Backward compatibility notes
----------------------------
-In the next major release, we will change the behaviour of the "git
-push" command. When "git push [$there]" does not say what to push, we
-have used the traditional "matching" semantics (all your branches were
-sent to the remote as long as there already are branches of the same
-name over there). We will use the "simple" semantics, that pushes the
-current branch to the branch with the same name only when the current
+In the next major release (not *this* one), we will change the
+behavior of the "git push" command.
+
+When "git push [$there]" does not say what to push, we have used the
+traditional "matching" semantics so far (all your branches were sent
+to the remote as long as there already are branches of the same name
+over there). We will use the "simple" semantics that pushes the
+current branch to the branch with the same name, only when the current
branch is set to integrate with that remote branch. There is a user
preference configuration variable "push.default" to change this, and
"git push" will warn about the upcoming change until you set this
-variable.
+variable in this release.
"git branch --set-upstream" is deprecated and may be removed in a
relatively distant future. "git branch [-u|--set-upstream-to]" has
* A credential helper to allow access to the Gnome keyring has been
added.
- * When "git am" sanitizes the Subject: line, we strip the prefix from
+ * When "git am" sanitizes the "Subject:" line, we strip the prefix from
"Re: subject" and also from a less common "re: subject", but left
- even less common "RE: subject" intact.
+ the even less common "RE: subject" intact. Now we strip that too.
* It was tempting to say "git branch --set-upstream origin/master",
but that tells Git to arrange the local branch "origin/master" to
repository path, etc.
* "git difftool --dir-diff" learned to use symbolic links to prepare
- temporary copy of the working tree when available.
+ a temporary copy of the working tree when available.
* "git grep" learned to use a non-standard pattern type by default if
a configuration variable tells it to.
- * "git merge-base" learned "--is-ancestor A B" option to tell if A is
+ * Accumulated updates to "git gui" has been merged.
+
+ * "git log -g" learned the "--grep-reflog=<pattern>" option to limit
+ its output to commits with a reflog message that matches the given
+ pattern.
+
+ * "git merge-base" learned the "--is-ancestor A B" option to tell if A is
an ancestor of B. The result is indicated by its exit status code.
- * The "-Xours" backend option to "git merge -s recursive" now takes
- effect even on binary files.
+ * "git mergetool" now allows users to override the actual command used
+ with the mergetool.$name.cmd configuration variable even for built-in
+ mergetool backends.
+
+ * "git rebase -i" learned the "--edit-todo" option to open an editor
+ to edit the instruction sheet.
Foreign Interface
* "git svn" has been updated to work with SVN 1.7.
- * "git p4" learned "--conflicts" option to specify what to do when
+ * "git p4" learned the "--conflicts" option to specify what to do when
encountering a conflict during "p4 submit".
-Performance, Internal Implementation, etc. (please report possible regressions)
+Performance, Internal Implementation, etc.
* Git ships with a fall-back regexp implementation for platforms with
buggy regexp library, but it was easy for people to keep using their
- platform regexp. A new test has been added to check this.
+ platform regexp by mistake. A new test has been added to check this.
* The "check-docs" build target has been updated and greatly
simplified.
- * The test suite is run under MALLOC_CHECK_ when running with glibc
+ * The test suite is run under MALLOC_CHECK_ when running with a glibc
that supports the feature.
* The documentation in the TeXinfo format was using indented output
monospace.
* Compatibility wrapper around some mkdir(2) implementations that
- reject parameter with trailing slash has been introduced.
+ reject parameters with trailing slash has been introduced.
* Compatibility wrapper for systems that lack usable setitimer() has
been added.
when the user says "git checkout -b -t foo bar" (e.g. "-t" is not a
good name for a branch).
- * Many internal uses of "git merge-base" equivalent were only to see
+ * Many internal uses of a "git merge-base" equivalent were only to see
if one commit fast-forwards to the other, which did not need the
full set of merge bases to be computed. They have been updated to
use less expensive checks.
maintenance track are contained in this release (see release notes
to them for details).
+ * The attribute system may be asked for a path that itself or its
+ leading directories no longer exists in the working tree, and it is
+ fine if we cannot open .gitattribute file in such a case. Failure
+ to open per-directory .gitattributes with error status other than
+ ENOENT and ENOTDIR should be diagnosed, but it wasn't.
+
+ * When looking for $HOME/.gitconfig etc., it is OK if we cannot read
+ them because they do not exist, but we did not diagnose existing
+ files that we cannot read.
+
* When "git am" is fed an input that has multiple "Content-type: ..."
header, it did not grok charset= attribute correctly.
- (merge 176943b jc/maint-mailinfo-mime-attr later to maint).
+
+ * "git am" mishandled a patch attached as application/octet-stream
+ (e.g. not text/*); Content-Transfer-Encoding (e.g. base64) was not
+ honored correctly.
* "git blame MAKEFILE" run in a history that has "Makefile" but not
"MAKEFILE" should say "No such file MAKEFILE in HEAD", but got
confused on a case insensitive filesystem and failed to do so.
- (merge 9aeaab6 jc/maint-blame-no-such-path later to maint).
* Even during a conflicted merge, "git blame $path" always meant to
blame uncommitted changes to the "working tree" version; make it
more useful by showing cleanly merged parts as coming from the other
branch that is being merged.
- (merge 9aeaab6 jc/maint-blame-no-such-path later to maint).
+
+ * It was unclear in the documentation for "git blame" that it is
+ unnecessary for users to use the "--follow" option.
+
+ * Output from "git branch -v" contains "(no branch)" that could be
+ localized, but the code to align it along with the names of
+ branches was counting in bytes, not in display columns.
+
+ * "git cherry-pick A C B" used to replay changes in A and then B and
+ then C if these three commits had committer timestamps in that
+ order, which is not what the user who said "A C B" naturally
+ expects.
+
+ * A repository created with "git clone --single" had its fetch
+ refspecs set up just like a clone without "--single", leading the
+ subsequent "git fetch" to slurp all the other branches, defeating
+ the whole point of specifying "only this branch".
* Documentation talked about "first line of commit log" when it meant
the title of the commit. The description was clarified by defining
how the title is decided and rewording the casual mention of "first
line" to "title".
- (merge 52ffe99 jw/doc-commit-title later to maint).
- * The attribute system may be asked for a path that itself or its
- leading directories no longer exists in the working tree, and it is
- fine if we cannot open .gitattribute file in such a case. Failure
- to open per-directory .gitattributes with error status other than
- ENOENT and ENOTDIR should be diagnosed, but it wasn't.
-
- * "git log --all-match --grep=A --grep=B" ought to show commits that
- mention both A and B, but when these three options are used with
- --author or --committer, it showed commits that mention either A or
- B (or both) instead.
- (merge 39f2e01 jc/maint-log-grep-all-match later to maint).
+ * "git cvsimport" did not thoroughly cleanse tag names that it
+ inferred from the names of the tags it obtained from CVS, which
+ caused "git tag" to barf and stop the import in the middle.
* Earlier we made the diffstat summary line that shows the number of
lines added/deleted localizable, but it was found irritating having
to see them in various languages on a list whose discussion language
- is English.
- (merge 218adaa nd/maint-diffstat-summary later to maint).
+ is English, and this change has been reverted.
* "git fetch --all", when passed "--no-tags", did not honor the
"--no-tags" option while fetching from individual remotes (the same
- issue existed with "--tags", but combination "--all --tags" makes
+ issue existed with "--tags", but the combination "--all --tags" makes
much less sense than "--all --no-tags").
- (merge 8556646 dj/fetch-all-tags later to maint).
- * The subcommand in "git remote" to remove a defined remote was
- "rm" and the command did not take a fully-spelled "remove".
- (merge e17dba8 nd/maint-remote-remove later to maint).
+ * "git fetch" over http had an old workaround for an unlikely server
+ misconfiguration; it turns out that this hurts debuggability of the
+ configuration in general, and has been reverted.
- * After "gitk" showed the contents of a tag, neither "Reread
- references" nor "Reload" did not update what is shown as the
- contents of it, when the user overwrote the tag with "git tag -f".
+ * "git fetch" over http advertised that it supports "deflate", which
+ is much less common, and did not advertise the more common "gzip" on
+ its Accept-Encoding header.
- * "git cvsimport" did not thoroughly cleanse tag names that it
- inferred from the names of the tags it obtained from CVS, which
- caused "git tag" to barf and stop the import in the middle.
+ * "git fetch" over the dumb-http revision walker could segfault when
+ curl's multi interface was used.
- * "git show --format='%ci'" did not give timestamp correctly for
- commits created without human readable name on "committer" line.
- (merge e27ddb6 jc/maint-ident-missing-human-name later to maint).
+ * "git gc --auto" notified the user that auto-packing has triggered
+ even under the "--quiet" option.
- * "git cherry-pick A C B" used to replay changes in A and then B and
- then C if these three commits had committer timestamps in that
- order, which is not what the user who said "A C B" naturally
- expects.
- (merge a73e22e mz/cherry-pick-cmdline-order later to maint).
+ * After "gitk" showed the contents of a tag, neither "Reread
+ references" nor "Reload" updated what is shown as the
+ contents of it when the user overwrote the tag with "git tag -f".
- * "git show --quiet" ought to be a synonym for "git show -s", but
- wasn't.
- (merge f9c75d8 jk/maint-quiet-is-synonym-to-s-in-log later to maint).
+ * "git log --all-match --grep=A --grep=B" ought to show commits that
+ mention both A and B, but when these three options are used with
+ --author or --committer, it showed commits that mention either A or
+ B (or both) instead.
+
+ * The "-Xours" backend option to "git merge -s recursive" was ignored
+ for binary files.
* "git p4", when "--use-client-spec" and "--detect-branches" are used
together, misdetected branches.
- (merge 21ef5df pw/p4-use-client-spec-branch-detection later to maint).
- * Output from "git branch -v" contains "(no branch)" that could be
- localized, but the code to align it along with the names of
- branches were counting in bytes, not in display columns.
- (merge 1452bd6 nd/branch-v-alignment later to maint).
+ * "git receive-pack" (the counterpart to "git push") did not give
+ progress output while processing objects it received to the puser
+ when run over the smart-http protocol.
- * When looking for $HOME/.gitconfig etc., it is OK if we cannot read
- them because they do not exist, but we did not diagnose existing
- files that we cannot read.
+ * When you misspell the command name you give to the "exec" action in
+ the "git rebase -i" instruction sheet you were told that 'rebase' is not a
+ git subcommand from "git rebase --continue".
- * The interactive prompt "git send-email" gives was error prone. It
+ * The subcommand in "git remote" to remove a defined remote was
+ "rm" and the command did not take a fully-spelled "remove".
+
+ * The interactive prompt that "git send-email" gives was error prone. It
asked "What e-mail address do you want to use?" with the address it
guessed (correctly) the user would want to use in its prompt,
tempting the user to say "y". But the response was taken as "No,
please use 'y' as the e-mail address instead", which is most
certainly not what the user meant.
- (merge 6183749 sb/send-email-reconfirm-fix later to maint).
+
+ * "git show --format='%ci'" did not give the timestamp correctly for
+ commits created without human readable name on the "committer" line.
+
+ * "git show --quiet" ought to be a synonym for "git show -s", but
+ wasn't.
+
+ * "git submodule frotz" was not diagnosed as "frotz" being an unknown
+ subcommand to "git submodule"; the user instead got a complaint
+ that "git submodule status" was run with an unknown path "frotz".
+
+ * "git status" honored the ignore=dirty settings in .gitmodules but
+ "git commit" didn't.
+
+ * "gitweb" did not give the correct committer timezone in its feed
+ output due to a typo.
projects / git.git / blobdiff