DIST xen-security-patches-1.tar.gz 7040 SHA256 30733e9ca71bf4291ff212eb191afb22687ccd9b2579767fe0ee013152980c76 SHA512 89c72897f18a86c2060bb76a182e7cca72ad2f33a3aab964ecae66e057aeecafee2e9986204d6feb98f81ccb740460ee2cb37663b1ab79f47adc1dd73e0091bc WHIRLPOOL c27e612b87b4a30abbf59e6be019e2c21a78bfbdf1715da5498d95607d390d616251768d419ac5ce76087bbf7cdfc410dd0088ba48e425082cea971efcb64346
DIST xen-security-patches-2.tar.gz 7370 SHA256 f24bf4b0cba29b51ee71f6ef82654cddf157c63d62fc1119f17255b2388e03ab SHA512 209dea670467ff1df18428c15b25229c05d676d1a2f646cddb221544ae888241ade48a22be037f97dce249ac322c1f30bb477675e5e2cc04a2fbd839e02f1f57 WHIRLPOOL ae66a2fbc0d0f0a555d407ebd3198fa58ee043515fb9821d7b9eda46d088bc87b3de16fe015fd1142294429dd2c1c7826e414a55980e27123185c1a86fb0a8a6
DIST xen-security-patches-4.tar.gz 7731 SHA256 b51c6616a303b4d5123fed1e58240163c8e0cf8e0de32db58c11a40a48124d52 SHA512 cef89bb68bdb4a5f947d6be8ae7a799276fd187e396c5ba85f8aa2b0b5349ba606d3742d5b8d8212df6da38f8af9711416d9a25176e713240a0a7f2194d84fc5 WHIRLPOOL 912dc869fa4eb355a86023133adcb818e87f4979d537a885b3f1c6e35ff141b7d7a33e81105dcddf34aafa4c306df79a210346f5037337173923e1dc8280ac47
+DIST xen-security-patches-5.tar.gz 8716 SHA256 afd114f2cb1b623ac1709d75c771006f91b5b2a0a0695f4da3d6aa6f6b340d9f SHA512 f2276759cb418e252052701f5e41e626e1d232098bd7e393e7e58286d356ef33f249c2f9d7b5b1219279de7c4c66832f0d4f761d36bc51e7c10cea973dd9882e WHIRLPOOL 18cb29a0fde10f1bac698c577713db1307c02408778b5d128a4f017ae8be6fba893feb9b8f09fe2d8164dc761d136190d1dbee8a3eb4caa35d8bf976a498d405
+DIST xen-security-patches-6.tar.gz 8308 SHA256 b0dc1df6b27073a83b12a17a04a01e74af8c19a1c96d9dda580bb738eaab25f3 SHA512 b9155eef3f18e47288a6a6bb570a073d4c84449fe11fbac4c35cceaa4f7c06624597f63a8768bddd735c345b8c430aeee18b71f43e9b188de3cfa0cbf608dc0a WHIRLPOOL 9933ed07a2419170070a9eedfda200ec5ebef67b6b98c1b435793008c126347cdc8c0ef9ff2cb4fe0b7333ff51211545a3fe2ff726ca7c22d46f231d6d1e82aa
DIST xen-upstream-patches-0.tar.gz 2297 SHA256 bf21272ad029391d30bf31896efcadc75267538f6c7de5d239453f19659d58ee SHA512 3f5d60aaebd181bddab4dd02e0064de2f75672f44a687a7331fa40e81d56763fea84504081a449d11403b21ad0ba2dac075f0b1796809ef8d16e244f6be99e3d WHIRLPOOL 4ebe79c8f2ea1c45e88e59941e477ed5639dbca3fe95c9a67e07afb0f4b6fb8b7fea8e58422d7c8f906299e4f37c14b4db15200997e5a92b647df98fa93e10c7
--- /dev/null
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+
+PYTHON_COMPAT=( python2_7 )
+
+inherit eutils multilib mount-boot flag-o-matic python-any-r1 toolchain-funcs
+
+MY_PV=${PV/_/-}
+MY_P=${PN}-${PV/_/-}
+
+if [[ $PV == *9999 ]]; then
+ inherit git-r3
+ KEYWORDS=""
+ EGIT_REPO_URI="git://xenbits.xen.org/${PN}.git"
+ SRC_URI=""
+else
+ KEYWORDS="~amd64 ~arm ~arm64 -x86"
+ UPSTREAM_VER=
+ SECURITY_VER=0
+ # var set to reflect https://dev.gentoo.org/~idella4/
+ SEC_VER=6
+ GENTOO_VER=
+
+ [[ -n ${UPSTREAM_VER} ]] && \
+ UPSTREAM_PATCHSET_URI="https://dev.gentoo.org/~dlan/distfiles/${P}-upstream-patches-${UPSTREAM_VER}.tar.xz"
+ [[ -n ${SECURITY_VER} ]] && \
+ SECURITY_PATCHSET_URI="https://dev.gentoo.org/~idella4/distfiles/${PN/-tools}-security-patches-${SECURITY_VER}.tar.xz
+ https://dev.gentoo.org/~idella4/distfiles/${PN/-tools}-security-patches-${SEC_VER}.tar.gz"
+ [[ -n ${GENTOO_VER} ]] && \
+ GENTOO_PATCHSET_URI="https://dev.gentoo.org/~dlan/distfiles/${PN}-gentoo-patches-${GENTOO_VER}.tar.xz"
+ SRC_URI="http://bits.xensource.com/oss-xen/release/${MY_PV}/${MY_P}.tar.gz
+ ${UPSTREAM_PATCHSET_URI}
+ ${SECURITY_PATCHSET_URI}
+ ${GENTOO_PATCHSET_URI}"
+
+fi
+
+DESCRIPTION="The Xen virtual machine monitor"
+HOMEPAGE="http://xen.org/"
+LICENSE="GPL-2"
+SLOT="0"
+IUSE="custom-cflags debug efi flask xsm"
+
+DEPEND="${PYTHON_DEPS}
+ efi? ( >=sys-devel/binutils-2.22[multitarget] )
+ !efi? ( >=sys-devel/binutils-2.22[-multitarget] )"
+RDEPEND=""
+PDEPEND="~app-emulation/xen-tools-${PV}"
+
+RESTRICT="test"
+
+# Approved by QA team in bug #144032
+QA_WX_LOAD="boot/xen-syms-${PV}"
+
+REQUIRED_USE="flask? ( xsm )
+ arm? ( debug )"
+
+S="${WORKDIR}/${MY_P}"
+
+pkg_setup() {
+ python-any-r1_pkg_setup
+ if [[ -z ${XEN_TARGET_ARCH} ]]; then
+ if use x86 && use amd64; then
+ die "Confusion! Both x86 and amd64 are set in your use flags!"
+ elif use x86; then
+ export XEN_TARGET_ARCH="x86_32"
+ elif use amd64; then
+ export XEN_TARGET_ARCH="x86_64"
+ elif use arm; then
+ export XEN_TARGET_ARCH="arm32"
+ elif use arm64; then
+ export XEN_TARGET_ARCH="arm64"
+ else
+ die "Unsupported architecture!"
+ fi
+ fi
+
+ if use flask ; then
+ export "XSM_ENABLE=y"
+ export "FLASK_ENABLE=y"
+ elif use xsm ; then
+ export "XSM_ENABLE=y"
+ fi
+}
+
+src_prepare() {
+ # Upstream's patchset
+ if [[ -n ${UPSTREAM_VER} ]]; then
+ EPATCH_SUFFIX="patch" \
+ EPATCH_FORCE="yes" \
+ EPATCH_OPTS="-p1" \
+ epatch "${WORKDIR}"/patches-upstream
+ fi
+
+ if [[ -n ${SECURITY_VER} ]]; then
+ einfo "Try to apply Xen Security patcheset"
+ # apply main xen patches
+ # Two parallel systems, both work side by side
+ # Over time they may concdense into one. This will suffice for now
+ EPATCH_SUFFIX="patch"
+ EPATCH_FORCE="yes"
+ for i in ${XEN_SECURITY_MAIN}; do
+ epatch "${WORKDIR}"/patches-security/xen/$i
+ done
+
+ for i in "${WORKDIR}"/xen-sec/xsa*.patch; do
+ epatch $i
+ done
+ fi
+
+ # Gentoo's patchset
+ if [[ -n ${GENTOO_VER} ]]; then
+ EPATCH_SUFFIX="patch" \
+ EPATCH_FORCE="yes" \
+ epatch "${WORKDIR}"/patches-gentoo
+ fi
+
+ # Drop .config
+ sed -e '/-include $(XEN_ROOT)\/.config/d' -i Config.mk || die "Couldn't drop"
+
+ if use efi; then
+ epatch "${FILESDIR}"/${PN}-4.5-efi.patch
+ export EFI_VENDOR="gentoo"
+ export EFI_MOUNTPOINT="boot"
+ fi
+
+ # if the user *really* wants to use their own custom-cflags, let them
+ if use custom-cflags; then
+ einfo "User wants their own CFLAGS - removing defaults"
+ # try and remove all the default custom-cflags
+ find "${S}" -name Makefile -o -name Rules.mk -o -name Config.mk -exec sed \
+ -e 's/CFLAGS\(.*\)=\(.*\)-O3\(.*\)/CFLAGS\1=\2\3/' \
+ -e 's/CFLAGS\(.*\)=\(.*\)-march=i686\(.*\)/CFLAGS\1=\2\3/' \
+ -e 's/CFLAGS\(.*\)=\(.*\)-fomit-frame-pointer\(.*\)/CFLAGS\1=\2\3/' \
+ -e 's/CFLAGS\(.*\)=\(.*\)-g3*\s\(.*\)/CFLAGS\1=\2 \3/' \
+ -e 's/CFLAGS\(.*\)=\(.*\)-O2\(.*\)/CFLAGS\1=\2\3/' \
+ -i {} \; || die "failed to re-set custom-cflags"
+ fi
+
+ # remove -Werror for gcc-4.6's sake
+ find "${S}" -name 'Makefile*' -o -name '*.mk' -o -name 'common.make' | \
+ xargs sed -i 's/ *-Werror */ /'
+ # not strictly necessary to fix this
+ sed -i 's/, "-Werror"//' "${S}/tools/python/setup.py" || die "failed to re-set setup.py"
+
+ epatch_user
+}
+
+src_configure() {
+ use arm && myopt="${myopt} CONFIG_EARLY_PRINTK=sun7i"
+
+ use debug && myopt="${myopt} debug=y"
+
+ if use custom-cflags; then
+ filter-flags -fPIE -fstack-protector
+ replace-flags -O3 -O2
+ else
+ unset CFLAGS
+ fi
+}
+
+src_compile() {
+ # Send raw LDFLAGS so that --as-needed works
+ emake V=1 CC="$(tc-getCC)" LDFLAGS="$(raw-ldflags)" LD="$(tc-getLD)" -C xen ${myopt}
+}
+
+src_install() {
+ local myopt
+ use debug && myopt="${myopt} debug=y"
+
+ # The 'make install' doesn't 'mkdir -p' the subdirs
+ if use efi; then
+ mkdir -p "${D}"${EFI_MOUNTPOINT}/efi/${EFI_VENDOR} || die
+ fi
+
+ emake LDFLAGS="$(raw-ldflags)" DESTDIR="${D}" -C xen ${myopt} install
+}
+
+pkg_postinst() {
+ elog "Official Xen Guide and the unoffical wiki page:"
+ elog " https://wiki.gentoo.org/wiki/Xen"
+ elog " http://en.gentoo-wiki.com/wiki/Xen/"
+
+ use efi && einfo "The efi executable is installed in boot/efi/gentoo"
+
+ elog "You can optionally block the installation of /boot/xen-syms by an entry"
+ elog "in folder /etc/portage/env using the portage's feature INSTALL_MASK"
+ elog "e.g. echo ${msg} > /etc/portage/env/xen.conf"
+}
--- /dev/null
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+
+PYTHON_COMPAT=( python2_7 )
+
+inherit eutils multilib mount-boot flag-o-matic python-any-r1 toolchain-funcs
+
+MY_PV=${PV/_/-}
+MY_P=${PN}-${PV/_/-}
+
+if [[ $PV == *9999 ]]; then
+ inherit git-r3
+ KEYWORDS=""
+ EGIT_REPO_URI="git://xenbits.xen.org/xen.git"
+ SRC_URI=""
+else
+ KEYWORDS="~amd64 ~arm ~arm64 -x86"
+ UPSTREAM_VER=0
+ SECURITY_VER=0
+ # var set to reflect https://dev.gentoo.org/~idella4/
+ # first instance of UPS_VER (usptream ver)
+ UPS_VER=0
+ SEC_VER=5
+ GENTOO_VER=
+
+ [[ -n ${UPSTREAM_VER} ]] && \
+ UPSTREAM_PATCHSET_URI="https://dev.gentoo.org/~dlan/distfiles/${P}-upstream-patches-${UPSTREAM_VER}.tar.xz
+ https://dev.gentoo.org/~idella4/distfiles/${PN}-upstream-patches-${UPS_VER}.tar.gz"
+ [[ -n ${SECURITY_VER} ]] && \
+ SECURITY_PATCHSET_URI="https://dev.gentoo.org/~idella4/distfiles/${PN/-tools}-security-patches-${SECURITY_VER}.tar.xz
+ https://dev.gentoo.org/~idella4/distfiles/${PN}-security-patches-${SEC_VER}.tar.gz"
+ [[ -n ${GENTOO_VER} ]] && \
+ GENTOO_PATCHSET_URI="https://dev.gentoo.org/~dlan/distfiles/${PN}-gentoo-patches-${GENTOO_VER}.tar.xz"
+ SRC_URI="http://bits.xensource.com/oss-xen/release/${MY_PV}/${MY_P}.tar.gz
+ ${UPSTREAM_PATCHSET_URI}
+ ${SECURITY_PATCHSET_URI}
+ ${GENTOO_PATCHSET_URI}"
+fi
+
+DESCRIPTION="The Xen virtual machine monitor"
+HOMEPAGE="http://xen.org/"
+LICENSE="GPL-2"
+SLOT="0"
+IUSE="custom-cflags debug efi flask"
+
+DEPEND="${PYTHON_DEPS}
+ efi? ( >=sys-devel/binutils-2.22[multitarget] )
+ !efi? ( >=sys-devel/binutils-2.22 )"
+RDEPEND=""
+PDEPEND="~app-emulation/xen-tools-${PV}"
+
+# no tests are available for the hypervisor
+# prevent the silliness of /usr/lib/debug/usr/lib/debug files
+# prevent stripping of the debug info from the /usr/lib/debug/xen-syms
+RESTRICT="test splitdebug strip"
+
+# Approved by QA team in bug #144032
+QA_WX_LOAD="boot/xen-syms-${PV}"
+
+REQUIRED_USE="arm? ( debug )"
+
+S="${WORKDIR}/${MY_P}"
+
+pkg_setup() {
+ python-any-r1_pkg_setup
+ if [[ -z ${XEN_TARGET_ARCH} ]]; then
+ if use amd64; then
+ export XEN_TARGET_ARCH="x86_64"
+ elif use arm; then
+ export XEN_TARGET_ARCH="arm32"
+ elif use arm64; then
+ export XEN_TARGET_ARCH="arm64"
+ else
+ die "Unsupported architecture!"
+ fi
+ fi
+
+ if use flask ; then
+ export "XSM_ENABLE=y"
+ export "FLASK_ENABLE=y"
+ fi
+}
+
+src_prepare() {
+ # Upstream's patchset
+ if [[ -n ${UPSTREAM_VER} ]]; then
+ EPATCH_SUFFIX="patch" \
+ EPATCH_FORCE="yes" \
+ EPATCH_OPTS="-p1" \
+ epatch "${WORKDIR}"/patches-upstream \
+ "${WORKDIR}"/libexec.patch
+ fi
+
+ if [[ -n ${SECURITY_VER} ]]; then
+ einfo "Try to apply Xen Security patcheset"
+ # apply main xen patches
+ # Two parallel systems, both work side by side
+ # Over time they may concdense into one. This will suffice for now
+ EPATCH_SUFFIX="patch"
+ EPATCH_FORCE="yes"
+ for i in ${XEN_SECURITY_MAIN}; do
+ epatch "${WORKDIR}"/patches-security/xen/$i
+ done
+
+ for i in "${WORKDIR}"/xen-sec/xsa*.patch; do
+ epatch $i
+ done
+ fi
+
+ # Gentoo's patchset
+ if [[ -n ${GENTOO_VER} ]]; then
+ EPATCH_SUFFIX="patch" \
+ EPATCH_FORCE="yes" \
+ epatch "${WORKDIR}"/patches-gentoo
+ fi
+
+ epatch "${FILESDIR}"/${PN}-4.6-efi.patch
+
+ # Drop .config
+ sed -e '/-include $(XEN_ROOT)\/.config/d' -i Config.mk || die "Couldn't drop"
+
+ if use efi; then
+ export EFI_VENDOR="gentoo"
+ export EFI_MOUNTPOINT="boot"
+ fi
+
+ # if the user *really* wants to use their own custom-cflags, let them
+ if use custom-cflags; then
+ einfo "User wants their own CFLAGS - removing defaults"
+ # try and remove all the default custom-cflags
+ find "${S}" -name Makefile -o -name Rules.mk -o -name Config.mk -exec sed \
+ -e 's/CFLAGS\(.*\)=\(.*\)-O3\(.*\)/CFLAGS\1=\2\3/' \
+ -e 's/CFLAGS\(.*\)=\(.*\)-march=i686\(.*\)/CFLAGS\1=\2\3/' \
+ -e 's/CFLAGS\(.*\)=\(.*\)-fomit-frame-pointer\(.*\)/CFLAGS\1=\2\3/' \
+ -e 's/CFLAGS\(.*\)=\(.*\)-g3*\s\(.*\)/CFLAGS\1=\2 \3/' \
+ -e 's/CFLAGS\(.*\)=\(.*\)-O2\(.*\)/CFLAGS\1=\2\3/' \
+ -i {} \; || die "failed to re-set custom-cflags"
+ fi
+
+ # remove -Werror for gcc-4.6's sake
+ find "${S}" -name 'Makefile*' -o -name '*.mk' -o -name 'common.make' | \
+ xargs sed -i 's/ *-Werror */ /'
+ # not strictly necessary to fix this
+ sed -i 's/, "-Werror"//' "${S}/tools/python/setup.py" || die "failed to re-set setup.py"
+
+ epatch_user
+}
+
+src_configure() {
+ use arm && myopt="${myopt} CONFIG_EARLY_PRINTK=sun7i"
+
+ use debug && myopt="${myopt} debug=y"
+
+ if use custom-cflags; then
+ filter-flags -fPIE -fstack-protector
+ replace-flags -O3 -O2
+ else
+ unset CFLAGS
+ unset LDFLAGS
+ unset ASFLAGS
+ fi
+}
+
+src_compile() {
+ # Send raw LDFLAGS so that --as-needed works
+ emake V=1 CC="$(tc-getCC)" LDFLAGS="$(raw-ldflags)" LD="$(tc-getLD)" -C xen ${myopt}
+}
+
+src_install() {
+ local myopt
+ use debug && myopt="${myopt} debug=y"
+
+ # The 'make install' doesn't 'mkdir -p' the subdirs
+ if use efi; then
+ mkdir -p "${D}"${EFI_MOUNTPOINT}/efi/${EFI_VENDOR} || die
+ fi
+
+ emake LDFLAGS="$(raw-ldflags)" DESTDIR="${D}" -C xen ${myopt} install
+
+ # make install likes to throw in some extra EFI bits if it built
+ use efi || rm -rf "${D}/usr/$(get_libdir)/efi"
+}
+
+pkg_postinst() {
+ elog "Official Xen Guide and the unoffical wiki page:"
+ elog " https://wiki.gentoo.org/wiki/Xen"
+ elog " http://en.gentoo-wiki.com/wiki/Xen/"
+
+ use efi && einfo "The efi executable is installed in boot/efi/gentoo"
+
+ elog "You can optionally block the installation of /boot/xen-syms by an entry"
+ elog "in folder /etc/portage/env using the portage's feature INSTALL_MASK"
+ elog "e.g. echo ${msg} > /etc/portage/env/xen.conf"
+}
projects / gentoo.git / commitdiff