-# Copyright 2005 Gentoo Foundation
+# Copyright 2007-2008 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/eclass/qt4-build.eclass,v 1.6 2007/12/23 20:48:30 caleb Exp $
+# $Header: /var/cvsroot/gentoo-x86/eclass/qt4-build.eclass,v 1.7 2008/03/05 23:06:26 ingmar Exp $
# @ECLASS: qt4-build.eclass
# @MAINTAINER:
# Caleb Tennis <caleb@gentoo.org>
# @BLURB:
-# Eclass for Qt4
+# Eclass for Qt4
# @DESCRIPTION:
# This eclass contains various functions that are used when building Qt4
IUSE="${IUSE} debug"
+case "${PV}" in
+ 4.4.0_beta*)
+ SRCTYPE="${SRCTYPE:-opensource-src}"
+ MY_PV="${PV/_beta/-beta}"
+ ;;
+ *)
+ SRCTYPE="${SRCTYPE:-opensource-src}"
+ MY_PV="${PV}"
+ ;;
+esac
+S=${WORKDIR}/qt-x11-${SRCTYPE}-${MY_PV}
+
+SRC_URI="ftp://ftp.trolltech.com/qt/source/qt-x11-${SRCTYPE}-${MY_PV}.tar.bz2"
+
qt4-build_pkg_setup() {
- # Set up installation directories
+ # Check USE requirements
+ qt4-build_check_use
+ # Set up installation directories
QTBASEDIR=/usr/$(get_libdir)/qt4
QTPREFIXDIR=/usr
QTBINDIR=/usr/bin
}
qt4-build_src_unpack() {
+ # TODO: partial unpacks, cfr split KDE ebuilds.
unpack ${A}
cd "${S}"
+ if [[ ${PN} != qt-core ]]; then
+ skip_qmake_build_patch
+ skip_project_generation_patch
+ symlink_binaries_to_buildtree
+ fi
+
+ sed -e "s:QMAKE_CFLAGS_RELEASE.*=.*:QMAKE_CFLAGS_RELEASE=${CFLAGS}:" \
+ -e "s:QMAKE_CXXFLAGS_RELEASE.*=.*:QMAKE_CXXFLAGS_RELEASE=${CXXFLAGS}:" \
+ -e "s:QMAKE_LFLAGS_RELEASE.*=.*:QMAKE_LFLAGS_RELEASE=${LDFLAGS}:" \
+ -e "s:X11R6/::" \
+ -i "${S}"/mkspecs/$(qt_mkspecs_dir)/qmake.conf || die "sed ${S}/mkspecs/$(qt_mkspecs_dir)/qmake.conf failed"
+
+ sed -e "s:QMAKE_CFLAGS_RELEASE.*=.*:QMAKE_CFLAGS_RELEASE=${CFLAGS}:" \
+ -e "s:QMAKE_CXXFLAGS_RELEASE.*=.*:QMAKE_CXXFLAGS_RELEASE=${CXXFLAGS}:" \
+ -e "s:QMAKE_LFLAGS_RELEASE.*=.*:QMAKE_LFLAGS_RELEASE=${LDFLAGS}:" \
+ -i "${S}"/mkspecs/common/g++.conf || die "sed ${S}/mkspecs/common/g++.conf failed"
+}
+
+qt4-build_src_compile() {
# Don't let the user go too overboard with flags. If you really want to, uncomment
# out the line below and give 'er a whirl.
strip-flags
replace-flags -O3 -O2
- if [[ $( gcc-fullversion ) == "3.4.6" && gcc-specs-ssp ]] ; then
+ if [[ $(gcc-fullversion) == "3.4.6" && gcc-specs-ssp ]] ; then
ewarn "Appending -fno-stack-protector to CFLAGS/CXXFLAGS"
append-flags -fno-stack-protector
fi
+
+ myconf="$(standard_configure_options) ${myconf}"
+
+ echo ./configure ${myconf}
+ ./configure ${myconf} || die "./configure failed"
+
+ build_target_directories
}
qt4-build_src_install() {
install_directories "${QT4_TARGET_DIRECTORIES}"
+ install_qconfigs
fix_library_files
}
standard_configure_options() {
local myconf=""
- [ $(get_libdir) != "lib" ] && myconf="${myconf} -L/usr/$(get_libdir)"
+ [[ $(get_libdir) != "lib" ]] && myconf="${myconf} -L/usr/$(get_libdir)"
# Disable visibility explicitly if gcc version isn't 4
- if [[ "$(gcc-major-version)" != "4" ]]; then
+ if [[ "$(gcc-major-version)" -lt "4" ]]; then
myconf="${myconf} -no-reduce-exports"
fi
- use debug && myconf="${myconf} -debug -no-separate-debug-info" || myconf="${myconf} -release -no-separate-debug-info"
-
- myconf="${myconf} -stl -verbose -largefile -confirm-license -no-rpath\
- -prefix ${QTPREFIXDIR} -bindir ${QTBINDIR} -libdir ${QTLIBDIR} -datadir ${QTDATADIR} \
- -docdir ${QTDOCDIR} -headerdir ${QTHEADERDIR} -plugindir ${QTPLUGINDIR} \
- -sysconfdir ${QTSYSCONFDIR} -translationdir ${QTTRANSDIR} \
- -examplesdir ${QTEXAMPLESDIR} -demosdir ${QTDEMOSDIR}"
+ if use debug; then
+ myconf="${myconf} -debug -no-separate-debug-info"
+ else
+ myconf="${myconf} -release -no-separate-debug-info"
+ fi
- myconf="${myconf} -silent -fast -reduce-relocations -nomake examples -nomake demos"
+ myconf="${myconf} -stl -verbose -largefile -confirm-license -no-rpath
+ -prefix ${QTPREFIXDIR} -bindir ${QTBINDIR} -libdir ${QTLIBDIR}
+ -datadir ${QTDATADIR} -docdir ${QTDOCDIR} -headerdir ${QTHEADERDIR}
+ -plugindir ${QTPLUGINDIR} -sysconfdir ${QTSYSCONFDIR}
+ -translationdir ${QTTRANSDIR} -examplesdir ${QTEXAMPLESDIR}
+ -demosdir ${QTDEMOSDIR} -silent -fast -reduce-relocations
+ -nomake examples -nomake demos"
echo "${myconf}"
}
local dirs="$@"
for x in ${dirs}; do
cd "${S}"/${x}
- "${S}"/bin/qmake "LIBS+=-L${QTLIBDIR}" "CONFIG+=nostrip" && emake || die
+ "${S}"/bin/qmake "LIBS+=-L${QTLIBDIR}" "CONFIG+=nostrip" || die "qmake failed"
+ emake || die "emake failed"
done
}
install_directories() {
local dirs="$@"
for x in ${dirs}; do
- cd "${S}"/${x}
- emake INSTALL_ROOT="${D}" install || die
+ pushd "${S}"/${x} >/dev/null || die "Can't pushd ${S}/${x}"
+ emake INSTALL_ROOT="${D}" install || die "emake install failed"
+ popd >/dev/null || die "Can't popd from ${S}/${x}"
done
}
-qconfig_add_option() {
- local option=$1
- qconfig_remove_option $1
- sed -i -e "s:QT_CONFIG +=:QT_CONFIG += ${option}:g" /usr/share/qt4/mkspecs/qconfig.pri
+# @ECLASS-VARIABLE: QCONFIG_ADD
+# @DESCRIPTION:
+# List options that need to be added to QT_CONFIG in qconfig.pri
+QCONFIG_ADD="${QCONFIG_ADD:-}"
+
+# @ECLASS-VARIABLE: QCONFIG_REMOVE
+# @DESCRIPTION:
+# List options that need to be removed from QT_CONFIG in qconfig.pri
+QCONFIG_REMOVE="${QCONFIG_REMOVE:-}"
+
+# @ECLASS-VARIABLE: QCONFIG_DEFINE
+# @DESCRIPTION:
+# List variables that should be defined at the top of QtCore/qconfig.h
+QCONFIG_DEFINE="${QCONFIG_DEFINE:-}"
+
+install_qconfigs() {
+ if [[ -n ${QCONFIG_ADD} || -n ${QCONFIG_REMOVE} || -n ${QCONFIG_DEFINE} ]]; then
+ local x
+ for x in QCONFIG_ADD QCONFIG_REMOVE; do
+ [[ -n ${!x} ]] && echo ${x}=${!x} >> "${T}"/${PN}-qconfig.pri
+ done
+ insinto ${QTDATADIR}/mkspecs/gentoo
+ doins "${T}"/${PN}-qconfig.pri || die "installing ${PN}-qconfig.pri failed"
+
+ for x in ${QCONFIG_DEFINE}; do
+ echo "#define ${x}" >> "${T}"/gentoo-${PN}-qconfig.h
+ done
+ insinto ${QTHEADERDIR}/Gentoo
+ doins "${T}"/gentoo-${PN}-qconfig.h || die "installing ${PN}-qconfig.h failed"
+ fi
+}
+
+# Stubs for functions used by the Qt 4.4.0_technical_preview_1.
+qconfig_add_option() { : ; }
+qconfig_remove_option() { : ; }
+
+generate_qconfigs() {
+ if [[ -n ${QCONFIG_ADD} || -n ${QCONFIG_REMOVE} || -n ${QCONFIG_DEFINE} || ${CATEGORY}/${PN} == x11-libs/qt-core ]]; then
+ local x qconfig_add qconfig_remove qconfig_new
+ for x in "${ROOT}${QTDATADIR}"/mkspecs/gentoo/*-qconfig.pri; do
+ [[ -f ${x} ]] || continue
+ qconfig_add="${qconfig_add} $(sed -n 's/^QCONFIG_ADD=//p' "${x}")"
+ qconfig_remove="${qconfig_remove} $(sed -n 's/^QCONFIG_REMOVE=//p' "${x}")"
+ done
+
+ # these error checks do not use die because dying in pkg_post{inst,rm}
+ # just makes things worse.
+ if [[ -e "${ROOT}${QTDATADIR}"/mkspecs/gentoo/qconfig.pri ]]; then
+ # start with the qconfig.pri that qt-core installed
+ if ! cp "${ROOT}${QTDATADIR}"/mkspecs/gentoo/qconfig.pri \
+ "${ROOT}${QTDATADIR}"/mkspecs/qconfig.pri; then
+ eerror "cp qconfig failed."
+ return 1
+ fi
+
+ # generate list of QT_CONFIG entries from the existing list
+ # including qconfig_add and excluding qconfig_remove
+ for x in $(sed -n 's/^QT_CONFIG +=//p' \
+ "${ROOT}${QTDATADIR}"/mkspecs/qconfig.pri) ${qconfig_add}; do
+ hasq ${x} ${qconfig_remove} || qconfig_new="${qconfig_new} ${x}"
+ done
+
+ # replace the existing QT_CONFIG list with qconfig_new
+ if ! sed -i -e "s/QT_CONFIG +=.*/QT_CONFIG += ${qconfig_new}/" \
+ "${ROOT}${QTDATADIR}"/mkspecs/qconfig.pri; then
+ eerror "Sed for QT_CONFIG failed"
+ return 1
+ fi
+
+ # create Gentoo/qconfig.h
+ if [[ ! -e ${ROOT}${QTHEADERDIR}/Gentoo ]]; then
+ if ! mkdir -p "${ROOT}${QTHEADERDIR}"/Gentoo; then
+ eerror "mkdir ${QTHEADERDIR}/Gentoo failed"
+ return 1
+ fi
+ fi
+ : > "${ROOT}${QTHEADERDIR}"/Gentoo/gentoo-qconfig.h
+ for x in "${ROOT}${QTHEADERDIR}"/Gentoo/gentoo-*-qconfig.h; do
+ [[ -f ${x} ]] || continue
+ cat "${x}" >> "${ROOT}${QTHEADERDIR}"/Gentoo/gentoo-qconfig.h
+ done
+ else
+ rm -f "${ROOT}${QTDATADIR}"/mkspecs/qconfig.pri
+ rm -f "${ROOT}${QTHEADERDIR}"/Gentoo/gentoo-qconfig.h
+ rmdir "${ROOT}${QTDATADIR}"/mkspecs \
+ "${ROOT}${QTDATADIR}" \
+ "${ROOT}${QTHEADERDIR}"/Gentoo \
+ "${ROOT}${QTHEADERDIR}" 2>/dev/null
+ fi
+ fi
}
-qconfig_remove_option() {
- local option=$1
- sed -i -e "s: ${option}::g" /usr/share/qt4/mkspecs/qconfig.pri
+qt4-build_pkg_postrm() {
+ generate_qconfigs
+}
+
+qt4-build_pkg_postinst() {
+ generate_qconfigs
}
skip_qmake_build_patch() {
- # Don't need to build qmake, as it's already installed from qmake-core
- sed -i -e "s:if true:if false:g" "${S}"/configure
+ # Don't need to build qmake, as it's already installed from qt-core
+ sed -i -e "s:if true:if false:g" "${S}"/configure || die "Sed failed"
}
skip_project_generation_patch() {
# Exit the script early by throwing in an exit before all of the .pro files are scanned
- sed -i -e "s:echo \"Finding:exit 0\n\necho \"Finding:g" "${S}"/configure
+ sed -e "s:echo \"Finding:exit 0\n\necho \"Finding:g" \
+ -i "${S}"/configure || die "Sed failed"
}
-install_binaries_to_buildtree()
-{
- cp ${QTBINDIR}/qmake ${S}/bin
- cp ${QTBINDIR}/moc ${S}/bin
- cp ${QTBINDIR}/uic ${S}/bin
- cp ${QTBINDIR}/rcc ${S}/bin
+symlink_binaries_to_buildtree() {
+ for bin in qmake moc uic rcc; do
+ ln -s ${QTBINDIR}/${bin} "${S}"/bin/ || die "Symlinking ${bin} to ${S}/bin failed."
+ done
}
fix_library_files() {
- sed -i -e "s:${S}/lib:${QTLIBDIR}:g" "${D}"/${QTLIBDIR}/*.la
- sed -i -e "s:${S}/lib:${QTLIBDIR}:g" "${D}"/${QTLIBDIR}/*.prl
- sed -i -e "s:${S}/lib:${QTLIBDIR}:g" "${D}"/${QTLIBDIR}/pkgconfig/*.pc
+ for libfile in "${D}"/${QTLIBDIR}/{*.la,*.prl,pkgconfig/*.pc}; do
+ if [[ -e ${libfile} ]]; then
+ sed -i -e "s:${S}/lib:${QTLIBDIR}:g" ${libfile} || die "Sed on ${libfile} failed."
+ fi
+ done
# pkgconfig files refer to WORKDIR/bin as the moc and uic locations. Fix:
- sed -i -e "s:${S}/bin:${QTBINDIR}:g" "${D}"/${QTLIBDIR}/pkgconfig/*.pc
+ for libfile in "${D}"/${QTLIBDIR}/pkgconfig/*.pc; do
+ if [[ -e ${libfile} ]]; then
+ sed -i -e "s:${S}/bin:${QTBINDIR}:g" ${libfile} || die "Sed failed"
# Move .pc files into the pkgconfig directory
- dodir ${QTPCDIR}
- mv "${D}"/${QTLIBDIR}/pkgconfig/*.pc "${D}"/${QTPCDIR}
+
+ dodir ${QTPCDIR}
+ mv ${libfile} "${D}"/${QTPCDIR}/ \
+ || die "Moving ${libfile} to ${D}/${QTPCDIR}/ failed."
+ fi
+ done
+
+ # Don't install an empty directory
+ rmdir "${D}"/${QTLIBDIR}/pkgconfig
}
qt_use() {
- local flag="$1"
- local feature="$1"
+ local flag="${1}"
+ local feature="${1}"
local enableval=
- [[ -n $2 ]] && feature=$2
- [[ -n $3 ]] && enableval="-$3"
+ [[ -n ${2} ]] && feature=${2}
+ [[ -n ${3} ]] && enableval="-${3}"
+
+ if use ${flag}; then
+ echo "${enableval}-${feature}"
+ else
+ echo "-no-${feature}"
+ fi
+}
+
+# @ECLASS-VARIABLE: QT4_BUILT_WITH_USE_CHECK
+# @DESCRIPTION:
+# The contents of $QT4_BUILT_WITH_USE_CHECK gets fed to built_with_use
+# (eutils.eclass), line per line.
+#
+# Example:
+# @CODE
+# pkg_setup() {
+# use qt3support && QT4_BUILT_WITH_USE_CHECK="${QT4_BUILT_WITH_USE_CHECK}
+# ~x11-libs/qt-gui-${PV} qt3support"
+# qt4-build_check_use
+# }
+# @CODE
+
+# Run built_with_use on each flag and print appropriate error messages if any
+# flags are missing
+_qt_built_with_use() {
+ local missing opt pkg flag flags
+
+ if [[ ${1} = "--missing" ]]; then
+ missing="${1} ${2}" && shift 2
+ fi
+ if [[ ${1:0:1} = "-" ]]; then
+ opt=${1} && shift
+ fi
+
+ pkg=${1} && shift
+
+ for flag in "${@}"; do
+ flags="${flags} ${flag}"
+ if ! built_with_use ${missing} ${opt} ${pkg} ${flag}; then
+ flags="${flags}*"
+ else
+ [[ ${opt} = "-o" ]] && return 0
+ fi
+ done
+ if [[ "${flags# }" = "${@}" ]]; then
+ return 0
+ fi
+ if [[ ${opt} = "-o" ]]; then
+ eerror "This package requires '${pkg}' to be built with any of the following USE flags: '$*'."
+ else
+ eerror "This package requires '${pkg}' to be built with the following USE flags: '${flags# }'."
+ fi
+ return 1
+}
- useq $flag && echo "${enableval}-${feature}" || echo "-no-${feature}"
- return 0
+# @FUNCTION: qt4-build_check_use
+# @DESCRIPTION:
+# Check if the listed packages in $QT4_BUILT_WITH_USE_CHECK are built with the
+# USE flags listed.
+#
+# If any of the required USE flags are missing, an eerror will be printed for
+# each package with missing USE flags.
+qt4-build_check_use() {
+ local line missing
+ while read line; do
+ [[ -z ${line} ]] && continue
+ if ! _qt_built_with_use ${line}; then
+ missing=true
+ fi
+ done <<< "${QT4_BUILT_WITH_USE_CHECK}"
+ if [[ -n ${missing} ]]; then
+ echo
+ eerror "Flags marked with an * are missing."
+ die "Missing USE flags found"
+ fi
}
qt_mkspecs_dir() {
spec="openbsd" ;;
*-netbsd*)
spec="netbsd" ;;
- *-darwin*)
+ *-darwin*)
spec="darwin" ;;
*-linux-*|*-linux)
spec="linux" ;;
*)
- die "Unknown CHOST, no platform choosed."
+ die "Unknown CHOST, no platform choosen."
esac
CXX=$(tc-getCXX)
echo "${spec}"
}
-EXPORT_FUNCTIONS pkg_setup src_unpack src_install
+EXPORT_FUNCTIONS pkg_setup src_unpack src_compile src_install pkg_postrm pkg_postinst
projects / gentoo.git / commitdiff