From 22af3d4bdf3aa268a060a638a5fa301ba2da10ab Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Sat, 30 Nov 2013 17:42:51 +0200 Subject: [PATCH] [PATCH 1/2] devel: add doxygen configuration file --- cd/3657acdbebd1fac623eb7927fedf5677d3b07c | 1977 +++++++++++++++++++++ 1 file changed, 1977 insertions(+) create mode 100644 cd/3657acdbebd1fac623eb7927fedf5677d3b07c diff --git a/cd/3657acdbebd1fac623eb7927fedf5677d3b07c b/cd/3657acdbebd1fac623eb7927fedf5677d3b07c new file mode 100644 index 000000000..489360f65 --- /dev/null +++ b/cd/3657acdbebd1fac623eb7927fedf5677d3b07c @@ -0,0 +1,1977 @@ +Return-Path: +X-Original-To: notmuch@notmuchmail.org +Delivered-To: notmuch@notmuchmail.org +Received: from localhost (localhost [127.0.0.1]) + by olra.theworths.org (Postfix) with ESMTP id 1E6E5431FD7 + for ; Sat, 30 Nov 2013 07:43:21 -0800 (PST) +X-Virus-Scanned: Debian amavisd-new at olra.theworths.org +X-Amavis-Alert: BAD HEADER SECTION, Duplicate header field: "References" +X-Spam-Flag: NO +X-Spam-Score: -0.7 +X-Spam-Level: +X-Spam-Status: No, score=-0.7 tagged_above=-999 required=5 + tests=[RCVD_IN_DNSWL_LOW=-0.7] autolearn=disabled +Received: from olra.theworths.org ([127.0.0.1]) + by localhost (olra.theworths.org [127.0.0.1]) (amavisd-new, port 10024) + with ESMTP id EYVHm18aQ2+V for ; + Sat, 30 Nov 2013 07:43:03 -0800 (PST) +Received: from mail-lb0-f169.google.com (mail-lb0-f169.google.com + [209.85.217.169]) (using TLSv1 with cipher RC4-SHA (128/128 bits)) + (No client certificate requested) + by olra.theworths.org (Postfix) with ESMTPS id ABF57431FC7 + for ; Sat, 30 Nov 2013 07:43:02 -0800 (PST) +Received: by mail-lb0-f169.google.com with SMTP id y6so7845796lbh.28 + for ; Sat, 30 Nov 2013 07:43:01 -0800 (PST) +X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; + d=1e100.net; s=20130820; + h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to + :references:in-reply-to:references; + bh=Iz1uUZ+neibWGr5GIuofiNfVO/0yuJKrB5JYu2X8DxA=; + b=NNkzskWT4nr9GVAu4ucmTODpa543YLSyfTzzWkW57S9jTrkSuBnTckTaT2lKs6c44q + hfUqgLvL5m/ah7PenDAOhLQTRcmmEG5beI4kq82MXg2M3AE7c/Y8yxkj3ZpLnBfSTt9v + 7PHk4wC9N1soNd+wxPAyZ7I8d/it73pilzEPo2g8SzJPLHhV4uTou/Zys5sJXnOEV/5A + UkX5pSpXFgtanWp5ihbCXoqdWp7hcaecqX7sBHLIG3CsSGrsR2ndu9KNCeajMiAhYzbg + ilpi+ExAh17QB+ExIjw8PkE6paZlWrWVcwo/d5+GoqDVcsftHnkvSpupRR2INv+wQ6AF + +2ag== +X-Gm-Message-State: + ALoCoQmet+vHF4OV6cbwkSxwn6xBKvsG9PrdPd0uQG+2R1uWa4lSoZknS0aTZKsJnYmCgNr4h3Ov +X-Received: by 10.112.151.103 with SMTP id up7mr8150440lbb.14.1385826181006; + Sat, 30 Nov 2013 07:43:01 -0800 (PST) +Received: from localhost (dsl-hkibrasgw2-58c36f-91.dhcp.inet.fi. + [88.195.111.91]) + by mx.google.com with ESMTPSA id iy7sm38415869lbc.4.2013.11.30.07.42.58 + for + (version=TLSv1.2 cipher=RC4-SHA bits=128/128); + Sat, 30 Nov 2013 07:42:59 -0800 (PST) +From: Jani Nikula +To: notmuch@notmuchmail.org +Subject: [PATCH 1/2] devel: add doxygen configuration file +Date: Sat, 30 Nov 2013 17:42:51 +0200 +Message-Id: + <4000d64d9fa9e0954ace15dcdf97f1a39b6b6145.1385826040.git.jani@nikula.org> +X-Mailer: git-send-email 1.8.4.2 +In-Reply-To: +References: +In-Reply-To: +References: +X-BeenThere: notmuch@notmuchmail.org +X-Mailman-Version: 2.1.13 +Precedence: list +List-Id: "Use and development of the notmuch mail system." + +List-Unsubscribe: , + +List-Archive: +List-Post: +List-Help: +List-Subscribe: , + +X-List-Received-Date: Sat, 30 Nov 2013 15:43:21 -0000 + +To generate library man page from lib/notmuch.h using + +$ doxygen devel/doxygen.cfg +--- + devel/doxygen.cfg | 1890 +++++++++++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 1890 insertions(+) + create mode 100644 devel/doxygen.cfg + +diff --git a/devel/doxygen.cfg b/devel/doxygen.cfg +new file mode 100644 +index 0000000..e44305b +--- /dev/null ++++ b/devel/doxygen.cfg +@@ -0,0 +1,1890 @@ ++# Doxyfile 1.8.4 ++ ++# This file describes the settings to be used by the documentation system ++# doxygen (www.doxygen.org) for a project. ++# ++# All text after a double hash (##) is considered a comment and is placed ++# in front of the TAG it is preceding . ++# All text after a hash (#) is considered a comment and will be ignored. ++# The format is: ++# TAG = value [value, ...] ++# For lists items can also be appended using: ++# TAG += value [value, ...] ++# Values that contain spaces should be placed between quotes (" "). ++ ++#--------------------------------------------------------------------------- ++# Project related configuration options ++#--------------------------------------------------------------------------- ++ ++# This tag specifies the encoding used for all characters in the config file ++# that follow. The default is UTF-8 which is also the encoding used for all ++# text before the first occurrence of this tag. Doxygen uses libiconv (or the ++# iconv built into libc) for the transcoding. See ++# http://www.gnu.org/software/libiconv for the list of possible encodings. ++ ++DOXYFILE_ENCODING = UTF-8 ++ ++# The PROJECT_NAME tag is a single word (or sequence of words) that should ++# identify the project. Note that if you do not use Doxywizard you need ++# to put quotes around the project name if it contains spaces. ++ ++PROJECT_NAME = "Notmuch 0.17" ++ ++# The PROJECT_NUMBER tag can be used to enter a project or revision number. ++# This could be handy for archiving the generated documentation or ++# if some version control system is used. ++ ++PROJECT_NUMBER = ++ ++# Using the PROJECT_BRIEF tag one can provide an optional one line description ++# for a project that appears at the top of each page and should give viewer ++# a quick idea about the purpose of the project. Keep the description short. ++ ++PROJECT_BRIEF = ++ ++# With the PROJECT_LOGO tag one can specify an logo or icon that is ++# included in the documentation. The maximum height of the logo should not ++# exceed 55 pixels and the maximum width should not exceed 200 pixels. ++# Doxygen will copy the logo to the output directory. ++ ++PROJECT_LOGO = ++ ++# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) ++# base path where the generated documentation will be put. ++# If a relative path is entered, it will be relative to the location ++# where doxygen was started. If left blank the current directory will be used. ++ ++OUTPUT_DIRECTORY = ++ ++# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create ++# 4096 sub-directories (in 2 levels) under the output directory of each output ++# format and will distribute the generated files over these directories. ++# Enabling this option can be useful when feeding doxygen a huge amount of ++# source files, where putting all generated files in the same directory would ++# otherwise cause performance problems for the file system. ++ ++CREATE_SUBDIRS = NO ++ ++# The OUTPUT_LANGUAGE tag is used to specify the language in which all ++# documentation generated by doxygen is written. Doxygen will use this ++# information to generate all constant output in the proper language. ++# The default language is English, other supported languages are: ++# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, ++# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, ++# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English ++# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, ++# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, ++# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. ++ ++OUTPUT_LANGUAGE = English ++ ++# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will ++# include brief member descriptions after the members that are listed in ++# the file and class documentation (similar to JavaDoc). ++# Set to NO to disable this. ++ ++BRIEF_MEMBER_DESC = YES ++ ++# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend ++# the brief description of a member or function before the detailed description. ++# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the ++# brief descriptions will be completely suppressed. ++ ++REPEAT_BRIEF = YES ++ ++# This tag implements a quasi-intelligent brief description abbreviator ++# that is used to form the text in various listings. Each string ++# in this list, if found as the leading text of the brief description, will be ++# stripped from the text and the result after processing the whole list, is ++# used as the annotated text. Otherwise, the brief description is used as-is. ++# If left blank, the following values are used ("$name" is automatically ++# replaced with the name of the entity): "The $name class" "The $name widget" ++# "The $name file" "is" "provides" "specifies" "contains" ++# "represents" "a" "an" "the" ++ ++ABBREVIATE_BRIEF = ++ ++# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then ++# Doxygen will generate a detailed section even if there is only a brief ++# description. ++ ++ALWAYS_DETAILED_SEC = NO ++ ++# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all ++# inherited members of a class in the documentation of that class as if those ++# members were ordinary class members. Constructors, destructors and assignment ++# operators of the base classes will not be shown. ++ ++INLINE_INHERITED_MEMB = NO ++ ++# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full ++# path before files name in the file list and in the header files. If set ++# to NO the shortest path that makes the file name unique will be used. ++ ++FULL_PATH_NAMES = NO ++ ++# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag ++# can be used to strip a user-defined part of the path. Stripping is ++# only done if one of the specified strings matches the left-hand part of ++# the path. The tag can be used to show relative paths in the file list. ++# If left blank the directory from which doxygen is run is used as the ++# path to strip. Note that you specify absolute paths here, but also ++# relative paths, which will be relative from the directory where doxygen is ++# started. ++ ++STRIP_FROM_PATH = ++ ++# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of ++# the path mentioned in the documentation of a class, which tells ++# the reader which header file to include in order to use a class. ++# If left blank only the name of the header file containing the class ++# definition is used. Otherwise one should specify the include paths that ++# are normally passed to the compiler using the -I flag. ++ ++STRIP_FROM_INC_PATH = ++ ++# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter ++# (but less readable) file names. This can be useful if your file system ++# doesn't support long names like on DOS, Mac, or CD-ROM. ++ ++SHORT_NAMES = NO ++ ++# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen ++# will interpret the first line (until the first dot) of a JavaDoc-style ++# comment as the brief description. If set to NO, the JavaDoc ++# comments will behave just like regular Qt-style comments ++# (thus requiring an explicit @brief command for a brief description.) ++ ++JAVADOC_AUTOBRIEF = YES ++ ++# If the QT_AUTOBRIEF tag is set to YES then Doxygen will ++# interpret the first line (until the first dot) of a Qt-style ++# comment as the brief description. If set to NO, the comments ++# will behave just like regular Qt-style comments (thus requiring ++# an explicit \brief command for a brief description.) ++ ++QT_AUTOBRIEF = NO ++ ++# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen ++# treat a multi-line C++ special comment block (i.e. a block of //! or /// ++# comments) as a brief description. This used to be the default behaviour. ++# The new default is to treat a multi-line C++ comment block as a detailed ++# description. Set this tag to YES if you prefer the old behaviour instead. ++ ++MULTILINE_CPP_IS_BRIEF = NO ++ ++# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented ++# member inherits the documentation from any documented member that it ++# re-implements. ++ ++INHERIT_DOCS = YES ++ ++# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce ++# a new page for each member. If set to NO, the documentation of a member will ++# be part of the file/class/namespace that contains it. ++ ++SEPARATE_MEMBER_PAGES = NO ++ ++# The TAB_SIZE tag can be used to set the number of spaces in a tab. ++# Doxygen uses this value to replace tabs by spaces in code fragments. ++ ++TAB_SIZE = 8 ++ ++# This tag can be used to specify a number of aliases that acts ++# as commands in the documentation. An alias has the form "name=value". ++# For example adding "sideeffect=\par Side Effects:\n" will allow you to ++# put the command \sideeffect (or @sideeffect) in the documentation, which ++# will result in a user-defined paragraph with heading "Side Effects:". ++# You can put \n's in the value part of an alias to insert newlines. ++ ++ALIASES = ++ ++# This tag can be used to specify a number of word-keyword mappings (TCL only). ++# A mapping has the form "name=value". For example adding ++# "class=itcl::class" will allow you to use the command class in the ++# itcl::class meaning. ++ ++TCL_SUBST = ++ ++# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C ++# sources only. Doxygen will then generate output that is more tailored for C. ++# For instance, some of the names that are used will be different. The list ++# of all members will be omitted, etc. ++ ++OPTIMIZE_OUTPUT_FOR_C = YES ++ ++# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java ++# sources only. Doxygen will then generate output that is more tailored for ++# Java. For instance, namespaces will be presented as packages, qualified ++# scopes will look different, etc. ++ ++OPTIMIZE_OUTPUT_JAVA = NO ++ ++# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran ++# sources only. Doxygen will then generate output that is more tailored for ++# Fortran. ++ ++OPTIMIZE_FOR_FORTRAN = NO ++ ++# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL ++# sources. Doxygen will then generate output that is tailored for ++# VHDL. ++ ++OPTIMIZE_OUTPUT_VHDL = NO ++ ++# Doxygen selects the parser to use depending on the extension of the files it ++# parses. With this tag you can assign which parser to use for a given ++# extension. Doxygen has a built-in mapping, but you can override or extend it ++# using this tag. The format is ext=language, where ext is a file extension, ++# and language is one of the parsers supported by doxygen: IDL, Java, ++# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, ++# C++. For instance to make doxygen treat .inc files as Fortran files (default ++# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note ++# that for custom extensions you also need to set FILE_PATTERNS otherwise the ++# files are not read by doxygen. ++ ++EXTENSION_MAPPING = ++ ++# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all ++# comments according to the Markdown format, which allows for more readable ++# documentation. See http://daringfireball.net/projects/markdown/ for details. ++# The output of markdown processing is further processed by doxygen, so you ++# can mix doxygen, HTML, and XML commands with Markdown formatting. ++# Disable only in case of backward compatibilities issues. ++ ++MARKDOWN_SUPPORT = YES ++ ++# When enabled doxygen tries to link words that correspond to documented ++# classes, or namespaces to their corresponding documentation. Such a link can ++# be prevented in individual cases by by putting a % sign in front of the word ++# or globally by setting AUTOLINK_SUPPORT to NO. ++ ++AUTOLINK_SUPPORT = YES ++ ++# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want ++# to include (a tag file for) the STL sources as input, then you should ++# set this tag to YES in order to let doxygen match functions declarations and ++# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. ++# func(std::string) {}). This also makes the inheritance and collaboration ++# diagrams that involve STL classes more complete and accurate. ++ ++BUILTIN_STL_SUPPORT = NO ++ ++# If you use Microsoft's C++/CLI language, you should set this option to YES to ++# enable parsing support. ++ ++CPP_CLI_SUPPORT = NO ++ ++# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. ++# Doxygen will parse them like normal C++ but will assume all classes use public ++# instead of private inheritance when no explicit protection keyword is present. ++ ++SIP_SUPPORT = NO ++ ++# For Microsoft's IDL there are propget and propput attributes to indicate ++# getter and setter methods for a property. Setting this option to YES (the ++# default) will make doxygen replace the get and set methods by a property in ++# the documentation. This will only work if the methods are indeed getting or ++# setting a simple type. If this is not the case, or you want to show the ++# methods anyway, you should set this option to NO. ++ ++IDL_PROPERTY_SUPPORT = YES ++ ++# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC ++# tag is set to YES, then doxygen will reuse the documentation of the first ++# member in the group (if any) for the other members of the group. By default ++# all members of a group must be documented explicitly. ++ ++DISTRIBUTE_GROUP_DOC = NO ++ ++# Set the SUBGROUPING tag to YES (the default) to allow class member groups of ++# the same type (for instance a group of public functions) to be put as a ++# subgroup of that type (e.g. under the Public Functions section). Set it to ++# NO to prevent subgrouping. Alternatively, this can be done per class using ++# the \nosubgrouping command. ++ ++SUBGROUPING = YES ++ ++# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and ++# unions are shown inside the group in which they are included (e.g. using ++# @ingroup) instead of on a separate page (for HTML and Man pages) or ++# section (for LaTeX and RTF). ++ ++INLINE_GROUPED_CLASSES = NO ++ ++# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and ++# unions with only public data fields or simple typedef fields will be shown ++# inline in the documentation of the scope in which they are defined (i.e. file, ++# namespace, or group documentation), provided this scope is documented. If set ++# to NO (the default), structs, classes, and unions are shown on a separate ++# page (for HTML and Man pages) or section (for LaTeX and RTF). ++ ++INLINE_SIMPLE_STRUCTS = NO ++ ++# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum ++# is documented as struct, union, or enum with the name of the typedef. So ++# typedef struct TypeS {} TypeT, will appear in the documentation as a struct ++# with name TypeT. When disabled the typedef will appear as a member of a file, ++# namespace, or class. And the struct will be named TypeS. This can typically ++# be useful for C code in case the coding convention dictates that all compound ++# types are typedef'ed and only the typedef is referenced, never the tag name. ++ ++TYPEDEF_HIDES_STRUCT = YES ++ ++# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This ++# cache is used to resolve symbols given their name and scope. Since this can ++# be an expensive process and often the same symbol appear multiple times in ++# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too ++# small doxygen will become slower. If the cache is too large, memory is wasted. ++# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid ++# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 ++# symbols. ++ ++LOOKUP_CACHE_SIZE = 0 ++ ++#--------------------------------------------------------------------------- ++# Build related configuration options ++#--------------------------------------------------------------------------- ++ ++# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in ++# documentation are documented, even if no documentation was available. ++# Private class members and static file members will be hidden unless ++# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES ++ ++EXTRACT_ALL = NO ++ ++# If the EXTRACT_PRIVATE tag is set to YES all private members of a class ++# will be included in the documentation. ++ ++EXTRACT_PRIVATE = NO ++ ++# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal ++# scope will be included in the documentation. ++ ++EXTRACT_PACKAGE = NO ++ ++# If the EXTRACT_STATIC tag is set to YES all static members of a file ++# will be included in the documentation. ++ ++EXTRACT_STATIC = NO ++ ++# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) ++# defined locally in source files will be included in the documentation. ++# If set to NO only classes defined in header files are included. ++ ++EXTRACT_LOCAL_CLASSES = YES ++ ++# This flag is only useful for Objective-C code. When set to YES local ++# methods, which are defined in the implementation section but not in ++# the interface are included in the documentation. ++# If set to NO (the default) only methods in the interface are included. ++ ++EXTRACT_LOCAL_METHODS = NO ++ ++# If this flag is set to YES, the members of anonymous namespaces will be ++# extracted and appear in the documentation as a namespace called ++# 'anonymous_namespace{file}', where file will be replaced with the base ++# name of the file that contains the anonymous namespace. By default ++# anonymous namespaces are hidden. ++ ++EXTRACT_ANON_NSPACES = NO ++ ++# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all ++# undocumented members of documented classes, files or namespaces. ++# If set to NO (the default) these members will be included in the ++# various overviews, but no documentation section is generated. ++# This option has no effect if EXTRACT_ALL is enabled. ++ ++HIDE_UNDOC_MEMBERS = NO ++ ++# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all ++# undocumented classes that are normally visible in the class hierarchy. ++# If set to NO (the default) these classes will be included in the various ++# overviews. This option has no effect if EXTRACT_ALL is enabled. ++ ++HIDE_UNDOC_CLASSES = NO ++ ++# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all ++# friend (class|struct|union) declarations. ++# If set to NO (the default) these declarations will be included in the ++# documentation. ++ ++HIDE_FRIEND_COMPOUNDS = NO ++ ++# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any ++# documentation blocks found inside the body of a function. ++# If set to NO (the default) these blocks will be appended to the ++# function's detailed documentation block. ++ ++HIDE_IN_BODY_DOCS = NO ++ ++# The INTERNAL_DOCS tag determines if documentation ++# that is typed after a \internal command is included. If the tag is set ++# to NO (the default) then the documentation will be excluded. ++# Set it to YES to include the internal documentation. ++ ++INTERNAL_DOCS = NO ++ ++# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate ++# file names in lower-case letters. If set to YES upper-case letters are also ++# allowed. This is useful if you have classes or files whose names only differ ++# in case and if your file system supports case sensitive file names. Windows ++# and Mac users are advised to set this option to NO. ++ ++CASE_SENSE_NAMES = YES ++ ++# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen ++# will show members with their full class and namespace scopes in the ++# documentation. If set to YES the scope will be hidden. ++ ++HIDE_SCOPE_NAMES = NO ++ ++# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen ++# will put a list of the files that are included by a file in the documentation ++# of that file. ++ ++SHOW_INCLUDE_FILES = NO ++ ++# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen ++# will list include files with double quotes in the documentation ++# rather than with sharp brackets. ++ ++FORCE_LOCAL_INCLUDES = NO ++ ++# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] ++# is inserted in the documentation for inline members. ++ ++INLINE_INFO = YES ++ ++# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen ++# will sort the (detailed) documentation of file and class members ++# alphabetically by member name. If set to NO the members will appear in ++# declaration order. ++ ++SORT_MEMBER_DOCS = NO ++ ++# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the ++# brief documentation of file, namespace and class members alphabetically ++# by member name. If set to NO (the default) the members will appear in ++# declaration order. ++ ++SORT_BRIEF_DOCS = NO ++ ++# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen ++# will sort the (brief and detailed) documentation of class members so that ++# constructors and destructors are listed first. If set to NO (the default) ++# the constructors will appear in the respective orders defined by ++# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. ++# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO ++# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. ++ ++SORT_MEMBERS_CTORS_1ST = NO ++ ++# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the ++# hierarchy of group names into alphabetical order. If set to NO (the default) ++# the group names will appear in their defined order. ++ ++SORT_GROUP_NAMES = NO ++ ++# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be ++# sorted by fully-qualified names, including namespaces. If set to ++# NO (the default), the class list will be sorted only by class name, ++# not including the namespace part. ++# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. ++# Note: This option applies only to the class list, not to the ++# alphabetical list. ++ ++SORT_BY_SCOPE_NAME = NO ++ ++# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to ++# do proper type resolution of all parameters of a function it will reject a ++# match between the prototype and the implementation of a member function even ++# if there is only one candidate or it is obvious which candidate to choose ++# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen ++# will still accept a match between prototype and implementation in such cases. ++ ++STRICT_PROTO_MATCHING = NO ++ ++# The GENERATE_TODOLIST tag can be used to enable (YES) or ++# disable (NO) the todo list. This list is created by putting \todo ++# commands in the documentation. ++ ++GENERATE_TODOLIST = NO ++ ++# The GENERATE_TESTLIST tag can be used to enable (YES) or ++# disable (NO) the test list. This list is created by putting \test ++# commands in the documentation. ++ ++GENERATE_TESTLIST = NO ++ ++# The GENERATE_BUGLIST tag can be used to enable (YES) or ++# disable (NO) the bug list. This list is created by putting \bug ++# commands in the documentation. ++ ++GENERATE_BUGLIST = NO ++ ++# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or ++# disable (NO) the deprecated list. This list is created by putting ++# \deprecated commands in the documentation. ++ ++GENERATE_DEPRECATEDLIST= NO ++ ++# The ENABLED_SECTIONS tag can be used to enable conditional ++# documentation sections, marked by \if section-label ... \endif ++# and \cond section-label ... \endcond blocks. ++ ++ENABLED_SECTIONS = ++ ++# The MAX_INITIALIZER_LINES tag determines the maximum number of lines ++# the initial value of a variable or macro consists of for it to appear in ++# the documentation. If the initializer consists of more lines than specified ++# here it will be hidden. Use a value of 0 to hide initializers completely. ++# The appearance of the initializer of individual variables and macros in the ++# documentation can be controlled using \showinitializer or \hideinitializer ++# command in the documentation regardless of this setting. ++ ++MAX_INITIALIZER_LINES = 30 ++ ++# Set the SHOW_USED_FILES tag to NO to disable the list of files generated ++# at the bottom of the documentation of classes and structs. If set to YES the ++# list will mention the files that were used to generate the documentation. ++ ++SHOW_USED_FILES = NO ++ ++# Set the SHOW_FILES tag to NO to disable the generation of the Files page. ++# This will remove the Files entry from the Quick Index and from the ++# Folder Tree View (if specified). The default is YES. ++ ++SHOW_FILES = NO ++ ++# Set the SHOW_NAMESPACES tag to NO to disable the generation of the ++# Namespaces page. ++# This will remove the Namespaces entry from the Quick Index ++# and from the Folder Tree View (if specified). The default is YES. ++ ++SHOW_NAMESPACES = NO ++ ++# The FILE_VERSION_FILTER tag can be used to specify a program or script that ++# doxygen should invoke to get the current version for each file (typically from ++# the version control system). Doxygen will invoke the program by executing (via ++# popen()) the command , where is the value of ++# the FILE_VERSION_FILTER tag, and is the name of an input file ++# provided by doxygen. Whatever the program writes to standard output ++# is used as the file version. See the manual for examples. ++ ++FILE_VERSION_FILTER = ++ ++# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed ++# by doxygen. The layout file controls the global structure of the generated ++# output files in an output format independent way. To create the layout file ++# that represents doxygen's defaults, run doxygen with the -l option. ++# You can optionally specify a file name after the option, if omitted ++# DoxygenLayout.xml will be used as the name of the layout file. ++ ++LAYOUT_FILE = ++ ++# The CITE_BIB_FILES tag can be used to specify one or more bib files ++# containing the references data. This must be a list of .bib files. The ++# .bib extension is automatically appended if omitted. Using this command ++# requires the bibtex tool to be installed. See also ++# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style ++# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this ++# feature you need bibtex and perl available in the search path. Do not use ++# file names with spaces, bibtex cannot handle them. ++ ++CITE_BIB_FILES = ++ ++#--------------------------------------------------------------------------- ++# configuration options related to warning and progress messages ++#--------------------------------------------------------------------------- ++ ++# The QUIET tag can be used to turn on/off the messages that are generated ++# by doxygen. Possible values are YES and NO. If left blank NO is used. ++ ++QUIET = YES ++ ++# The WARNINGS tag can be used to turn on/off the warning messages that are ++# generated by doxygen. Possible values are YES and NO. If left blank ++# NO is used. ++ ++WARNINGS = YES ++ ++# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings ++# for undocumented members. If EXTRACT_ALL is set to YES then this flag will ++# automatically be disabled. ++ ++WARN_IF_UNDOCUMENTED = YES ++ ++# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for ++# potential errors in the documentation, such as not documenting some ++# parameters in a documented function, or documenting parameters that ++# don't exist or using markup commands wrongly. ++ ++WARN_IF_DOC_ERROR = YES ++ ++# The WARN_NO_PARAMDOC option can be enabled to get warnings for ++# functions that are documented, but have no documentation for their parameters ++# or return value. If set to NO (the default) doxygen will only warn about ++# wrong or incomplete parameter documentation, but not about the absence of ++# documentation. ++ ++WARN_NO_PARAMDOC = NO ++ ++# The WARN_FORMAT tag determines the format of the warning messages that ++# doxygen can produce. The string should contain the $file, $line, and $text ++# tags, which will be replaced by the file and line number from which the ++# warning originated and the warning text. Optionally the format may contain ++# $version, which will be replaced by the version of the file (if it could ++# be obtained via FILE_VERSION_FILTER) ++ ++WARN_FORMAT = "$file:$line: $text" ++ ++# The WARN_LOGFILE tag can be used to specify a file to which warning ++# and error messages should be written. If left blank the output is written ++# to stderr. ++ ++WARN_LOGFILE = ++ ++#--------------------------------------------------------------------------- ++# configuration options related to the input files ++#--------------------------------------------------------------------------- ++ ++# The INPUT tag can be used to specify the files and/or directories that contain ++# documented source files. You may enter file names like "myfile.cpp" or ++# directories like "/usr/src/myproject". Separate the files or directories ++# with spaces. ++ ++INPUT = lib/notmuch.h ++ ++# This tag can be used to specify the character encoding of the source files ++# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is ++# also the default input encoding. Doxygen uses libiconv (or the iconv built ++# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for ++# the list of possible encodings. ++ ++INPUT_ENCODING = UTF-8 ++ ++# If the value of the INPUT tag contains directories, you can use the ++# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp ++# and *.h) to filter out the source-files in the directories. If left ++# blank the following patterns are tested: ++# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh ++# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py ++# *.f90 *.f *.for *.vhd *.vhdl ++ ++FILE_PATTERNS = ++ ++# The RECURSIVE tag can be used to turn specify whether or not subdirectories ++# should be searched for input files as well. Possible values are YES and NO. ++# If left blank NO is used. ++ ++RECURSIVE = NO ++ ++# The EXCLUDE tag can be used to specify files and/or directories that should be ++# excluded from the INPUT source files. This way you can easily exclude a ++# subdirectory from a directory tree whose root is specified with the INPUT tag. ++# Note that relative paths are relative to the directory from which doxygen is ++# run. ++ ++EXCLUDE = ++ ++# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or ++# directories that are symbolic links (a Unix file system feature) are excluded ++# from the input. ++ ++EXCLUDE_SYMLINKS = NO ++ ++# If the value of the INPUT tag contains directories, you can use the ++# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude ++# certain files from those directories. Note that the wildcards are matched ++# against the file with absolute path, so to exclude all test directories ++# for example use the pattern */test/* ++ ++EXCLUDE_PATTERNS = ++ ++# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names ++# (namespaces, classes, functions, etc.) that should be excluded from the ++# output. The symbol name can be a fully qualified name, a word, or if the ++# wildcard * is used, a substring. Examples: ANamespace, AClass, ++# AClass::ANamespace, ANamespace::*Test ++ ++EXCLUDE_SYMBOLS = ++ ++# The EXAMPLE_PATH tag can be used to specify one or more files or ++# directories that contain example code fragments that are included (see ++# the \include command). ++ ++EXAMPLE_PATH = ++ ++# If the value of the EXAMPLE_PATH tag contains directories, you can use the ++# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp ++# and *.h) to filter out the source-files in the directories. If left ++# blank all files are included. ++ ++EXAMPLE_PATTERNS = ++ ++# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be ++# searched for input files to be used with the \include or \dontinclude ++# commands irrespective of the value of the RECURSIVE tag. ++# Possible values are YES and NO. If left blank NO is used. ++ ++EXAMPLE_RECURSIVE = NO ++ ++# The IMAGE_PATH tag can be used to specify one or more files or ++# directories that contain image that are included in the documentation (see ++# the \image command). ++ ++IMAGE_PATH = ++ ++# The INPUT_FILTER tag can be used to specify a program that doxygen should ++# invoke to filter for each input file. Doxygen will invoke the filter program ++# by executing (via popen()) the command , where ++# is the value of the INPUT_FILTER tag, and is the name of an ++# input file. Doxygen will then use the output that the filter program writes ++# to standard output. ++# If FILTER_PATTERNS is specified, this tag will be ignored. ++# Note that the filter must not add or remove lines; it is applied before the ++# code is scanned, but not when the output code is generated. If lines are added ++# or removed, the anchors will not be placed correctly. ++ ++INPUT_FILTER = ++ ++# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern ++# basis. ++# Doxygen will compare the file name with each pattern and apply the ++# filter if there is a match. ++# The filters are a list of the form: ++# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further ++# info on how filters are used. If FILTER_PATTERNS is empty or if ++# non of the patterns match the file name, INPUT_FILTER is applied. ++ ++FILTER_PATTERNS = ++ ++# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using ++# INPUT_FILTER) will be used to filter the input files when producing source ++# files to browse (i.e. when SOURCE_BROWSER is set to YES). ++ ++FILTER_SOURCE_FILES = NO ++ ++# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file ++# pattern. A pattern will override the setting for FILTER_PATTERN (if any) ++# and it is also possible to disable source filtering for a specific pattern ++# using *.ext= (so without naming a filter). This option only has effect when ++# FILTER_SOURCE_FILES is enabled. ++ ++FILTER_SOURCE_PATTERNS = ++ ++# If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that ++# is part of the input, its contents will be placed on the main page ++# (index.html). This can be useful if you have a project on for instance GitHub ++# and want reuse the introduction page also for the doxygen output. ++ ++USE_MDFILE_AS_MAINPAGE = ++ ++#--------------------------------------------------------------------------- ++# configuration options related to source browsing ++#--------------------------------------------------------------------------- ++ ++# If the SOURCE_BROWSER tag is set to YES then a list of source files will ++# be generated. Documented entities will be cross-referenced with these sources. ++# Note: To get rid of all source code in the generated output, make sure also ++# VERBATIM_HEADERS is set to NO. ++ ++SOURCE_BROWSER = NO ++ ++# Setting the INLINE_SOURCES tag to YES will include the body ++# of functions and classes directly in the documentation. ++ ++INLINE_SOURCES = NO ++ ++# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct ++# doxygen to hide any special comment blocks from generated source code ++# fragments. Normal C, C++ and Fortran comments will always remain visible. ++ ++STRIP_CODE_COMMENTS = YES ++ ++# If the REFERENCED_BY_RELATION tag is set to YES ++# then for each documented function all documented ++# functions referencing it will be listed. ++ ++REFERENCED_BY_RELATION = NO ++ ++# If the REFERENCES_RELATION tag is set to YES ++# then for each documented function all documented entities ++# called/used by that function will be listed. ++ ++REFERENCES_RELATION = NO ++ ++# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) ++# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from ++# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will ++# link to the source code. ++# Otherwise they will link to the documentation. ++ ++REFERENCES_LINK_SOURCE = YES ++ ++# If the USE_HTAGS tag is set to YES then the references to source code ++# will point to the HTML generated by the htags(1) tool instead of doxygen ++# built-in source browser. The htags tool is part of GNU's global source ++# tagging system (see http://www.gnu.org/software/global/global.html). You ++# will need version 4.8.6 or higher. ++ ++USE_HTAGS = NO ++ ++# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen ++# will generate a verbatim copy of the header file for each class for ++# which an include is specified. Set to NO to disable this. ++ ++VERBATIM_HEADERS = NO ++ ++#--------------------------------------------------------------------------- ++# configuration options related to the alphabetical class index ++#--------------------------------------------------------------------------- ++ ++# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index ++# of all compounds will be generated. Enable this if the project ++# contains a lot of classes, structs, unions or interfaces. ++ ++ALPHABETICAL_INDEX = NO ++ ++# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then ++# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns ++# in which this list will be split (can be a number in the range [1..20]) ++ ++COLS_IN_ALPHA_INDEX = 5 ++ ++# In case all classes in a project start with a common prefix, all ++# classes will be put under the same header in the alphabetical index. ++# The IGNORE_PREFIX tag can be used to specify one or more prefixes that ++# should be ignored while generating the index headers. ++ ++IGNORE_PREFIX = ++ ++#--------------------------------------------------------------------------- ++# configuration options related to the HTML output ++#--------------------------------------------------------------------------- ++ ++# If the GENERATE_HTML tag is set to YES (the default) Doxygen will ++# generate HTML output. ++ ++GENERATE_HTML = NO ++ ++# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. ++# If a relative path is entered the value of OUTPUT_DIRECTORY will be ++# put in front of it. If left blank `html' will be used as the default path. ++ ++HTML_OUTPUT = html ++ ++# The HTML_FILE_EXTENSION tag can be used to specify the file extension for ++# each generated HTML page (for example: .htm,.php,.asp). If it is left blank ++# doxygen will generate files with .html extension. ++ ++HTML_FILE_EXTENSION = .html ++ ++# The HTML_HEADER tag can be used to specify a personal HTML header for ++# each generated HTML page. If it is left blank doxygen will generate a ++# standard header. Note that when using a custom header you are responsible ++# for the proper inclusion of any scripts and style sheets that doxygen ++# needs, which is dependent on the configuration options used. ++# It is advised to generate a default header using "doxygen -w html ++# header.html footer.html stylesheet.css YourConfigFile" and then modify ++# that header. Note that the header is subject to change so you typically ++# have to redo this when upgrading to a newer version of doxygen or when ++# changing the value of configuration settings such as GENERATE_TREEVIEW! ++ ++HTML_HEADER = ++ ++# The HTML_FOOTER tag can be used to specify a personal HTML footer for ++# each generated HTML page. If it is left blank doxygen will generate a ++# standard footer. ++ ++HTML_FOOTER = ++ ++# The HTML_STYLESHEET tag can be used to specify a user-defined cascading ++# style sheet that is used by each HTML page. It can be used to ++# fine-tune the look of the HTML output. If left blank doxygen will ++# generate a default style sheet. Note that it is recommended to use ++# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this ++# tag will in the future become obsolete. ++ ++HTML_STYLESHEET = ++ ++# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional ++# user-defined cascading style sheet that is included after the standard ++# style sheets created by doxygen. Using this option one can overrule ++# certain style aspects. This is preferred over using HTML_STYLESHEET ++# since it does not replace the standard style sheet and is therefor more ++# robust against future updates. Doxygen will copy the style sheet file to ++# the output directory. ++ ++HTML_EXTRA_STYLESHEET = ++ ++# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or ++# other source files which should be copied to the HTML output directory. Note ++# that these files will be copied to the base HTML output directory. Use the ++# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these ++# files. In the HTML_STYLESHEET file, use the file name only. Also note that ++# the files will be copied as-is; there are no commands or markers available. ++ ++HTML_EXTRA_FILES = ++ ++# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. ++# Doxygen will adjust the colors in the style sheet and background images ++# according to this color. Hue is specified as an angle on a colorwheel, ++# see http://en.wikipedia.org/wiki/Hue for more information. ++# For instance the value 0 represents red, 60 is yellow, 120 is green, ++# 180 is cyan, 240 is blue, 300 purple, and 360 is red again. ++# The allowed range is 0 to 359. ++ ++HTML_COLORSTYLE_HUE = 220 ++ ++# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of ++# the colors in the HTML output. For a value of 0 the output will use ++# grayscales only. A value of 255 will produce the most vivid colors. ++ ++HTML_COLORSTYLE_SAT = 100 ++ ++# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to ++# the luminance component of the colors in the HTML output. Values below ++# 100 gradually make the output lighter, whereas values above 100 make ++# the output darker. The value divided by 100 is the actual gamma applied, ++# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, ++# and 100 does not change the gamma. ++ ++HTML_COLORSTYLE_GAMMA = 80 ++ ++# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML ++# page will contain the date and time when the page was generated. Setting ++# this to NO can help when comparing the output of multiple runs. ++ ++HTML_TIMESTAMP = YES ++ ++# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML ++# documentation will contain sections that can be hidden and shown after the ++# page has loaded. ++ ++HTML_DYNAMIC_SECTIONS = NO ++ ++# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of ++# entries shown in the various tree structured indices initially; the user ++# can expand and collapse entries dynamically later on. Doxygen will expand ++# the tree to such a level that at most the specified number of entries are ++# visible (unless a fully collapsed tree already exceeds this amount). ++# So setting the number of entries 1 will produce a full collapsed tree by ++# default. 0 is a special value representing an infinite number of entries ++# and will result in a full expanded tree by default. ++ ++HTML_INDEX_NUM_ENTRIES = 100 ++ ++# If the GENERATE_DOCSET tag is set to YES, additional index files ++# will be generated that can be used as input for Apple's Xcode 3 ++# integrated development environment, introduced with OSX 10.5 (Leopard). ++# To create a documentation set, doxygen will generate a Makefile in the ++# HTML output directory. Running make will produce the docset in that ++# directory and running "make install" will install the docset in ++# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find ++# it at startup. ++# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html ++# for more information. ++ ++GENERATE_DOCSET = NO ++ ++# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the ++# feed. A documentation feed provides an umbrella under which multiple ++# documentation sets from a single provider (such as a company or product suite) ++# can be grouped. ++ ++DOCSET_FEEDNAME = "Doxygen generated docs" ++ ++# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that ++# should uniquely identify the documentation set bundle. This should be a ++# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen ++# will append .docset to the name. ++ ++DOCSET_BUNDLE_ID = org.doxygen.Project ++ ++# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely ++# identify the documentation publisher. This should be a reverse domain-name ++# style string, e.g. com.mycompany.MyDocSet.documentation. ++ ++DOCSET_PUBLISHER_ID = org.doxygen.Publisher ++ ++# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher. ++ ++DOCSET_PUBLISHER_NAME = Publisher ++ ++# If the GENERATE_HTMLHELP tag is set to YES, additional index files ++# will be generated that can be used as input for tools like the ++# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) ++# of the generated HTML documentation. ++ ++GENERATE_HTMLHELP = NO ++ ++# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can ++# be used to specify the file name of the resulting .chm file. You ++# can add a path in front of the file if the result should not be ++# written to the html output directory. ++ ++CHM_FILE = ++ ++# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can ++# be used to specify the location (absolute path including file name) of ++# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run ++# the HTML help compiler on the generated index.hhp. ++ ++HHC_LOCATION = ++ ++# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag ++# controls if a separate .chi index file is generated (YES) or that ++# it should be included in the master .chm file (NO). ++ ++GENERATE_CHI = NO ++ ++# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING ++# is used to encode HtmlHelp index (hhk), content (hhc) and project file ++# content. ++ ++CHM_INDEX_ENCODING = ++ ++# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag ++# controls whether a binary table of contents is generated (YES) or a ++# normal table of contents (NO) in the .chm file. ++ ++BINARY_TOC = NO ++ ++# The TOC_EXPAND flag can be set to YES to add extra items for group members ++# to the contents of the HTML help documentation and to the tree view. ++ ++TOC_EXPAND = NO ++ ++# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and ++# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated ++# that can be used as input for Qt's qhelpgenerator to generate a ++# Qt Compressed Help (.qch) of the generated HTML documentation. ++ ++GENERATE_QHP = NO ++ ++# If the QHG_LOCATION tag is specified, the QCH_FILE tag can ++# be used to specify the file name of the resulting .qch file. ++# The path specified is relative to the HTML output folder. ++ ++QCH_FILE = ++ ++# The QHP_NAMESPACE tag specifies the namespace to use when generating ++# Qt Help Project output. For more information please see ++# http://doc.trolltech.com/qthelpproject.html#namespace ++ ++QHP_NAMESPACE = org.doxygen.Project ++ ++# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating ++# Qt Help Project output. For more information please see ++# http://doc.trolltech.com/qthelpproject.html#virtual-folders ++ ++QHP_VIRTUAL_FOLDER = doc ++ ++# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to ++# add. For more information please see ++# http://doc.trolltech.com/qthelpproject.html#custom-filters ++ ++QHP_CUST_FILTER_NAME = ++ ++# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the ++# custom filter to add. For more information please see ++# ++# Qt Help Project / Custom Filters. ++ ++QHP_CUST_FILTER_ATTRS = ++ ++# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this ++# project's ++# filter section matches. ++# ++# Qt Help Project / Filter Attributes. ++ ++QHP_SECT_FILTER_ATTRS = ++ ++# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can ++# be used to specify the location of Qt's qhelpgenerator. ++# If non-empty doxygen will try to run qhelpgenerator on the generated ++# .qhp file. ++ ++QHG_LOCATION = ++ ++# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files ++# will be generated, which together with the HTML files, form an Eclipse help ++# plugin. To install this plugin and make it available under the help contents ++# menu in Eclipse, the contents of the directory containing the HTML and XML ++# files needs to be copied into the plugins directory of eclipse. The name of ++# the directory within the plugins directory should be the same as ++# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before ++# the help appears. ++ ++GENERATE_ECLIPSEHELP = NO ++ ++# A unique identifier for the eclipse help plugin. When installing the plugin ++# the directory name containing the HTML and XML files should also have ++# this name. ++ ++ECLIPSE_DOC_ID = org.doxygen.Project ++ ++# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) ++# at top of each HTML page. The value NO (the default) enables the index and ++# the value YES disables it. Since the tabs have the same information as the ++# navigation tree you can set this option to NO if you already set ++# GENERATE_TREEVIEW to YES. ++ ++DISABLE_INDEX = NO ++ ++# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index ++# structure should be generated to display hierarchical information. ++# If the tag value is set to YES, a side panel will be generated ++# containing a tree-like index structure (just like the one that ++# is generated for HTML Help). For this to work a browser that supports ++# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). ++# Windows users are probably better off using the HTML help feature. ++# Since the tree basically has the same information as the tab index you ++# could consider to set DISABLE_INDEX to NO when enabling this option. ++ ++GENERATE_TREEVIEW = NO ++ ++# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values ++# (range [0,1..20]) that doxygen will group on one line in the generated HTML ++# documentation. Note that a value of 0 will completely suppress the enum ++# values from appearing in the overview section. ++ ++ENUM_VALUES_PER_LINE = 4 ++ ++# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be ++# used to set the initial width (in pixels) of the frame in which the tree ++# is shown. ++ ++TREEVIEW_WIDTH = 250 ++ ++# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open ++# links to external symbols imported via tag files in a separate window. ++ ++EXT_LINKS_IN_WINDOW = NO ++ ++# Use this tag to change the font size of Latex formulas included ++# as images in the HTML documentation. The default is 10. Note that ++# when you change the font size after a successful doxygen run you need ++# to manually remove any form_*.png images from the HTML output directory ++# to force them to be regenerated. ++ ++FORMULA_FONTSIZE = 10 ++ ++# Use the FORMULA_TRANPARENT tag to determine whether or not the images ++# generated for formulas are transparent PNGs. Transparent PNGs are ++# not supported properly for IE 6.0, but are supported on all modern browsers. ++# Note that when changing this option you need to delete any form_*.png files ++# in the HTML output before the changes have effect. ++ ++FORMULA_TRANSPARENT = YES ++ ++# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax ++# (see http://www.mathjax.org) which uses client side Javascript for the ++# rendering instead of using prerendered bitmaps. Use this if you do not ++# have LaTeX installed or if you want to formulas look prettier in the HTML ++# output. When enabled you may also need to install MathJax separately and ++# configure the path to it using the MATHJAX_RELPATH option. ++ ++USE_MATHJAX = NO ++ ++# When MathJax is enabled you can set the default output format to be used for ++# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and ++# SVG. The default value is HTML-CSS, which is slower, but has the best ++# compatibility. ++ ++MATHJAX_FORMAT = HTML-CSS ++ ++# When MathJax is enabled you need to specify the location relative to the ++# HTML output directory using the MATHJAX_RELPATH option. The destination ++# directory should contain the MathJax.js script. For instance, if the mathjax ++# directory is located at the same level as the HTML output directory, then ++# MATHJAX_RELPATH should be ../mathjax. The default value points to ++# the MathJax Content Delivery Network so you can quickly see the result without ++# installing MathJax. ++# However, it is strongly recommended to install a local ++# copy of MathJax from http://www.mathjax.org before deployment. ++ ++MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest ++ ++# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension ++# names that should be enabled during MathJax rendering. ++ ++MATHJAX_EXTENSIONS = ++ ++# The MATHJAX_CODEFILE tag can be used to specify a file with javascript ++# pieces of code that will be used on startup of the MathJax code. ++ ++MATHJAX_CODEFILE = ++ ++# When the SEARCHENGINE tag is enabled doxygen will generate a search box ++# for the HTML output. The underlying search engine uses javascript ++# and DHTML and should work on any modern browser. Note that when using ++# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets ++# (GENERATE_DOCSET) there is already a search function so this one should ++# typically be disabled. For large projects the javascript based search engine ++# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. ++ ++SEARCHENGINE = YES ++ ++# When the SERVER_BASED_SEARCH tag is enabled the search engine will be ++# implemented using a web server instead of a web client using Javascript. ++# There are two flavours of web server based search depending on the ++# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for ++# searching and an index file used by the script. When EXTERNAL_SEARCH is ++# enabled the indexing and searching needs to be provided by external tools. ++# See the manual for details. ++ ++SERVER_BASED_SEARCH = NO ++ ++# When EXTERNAL_SEARCH is enabled doxygen will no longer generate the PHP ++# script for searching. Instead the search results are written to an XML file ++# which needs to be processed by an external indexer. Doxygen will invoke an ++# external search engine pointed to by the SEARCHENGINE_URL option to obtain ++# the search results. Doxygen ships with an example indexer (doxyindexer) and ++# search engine (doxysearch.cgi) which are based on the open source search ++# engine library Xapian. See the manual for configuration details. ++ ++EXTERNAL_SEARCH = NO ++ ++# The SEARCHENGINE_URL should point to a search engine hosted by a web server ++# which will returned the search results when EXTERNAL_SEARCH is enabled. ++# Doxygen ships with an example search engine (doxysearch) which is based on ++# the open source search engine library Xapian. See the manual for configuration ++# details. ++ ++SEARCHENGINE_URL = ++ ++# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed ++# search data is written to a file for indexing by an external tool. With the ++# SEARCHDATA_FILE tag the name of this file can be specified. ++ ++SEARCHDATA_FILE = searchdata.xml ++ ++# When SERVER_BASED_SEARCH AND EXTERNAL_SEARCH are both enabled the ++# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is ++# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple ++# projects and redirect the results back to the right project. ++ ++EXTERNAL_SEARCH_ID = ++ ++# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen ++# projects other than the one defined by this configuration file, but that are ++# all added to the same external search index. Each project needs to have a ++# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id ++# of to a relative location where the documentation can be found. ++# The format is: EXTRA_SEARCH_MAPPINGS = id1=loc1 id2=loc2 ... ++ ++EXTRA_SEARCH_MAPPINGS = ++ ++#--------------------------------------------------------------------------- ++# configuration options related to the LaTeX output ++#--------------------------------------------------------------------------- ++ ++# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will ++# generate Latex output. ++ ++GENERATE_LATEX = NO ++ ++# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. ++# If a relative path is entered the value of OUTPUT_DIRECTORY will be ++# put in front of it. If left blank `latex' will be used as the default path. ++ ++LATEX_OUTPUT = latex ++ ++# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be ++# invoked. If left blank `latex' will be used as the default command name. ++# Note that when enabling USE_PDFLATEX this option is only used for ++# generating bitmaps for formulas in the HTML output, but not in the ++# Makefile that is written to the output directory. ++ ++LATEX_CMD_NAME = latex ++ ++# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to ++# generate index for LaTeX. If left blank `makeindex' will be used as the ++# default command name. ++ ++MAKEINDEX_CMD_NAME = makeindex ++ ++# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact ++# LaTeX documents. This may be useful for small projects and may help to ++# save some trees in general. ++ ++COMPACT_LATEX = NO ++ ++# The PAPER_TYPE tag can be used to set the paper type that is used ++# by the printer. Possible values are: a4, letter, legal and ++# executive. If left blank a4 will be used. ++ ++PAPER_TYPE = a4 ++ ++# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX ++# packages that should be included in the LaTeX output. ++ ++EXTRA_PACKAGES = ++ ++# The LATEX_HEADER tag can be used to specify a personal LaTeX header for ++# the generated latex document. The header should contain everything until ++# the first chapter. If it is left blank doxygen will generate a ++# standard header. Notice: only use this tag if you know what you are doing! ++ ++LATEX_HEADER = ++ ++# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for ++# the generated latex document. The footer should contain everything after ++# the last chapter. If it is left blank doxygen will generate a ++# standard footer. Notice: only use this tag if you know what you are doing! ++ ++LATEX_FOOTER = ++ ++# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images ++# or other source files which should be copied to the LaTeX output directory. ++# Note that the files will be copied as-is; there are no commands or markers ++# available. ++ ++LATEX_EXTRA_FILES = ++ ++# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated ++# is prepared for conversion to pdf (using ps2pdf). The pdf file will ++# contain links (just like the HTML output) instead of page references ++# This makes the output suitable for online browsing using a pdf viewer. ++ ++PDF_HYPERLINKS = YES ++ ++# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of ++# plain latex in the generated Makefile. Set this option to YES to get a ++# higher quality PDF documentation. ++ ++USE_PDFLATEX = YES ++ ++# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. ++# command to the generated LaTeX files. This will instruct LaTeX to keep ++# running if errors occur, instead of asking the user for help. ++# This option is also used when generating formulas in HTML. ++ ++LATEX_BATCHMODE = NO ++ ++# If LATEX_HIDE_INDICES is set to YES then doxygen will not ++# include the index chapters (such as File Index, Compound Index, etc.) ++# in the output. ++ ++LATEX_HIDE_INDICES = NO ++ ++# If LATEX_SOURCE_CODE is set to YES then doxygen will include ++# source code with syntax highlighting in the LaTeX output. ++# Note that which sources are shown also depends on other settings ++# such as SOURCE_BROWSER. ++ ++LATEX_SOURCE_CODE = NO ++ ++# The LATEX_BIB_STYLE tag can be used to specify the style to use for the ++# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See ++# http://en.wikipedia.org/wiki/BibTeX for more info. ++ ++LATEX_BIB_STYLE = plain ++ ++#--------------------------------------------------------------------------- ++# configuration options related to the RTF output ++#--------------------------------------------------------------------------- ++ ++# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output ++# The RTF output is optimized for Word 97 and may not look very pretty with ++# other RTF readers or editors. ++ ++GENERATE_RTF = NO ++ ++# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. ++# If a relative path is entered the value of OUTPUT_DIRECTORY will be ++# put in front of it. If left blank `rtf' will be used as the default path. ++ ++RTF_OUTPUT = rtf ++ ++# If the COMPACT_RTF tag is set to YES Doxygen generates more compact ++# RTF documents. This may be useful for small projects and may help to ++# save some trees in general. ++ ++COMPACT_RTF = NO ++ ++# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated ++# will contain hyperlink fields. The RTF file will ++# contain links (just like the HTML output) instead of page references. ++# This makes the output suitable for online browsing using WORD or other ++# programs which support those fields. ++# Note: wordpad (write) and others do not support links. ++ ++RTF_HYPERLINKS = NO ++ ++# Load style sheet definitions from file. Syntax is similar to doxygen's ++# config file, i.e. a series of assignments. You only have to provide ++# replacements, missing definitions are set to their default value. ++ ++RTF_STYLESHEET_FILE = ++ ++# Set optional variables used in the generation of an rtf document. ++# Syntax is similar to doxygen's config file. ++ ++RTF_EXTENSIONS_FILE = ++ ++#--------------------------------------------------------------------------- ++# configuration options related to the man page output ++#--------------------------------------------------------------------------- ++ ++# If the GENERATE_MAN tag is set to YES (the default) Doxygen will ++# generate man pages ++ ++GENERATE_MAN = YES ++ ++# The MAN_OUTPUT tag is used to specify where the man pages will be put. ++# If a relative path is entered the value of OUTPUT_DIRECTORY will be ++# put in front of it. If left blank `man' will be used as the default path. ++ ++MAN_OUTPUT = man ++ ++# The MAN_EXTENSION tag determines the extension that is added to ++# the generated man pages (default is the subroutine's section .3) ++ ++MAN_EXTENSION = .3 ++ ++# If the MAN_LINKS tag is set to YES and Doxygen generates man output, ++# then it will generate one additional man file for each entity ++# documented in the real man page(s). These additional files ++# only source the real man page, but without them the man command ++# would be unable to find the correct page. The default is NO. ++ ++MAN_LINKS = NO ++ ++#--------------------------------------------------------------------------- ++# configuration options related to the XML output ++#--------------------------------------------------------------------------- ++ ++# If the GENERATE_XML tag is set to YES Doxygen will ++# generate an XML file that captures the structure of ++# the code including all documentation. ++ ++GENERATE_XML = NO ++ ++# The XML_OUTPUT tag is used to specify where the XML pages will be put. ++# If a relative path is entered the value of OUTPUT_DIRECTORY will be ++# put in front of it. If left blank `xml' will be used as the default path. ++ ++XML_OUTPUT = xml ++ ++# The XML_SCHEMA tag can be used to specify an XML schema, ++# which can be used by a validating XML parser to check the ++# syntax of the XML files. ++ ++XML_SCHEMA = ++ ++# The XML_DTD tag can be used to specify an XML DTD, ++# which can be used by a validating XML parser to check the ++# syntax of the XML files. ++ ++XML_DTD = ++ ++# If the XML_PROGRAMLISTING tag is set to YES Doxygen will ++# dump the program listings (including syntax highlighting ++# and cross-referencing information) to the XML output. Note that ++# enabling this will significantly increase the size of the XML output. ++ ++XML_PROGRAMLISTING = YES ++ ++#--------------------------------------------------------------------------- ++# configuration options related to the DOCBOOK output ++#--------------------------------------------------------------------------- ++ ++# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files ++# that can be used to generate PDF. ++ ++GENERATE_DOCBOOK = NO ++ ++# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. ++# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in ++# front of it. If left blank docbook will be used as the default path. ++ ++DOCBOOK_OUTPUT = docbook ++ ++#--------------------------------------------------------------------------- ++# configuration options for the AutoGen Definitions output ++#--------------------------------------------------------------------------- ++ ++# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will ++# generate an AutoGen Definitions (see autogen.sf.net) file ++# that captures the structure of the code including all ++# documentation. Note that this feature is still experimental ++# and incomplete at the moment. ++ ++GENERATE_AUTOGEN_DEF = NO ++ ++#--------------------------------------------------------------------------- ++# configuration options related to the Perl module output ++#--------------------------------------------------------------------------- ++ ++# If the GENERATE_PERLMOD tag is set to YES Doxygen will ++# generate a Perl module file that captures the structure of ++# the code including all documentation. Note that this ++# feature is still experimental and incomplete at the ++# moment. ++ ++GENERATE_PERLMOD = NO ++ ++# If the PERLMOD_LATEX tag is set to YES Doxygen will generate ++# the necessary Makefile rules, Perl scripts and LaTeX code to be able ++# to generate PDF and DVI output from the Perl module output. ++ ++PERLMOD_LATEX = NO ++ ++# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be ++# nicely formatted so it can be parsed by a human reader. ++# This is useful ++# if you want to understand what is going on. ++# On the other hand, if this ++# tag is set to NO the size of the Perl module output will be much smaller ++# and Perl will parse it just the same. ++ ++PERLMOD_PRETTY = YES ++ ++# The names of the make variables in the generated doxyrules.make file ++# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. ++# This is useful so different doxyrules.make files included by the same ++# Makefile don't overwrite each other's variables. ++ ++PERLMOD_MAKEVAR_PREFIX = ++ ++#--------------------------------------------------------------------------- ++# Configuration options related to the preprocessor ++#--------------------------------------------------------------------------- ++ ++# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will ++# evaluate all C-preprocessor directives found in the sources and include ++# files. ++ ++ENABLE_PREPROCESSING = YES ++ ++# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro ++# names in the source code. If set to NO (the default) only conditional ++# compilation will be performed. Macro expansion can be done in a controlled ++# way by setting EXPAND_ONLY_PREDEF to YES. ++ ++MACRO_EXPANSION = NO ++ ++# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES ++# then the macro expansion is limited to the macros specified with the ++# PREDEFINED and EXPAND_AS_DEFINED tags. ++ ++EXPAND_ONLY_PREDEF = NO ++ ++# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files ++# pointed to by INCLUDE_PATH will be searched when a #include is found. ++ ++SEARCH_INCLUDES = NO ++ ++# The INCLUDE_PATH tag can be used to specify one or more directories that ++# contain include files that are not input files but should be processed by ++# the preprocessor. ++ ++INCLUDE_PATH = ++ ++# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard ++# patterns (like *.h and *.hpp) to filter out the header-files in the ++# directories. If left blank, the patterns specified with FILE_PATTERNS will ++# be used. ++ ++INCLUDE_FILE_PATTERNS = ++ ++# The PREDEFINED tag can be used to specify one or more macro names that ++# are defined before the preprocessor is started (similar to the -D option of ++# gcc). The argument of the tag is a list of macros of the form: name ++# or name=definition (no spaces). If the definition and the = are ++# omitted =1 is assumed. To prevent a macro definition from being ++# undefined via #undef or recursively expanded use the := operator ++# instead of the = operator. ++ ++PREDEFINED = __DOXYGEN__ ++ ++# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then ++# this tag can be used to specify a list of macro names that should be expanded. ++# The macro definition that is found in the sources will be used. ++# Use the PREDEFINED tag if you want to use a different macro definition that ++# overrules the definition found in the source code. ++ ++EXPAND_AS_DEFINED = ++ ++# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then ++# doxygen's preprocessor will remove all references to function-like macros ++# that are alone on a line, have an all uppercase name, and do not end with a ++# semicolon, because these will confuse the parser if not removed. ++ ++SKIP_FUNCTION_MACROS = YES ++ ++#--------------------------------------------------------------------------- ++# Configuration::additions related to external references ++#--------------------------------------------------------------------------- ++ ++# The TAGFILES option can be used to specify one or more tagfiles. For each ++# tag file the location of the external documentation should be added. The ++# format of a tag file without this location is as follows: ++# ++# TAGFILES = file1 file2 ... ++# Adding location for the tag files is done as follows: ++# ++# TAGFILES = file1=loc1 "file2 = loc2" ... ++# where "loc1" and "loc2" can be relative or absolute paths ++# or URLs. Note that each tag file must have a unique name (where the name does ++# NOT include the path). If a tag file is not located in the directory in which ++# doxygen is run, you must also specify the path to the tagfile here. ++ ++TAGFILES = ++ ++# When a file name is specified after GENERATE_TAGFILE, doxygen will create ++# a tag file that is based on the input files it reads. ++ ++GENERATE_TAGFILE = ++ ++# If the ALLEXTERNALS tag is set to YES all external classes will be listed ++# in the class index. If set to NO only the inherited external classes ++# will be listed. ++ ++ALLEXTERNALS = NO ++ ++# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed ++# in the modules index. If set to NO, only the current project's groups will ++# be listed. ++ ++EXTERNAL_GROUPS = NO ++ ++# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed ++# in the related pages index. If set to NO, only the current project's ++# pages will be listed. ++ ++EXTERNAL_PAGES = NO ++ ++# The PERL_PATH should be the absolute path and name of the perl script ++# interpreter (i.e. the result of `which perl'). ++ ++PERL_PATH = /usr/bin/perl ++ ++#--------------------------------------------------------------------------- ++# Configuration options related to the dot tool ++#--------------------------------------------------------------------------- ++ ++# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will ++# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base ++# or super classes. Setting the tag to NO turns the diagrams off. Note that ++# this option also works with HAVE_DOT disabled, but it is recommended to ++# install and use dot, since it yields more powerful graphs. ++ ++CLASS_DIAGRAMS = NO ++ ++# You can define message sequence charts within doxygen comments using the \msc ++# command. Doxygen will then run the mscgen tool (see ++# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the ++# documentation. The MSCGEN_PATH tag allows you to specify the directory where ++# the mscgen tool resides. If left empty the tool is assumed to be found in the ++# default search path. ++ ++MSCGEN_PATH = ++ ++# If set to YES, the inheritance and collaboration graphs will hide ++# inheritance and usage relations if the target is undocumented ++# or is not a class. ++ ++HIDE_UNDOC_RELATIONS = YES ++ ++# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is ++# available from the path. This tool is part of Graphviz, a graph visualization ++# toolkit from AT&T and Lucent Bell Labs. The other options in this section ++# have no effect if this option is set to NO (the default) ++ ++HAVE_DOT = NO ++ ++# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is ++# allowed to run in parallel. When set to 0 (the default) doxygen will ++# base this on the number of processors available in the system. You can set it ++# explicitly to a value larger than 0 to get control over the balance ++# between CPU load and processing speed. ++ ++DOT_NUM_THREADS = 0 ++ ++# By default doxygen will use the Helvetica font for all dot files that ++# doxygen generates. When you want a differently looking font you can specify ++# the font name using DOT_FONTNAME. You need to make sure dot is able to find ++# the font, which can be done by putting it in a standard location or by setting ++# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the ++# directory containing the font. ++ ++DOT_FONTNAME = Helvetica ++ ++# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. ++# The default size is 10pt. ++ ++DOT_FONTSIZE = 10 ++ ++# By default doxygen will tell dot to use the Helvetica font. ++# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to ++# set the path where dot can find it. ++ ++DOT_FONTPATH = ++ ++# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen ++# will generate a graph for each documented class showing the direct and ++# indirect inheritance relations. Setting this tag to YES will force the ++# CLASS_DIAGRAMS tag to NO. ++ ++CLASS_GRAPH = YES ++ ++# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen ++# will generate a graph for each documented class showing the direct and ++# indirect implementation dependencies (inheritance, containment, and ++# class references variables) of the class with other documented classes. ++ ++COLLABORATION_GRAPH = YES ++ ++# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen ++# will generate a graph for groups, showing the direct groups dependencies ++ ++GROUP_GRAPHS = YES ++ ++# If the UML_LOOK tag is set to YES doxygen will generate inheritance and ++# collaboration diagrams in a style similar to the OMG's Unified Modeling ++# Language. ++ ++UML_LOOK = NO ++ ++# If the UML_LOOK tag is enabled, the fields and methods are shown inside ++# the class node. If there are many fields or methods and many nodes the ++# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS ++# threshold limits the number of items for each type to make the size more ++# manageable. Set this to 0 for no limit. Note that the threshold may be ++# exceeded by 50% before the limit is enforced. ++ ++UML_LIMIT_NUM_FIELDS = 10 ++ ++# If set to YES, the inheritance and collaboration graphs will show the ++# relations between templates and their instances. ++ ++TEMPLATE_RELATIONS = NO ++ ++# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT ++# tags are set to YES then doxygen will generate a graph for each documented ++# file showing the direct and indirect include dependencies of the file with ++# other documented files. ++ ++INCLUDE_GRAPH = NO ++ ++# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and ++# HAVE_DOT tags are set to YES then doxygen will generate a graph for each ++# documented header file showing the documented files that directly or ++# indirectly include this file. ++ ++INCLUDED_BY_GRAPH = NO ++ ++# If the CALL_GRAPH and HAVE_DOT options are set to YES then ++# doxygen will generate a call dependency graph for every global function ++# or class method. Note that enabling this option will significantly increase ++# the time of a run. So in most cases it will be better to enable call graphs ++# for selected functions only using the \callgraph command. ++ ++CALL_GRAPH = NO ++ ++# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then ++# doxygen will generate a caller dependency graph for every global function ++# or class method. Note that enabling this option will significantly increase ++# the time of a run. So in most cases it will be better to enable caller ++# graphs for selected functions only using the \callergraph command. ++ ++CALLER_GRAPH = NO ++ ++# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen ++# will generate a graphical hierarchy of all classes instead of a textual one. ++ ++GRAPHICAL_HIERARCHY = NO ++ ++# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES ++# then doxygen will show the dependencies a directory has on other directories ++# in a graphical way. The dependency relations are determined by the #include ++# relations between the files in the directories. ++ ++DIRECTORY_GRAPH = NO ++ ++# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images ++# generated by dot. Possible values are svg, png, jpg, or gif. ++# If left blank png will be used. If you choose svg you need to set ++# HTML_FILE_EXTENSION to xhtml in order to make the SVG files ++# visible in IE 9+ (other browsers do not have this requirement). ++ ++DOT_IMAGE_FORMAT = png ++ ++# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to ++# enable generation of interactive SVG images that allow zooming and panning. ++# Note that this requires a modern browser other than Internet Explorer. ++# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you ++# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files ++# visible. Older versions of IE do not have SVG support. ++ ++INTERACTIVE_SVG = NO ++ ++# The tag DOT_PATH can be used to specify the path where the dot tool can be ++# found. If left blank, it is assumed the dot tool can be found in the path. ++ ++DOT_PATH = ++ ++# The DOTFILE_DIRS tag can be used to specify one or more directories that ++# contain dot files that are included in the documentation (see the ++# \dotfile command). ++ ++DOTFILE_DIRS = ++ ++# The MSCFILE_DIRS tag can be used to specify one or more directories that ++# contain msc files that are included in the documentation (see the ++# \mscfile command). ++ ++MSCFILE_DIRS = ++ ++# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of ++# nodes that will be shown in the graph. If the number of nodes in a graph ++# becomes larger than this value, doxygen will truncate the graph, which is ++# visualized by representing a node as a red box. Note that doxygen if the ++# number of direct children of the root node in a graph is already larger than ++# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note ++# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. ++ ++DOT_GRAPH_MAX_NODES = 50 ++ ++# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the ++# graphs generated by dot. A depth value of 3 means that only nodes reachable ++# from the root by following a path via at most 3 edges will be shown. Nodes ++# that lay further from the root node will be omitted. Note that setting this ++# option to 1 or 2 may greatly reduce the computation time needed for large ++# code bases. Also note that the size of a graph can be further restricted by ++# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. ++ ++MAX_DOT_GRAPH_DEPTH = 0 ++ ++# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent ++# background. This is disabled by default, because dot on Windows does not ++# seem to support this out of the box. Warning: Depending on the platform used, ++# enabling this option may lead to badly anti-aliased labels on the edges of ++# a graph (i.e. they become hard to read). ++ ++DOT_TRANSPARENT = NO ++ ++# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output ++# files in one run (i.e. multiple -o and -T options on the command line). This ++# makes dot run faster, but since only newer versions of dot (>1.8.10) ++# support this, this feature is disabled by default. ++ ++DOT_MULTI_TARGETS = YES ++ ++# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will ++# generate a legend page explaining the meaning of the various boxes and ++# arrows in the dot generated graphs. ++ ++GENERATE_LEGEND = NO ++ ++# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will ++# remove the intermediate dot files that are used to generate ++# the various graphs. ++ ++DOT_CLEANUP = YES +-- +1.8.4.2 + -- 2.26.2