hooke.git
9 years agoMore detailed misnamed column error in ColumnAccessCommand._get_column
W. Trevor King [Wed, 11 Aug 2010 22:06:56 +0000 (18:06 -0400)]
More detailed misnamed column error in ColumnAccessCommand._get_column

9 years agoFix '@Sens. ZSensorSens' KeyError loading picoforce 0x07200000 curves.
W. Trevor King [Wed, 11 Aug 2010 21:48:26 +0000 (17:48 -0400)]
Fix '@Sens. ZSensorSens' KeyError loading picoforce 0x07200000 curves.

Regression from 93e0e4284534.  Of course, we still don't know where
the z-data is in the 0x07200000 curves,
  http://code.google.com/p/hooke/issues/detail?id=26#c4
so its hard to know if this is the right sensitivity.  It doesn't
crash anyway...

9 years agoUpdated FlatPeaksCommand to ColumnAddingCommand.
W. Trevor King [Wed, 11 Aug 2010 21:11:18 +0000 (17:11 -0400)]
Updated FlatPeaksCommand to ColumnAddingCommand.

9 years agoUpdated vclamp to use new ColumnAddingCommand.
W. Trevor King [Wed, 11 Aug 2010 20:25:47 +0000 (16:25 -0400)]
Updated vclamp to use new ColumnAddingCommand.

Also added 'ignore after last peak info name' argument to
SurfaceContactCommand"

This allows for the two-cycle surface detection mentioned in commit
725a18055518.

  ./bin/hooke -c 'load_playlist test/data/vclamp_wtk/playlist'
              -c 'zero_surface_contact_point --block retract'
              -c 'flat_filter_peaks --block retract --min_points 1'
              -c 'zero_surface_contact_point --block retract
              --ignore_after_last_peak_info_name "flat filter peaks"'
              -c 'convert_distance_to_force --block retract'
              -c 'remove_cantilever_from_extension --block retract'
              -c 'flat_peaks_to_polymer_peaks --block retract'
              -c 'polymer_fit_peaks --block retract' --command-no-exit

Note that `flat filter peaks`, `flat peaks to polymer peaks`, and
`polymer fit peaks` still need to be updated to ColumnAddingCommand
subclasses.  Also, I might be missing a few column renames in the
above command.  I'll include a working (and tested) command once I get
the other plugins up to speed with ColumnAddingCommand.

9 years agoAdd CurveCommand, BlockCommand, ColumnAccessCommand, and ColumnAddingCommand.
W. Trevor King [Wed, 11 Aug 2010 18:09:22 +0000 (14:09 -0400)]
Add CurveCommand, BlockCommand, ColumnAccessCommand, and ColumnAddingCommand.

Added to hooke.plugin.curve.  These abstract out the boring
bookkeeping from many commands (so far only the ones in plugin.curve).

Also add test/derivative.py and rework hooke.util.calculus.derivative
to be less block-centric.

9 years agoAdd test/difference.py
W. Trevor King [Wed, 11 Aug 2010 17:45:22 +0000 (13:45 -0400)]
Add test/difference.py

9 years agoAdd test/export_block.py
W. Trevor King [Wed, 11 Aug 2010 17:37:29 +0000 (13:37 -0400)]
Add test/export_block.py

9 years agoAdd test/delta.py
W. Trevor King [Wed, 11 Aug 2010 17:25:46 +0000 (13:25 -0400)]
Add test/delta.py

9 years agoAdd test/get_curve.py
W. Trevor King [Wed, 11 Aug 2010 17:23:12 +0000 (13:23 -0400)]
Add test/get_curve.py

9 years agoRemove outdated type TODOs from hooke/command (conversion handled by UIs).
W. Trevor King [Wed, 11 Aug 2010 17:20:10 +0000 (13:20 -0400)]
Remove outdated type TODOs from hooke/command (conversion handled by UIs).

9 years agoPrint tutorial init message to stderr so it won't interfere with doctests.
W. Trevor King [Wed, 11 Aug 2010 17:19:05 +0000 (13:19 -0400)]
Print tutorial init message to stderr so it won't interfere with doctests.

e.g.
  nosetests --with-doctest --doctest-tests test/curve_info.py

9 years agoAllow fallback to XeX notation for efor extreme powers in ppSI
W. Trevor King [Wed, 11 Aug 2010 13:58:09 +0000 (09:58 -0400)]
Allow fallback to XeX notation for efor extreme powers in ppSI

9 years agoRemove post-fit L/N conversions from polymer_fit.py (handled in .fit() now).
W. Trevor King [Wed, 11 Aug 2010 13:57:19 +0000 (09:57 -0400)]
Remove post-fit L/N conversions from polymer_fit.py (handled in .fit() now).

9 years agoAdd 'ignore index' argument to SurfaceContactCommand
W. Trevor King [Wed, 11 Aug 2010 13:46:02 +0000 (09:46 -0400)]
Add 'ignore index' argument to SurfaceContactCommand

9 years agoWe don't seem to need to guess the scale in SurfacePositionModel
W. Trevor King [Wed, 11 Aug 2010 13:31:58 +0000 (09:31 -0400)]
We don't seem to need to guess the scale in SurfacePositionModel

9 years agoUpdate ModelFitters in polymer_fit.py to match new diag/scale interpretation.
W. Trevor King [Wed, 11 Aug 2010 13:30:28 +0000 (09:30 -0400)]
Update ModelFitters in polymer_fit.py to match new diag/scale interpretation.

9 years agoUpdate SurfacePositionModel to match new diag/scale interpretation.
W. Trevor King [Wed, 11 Aug 2010 13:12:27 +0000 (09:12 -0400)]
Update SurfacePositionModel to match new diag/scale interpretation.

9 years agoOops, correct my faulty interpretation of leastsq's 'diag' argument in fit.py
W. Trevor King [Wed, 11 Aug 2010 13:11:36 +0000 (09:11 -0400)]
Oops, correct my faulty interpretation of leastsq's 'diag' argument in fit.py

9 years agoAdd TranslateFlatPeaksCommand.
W. Trevor King [Tue, 10 Aug 2010 20:32:31 +0000 (16:32 -0400)]
Add TranslateFlatPeaksCommand.

This completes a simple velocity clamp force analysis approach.  Consider:

  ./bin/hooke -c 'load_playlist test/data/test'
              -c 'zero_block_surface_contact_point --block 1'
              -c 'add_flattened_extension_array --block 1 --max_degree 1
                      --input_deflection_column "surface deflection (m)"'
              -c 'add_block_force_array --block 1
                      --input_deflection_column "flattened deflection (m)"'
              -c 'add_block_cantilever_adjusted_extension_array --block 1'
              -c 'flat_filter_peaks --min_points 1'
              -c 'flat_peaks_to_polymer_peaks --block 1'
              -c 'polymer_fit_peaks --block 1'
              --command-no-exit

Still to come:
* Better contact point fitting or flattening, since the above method
  currently does a pretty bad job with the actual WLCs.  Perhaps a
  WLC-based zeroing could lead a second fitting iteration.
* A way to apply grouped commands like this to each curve in a playlist.
* Saving dicts in the playlist format or changing formats so the WLC
  fitting parameters are accessible for further analysis (e.g. with
  sawsim: http://dx.doi.org/10.1016/j.ijbiomac.2009.12.001 ).

9 years agoAdjust GUI initialization to handle already loaded playlists (via --command-no-exit...
W. Trevor King [Tue, 10 Aug 2010 20:16:37 +0000 (16:16 -0400)]
Adjust GUI initialization to handle already loaded playlists (via --command-no-exit, etc.)

9 years agoFix tree method exposure in playlist GUI pansl
W. Trevor King [Tue, 10 Aug 2010 20:15:50 +0000 (16:15 -0400)]
Fix tree method exposure in playlist GUI pansl

9 years agoAdd --command-no-exit to bin/hooke, making hardcoded testing calls to execute_command...
W. Trevor King [Tue, 10 Aug 2010 19:49:48 +0000 (15:49 -0400)]
Add --command-no-exit to bin/hooke, making hardcoded testing calls to execute_command() in gui superfluous.

9 years agoLog execution debug messages from the commandline UI (matching the GUI).
W. Trevor King [Tue, 10 Aug 2010 19:42:35 +0000 (15:42 -0400)]
Log execution debug messages from the commandline UI (matching the GUI).

9 years agoSet hand1 logging handler level to WARN by default (avoids DEBUG clutter, etc.)
W. Trevor King [Tue, 10 Aug 2010 19:41:53 +0000 (15:41 -0400)]
Set hand1 logging handler level to WARN by default (avoids DEBUG clutter, etc.)

9 years agoLog warning for invalid section/option settings
W. Trevor King [Tue, 10 Aug 2010 19:23:10 +0000 (15:23 -0400)]
Log warning for invalid section/option settings

9 years agoUse numpy.nan to hide unfit portions of polymer tension columns.
W. Trevor King [Tue, 10 Aug 2010 17:10:40 +0000 (13:10 -0400)]
Use numpy.nan to hide unfit portions of polymer tension columns.

9 years agoMake ModelFitter._data_scale_factor determination more robust with wierd data.
W. Trevor King [Tue, 10 Aug 2010 17:09:44 +0000 (13:09 -0400)]
Make ModelFitter._data_scale_factor determination more robust with wierd data.

9 years agoAdd 'polymer fit' error reporting to PolymerFitPeaksCommand
W. Trevor King [Tue, 10 Aug 2010 15:57:04 +0000 (11:57 -0400)]
Add 'polymer fit' error reporting to PolymerFitPeaksCommand

9 years agoAdded PolymerFitPeaksCommand to hooke.plugin.polymer_fit
W. Trevor King [Tue, 10 Aug 2010 15:49:13 +0000 (11:49 -0400)]
Added PolymerFitPeaksCommand to hooke.plugin.polymer_fit

9 years agoCollapse None entries for Argument.count == -1 in the GUI
W. Trevor King [Tue, 10 Aug 2010 15:09:00 +0000 (11:09 -0400)]
Collapse None entries for Argument.count == -1 in the GUI

9 years agoEnable hackish support for Argument.count == -1 (by setting it to 3)
W. Trevor King [Tue, 10 Aug 2010 14:59:24 +0000 (10:59 -0400)]
Enable hackish support for Argument.count == -1 (by setting it to 3)

9 years agoUpdate FlatPeaksCommand to use flexible column names.
W. Trevor King [Tue, 10 Aug 2010 12:52:43 +0000 (08:52 -0400)]
Update FlatPeaksCommand to use flexible column names.

9 years agoBetter None-handling in convert and propertyeditor
W. Trevor King [Tue, 10 Aug 2010 12:34:12 +0000 (08:34 -0400)]
Better None-handling in convert and propertyeditor

9 years agoAllow None values for plot clicks or SI values
W. Trevor King [Tue, 10 Aug 2010 12:33:32 +0000 (08:33 -0400)]
Allow None values for plot clicks or SI values

9 years agoAllow commandline to load without readline for non-Unix systems
W. Trevor King [Tue, 10 Aug 2010 10:44:50 +0000 (06:44 -0400)]
Allow commandline to load without readline for non-Unix systems

9 years agoUpdate PolymerFitCommand to use flexible column names.
W. Trevor King [Tue, 10 Aug 2010 00:10:33 +0000 (20:10 -0400)]
Update PolymerFitCommand to use flexible column names.

This allows you to fit multiple WLCs, etc. (by changing the 'output
tension column' name), so you can fit multiple peaks and/or multiple models.

9 years agoversion 1.0.0.alpha
W. Trevor King [Mon, 9 Aug 2010 16:00:25 +0000 (12:00 -0400)]
version 1.0.0.alpha

9 years agoUpdated version information to 1.0.0.alpha (Ninken).
W. Trevor King [Mon, 9 Aug 2010 15:59:46 +0000 (11:59 -0400)]
Updated version information to 1.0.0.alpha (Ninken).

This is mostly to bring the `type` field of __version__ into agreement
with Python's alpha/beta/candidate/final.  The bump to major version 1
is intended to reflect the major recoding of the Hooke internals that
I've been carrying out.

The name change (Kenzo -> Ninken) follows the list of Japanese
emperors
  http://en.wikipedia.org/wiki/List_of_Emperors_of_Japan
This matches Seinei -> Kenzo progression, so I'm pretty sure this is
where the current naming scheme comes from.

9 years agoAdd --version option to hooke.hooke.main
W. Trevor King [Mon, 9 Aug 2010 15:29:24 +0000 (11:29 -0400)]
Add --version option to hooke.hooke.main

10 years agoversion 0.9.0
W. Trevor King [Mon, 1 Feb 2010 16:10:00 +0000 (16:10 +0000)]
version 0.9.0

12 years agoversion 0.8.3
W. Trevor King [Thu, 24 Apr 2008 13:50:00 +0000 (13:50 +0000)]
version 0.8.3

9 years agoAdjust Mercurial repository URL to avoid NFS mounting issues on the server side
W. Trevor King [Mon, 9 Aug 2010 12:21:17 +0000 (08:21 -0400)]
Adjust Mercurial repository URL to avoid NFS mounting issues on the server side

9 years agoAllow hooke.ui to load with missing hooke.license submodule.
W. Trevor King [Mon, 9 Aug 2010 12:15:19 +0000 (08:15 -0400)]
Allow hooke.ui to load with missing hooke.license submodule.

This is like similar code in hooke/__init__.py, and allows you to run
Hooke from a snapshot without generating the license.py file.

hooke/license.py is generated as needed by update_copyright.py, so
it's not tracked by the version control system.  However, running
update_copyright.py requires a working Mercurial repository, which
users may not have if they installed from a VCS tarball, etc.  This
code allows those users to run Hooke from such snapshots.

Official releases should bundle a generates license.py file, so in
that case this code is superfluous.

9 years agoConvert the old flatten plotmanip into vclamp's FlattenCommand
W. Trevor King [Mon, 9 Aug 2010 01:59:16 +0000 (21:59 -0400)]
Convert the old flatten plotmanip into vclamp's FlattenCommand

9 years agoRemove the old multiplier plotmanip from the vclamp plugin.
W. Trevor King [Sun, 8 Aug 2010 20:48:59 +0000 (16:48 -0400)]
Remove the old multiplier plotmanip from the vclamp plugin.

Anything you did with the multiplier plugin can be done with
ForceCommand.  Perhaps ForceCommand should be a specific set of
defaults to a MultiplierCommand in the curve plugin, but until I see
good motivation for such genralization, I'll leave things the way they
are.

9 years agoMoved interesting old vclamp commands over into the curve plugin
W. Trevor King [Sun, 8 Aug 2010 20:46:32 +0000 (16:46 -0400)]
Moved interesting old vclamp commands over into the curve plugin

9 years agoRemove old vclamp commands replaced by the curve plugin's DeltaCommand.
W. Trevor King [Sun, 8 Aug 2010 20:41:47 +0000 (16:41 -0400)]
Remove old vclamp commands replaced by the curve plugin's DeltaCommand.

9 years agoUpdate CantileverAdjustedExtensionCommand to use flexible column names.
W. Trevor King [Sun, 8 Aug 2010 20:37:53 +0000 (16:37 -0400)]
Update CantileverAdjustedExtensionCommand to use flexible column names.

9 years agoUpdate ForceCommand to use flexible column names.
W. Trevor King [Sun, 8 Aug 2010 20:17:28 +0000 (16:17 -0400)]
Update ForceCommand to use flexible column names.

9 years agoUse .run vs. old ._run in vclamp.scale() to normalize params
W. Trevor King [Sun, 8 Aug 2010 20:09:40 +0000 (16:09 -0400)]
Use .run vs. old ._run in vclamp.scale() to normalize params

9 years agoUpdate Git -> Mercurial repo link in doc/install.txt.
W. Trevor King [Sun, 8 Aug 2010 20:06:21 +0000 (16:06 -0400)]
Update Git -> Mercurial repo link in doc/install.txt.

9 years agoClose parenthesis on column append in DifferenceCommand
W. Trevor King [Sun, 8 Aug 2010 13:18:36 +0000 (09:18 -0400)]
Close parenthesis on column append in DifferenceCommand

9 years agoUpdate DifferenceCommand to use flexible column names.
W. Trevor King [Sat, 7 Aug 2010 22:46:22 +0000 (18:46 -0400)]
Update DifferenceCommand to use flexible column names.

9 years agoUpdate DerivativeCommand to use flexible column names.
W. Trevor King [Sat, 7 Aug 2010 22:28:36 +0000 (18:28 -0400)]
Update DerivativeCommand to use flexible column names.

9 years agoCreate extra block holding PowerSpectrumCommand output data
W. Trevor King [Sat, 7 Aug 2010 22:11:37 +0000 (18:11 -0400)]
Create extra block holding PowerSpectrumCommand output data

9 years agoUpdate SurfaceContactCommand to use flexible column/info names.
W. Trevor King [Sat, 7 Aug 2010 21:37:41 +0000 (17:37 -0400)]
Update SurfaceContactCommand to use flexible column/info names.

9 years agoAdded 'Analsis' section to doc/hacking.txt
W. Trevor King [Sat, 7 Aug 2010 20:57:09 +0000 (16:57 -0400)]
Added 'Analsis' section to doc/hacking.txt

9 years agoRemove Assistant panel from GUI (get help via mouseover tooltips instead).
W. Trevor King [Sat, 7 Aug 2010 19:51:14 +0000 (15:51 -0400)]
Remove Assistant panel from GUI (get help via mouseover tooltips instead).

9 years agoUpdated doc/gui.txt and add and use Sphinx' todo extension.
W. Trevor King [Sat, 7 Aug 2010 19:44:26 +0000 (15:44 -0400)]
Updated doc/gui.txt and add and use Sphinx' todo extension.

9 years agoAdded 'delta' command to hooke.plugin.curve
W. Trevor King [Sat, 7 Aug 2010 18:54:01 +0000 (14:54 -0400)]
Added 'delta' command to hooke.plugin.curve

9 years agoUpdated 'Configuring Hooke' section of tutorial.txt
W. Trevor King [Sat, 7 Aug 2010 18:30:42 +0000 (14:30 -0400)]
Updated 'Configuring Hooke' section of tutorial.txt

9 years agoSet ._digest after saving in hooke.playlist.FilePlaylist.save()
W. Trevor King [Sat, 7 Aug 2010 18:22:38 +0000 (14:22 -0400)]
Set ._digest after saving in hooke.playlist.FilePlaylist.save()

The old implementation would complain of unsaved playlists upon
exiting if it was different from the originally loaded version, even
if you'd just saved the playlist!  We also switch to the more robust
`with` syntax:
  http://www.python.org/dev/peps/pep-0343/

9 years agoUpdate note section of tutorial.txt.
W. Trevor King [Sat, 7 Aug 2010 18:17:33 +0000 (14:17 -0400)]
Update note section of tutorial.txt.

Also replace empty strings with None during
hooke.util.convert._string_to_string() conversion to allow clearing
notes etc.

Also cleaned up docstrings in hooke.plugin.note to better reflect the
change made in commit 5e44aef4859c.

9 years agoFix POSIX URL and markup in tutorial.txt
W. Trevor King [Sat, 7 Aug 2010 18:05:09 +0000 (14:05 -0400)]
Fix POSIX URL and markup in tutorial.txt

9 years agoFix POSIX footnote in tutorial.txt
W. Trevor King [Sat, 7 Aug 2010 18:03:17 +0000 (14:03 -0400)]
Fix POSIX footnote in tutorial.txt

9 years agoAdd :: before new playlist creation code samples.
W. Trevor King [Sat, 7 Aug 2010 17:58:37 +0000 (13:58 -0400)]
Add :: before new playlist creation code samples.

9 years agoAdd 'new playlist' command and clean up 'Creating a playlist' in tutorial.txt.
W. Trevor King [Sat, 7 Aug 2010 17:55:05 +0000 (13:55 -0400)]
Add 'new playlist' command and clean up 'Creating a playlist' in tutorial.txt.

9 years agoFixed empytline -> emptyline typo in hooke.ui.commandline.
W. Trevor King [Sat, 7 Aug 2010 16:50:17 +0000 (12:50 -0400)]
Fixed empytline -> emptyline typo in hooke.ui.commandline.

Also use cmd and args vs. old argv[0], argv[1:] in parseline for clarity.

9 years agoFix another wget -o -> -O typo in doc/install.txt
W. Trevor King [Sat, 7 Aug 2010 16:34:05 +0000 (12:34 -0400)]
Fix another wget -o -> -O typo in doc/install.txt

9 years agoRemoved cruft from procplots & vclamp plugins whose functionality has been replaced.
W. Trevor King [Sat, 7 Aug 2010 16:27:44 +0000 (12:27 -0400)]
Removed cruft from procplots & vclamp plugins whose functionality has been replaced.

9 years agoRemove differentiation reference from difference's column argument help.
W. Trevor King [Sat, 7 Aug 2010 16:26:40 +0000 (12:26 -0400)]
Remove differentiation reference from difference's column argument help.

9 years agoRemove differentiation reference from power spectrum's column argument help.
W. Trevor King [Sat, 7 Aug 2010 16:18:50 +0000 (12:18 -0400)]
Remove differentiation reference from power spectrum's column argument help.

9 years agoDon't number properties in if count == 1 in gui.panel.propertyeditor.
W. Trevor King [Sat, 7 Aug 2010 16:12:24 +0000 (12:12 -0400)]
Don't number properties in if count == 1 in gui.panel.propertyeditor.

The zeros in the name are distracting and unnecessary.

9 years agoRemove macro plugin.
W. Trevor King [Sat, 7 Aug 2010 15:45:12 +0000 (11:45 -0400)]
Remove macro plugin.

The Hooke commandline seems like a pretty crippled place to go about
defining functions.  There should be enough examples of
plugins/commands with good documentation for users to be able to write
their own plugins/commands if they want additional functionality.
Macros just confuse the recommended path.

9 years agoFix nm -> m conversion bug in WTKDriver's deflection scaling.
W. Trevor King [Sat, 7 Aug 2010 15:31:18 +0000 (11:31 -0400)]
Fix nm -> m conversion bug in WTKDriver's deflection scaling.

9 years agoUse Playlist.__str__ code for __repr__ and __unicode__ too.
W. Trevor King [Sat, 7 Aug 2010 15:22:27 +0000 (11:22 -0400)]
Use Playlist.__str__ code for __repr__ and __unicode__ too.

9 years agoAdded point-click status notification to gui.panel.plot.
W. Trevor King [Sat, 7 Aug 2010 14:21:34 +0000 (10:21 -0400)]
Added point-click status notification to gui.panel.plot.

Now clicking on points displays their x/y value as well as the index
of the nearest x point for the various displayed data blocks.

This allowed me to adjust the bounds of the testing WLC fit in
hooke.ui.gui to more appropriate values, but these commands will
eventually be removed once I get through the rough development phase.

9 years agoFixes to polymer_fit plugin.
W. Trevor King [Sat, 7 Aug 2010 14:18:48 +0000 (10:18 -0400)]
Fixes to polymer_fit plugin.

Changes:
* Docstring updates to FJC_PEG_fn now that we're back to Newton's method.
* Use start/stop to select relevant slices of z/d_data for fitting.
* Use rescaled ModelFitter fitting.

9 years agoAdd ability to select multiple y columns to gui.panel.plot
W. Trevor King [Sat, 7 Aug 2010 12:59:05 +0000 (08:59 -0400)]
Add ability to select multiple y columns to gui.panel.plot

9 years agoDon't die comparing 'Low Voltage Z' with 'ZLowVoltage' in picoforce driver
W. Trevor King [Sat, 7 Aug 2010 01:19:47 +0000 (21:19 -0400)]
Don't die comparing 'Low Voltage Z' with 'ZLowVoltage' in picoforce driver

9 years agoUse 'Ciao scan list'/'@Sens. ZSensorSens' to scale picoforce z piezo data.
W. Trevor King [Fri, 6 Aug 2010 13:57:14 +0000 (09:57 -0400)]
Use 'Ciao scan list'/'@Sens. ZSensorSens' to scale picoforce z piezo data.

vs. my old 'Scanner list'/'@Sens. Zsens'.  The new implementation
is equivalent to the pre-Trevor Volt -> meter conversion.

The values for test/data/picoforce.000 changed from
  5.465e-08 m/V  ('Ciao scan list'/'@Sens. ZSensorSens')
to
  1e-06 m/V      ('Scanner list'/'@Sens. Zsens')
1e-6 m/V is a suspiciously even number for a piezo sensitivity rating,
but the scaled graph of deflection as a function of cantilever
adjusted extension certainly appears more appropriately cantilever
corrected.

9 years agoUse cantilever adjusted extension in polymer fitting.
W. Trevor King [Fri, 6 Aug 2010 12:43:16 +0000 (08:43 -0400)]
Use cantilever adjusted extension in polymer fitting.

9 years agoAdded CantileverAdjustedExtensionCommand to hooke.plugin.vclamp.
W. Trevor King [Fri, 6 Aug 2010 12:41:38 +0000 (08:41 -0400)]
Added CantileverAdjustedExtensionCommand to hooke.plugin.vclamp.

9 years agoMoved hooke.plugin.fit -> polymer_fit & updated to Plugin/Command architecture.
W. Trevor King [Fri, 6 Aug 2010 11:47:50 +0000 (07:47 -0400)]
Moved hooke.plugin.fit -> polymer_fit & updated to Plugin/Command architecture.

9 years agoAdd support to GUI's property editor for argument.count > 1.
W. Trevor King [Wed, 4 Aug 2010 17:36:40 +0000 (13:36 -0400)]
Add support to GUI's property editor for argument.count > 1.

Now we only bail if the argument count is -1 (infinite).

Also fix a col,row -> row,col bug that was goofing up property
tooltips.

9 years agoFix info.columns -> info['columns'] in vclamp.scale()
W. Trevor King [Wed, 4 Aug 2010 16:21:35 +0000 (12:21 -0400)]
Fix info.columns -> info['columns'] in vclamp.scale()

9 years agoFix single-parameter rescaling in hooke.util.fit.ModelFitter
W. Trevor King [Wed, 4 Aug 2010 15:53:33 +0000 (11:53 -0400)]
Fix single-parameter rescaling in hooke.util.fit.ModelFitter

9 years agoAdded rescaling option to hooke.util.fit.ModelFitter
W. Trevor King [Wed, 4 Aug 2010 14:45:28 +0000 (10:45 -0400)]
Added rescaling option to hooke.util.fit.ModelFitter

9 years agoRemove 'data = ...' line from the end of vclamp.SurfaceContactCommand._run
W. Trevor King [Wed, 4 Aug 2010 12:12:53 +0000 (08:12 -0400)]
Remove 'data = ...' line from the end of vclamp.SurfaceContactCommand._run

9 years agoExpose 'conditons' config settings to plugins directly.
W. Trevor King [Wed, 4 Aug 2010 12:11:17 +0000 (08:11 -0400)]
Expose 'conditons' config settings to plugins directly.

9 years agoAdd better help string to 'conditions' config section
W. Trevor King [Wed, 4 Aug 2010 12:10:04 +0000 (08:10 -0400)]
Add better help string to 'conditions' config section

9 years agoAdd `block` argument to hooke.plugin.vclamp.scale and only run required commands
W. Trevor King [Wed, 4 Aug 2010 10:43:54 +0000 (06:43 -0400)]
Add `block` argument to hooke.plugin.vclamp.scale and only run required commands

9 years agoMore cleanups to Setting/Argument type handling, mostly for count != 1.
W. Trevor King [Wed, 4 Aug 2010 00:01:55 +0000 (20:01 -0400)]
More cleanups to Setting/Argument type handling, mostly for count != 1.

9 years agoBroke type conversion out into hooke.util.convert and expanded its use.
W. Trevor King [Tue, 3 Aug 2010 20:26:37 +0000 (16:26 -0400)]
Broke type conversion out into hooke.util.convert and expanded its use.

9 years agoAdded Licensing section to README
W. Trevor King [Tue, 3 Aug 2010 19:38:21 +0000 (15:38 -0400)]
Added Licensing section to README

9 years agoAdded string, bool, int, and float conversion to HookeConfigParser
W. Trevor King [Tue, 3 Aug 2010 19:36:14 +0000 (15:36 -0400)]
Added string, bool, int, and float conversion to HookeConfigParser

9 years agoVelocityClampPlugin is a Plugin (not a Builtin)
W. Trevor King [Tue, 3 Aug 2010 18:06:17 +0000 (14:06 -0400)]
VelocityClampPlugin is a Plugin (not a Builtin)

9 years agoFix swapped docstrings for CurvePlugin's DifferenceCommand and DerivativeCommand
W. Trevor King [Tue, 3 Aug 2010 17:03:47 +0000 (13:03 -0400)]
Fix swapped docstrings for CurvePlugin's DifferenceCommand and DerivativeCommand

9 years agoUse .index() instead of ._index for NoteIndexList access
W. Trevor King [Tue, 3 Aug 2010 16:57:34 +0000 (12:57 -0400)]
Use .index() instead of ._index for NoteIndexList access

9 years agoBring hooke.plugin.tutorial up to date with Plugin/Command architecture.
W. Trevor King [Tue, 3 Aug 2010 15:18:54 +0000 (11:18 -0400)]
Bring hooke.plugin.tutorial up to date with Plugin/Command architecture.