--- /dev/null
+# Copyright 1999-2002 Gentoo Technologies, Inc.
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-apps/tic98/tic98-1.01-r1.ebuild,v 1.1 2002/10/19 22:48:52 mjc Exp $
+
+# NOTE: The comments in this file are for instruction and documentation.
+# They're not meant to appear with your final, production ebuild. Please
+# remember to remove them before submitting or committing your ebuild. That
+# doesn't mean you can't add your own comments though.
+
+# The 'Header' on the third line should just be left alone. When your ebuild
+# will be commited to cvs, the details on that line will be automatically
+# generated to contain the correct data.
+
+# Short one-line description of this package.
+DESCRIPTION="tic98 is a compressor for black-and-white images, in particular scanned documents. It gets very good compression, better than AT&T's DjVu system. tic98 also includes ppmd text compression (ppmd) and number compression (b_gamma_enc)"
+
+# Homepage, not used by Portage directly but handy for developer reference
+HOMEPAGE="http://www.cs.waikato.ac.nz/~singlis/"
+
+# Point to any required sources; these will be automatically downloaded by
+# Portage.
+SRC_URI="http://www.cs.waikato.ac.nz/~singlis/${P}.tar.gz"
+
+# License of the package. This must match the name of file(s) in
+# /usr/portage/licenses/. For complex license combination see the developer
+# docs on gentoo.org for details.
+LICENSE="GPL"
+
+# The SLOT variable is used to tell Portage if it's OK to keep multiple
+# versions of the same package installed at the same time. For example,
+# if we have a libfoo-1.2.2 and libfoo-1.3.2 (which is not compatible
+# with 1.2.2), it would be optimal to instruct Portage to not remove
+# libfoo-1.2.2 if we decide to upgrade to libfoo-1.3.2. To do this,
+# we specify SLOT="1.2" in libfoo-1.2.2 and SLOT="1.3" in libfoo-1.3.2.
+# emerge clean understands SLOTs, and will keep the most recent version
+# of each SLOT and remove everything else.
+# Note that normal applications should use SLOT="0" if possible, since
+# there should only be exactly one version installed at a time.
+# DO NOT USE SLOT=""! This tells Portage to disable SLOTs for this package.
+SLOT="0"
+
+# Using KEYWORDS, we can record masking information *inside* an ebuild
+# instead of relying on an external package.mask file. Right now, you
+# should set the KEYWORDS variable for every ebuild so that it contains
+# the names of all the architectures with which the ebuild works. We have
+# 4 official architecture names right now: "x86", "ppc", "sparc" and
+# "sparc64". So, if you've confirmed that your ebuild works on x86 and ppc,
+# you'd specify: KEYWORDS="x86 ppc"
+# For packages that are platform-independant (like Java, PHP or Perl
+# applications) specify all keywords.
+# DO NOT USE KEYWORDS="*". This is deprecated and only for backward
+# compatibility reasons.
+KEYWORDS="x86"
+
+# Comprehensive list of any and all USE flags leveraged in the ebuild,
+# with the exception of any ARCH specific flags, i.e. "ppc", "sparc",
+# "sparc64", "x86" and "alpha". This is a required variable. If the
+# ebuild doesn't use any USE flags, set to "".
+IUSE=""
+
+# Build-time dependencies, such as
+# ssl? ( >=openssl-0.9.6b )
+# >=perl-5.6.1-r1
+# It is advisable to use the >= syntax show above, to reflect what you
+# had installed on your system when you tested the package. Then
+# other users hopefully won't be caught without the right version of
+# a dependency.
+DEPEND=""
+
+# Run-time dependencies, same as DEPEND if RDEPEND isn't defined:
+#RDEPEND=""
+
+# Source directory; the dir where the sources can be found (automatically
+# unpacked) inside ${WORKDIR}. S will get a default setting of ${WORKDIR}/${P}
+# if you omit this line.
+
+S="${WORKDIR}/${PN}"
+
+src_compile() {
+ # Most open-source packages use GNU autoconf for configuration.
+ # You should use something similar to the following lines to
+ # configure your package before compilation. The "|| die" portion
+ # at the end will stop the build process if the command fails.
+ # You should use this at the end of critical commands in the build
+ # process. (Hint: Most commands are critical, that is, the build
+ # process should abort if they aren't successful.)
+# ./configure \
+# --host=${CHOST} \
+# --prefix=/usr \
+# --infodir=/usr/share/info \
+# --mandir=/usr/share/man || die "./configure failed"
+ # Note the use of --infodir and --mandir, above. This is to make
+ # this package FHS 2.2-compliant. For more information, see
+ # http://www.pathname.com/fhs/
+
+ # emake (previously known as pmake) is a script that calls the
+ # standard GNU make with parallel building options for speedier
+ # builds (especially on SMP systems). Try emake first. It might
+ # not work for some packages, in which case you'll have to resort
+ # to normal "make".
+ cd ${S}
+ patch -p1 < ${FILESDIR}/${P}-gentoo.diff
+ patch -p1 < $FILESDIR/${PN}.diff
+ emake all || die
+ emake all2 || die
+ #emake test || die
+ #make || die
+}
+
+src_install() {
+ # You must *personally verify* that this trick doesn't install
+ # anything outside of DESTDIR; do this by reading and
+ # understanding the install part of the Makefiles.
+ mkdir ${D}usr
+ mkdir ${D}usr/bin
+ make BIN=${D}usr/bin install || die
+ # For Makefiles that don't make proper use of DESTDIR, setting
+ # prefix is often an alternative. However if you do this, then
+ # you also need to specify mandir and infodir, since they were
+ # passed to ./configure as absolute paths (overriding the prefix
+ # setting).
+ #make \
+ # prefix=${D}/usr \
+ # mandir=${D}/usr/share/man \
+ # infodir=${D}/usr/share/info \
+ # install || die
+ # Again, verify the Makefiles! We don't want anything falling
+ # outside of ${D}.
+}
projects / gentoo.git / commitdiff