--- /dev/null
+
+#
+# add these lines to /etc/conf.modules
+#
+
+alias char-major-98 comedi
+post-install comedi /etc/comedi.conf
+
+#alias char-major-98-0 your_driver
+#post-install your_driver /usr/sbin/comedi_config /dev/comedi0 your_driver options
+
--- /dev/null
+#!/bin/sh
+# Configuration for das1600 driver
+# Thomas Henkel and ds
+
+### Device file
+DEVICE=/dev/comedi0
+
+
+### Type of board
+### Choose one
+BOARD=das1601/12
+#BOARD=das1602/12
+#BOARD=das1602/16
+
+
+### Option 0: Board base address
+### Depends on jumper settings
+IO_BASE=0x320
+
+
+### Option 1: IRQ
+### Choose one
+#IRQ=0 # don't use interrupts
+#IRQ=3
+#IRQ=4
+#IRQ=5
+#IRQ=6
+IRQ=7
+#IRQ=9
+
+
+### Option 2: DMA channel
+### Depends on jumper settings
+### Choose one
+DMA=0 # don't use DMA
+#DMA=1
+#DMA=2
+#DMA=3
+
+
+### Option 3: Crystal selection
+### Depends on jumper settings
+### Choose one
+CRYSTAL=0 # 10 Mhz
+#CRYSTAL=1 # 1 Mhz
+
+
+### Option 4: Analog Input reference
+### Depends on jumper settings
+### Choose one
+A_INP_TYPE=0 # differential
+#A_INP_TYPE=1 # single ended
+
+
+### Option 5: Analog Input range
+### Depends on jumper settings
+### Choose one
+#A_INP_RANGE=0 # bipolar (-10 V -- +10 V)
+#A_INP_RANGE=1 # unipolar (0 V -- +10 V)
+
+
+### Option 6: Analog Output 0 Range
+### Depends on jumper settings
+### Choose one
+#A_OUT_0=0 # bipolar +/- 10 V
+#A_OUT_0=1 # bipolar +/- 5 V
+#A_OUT_0=2 # bipolar external reference
+#A_OUT_0=3 # unipolar 0-10 V
+#A_OUT_0=4 # unipolar 0-5 V
+#A_OUT_0=5 # unipolar external reference
+
+
+### Option 7: Analog Output 1 Range
+### Depends on jumper settings
+### Choose one
+#A_OUT_1=0 # bipolar +/- 10 V
+#A_OUT_1=1 # bipolar +/- 5 V
+#A_OUT_1=2 # bipolar external reference
+#A_OUT_1=3 # unipolar 0-10 V
+#A_OUT_1=4 # unipolar 0-5 V
+#A_OUT_1=5 # unipolar external reference
+
+#-----------------------------------------------------------
+# End of Configuration
+#-----------------------------------------------------------
+
+
+/usr/sbin/comedi_config $DEVICE $BOARD $IO_BASE,$IRQ,$DMA,$CRYSTAL,$A_INP_TYPE,$A_INP_RANGE,$A_OUT_0,$A_OUT_1
+
--- /dev/null
+#!/bin/sh
+# Configuration for dt282x driver
+# ds
+
+### Device file
+DEVICE=/dev/comedi0
+
+
+### Type of board
+### Choose one
+BOARD=dt2821 # also for -f-16se, -g-16se, etc.
+#BOARD=dt2823
+#BOARD=dt2824-pgh
+#BOARD=dt2824-pgl
+#BOARD=dt2825
+#BOARD=dt2827
+#BOARD=dt2828
+#BOARD=dt21-ez
+#BOARD=dt23-ez
+#BOARD=dt24-ez
+#BOARD=dt24-ez-pgl
+
+
+### Option 0: Board base address
+### Depends on jumper settings
+IOBASE=0x240
+
+
+### Option 1: IRQ
+### Depends on jumper settings
+### Choose one
+#IRQ=0 # don't use interrupts
+#IRQ=3
+#IRQ=5
+IRQ=7
+#IRQ=10
+#IRQ=15
+
+
+### Option 2: first DMA channel
+### Depends on jumper settings
+### Choose one
+DMA1=0 # don't use DMA
+#DMA1=5
+#DMA1=6
+
+
+### Option 3: second DMA channel
+### Depends on jumper settings
+### Choose one
+DMA2=0 # don't use secondary DMA
+#DMA2=6
+#DMA2=7
+
+
+### Option 4: Analog Input reference
+### Depends on jumper settings or type of board
+### Choose one
+AI_REF=0 # differential
+#AI_REF=1 # single ended
+
+
+### Option 5: Analog Input encoding
+### Depends on jumper settings
+### Choose one
+AI_ENCODE=0 # straight binary
+#AI_ENCODE=1 # two's complement
+
+
+### Option 6: Analog Output 0 encoding
+### Depends on jumper settings
+### Choose one
+A00_ENCODE=0 # straight binary
+#AO0_ENCODE=1 # two's complement
+
+
+### Option 7: Analog Output 1 encoding
+### Depends on jumper settings
+### Choose one
+AO1_ENCODE=0 # straight binary
+#AO1_ENCODE=1 # two's complement
+
+
+### Option 8: Analog Input Range
+### Depends on jumper settings
+### Choose one
+#AI_RANGE=0 # bipolar +/- 10 V
+#AI_RANGE=1 # unipolar 0-10 V
+#AI_RANGE=2 # bipolar +/- 5 V
+#AI_RANGE=3 # unipolar 0-5 V
+
+
+### Option 9: Analog Output 0 Range
+### Depends on jumper settings
+### Choose one
+#AO0_RANGE=0 # bipolar +/- 10 V
+#AO0_RANGE=1 # unipolar 0-10 V
+#AO0_RANGE=2 # bipolar +/- 5 V
+#AO0_RANGE=3 # unipolar 0-5 V
+#AO0_RANGE=4 # bipolar +/- 2.5 V
+
+
+### Option 10: Analog Output 1 Range
+### Depends on jumper settings
+### Choose one
+#AO1_RANGE=0 # bipolar +/- 10 V
+#AO1_RANGE=1 # unipolar 0-10 V
+#AO1_RANGE=2 # bipolar +/- 5 V
+#AO1_RANGE=3 # unipolar 0-5 V
+#AO1_RANGE=4 # bipolar +/- 2.5 V
+
+
+#-----------------------------------------------------------
+# End of Configuration
+#-----------------------------------------------------------
+
+
+/usr/sbin/comedi_config $DEVICE $BOARD $IOBASE,$IRQ,$DMA1,$DMA2,$AI_REF,$AI_ENCODE,$AO0_ENCODE,$AO1_ENCODE,$AI_REF,$AO0_REF,$AI1_REF
+
--- /dev/null
+#! /bin/sh
+
+if [ -r ./shared ] ; then . ./shared ; else . /etc/pcmcia/shared ; fi
+
+# Get device attributes
+get_info $DEVICE
+
+# Load site-specific settings
+start_fn () { return; }
+stop_fn () { return; }
+. $0.opts
+
+case "$ACTION" in
+
+'start')
+
+ #echo /usr/sbin/comedi_config /dev/comedi0 $2
+ /usr/sbin/comedi_config /dev/comedi0 $2
+
+ start_fn $DEVICE
+ ;;
+
+'stop')
+
+ stop_fn $DEVICE
+
+ ;;
+
+'check')
+ ;;
+
+'cksum')
+ ;;
+
+'restart')
+ ;;
+
+'suspend'|'resume')
+ ;;
+
+*)
+ usage
+ ;;
+
+esac
+
+exit 0
+
+
+
--- /dev/null
+
+device "ni_mio_cs"
+ class "comedi" module "ni_mio_cs"
+
+device "quatech_daqp_cs"
+ class "comedi" module "quatech_daqp_cs"
+
+
+card "National Instruments DAQCard-AI-16XE-50"
+# version "National Instruments", "*", "DAQCard-AI-16XE-50"
+ manfid 0x10b, 0x010d
+ bind "ni_mio_cs"
+
+card "National Instruments DAQCard-AI-16E-4"
+## version "National Instruments", "*", "DAQCard-AI-16E-4"
+ manfid 0x10b, 0x010c
+ bind "ni_mio_cs"
+
+card "National Instruments DAQCard-6062E"
+# version "National Instruments", "*", "DAQCard-6062E"
+ manfid 0x10b, 0x02c4
+ bind "ni_mio_cs"
+
+card "Quatech DAQP-308 16-bit Analog Input/Output"
+ manfid 0x0137, 0x0027
+ bind "quatech_daqp_cs"
+
projects / comedilib.git / commitdiff