dev-db/libiodbc ) )
- slp? ( net-libs/openslp )
- perl? ( dev-lang/perl[-build(-)] )
- samba? ( dev-libs/openssl )
- berkdb? ( sys-libs/db )
- smbkrb5passwd? (
- dev-libs/openssl
- app-crypt/heimdal )
- kerberos? ( virtual/krb5 )
- cxx? ( dev-libs/cyrus-sasl:= )
- )
- selinux? ( sec-policy/selinux-ldap )"
-DEPEND="${RDEPEND}
- sys-apps/groff"
-
-# for tracking versions
-OPENLDAP_VERSIONTAG=".version-tag"
-OPENLDAP_DEFAULTDIR_VERSIONTAG="/var/lib/openldap-data"
-
-openldap_filecount() {
- local dir="$1"
- find "${dir}" -type f ! -name '.*' ! -name 'DB_CONFIG*' | wc -l
-}
-
-openldap_find_versiontags() {
- # scan for all datadirs
- openldap_datadirs=""
- if [ -f "${EROOT}"/etc/openldap/slapd.conf ]; then
- openldap_datadirs="$(awk '{if($1 == "directory") print $2 }' ${EROOT}/etc/openldap/slapd.conf)"
- fi
- openldap_datadirs="${openldap_datadirs} ${OPENLDAP_DEFAULTDIR_VERSIONTAG}"
-
- einfo
- einfo "Scanning datadir(s) from slapd.conf and"
- einfo "the default installdir for Versiontags"
- einfo "(${OPENLDAP_DEFAULTDIR_VERSIONTAG} may appear twice)"
- einfo
-
- # scan datadirs if we have a version tag
- openldap_found_tag=0
- have_files=0
- for each in ${openldap_datadirs}; do
- CURRENT_TAGDIR=${ROOT}`echo ${each} | sed "s:\/::"`
- CURRENT_TAG=${CURRENT_TAGDIR}/${OPENLDAP_VERSIONTAG}
- if [ -d ${CURRENT_TAGDIR} ] && [ ${openldap_found_tag} == 0 ] ; then
- einfo "- Checking ${each}..."
- if [ -r ${CURRENT_TAG} ] ; then
- # yey, we have one :)
- einfo " Found Versiontag in ${each}"
- source ${CURRENT_TAG}
- if [ "${OLDPF}" == "" ] ; then
- eerror "Invalid Versiontag found in ${CURRENT_TAGDIR}"
- eerror "Please delete it"
- eerror
- die "Please kill the invalid versiontag in ${CURRENT_TAGDIR}"
- fi
-
- OLD_MAJOR=`get_version_component_range 2-3 ${OLDPF}`
-
- [ $(openldap_filecount ${CURRENT_TAGDIR}) -gt 0 ] && have_files=1
-
- # are we on the same branch?
- if [ "${OLD_MAJOR}" != "${PV:0:3}" ] ; then
- ewarn " Versiontag doesn't match current major release!"
- if [[ "${have_files}" == "1" ]] ; then
- eerror " Versiontag says other major and you (probably) have datafiles!"
- echo
- openldap_upgrade_howto
- else
- einfo " No real problem, seems there's no database."
- fi
- else
- einfo " Versiontag is fine here :)"
- fi
- else
- einfo " Non-tagged dir ${each}"
- [ $(openldap_filecount ${each}) -gt 0 ] && have_files=1
- if [[ "${have_files}" == "1" ]] ; then
- einfo " EEK! Non-empty non-tagged datadir, counting `ls -a ${each} | wc -l` files"
- echo
-
- eerror
- eerror "Your OpenLDAP Installation has a non tagged datadir that"
- eerror "possibly contains a database at ${CURRENT_TAGDIR}"
- eerror
- eerror "Please export data if any entered and empty or remove"
- eerror "the directory, installation has been stopped so you"
- eerror "can take required action"
- eerror
- eerror "For a HOWTO on exporting the data, see instructions in the ebuild"
- eerror
- openldap_upgrade_howto
- die "Please move the datadir ${CURRENT_TAGDIR} away"
- fi
- fi
- einfo
- fi
- done
- [ "${have_files}" == "1" ] && einfo "DB files present" || einfo "No DB files present"
-
- # Now we must check for the major version of sys-libs/db linked against.
- SLAPD_PATH=${EROOT}/usr/$(get_libdir)/openldap/slapd
- if [ "${have_files}" == "1" -a -f "${SLAPD_PATH}" ]; then
- OLDVER="$(/usr/bin/ldd ${SLAPD_PATH} \
- | awk '/libdb-/{gsub("^libdb-","",$1);gsub(".so$","",$1);print $1}')"
- NEWVER="$(use berkdb && db_findver sys-libs/db)"
- local fail=0
- if [ -z "${OLDVER}" -a -z "${NEWVER}" ]; then
- :
- # Nothing wrong here.
- elif [ -z "${OLDVER}" -a -n "${NEWVER}" ]; then
- eerror " Your existing version of OpenLDAP was not built against"
- eerror " any version of sys-libs/db, but the new one will build"
- eerror " against ${NEWVER} and your database may be inaccessible."
- echo
- fail=1
- elif [ -n "${OLDVER}" -a -z "${NEWVER}" ]; then
- eerror " Your existing version of OpenLDAP was built against"
- eerror " sys-libs/db:${OLDVER}, but the new one will not be"
- eerror " built against any version and your database may be"
- eerror " inaccessible."
- echo
- fail=1
- elif [ "${OLDVER}" != "${NEWVER}" ]; then
- eerror " Your existing version of OpenLDAP was built against"
- eerror " sys-libs/db:${OLDVER}, but the new one will build against"
- eerror " ${NEWVER} and your database would be inaccessible."
- echo
- fail=1
- fi
- [ "${fail}" == "1" ] && openldap_upgrade_howto
- fi
-
- echo
- einfo
- einfo "All datadirs are fine, proceeding with merge now..."
- einfo
-}
-
-openldap_upgrade_howto() {
- eerror
- eerror "A (possible old) installation of OpenLDAP was detected,"
- eerror "installation will not proceed for now."
- eerror
- eerror "As major version upgrades can corrupt your database,"
- eerror "you need to dump your database and re-create it afterwards."
- eerror
- eerror "Additionally, rebuilding against different major versions of the"
- eerror "sys-libs/db libraries will cause your database to be inaccessible."
- eerror ""
- d="$(date -u +%s)"
- l="/root/ldapdump.${d}"
- i="${l}.raw"
- eerror " 1. /etc/init.d/slurpd stop ; /etc/init.d/slapd stop"
- eerror " 2. slapcat -l ${i}"
- eerror " 3. egrep -v '^(entry|context)CSN:' <${i} >${l}"
- eerror " 4. mv /var/lib/openldap-data/ /var/lib/openldap-data-backup/"
- eerror " 5. emerge --update \=net-nds/${PF}"
- eerror " 6. etc-update, and ensure that you apply the changes"
- eerror " 7. slapadd -l ${l}"
- eerror " 8. chown ldap:ldap /var/lib/openldap-data/*"
- eerror " 9. /etc/init.d/slapd start"
- eerror "10. check that your data is intact."
- eerror "11. set up the new replication system."
- eerror
- if [ "${FORCE_UPGRADE}" != "1" ]; then
- die "You need to upgrade your database first"
- else
- eerror "You have the magical FORCE_UPGRADE=1 in place."
- eerror "Don't say you weren't warned about data loss."
- fi
-}
-
-pkg_setup() {
- if ! use sasl && use cxx ; then
- die "To build the ldapc++ library you must emerge openldap with sasl support"
- fi
- # Bug #322787
- if use minimal && ! has_version "net-nds/openldap" ; then
- einfo "No datadir scan needed, openldap not installed"
- elif use minimal && has_version "net-nds/openldap" && built_with_use net-nds/openldap minimal ; then
- einfo "Skipping scan for previous datadirs as requested by minimal useflag"
- else
- openldap_find_versiontags
- fi
-
- enewgroup ldap 439
- enewuser ldap 439 -1 /usr/$(get_libdir)/openldap ldap
-}
-
-src_prepare() {
- # ensure correct SLAPI path by default
- sed -i -e 's,\(#define LDAPI_SOCK\).*,\1 "'"${EPREFIX}"'/var/run/openldap/slapd.sock",' \
- "${S}"/include/ldap_defaults.h
-
- epatch "${FILESDIR}"/${PN}-2.4.17-gcc44.patch
-
- epatch \
- "${FILESDIR}"/${PN}-2.2.14-perlthreadsfix.patch \
- "${FILESDIR}"/${PN}-2.4.15-ppolicy.patch
-
- # bug #116045 - still present in 2.4.28
- epatch "${FILESDIR}"/${PN}-2.4.35-contrib-smbk5pwd.patch
- # bug #408077 - samba4
- epatch "${FILESDIR}"/${PN}-2.4.35-contrib-samba4.patch
-
- # bug #189817
- epatch "${FILESDIR}"/${PN}-2.4.11-libldap_r.patch
-
- # bug #233633
- epatch "${FILESDIR}"/${PN}-2.4.17-fix-lmpasswd-gnutls-symbols.patch
-
- # bug #281495
- epatch "${FILESDIR}"/${PN}-2.4.28-gnutls-gcrypt.patch
-
- # bug #294350
- epatch "${FILESDIR}"/${PN}-2.4.6-evolution-ntlm.patch
-
- # unbreak /bin/sh -> dash
- epatch "${FILESDIR}"/${PN}-2.4.28-fix-dash.patch
-
- # bug #420959
- epatch "${FILESDIR}"/${PN}-2.4.31-gcc47.patch
-
- # bug #421463
- epatch "${FILESDIR}"/${PN}-2.4.33-gnutls.patch
-
- cd "${S}"/build
- einfo "Making sure upstream build strip does not do stripping too early"
- sed -i.orig \
- -e '/^STRIP/s,-s,,g' \
- top.mk || die "Failed to block stripping"
-
- # wrong assumption that /bin/sh is /bin/bash
- sed -i \
- -e 's|/bin/sh|/bin/bash|g' \
- "${S}"/tests/scripts/* || die "sed failed"
-
- cd "${S}"
- AT_NOEAUTOMAKE=yes eautoreconf
-}
-
-build_contrib_module() {
- lt="${S}/libtool"
- # <dir> <sources> <outputname>
- cd "${S}/contrib/slapd-modules/$1"
- einfo "Compiling contrib-module: $3"
- # Make sure it's uppercase
- local define_name="$(echo "SLAPD_OVER_${1}" | LC_ALL=C tr '[:lower:]' '[:upper:]')"
- "${lt}" --mode=compile --tag=CC \
- "${CC}" \
- -D${define_name}=SLAPD_MOD_DYNAMIC \
- -I../../../include -I../../../servers/slapd ${CFLAGS} \
- -o ${2%.c}.lo -c $2 || die "compiling $3 failed"
- einfo "Linking contrib-module: $3"
- "${lt}" --mode=link --tag=CC \
- "${CC}" -module \
- ${CFLAGS} \
- ${LDFLAGS} \
- -rpath "${EPREFIX}"/usr/$(get_libdir)/openldap/openldap \
- -o $3.la ${2%.c}.lo || die "linking $3 failed"
-}
-
-src_configure() {
- local myconf
-
- #Fix for glibc-2.8 and ucred. Bug 228457.
- append-flags -D_GNU_SOURCE
-
- # Bug 408001
- use elibc_FreeBSD && append-flags -DMDB_DSYNC=O_SYNC -DMDB_FDATASYNC=fsync
-
- use debug && myconf="${myconf} $(use_enable debug)"
-
- # ICU usage is not configurable
- export ac_cv_header_unicode_utypes_h="$(use icu && echo yes || echo no)"
-
- if ! use minimal ; then
- # re-enable serverside overlay chains per bug #296567
- # see ldap docs chaper 12.3.1 for details
- myconf="${myconf} --enable-ldap"
-
- # backends
- myconf="${myconf} --enable-slapd"
- if use berkdb ; then
- einfo "Using Berkeley DB for local backend"
- myconf="${myconf} --enable-bdb --enable-hdb"
- # We need to include the slotted db.h dir for FreeBSD
- append-cppflags -I$(db_includedir)
- else
- ewarn
- ewarn "Note: if you disable berkdb, you can only use remote-backends!"
- ewarn
- myconf="${myconf} --disable-bdb --disable-hdb"
- fi
- for backend in dnssrv ldap meta monitor null passwd relay shell sock; do
- myconf="${myconf} --enable-${backend}=mod"
- done
-
- myconf="${myconf} $(use_enable perl perl mod)"
-
- myconf="${myconf} $(use_enable odbc sql mod)"
- if use odbc ; then
- local odbc_lib="unixodbc"
- if use iodbc ; then
- odbc_lib="iodbc"
- append-cppflags -I"${EPREFIX}"/usr/include/iodbc
- fi
- myconf="${myconf} --with-odbc=${odbc_lib}"
- fi
-
- # slapd options
- myconf="${myconf} $(use_enable crypt) $(use_enable slp)"
- myconf="${myconf} $(use_enable samba lmpasswd) $(use_enable syslog)"
- if use experimental ; then
- myconf="${myconf} --enable-dynacl"
- myconf="${myconf} --enable-aci=mod"
- fi
- for option in aci cleartext modules rewrite rlookups slapi; do
- myconf="${myconf} --enable-${option}"
- done
-
- # slapd overlay options
- # Compile-in the syncprov, the others as module
- myconf="${myconf} --enable-syncprov=yes"
- use overlays && myconf="${myconf} --enable-overlays=mod"
-
- else
- myconf="${myconf} --disable-slapd --disable-bdb --disable-hdb"
- myconf="${myconf} --disable-overlays --disable-syslog"
- fi
-
- # basic functionality stuff
- myconf="${myconf} $(use_enable ipv6)"
- myconf="${myconf} $(use_with sasl cyrus-sasl) $(use_enable sasl spasswd)"
- myconf="${myconf} $(use_enable tcpd wrappers)"
-
- local ssl_lib="no"
- if use ssl || ( ! use minimal && use samba ) ; then
- ssl_lib="openssl"
- use gnutls && ssl_lib="gnutls"
- fi
-
- myconf="${myconf} --with-tls=${ssl_lib}"
-
- for basicflag in dynamic local proctitle shared static; do
- myconf="${myconf} --enable-${basicflag}"
- done
-
- # connectionless ldap per bug #342439
- append-cppflags -DLDAP_CONNECTIONLESS
-
- tc-export CC AR CXX
- STRIP=/bin/true \
- econf \
- --libexecdir="${EPREFIX}"/usr/$(get_libdir)/openldap \
- ${myconf} || die "econf failed"
-}
-
-src_configure_cxx() {
- # This needs the libraries built by the first build run.
- # So we have to run it AFTER the main build, not just after the main
- # configure.
- if ! use minimal ; then
- if use cxx ; then
- local myconf_ldapcpp
- myconf_ldapcpp="${myconf_ldapcpp} --with-ldap-includes=../../include"
- cd "${S}/contrib/ldapc++"
- OLD_LDFLAGS="$LDFLAGS"
- OLD_CPPFLAGS="$CPPFLAGS"
- append-ldflags -L../../libraries/liblber/.libs -L../../libraries/libldap/.libs
- append-ldflags -L../../../libraries/liblber/.libs -L../../../libraries/libldap/.libs
- append-cppflags -I../../../include
- econf ${myconf_ldapcpp} \
- CC="${CC}" \
- CXX="${CXX}" \
- || die "econf ldapc++ failed"
- CPPFLAGS="$OLD_CPPFLAGS"
- LDFLAGS="${OLD_LDFLAGS}"
- fi
- fi
-}
-
-src_compile() {
- emake depend || die "emake depend failed"
- emake CC="${CC}" AR="${AR}" SHELL="${EPREFIX}"/bin/bash || die "emake failed"
- lt="${S}/libtool"
- export echo="echo"
-
- if ! use minimal ; then
- if use cxx ; then
- einfo "Building contrib library: ldapc++"
- src_configure_cxx
- cd "${S}/contrib/ldapc++"
- emake \
- CC="${CC}" CXX="${CXX}" \
- || die "emake ldapc++ failed"
- fi
-
- if use smbkrb5passwd ; then
- einfo "Building contrib-module: smbk5pwd"
- cd "${S}/contrib/slapd-modules/smbk5pwd"
-
- emake \
- DEFS="-DDO_SAMBA -DDO_KRB5 -DDO_SHADOW" \
- KRB5_INC="$(krb5-config --cflags)" \
- CC="${CC}" libexecdir="${EPREFIX}/usr/$(get_libdir)/openldap" \
- || die "emake smbk5pwd failed"
- fi
-
- if use overlays ; then
- einfo "Building contrib-module: samba4"
- cd "${S}/contrib/slapd-modules/samba4"
-
- emake \
- CC="${CC}" libexecdir="/usr/$(get_libdir)/openldap" \
- || die "emake samba4 failed"
- fi
-
- if use kerberos ; then
- cd "${S}/contrib/slapd-modules/passwd"
- einfo "Compiling contrib-module: pw-kerberos"
- "${lt}" --mode=compile --tag=CC \
- "${CC}" \
- -I../../../include \
- ${CFLAGS} \
- $(krb5-config --cflags) \
- -DHAVE_KRB5 \
- -o kerberos.lo \
- -c kerberos.c || die "compiling pw-kerberos failed"
- einfo "Linking contrib-module: pw-kerberos"
- "${lt}" --mode=link --tag=CC \
- "${CC}" -module \
- ${CFLAGS} \
- ${LDFLAGS} \
- -rpath "${EPREFIX}"/usr/$(get_libdir)/openldap/openldap \
- -o pw-kerberos.la \
- kerberos.lo || die "linking pw-kerberos failed"
- fi
- # We could build pw-radius if GNURadius would install radlib.h
- cd "${S}/contrib/slapd-modules/passwd"
- einfo "Compiling contrib-module: pw-netscape"
- "${lt}" --mode=compile --tag=CC \
- "${CC}" \
- -I../../../include \
- ${CFLAGS} \
- -o netscape.lo \
- -c netscape.c || die "compiling pw-netscape failed"
- einfo "Linking contrib-module: pw-netscape"
- "${lt}" --mode=link --tag=CC \
- "${CC}" -module \
- ${CFLAGS} \
- ${LDFLAGS} \
- -rpath "${EPREFIX}"/usr/$(get_libdir)/openldap/openldap \
- -o pw-netscape.la \
- netscape.lo || die "linking pw-netscape failed"
-
- build_contrib_module "addpartial" "addpartial-overlay.c" "addpartial-overlay"
- build_contrib_module "allop" "allop.c" "overlay-allop"
- build_contrib_module "allowed" "allowed.c" "allowed"
- build_contrib_module "autogroup" "autogroup.c" "autogroup"
- build_contrib_module "denyop" "denyop.c" "denyop-overlay"
- build_contrib_module "dsaschema" "dsaschema.c" "dsaschema-plugin"
- # lastmod may not play well with other overlays
- build_contrib_module "lastmod" "lastmod.c" "lastmod"
- build_contrib_module "nops" "nops.c" "nops-overlay"
- build_contrib_module "trace" "trace.c" "trace"
- # build slapi-plugins
- cd "${S}/contrib/slapi-plugins/addrdnvalues"
- einfo "Building contrib-module: addrdnvalues plugin"
- "${CC}" -shared \
- -I../../../include \
- ${CFLAGS} \
- -fPIC \
- ${LDFLAGS} \
- -o libaddrdnvalues-plugin.so \
- addrdnvalues.c || die "Building libaddrdnvalues-plugin.so failed"
-
- fi
-}
-
-src_test() {
- cd tests ; make tests || die "make tests failed"
-}
-
-src_install() {
- lt="${S}/libtool"
- emake DESTDIR="${D}" SHELL="${EPREFIX}"/bin/bash install || die "make install failed"
-
- dodoc ANNOUNCEMENT CHANGES COPYRIGHT README "${FILESDIR}"/DB_CONFIG.fast.example
- docinto rfc ; dodoc doc/rfc/*.txt
-
- if ! use minimal; then
- # openldap modules go here
- # TODO: write some code to populate slapd.conf with moduleload statements
- keepdir /usr/$(get_libdir)/openldap/openldap/
-
- # initial data storage dir
- keepdir /var/lib/openldap-data
- use prefix || fowners ldap:ldap /var/lib/openldap-data
- fperms 0700 /var/lib/openldap-data
-
- echo "OLDPF='${PF}'" > "${ED}${OPENLDAP_DEFAULTDIR_VERSIONTAG}/${OPENLDAP_VERSIONTAG}"
- echo "# do NOT delete this. it is used" >> "${ED}${OPENLDAP_DEFAULTDIR_VERSIONTAG}/${OPENLDAP_VERSIONTAG}"
- echo "# to track versions for upgrading." >> "${ED}${OPENLDAP_DEFAULTDIR_VERSIONTAG}/${OPENLDAP_VERSIONTAG}"
-
- # use our config
- rm "${ED}"etc/openldap/slapd.conf
- insinto /etc/openldap
- newins "${FILESDIR}"/${PN}-2.3.34-slapd-conf slapd.conf
- configfile="${ED}"etc/openldap/slapd.conf
-
- # populate with built backends
- ebegin "populate config with built backends"
- for x in "${ED}"usr/$(get_libdir)/openldap/openldap/back_*.so; do
- elog "Adding $(basename ${x})"
- sed -e "/###INSERTDYNAMICMODULESHERE###$/a# moduleload\t$(basename ${x})" -i "${configfile}"
- done
- sed -e "s:###INSERTDYNAMICMODULESHERE###$:# modulepath\t${EPREFIX}/usr/$(get_libdir)/openldap/openldap:" -i "${configfile}"
- use prefix || fowners root:ldap /etc/openldap/slapd.conf
- fperms 0640 /etc/openldap/slapd.conf
- cp "${configfile}" "${configfile}".default
- eend
-
- # install our own init scripts and systemd unit files
- newinitd "${FILESDIR}"/slapd-initd-2.4.28-r1 slapd
- newconfd "${FILESDIR}"/slapd-confd-2.4.28-r1 slapd
- systemd_dounit "${FILESDIR}"/slapd.service
- systemd_install_serviced "${FILESDIR}"/slapd.service.conf
- systemd_newtmpfilesd "${FILESDIR}"/slapd.tmpfilesd slapd.conf
-
- if [ $(get_libdir) != lib ]; then
- sed -e "s,/usr/lib/,/usr/$(get_libdir)/," -i \
- "${ED}"/etc/init.d/slapd \
- "${ED}"/usr/lib/systemd/system/slapd.service || die
- fi
- # If built without SLP, we don't need to be before avahi
- use slp \
- || sed -i \
- -e '/before/{s/avahi-daemon//g}' \
- "${ED}"etc/init.d/slapd
-
- if use cxx ; then
- einfo "Install the ldapc++ library"
- cd "${S}/contrib/ldapc++"
- emake DESTDIR="${D}" libexecdir="${EPREFIX}/usr/$(get_libdir)/openldap" install || die "emake install ldapc++ failed"
- newdoc README ldapc++-README
- fi
-
- if use smbkrb5passwd ; then
- einfo "Install the smbk5pwd module"
- cd "${S}/contrib/slapd-modules/smbk5pwd"
- emake DESTDIR="${D}" libexecdir="${EPREFIX}/usr/$(get_libdir)/openldap" install || die "emake install smbk5pwd failed"
- newdoc README smbk5pwd-README
- fi
-
- if use overlays ; then
- einfo "Install the samba4 module"
- cd "${S}/contrib/slapd-modules/samba4"
- emake DESTDIR="${D}" libexecdir="/usr/$(get_libdir)/openldap" install || die "emake install samba4 failed"
- newdoc README samba4-README
- fi
-
- einfo "Installing contrib modules"
- cd "${S}/contrib/slapd-modules"
- for l in */*.la; do
- "${lt}" --mode=install cp ${l} \
- "${ED}"usr/$(get_libdir)/openldap/openldap || \
- die "installing ${l} failed"
- done
- docinto contrib
- newdoc addpartial/README addpartial-README
- newdoc allop/README allop-README
- doman allop/slapo-allop.5
- newdoc autogroup/README autogroup-README
- newdoc denyop/denyop.c denyop-denyop.c
- newdoc dsaschema/README dsaschema-README
- doman lastmod/slapo-lastmod.5
- doman nops/slapo-nops.5
- newdoc passwd/README passwd-README
- cd "${S}/contrib/slapi-plugins"
- insinto /usr/$(get_libdir)/openldap/openldap
- doins */*.so
- docinto contrib
- newdoc addrdnvalues/README addrdnvalues-README
-
- insinto /etc/openldap/schema
- newins "${DISTDIR}"/${BIS_P} ${BIS_PN}
- fi
-}
-
-pkg_preinst() {
- # keep old libs if any
- preserve_old_lib /usr/$(get_libdir)/{liblber,libldap_r,liblber}-2.3$(get_libname 0)
-}
-
-pkg_postinst() {
- if ! use minimal ; then
- # You cannot build SSL certificates during src_install that will make
- # binary packages containing your SSL key, which is both a security risk
- # and a misconfiguration if multiple machines use the same key and cert.
- if use ssl; then
- install_cert /etc/openldap/ssl/ldap
- use prefix || chown ldap:ldap "${EROOT}"etc/openldap/ssl/ldap.*
- ewarn "Self-signed SSL certificates are treated harshly by OpenLDAP 2.[12]"
- ewarn "Self-signed SSL certificates are treated harshly by OpenLDAP 2.[12]"
- ewarn "add 'TLS_REQCERT never' if you want to use them."
- fi
-
- if use prefix; then
- # Warn about prefix issues with slapd
- eerror "slapd might NOT be usable on Prefix systems as it requires root privileges"
- eerror "to start up, and requires that certain files directories be owned by"
- eerror "ldap:ldap. As Prefix does not support changing ownership of files and"
- eerror "directories, you will have to manually fix this yourself."
- fi
-
- # These lines force the permissions of various content to be correct
- use prefix || chown ldap:ldap "${EROOT}"var/run/openldap
- chmod 0755 "${EROOT}"var/run/openldap
- use prefix || chown root:ldap "${EROOT}"etc/openldap/slapd.conf{,.default}
- chmod 0640 "${EROOT}"etc/openldap/slapd.conf{,.default}
- use prefix || chown ldap:ldap "${EROOT}"var/lib/openldap-data
- fi
-
- elog "Getting started using OpenLDAP? There is some documentation available:"
- elog "Gentoo Guide to OpenLDAP Authentication"
- elog "(http://www.gentoo.org/doc/en/ldap-howto.xml)"
- elog "---"
- elog "An example file for tuning BDB backends with openldap is"
- elog "DB_CONFIG.fast.example in /usr/share/doc/${PF}/"
-
- preserve_old_lib_notify /usr/$(get_libdir)/{liblber,libldap,libldap_r}-2.3$(get_libname 0)
-}
projects / gentoo.git / commitdiff