# ChangeLog for sys-devel/perl
# Copyright 2002 Gentoo Technologies, Inc.; Distributed under the GPL
-# $Header: /var/cvsroot/gentoo-x86/sys-devel/perl/ChangeLog,v 1.13 2002/10/02 12:07:57 mcummings Exp $
+# $Header: /var/cvsroot/gentoo-x86/sys-devel/perl/ChangeLog,v 1.14 2002/10/13 11:57:04 seemant Exp $
+
+*perl-5.6.1-r8 (13 Oct 2002)
+
+ 13 Oct 2002; Seemant Kulleen <seemant@gentoo.org> perl-5.6.1-r8.ebuild
+ files/digest-perl-5.6.1-r8 :
+
+ The fixes from -r7 didn't seem to make it into portage. So this version
+ has those, plus the updated MakeMaker. should close bug #8998 by
+ rac@intrigue.com (Robert Coie)
*perl-5.6.1-r7 (02 Oct 2002)
+++ /dev/null
-MD5 ec1ff15464809b562aecfaa2e65edba6 perl-5.6.1.tar.gz 5983695
+++ /dev/null
-MD5 ec1ff15464809b562aecfaa2e65edba6 perl-5.6.1.tar.gz 5983695
+++ /dev/null
-MD5 ec1ff15464809b562aecfaa2e65edba6 perl-5.6.1.tar.gz 5983695
--- /dev/null
+MD5 ec1ff15464809b562aecfaa2e65edba6 perl-5.6.1.tar.gz 5983695
+MD5 559896f9f222a750812c58b937a660f3 ExtUtils-MakeMaker-6.05.tar.gz 187528
+++ /dev/null
-# Copyright 1999-2002 Gentoo Technologies, Inc.
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-devel/perl/perl-5.6.1-r3.ebuild,v 1.10 2002/10/05 05:39:26 drobbins Exp $
-
-IUSE="berkdb gdbm"
-
-S=${WORKDIR}/${P}
-DESCRIPTION="Larry Wall's Practical Extraction and Reporting Language"
-SRC_URI="ftp://ftp.perl.org/pub/perl/CPAN/src/${P}.tar.gz"
-HOMEPAGE="http://www.perl.org"
-LICENSE="Artistic GPL-2"
-SLOT="0"
-KEYWORDS="x86 ppc sparc sparc64"
-
-DEPEND="virtual/glibc sys-apps/groff berkdb? ( >=sys-libs/db-3.2.3h-r3 =sys-libs/db-1.85-r1 ) gdbm? ( >=sys-libs/gdbm-1.8.0 )"
-
-RDEPEND="virtual/glibc berkdb? ( >=sys-libs/db-3.2.3h-r3 =sys-libs/db-1.85-r1 ) gdbm? ( >=sys-libs/gdbm-1.8.0 )"
-
-src_compile() {
-
- local myconf
- if [ "`use gdbm`" ]
- then
- myconf="-Di_gdbm"
- fi
- if [ "`use berkdb`" ]
- then
- myconf="${myconf} -Di_db -Di_ndbm"
- else
- myconf="${myconf} -Ui_db -Ui_ndbm"
- fi
-
- # configure for libperl.so
- sh Configure -des \
- -Darchname=${CHOST%%-*}-linux \
- -Dcccdlflags='-fPIC' \
- -Dccdlflags='-rdynamic' \
- -Dprefix=/usr \
- -Doptimize="${CFLAGS}" \
- -Duselargefiles \
- -Duseshrplib \
- -Dlibperl=libperl.so \
- -Dd_dosuid \
- -Dd_semctl_semun \
- ${myconf} || die
- # add optimization flags
- cp config.sh config.sh.orig
- sed -e "s/optimize='-O2'/optimize=\'${CFLAGS}\'/" config.sh.orig > config.sh
- # create libperl.so and move it out of the way
- mv -f Makefile Makefile_orig
- sed -e 's#^CCDLFLAGS = -rdynamic -Wl,-rpath,/usr/lib/perl5/.*#CCDLFLAGS = -rdynamic#' \
- Makefile_orig > Makefile
- export PARCH=`grep myarchname config.sh | cut -f2 -d"'"`
- make libperl.so || die
- mv libperl.so ${WORKDIR}
-
- # starting from scratch again
- cd ${WORKDIR}
- rm -rf ${S}
- unpack ${A}
- cd ${S}
-
- # configure for libperl.a
-# this is gross -- from Christian Gafton, Red Hat
- cat > config.over <<EOF
-installprefix=${D}/usr
-#test -d \$installprefix || mkdir \$installprefix
-#test -d \$installprefix/bin || mkdir \$installprefix/bin
-installarchlib=\`echo \$installarchlib | sed "s!\$prefix!\$installprefix!"\`
-installbin=\`echo \$installbin | sed "s!\$prefix!\$installprefix!"\`
-#installman1dir=\$installprefix/share/man/man1
-#installman3dir=\$installprefix/share/man/man3
-installman1dir=\`echo \$installman1dir | sed "s!\$prefix!\$installprefix!"\`
-installman3dir=\`echo \$installman3dir | sed "s!\$prefix!\$installprefix!"\`
-installman1dir=\`echo \$installman1dir | sed "s!/man/!/share/man/!"\`
-installman3dir=\`echo \$installman3dir | sed "s!/man/!/share/man/!"\`
-man1ext=1
-man3ext=3pm
-installprivlib=\`echo \$installprivlib | sed "s!\$prefix!\$installprefix!"\`
-installscript=\`echo \$installscript | sed "s!\$prefix!\$installprefix!"\`
-installsitelib=\`echo \$installsitelib | sed "s!\$prefix!\$installprefix!"\`
-installsitearch=\`echo \$installsitearch | sed "s!\$prefix!\$installprefix!"\`
-EOF
-
- sh Configure -des \
- -Dprefix=/usr \
- -Darchname=${CHOST%%-*}-linux \
- -Duselargefiles \
- -Dd_dosuid \
- -Dd_semctl_semun \
- ${myconf} || die
-
- #Optimize ;)
- cp config.sh config.sh.orig
- sed -e "s/optimize='-O2'/optimize=\'${CFLAGS}\'/" config.sh.orig > config.sh
- #THIS IS USED LATER:
- export PARCH=`grep myarchname config.sh | cut -f2 -d"'"`
-
-# Umm, for some reason this doesn't want to work, so we'll just remove
-# the makefiles and let make rebuild them itself. (It seems to do it
-# right the second time... -- pete
-# cp makefile makefile.orig
-# sed -e "s:^0::" makefile.orig > makefile
-
- #for some reason, this rm -f doesn't seem to actually do anything. So we explicitly use "Makefile"
- #(rather than the default "makefile") in all make commands below.
- rm -f makefile x2p/makefile
- make -f Makefile || die
- # Parallel make fails
- # dont use the || die since some tests fail on bootstrap
- make -f Makefile test
-}
-
-src_install() {
-
- insinto /usr/lib/perl5/${PV}/i686-linux/CORE/
- doins ${WORKDIR}/libperl.so
- dosym /usr/lib/perl5/${PV}/i686-linux/CORE/libperl.so /usr/lib/libperl.so
-
- export PARCH=`grep myarchname config.sh | cut -f2 -d"'"`
-
- make -f Makefile INSTALLMAN1DIR=${D}/usr/share/man/man1 INSTALLMAN3DIR=${D}/usr/share/man/man3 install || die
- install -m 755 utils/pl2pm ${D}/usr/bin/pl2pm
-
-make all -f - <<EOF
-STDH =\$(wildcard /usr/include/linux/*.h) \$(wildcard /usr/include/asm/*.h) \
- \$(wildcard /usr/include/scsi/*.h)
-GCCDIR = \$(shell gcc --print-file-name include)
-
-PERLLIB = \$(D)/usr/lib/perl5/%{perlver}%{perlrel}
-PERL = PERL5LIB=\$(PERLLIB) \$(D)/usr/bin/perl
-PHDIR = \$(PERLLIB)/\${PARCH}-linux
-H2PH = \$(PERL) \$(D)/usr/bin/h2ph -d \$(PHDIR)/
-
-all: std-headers gcc-headers fix-config
-
-std-headers: \$(STDH)
- cd /usr/include && \$(H2PH) \$(STDH:/usr/include/%%=%%)
-
-gcc-headers: \$(GCCH)
- cd \$(GCCDIR) && \$(H2PH) \$(GCCH:\$(GCCDIR)/%%=%%)
-
-fix-config: \$(PHDIR)/Config.pm
- \$(PERL) -i -p -e "s|\$(D)||g;" \$<
-
-EOF
-
-#man pages
-
-# ./perl installman --man1dir=${D}/usr/share/man/man1 --man1ext=1 --man3dir=${D}/usr/share/man/man3 --man3ext=3
-
-
-# This removes ${D} from Config.pm
-
- dosed /usr/lib/perl5/${PV}/${CHOST%%-*}-linux/Config.pm
- dosed /usr/lib/perl5/${PV}/${CHOST%%-*}-linux/.packlist
-
-# DOCUMENTATION
-
- dodoc Changes* Artistic Copying README Todo* AUTHORS
- prepalldocs
-
-# HTML Documentation
-
- dodir /usr/share/doc/${PF}/html
- ./perl installhtml --recurse --htmldir=${D}/usr/share/doc/${PF}/html
-
-}
+++ /dev/null
-# Copyright 1999-2002 Gentoo Technologies, Inc.
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-devel/perl/perl-5.6.1-r4.ebuild,v 1.12 2002/10/05 05:39:26 drobbins Exp $
-
-IUSE="berkdb gdbm"
-
-S=${WORKDIR}/${P}
-DESCRIPTION="Larry Wall's Practical Extraction and Reporting Language"
-SRC_URI="ftp://ftp.perl.org/pub/CPAN/src/${P}.tar.gz"
-HOMEPAGE="http://www.perl.org"
-LICENSE="Artistic GPL-2"
-SLOT="0"
-KEYWORDS="x86 ppc sparc sparc64"
-
-DEPEND="sys-apps/groff berkdb? ( >=sys-libs/db-3.2.3h-r3 =sys-libs/db-1.85-r1 ) gdbm? ( >=sys-libs/gdbm-1.8.0 )"
-
-RDEPEND="berkdb? ( >=sys-libs/db-3.2.3h-r3 =sys-libs/db-1.85-r1 ) gdbm? ( >=sys-libs/gdbm-1.8.0 )"
-
-src_compile() {
-
- local myconf
- if [ "`use gdbm`" ]
- then
- myconf="-Di_gdbm"
- fi
- if [ "`use berkdb`" ]
- then
- myconf="${myconf} -Di_db -Di_ndbm"
- else
- myconf="${myconf} -Ui_db -Ui_ndbm"
- fi
-
- # configure for libperl.so
- sh Configure -des \
- -Darchname=${CHOST%%-*}-linux \
- -Dcccdlflags='-fPIC' \
- -Dccdlflags='-rdynamic' \
- -Dprefix=/usr \
- -Doptimize="${CFLAGS}" \
- -Duselargefiles \
- -Duseshrplib \
- -Dlibperl=libperl.so \
- -Dd_dosuid \
- -Dd_semctl_semun \
- ${myconf} || die
- # add optimization flags
- cp config.sh config.sh.orig
- sed -e "s/optimize='-O2'/optimize=\'${CFLAGS}\'/" config.sh.orig > config.sh
- # create libperl.so and move it out of the way
- mv -f Makefile Makefile_orig
- sed -e 's#^CCDLFLAGS = -rdynamic -Wl,-rpath,/usr/lib/perl5/.*#CCDLFLAGS = -rdynamic#' \
- -e 's#^all: $(FIRSTMAKEFILE) #all: README #' \
- Makefile_orig > Makefile
- export PARCH=`grep myarchname config.sh | cut -f2 -d"'"`
- make -f Makefile depend || die
- mv makefile makefile_orig
- mv x2p/makefile x2p/makefile_orig
- egrep -v "(<built-in>|<command line>)" makefile_orig >makefile
- egrep -v "(<built-in>|<command line>)" x2p/makefile_orig >x2p/makefile
- make -f Makefile libperl.so || die
- mv libperl.so ${WORKDIR}
-
- # starting from scratch again
- cd ${WORKDIR}
- rm -rf ${S}
- unpack ${A}
- cd ${S}
-
- # configure for libperl.a
-# this is gross -- from Christian Gafton, Red Hat
- cat > config.over <<EOF
-installprefix=${D}/usr
-#test -d \$installprefix || mkdir \$installprefix
-#test -d \$installprefix/bin || mkdir \$installprefix/bin
-installarchlib=\`echo \$installarchlib | sed "s!\$prefix!\$installprefix!"\`
-installbin=\`echo \$installbin | sed "s!\$prefix!\$installprefix!"\`
-#installman1dir=\$installprefix/share/man/man1
-#installman3dir=\$installprefix/share/man/man3
-installman1dir=\`echo \$installman1dir | sed "s!\$prefix!\$installprefix!"\`
-installman3dir=\`echo \$installman3dir | sed "s!\$prefix!\$installprefix!"\`
-installman1dir=\`echo \$installman1dir | sed "s!/man/!/share/man/!"\`
-installman3dir=\`echo \$installman3dir | sed "s!/man/!/share/man/!"\`
-man1ext=1
-man3ext=3pm
-installprivlib=\`echo \$installprivlib | sed "s!\$prefix!\$installprefix!"\`
-installscript=\`echo \$installscript | sed "s!\$prefix!\$installprefix!"\`
-installsitelib=\`echo \$installsitelib | sed "s!\$prefix!\$installprefix!"\`
-installsitearch=\`echo \$installsitearch | sed "s!\$prefix!\$installprefix!"\`
-EOF
-
- sh Configure -des \
- -Dprefix=/usr \
- -Darchname=${CHOST%%-*}-linux \
- -Duselargefiles \
- -Dd_dosuid \
- -Dd_semctl_semun \
- ${myconf} || die
-
- #Optimize ;)
- cp config.sh config.sh.orig
- sed -e "s/optimize='-O2'/optimize=\'${CFLAGS}\'/" config.sh.orig > config.sh
- #THIS IS USED LATER:
- export PARCH=`grep myarchname config.sh | cut -f2 -d"'"`
-
-# Umm, for some reason this doesn't want to work, so we'll just remove
-# the makefiles and let make rebuild them itself. (It seems to do it
-# right the second time... -- pete
-# cp makefile makefile.orig
-# sed -e "s:^0::" makefile.orig > makefile
-
- mv Makefile Makefile_orig
- sed -e 's#^all: $(FIRSTMAKEFILE) #all: README #' \
- Makefile_orig > Makefile
-
- #for some reason, this rm -f doesn't seem to actually do anything. So we explicitly use "Makefile"
- #(rather than the default "makefile") in all make commands below.
- rm -f makefile x2p/makefile
- make -f Makefile depend || die
- mv makefile makefile_orig
- mv x2p/makefile x2p/makefile_orig
- egrep -v "(<built-in>|<command line>)" makefile_orig >makefile
- egrep -v "(<built-in>|<command line>)" x2p/makefile_orig >x2p/makefile
- make -f Makefile || die
- # Parallel make fails
- # dont use the || die since some tests fail on bootstrap
- if [ `expr "$PARCH" ":" "sparc"` -gt 4 ]; then
- echo "Skipping tests on this platform"
- else
- make -f Makefile test
- fi
-}
-
-src_install() {
-
- insinto /usr/lib/perl5/${PV}/i686-linux/CORE/
- doins ${WORKDIR}/libperl.so
- dosym /usr/lib/perl5/${PV}/i686-linux/CORE/libperl.so /usr/lib/libperl.so
-
- export PARCH=`grep myarchname config.sh | cut -f2 -d"'"`
-
- make -f Makefile INSTALLMAN1DIR=${D}/usr/share/man/man1 INSTALLMAN3DIR=${D}/usr/share/man/man3 install || die
- install -m 755 utils/pl2pm ${D}/usr/bin/pl2pm
-
-make all -f - <<EOF
-STDH =\$(wildcard /usr/include/linux/*.h) \$(wildcard /usr/include/asm/*.h) \
- \$(wildcard /usr/include/scsi/*.h)
-GCCDIR = \$(shell gcc --print-file-name include)
-
-PERLLIB = \$(D)/usr/lib/perl5/%{perlver}%{perlrel}
-PERL = PERL5LIB=\$(PERLLIB) \$(D)/usr/bin/perl
-PHDIR = \$(PERLLIB)/\${PARCH}-linux
-H2PH = \$(PERL) \$(D)/usr/bin/h2ph -d \$(PHDIR)/
-
-all: std-headers gcc-headers fix-config
-
-std-headers: \$(STDH)
- cd /usr/include && \$(H2PH) \$(STDH:/usr/include/%%=%%)
-
-gcc-headers: \$(GCCH)
- cd \$(GCCDIR) && \$(H2PH) \$(GCCH:\$(GCCDIR)/%%=%%)
-
-fix-config: \$(PHDIR)/Config.pm
- \$(PERL) -i -p -e "s|\$(D)||g;" \$<
-
-EOF
-
-#man pages
-
-# ./perl installman --man1dir=${D}/usr/share/man/man1 --man1ext=1 --man3dir=${D}/usr/share/man/man3 --man3ext=3
-
-
-# This removes ${D} from Config.pm
-
- dosed /usr/lib/perl5/${PV}/${CHOST%%-*}-linux/Config.pm
- dosed /usr/lib/perl5/${PV}/${CHOST%%-*}-linux/.packlist
-
-# DOCUMENTATION
-
- dodoc Changes* Artistic Copying README Todo* AUTHORS
- prepalldocs
-
-# HTML Documentation
-
- dodir /usr/share/doc/${PF}/html
- ./perl installhtml --recurse --htmldir=${D}/usr/share/doc/${PF}/html
-
-}
+++ /dev/null
-# Copyright 1999-2002 Gentoo Technologies, Inc.
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-devel/perl/perl-5.6.1-r5.ebuild,v 1.8 2002/10/05 05:39:26 drobbins Exp $
-
-IUSE="berkdb gdbm"
-
-S=${WORKDIR}/${P}
-DESCRIPTION="Larry Wall's Practical Extraction and Reporting Language"
-SRC_URI="ftp://ftp.perl.org/pub/CPAN/src/${P}.tar.gz"
-HOMEPAGE="http://www.perl.org"
-LICENSE="Artistic GPL-2"
-SLOT="0"
-KEYWORDS="x86 ppc sparc sparc64"
-
-DEPEND="sys-apps/groff berkdb? ( >=sys-libs/db-3.2.3h-r3 =sys-libs/db-1.85-r1 ) gdbm? ( >=sys-libs/gdbm-1.8.0 )"
-
-RDEPEND="berkdb? ( >=sys-libs/db-3.2.3h-r3 =sys-libs/db-1.85-r1 ) gdbm? ( >=sys-libs/gdbm-1.8.0 )"
-
-src_compile() {
-
- local myconf
- if [ "`use gdbm`" ]
- then
- myconf="-Di_gdbm"
- fi
- if [ "`use berkdb`" ]
- then
- myconf="${myconf} -Di_db -Di_ndbm"
- else
- myconf="${myconf} -Ui_db -Ui_ndbm"
- fi
-
- # configure for libperl.so
- sh Configure -des \
- -Darchname=${CHOST%%-*}-linux \
- -Dcccdlflags='-fPIC' \
- -Dccdlflags='-rdynamic' \
- -Dprefix=/usr \
- -Dlocincpth=' ' \
- -Doptimize="${CFLAGS}" \
- -Duselargefiles \
- -Duseshrplib \
- -Dlibperl=libperl.so \
- -Dd_dosuid \
- -Dd_semctl_semun \
- ${myconf} || die
- # add optimization flags
- cp config.sh config.sh.orig
- sed -e "s/optimize='-O2'/optimize=\'${CFLAGS}\'/" config.sh.orig > config.sh
- # create libperl.so and move it out of the way
- mv -f Makefile Makefile_orig
- sed -e 's#^CCDLFLAGS = -rdynamic -Wl,-rpath,/usr/lib/perl5/.*#CCDLFLAGS = -rdynamic#' \
- -e 's#^all: $(FIRSTMAKEFILE) #all: README #' \
- Makefile_orig > Makefile
- export PARCH=`grep myarchname config.sh | cut -f2 -d"'"`
- make -f Makefile depend || die
- mv makefile makefile_orig
- mv x2p/makefile x2p/makefile_orig
- egrep -v "(<built-in>|<command line>)" makefile_orig >makefile
- egrep -v "(<built-in>|<command line>)" x2p/makefile_orig >x2p/makefile
- make -f Makefile libperl.so || die
- mv libperl.so ${WORKDIR}
-
- # starting from scratch again
- cd ${WORKDIR}
- rm -rf ${S}
- unpack ${A}
- cd ${S}
-
- # configure for libperl.a
-# this is gross -- from Christian Gafton, Red Hat
- cat > config.over <<EOF
-installprefix=${D}/usr
-#test -d \$installprefix || mkdir \$installprefix
-#test -d \$installprefix/bin || mkdir \$installprefix/bin
-installarchlib=\`echo \$installarchlib | sed "s!\$prefix!\$installprefix!"\`
-installbin=\`echo \$installbin | sed "s!\$prefix!\$installprefix!"\`
-#installman1dir=\$installprefix/share/man/man1
-#installman3dir=\$installprefix/share/man/man3
-installman1dir=\`echo \$installman1dir | sed "s!\$prefix!\$installprefix!"\`
-installman3dir=\`echo \$installman3dir | sed "s!\$prefix!\$installprefix!"\`
-installman1dir=\`echo \$installman1dir | sed "s!/man/!/share/man/!"\`
-installman3dir=\`echo \$installman3dir | sed "s!/man/!/share/man/!"\`
-man1ext=1
-man3ext=3pm
-installprivlib=\`echo \$installprivlib | sed "s!\$prefix!\$installprefix!"\`
-installscript=\`echo \$installscript | sed "s!\$prefix!\$installprefix!"\`
-installsitelib=\`echo \$installsitelib | sed "s!\$prefix!\$installprefix!"\`
-installsitearch=\`echo \$installsitearch | sed "s!\$prefix!\$installprefix!"\`
-EOF
-
- sh Configure -des \
- -Dprefix=/usr \
- -Darchname=${CHOST%%-*}-linux \
- -Duselargefiles \
- -Dd_dosuid \
- -Dlocincpth=' ' \
- -Dd_semctl_semun \
- ${myconf} || die
-
- #Optimize ;)
- cp config.sh config.sh.orig
- sed -e "s/optimize='-O2'/optimize=\'${CFLAGS}\'/" config.sh.orig > config.sh
- #THIS IS USED LATER:
- export PARCH=`grep myarchname config.sh | cut -f2 -d"'"`
-
-# Umm, for some reason this doesn't want to work, so we'll just remove
-# the makefiles and let make rebuild them itself. (It seems to do it
-# right the second time... -- pete
-# cp makefile makefile.orig
-# sed -e "s:^0::" makefile.orig > makefile
-
- mv Makefile Makefile_orig
- sed -e 's#^all: $(FIRSTMAKEFILE) #all: README #' \
- Makefile_orig > Makefile
-
- #for some reason, this rm -f doesn't seem to actually do anything. So we explicitly use "Makefile"
- #(rather than the default "makefile") in all make commands below.
- rm -f makefile x2p/makefile
- make -f Makefile depend || die
- mv makefile makefile_orig
- mv x2p/makefile x2p/makefile_orig
- egrep -v "(<built-in>|<command line>)" makefile_orig >makefile
- egrep -v "(<built-in>|<command line>)" x2p/makefile_orig >x2p/makefile
- make -f Makefile || die
- # Parallel make fails
- # dont use the || die since some tests fail on bootstrap
- if [ `expr "$PARCH" ":" "sparc"` -gt 4 ]; then
- echo "Skipping tests on this platform"
- else
- make -f Makefile test
- fi
-}
-
-src_install() {
-
- insinto /usr/lib/perl5/${PV}/i686-linux/CORE/
- doins ${WORKDIR}/libperl.so
- dosym /usr/lib/perl5/${PV}/i686-linux/CORE/libperl.so /usr/lib/libperl.so
-
- export PARCH=`grep myarchname config.sh | cut -f2 -d"'"`
-
- make -f Makefile INSTALLMAN1DIR=${D}/usr/share/man/man1 INSTALLMAN3DIR=${D}/usr/share/man/man3 install || die
- install -m 755 utils/pl2pm ${D}/usr/bin/pl2pm
-
-make all -f - <<EOF
-STDH =\$(wildcard /usr/include/linux/*.h) \$(wildcard /usr/include/asm/*.h) \
- \$(wildcard /usr/include/scsi/*.h)
-GCCDIR = \$(shell gcc --print-file-name include)
-
-PERLLIB = \$(D)/usr/lib/perl5/%{perlver}%{perlrel}
-PERL = PERL5LIB=\$(PERLLIB) \$(D)/usr/bin/perl
-PHDIR = \$(PERLLIB)/\${PARCH}-linux
-H2PH = \$(PERL) \$(D)/usr/bin/h2ph -d \$(PHDIR)/
-
-all: std-headers gcc-headers fix-config
-
-std-headers: \$(STDH)
- cd /usr/include && \$(H2PH) \$(STDH:/usr/include/%%=%%)
-
-gcc-headers: \$(GCCH)
- cd \$(GCCDIR) && \$(H2PH) \$(GCCH:\$(GCCDIR)/%%=%%)
-
-fix-config: \$(PHDIR)/Config.pm
- \$(PERL) -i -p -e "s|\$(D)||g;" \$<
-
-EOF
-
-#man pages
-
-# ./perl installman --man1dir=${D}/usr/share/man/man1 --man1ext=1 --man3dir=${D}/usr/share/man/man3 --man3ext=3
-
-
-# This removes ${D} from Config.pm
-
- dosed /usr/lib/perl5/${PV}/${CHOST%%-*}-linux/Config.pm
- dosed /usr/lib/perl5/${PV}/${CHOST%%-*}-linux/.packlist
-
-# DOCUMENTATION
-
- dodoc Changes* Artistic Copying README Todo* AUTHORS
- prepalldocs
-
-# HTML Documentation
-
- dodir /usr/share/doc/${PF}/html
- ./perl installhtml --recurse --htmldir=${D}/usr/share/doc/${PF}/html
-
-}
# Copyright 1999-2002 Gentoo Technologies, Inc.
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-devel/perl/perl-5.6.1-r7.ebuild,v 1.3 2002/10/05 05:39:26 drobbins Exp $
+# $Header: /var/cvsroot/gentoo-x86/sys-devel/perl/perl-5.6.1-r7.ebuild,v 1.4 2002/10/13 11:57:04 seemant Exp $
IUSE="berkdb gdbm"
SLOT="0"
KEYWORDS="x86 ppc sparc sparc64"
-DEPEND="sys-apps/groff berkdb? ( >=sys-libs/db-3.2.3h-r3 =sys-libs/db-1.85-r1 ) gdbm? ( >=sys-libs/gdbm-1.8.0 )"
+RDEPEND="gdbm? ( >=sys-libs/gdbm-1.8.0 )
+ berkdb? ( >=sys-libs/db-3.2.3h-r3
+ =sys-libs/db-1.85-r1 )"
-RDEPEND="berkdb? ( >=sys-libs/db-3.2.3h-r3 =sys-libs/db-1.85-r1 ) gdbm? ( >=sys-libs/gdbm-1.8.0 )"
+DEPEND="sys-apps/groff
+ ${RDEPEND}"
src_compile() {
local myconf
if [ "`use gdbm`" ]
then
- myconf="-Di_gdbm"
+ myconf="-Di_gdbm"
fi
if [ "`use berkdb`" ]
then
- myconf="${myconf} -Di_db -Di_ndbm"
+ myconf="${myconf} -Di_db -Di_ndbm"
else
- myconf="${myconf} -Ui_db -Ui_ndbm"
+ myconf="${myconf} -Ui_db -Ui_ndbm"
fi
# configure for libperl.so
make -f Makefile depend || die
mv makefile makefile_orig
mv x2p/makefile x2p/makefile_orig
- egrep -v "(<built-in>|<command line>)" makefile_orig >makefile
- egrep -v "(<built-in>|<command line>)" x2p/makefile_orig >x2p/makefile
+ egrep -v "(<built-in>|<command line>)" makefile_orig >makefile
+ egrep -v "(<built-in>|<command line>)" x2p/makefile_orig >x2p/makefile
make -f Makefile libperl.so || die
mv libperl.so ${WORKDIR}
dosym /usr/lib/perl5/${PV}/${PARCH}/CORE/libperl.so /usr/lib/libperl.so
-# make -f Makefile INSTALLMAN1DIR=${D}/usr/share/man/man1 INSTALLMAN3DIR=${D}/usr/share/man/man3 install || die
- make DESTDIR=${D} INSTALLMAN1DIR=${D}/usr/share/man/man1 INSTALLMAN3DIR=${D}/usr/share/man/man3 install || die "Unable to make install"
+# make -f Makefile \
+# INSTALLMAN1DIR=${D}/usr/share/man/man1 \
+# INSTALLMAN3DIR=${D}/usr/share/man/man3 \
+# install || die
+
+ make \
+ DESTDIR=${D} \
+ INSTALLMAN1DIR=${D}/usr/share/man/man1 \
+ INSTALLMAN3DIR=${D}/usr/share/man/man3 \
+ install || die "Unable to make install"
install -m 755 utils/pl2pm ${D}/usr/bin/pl2pm
-#man pages
+ #man pages
-# ./perl installman --man1dir=${D}/usr/share/man/man1 --man1ext=1 --man3dir=${D}/usr/share/man/man3 --man3ext=3
+# ./perl installman \
+# --man1dir=${D}/usr/share/man/man1 \
+# --man1ext=1 \
+# --man3dir=${D}/usr/share/man/man3 \
+# --man3ext=3
-# This removes ${D} from Config.pm
+ # This removes ${D} from Config.pm
- dosed /usr/lib/perl5/${PV}/${CHOST%%-*}-linux/Config.pm
- dosed /usr/lib/perl5/${PV}/${CHOST%%-*}-linux/.packlist
+ dosed /usr/lib/perl5/${PV}/${CHOST%%-*}-linux/Config.pm
+ dosed /usr/lib/perl5/${PV}/${CHOST%%-*}-linux/.packlist
-# DOCUMENTATION
+ # DOCUMENTATION
dodoc Changes* Artistic Copying README Todo* AUTHORS
prepalldocs
-# HTML Documentation
+ # HTML Documentation
dodir /usr/share/doc/${PF}/html
./perl installhtml --recurse --htmldir=${D}/usr/share/doc/${PF}/html
--- /dev/null
+# Copyright 1999-2002 Gentoo Technologies, Inc.
+# Distributed under the terms of the GNU General Public License, v2 or later
+# $Header: /var/cvsroot/gentoo-x86/sys-devel/perl/perl-5.6.1-r8.ebuild,v 1.1 2002/10/13 11:57:04 seemant Exp $
+
+MMPV=6.05
+MMPN=ExtUtils-MakeMaker
+MMP=${MMPN}-${MMPV}
+S=${WORKDIR}/${P}
+S2=${WORKDIR}/${MMP}
+DESCRIPTION="Larry Wall's Practical Extraction and Reporting Language"
+SRC_URI="ftp://ftp.perl.org/pub/CPAN/src/${P}.tar.gz
+ http://cpan.valueclick.com/modules/by-module/ExtUtils/${MMP}.tar.gz"
+HOMEPAGE="http://www.perl.org"
+
+SLOT="0"
+LICENSE="Artistic GPL-2"
+KEYWORDS="x86 ppc sparc sparc64 alpha"
+
+
+RDEPEND="berkdb? ( >=sys-libs/db-3.2.3h-r3
+ =sys-libs/db-1.85-r1 )
+ gdbm? ( >=sys-libs/gdbm-1.8.0 )"
+
+DEPEND="sys-apps/groff
+ ${RDEPEND}"
+
+src_compile() {
+ local myconf
+
+ use gdbm && myconf="-Di_gdbm"
+
+ use berkdb \
+ && myconf="${myconf} -Di_db -Di_ndbm" \
+ || myconf="${myconf} -Ui_db -Ui_ndbm"
+
+ # configure for libperl.so
+ sh Configure -des \
+ -Darchname=${CHOST%%-*}-linux \
+ -Dcccdlflags='-fPIC' \
+ -Dccdlflags='-rdynamic' \
+ -Dprefix=/usr \
+ -Dlocincpth=' ' \
+ -Doptimize="${CFLAGS}" \
+ -Duselargefiles \
+ -Duseshrplib \
+ -Dlibperl=libperl.so \
+ -Dd_dosuid \
+ -Dd_semctl_semun \
+ ${myconf} || die
+ # add optimization flags
+ cp config.sh config.sh.orig
+ sed -e "s/optimize='-O2'/optimize=\'${CFLAGS}\'/" config.sh.orig > config.sh
+ # create libperl.so and move it out of the way
+ mv -f Makefile Makefile_orig
+ sed -e 's#^C\(CDLFLAGS = -rdynamic\) -Wl,-rpath,/usr/lib/perl5/.*#\1#' \
+ -e 's#^all: $(FIRSTMAKEFILE) #all: README #' \
+ Makefile_orig > Makefile
+ export PARCH=`grep myarchname config.sh | cut -f2 -d"'"`
+ # fixes a bug in the make/testing on new systems
+ make -f Makefile depend || die
+ mv makefile makefile_orig
+ mv x2p/makefile x2p/makefile_orig
+ egrep -v "(<built-in>|<command line>)" makefile_orig >makefile
+ egrep -v "(<built-in>|<command line>)" x2p/makefile_orig >x2p/makefile
+ make -f Makefile libperl.so || die
+ mv libperl.so ${WORKDIR}
+
+ # starting from scratch again
+ cd ${WORKDIR}
+ rm -rf ${S}
+ unpack ${P}.tar.gz
+ cd ${S}
+
+ # configure for libperl.a
+ # this is gross -- from Christian Gafton, Red Hat
+ cat > config.over <<EOF
+installprefix=${D}/usr
+#test -d \$installprefix || mkdir \$installprefix
+#test -d \$installprefix/bin || mkdir \$installprefix/bin
+installarchlib=\`echo \$installarchlib | sed "s!\$prefix!\$installprefix!"\`
+installbin=\`echo \$installbin | sed "s!\$prefix!\$installprefix!"\`
+#installman1dir=\$installprefix/share/man/man1
+#installman3dir=\$installprefix/share/man/man3
+installman1dir=\`echo \$installman1dir | sed "s!\$prefix!\$installprefix!"\`
+installman3dir=\`echo \$installman3dir | sed "s!\$prefix!\$installprefix!"\`
+installman1dir=\`echo \$installman1dir | sed "s!/man/!/share/man/!"\`
+installman3dir=\`echo \$installman3dir | sed "s!/man/!/share/man/!"\`
+man1ext=1
+man3ext=3pm
+installprivlib=\`echo \$installprivlib | sed "s!\$prefix!\$installprefix!"\`
+installscript=\`echo \$installscript | sed "s!\$prefix!\$installprefix!"\`
+installsitelib=\`echo \$installsitelib | sed "s!\$prefix!\$installprefix!"\`
+installsitearch=\`echo \$installsitearch | sed "s!\$prefix!\$installprefix!"\`
+EOF
+
+ sh Configure -des \
+ -Dprefix=/usr \
+ -Darchname=${CHOST%%-*}-linux \
+ -Duselargefiles \
+ -Dd_dosuid \
+ -Dlocincpth=' ' \
+ -Dd_semctl_semun \
+ ${myconf} || die
+
+ #Optimize ;)
+ cp config.sh config.sh.orig
+ sed -e "s/optimize='-O2'/optimize=\'${CFLAGS}\'/" config.sh.orig > config.sh
+ #THIS IS USED LATER:
+ export PARCH=`grep myarchname config.sh | cut -f2 -d"'"`
+
+# Umm, for some reason this doesn't want to work, so we'll just remove
+# the makefiles and let make rebuild them itself. (It seems to do it
+# right the second time... -- pete
+# cp makefile makefile.orig
+# sed -e "s:^0::" makefile.orig > makefile
+
+ mv Makefile Makefile_orig
+ sed -e 's#^all: $(FIRSTMAKEFILE) #all: README #' \
+ Makefile_orig > Makefile
+
+ #for some reason, this rm -f doesn't seem to actually do anything. So we explicitly use "Makefile"
+ #(rather than the default "makefile") in all make commands below.
+ rm -f makefile x2p/makefile
+ make -f Makefile depend || die
+ mv makefile makefile_orig
+ mv x2p/makefile x2p/makefile_orig
+ egrep -v "(<built-in>|<command line>)" makefile_orig >makefile
+ egrep -v "(<built-in>|<command line>)" x2p/makefile_orig >x2p/makefile
+ make -f Makefile || die
+ cp ${O}/files/stat.t ./t/op/
+ # Parallel make fails
+ # dont use the || die since some tests fail on bootstrap
+ if [ `expr "$PARCH" ":" "sparc"` -gt 4 ]; then
+ echo "Skipping tests on this platform"
+ else
+ make -f Makefile test
+ fi
+
+}
+
+src_install() {
+
+ export PARCH=`grep myarchname config.sh | cut -f2 -d"'"`
+
+ insinto /usr/lib/perl5/${PV}/${PARCH}/CORE/
+ doins ${WORKDIR}/libperl.so
+ dosym /usr/lib/perl5/${PV}/${PARCH}/CORE/libperl.so /usr/lib/libperl.so
+
+
+# make -f Makefile \
+# INSTALLMAN1DIR=${D}/usr/share/man/man1 \
+# INSTALLMAN3DIR=${D}/usr/share/man/man3 \
+# install || die
+
+ make \
+ DESTDIR=${D} \
+ INSTALLMAN1DIR=${D}/usr/share/man/man1 \
+ INSTALLMAN3DIR=${D}/usr/share/man/man3 \
+ install || die "Unable to make install"
+
+ install -m 755 utils/pl2pm ${D}/usr/bin/pl2pm
+
+
+ #man pages
+
+# ./perl installman \
+# --man1dir=${D}/usr/share/man/man1 \
+# --man1ext=1 \
+# --man3dir=${D}/usr/share/man/man3 \
+# --man3ext=3
+
+
+ # This removes ${D} from Config.pm
+ dosed /usr/lib/perl5/${PV}/${CHOST%%-*}-linux/Config.pm
+ dosed /usr/lib/perl5/${PV}/${CHOST%%-*}-linux/.packlist
+
+ # DOCUMENTATION
+ dodoc Changes* Artistic Copying README Todo* AUTHORS
+ prepalldocs
+
+ # HTML Documentation
+ dodir /usr/share/doc/${PF}/html
+ ./perl installhtml --recurse --htmldir=${D}/usr/share/doc/${PF}/html
+
+ # MakeMaker Fix
+ cd ${S2}
+ ${D}/usr/bin/perl Makefile.PL ${myconf} PREFIX=${D}/usr
+ make \
+ PREFIX=${D}/usr \
+ INSTALLMAN1DIR=${D}/usr/share/man/man1 \
+ INSTALLMAN2DIR=${D}/usr/share/man/man2 \
+ INSTALLMAN3DIR=${D}/usr/share/man/man3 \
+ INSTALLMAN4DIR=${D}/usr/share/man/man4 \
+ INSTALLMAN5DIR=${D}/usr/share/man/man5 \
+ INSTALLMAN6DIR=${D}/usr/share/man/man6 \
+ INSTALLMAN7DIR=${D}/usr/share/man/man7 \
+ INSTALLMAN8DIR=${D}/usr/share/man/man8 \
+ install || die
+}
projects / gentoo.git / commitdiff