From 3b39be09a0b4a0f54ffde7b26916c0bf2ff05856 Mon Sep 17 00:00:00 2001 From: devicerandom Date: Fri, 30 May 2008 10:42:56 +0000 Subject: [PATCH] Ugly fix for contact point freeze; some copyright notices updated. --- fit.py | 5 +++ generalclamp.py | 106 ++++++++++++++++++++++++----------------------- generalvclamp.py | 2 + hemingclamp.py | 44 ++++++++++---------- hooke.conf | 6 +-- 5 files changed, 86 insertions(+), 77 deletions(-) diff --git a/fit.py b/fit.py index b8f4717..f70636f 100755 --- a/fit.py +++ b/fit.py @@ -305,6 +305,7 @@ class fitCommands: endlength=int(len(xret)/2) ok=False + while not ok: xchunk=yext[endlength:monlength] ychunk=yext[endlength:monlength] @@ -316,6 +317,7 @@ class fitCommands: else: ok=True + ymean=scipy.mean(ychunk) #baseline index=0 @@ -329,6 +331,8 @@ class fitCommands: except IndexError: #The algorithm didn't find anything below the baseline! It should NEVER happen index=0 + return index + return index @@ -366,6 +370,7 @@ class fitCommands: xchunk=xext[endlength:monlength] ychunk=yext[endlength:monlength] regr=scipy.polyfit(xchunk,ychunk,1)[0:2] + ''' while not ok: xchunk=yext[endlength:monlength] diff --git a/generalclamp.py b/generalclamp.py index 477454e..508d9a3 100644 --- a/generalclamp.py +++ b/generalclamp.py @@ -3,69 +3,71 @@ ''' GENERALCLAMP.py +(c) 2008 Marco Brucale, Massimo Sandal + Plugin regarding general force clamp measurements ''' from libhooke import WX_GOOD, ClickedPoint -import wxversion +import wxversion import libhookecurve as lhc wxversion.select(WX_GOOD) -from wx import PostEvent +from wx import PostEvent + +class generalclampCommands: -class generalclampCommands: - def plotmanip_clamp(self, plot, current, customvalue=False): ''' - Handles some viewing options for the "force clamp" data format, depending on the state of these configuration variables: - (1) If self.config['fc_showphase'] != 0, the 'phase' data column (i.e. the 2nd) is shown in the 0th graph (else it isn't) - (2) If self.config['fc_showimposed'] != 0, the 'imposed deflection' data column (i.e. the 5th) is shown in the 1st graph (else it isn't) + Handles some viewing options for the "force clamp" data format, depending on the state of these configuration variables: + (1) If self.config['fc_showphase'] != 0, the 'phase' data column (i.e. the 2nd) is shown in the 0th graph (else it isn't) + (2) If self.config['fc_showimposed'] != 0, the 'imposed deflection' data column (i.e. the 5th) is shown in the 1st graph (else it isn't) (3) If self.config['fc_interesting'] == 0, the entire curve is shown in the graphs; if it has a non-zero value N, only phase N is shown. - - NOTE - my implementation of point(3) feels quite awkward - someone smarter than me plz polish that! - + + NOTE - my implementation of point(3) feels quite awkward - someone smarter than me plz polish that! + ''' #not a fclamp curve... if current.curve.experiment != 'clamp': - return plot - - if self.config['fc_interesting'] != 0 and plot.destination==0: - lower = int((self.config['fc_interesting'])-1) - upper = int((self.config['fc_interesting'])+1) - trim = current.curve.trimindexes()[lower:upper] - newtime = [] - newzpiezo = [] - newphase = [] - for x in range(trim[0],trim[1]): - newtime.append(self.plots[0].vectors[0][0][x]) - newzpiezo.append(self.plots[0].vectors[0][1][x]) - newphase.append(self.plots[0].vectors[1][1][x]) - self.plots[0].vectors[0][0] = newtime - self.plots[0].vectors[0][1] = newzpiezo - self.plots[0].vectors[1][0] = newtime - self.plots[0].vectors[1][1] = newphase - - if self.config['fc_interesting'] != 0 and plot.destination==1: - lower = int((self.config['fc_interesting'])-1) - upper = int((self.config['fc_interesting'])+1) - trim = current.curve.trimindexes()[lower:upper] - newtime = [] - newdefl = [] - newimposed = [] - for x in range(trim[0],trim[1]): - newtime.append(self.plots[1].vectors[0][0][x]) - newdefl.append(self.plots[1].vectors[0][1][x]) - newimposed.append(self.plots[1].vectors[1][1][x]) - self.plots[1].vectors[0][0] = newtime - self.plots[1].vectors[0][1] = newdefl - self.plots[1].vectors[1][0] = newtime - self.plots[1].vectors[1][1] = newimposed - - if self.config['fc_showphase'] == 0 and plot.destination==0: - self.plots[0].remove_set(1) - - if self.config['fc_showimposed'] == 0 and plot.destination==1: - self.plots[1].remove_set(1) - + return plot + + if self.config['fc_interesting'] != 0 and plot.destination==0: + lower = int((self.config['fc_interesting'])-1) + upper = int((self.config['fc_interesting'])+1) + trim = current.curve.trimindexes()[lower:upper] + newtime = [] + newzpiezo = [] + newphase = [] + for x in range(trim[0],trim[1]): + newtime.append(self.plots[0].vectors[0][0][x]) + newzpiezo.append(self.plots[0].vectors[0][1][x]) + newphase.append(self.plots[0].vectors[1][1][x]) + self.plots[0].vectors[0][0] = newtime + self.plots[0].vectors[0][1] = newzpiezo + self.plots[0].vectors[1][0] = newtime + self.plots[0].vectors[1][1] = newphase + + if self.config['fc_interesting'] != 0 and plot.destination==1: + lower = int((self.config['fc_interesting'])-1) + upper = int((self.config['fc_interesting'])+1) + trim = current.curve.trimindexes()[lower:upper] + newtime = [] + newdefl = [] + newimposed = [] + for x in range(trim[0],trim[1]): + newtime.append(self.plots[1].vectors[0][0][x]) + newdefl.append(self.plots[1].vectors[0][1][x]) + newimposed.append(self.plots[1].vectors[1][1][x]) + self.plots[1].vectors[0][0] = newtime + self.plots[1].vectors[0][1] = newdefl + self.plots[1].vectors[1][0] = newtime + self.plots[1].vectors[1][1] = newimposed + + if self.config['fc_showphase'] == 0 and plot.destination==0: + self.plots[0].remove_set(1) + + if self.config['fc_showimposed'] == 0 and plot.destination==1: + self.plots[1].remove_set(1) + return plot def do_time(self,args): @@ -76,9 +78,9 @@ class generalclampCommands: ---- Syntax: time ''' - if self.current.curve.experiment == 'clamp': + if self.current.curve.experiment == 'clamp': print 'Click two points.' - time=self._delta(set=0)[0] + time=self._delta(set=0)[0] print str(time*1000)+' ms' else: print 'This command makes no sense for a non-force clamp experiment.' diff --git a/generalvclamp.py b/generalvclamp.py index 4a8cd66..d3adefd 100644 --- a/generalvclamp.py +++ b/generalvclamp.py @@ -146,11 +146,13 @@ class generalvclampCommands: max_cycles=self.config['flatten'] #Using > 1 usually doesn't help and can give artefacts. However, it could be useful too. contact_index=self.find_contact_point() + valn=[[] for item in range(max_exponent)] yrn=[0.0 for item in range(max_exponent)] errn=[0.0 for item in range(max_exponent)] for i in range(int(max_cycles)): + x_ext=plot.vectors[0][0][contact_index+delta_contact:] y_ext=plot.vectors[0][1][contact_index+delta_contact:] x_ret=plot.vectors[1][0][contact_index+delta_contact:] diff --git a/hemingclamp.py b/hemingclamp.py index 780c5cb..881a789 100755 --- a/hemingclamp.py +++ b/hemingclamp.py @@ -5,7 +5,7 @@ libhemingclamp.py Library for interpreting Hemingway force spectroscopy files. -Copyright (C) 2006 Massimo Sandal (University of Bologna, Italy) +Copyright (C) 2008 Massimo Sandal, Marco Brucale (University of Bologna, Italy) This program is released under the GNU General Public License version 2. ''' @@ -69,26 +69,26 @@ class hemingclampDriver(lhc.Driver): return False def _getdata_all(self): - time = [] + time = [] phase = [] zpiezo = [] - defl = [] - imposed = [] - trim_indexes = [] - trim_counter = 0.0 + defl = [] + imposed = [] + trim_indexes = [] + trim_counter = 0.0 for i in self.data: temp = string.split(i) #time.append(float(temp[0])*(1.0e-3)) # This is managed differently now, since each data point = 1ms: see below - phase.append(float(temp[1])*(1.0e-7)) # The nonsensical (e-7) multiplier is just there to make phase data nicely plottable along other data + phase.append(float(temp[1])*(1.0e-7)) # The nonsensical (e-7) multiplier is just there to make phase data nicely plottable along other data zpiezo.append(float(temp[2])*(1.0e-9)) - defl.append(float(temp[3])*(1.0e-9)) - imposed.append(float(temp[4])*(1.0e-9)) - + defl.append(float(temp[3])*(1.0e-9)) + imposed.append(float(temp[4])*(1.0e-9)) + for x in range (0,len(phase)): if phase[x] != trim_counter: trim_indexes.append(x) - trim_counter = phase[x] + trim_counter = phase[x] #we rebuild the time counter assuming 1 point = 1 millisecond c=0.0 @@ -100,21 +100,21 @@ class hemingclampDriver(lhc.Driver): def time(self): return DataChunk(self._getdata_all()[0]) - + def phase(self): - return DataChunk(self._getdata_all()[1]) + return DataChunk(self._getdata_all()[1]) def zpiezo(self): return DataChunk(self._getdata_all()[2]) def deflection(self): return DataChunk(self._getdata_all()[3]) - + def imposed(self): - return DataChunk(self._getdata_all()[4]) - - def trimindexes(self): - return DataChunk(self._getdata_all()[5]) + return DataChunk(self._getdata_all()[4]) + + def trimindexes(self): + return DataChunk(self._getdata_all()[5]) def close_all(self): ''' @@ -126,11 +126,11 @@ class hemingclampDriver(lhc.Driver): main_plot=lhc.PlotObject() defl_plot=lhc.PlotObject() - time=self.time() + time=self.time() phase=self.phase() zpiezo=self.zpiezo() - deflection=self.deflection() - imposed=self.imposed() + deflection=self.deflection() + imposed=self.imposed() main_plot.vectors=[[time,zpiezo],[time,phase]] main_plot.units=['seconds','meters'] @@ -139,7 +139,7 @@ class hemingclampDriver(lhc.Driver): defl_plot.vectors=[[time,deflection],[time,imposed]] defl_plot.units=['seconds','Newtons'] - defl_plot.destination=1 + defl_plot.destination=1 return [main_plot, defl_plot] \ No newline at end of file diff --git a/hooke.conf b/hooke.conf index b675646..11b3875 100755 --- a/hooke.conf +++ b/hooke.conf @@ -2,7 +2,7 @@ - + - + - +