From d591cebf03e1db65471727e4f6b20de95d6d7b43 Mon Sep 17 00:00:00 2001 From: David Schleef Date: Sun, 26 Nov 2000 00:53:20 +0000 Subject: [PATCH] change format --- Documentation/comedi/drivers.txt | 119 +++++++++++++++---------------- 1 file changed, 56 insertions(+), 63 deletions(-) diff --git a/Documentation/comedi/drivers.txt b/Documentation/comedi/drivers.txt index 695d71de..160bee33 100644 --- a/Documentation/comedi/drivers.txt +++ b/Documentation/comedi/drivers.txt @@ -2,8 +2,8 @@ This file contains information about specific drivers, their features, and limitation. -8255.o: - +Driver: 8255.o +Description: generic 8255 support Author: ds Status: only mode 0 supported @@ -22,8 +22,8 @@ configure the 8255 subdevice automatically. -ni-atmio.o: National Instruments AT-MIO-E series (all boards) - +Driver: ni-atmio.o +Description: National Instruments AT-MIO-E series (all boards) Author: ds Status: mainly limited by Comedi infrastructure @@ -45,30 +45,29 @@ is terrible. Calibration at boot is strongly encouraged. -das08.o: ComputerBoards, Keithley Metrabyte DAS-08 - +Driver: das08.o +Description: ComputerBoards, Keithley Metrabyte DAS-08 Authors: Warren Jasper, ds Status: unknown -das08jr.o: ComputerBoards DAS-08jr-AO - +Driver: das08jr.o +Description: ComputerBoards DAS-08jr-AO Authors: Jochen Küpper , ds Status: unknown - -das16.o: CIO-DAS16 (& compatibles) - +Driver: das16.o +Description: CIO-DAS16 (& compatibles) Authors: Sam Moore, Warren Jasper, ds Status: unknown -das1600.o: Keithley Metrabyte DAS1600 (& compatibles) - +Driver: das1600.o +Description: Keithley Metrabyte DAS1600 (& compatibles) Author: Anders Blomdell The driver recognizes the following board names: @@ -112,8 +111,8 @@ Options (probably wrong, verify with source): -das6402.o: Keithley Metrabyte DAS6402 (& compatibles) - +Driver: das6402.o +Description: Keithley Metrabyte DAS6402 (& compatibles) Author: Oystein Svendsen Status: unknown @@ -122,9 +121,8 @@ Status: unknown -dt2801.o: Data Translation DT2801 series - (2801, 2805, 2808, 2809, 2818, and DT01-EZ) - +Driver: dt2801.o +Description: Data Translation DT2801 series (2801, 2805, 2808, 2809, 2818, and DT01-EZ) Author: ds Status: works @@ -132,15 +130,15 @@ Status: works -dt2811.o: Data Translation DT2811 - +Driver: dt2811.o +Description: Data Translation DT2811 Author: ds Status: might work -dt2814.o: Data Translation DT2814 - +Driver: dt2814.o +Description: Data Translation DT2814 Author: ds Status: complete @@ -156,8 +154,8 @@ is not supported. -dt2815.o: Data Translation DT2815 - +Driver: dt2815.o +Description: Data Translation DT2815 Author: ds Status: mostly complete, untested @@ -205,8 +203,8 @@ Options -dt2817.o: Data Translation DT2817 - +Driver: dt2817.o +Description: Data Translation DT2817 Author: ds Status: complete @@ -219,9 +217,8 @@ with 32 channels, configurable in groups of 8. -dt282x.o: Data Translation DT2821 series - (including DT-EZ) - +Driver: dt282x.o +Description: Data Translation DT2821 series (including DT-EZ) Author: ds Status: complete @@ -243,15 +240,15 @@ in the source, as well as the file etc/dt282x.conf. -dt3000.o: Data Translation DT3000 series - +Driver: dt3000.o +Description: Data Translation DT3000 series Author: ds Status: untested -ii_pci20kc.o: Intelligent Instruments PCI-20001C carrier board - +Driver: ii_pci20kc.o +Description: Intelligent Instruments PCI-20001C carrier board Author: Markus Kempf Status: works @@ -287,16 +284,16 @@ options for PCI-20341M: -multiq3.o: Quanser Consulting MultiQ-3 - +Driver: multiq3.o +Description: Quanser Consulting MultiQ-3 Author: Anders Blomdell Status: works -ni_pcidio.o: National Instruments PCI-DIO32HS, PCI-DIO96, PCI-6533, PCI-6503 - +Driver: ni_pcidio.o +Description: National Instruments PCI-DIO32HS, PCI-DIO96, PCI-6533, PCI-6503 Author: ds Status: works in immediate mode @@ -314,8 +311,8 @@ AT-MIO96. -comedi_parport.o: Standard PC parallel port - +Driver: comedi_parport.o +Description: Standard PC parallel port Author: ds Status: works in immediate mode @@ -364,8 +361,8 @@ Please report any sucesses/failures. -ni_pcimio.o: National Instruments PCI-MIO-E series (all boards) - +Driver: ni_pcimio.o +Description: National Instruments PCI-MIO-E series (all boards) Author: ds Status: mainly limited by Comedi infrastructure @@ -385,8 +382,8 @@ DMA is halfway completed, but not yet operational. -pcl711.o: Advantech PCL-711 and 711b, ADLink ACL-8112 - +Driver: pcl711.o +Description: Advantech PCL-711 and 711b, ADLink ACL-8112 Authors: ds, Janne Jalkanen , Eric Bunn Status: mostly complete @@ -402,9 +399,8 @@ supported. -pcl724.o: Advantech PCL-724, PCL-722, PCL-731 - ADLink ACL-7122, ACL-7124, PET-48DIO - +Driver: pcl724.o +Description: Advantech PCL-724, PCL-722, PCL-731 ADLink ACL-7122, ACL-7124, PET-48DIO Author: Michal Dobes Status: untested @@ -415,18 +411,16 @@ See the source for configuration details. -pcl725.o: PC-LabCard PCL-725 (& compatibles) - +Driver: pcl725.o +Description: PC-LabCard PCL-725 (& compatibles) Author: ds Status: unknown -pcl726.o: PC-LabCard PCL-726 (& compatibles) - Advantech PCL-726 - ADLink Technology ACL-6126 - +Driver: pcl726.o +Description: PC-LabCard PCL-726 (& compatibles), Advantech PCL-726, ADLink Technology ACL-6126 Author: ds Status: untested @@ -435,8 +429,8 @@ Interrupts are not supported. -pcl812.o: Advantech PCL-812PG, Advantech PCL-813B and ADLink ACL-8113 - +Driver: pcl812.o +Description: Advantech PCL-812PG, Advantech PCL-813B and ADLink ACL-8113 Author: Michal Dobes Status: works (I hope. My board fire up under my hands and I haven't time to finish tests.) @@ -471,9 +465,8 @@ Options: [2] - max number of samples in ai_mode0 (defaul=1scan) -pcl818.o: Advantech PCL-818 cards (818, 818L, 818H, 818HD, 818HG) - Advantech PCL-718 - +Driver: pcl818.o +Description: Advantech PCL-818 cards (818, 818L, 818H, 818HD, 818HG), Advantech PCL-718 Author: Michal Dobes Status: works @@ -503,8 +496,8 @@ A word or two about DMA. Driver support DMA operations at two ways: See the head of the source file pcl818.c for configuration options. -rti800.o: Analog Devices RTI-800/815 - +Driver: rti800.o +Description: Analog Devices RTI-800/815 Author: ds Status: unknown @@ -512,14 +505,14 @@ See the source for configuration details. -rti802.o: Analog Devices RTI-802 - +Driver: rti802.o +Description: Analog Devices RTI-802 Author: Anders Blomdell Status: works -adl_pci9118.o: Adlink PCI-9118DG, PCI-9118HG, PCI-9118HR - +Driver: adl_pci9118.o +Description: Adlink PCI-9118DG, PCI-9118HG, PCI-9118HR Author: Michal Dobes Status works -- 2.26.2