added some debugging messages

diff --git a/comedi/drivers/das08.c b/comedi/drivers/das08.c
index 6776bd80846626f72eb621e11f5dcdc68d0497de..51a3eccbe12d539b11d4119f9ce0d239f12b7b53 100644 (file)
--- a/comedi/drivers/das08.c
+++ b/comedi/drivers/das08.c
@@ -43,8 +43,12 @@ Options (for pci-das08):
         [1] = slot (optional)
 Use the name 'pci-das08' for the pci-das08, NOT 'das08'.
 
+Options (for pcm-das08):
+        NONE
+
 The das08 driver doesn't support asynchronous commands, since
-the cheap das08 hardware doesn't really support them.  The
+the cheap das08 hardware doesn't really support them (except for
+pcm-das08).  The
 comedi_rt_timer driver can be used to emulate commands for this
 driver.
 */
@@ -725,12 +729,12 @@ static int das08_attach(comedi_device *dev,comedi_devconfig *it)
        if((ret=alloc_private(dev,sizeof(struct das08_private_struct)))<0)
                return ret;
 
-       printk("comedi%d: das08", dev->minor);
+       printk("comedi%d: das08: ", dev->minor);
        // deal with a pci board
        if(thisboard->bustype == pci)
        {
                if(it->options[0] || it->options[1]){
-                       printk(": bus %i, slot %i",
+                       printk("bus %i slot %i ",
                                it->options[0], it->options[1]);
                }
                printk("\n");
@@ -763,7 +767,7 @@ static int das08_attach(comedi_device *dev,comedi_devconfig *it)
                pci_iobase = pdev->resource[1].start & PCI_BASE_ADDRESS_IO_MASK;
                iobase = pdev->resource[2].start & PCI_BASE_ADDRESS_IO_MASK;
 #endif
-
+               printk("pcibase 0x%x ", pci_iobase);
                // reserve io ports for 9052 pci chip
                if(check_region(pci_iobase,PCIDAS08_SIZE)<0){
                        printk(" I/O port conflict\n");
@@ -796,12 +800,12 @@ static int das08_attach(comedi_device *dev,comedi_devconfig *it)
 #endif // CONFIG_PCMCIA
        }else{
                iobase = it->options[0];
-               printk(": 0x%04x\n", iobase);
        }
 
        // allocate ioports for non-pcmcia boards
        if(thisboard->bustype != pcmcia)
        {
+               printk("iobase 0x%x ", iobase);
                if(check_region(iobase,DAS08_SIZE)<0){
                        printk(" I/O port conflict\n");
                        return -EIO;
@@ -810,6 +814,8 @@ static int das08_attach(comedi_device *dev,comedi_devconfig *it)
        }
        dev->iobase = iobase;
 
+       printk("\n");
+
        dev->board_name = thisboard->name;
 
        dev->n_subdevices=5;