From 52e08c30d3a59c3ad650f2ce9e61e0a1a57cb75c Mon Sep 17 00:00:00 2001 From: Theodore Tso Date: Fri, 29 Mar 1991 16:39:23 +0000 Subject: [PATCH] *** empty log message *** git-svn-id: svn://anonsvn.mit.edu/krb5/trunk@1975 dc483132-0cff-0310-8789-dd5450dbe970 --- doc/api/krb5.tex | 277 ++++++++++++++++++++++++++++++++++++-- doc/api/libos.tex | 63 ++++++++- doc/implement/libos-i.tex | 63 ++++++++- 3 files changed, 377 insertions(+), 26 deletions(-) diff --git a/doc/api/krb5.tex b/doc/api/krb5.tex index a02318c3d..25955b9fe 100644 --- a/doc/api/krb5.tex +++ b/doc/api/krb5.tex @@ -339,6 +339,8 @@ Returns system errors. \funcarg{krb5_checksum *}{checksum} \funcarg{krb5_ticket_times *}{times} \funcarg{krb5_flags}{kdc_options} +\funcarg{krb5_int32}{sequence} +\funcarg{krb5_keyblock **}{newkey} \funcarg{krb5_ccache}{ccache} \funcinout \funcarg{krb5_creds *}{creds} @@ -348,7 +350,7 @@ Returns system errors. \end{funcdecl} Formats a KRB_AP_REQ message into \funcparam{outbuf}, with more complete -options than \funcname{krb5_mk_req}.a +options than \funcname{krb5_mk_req}. \funcparam{outbuf}, \funcparam{ap_req_options}, \funcparam{checksum}, and \funcparam{ccache} are used in the same fashion as for @@ -367,6 +369,14 @@ appropriate KDC. \funcparam{ap_req_options} specifies the KRB_AP_REQ options desired. +\funcparam{sequence}, if non-zero, specifies the initial sequence number +which the caller will use for KRB_SAFE or KRB_PRIV messages. + +\funcparam{newkey}, if non-NULL, will be filled in upon return with a +sub-session key that the caller can use to protect future KRB_SAFE or +KRB_PRIV messages. When the caller is finished with the key, it should +be freed with \funcname{krb5_free_keyblock}. + If \funcparam{ap_req_options} specifies AP_OPTS_USE_SESSION_KEY, then \funcparam{creds{\ptsto}ticket} must contain the appropriate ENC-TKT-IN-SKEY ticket. @@ -374,7 +384,8 @@ ENC-TKT-IN-SKEY ticket. \funcparam{checksum} specifies the checksum to be used in the authenticator. -If \funcparam{authentp} is non-NULL, it krb5_mk_req_extended will store +If \funcparam{authentp} is non-NULL, \funcname{krb5_mk_req_extended} +will store a copy of authenticator there, with the principal and checksum fields nulled out. (This is to prevent pointer sharing problems; the caller shouldn't need these fields anyway, since the caller supplied them.) @@ -389,15 +400,33 @@ credentials; the entire credentials should be released by calling Returns system errors. +\begin{funcdecl}{krb5_generate_subkey}{krb5_error_code}{\funcin} +\funcarg{const krb5_keyblock *}{key} +\funcout +\funcarg{krb5_keyblock **}{subkey} +\end{funcdecl} + +Generates a pseudo-random sub-session key using the encryption system's +random key functions, based on the input \funcparam{key}. + +\funcparam{subkey} is filled in to point to the generated subkey, unless +an error is returned. The returned key is allocated and should be freed +by the caller with \funcname{krb5_free_keyblock} when it is no longer +needed. + \begin{funcdecl}{krb5_rd_req_simple}{krb5_error_code}{\funcin} \funcarg{const krb5_data *}{inbuf} \funcarg{krb5_const_principal}{server} \funcarg{const krb5_address *}{sender_addr} \funcout -\funcarg{krb5_tkt_authent *}{authdat} +\funcarg{krb5_tkt_authent **}{authdat} \end{funcdecl} -Parses a KRB_AP_REQ message, returning its contents. +Parses a KRB_AP_REQ message, returning its contents. Upon exiting, +\funcparam{*authdat} will be modified to point to allocated storage +containing the ticket and authenticator information. The caller is +responsible for deallocating this space by using +\funcname{krb5_free_tkt_authent}. \funcparam{server} specifies the expected server's name for the ticket. @@ -431,11 +460,14 @@ Returns system errors, encryption errors, replay errors. \funcinout \funcarg{krb5_rcache}{rcache} \funcout -\funcarg{krb5_tkt_authent *}{authdat} +\funcarg{krb5_tkt_authent **}{authdat} \end{funcdecl} - -Parses a KRB_AP_REQ message, returning its contents. +Parses a KRB_AP_REQ message, returning its contents. Upon exiting, +\funcparam{*authdat} will be modified to point to allocated storage +containing the ticket and authenticator information. The caller is +responsible for deallocating this space by using +\funcname{krb5_free_tkt_authent}. \funcparam{server} specifies the expected server's name for the ticket. If \funcparam{server} is NULL, then any server name will be accepted if @@ -477,7 +509,7 @@ Returns system errors, encryption errors, replay errors. \funcarg{krb5_pointer}{keyprocarg} \funcarg{krb5_rcache}{rcache} \funcout -\funcarg{krb5_tkt_authent *}{authdat} +\funcarg{krb5_tkt_authent **}{authdat} \end{funcdecl} Essentially the same as \funcname{krb5_rd_req}, but uses a decoded AP_REQ @@ -503,11 +535,13 @@ Returns system errors. \funcarg{const krb5_data *}{inbuf} \funcarg{const krb5_keyblock *}{kblock} \funcout -\funcarg{krb5_ap_rep_enc_part *}{repl} +\funcarg{krb5_ap_rep_enc_part **}{repl} \end{funcdecl} Parses and decrypts an AP_REP message from \funcparam{*inbuf}, filling in -the values in \funcparam{*repl} with the values from the message. +\funcparam{*repl} with a pointer allocating storage containing the +values from the message. The caller is responsible for freeing this +structure with \funcname{krb5_free_ap_rep_enc_part}. The key in \funcparam{*kblock} is used to decrypt the message. @@ -530,11 +564,13 @@ Returns system errors. \begin{funcdecl}{krb5_rd_error}{krb5_error_code}{\funcin} \funcarg{krb5_data *}{enc_errbuf} \funcout -\funcarg{krb5_error *}{dec_error} +\funcarg{krb5_error **}{dec_error} \end{funcdecl} -Parses an error message from \funcparam{enc_errbuf} and fills in the -contents of \funcparam{dec_error}. +Parses an error message from \funcparam{enc_errbuf} and fills in +\funcparam{*dec_error} with a pointer to allocated storage containing +the error message. The caller is reponsible for free this structure by +using \funcname{krb5_free_error}. Upon return \funcparam{dec_error{\ptsto}client}, \funcparam{dec_error{\ptsto}server}, and @@ -543,12 +579,149 @@ storage which the caller should free when finished. Returns system errors. +\begin{funcdecl}{krb5_generate_seq_number}{krb5_error_code}{\funcin} +\funcarg{const krb5_keyblock *}{key} +\funcout +\funcarg{krb5_int32 *}{seqno} +\end{funcdecl} + +Generates a pseudo-random sequence number suitable for use as an initial +sequence number for the KRB_SAFE and KRB_PRIV message processing +routines. + +\funcparam{key} parameterizes the choice of the random sequence number, +which is filled into \funcparam{*seqno} upon return. + +\begin{funcdecl}{krb5_sendauth}{krb5_error_code} +\funcin +\funcarg{krb5_pointer}{fd} +\funcarg{char *}{appl_version} +\funcarg{krb5_principal}{client} +\funcarg{krb5_principal}{server} +\funcarg{krb5_flags}{ap_req_options} +\funcarg{krb5_checksum *}{checksump} +\funcinout +\funcarg{krb5_creds *}{credsp} +\funcarg{krb5_ccache}{ccache} +\funcout +\funcarg{krb5_int32 *}{sequence} +\funcarg{krb5_keyblock **}{newkey} +\funcarg{krb5_error **}{error} +\funcarg{krb5_ap_rep_enc_part **}{rep_result} +\end{funcdecl} + +\funcname{krb5_sendauth} provides a convenient means for client and +server programs to send authenticated messages to one another through +network connections. \funcname{krb5_sendauth} sends an authenticated +ticket from the client program to the server program using the network +connection specified by \funcparam{fd}. In the MIT Unix implementation, +\funcparam{fd} should be a pointer to a file descriptor describing the +network socket. This can be changed in other implementations, however, +if the routines \funcname{krb5_read_message}, +\funcname{krb5_write_message}, \funcname{krb5_net_read}, and +\funcname{krb5_net_write} are changed.\footnote{Well, this isn't quite +true; the interfaces for \funcname{krb5_net_read} and +\funcname{krb5_net_write} currently take an integer instead of a pointer +to an integer, but this will be fixed soon\ldots} + +The paramter \funcparam{appl_version} is a string describing the +application protocol version which the client is expecting to use for +this exchange. If the server is using a different application protocol, +an error will be returned. + +The parameters \funcparam{client} and \funcparam{server} specify the +kerberos principals for the client and the server. The +\funcparam{ap_req_options} parameters specifies the options which should +be passed to \funcname{krb5_mk_ap_req}. If \funcparam{ap_req_options} +specifies AP_OPTS_MUTUAL_REQUIRED, then \funcname{krb5_sendauth} will +perform a mutual authentication exchange, and if \funcparam{rep_result} +is non-zero, it will be filled in with the result of the mutual +authentication exchange. + +The \funcparam{checksump} paramter is optional; if it is non-zero, then the +checksum structure will be sent to the server as part of the +authenticated ticket exchange. + +If \funcparam{credsp} is nonzero and contains a valid credentials then +the client credentials will be obtained from the structure pointed to by +\funcparam{credsp}. If not, then \funcparam{ccache} must contain a +credentials cache handle where the required credentials can be fetched. + +If non-zero, \funcparam{sequence} is filled in with the sequence number +which the client should use for sending or receiving messages generated +using \funcname{krb5_mk_safe} and \funcname{krb5_mk_priv}. The sequence +number for the server can be determined by looking in the structured +filled in by \funcparam{rep_result}, if mutual authentication was used. +(If mutual authentication was not used, there is no way to negotiate a +sequence number for the server.) + +If an error occurs during the authenticated ticket exchange, the error +packet that was sent from the server will be filled into +\funcparam{error}, if \funcparam{error} is non-zero. + +\begin{funcdecl}{krb5_recvauth}{krb5_error_code} +\funcin +\funcarg{krb5_pointer}{fd} +\funcarg{char *}{appl_version} +\funcarg{krb5_principal}{server} +\funcarg{krb5_address *}{sender_addr} +\funcarg{krb5_pointer}{fetchfrom} +\funcarg{krb5_rdreq_key_proc}{keyproc} +\funcarg{krb5_pointer}{keyprocarg} +\funcarg{char *}{rc_type} +\funcout +\funcarg{krb5_int32 *}{sequence} +\funcarg{krb5_principal *}{client} +\funcarg{krb5_ticket **}{krb5_ticket} +\funcarg{krb5_authenticator **}{authent} +\end{funcdecl} + +\funcname{krb5_sendauth} provides a convenient means for client and +server programs to send authenticated messages to one another through +network connections. \funcname{krb5_recvauth} receives the ticket from +sent by \funcparam{krb5_sendauth}, and, if requested by the client, will +perform mutual authentication to prove to the client that the server +represented by \funcparam{krb5_recvauth} is legitimate. + +\funcparam{fd} is a pointer to the network connection. As in +\funcname{krb5_sendauth}, \funcparam{fd} is a pointer to a file +descriptor in the MIT Unix implementation. + +The parameter \funcparam{appl_version} is a string describing the +application protocol version which the server is expecting to use for +this exchange. If the client is using a different application protocol, +an error will be returned and the authentication exchange will be +aborted. + +The parameters \funcparam{fetchfrom}, \funcparam{keyproc}, and +\funcparam{keyprocarg} are used by \funcname{krb5_rd_req} to obtain the +server's private key. + +\funcparam{rc_type} is a string which determins which type of replace +cache \funcname{krb5_recvauth} should use. \funcname{krb5_recvauth} +uses a standard convention for determining the name of the replay cache +to be used. + +All of the output paramters are optional and they are only filled in if +they are non-NULL. \funcparam{sequence} is filled in with the +sequence number which the server should use (if desired) for sending or +receiving message using \funcname{krb5_mk_safe} and +\funcname{krb5_mk_priv}. The client's sequence number is passed back +as part of the authenticator structure which is filled in if +\funcparam{authent} is nonzero. + +\funcparam{client} is filled in with the client principal which +initiated the authenticated connection. + \begin{funcdecl}{krb5_mk_safe}{krb5_error_code}{\funcin} \funcarg{krb5_data *}{userdata} \funcarg{krb5_cksumtype}{sumtype} \funcarg{krb5_keyblock *}{key,} \funcarg{krb5_fulladdr *}{sender_addr} \funcarg{krb5_fulladdr *}{recv_addr} +\funcarg{krb5_int32}{seq_number} +\funcarg{krb5_int32}{safe_flags} +\funcarg{krb5_rcache}{rcache} \funcout \funcarg{krb5_data *}{outbuf} \end{funcdecl} @@ -563,6 +736,16 @@ addresses (host and port) of the sender and receiver. The host portion of \funcparam{sender_addr} is used to form the addresses used in the KRB_SAFE message. +\funcparam{safe_flags} selects whether sequence numbers or timestamps +should be used to identify the message. If timestamps are to be used, +an entry describing the message will be entered in the replay cache +\funcparam{rcache} so that the caller may detect if this message is sent +back to him by an attacker. + +The functions \funcname{krb5_gen_replay_name} and +\funcname{krb5_get_server_rcache} can be used to open a replay cache +appropriate to use as \funcparam{rcache}. + The \funcparam{outbuf} buffer storage is allocated, and should be freed by the caller when finished. @@ -573,6 +756,10 @@ Returns system errors. \funcarg{krb5_keyblock *}{key} \funcarg{krb5_fulladdr *}{sender_addr} \funcarg{krb5_fulladdr *}{recv_addr} +\funcarg{krb5_int32}{seq_number} +\funcarg{krb5_int32}{safe_flags} +\funcinout +\funcarg{krb5_rcache}{rcache} \funcout \funcarg{krb5_data *}{outbuf} \end{funcdecl} @@ -588,6 +775,17 @@ addresses (host and port) of the sender and receiver. \funcparam{outbuf} points to allocated storage which the caller should free when finished. +If \funcparam{safe_flags} indicates that sequence numbers are to be +used, \funcparam{seq_number} is used as the sequence number for the +message. If this is not the case, a timestamp is inserted in the +message, and \funcparam{sender_addr} must be of type +\datatype{ADDRTYPE_ADDRPORT}, and the message is checked for replays +against the cache entries in \funcparam{rcache}. + +The function \funcname{krb5_get_server_rcache} and the service-name +portion of the server principal name can be used to open a +replay cache appropriate to use as \funcparam{rcache}. + Returns system errors, integrity errors. \begin{funcdecl}{krb5_mk_priv}{krb5_error_code}{\funcin} @@ -596,6 +794,9 @@ Returns system errors, integrity errors. \funcarg{krb5_keyblock *}{key} \funcarg{krb5_fulladdr *}{sender_addr} \funcarg{krb5_fulladdr *}{recv_addr} +\funcarg{krb5_int32}{seq_number} +\funcarg{krb5_int32}{priv_flags} +\funcarg{krb5_rcache}{rcache} \funcinout \funcarg{krb5_pointer}{i_vector} \funcout @@ -614,6 +815,16 @@ sender and receiver. encryption, and if non-NULL its contents are replaced with the last block of the encrypted data upon exit. +\funcparam{priv_flags} selects whether sequence numbers or timestamps +should be used to identify the message. If timestamps are to be used, +an entry describing the message will be entered in the replay cache +\funcparam{rcache} so that the caller may detect if this message is sent +back to him by an attacker. + +The functions \funcname{krb5_gen_replay_name} and +\funcname{krb5_get_server_rcache} can be used to open a replay cache +appropriate to use as \funcparam{rcache}. + The \funcparam{outbuf} buffer storage is allocated, and should be freed by the caller when finished. @@ -624,8 +835,11 @@ Returns system errors. \funcarg{krb5_keyblock *}{key} \funcarg{krb5_fulladdr *}{sender_addr} \funcarg{krb5_fulladdr *}{recv_addr} +\funcarg{krb5_int32}{seq_number} +\funcarg{krb5_int32}{priv_flags} \funcinout \funcarg{krb5_pointer}{i_vector} +\funcarg{krb5_rcache}{rcache} \funcout \funcarg{krb5_data *}{outbuf} \end{funcdecl} @@ -645,6 +859,17 @@ free when finished. encryption, and if non-NULL its contents are replaced with the last block of the encrypted data upon exit. +If \funcparam{priv_flags} indicates that sequence numbers are to be +used, \funcparam{seq_number} is used as the sequence number for the +message. If this is not the case, a timestamp is inserted in the +message, and \funcparam{sender_addr} must be of type +\datatype{ADDRTYPE_ADDRPORT}, and the message is checked for replays +against the cache entries in \funcparam{rcache}. + +The function \funcname{krb5_get_server_rcache} and the service-name +portion of the server principal name can be used to open a +replay cache appropriate to use as \funcparam{rcache}. + Returns system errors, integrity errors. \begin{funcdecl}{krb5_parse_name}{krb5_error_code}{\funcin} @@ -716,11 +941,22 @@ $< 0$ if first is less than 2nd, $> 0$ if first is greater than 2nd. \begin{funcdecl}{krb5_copy_keyblock}{krb5_error_code}{\funcin} \funcarg{krb5_keyblock *}{from} \funcout +\funcarg{krb5_keyblock **}{to} +\end{funcdecl} + +Copy a keyblock, filling in \funcparam{*to} to point to the newly +allocated copy, which should be freed with +\funcname{krb5_free_keyblock}. + +\begin{funcdecl}{krb5_copy_keyblock_contents}{krb5_error_code}{\funcin} +\funcarg{krb5_keyblock *}{from} +\funcout \funcarg{krb5_keyblock *}{to} \end{funcdecl} Copy a keyblock from \funcparam{from} to \funcparam{to}, including -allocated storage. +allocated storage. The allocated storage in \funcparam{to} should be +freed by using {\bf free}(\funcparam{to->contents}). \begin{funcdecl}{krb5_copy_creds}{krb5_error_code}{\funcin} \funcarg{krb5_creds *}{incred} @@ -759,3 +995,16 @@ Extract the relevant parts of \funcparam{auth} and fill them into the structure pointed to by \funcparam{rep}. \funcparam{rep{\ptsto}client} and \funcparam{rep{\ptsto}server} are set to allocated storage and should be freed when \funcparam{*rep} is no longer needed. + +\begin{funcdecl}{krb5_get_server_rcache}{krb5_error_code}{\funcin} +\funcarg{const char *}{piece} +\funcout +\funcarg{krb5_rcache *}{ret_rcache} +\end{funcdecl} +Generate a replay cache name, allocate space for its handle, and open +it. \funcarg{piece} is used to distinguish this replay cache from +others currently in use on the system. +Upon successful return, \funcarg{ret_rcache} is filled in to contain a +handle to an open rcache, which should be closed with +\funcname{krb5_rc_close} and then freed with \funcname{xfree} when the +caller is finished using it. diff --git a/doc/api/libos.tex b/doc/api/libos.tex index 1ab0afbd5..bdd873339 100644 --- a/doc/api/libos.tex +++ b/doc/api/libos.tex @@ -211,18 +211,18 @@ The translation will be null terminated in all non-error returns. Returns system errors. -\begin{funcdecl}{krb5_get_default_realm}{krb5_error_code}{\funcin} -\funcarg{int}{lnsize} +\begin{funcdecl}{krb5_get_default_realm}{krb5_error_code} \funcout -\funcarg{char *}{lrealm} +\funcarg{char **}{lrealm} \end{funcdecl} Retrieves the default realm to be used if no user-specified realm is available (e.g. to interpret a user-typed principal name with the -realm omitted for convenience). +realm omitted for convenience), filling in \funcparam{lrealm} with a +pointer to the default realm in allocated storage. -\funcparam{lnsize} specifies the maximum length name that is to be filled into -\funcparam{lrealm}. +It is the caller's responsibility for freeing the allocated storage +pointed to be \funcparam{lream} when it is finished with it. Returns system errors. @@ -272,3 +272,54 @@ Returns TRUE if authorized, FALSE if not authorized. Given a length and a pointer, fills in the area pointed to by \funcparam{fillin} with \funcparam{size} random octets suitable for use in a confounder. + +\begin{funcdecl}{krb5_gen_portaddr}{krb5_error_code}{\funcin} +\funcarg{const krb5_address *}{adr} +\funcarg{krb5_const_pointer}{ptr} +\funcout +\funcarg{krb5_address **}{outaddr} +\end{funcdecl} + +Given an address \funcparam{adr} and an additional address-type specific +portion pointed to by +\funcparam{port} this routine +combines them into a freshly-allocated +\datatype{krb5_address} with type \datatype{ADDRTYPE_ADDRPORT} and fills in +\funcparam{*outaddr} to point to this address. For IP addresses, +\funcparam{ptr} should point to a network-byte-order TCP or UDP port +number. Upon success, \funcparam{*outaddr} will point to an allocated +address which should be freed with \funcname{krb5_free_address}. + +\begin{funcdecl}{krb5_gen_replay_name}{krb5_error_code}{\funcin} +\funcarg{const krb5_address *}{inaddr} +\funcarg{const char *}{uniq} +\funcout +\funcarg{char **}{string} +\end{funcdecl} + +Given a \datatype{krb5_address} with type \datatype{ADDRTYPE_ADDRPORT} +in \funcparam{inaddr}, this function unpacks its component address and +additional type, and uses them along with \funcparam{uniq} to allocate a +fresh string to represent the address and additional information. The +string is suitable for use as a replay cache tag. This string is +allocated and should be freed with \funcname{free} when the caller has +finished using it. When using IP addresses, the components in +\funcparam{inaddr\ptsto contents} must be of type +\datatype{ADDRTYPE_INET} and \datatype{ADDRTYPE_PORT}. + +\begin{funcdecl}{krb5_sname_to_principal}{krb5_error_code}{\funcin} +\funcarg{const char *}{hostname} +\funcarg{const char *}{sname} +\funcout +\funcarg{krb5_principal *}{ret_princ} +\end{funcdecl} + +Given a hostname \funcparam{hostname} and a generic service name +\funcparam{sname}, this function generates a full principal name to be +used when authenticating with the named service on the host. +\funcparam{hostname} is placed into canonical form before being composed +into the returned principal \funcparam{ret_princ}. The realm of the +principal is determined internally by calling \funcname{krb5_get_host_realm}. + +The caller should release \funcparam{ret_princ}'s storage by calling +\funcname{krb5_free_principal} when it is finished with the principal. diff --git a/doc/implement/libos-i.tex b/doc/implement/libos-i.tex index 1ab0afbd5..bdd873339 100644 --- a/doc/implement/libos-i.tex +++ b/doc/implement/libos-i.tex @@ -211,18 +211,18 @@ The translation will be null terminated in all non-error returns. Returns system errors. -\begin{funcdecl}{krb5_get_default_realm}{krb5_error_code}{\funcin} -\funcarg{int}{lnsize} +\begin{funcdecl}{krb5_get_default_realm}{krb5_error_code} \funcout -\funcarg{char *}{lrealm} +\funcarg{char **}{lrealm} \end{funcdecl} Retrieves the default realm to be used if no user-specified realm is available (e.g. to interpret a user-typed principal name with the -realm omitted for convenience). +realm omitted for convenience), filling in \funcparam{lrealm} with a +pointer to the default realm in allocated storage. -\funcparam{lnsize} specifies the maximum length name that is to be filled into -\funcparam{lrealm}. +It is the caller's responsibility for freeing the allocated storage +pointed to be \funcparam{lream} when it is finished with it. Returns system errors. @@ -272,3 +272,54 @@ Returns TRUE if authorized, FALSE if not authorized. Given a length and a pointer, fills in the area pointed to by \funcparam{fillin} with \funcparam{size} random octets suitable for use in a confounder. + +\begin{funcdecl}{krb5_gen_portaddr}{krb5_error_code}{\funcin} +\funcarg{const krb5_address *}{adr} +\funcarg{krb5_const_pointer}{ptr} +\funcout +\funcarg{krb5_address **}{outaddr} +\end{funcdecl} + +Given an address \funcparam{adr} and an additional address-type specific +portion pointed to by +\funcparam{port} this routine +combines them into a freshly-allocated +\datatype{krb5_address} with type \datatype{ADDRTYPE_ADDRPORT} and fills in +\funcparam{*outaddr} to point to this address. For IP addresses, +\funcparam{ptr} should point to a network-byte-order TCP or UDP port +number. Upon success, \funcparam{*outaddr} will point to an allocated +address which should be freed with \funcname{krb5_free_address}. + +\begin{funcdecl}{krb5_gen_replay_name}{krb5_error_code}{\funcin} +\funcarg{const krb5_address *}{inaddr} +\funcarg{const char *}{uniq} +\funcout +\funcarg{char **}{string} +\end{funcdecl} + +Given a \datatype{krb5_address} with type \datatype{ADDRTYPE_ADDRPORT} +in \funcparam{inaddr}, this function unpacks its component address and +additional type, and uses them along with \funcparam{uniq} to allocate a +fresh string to represent the address and additional information. The +string is suitable for use as a replay cache tag. This string is +allocated and should be freed with \funcname{free} when the caller has +finished using it. When using IP addresses, the components in +\funcparam{inaddr\ptsto contents} must be of type +\datatype{ADDRTYPE_INET} and \datatype{ADDRTYPE_PORT}. + +\begin{funcdecl}{krb5_sname_to_principal}{krb5_error_code}{\funcin} +\funcarg{const char *}{hostname} +\funcarg{const char *}{sname} +\funcout +\funcarg{krb5_principal *}{ret_princ} +\end{funcdecl} + +Given a hostname \funcparam{hostname} and a generic service name +\funcparam{sname}, this function generates a full principal name to be +used when authenticating with the named service on the host. +\funcparam{hostname} is placed into canonical form before being composed +into the returned principal \funcparam{ret_princ}. The realm of the +principal is determined internally by calling \funcname{krb5_get_host_realm}. + +The caller should release \funcparam{ret_princ}'s storage by calling +\funcname{krb5_free_principal} when it is finished with the principal. -- 2.26.2