gen_bootloader.sh

   1 # $Id$
   2
   3 set_bootloader() {
   4         case "${BOOTLOADER}" in
   5                 grub)
   6                         set_bootloader_grub
   7                         ;;
   8                 grub2)
   9                         set_bootloader_grub2
  10                         ;;
  11                 *)
  12                         print_warning "Bootloader ${BOOTLOADER} is not currently supported"
  13                         ;;
  14         esac
  15 }
  16
  17 set_bootloader_read_fstab() {
  18         local ROOTFS=$(awk 'BEGIN{RS="((#[^\n]*)?\n)"}( $2 == "/" ) { print $1; exit }' /etc/fstab)
  19         local BOOTFS=$(awk 'BEGIN{RS="((#[^\n]*)?\n)"}( $2 == "'${BOOTDIR}'") { print $1; exit }' /etc/fstab)
  20
  21         # If ${BOOTDIR} is not defined in /etc/fstab, it must be the same as /
  22         [ -z "${BOOTFS}" ] && BOOTFS=${ROOTFS}
  23
  24         echo "${ROOTFS} ${BOOTFS}"
  25 }
  26
  27 set_bootloader_grub_read_device_map() {
  28         # Read GRUB device map
  29         [ ! -d ${TEMP} ] && mkdir ${TEMP}
  30         echo "quit" | grub --batch --device-map=${TEMP}/grub.map &>/dev/null
  31         echo "${TEMP}/grub.map"
  32 }
  33
  34 set_bootloader_grub2() {
  35         local GRUB_CONF
  36         for candidate in \
  37                         "${BOOTDIR}/grub2/grub.cfg" \
  38                         "${BOOTDIR}/grub/grub.cfg" \
  39                         ; do
  40                 if [[ -e "${candidate}" ]]; then
  41                         GRUB_CONF=${candidate}
  42                         break
  43                 fi
  44         done
  45
  46         if [[ -z "${GRUB_CONF}" ]]; then
  47                 print_error 1 "Error! Grub2 configuration file does not exist, please ensure grub2 is correctly setup first."
  48                 return 0
  49         fi
  50
  51         print_info 1 "You can customize Grub2 parameters in /etc/default/grub."
  52         print_info 1 "Running grub2-mkconfig to create ${GRUB_CONF}..."
  53         grub2-mkconfig -o "${GRUB_CONF}"
  54         [ "${BUILD_RAMDISK}" -ne 0 ] && sed -i 's/ro single/ro debug/' "${GRUB_CONF}"
  55 }
  56
  57 set_bootloader_grub() {
  58         local GRUB_CONF="${BOOTDIR}/grub/grub.conf"
  59
  60         print_info 1 "Adding kernel to ${GRUB_CONF}..."
  61
  62         if [ ! -e ${GRUB_CONF} ]
  63         then
  64                 local GRUB_BOOTFS
  65                 if [ -n "${BOOTFS}" ]
  66                 then
  67                         GRUB_BOOTFS=$BOOTFS
  68                 else
  69                         GRUB_BOOTFS=$(set_bootloader_read_fstab | cut -d' ' -f2)
  70                 fi
  71
  72                 # Get the GRUB mapping for our device
  73                 local GRUB_BOOT_DISK1=$(echo ${GRUB_BOOTFS} | sed -e 's#\(/dev/.\+\)[[:digit:]]\+#\1#')
  74                 local GRUB_BOOT_DISK=$(awk '{if ($2 == "'${GRUB_BOOT_DISK1}'") {gsub(/(\(|\))/, "", $1); print $1;}}' ${TEMP}/grub.map)
  75                 local GRUB_BOOT_PARTITION=$(($(echo ${GRUB_BOOTFS} | sed -e 's#/dev/.\+\([[:digit:]]?*\)#\1#') - 1))
  76
  77                 if [ -n "${GRUB_BOOT_DISK}" -a -n "${GRUB_BOOT_PARTITION}" ]
  78                 then
  79
  80                         # Create grub configuration directory and file if it doesn't exist.
  81                         [ ! -d `dirname ${GRUB_CONF}` ] && mkdir -p `dirname ${GRUB_CONF}`
  82
  83                         touch ${GRUB_CONF}
  84                         echo 'default 0' >> ${GRUB_CONF}
  85                         echo 'timeout 5' >> ${GRUB_CONF}
  86                         echo "root (${GRUB_BOOT_DISK},${GRUB_BOOT_PARTITION})" >> ${GRUB_CONF}
  87                         echo >> ${GRUB_CONF}
  88
  89                         # Add grub configuration to grub.conf
  90                         echo "# Genkernel generated entry, see GRUB documentation for details" >> ${GRUB_CONF}
  91                         echo "title=Gentoo Linux ($KV)" >> ${GRUB_CONF}
  92                         echo -e "\tkernel /kernel-${KNAME}-${ARCH}-${KV} root=${GRUB_ROOTFS}" >> ${GRUB_CONF}
  93                         if [ "${BUILD_INITRD}" = '1' ]
  94                         then
  95                                 if [ "${PAT}" -gt '4' ]
  96                                 then
  97                                     echo -e "\tinitrd /initramfs-${KNAME}-${ARCH}-${KV}" >> ${GRUB_CONF}
  98                                 fi
  99                         fi
 100                         echo >> ${GRUB_CONF}
 101                 else
 102                         print_error 1 "Error! ${BOOTDIR}/grub/grub.conf does not exist and the correct settings can not be automatically detected."
 103                         print_error 1 "Please manually create your ${BOOTDIR}/grub/grub.conf file."
 104                 fi
 105
 106         else
 107                 # The grub.conf already exists, so let's try to duplicate the default entry
 108                 if set_bootloader_grub_check_for_existing_entry "${GRUB_CONF}"; then
 109                         print_warning 1 "An entry was already found for a kernel/initramfs with this name...skipping update"
 110                         return 0
 111                 fi
 112
 113                 set_bootloader_grub_duplicate_default "${GRUB_CONF}"
 114         fi
 115
 116 }
 117
 118 set_bootloader_grub_duplicate_default_replace_kernel_initrd() {
 119         sed -r -e "/^[[:space:]]*kernel/s/kernel-[[:alnum:][:punct:]]+/kernel-${KNAME}-${ARCH}-${KV}/" - |
 120         sed -r -e "/^[[:space:]]*initrd/s/init(rd|ramfs)-[[:alnum:][:punct:]]+/init\1-${KNAME}-${ARCH}-${KV}/"
 121 }
 122
 123 set_bootloader_grub_check_for_existing_entry() {
 124         local GRUB_CONF=$1
 125         if grep -q "^[[:space:]]*kernel[[:space:]=]*.*/kernel-${KNAME}-${ARCH}-${KV}\([[:space:]]\|$\)" "${GRUB_CONF}" &&
 126                 grep -q "^[[:space:]]*initrd[[:space:]=]*.*/initramfs-${KNAME}-${ARCH}-${KV}\([[:space:]]\|$\)" "${GRUB_CONF}"
 127         then
 128                 return 0
 129         fi
 130         return 1
 131 }
 132
 133 set_bootloader_grub_duplicate_default() {
 134         local GRUB_CONF=$1
 135         local GRUB_CONF_TMP="${GRUB_CONF}.tmp"
 136
 137         line_count=$(wc -l < "${GRUB_CONF}")
 138         line_nums="$(grep -n "^title" "${GRUB_CONF}" | cut -d: -f1)"
 139         if [ -z "${line_nums}" ]; then
 140                 print_error 1 "No current 'title' entries found in your grub.conf...skipping update"
 141                 return 0
 142         fi
 143         line_nums="${line_nums} $((${line_count}+1))"
 144
 145         # Find default entry
 146         default=$(sed -rn '/^[[:space:]]*default[[:space:]=]/s/^.*default[[:space:]=]+([[:alnum:]]+).*$/\1/p' "${GRUB_CONF}")
 147     if [ -z "${default}" ]; then
 148                 print_warning 1 "No default entry found...assuming 0"
 149                 default=0
 150         fi
 151         if ! echo ${default} | grep -q '^[0-9]\+$'; then
 152                 print_error 1 "We don't support non-numeric (such as 'saved') default values...skipping update"
 153                 return 0
 154         fi
 155
 156         # Grub defaults are 0 based, cut is 1 based
 157         # Figure out where the default entry lives
 158         startstop=$(echo ${line_nums} | cut -d" " -f$((${default}+1))-$((${default}+2)))
 159         startline=$(echo ${startstop} | cut -d" " -f1)
 160         stopline=$(echo ${startstop} | cut -d" " -f2)
 161
 162         # Write out the bits before the default entry
 163         sed -n 1,$((${startline}-1))p "${GRUB_CONF}" > "${GRUB_CONF_TMP}"
 164
 165         # Put in our title
 166         echo "title=Gentoo Linux (${KV})" >> "${GRUB_CONF_TMP}"
 167
 168         # Pass the default entry (minus the title) through to the replacement function and pipe the output to GRUB_CONF_TMP
 169         sed -n $((${startline}+1)),$((${stopline}-1))p "${GRUB_CONF}" | set_bootloader_grub_duplicate_default_replace_kernel_initrd >> "${GRUB_CONF_TMP}"
 170
 171         # Finish off with everything including the previous default entry
 172         sed -n ${startline},${line_count}p "${GRUB_CONF}" >> "${GRUB_CONF_TMP}"
 173
 174         cp "${GRUB_CONF}" "${GRUB_CONF}.bak"
 175         cp "${GRUB_CONF_TMP}" "${GRUB_CONF}"
 176         rm "${GRUB_CONF_TMP}"
 177 }