From d12309ce14179bfa9f33f5b5a38eab582c8fcc39 Mon Sep 17 00:00:00 2001
From: Donnie Berkholz <dberkholz@gentoo.org>
Date: Fri, 5 Nov 2004 00:54:37 +0000
Subject: [PATCH] Reorganize functions, so primary ebuild functions are at the
 top and sub-functions are below them. This gives us a big-picture view to
 start, followed by all the nitty gritty.

---
 x11-base/xorg-x11/ChangeLog                |    8 +-
 x11-base/xorg-x11/Manifest                 |    4 +-
 x11-base/xorg-x11/xorg-x11-6.8.0-r2.ebuild | 1185 ++++++++++----------
 3 files changed, 612 insertions(+), 585 deletions(-)

diff --git a/x11-base/xorg-x11/ChangeLog b/x11-base/xorg-x11/ChangeLog
index a0553535a546..6d9d3a3ab5bd 100644
--- a/x11-base/xorg-x11/ChangeLog
+++ b/x11-base/xorg-x11/ChangeLog
@@ -1,6 +1,12 @@
 # ChangeLog for x11-base/xorg-x11
 # Copyright 2000-2004 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-x11/ChangeLog,v 1.199 2004/11/04 04:39:01 spyderous Exp $
+# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-x11/ChangeLog,v 1.200 2004/11/05 00:54:37 spyderous Exp $
+
+  04 Nov 2004; Donnie Berkholz <spyderous@gentoo.org>;
+  xorg-x11-6.8.0-r2.ebuild:
+  Reorganize functions, so primary ebuild functions are at the top and
+  sub-functions are below them. This gives us a big-picture view to start,
+  followed by all the nitty gritty.
 
   03 Nov 2004; Donnie Berkholz <spyderous@gentoo.org>;
   xorg-x11-6.8.0-r2.ebuild:
diff --git a/x11-base/xorg-x11/Manifest b/x11-base/xorg-x11/Manifest
index 8ef1e6a5c8ff..778869d6884a 100644
--- a/x11-base/xorg-x11/Manifest
+++ b/x11-base/xorg-x11/Manifest
@@ -1,8 +1,8 @@
 MD5 ac1137a20503dcb8f9ba2939a2a766f6 metadata.xml 230
 MD5 9215e5f10589329a5056f366aa6820e8 xorg-x11-6.7.0-r2.ebuild 38086
 MD5 a2e1b9169dec8e5eb20d49694b6bbcf0 xorg-x11-6.8.0-r1.ebuild 41338
-MD5 74302127b92ec3ad0a0c6676a868aa3f ChangeLog 43411
-MD5 0c8442ca6ebff1ec8662cb79058a3aff xorg-x11-6.8.0-r2.ebuild 47633
+MD5 08ac4a4a205dca28476581fd53ab8f0d ChangeLog 43677
+MD5 e1999ad7acc88a50a5d819ed5e339b81 xorg-x11-6.8.0-r2.ebuild 47903
 MD5 a3314fbdc270d7d84ea14fd477b8d048 files/digest-xorg-x11-6.7.0-r2 904
 MD5 70facbdb85b7ef2bc9b9b702442eda7e files/digest-xorg-x11-6.8.0-r1 908
 MD5 b7a56cbcde55a013564f056f87e59867 files/digest-xorg-x11-6.8.0-r2 908
diff --git a/x11-base/xorg-x11/xorg-x11-6.8.0-r2.ebuild b/x11-base/xorg-x11/xorg-x11-6.8.0-r2.ebuild
index de44341d1477..9b749e713a8d 100644
--- a/x11-base/xorg-x11/xorg-x11-6.8.0-r2.ebuild
+++ b/x11-base/xorg-x11/xorg-x11-6.8.0-r2.ebuild
@@ -1,6 +1,6 @@
 # Copyright 1999-2004 Gentoo Foundation
 # Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-x11/xorg-x11-6.8.0-r2.ebuild,v 1.53 2004/11/04 04:39:01 spyderous Exp $
+# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-x11/xorg-x11-6.8.0-r2.ebuild,v 1.54 2004/11/05 00:54:37 spyderous Exp $
 
 # Set TDFX_RISKY to "yes" to get 16-bit, 1024x768 or higher on low-memory
 # voodoo3 cards.
@@ -140,6 +140,501 @@ DESCRIPTION="An X11 implementation maintained by the X.Org Foundation"
 
 HOSTCONF="config/cf/host.def"
 
+pkg_setup() {
+	#################################################
+	### GET RID OF THIS ONCE THIS EBUILD IS READY ###
+	#################################################
+	if [ -z "${BREAKME}" ]; then
+		die "Set the BREAKME variable to emerge this. It's in development. Stop using it."
+	fi
+
+	FILES_DIR="${WORKDIR}/files"
+	PATCHDIR="${WORKDIR}/patch"
+	EXCLUDED="${PATCHDIR}/excluded"
+
+	# Set up CFLAG-related things
+	cflag_setup
+
+	# See bug #35468, circular pam-X11 dep
+	if use pam && best_version x11-base/${PN}; then
+		einfo "Previous ${PN} installation detected"
+		einfo "Enabling PAM features in ${PN}..."
+	else
+		einfo "Previous ${PN} installation NOT detected"
+		einfo "Disabling PAM features in ${PN}..."
+		einfo "You must remerge ${PN} to enable pam."
+		einfo "See http://bugs.gentoo.org/show_bug.cgi?id=35468."
+	fi
+
+	if use static || use dlloader; then
+		# A static build disallows building the SDK.
+		# See config/xf86.rules.
+		# So does a DllModules YES (use dlloader) build (#50562)
+		# The latter is pending a potential patch.
+		if use sdk; then
+			die "The static and dlloader USE flags are currently incompatible with the sdk USE flag."
+		fi
+	fi
+
+	if use dmx && use doc; then
+		die "The dmx and doc USE flags are temporarily incompatible and result in a dead build."
+	fi
+
+	if use xv && ! use opengl; then
+		eerror "See http://bugs.gentoo.org/show_bug.cgi?id=67996"
+		eerror "The xv USE flag currently requires the opengl flag."
+		die "This is a known bug. Do not report it."
+	fi
+
+	# on amd64 we need /usr/lib64/X11/locale/lib to be a symlink
+	# created by the emul lib ebuild in order for adobe acrobat, staroffice,
+	# and a few other apps to work.
+	use amd64 && get_libdir_override lib64
+	# lib32 isnt a supported configuration (yet?)
+	[ "${CONF_LIBDIR}" == "lib32" ] && get_libdir_override lib
+
+
+	# Echo a message to the user about bitmap-fonts
+	if ! use bitmap-fonts; then
+		ewarn "Please emerge this with USE=\"bitmap-fonts\" to enable"
+		ewarn "75dpi and 100dpi fonts.  Your GTK+-1.2 fonts may look"
+		ewarn "screwy otherwise"
+
+		ebeep 5
+		epause 10
+	fi
+}
+
+src_unpack() {
+
+	# Unpack source and patches
+	ebegin "Unpacking source"
+#		unpack ${P}.tar.bz2
+		unpack X11R${PV}-src{1,2,3,4,5}.tar.gz
+	eend 0
+
+	if use doc; then
+		ebegin "Unpacking documentation"
+			unpack X11R${PV}-src{6,7}.tar.gz
+		eend 0
+	fi
+
+	ebegin "Unpacking Gentoo files and patches"
+		unpack ${P}-files-${FILES_VER}.tar.bz2 > /dev/null
+		unpack ${P}-patches-${PATCH_VER}.tar.bz2 > /dev/null
+	eend 0
+
+	# Unpack TaD's gentoo cursors
+	ebegin "Unpacking Gentoo cursors"
+		unpack gentoo-cursors-tad-${XCUR_VER}.tar.bz2 > /dev/null
+	eend 0
+
+	# Unpack extra fonts stuff from Mandrake
+	ebegin "Unpacking fonts"
+		if use nls; then
+			unpack gemini-koi8-u.tar.bz2 > /dev/null
+		fi
+		unpack eurofonts-X11.tar.bz2 > /dev/null
+		if use font-server; then
+			unpack xfsft-encodings-${XFSFT_ENC_VER}.tar.bz2 > /dev/null
+		fi
+	eend 0
+
+	# Remove bum encoding
+	rm -f ${WORKDIR}/usr/share/fonts/encodings/urdunaqsh-0.enc
+
+	patch_setup
+
+	# Bulk patching - based on patch name
+	# Will create excluded stuff once it's needed
+	cd ${WORKDIR}
+	EPATCH_SUFFIX="patch" \
+	epatch ${PATCHDIR}
+	cd ${S}
+
+	host_def_setup
+
+	cd ${S}
+	if use doc; then
+		# These are not included anymore as they are obsolete
+		local x
+		for x in ${S}/programs/Xserver/hw/xfree86/{XF98Conf.cpp,XF98Config}; do
+			if [ -f ${x} ]; then
+				sed -i '/Load[[:space:]]*"\(pex5\|xie\)"/d' ${x}
+			fi
+		done
+	fi
+
+}
+
+src_compile() {
+
+	# Set MAKEOPTS to have proper -j? option ..
+	get_number_of_jobs
+
+	# If a user defines the MAKE_OPTS variable in /etc/make.conf instead of
+	# MAKEOPTS, they'll redefine an internal xorg Makefile variable and the
+	# xorg build will silently die. This is tricky to track down, so I'm
+	# adding a preemptive fix for this issue by making sure that MAKE_OPTS is
+	# unset. (drobbins, 08 Mar 2003)
+	unset MAKE_OPTS
+
+	einfo "Building xorg-x11..."
+	if use debug; then
+		chmod u+x ${S}/config/util/makeg.sh
+		FAST=1 ${S}/config/util/makeg.sh World WORLDOPTS="" \
+			|| die "debug make World failed"
+	else
+		FAST=1 emake World WORLDOPTS="" || die "make World failed"
+	fi
+
+	if use nls; then
+		emake -C ${S}/nls || die "nls build failed"
+	fi
+
+}
+
+src_install() {
+
+	unset MAKE_OPTS
+
+	einfo "Installing X.org X11..."
+	# gcc3 related fix.  Do this during install, so that our
+	# whole build will not be compiled without mmx instructions.
+	if [ "$(gcc-version)" != "2.95" ] && use x86; then
+		make install DESTDIR=${D} \
+		|| make CDEBUGFLAGS="${CDEBUGFLAGS} -mno-mmx" \
+			CXXDEBUGFLAGS="${CXXDEBUGFLAGS} -mno-mmx" \
+			install DESTDIR=${D} || die "install failed"
+	else
+		make install DESTDIR=${D} || die "install failed"
+	fi
+
+	if use sdk; then
+		einfo "Installing X.org X11 SDK..."
+		make install.sdk DESTDIR=${D} || die "sdk install failed"
+	fi
+
+	einfo "Installing man pages..."
+	make install.man DESTDIR=${D} || die "man page install failed"
+	einfo "Compressing man pages..."
+	prepman /usr
+
+	if use nls; then
+		cd ${S}/nls
+		make DESTDIR=${D} install || die "nls install failed"
+	fi
+
+	backward_compat_setup
+
+	# Fix permissions on locale/common/*.so
+	local x
+	for x in ${D}/usr/$(get_libdir)/locale/$(get_libdir)/common/*.so*; do
+		if [ -f ${x} ]; then
+			fperms 0755 ${x/${D}}
+		fi
+	done
+
+	# Fix permissions on modules ...
+	for x in $(find ${D}/usr/$(get_libdir)/modules -name '*.o' -o -name '*.so'); do
+		if [ -f ${x} ]; then
+			fperms 0755 ${x/${D}}
+		fi
+	done
+
+	# We zap our CFLAGS in the host.def file, as hardcoded CFLAGS can
+	# mess up other things that use xmkmf
+	ebegin "Fixing $(get_libdir)/config/host.def"
+		cp ${D}/usr/$(get_libdir)/config/host.def ${T}
+		awk '!/OptimizedCDebugFlags|OptimizedCplusplusDebugFlags|GccWarningOptions/ {print $0}' \
+			${T}/host.def > ${D}/usr/$(get_libdir)/config/host.def \
+			|| eerror "Munging host.def failed"
+		# theoretically, /usr/lib/X11/config is a possible candidate for
+		# config file management. If we find that people really worry about imake
+		# stuff, we may add it.  But for now, we leave the dir unprotected.
+	eend 0
+
+	# EURO support
+	ebegin "Euro Support..."
+		LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${D}/usr/$(get_libdir)" \
+		${D}/usr/X11R6/bin/bdftopcf -t ${WORKDIR}/Xlat9-8x14.bdf | \
+			gzip -9 > ${D}/usr/share/fonts/misc/Xlat9-8x14-lat9.pcf.gz
+		LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${D}/usr/$(get_libdir)" \
+		${D}/usr/X11R6/bin/bdftopcf -t ${WORKDIR}/Xlat9-9x16.bdf | \
+			gzip -9 > ${D}/usr/share/fonts/misc/Xlat9-9x16-lat9.pcf.gz
+		LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${D}/usr/$(get_libdir)" \
+		${D}/usr/X11R6/bin/bdftopcf -t ${WORKDIR}/Xlat9-10x20.bdf | \
+			gzip -9 > ${D}/usr/share/fonts/misc/Xlat9-10x20-lat9.pcf.gz
+	eend 0
+
+	# Standard symlinks
+	dodir /usr/{bin,include,$(get_libdir)}
+	dosym ../X11R6/bin /usr/bin/X11
+	dosym ../X11R6/include/X11 /usr/include/X11
+	dosym ../X11R6/include/DPS /usr/include/DPS
+	dosym ../X11R6/include/GL /usr/include/GL
+	dosym ../../usr/$(get_libdir)/xkb /etc/X11/xkb
+	# Added one to reflect xkb move from /usr/X11R6/lib/X11/xkb to /usr/lib/xkb
+	dosym ../../lib/xkb /usr/X11R6/lib/X11/xkb
+
+	if use opengl; then
+		fix_opengl_symlinks
+	fi
+
+	# Some critical directories
+	keepdir /var/lib/xdm
+	dosym ../../../var/lib/xdm /etc/X11/xdm/authdir
+
+	# .la files for libtool support
+	insinto /usr/$(get_libdir)
+	doins ${FILES_DIR}/$(get_libdir)/*.la
+
+	# Backwards compat, FHS, etc.
+	dosym ../../usr/X11R6/bin/Xorg /etc/X11/X
+
+	# Fix perms
+	fperms 755 /usr/$(get_libdir)/xkb/geometry/sgi /usr/X11R6/bin/dga
+
+	compose_files_setup
+
+	# Yet more Mandrake
+	if use font-server; then
+		ebegin "Encoding files for xfsft font server..."
+			dodir /usr/share/fonts/encodings
+			cp -a ${WORKDIR}/usr/share/fonts/encodings/* \
+				${D}/usr/share/fonts/encodings
+
+			for x in ${D}/usr/share/fonts/encodings/{.,large}/*.enc; do
+				[ -f "${x}" ] && gzip -9 -f ${x} \
+					|| eerror "gzipping ${x} failed"
+			done
+		eend 0
+	fi
+
+	if use nls; then
+		ebegin "gemini-koi8 fonts..."
+			cd ${WORKDIR}/ukr
+			gunzip *.Z || eerror "gunzipping gemini-koi8 fonts failed"
+			gzip -9 *.pcf || eerror "gzipping gemini-koi8 fonts failed"
+			cd ${S}
+			cp -a ${WORKDIR}/ukr ${D}/usr/share/fonts \
+				|| eerror "copying gemini-koi8 fonts failed"
+		eend 0
+	fi
+
+	etc_files_install
+
+	# We move libGLU to /usr/lib now
+	dosym libGLU.so.1.3 /usr/$(get_libdir)/libMesaGLU.so
+
+	if use opengl; then
+		setup_dynamic_libgl
+	fi
+
+	# Make the core cursor the default.  People seem not to like whiteglass
+	# for some reason.
+	dosed 's:whiteglass:core:' /usr/share/cursors/${PN}/default/index.theme
+
+	strip_execs
+
+	# Install TaD's gentoo cursors
+	insinto /usr/share/cursors/${PN}/gentoo/cursors
+	doins ${WORKDIR}/cursors/gentoo/cursors/*
+	insinto /usr/share/cursors/${PN}/gentoo-blue/cursors
+	doins ${WORKDIR}/cursors/gentoo-blue/cursors/*
+	insinto /usr/share/cursors/${PN}/gentoo-silver/cursors
+	doins ${WORKDIR}/cursors/gentoo-silver/cursors/*
+
+	# Remove xterm app-defaults, since we don't install xterm
+#	rm ${D}/etc/X11/app-defaults/{UXTerm,XTerm,XTerm-color}
+
+	# For Battoussai's gatos stuffs:
+	if use sdk; then
+		insinto /usr/$(get_libdir)/Server/include
+		doins ${S}/extras/drm/shared/drm.h
+	fi
+
+	# If we want xprint, save the init script before deleting /etc/rc.d/
+	# Requested on #68316
+	if use xprint; then
+		# RH-style init script, we provide a wrapper
+		exeinto /usr/lib/misc
+		doexe ${D}/etc/rc.d/xprint
+		# Install the wrapper
+		exeinto /etc/init.d
+		doexe ${FILES_DIR}/xprint.init
+	fi
+
+	# Remove the /etc/rc.d nonsense -- not everyone is RedHat
+	rm -rf ${D}/etc/rc.d
+
+	setup_config_files
+
+}
+
+pkg_preinst() {
+	# Do this before anything else, so we do all the rest inside the symlink
+	migrate_usr_x11r6_lib
+
+	update_config_files
+	for G_FONTDIR in ${G_FONTDIRS}; do
+		# Get rid of deprecated directories so our symlinks in the same location
+		# work -- users shouldn't be placing fonts here so that should be fine,
+		# they should be using ~/.fonts or /usr/share/fonts. <spyderous>
+		if [ -d ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts/${G_FONTDIR} ]; then
+			# local directory is for sysadmin-added fonts, so save it
+			# Note: if we did this in src_install(), we would bring fonts from
+			# the build machine to the install machine rather than just moving
+			# fonts on the install machine.
+			if [ "${G_FONTDIR}" = "local" ]; then
+				mv ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts/${G_FONTDIR} \
+					${ROOT}/usr/share/fonts/
+			else
+				rm -rf ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts/${G_FONTDIR}
+			fi
+		fi
+
+		# clean out old fonts.* and encodings.dir files, as we
+		# will regenerate them
+		# Not Speedo or CID, as their fonts.scale files are "real"
+		if [ "${G_FONTDIR}" != "CID" -a "${G_FONTDIR}" != "Speedo" ]; then
+			find ${ROOT}/usr/share/fonts/${G_FONTDIR} -type f -name 'fonts.*' \
+				-o -name 'encodings.dir' -exec rm -f {} \;
+		fi
+	done
+
+	# No longer used by xorg-x11
+	if [ -d ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts/truetype ]; then
+		rm -rf ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts/truetype
+	fi
+
+	if [ -L ${ROOT}/etc/X11/app-defaults ]; then
+		rm -f ${ROOT}/etc/X11/app-defaults
+	fi
+
+	if [ ! -L ${ROOT}/usr/$(get_libdir)/app-defaults ] \
+		&& [ -d ${ROOT}/usr/$(get_libdir)/app-defaults ]; then
+		if [ ! -d ${ROOT}/etc/X11/app-defaults ]; then
+			mkdir -p ${ROOT}/etc/X11/app-defaults
+		fi
+
+		mv -f ${ROOT}/usr/$(get_libdir)/app-defaults ${ROOT}/etc/X11
+	fi
+
+	if [ -L ${ROOT}/usr/$(get_libdir)/xkb ]; then
+		rm -f ${ROOT}/usr/$(get_libdir)/xkb
+	fi
+
+	if [ ! -L ${ROOT}/etc/X11/xkb ] \
+		&& [ -d ${ROOT}/etc/X11/xkb ]; then
+		if [ ! -d ${ROOT}/usr/$(get_libdir)/xkb ]; then
+			mkdir -p ${ROOT}/usr/$(get_libdir)
+		fi
+
+	    mv -f ${ROOT}/etc/X11/xkb ${ROOT}/usr/$(get_libdir)
+	fi
+
+	# Run this even for USE=-opengl, to clean out old stuff from possible
+	# USE=opengl build
+	clean_dynamic_libgl
+}
+
+pkg_postinst() {
+
+	local x=""
+
+	env-update
+
+	if [ "${ROOT}" = "/" ]; then
+		umask 022
+
+		font_setup
+
+		if use opengl; then
+			switch_opengl_implem
+		fi
+	fi
+
+	for x in $(find ${ROOT}/usr/$(get_libdir)/locale/ -mindepth 1 -type d); do
+		# Remove old compose files we might have created incorrectly
+		# CJK must not have that file (otherwise XIM don't works some times)
+		case $(basename ${x}) in
+			ja*|ko*|zh*)
+				if [ -r "${x}/Compose" ]; then
+					rm -f ${x}/Compose
+				fi
+				;;
+		esac
+	done
+
+	# These need to be owned by root and the correct permissions
+	# (bug #8281)
+	for x in ${ROOT}/tmp/.{ICE,X11}-unix; do
+		if [ ! -d ${x} ]; then
+			mkdir -p ${x}
+		fi
+
+		chown root:root ${x}
+		chmod 1777 ${x}
+	done
+
+	if use ppc64; then
+		#The problem about display driver is fixed.
+		cd ${ROOT}/usr/$(get_libdir)/modules/drivers
+		mv fbdev_drv.so fbdev_drv.so.orig
+		mv ati_drv.so ati_drv.so.orig
+		mv nv_drv.so nv_drv.so.orig
+
+		ld -shared -o ${ROOT}/usr/$(get_libdir)/modules/drivers/fbdev_drv.so ${ROOT}/usr/$(get_libdir)/modules/drivers/fbdev_drv.so.orig ${ROOT}/usr/$(get_libdir)/modules/linux/libfbdevhw.so ${ROOT}/usr/$(get_libdir)/modules/libshadow.so ${ROOT}/usr/$(get_libdir)/modules/libshadowfb.so ${ROOT}/usr/$(get_libdir)/modules/libfb.so
+		ld -rpath /usr/$(get_libdir)/modules/drivers -shared -o ati_drv.so ati_drv.so.orig radeon_drv.so atimisc_drv.so fbdev_drv.so r128_drv.so vga_drv.so
+		ld -rpath /usr/$(get_libdir)/modules/drivers -shared -o nv_drv.so nv_drv.so.orig fbdev_drv.so vga_drv.so
+
+		if use opengl; then
+			#The problem about DRI module and GLX module is fixed.
+			cd ${ROOT}/usr/$(get_libdir)/modules/extensions
+			mv libglx.so libglx.so.orig
+			mv libdri.so libdri.so.orig
+
+			ld -rpath /usr/$(get_libdir)/modules/extensions -shared -o libglx.so libglx.so.orig libGLcore.so
+			ld -rpath /usr/$(get_libdir)/modules/extensions -shared -o libdri.so libdri.so.orig libglx.so
+		fi
+	fi
+
+	print_info
+}
+
+pkg_prerm() {
+
+	if use ppc64; then
+		cd ${ROOT}/usr/$(get_libdir)/modules/drivers
+		mv fbdev_drv.so.orig fbdev_drv.so
+		mv ati_drv.so.orig ati_drv.so
+		mv nv_drv.so.orig nv_drv.so
+		cd ${ROOT}/usr/$(get_libdir)/modules/extensions
+		if use opengl; then
+			mv libglx.so.orig libglx.so
+			mv libdri.so.orig libdri.so
+		fi
+	fi
+}
+
+pkg_postrm() {
+
+	# Fix problematic links
+	if [ -x ${ROOT}/usr/X11R6/bin/Xorg ]; then
+		ln -snf ../X11R6/bin ${ROOT}/usr/bin/X11
+		ln -snf ../X11R6/include/X11 ${ROOT}/usr/include/X11
+		ln -snf ../X11R6/include/DPS ${ROOT}/usr/include/DPS
+		if use opengl; then
+			ln -snf ../X11R6/include/GL ${ROOT}/usr/include/GL
+		fi
+	fi
+}
+
+###############
+# pkg_setup() #
+###############
+
 cflag_setup() {
 	# Set up CFLAGS
 	filter-flags "-funroll-loops"
@@ -190,70 +685,9 @@ cflag_setup() {
 	strip-flags
 }
 
-pkg_setup() {
-	#################################################
-	### GET RID OF THIS ONCE THIS EBUILD IS READY ###
-	#################################################
-	if [ -z "${BREAKME}" ]; then
-		die "Set the BREAKME variable to emerge this. It's in development. Stop using it."
-	fi
-
-	FILES_DIR="${WORKDIR}/files"
-	PATCHDIR="${WORKDIR}/patch"
-	EXCLUDED="${PATCHDIR}/excluded"
-
-	# Set up CFLAG-related things
-	cflag_setup
-
-	# See bug #35468, circular pam-X11 dep
-	if use pam && best_version x11-base/${PN}; then
-		einfo "Previous ${PN} installation detected"
-		einfo "Enabling PAM features in ${PN}..."
-	else
-		einfo "Previous ${PN} installation NOT detected"
-		einfo "Disabling PAM features in ${PN}..."
-		einfo "You must remerge ${PN} to enable pam."
-		einfo "See http://bugs.gentoo.org/show_bug.cgi?id=35468."
-	fi
-
-	if use static || use dlloader; then
-		# A static build disallows building the SDK.
-		# See config/xf86.rules.
-		# So does a DllModules YES (use dlloader) build (#50562)
-		# The latter is pending a potential patch.
-		if use sdk; then
-			die "The static and dlloader USE flags are currently incompatible with the sdk USE flag."
-		fi
-	fi
-
-	if use dmx && use doc; then
-		die "The dmx and doc USE flags are temporarily incompatible and result in a dead build."
-	fi
-
-	if use xv && ! use opengl; then
-		eerror "See http://bugs.gentoo.org/show_bug.cgi?id=67996"
-		eerror "The xv USE flag currently requires the opengl flag."
-		die "This is a known bug. Do not report it."
-	fi
-
-	# on amd64 we need /usr/lib64/X11/locale/lib to be a symlink
-	# created by the emul lib ebuild in order for adobe acrobat, staroffice,
-	# and a few other apps to work.
-	use amd64 && get_libdir_override lib64
-	# lib32 isnt a supported configuration (yet?)
-	[ "${CONF_LIBDIR}" == "lib32" ] && get_libdir_override lib
-
-
-	# Echo a message to the user about bitmap-fonts
-	if ! use bitmap-fonts; then
-		ewarn "Please emerge this with USE=\"bitmap-fonts\" to enable"
-		ewarn "75dpi and 100dpi fonts.  Your GTK+-1.2 fonts may look"
-		ewarn "screwy otherwise"
-
-		ebeep 5
-		epause 10
-	fi
-}
+################
+# src_unpack() #
+################
 
 host_def_setup() {
 	HOSTCONF=config/cf/host.def
@@ -564,136 +998,51 @@ host_def_setup() {
 	eend 0
 }
 
-patch_setup() {
-	einfo "Excluding patches..."
-		# These have been applied upstream
-		patch_exclude 1770 1771 1772 1773
-
-		# This patch is just plain broken. Results in random failures.
-		patch_exclude 0120*parallel-make
-
-		# Hardened patches (both broken)
-		patch_exclude 9960_all_4.3.0-exec-shield-GNU
-		patch_exclude 9961_all_4.3.0-libGL-exec-shield
-
-		# Xbox nvidia driver, patch is a total hack, tears apart xc/config/cf
-		# (#68726). Only apply when necessary so we don't screw other stuff up.
-		if [ ! "${PROFILE_ARCH}" = "xbox" ]; then
-			patch_exclude 9990
-		fi
-
-		# this patch comments out the Xserver line in xdm's config
-		# We only want it here
-		if ! use s390; then
-			patch_exclude 7500
-		fi
-
-	#	if ! use gatos; then
-	#		patch_exclude 9841_all_4.3.0-gatos-mesa
-	#	fi
-
-		if use debug; then
-			patch_exclude 5901*acecad-debug
-		fi
-
-		# TDFX_RISKY - 16-bit, 1024x768 or higher on low-memory voodoo3's
-		if use 3dfx && [ "${TDFX_RISKY}" = "yes" ]; then
-			patch_exclude 5850
-		else
-			patch_exclude 5851
-		fi
-	einfo "Done excluding patches"
-}
-
-src_unpack() {
-
-	# Unpack source and patches
-	ebegin "Unpacking source"
-#		unpack ${P}.tar.bz2
-		unpack X11R${PV}-src{1,2,3,4,5}.tar.gz
-	eend 0
-
-	if use doc; then
-		ebegin "Unpacking documentation"
-			unpack X11R${PV}-src{6,7}.tar.gz
-		eend 0
-	fi
-
-	ebegin "Unpacking Gentoo files and patches"
-		unpack ${P}-files-${FILES_VER}.tar.bz2 > /dev/null
-		unpack ${P}-patches-${PATCH_VER}.tar.bz2 > /dev/null
-	eend 0
-
-	# Unpack TaD's gentoo cursors
-	ebegin "Unpacking Gentoo cursors"
-		unpack gentoo-cursors-tad-${XCUR_VER}.tar.bz2 > /dev/null
-	eend 0
-
-	# Unpack extra fonts stuff from Mandrake
-	ebegin "Unpacking fonts"
-		if use nls; then
-			unpack gemini-koi8-u.tar.bz2 > /dev/null
-		fi
-		unpack eurofonts-X11.tar.bz2 > /dev/null
-		if use font-server; then
-			unpack xfsft-encodings-${XFSFT_ENC_VER}.tar.bz2 > /dev/null
-		fi
-	eend 0
-
-	# Remove bum encoding
-	rm -f ${WORKDIR}/usr/share/fonts/encodings/urdunaqsh-0.enc
-
-	patch_setup
-
-	# Bulk patching - based on patch name
-	# Will create excluded stuff once it's needed
-	cd ${WORKDIR}
-	EPATCH_SUFFIX="patch" \
-	epatch ${PATCHDIR}
-	cd ${S}
-
-	host_def_setup
-
-	cd ${S}
-	if use doc; then
-		# These are not included anymore as they are obsolete
-		local x
-		for x in ${S}/programs/Xserver/hw/xfree86/{XF98Conf.cpp,XF98Config}; do
-			if [ -f ${x} ]; then
-				sed -i '/Load[[:space:]]*"\(pex5\|xie\)"/d' ${x}
-			fi
-		done
-	fi
+patch_setup() {
+	einfo "Excluding patches..."
+		# These have been applied upstream
+		patch_exclude 1770 1771 1772 1773
 
-}
+		# This patch is just plain broken. Results in random failures.
+		patch_exclude 0120*parallel-make
 
-src_compile() {
+		# Hardened patches (both broken)
+		patch_exclude 9960_all_4.3.0-exec-shield-GNU
+		patch_exclude 9961_all_4.3.0-libGL-exec-shield
 
-	# Set MAKEOPTS to have proper -j? option ..
-	get_number_of_jobs
+		# Xbox nvidia driver, patch is a total hack, tears apart xc/config/cf
+		# (#68726). Only apply when necessary so we don't screw other stuff up.
+		if [ ! "${PROFILE_ARCH}" = "xbox" ]; then
+			patch_exclude 9990
+		fi
 
-	# If a user defines the MAKE_OPTS variable in /etc/make.conf instead of
-	# MAKEOPTS, they'll redefine an internal xorg Makefile variable and the
-	# xorg build will silently die. This is tricky to track down, so I'm
-	# adding a preemptive fix for this issue by making sure that MAKE_OPTS is
-	# unset. (drobbins, 08 Mar 2003)
-	unset MAKE_OPTS
+		# this patch comments out the Xserver line in xdm's config
+		# We only want it here
+		if ! use s390; then
+			patch_exclude 7500
+		fi
 
-	einfo "Building xorg-x11..."
-	if use debug; then
-		chmod u+x ${S}/config/util/makeg.sh
-		FAST=1 ${S}/config/util/makeg.sh World WORLDOPTS="" \
-			|| die "debug make World failed"
-	else
-		FAST=1 emake World WORLDOPTS="" || die "make World failed"
-	fi
+	#	if ! use gatos; then
+	#		patch_exclude 9841_all_4.3.0-gatos-mesa
+	#	fi
 
-	if use nls; then
-		emake -C ${S}/nls || die "nls build failed"
-	fi
+		if use debug; then
+			patch_exclude 5901*acecad-debug
+		fi
 
+		# TDFX_RISKY - 16-bit, 1024x768 or higher on low-memory voodoo3's
+		if use 3dfx && [ "${TDFX_RISKY}" = "yes" ]; then
+			patch_exclude 5850
+		else
+			patch_exclude 5851
+		fi
+	einfo "Done excluding patches"
 }
 
+#################
+# src_install() #
+#################
+
 backward_compat_setup() {
 	# Backwards compatibility for /usr/share move
 	G_FONTDIRS="CID Speedo TTF Type1 encodings local misc util"
@@ -815,254 +1164,80 @@ setup_dynamic_libgl() {
 		# Even if libdir isnt lib, we need a lib symlink for opengl-update and
 		# friends. See bug 62990 for more info.
 		if [ "$(get_libdir)" != "lib" ]; then
-			dosym $(get_libdir) /usr/$(get_libdir)/opengl/${PN}/lib
-		fi
-	eend 0
-}
-
-strip_execs() {
-	if use debug || has nostrip ${FEATURES}; then
-		ewarn "Debug build turned on by USE=debug"
-		ewarn "NOT stripping binaries and libraries"
-	else
-		local STRIP
-		if [ ! -z "${CBUILD}" ] && [ "${CBUILD}" != "${CHOST}" ]; then
-			STRIP=${CHOST}-strip
-		else
-			STRIP=strip
-		fi
-		einfo "Stripping binaries and libraries..."
-		# This bit I got from Redhat ... strip binaries and drivers ..
-		# NOTE:  We do NOT want to strip the drivers, modules or DRI modules!
-		local x
-		for x in $(find ${D}/ -type f -perm +0111 -exec file {} \; | \
-		           grep -v ' shared object,' | \
-		           sed -n -e 's/^\(.*\):[  ]*ELF.*, not stripped/\1/p'); do
-			if [ -f ${x} ]; then
-				# Dont do the modules ...
-				if [ "${x/\/usr\/$(get_libdir)\/modules}" = "${x}" ]; then
-					echo "$(echo ${x/${D}})"
-					${STRIP} ${x} || :
-				fi
-			fi
-		done
-		# Now do the libraries ...
-		for x in ${D}/usr/{$(get_libdir),$(get_libdir)/opengl/${PN}/$(get_libdir)}/*.so.* \
-			${D}/usr/{$(get_libdir),$(get_libdir)/locale/$(get_libdir)/common}/*.so.*; do
-			if [ -f ${x} ]; then
-				echo "$(echo ${x/${D}})"
-				${STRIP} --strip-debug ${x} || :
-			fi
-		done
-	fi
-}
-
-setup_config_files() {
-
-	# Fix default config files after installing fonts to /usr/share/fonts
-	sed -i "s:/usr/X11R6/$(get_libdir)/X11/fonts:/usr/share/fonts:g" \
-		${D}/etc/X11/xorg.conf.example
-	if use font-server; then
-		sed -i "s:/usr/X11R6/$(get_libdir)/X11/fonts:/usr/share/fonts:g" \
-			${D}/etc/X11/fs/config
-	fi
-
-	# Work around upgrade problem where people have
-	# Option "XkbRules" "xfree86" in their config file
-	sed -i "s:^.*Option.*"XkbRules".*$::g" ${D}/etc/X11/xorg.conf.example
-}
-
-fix_opengl_symlinks() {
-	# Remove invalid symlinks
-	local LINK
-	for LINK in $(find ${D}/usr/$(get_libdir) \
-		-name libGL.* -type l); do
-		rm -f ${LINK}
-	done
-	# Create required symlinks
-	dosym libGL.so.1.2 /usr/$(get_libdir)/libGL.so
-	dosym libGL.so.1.2 /usr/$(get_libdir)/libGL.so.1
-	dosym libGL.so.1.2 /usr/$(get_libdir)/libMesaGL.so
-}
-
-src_install() {
-
-	unset MAKE_OPTS
-
-	einfo "Installing X.org X11..."
-	# gcc3 related fix.  Do this during install, so that our
-	# whole build will not be compiled without mmx instructions.
-	if [ "$(gcc-version)" != "2.95" ] && use x86; then
-		make install DESTDIR=${D} \
-		|| make CDEBUGFLAGS="${CDEBUGFLAGS} -mno-mmx" \
-			CXXDEBUGFLAGS="${CXXDEBUGFLAGS} -mno-mmx" \
-			install DESTDIR=${D} || die "install failed"
-	else
-		make install DESTDIR=${D} || die "install failed"
-	fi
-
-	if use sdk; then
-		einfo "Installing X.org X11 SDK..."
-		make install.sdk DESTDIR=${D} || die "sdk install failed"
-	fi
-
-	einfo "Installing man pages..."
-	make install.man DESTDIR=${D} || die "man page install failed"
-	einfo "Compressing man pages..."
-	prepman /usr
-
-	if use nls; then
-		cd ${S}/nls
-		make DESTDIR=${D} install || die "nls install failed"
-	fi
-
-	backward_compat_setup
-
-	# Fix permissions on locale/common/*.so
-	local x
-	for x in ${D}/usr/$(get_libdir)/locale/$(get_libdir)/common/*.so*; do
-		if [ -f ${x} ]; then
-			fperms 0755 ${x/${D}}
-		fi
-	done
-
-	# Fix permissions on modules ...
-	for x in $(find ${D}/usr/$(get_libdir)/modules -name '*.o' -o -name '*.so'); do
-		if [ -f ${x} ]; then
-			fperms 0755 ${x/${D}}
-		fi
-	done
-
-	# We zap our CFLAGS in the host.def file, as hardcoded CFLAGS can
-	# mess up other things that use xmkmf
-	ebegin "Fixing $(get_libdir)/config/host.def"
-		cp ${D}/usr/$(get_libdir)/config/host.def ${T}
-		awk '!/OptimizedCDebugFlags|OptimizedCplusplusDebugFlags|GccWarningOptions/ {print $0}' \
-			${T}/host.def > ${D}/usr/$(get_libdir)/config/host.def \
-			|| eerror "Munging host.def failed"
-		# theoretically, /usr/lib/X11/config is a possible candidate for
-		# config file management. If we find that people really worry about imake
-		# stuff, we may add it.  But for now, we leave the dir unprotected.
-	eend 0
-
-	# EURO support
-	ebegin "Euro Support..."
-		LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${D}/usr/$(get_libdir)" \
-		${D}/usr/X11R6/bin/bdftopcf -t ${WORKDIR}/Xlat9-8x14.bdf | \
-			gzip -9 > ${D}/usr/share/fonts/misc/Xlat9-8x14-lat9.pcf.gz
-		LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${D}/usr/$(get_libdir)" \
-		${D}/usr/X11R6/bin/bdftopcf -t ${WORKDIR}/Xlat9-9x16.bdf | \
-			gzip -9 > ${D}/usr/share/fonts/misc/Xlat9-9x16-lat9.pcf.gz
-		LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${D}/usr/$(get_libdir)" \
-		${D}/usr/X11R6/bin/bdftopcf -t ${WORKDIR}/Xlat9-10x20.bdf | \
-			gzip -9 > ${D}/usr/share/fonts/misc/Xlat9-10x20-lat9.pcf.gz
-	eend 0
-
-	# Standard symlinks
-	dodir /usr/{bin,include,$(get_libdir)}
-	dosym ../X11R6/bin /usr/bin/X11
-	dosym ../X11R6/include/X11 /usr/include/X11
-	dosym ../X11R6/include/DPS /usr/include/DPS
-	dosym ../X11R6/include/GL /usr/include/GL
-	dosym ../../usr/$(get_libdir)/xkb /etc/X11/xkb
-	# Added one to reflect xkb move from /usr/X11R6/lib/X11/xkb to /usr/lib/xkb
-	dosym ../../lib/xkb /usr/X11R6/lib/X11/xkb
-
-	if use opengl; then
-		fix_opengl_symlinks
-	fi
-
-	# Some critical directories
-	keepdir /var/lib/xdm
-	dosym ../../../var/lib/xdm /etc/X11/xdm/authdir
-
-	# .la files for libtool support
-	insinto /usr/$(get_libdir)
-	doins ${FILES_DIR}/$(get_libdir)/*.la
-
-	# Backwards compat, FHS, etc.
-	dosym ../../usr/X11R6/bin/Xorg /etc/X11/X
-
-	# Fix perms
-	fperms 755 /usr/$(get_libdir)/xkb/geometry/sgi /usr/X11R6/bin/dga
-
-	compose_files_setup
-
-	# Yet more Mandrake
-	if use font-server; then
-		ebegin "Encoding files for xfsft font server..."
-			dodir /usr/share/fonts/encodings
-			cp -a ${WORKDIR}/usr/share/fonts/encodings/* \
-				${D}/usr/share/fonts/encodings
-
-			for x in ${D}/usr/share/fonts/encodings/{.,large}/*.enc; do
-				[ -f "${x}" ] && gzip -9 -f ${x} \
-					|| eerror "gzipping ${x} failed"
-			done
-		eend 0
-	fi
-
-	if use nls; then
-		ebegin "gemini-koi8 fonts..."
-			cd ${WORKDIR}/ukr
-			gunzip *.Z || eerror "gunzipping gemini-koi8 fonts failed"
-			gzip -9 *.pcf || eerror "gzipping gemini-koi8 fonts failed"
-			cd ${S}
-			cp -a ${WORKDIR}/ukr ${D}/usr/share/fonts \
-				|| eerror "copying gemini-koi8 fonts failed"
-		eend 0
-	fi
-
-	etc_files_install
-
-	# We move libGLU to /usr/lib now
-	dosym libGLU.so.1.3 /usr/$(get_libdir)/libMesaGLU.so
+			dosym $(get_libdir) /usr/$(get_libdir)/opengl/${PN}/lib
+		fi
+	eend 0
+}
 
-	if use opengl; then
-		setup_dynamic_libgl
+strip_execs() {
+	if use debug || has nostrip ${FEATURES}; then
+		ewarn "Debug build turned on by USE=debug"
+		ewarn "NOT stripping binaries and libraries"
+	else
+		local STRIP
+		if [ ! -z "${CBUILD}" ] && [ "${CBUILD}" != "${CHOST}" ]; then
+			STRIP=${CHOST}-strip
+		else
+			STRIP=strip
+		fi
+		einfo "Stripping binaries and libraries..."
+		# This bit I got from Redhat ... strip binaries and drivers ..
+		# NOTE:  We do NOT want to strip the drivers, modules or DRI modules!
+		local x
+		for x in $(find ${D}/ -type f -perm +0111 -exec file {} \; | \
+		           grep -v ' shared object,' | \
+		           sed -n -e 's/^\(.*\):[  ]*ELF.*, not stripped/\1/p'); do
+			if [ -f ${x} ]; then
+				# Dont do the modules ...
+				if [ "${x/\/usr\/$(get_libdir)\/modules}" = "${x}" ]; then
+					echo "$(echo ${x/${D}})"
+					${STRIP} ${x} || :
+				fi
+			fi
+		done
+		# Now do the libraries ...
+		for x in ${D}/usr/{$(get_libdir),$(get_libdir)/opengl/${PN}/$(get_libdir)}/*.so.* \
+			${D}/usr/{$(get_libdir),$(get_libdir)/locale/$(get_libdir)/common}/*.so.*; do
+			if [ -f ${x} ]; then
+				echo "$(echo ${x/${D}})"
+				${STRIP} --strip-debug ${x} || :
+			fi
+		done
 	fi
+}
 
-	# Make the core cursor the default.  People seem not to like whiteglass
-	# for some reason.
-	dosed 's:whiteglass:core:' /usr/share/cursors/${PN}/default/index.theme
-
-	strip_execs
-
-	# Install TaD's gentoo cursors
-	insinto /usr/share/cursors/${PN}/gentoo/cursors
-	doins ${WORKDIR}/cursors/gentoo/cursors/*
-	insinto /usr/share/cursors/${PN}/gentoo-blue/cursors
-	doins ${WORKDIR}/cursors/gentoo-blue/cursors/*
-	insinto /usr/share/cursors/${PN}/gentoo-silver/cursors
-	doins ${WORKDIR}/cursors/gentoo-silver/cursors/*
-
-	# Remove xterm app-defaults, since we don't install xterm
-#	rm ${D}/etc/X11/app-defaults/{UXTerm,XTerm,XTerm-color}
-
-	# For Battoussai's gatos stuffs:
-	if use sdk; then
-		insinto /usr/$(get_libdir)/Server/include
-		doins ${S}/extras/drm/shared/drm.h
-	fi
+setup_config_files() {
 
-	# If we want xprint, save the init script before deleting /etc/rc.d/
-	# Requested on #68316
-	if use xprint; then
-		# RH-style init script, we provide a wrapper
-		exeinto /usr/lib/misc
-		doexe ${D}/etc/rc.d/xprint
-		# Install the wrapper
-		exeinto /etc/init.d
-		doexe ${FILES_DIR}/xprint.init
+	# Fix default config files after installing fonts to /usr/share/fonts
+	sed -i "s:/usr/X11R6/$(get_libdir)/X11/fonts:/usr/share/fonts:g" \
+		${D}/etc/X11/xorg.conf.example
+	if use font-server; then
+		sed -i "s:/usr/X11R6/$(get_libdir)/X11/fonts:/usr/share/fonts:g" \
+			${D}/etc/X11/fs/config
 	fi
 
-	# Remove the /etc/rc.d nonsense -- not everyone is RedHat
-	rm -rf ${D}/etc/rc.d
-
-	setup_config_files
+	# Work around upgrade problem where people have
+	# Option "XkbRules" "xfree86" in their config file
+	sed -i "s:^.*Option.*"XkbRules".*$::g" ${D}/etc/X11/xorg.conf.example
+}
 
+fix_opengl_symlinks() {
+	# Remove invalid symlinks
+	local LINK
+	for LINK in $(find ${D}/usr/$(get_libdir) \
+		-name libGL.* -type l); do
+		rm -f ${LINK}
+	done
+	# Create required symlinks
+	dosym libGL.so.1.2 /usr/$(get_libdir)/libGL.so
+	dosym libGL.so.1.2 /usr/$(get_libdir)/libGL.so.1
+	dosym libGL.so.1.2 /usr/$(get_libdir)/libMesaGL.so
 }
 
+#################
+# pkg_preinst() #
+#################
+
 migrate_usr_x11r6_lib() {
 	# We need a symlink from /usr/X11R6/lib -> /usr/lib so all the packages
 	# whose files we move don't lose track of them. As such, we need
@@ -1166,72 +1341,9 @@ clean_dynamic_libgl() {
 		${ROOT}/usr/$(get_libdir)/libGL*
 }
 
-pkg_preinst() {
-	# Do this before anything else, so we do all the rest inside the symlink
-	migrate_usr_x11r6_lib
-
-	update_config_files
-	for G_FONTDIR in ${G_FONTDIRS}; do
-		# Get rid of deprecated directories so our symlinks in the same location
-		# work -- users shouldn't be placing fonts here so that should be fine,
-		# they should be using ~/.fonts or /usr/share/fonts. <spyderous>
-		if [ -d ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts/${G_FONTDIR} ]; then
-			# local directory is for sysadmin-added fonts, so save it
-			# Note: if we did this in src_install(), we would bring fonts from
-			# the build machine to the install machine rather than just moving
-			# fonts on the install machine.
-			if [ "${G_FONTDIR}" = "local" ]; then
-				mv ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts/${G_FONTDIR} \
-					${ROOT}/usr/share/fonts/
-			else
-				rm -rf ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts/${G_FONTDIR}
-			fi
-		fi
-
-		# clean out old fonts.* and encodings.dir files, as we
-		# will regenerate them
-		# Not Speedo or CID, as their fonts.scale files are "real"
-		if [ "${G_FONTDIR}" != "CID" -a "${G_FONTDIR}" != "Speedo" ]; then
-			find ${ROOT}/usr/share/fonts/${G_FONTDIR} -type f -name 'fonts.*' \
-				-o -name 'encodings.dir' -exec rm -f {} \;
-		fi
-	done
-
-	# No longer used by xorg-x11
-	if [ -d ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts/truetype ]; then
-		rm -rf ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts/truetype
-	fi
-
-	if [ -L ${ROOT}/etc/X11/app-defaults ]; then
-		rm -f ${ROOT}/etc/X11/app-defaults
-	fi
-
-	if [ ! -L ${ROOT}/usr/$(get_libdir)/app-defaults ] \
-		&& [ -d ${ROOT}/usr/$(get_libdir)/app-defaults ]; then
-		if [ ! -d ${ROOT}/etc/X11/app-defaults ]; then
-			mkdir -p ${ROOT}/etc/X11/app-defaults
-		fi
-
-		mv -f ${ROOT}/usr/$(get_libdir)/app-defaults ${ROOT}/etc/X11
-	fi
-
-	if [ -L ${ROOT}/usr/$(get_libdir)/xkb ]; then
-		rm -f ${ROOT}/usr/$(get_libdir)/xkb
-	fi
-
-	if [ ! -L ${ROOT}/etc/X11/xkb ] \
-		&& [ -d ${ROOT}/etc/X11/xkb ]; then
-		if [ ! -d ${ROOT}/usr/$(get_libdir)/xkb ]; then
-			mkdir -p ${ROOT}/usr/$(get_libdir)
-		fi
-
-	    mv -f ${ROOT}/etc/X11/xkb ${ROOT}/usr/$(get_libdir)
-	fi
-
-	# Run this even for USE=-opengl, to clean out old stuff from possible
-	# USE=opengl build
-	clean_dynamic_libgl
-}
+##################
+# pkg_postinst() #
+##################
 
 font_setup() {
 	# These cause ttmkfdir to segfault :/
@@ -1394,94 +1506,3 @@ switch_opengl_implem() {
 		fi
 }
 
-pkg_postinst() {
-
-	local x=""
-
-	env-update
-
-	if [ "${ROOT}" = "/" ]; then
-		umask 022
-
-		font_setup
-
-		if use opengl; then
-			switch_opengl_implem
-		fi
-	fi
-
-	for x in $(find ${ROOT}/usr/$(get_libdir)/locale/ -mindepth 1 -type d); do
-		# Remove old compose files we might have created incorrectly
-		# CJK must not have that file (otherwise XIM don't works some times)
-		case $(basename ${x}) in
-			ja*|ko*|zh*)
-				if [ -r "${x}/Compose" ]; then
-					rm -f ${x}/Compose
-				fi
-				;;
-		esac
-	done
-
-	# These need to be owned by root and the correct permissions
-	# (bug #8281)
-	for x in ${ROOT}/tmp/.{ICE,X11}-unix; do
-		if [ ! -d ${x} ]; then
-			mkdir -p ${x}
-		fi
-
-		chown root:root ${x}
-		chmod 1777 ${x}
-	done
-
-	if use ppc64; then
-		#The problem about display driver is fixed.
-		cd ${ROOT}/usr/$(get_libdir)/modules/drivers
-		mv fbdev_drv.so fbdev_drv.so.orig
-		mv ati_drv.so ati_drv.so.orig
-		mv nv_drv.so nv_drv.so.orig
-
-		ld -shared -o ${ROOT}/usr/$(get_libdir)/modules/drivers/fbdev_drv.so ${ROOT}/usr/$(get_libdir)/modules/drivers/fbdev_drv.so.orig ${ROOT}/usr/$(get_libdir)/modules/linux/libfbdevhw.so ${ROOT}/usr/$(get_libdir)/modules/libshadow.so ${ROOT}/usr/$(get_libdir)/modules/libshadowfb.so ${ROOT}/usr/$(get_libdir)/modules/libfb.so
-		ld -rpath /usr/$(get_libdir)/modules/drivers -shared -o ati_drv.so ati_drv.so.orig radeon_drv.so atimisc_drv.so fbdev_drv.so r128_drv.so vga_drv.so
-		ld -rpath /usr/$(get_libdir)/modules/drivers -shared -o nv_drv.so nv_drv.so.orig fbdev_drv.so vga_drv.so
-
-		if use opengl; then
-			#The problem about DRI module and GLX module is fixed.
-			cd ${ROOT}/usr/$(get_libdir)/modules/extensions
-			mv libglx.so libglx.so.orig
-			mv libdri.so libdri.so.orig
-
-			ld -rpath /usr/$(get_libdir)/modules/extensions -shared -o libglx.so libglx.so.orig libGLcore.so
-			ld -rpath /usr/$(get_libdir)/modules/extensions -shared -o libdri.so libdri.so.orig libglx.so
-		fi
-	fi
-
-	print_info
-}
-
-pkg_prerm() {
-
-	if use ppc64; then
-		cd ${ROOT}/usr/$(get_libdir)/modules/drivers
-		mv fbdev_drv.so.orig fbdev_drv.so
-		mv ati_drv.so.orig ati_drv.so
-		mv nv_drv.so.orig nv_drv.so
-		cd ${ROOT}/usr/$(get_libdir)/modules/extensions
-		if use opengl; then
-			mv libglx.so.orig libglx.so
-			mv libdri.so.orig libdri.so
-		fi
-	fi
-}
-
-pkg_postrm() {
-
-	# Fix problematic links
-	if [ -x ${ROOT}/usr/X11R6/bin/Xorg ]; then
-		ln -snf ../X11R6/bin ${ROOT}/usr/bin/X11
-		ln -snf ../X11R6/include/X11 ${ROOT}/usr/include/X11
-		ln -snf ../X11R6/include/DPS ${ROOT}/usr/include/DPS
-		if use opengl; then
-			ln -snf ../X11R6/include/GL ${ROOT}/usr/include/GL
-		fi
-	fi
-}
-- 
2.26.2