From b1b6c17aa396cad19b68e065968bd2e64cb58b24 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Mon, 28 May 2012 10:40:42 +0100 Subject: [PATCH] amplc_dio200: Change description of counter interrupt sources In the device description comment, change the table of interrupt sources for counter output interrupt sources to make it clearer that channel 1 is the interrupt source. Signed-off-by: Ian Abbott --- comedi/drivers/amplc_dio200.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/comedi/drivers/amplc_dio200.c b/comedi/drivers/amplc_dio200.c index 04716c51..27c1375d 100644 --- a/comedi/drivers/amplc_dio200.c +++ b/comedi/drivers/amplc_dio200.c @@ -176,20 +176,20 @@ INTERRUPT SOURCES Sources 6 1 6 0 PPI-X-C0 JUMPER-J5 PPI-X-C0 1 PPI-X-C3 PPI-X-C3 - 2 CTR-Y1-OUT PPI-Y-C0 - 3 CTR-Y2-OUT PPI-Y-C3 - 4 CTR-Z1-OUT CTR-Z1-OUT - 5 CTR-Z2-OUT CTR-Z2-OUT + 2 CTR-Y1-OUT1 PPI-Y-C0 + 3 CTR-Y2-OUT1 PPI-Y-C3 + 4 CTR-Z1-OUT1 CTR-Z1-OUT1 + 5 CTR-Z2-OUT1 CTR-Z2-OUT1 PCIe215 PC218E PCIe236 ------------- ------------- ------------- Sources 6 6 6 - 0 PPI-X-C0 CTR-X1-OUT PPI-X-C0 - 1 PPI-X-C3 CTR-X2-OUT PPI-X-C3 - 2 PPI-Y-C0 CTR-Y1-OUT unused - 3 PPI-Y-C3 CTR-Y2-OUT unused - 4 CTR-Z1-OUT CTR-Z1-OUT CTR-Z1-OUT - 5 CTR-Z2-OUT CTR-Z2-OUT CTR-Z2-OUT + 0 PPI-X-C0 CTR-X1-OUT1 PPI-X-C0 + 1 PPI-X-C3 CTR-X2-OUT1 PPI-X-C3 + 2 PPI-Y-C0 CTR-Y1-OUT1 unused + 3 PPI-Y-C3 CTR-Y2-OUT1 unused + 4 CTR-Z1-OUT1 CTR-Z1-OUT1 CTR-Z1-OUT1 + 5 CTR-Z2-OUT1 CTR-Z2-OUT1 CTR-Z2-OUT1 PC272E/PCI272 PCIe296 ------------- ------------- @@ -198,8 +198,8 @@ INTERRUPT SOURCES 1 PPI-X-C3 PPI-X1-C3 2 PPI-Y-C0 PPI-Y1-C0 3 PPI-Y-C3 PPI-Y2-C3 - 4 PPI-Z-C0 CTR-Z1-OUT - 5 PPI-Z-C3 CTR-Z2-OUT + 4 PPI-Z-C0 CTR-Z1-OUT1 + 5 PPI-Z-C3 CTR-Z2-OUT1 When an interrupt source is enabled in the interrupt source enable register, a rising edge on the source signal latches the corresponding -- 2.26.2