--- /dev/null
+# Copyright 1999-2011 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-cluster/torque/torque-3.0.2.ebuild,v 1.1 2011/09/30 23:11:54 jsbronder Exp $
+
+EAPI=2
+inherit flag-o-matic eutils linux-info autotools
+
+DESCRIPTION="Resource manager and queuing system based on OpenPBS"
+HOMEPAGE="http://www.clusterresources.com/products/torque/"
+SRC_URI="http://www.clusterresources.com/downloads/${PN}/${P}.tar.gz"
+
+LICENSE="torque-2.5"
+
+SLOT="0"
+KEYWORDS="~alpha ~amd64 ~hppa ~ia64 ~mips ~ppc ~ppc64 ~sparc ~x86"
+IUSE="cpusets +crypt doc drmaa kernel_linux munge server +syslog threads tk"
+
+# ed is used by makedepend-sh
+DEPEND_COMMON="sys-libs/ncurses
+ sys-libs/readline
+ munge? ( sys-auth/munge )
+ tk? ( dev-lang/tk )
+ syslog? ( virtual/logger )
+ !games-util/qstat"
+
+DEPEND="${DEPEND_COMMON}
+ sys-apps/ed
+ !sys-cluster/slurm"
+
+RDEPEND="${DEPEND_COMMON}
+ crypt? ( net-misc/openssh )
+ !crypt? ( net-misc/netkit-rsh )"
+
+pkg_setup() {
+ PBS_SERVER_HOME="${PBS_SERVER_HOME:-/var/spool/torque}"
+
+ # Find a Torque server to use. Check environment, then
+ # current setup (if any), and fall back on current hostname.
+ if [ -z "${PBS_SERVER_NAME}" ]; then
+ if [ -f "${ROOT}${PBS_SERVER_HOME}/server_name" ]; then
+ PBS_SERVER_NAME="$(<${ROOT}${PBS_SERVER_HOME}/server_name)"
+ else
+ PBS_SERVER_NAME=$(hostname -f)
+ fi
+ fi
+
+ USE_CPUSETS="--disable-cpusets"
+ if use cpusets; then
+ if ! use kernel_linux; then
+ einfo
+ elog " Torque currently only has support for cpusets in linux."
+ elog "Assuming you didn't really want this USE flag."
+ einfo
+ else
+ linux-info_pkg_setup
+ einfo
+ elog " Torque support for cpusets is still in development, you may"
+ elog "wish to disable it for production use."
+ einfo
+ if ! linux_config_exists || ! linux_chkconfig_present CPUSETS; then
+ einfo
+ elog " Torque support for cpusets will require that you recompile"
+ elog "your kernel with CONFIG_CPUSETS enabled."
+ einfo
+ fi
+ USE_CPUSETS="--enable-cpusets"
+ fi
+ fi
+}
+
+src_prepare() {
+ # as-needed fix, libutils.a needs librt.
+ sed -i 's,^\(LDADD = .*\)$(MOMLIBS) $(PBS_LIBS),\1$(PBS_LIBS) $(MOMLIBS),' \
+ src/resmom/Makefile.am || die
+ eautoreconf || die
+}
+
+src_configure() {
+ local myconf="--with-rcp=mom_rcp"
+
+ use crypt && myconf="--with-rcp=scp"
+
+ # Note: Nvidia GPU support is currently disabled pending user
+ # interest and ability to test.
+ econf \
+ $(use_enable tk gui) \
+ $(use_enable syslog) \
+ $(use_enable server) \
+ $(use_enable drmaa) \
+ $(use_enable threads high-availability) \
+ $(use_enable munge munge-auth) \
+ --with-server-home=${PBS_SERVER_HOME} \
+ --with-environ=/etc/pbs_environment \
+ --with-default-server=${PBS_SERVER_NAME} \
+ --disable-gcc-warnings \
+ --with-tcp-retry-limit=2 \
+ ${USE_CPUSETS} \
+ ${myconf} \
+ || die "econf failed"
+}
+
+# WARNING
+# OpenPBS is extremely stubborn about directory permissions. Sometimes it will
+# just fall over with the error message, but in some spots it will just ignore
+# you and fail strangely. Likewise it also barfs on our .keep files!
+pbs_createspool() {
+ local root="$1"
+ local s="$(dirname "${PBS_SERVER_HOME}")"
+ local h="${PBS_SERVER_HOME}"
+ local sp="${h}/server_priv"
+ einfo "Building spool directory under ${D}${h}"
+ local a d m
+ local dir_spec="
+ 0755:${h}/aux 0700:${h}/checkpoint
+ 0755:${h}/mom_logs 0751:${h}/mom_priv 0751:${h}/mom_priv/jobs
+ 1777:${h}/spool 1777:${h}/undelivered"
+
+ if use server; then
+ dir_spec="${dir_spec} 0755:${h}/sched_logs
+ 0755:${h}/sched_priv/accounting 0755:${h}/server_logs
+ 0750:${h}/server_priv 0755:${h}/server_priv/accounting
+ 0750:${h}/server_priv/acl_groups 0750:${h}/server_priv/acl_hosts
+ 0750:${h}/server_priv/acl_svr 0750:${h}/server_priv/acl_users
+ 0750:${h}/server_priv/jobs 0750:${h}/server_priv/queues"
+ fi
+
+ for a in ${dir_spec}; do
+ d="${a/*:}"
+ m="${a/:*}"
+ if [[ ! -d "${root}${d}" ]]; then
+ install -d -m${m} "${root}${d}"
+ else
+ chmod ${m} "${root}${d}"
+ fi
+ # (#149226) If we're running in src_*, then keepdir
+ if [[ "${root}" = "${D}" ]]; then
+ keepdir ${d}
+ fi
+ done
+}
+
+src_install() {
+ # Make directories first
+ pbs_createspool "${D}"
+
+ make DESTDIR="${D}" install || die "make install failed"
+
+ dodoc CHANGELOG README.* Release_Notes || die "dodoc failed"
+ if use doc; then
+ dodoc doc/admin_guide.ps doc/*.pdf || die "dodoc failed"
+ fi
+
+ # The build script isn't alternative install location friendly,
+ # So we have to fix some hard-coded paths in tclIndex for xpbs* to work
+ for file in `find "${D}" -iname tclIndex`; do
+ sed -e "s/${D//\// }/ /" "${file}" > "${file}.new"
+ mv "${file}.new" "${file}"
+ done
+
+ if use server; then
+ newinitd "${FILESDIR}"/pbs_server-init.d-munge pbs_server
+ newinitd "${FILESDIR}"/pbs_sched-init.d pbs_sched
+ fi
+ newinitd "${FILESDIR}"/pbs_mom-init.d-munge pbs_mom
+ newconfd "${FILESDIR}"/torque-conf.d-munge torque
+ newenvd "${FILESDIR}"/torque-env.d 25torque
+}
+
+pkg_preinst() {
+ if [[ -f "${ROOT}etc/pbs_environment" ]]; then
+ cp "${ROOT}etc/pbs_environment" "${D}"/etc/pbs_environment
+ fi
+
+ echo "${PBS_SERVER_NAME}" > "${D}${PBS_SERVER_HOME}/server_name"
+
+ # Fix up the env.d file to use our set server home.
+ sed -i "s:/var/spool/torque:${PBS_SERVER_HOME}:g" "${D}"/etc/env.d/25torque
+
+ if use munge; then
+ sed -i 's,\(PBS_USE_MUNGE=\).*,\11,' "${D}"etc/conf.d/torque || die
+ fi
+}
+
+pkg_postinst() {
+ pbs_createspool "${ROOT}"
+ elog " If this is the first time torque has been installed, then you are not"
+ elog "ready to start the server. Please refer to the documentation located at:"
+ elog "http://www.clusterresources.com/wiki/doku.php?id=torque:torque_wiki"
+
+ elog " For a basic setup, you may use emerge --config ${PN}"
+ if use server; then
+ elog " The format for the serverdb is now xml only. If you do not want"
+ elog "this, reverting to 2.4.x is your only option. The upgrade will"
+ elog "happen automatically when pbs_server is restarted"
+ fi
+ elog " The on-wire protocol version has been bumped from 1 to 2."
+ elog "Versions of Torque before 3.0.0 are no longer able to communicate."
+}
+
+# root will be setup as the primary operator/manager, the local machine
+# will be added as a node and we'll create a simple queue, batch.
+pkg_config() {
+ local h="$(echo "${ROOT}/${PBS_SERVER_HOME}" | sed 's:///*:/:g')"
+ local rc=0
+
+ ebegin "Configuring Torque"
+ einfo "Using ${h} as the pbs homedir"
+ einfo "Using ${PBS_SERVER_NAME} as the pbs_server"
+
+ # Check for previous configuration and bail if found.
+ if [ -e "${h}/server_priv/acl_svr/operators" ] \
+ || [ -e "${h}/server_priv/nodes" ] \
+ || [ -e "${h}/mom_priv/config" ]; then
+ ewarn "Previous Torque configuration detected. Press any key to"
+ ewarn "continue or press Control-C to abort now"
+ read
+ fi
+
+ # pbs_mom configuration.
+ echo "\$pbsserver ${PBS_SERVER_NAME}" > "${h}/mom_priv/config"
+ echo "\$logevent 255" >> "${h}/mom_priv/config"
+
+ if use server; then
+ local qmgr="${ROOT}/usr/bin/qmgr -c"
+ # pbs_server bails on repeated backslashes.
+ if ! echo "y" | "${ROOT}"/usr/sbin/pbs_server -d "${h}" -t create; then
+ eerror "Failed to start pbs_server"
+ rc=1
+ else
+ ${qmgr} "set server operators = root@$(hostname -f)" ${PBS_SERVER_NAME}
+ ${qmgr} "create queue batch" ${PBS_SERVER_NAME}
+ ${qmgr} "set queue batch queue_type = Execution" ${PBS_SERVER_NAME}
+ ${qmgr} "set queue batch started = True" ${PBS_SERVER_NAME}
+ ${qmgr} "set queue batch enabled = True" ${PBS_SERVER_NAME}
+ ${qmgr} "set server default_queue = batch" ${PBS_SERVER_NAME}
+ ${qmgr} "set server resources_default.nodes = 1" ${PBS_SERVER_NAME}
+ ${qmgr} "set server scheduling = True" ${PBS_SERVER_NAME}
+
+ "${ROOT}"/usr/bin/qterm -t quick ${PBS_SERVER_NAME} || rc=1
+
+ # Add the local machine as a node.
+ echo "$(hostname -f) np=1" > "${h}/server_priv/nodes"
+ fi
+ fi
+ eend ${rc}
+}
projects / gentoo.git / commitdiff