From 265392d1454bc2d73c546a748e95ddd076bdfa06 Mon Sep 17 00:00:00 2001 From: Thomas Deutschmann Date: Tue, 14 Apr 2020 16:11:18 +0200 Subject: [PATCH] sys-fs/lvm2: change "need lvmetad lvmlockd" to "use lvmetad lvmlockd" Closes: https://bugs.gentoo.org/689292 Package-Manager: Portage-2.3.99, Repoman-2.3.22 Signed-off-by: Thomas Deutschmann --- sys-fs/lvm2/files/lvm.rc-2.02.187 | 163 ++++++++++++++++ sys-fs/lvm2/lvm2-2.02.187-r1.ebuild | 279 ++++++++++++++++++++++++++++ 2 files changed, 442 insertions(+) create mode 100644 sys-fs/lvm2/files/lvm.rc-2.02.187 create mode 100644 sys-fs/lvm2/lvm2-2.02.187-r1.ebuild diff --git a/sys-fs/lvm2/files/lvm.rc-2.02.187 b/sys-fs/lvm2/files/lvm.rc-2.02.187 new file mode 100644 index 000000000000..6b4e3df715fe --- /dev/null +++ b/sys-fs/lvm2/files/lvm.rc-2.02.187 @@ -0,0 +1,163 @@ +#!/sbin/openrc-run +# Copyright 1999-2020 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +_get_lvm_path() { + local lvm_path= + for lvm_path in /bin/lvm /sbin/lvm ; do + [ -x "${lvm_path}" ] && break + done + echo "${lvm_path}" +} + +_use_lvmetad() { + local lvm_path="$(_get_lvm_path)" + [ ! -x "${lvm_path}" ] && return 1 + ${lvm_path} dumpconfig global 2>/dev/null | grep -q 'use_lvmetad=1' +} + +_use_lvmlockd() { + local lvm_path="$(_get_lvm_path)" + [ ! -x "${lvm_path}" ] && return 1 + ${lvm_path} dumpconfig global 2>/dev/null | grep -q 'use_lvmlockd=1' +} + +depend() { + before checkfs fsck + after modules device-mapper + # We may use lvmetad based on the configuration. If we added lvmetad + # support while lvm2 is running then we aren't dependent on it. For the + # more common case, if its disabled in the config we aren't dependent + # on it. + config /etc/lvm/lvm.conf + local _use= + + if service_started ; then + _use=$(service_get_value use) + else + if _use_lvmetad ; then + _use="${_use} lvmetad" + fi + + if _use_lvmlockd ; then + _use="${_use} lvmlockd" + fi + fi + + # Make sure you review /etc/conf.d/lvm as well! + # Depending on your system, it might also introduce udev & mdraid + need sysfs + + if [ -n "${_use}" ] ; then + use ${_use} + fi +} + +config='global { locking_dir = "/run/lock/lvm" }' + +dm_in_proc() { + local retval=0 + for x in devices misc ; do + grep -qs 'device-mapper' /proc/${x} + retval=$((${retval} + $?)) + done + return ${retval} +} + +start() { + # LVM support for /usr, /home, /opt .... + # This should be done *before* checking local + # volumes, or they never get checked. + + # NOTE: Add needed modules for LVM or RAID, etc + # to /etc/modules.autoload if needed + lvm_path="$(_get_lvm_path)" + for lvm_path in /bin/lvm /sbin/lvm ; do + [ -x "${lvm_path}" ] && break + done + if [ ! -x "${lvm_path}" ] ; then + eerror "Cannot find lvm binary in /sbin or /bin!" + return 1 + fi + if [ -z "${CDBOOT}" ] ; then + if [ -e /proc/modules ] && ! dm_in_proc ; then + modprobe dm-mod 2>/dev/null + fi + + if [ -d /proc/lvm ] || dm_in_proc ; then + ebegin "Setting up the Logical Volume Manager" + #still echo stderr for debugging + lvm_commands="#!${lvm_path}\n" + # Extra PV find pass because some devices might not have been available until very recently + lvm_commands="${lvm_commands}pvscan --config '${config}'\n" + # Now make the nodes + lvm_commands="${lvm_commands}vgscan --config '${config}' --mknodes\n" + # And turn them on! + lvm_commands="${lvm_commands}vgchange --config '${config}' --sysinit -a ly\n" + + if _use_lvmlockd ; then + # Start lockd VGs as required + lvm_commands="${lvm_commands}vgchange --config '${config}' --lock-start --lock-opt auto\n" + fi + + # Order of this is important, have to work around dash and LVM readline + printf "%b\n" "${lvm_commands}" | $lvm_path /proc/self/fd/0 >/dev/null + eend $? "Failed to setup the LVM" + fi + fi +} + +start_post() { + # Save if we needed lvmetad + if _use_lvmetad ; then + service_set_value use lvmetad + fi +} + +stop() { + for lvm_path in /bin/lvm /sbin/lvm ; do + [ -x "${lvm_path}" ] && break + done + + if [ ! -x "${lvm_path}" ] ; then + eerror "Cannot find lvm binary in /sbin or /bin!" + return 1 + fi + + # Stop LVM2 + if [ -x /sbin/vgs ] \ + && [ -x /sbin/vgchange ] \ + && [ -x /sbin/lvchange ] \ + && [ -f /etc/lvmtab -o -d /etc/lvm ] \ + && [ -d /proc/lvm -o "$(grep device-mapper /proc/misc 2>/dev/null)" ] + then + einfo "Shutting down the Logical Volume Manager" + + VGS=$($lvm_path vgs --config "${config}" -o vg_name --noheadings --nosuffix --rows 2> /dev/null) + + if [ -n "${VGS}" ] ; then + local _ending="eend" + [ "${RC_RUNLEVEL}" = shutdown ] && _ending="ewend" + + ebegin " Shutting Down LVs & VGs" + #still echo stderr for debugging + lvm_commands="#!${lvm_path}\n" + # Extra PV find pass because some devices might not have been available until very recently + lvm_commands="${lvm_commands}lvchange --config '${config}' --sysinit -a ln ${VGS}\n" + # Now make the nodes + lvm_commands="${lvm_commands}vgchange --config '${config}' --sysinit -a ln ${VGS}\n" + # Order of this is important, have to work around dash and LVM readline + printf "%b\n" "${lvm_commands}" | ${lvm_path} /proc/self/fd/0 --config "${config}" >/dev/null + + rc=${?} + msg="Failed (possibly some LVs still needed for /usr or root)" + [ "${RC_RUNLEVEL}" = shutdown ] && msg="${msg} [rc=${rc}]" && rc=0 + ${_ending} ${rc} "${msg}" + fi + + einfo "Finished shutting down the Logical Volume Manager" + return 0 + fi +} + +# vim:ts=4 diff --git a/sys-fs/lvm2/lvm2-2.02.187-r1.ebuild b/sys-fs/lvm2/lvm2-2.02.187-r1.ebuild new file mode 100644 index 000000000000..12522e077cc4 --- /dev/null +++ b/sys-fs/lvm2/lvm2-2.02.187-r1.ebuild @@ -0,0 +1,279 @@ +# Copyright 1999-2020 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +EAPI=7 +inherit autotools linux-info multilib systemd toolchain-funcs udev flag-o-matic + +DESCRIPTION="User-land utilities for LVM2 (device-mapper) software" +HOMEPAGE="https://sourceware.org/lvm2/" +SRC_URI="ftp://sourceware.org/pub/lvm2/${PN/lvm/LVM}.${PV}.tgz + ftp://sourceware.org/pub/lvm2/old/${PN/lvm/LVM}.${PV}.tgz" + +LICENSE="GPL-2" +SLOT="0" +KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux" +IUSE="readline static static-libs systemd lvm2create_initrd sanlock selinux +udev +thin device-mapper-only" +REQUIRED_USE="device-mapper-only? ( !lvm2create_initrd !sanlock !thin ) + systemd? ( udev )" + +DEPEND_COMMON=" + dev-libs/libaio[static-libs?] + static? ( dev-libs/libaio[static-libs] ) + !static? ( dev-libs/libaio[static-libs?] ) + readline? ( sys-libs/readline:0= ) + sanlock? ( sys-cluster/sanlock ) + systemd? ( >=sys-apps/systemd-205:0= ) + udev? ( >=virtual/libudev-208:=[static-libs(-)?] )" +# /run is now required for locking during early boot. /var cannot be assumed to +# be available -- thus, pull in recent enough baselayout for /run. +# This version of LVM is incompatible with cryptsetup <1.1.2. +RDEPEND="${DEPEND_COMMON} + >=sys-apps/baselayout-2.2 + !=sys-apps/util-linux-2.16 + lvm2create_initrd? ( sys-apps/makedev ) + thin? ( >=sys-block/thin-provisioning-tools-0.3.0 )" +# note: thin- 0.3.0 is required to avoid --disable-thin_check_needs_check +# USE 'static' currently only works with eudev, bug 520450 +DEPEND="${DEPEND_COMMON} + >=sys-devel/binutils-2.20.1-r1 + static? ( + selinux? ( sys-libs/libselinux[static-libs] ) + udev? ( >=sys-fs/eudev-3.1.2[static-libs] ) + >=sys-apps/util-linux-2.16[static-libs] + )" +BDEPEND=" + sys-devel/autoconf-archive + virtual/pkgconfig +" + +S="${WORKDIR}/${PN/lvm/LVM}.${PV}" + +PATCHES=( + # Gentoo specific modification(s): + "${FILESDIR}"/${PN}-2.02.178-example.conf.in.patch + + # For upstream -- review and forward: + "${FILESDIR}"/${PN}-2.02.63-always-make-static-libdm.patch + "${FILESDIR}"/${PN}-2.02.56-lvm2create_initrd.patch + "${FILESDIR}"/${PN}-2.02.67-createinitrd.patch #301331 + "${FILESDIR}"/${PN}-2.02.99-locale-muck.patch #330373 + "${FILESDIR}"/${PN}-2.02.178-asneeded.patch # -Wl,--as-needed + "${FILESDIR}"/${PN}-2.02.178-dynamic-static-ldflags.patch #332905 + "${FILESDIR}"/${PN}-2.02.178-static-pkgconfig-libs.patch #370217, #439414 + blkid + "${FILESDIR}"/${PN}-2.02.176-pthread-pkgconfig.patch #492450 + "${FILESDIR}"/${PN}-2.02.171-static-libm.patch #617756 + "${FILESDIR}"/${PN}-2.02.166-HPPA-no-O_DIRECT.patch #657446 + #"${FILESDIR}"/${PN}-2.02.145-mkdev.patch #580062 # Merged upstream + "${FILESDIR}"/${PN}-2.02.184-dmeventd-no-idle-exit.patch + #"${FILESDIR}"/${PN}-2.02.184-allow-reading-metadata-with-invalid-creation_time.patch #682380 # merged upstream + "${FILESDIR}"/${PN}-2.02.184-mksh_build.patch #686652 + "${FILESDIR}"/${PN}-2.02.186-udev_remove_unsupported_option.patch #700160 +) + +pkg_setup() { + local CONFIG_CHECK="~SYSVIPC" + + if use udev; then + local WARNING_SYSVIPC="CONFIG_SYSVIPC:\tis not set (required for udev sync)\n" + if linux_config_exists; then + local uevent_helper_path=$(linux_chkconfig_string UEVENT_HELPER_PATH) + if [[ -n "${uevent_helper_path}" ]] && [[ "${uevent_helper_path}" != '""' ]]; then + ewarn "It's recommended to set an empty value to the following kernel config option:" + ewarn "CONFIG_UEVENT_HELPER_PATH=${uevent_helper_path}" + fi + fi + fi + + check_extra_config + + # 1. Genkernel no longer copies /sbin/lvm blindly. + if use static; then + elog "Warning, we no longer overwrite /sbin/lvm and /sbin/dmsetup with" + elog "their static versions. If you need the static binaries," + elog "you must append .static to the filename!" + fi +} + +src_prepare() { + default + + sed -i \ + -e "1iAR = $(tc-getAR)" \ + -e "s:CC ?= @CC@:CC = $(tc-getCC):" \ + make.tmpl.in || die #444082 + + sed -i -e '/FLAG/s:-O2::' configure{.ac,} || die #480212 + + if use udev && ! use device-mapper-only; then + sed -i -e '/use_lvmetad =/s:0:1:' conf/example.conf.in || die #514196 + elog "Notice that \"use_lvmetad\" setting is enabled with USE=\"udev\" in" + elog "/etc/lvm/lvm.conf, which will require restart of udev, lvm, and lvmetad" + elog "if it was previously disabled." + fi + + sed -i -e "s:/usr/bin/true:$(type -P true):" scripts/blk_availability_systemd_red_hat.service.in || die #517514 + + # Don't install thin man page when not requested + if ! use thin ; then + sed -i -e 's/^\(MAN7+=.*\) $(LVMTHINMAN) \(.*\)$/\1 \2/' man/Makefile.in || die + fi + + eautoreconf +} + +src_configure() { + filter-flags -flto + local myeconfargs=() + + # Most of this package does weird stuff. + # The build options are tristate, and --without is NOT supported + # options: 'none', 'internal', 'shared' + myeconfargs+=( + $(use_enable !device-mapper-only dmfilemapd) + $(use_enable !device-mapper-only dmeventd) + $(use_enable !device-mapper-only cmdlib) + $(use_enable !device-mapper-only applib) + $(use_enable !device-mapper-only fsadm) + $(use_enable !device-mapper-only lvmetad) + $(use_enable !device-mapper-only lvmpolld) + $(usex device-mapper-only --disable-udev-systemd-background-jobs '') + + # This only causes the .static versions to become available + $(usex static --enable-static_link '') + + # dmeventd requires mirrors to be internal, and snapshot available + # so we cannot disable them + --with-mirrors="$(usex device-mapper-only none internal)" + --with-snapshots="$(usex device-mapper-only none internal)" + + # disable O_DIRECT support on hppa, breaks pv detection (#99532) + $(usex hppa --disable-o_direct '') + ) + + if use thin; then + myeconfargs+=( --with-thin=internal --with-cache=internal ) + local texec + for texec in check dump repair restore; do + myeconfargs+=( --with-thin-${texec}="${EPREFIX}"/sbin/thin_${texec} ) + myeconfargs+=( --with-cache-${texec}="${EPREFIX}"/sbin/cache_${texec} ) + done + else + myeconfargs+=( --with-thin=none --with-cache=none ) + fi + + myeconfargs+=( --with-clvmd=none --with-cluster=none ) + + myeconfargs+=( + $(use_enable readline) + $(use_enable selinux) + --enable-pkgconfig + --with-confdir="${EPREFIX}"/etc + --exec-prefix="${EPREFIX}" + --sbindir="${EPREFIX}/sbin" + --with-staticdir="${EPREFIX}"/sbin + --libdir="${EPREFIX}/$(get_libdir)" + --with-usrlibdir="${EPREFIX}/usr/$(get_libdir)" + --with-default-dm-run-dir=/run + --with-default-run-dir=/run/lvm + --with-default-locking-dir=/run/lock/lvm + --with-default-pid-dir=/run + $(use_enable udev udev_rules) + $(use_enable udev udev_sync) + $(use_with udev udevdir "$(get_udevdir)"/rules.d) + $(use_enable sanlock lvmlockd-sanlock) + $(use_enable systemd udev-systemd-background-jobs) + $(use_enable systemd notify-dbus) + --with-systemdsystemunitdir="$(systemd_get_systemunitdir)" + CLDFLAGS="${LDFLAGS}" + ) + # Hard-wire this to bash as some shells (dash) don't know + # "-o pipefail" #682404 + CONFIG_SHELL="/bin/bash" \ + econf "${myeconfargs[@]}" +} + +src_compile() { + pushd include >/dev/null + emake V=1 + popd >/dev/null + + if use device-mapper-only ; then + emake V=1 device-mapper + else + emake V=1 + emake V=1 CC="$(tc-getCC)" -C scripts lvm2_activation_generator_systemd_red_hat + fi +} + +src_install() { + local inst INSTALL_TARGETS + INSTALL_TARGETS=( install install_tmpfiles_configuration ) + # install systemd related files only when requested, bug #522430 + use systemd && INSTALL_TARGETS+=( install_systemd_units install_systemd_generators ) + use device-mapper-only && INSTALL_TARGETS=( install_device-mapper ) + for inst in ${INSTALL_TARGETS[@]}; do + emake V=1 DESTDIR="${D}" ${inst} + done + + newinitd "${FILESDIR}"/device-mapper.rc-2.02.105-r2 device-mapper + newconfd "${FILESDIR}"/device-mapper.conf-1.02.22-r3 device-mapper + + if use !device-mapper-only ; then + newinitd "${FILESDIR}"/dmeventd.initd-2.02.184-r2 dmeventd + newinitd "${FILESDIR}"/lvm.rc-2.02.187 lvm + newconfd "${FILESDIR}"/lvm.confd-2.02.184-r3 lvm + if ! use udev ; then + # We keep the variable but remove udev from it. + sed -r -i \ + -e '/^rc_need=/s/\//g' \ + "${ED}/etc/conf.d/lvm" || die "Could not drop udev from rc_need" + fi + + newinitd "${FILESDIR}"/lvm-monitoring.initd-2.02.105-r2 lvm-monitoring + newinitd "${FILESDIR}"/lvmetad.initd-2.02.116-r3 lvmetad + newinitd "${FILESDIR}"/lvmpolld.initd-2.02.183 lvmpolld + fi + + if use sanlock; then + newinitd "${FILESDIR}"/lvmlockd.initd-2.02.166-r1 lvmlockd + fi + + if use static-libs; then + dolib.a libdm/ioctl/libdevmapper.a + if use !device-mapper-only; then + # depends on lvmetad + dolib.a libdaemon/client/libdaemonclient.a #462908 + # depends on dmeventd + dolib.a daemons/dmeventd/libdevmapper-event.a + fi + else + rm -f "${ED}"/usr/$(get_libdir)/{libdevmapper-event,liblvm2cmd,liblvm2app,libdevmapper}.a + fi + + if use lvm2create_initrd; then + dosbin scripts/lvm2create_initrd/lvm2create_initrd + doman scripts/lvm2create_initrd/lvm2create_initrd.8 + newdoc scripts/lvm2create_initrd/README README.lvm2create_initrd + fi + + insinto /etc + doins "${FILESDIR}"/dmtab + + dodoc README VERSION* WHATS_NEW WHATS_NEW_DM doc/*.{c,txt} conf/*.conf +} + +pkg_postinst() { + ewarn "Make sure the \"lvm\" init script is in the runlevels:" + ewarn "# rc-update add lvm boot" + ewarn + ewarn "Make sure to enable lvmetad in /etc/lvm/lvm.conf if you want" + ewarn "to enable lvm autoactivation and metadata caching." +} + +src_test() { + einfo "Tests are disabled because of device-node mucking, if you want to" + einfo "run tests, compile the package and see ${S}/tests" +} -- 2.26.2