From 21cc422097e01b2b7f55526f0589d7fbea1950e8 Mon Sep 17 00:00:00 2001
From: Junio C Hamano <junio@hera.kernel.org>
Date: Thu, 2 Mar 2006 09:15:01 +0000
Subject: [PATCH] Autogenerated man pages for v1.2.4-gec57

---
 man1/git-am.1        | 17 +++++++++++------
 man1/git-apply.1     | 39 +++++++++++++++++++++++++++++++++++----
 man1/git-read-tree.1 | 24 +++++++++++++++++++++---
 man1/git-rev-list.1  | 16 ++++++++++------
 4 files changed, 77 insertions(+), 19 deletions(-)

diff --git a/man1/git-am.1 b/man1/git-am.1
index c1e5164e7..c9d321d88 100755
--- a/man1/git-am.1
+++ b/man1/git-am.1
@@ -23,8 +23,9 @@ git-am \- Apply a series of patches in a mailbox
 .SH "SYNOPSIS"
 
 .nf
-git\-am [\-\-signoff] [\-\-dotest=<dir>] [\-\-utf8] [\-\-binary] [\-\-3way] <mbox>...
-git\-am [\-\-skip | \-\-resolved]
+\fIgit\-am\fR [\-\-signoff] [\-\-dotest=<dir>] [\-\-utf8] [\-\-binary] [\-\-3way]
+         [\-\-interactive] [\-\-whitespace=<option>] <mbox>...
+\fIgit\-am\fR [\-\-skip | \-\-resolved]
 .fi
 
 .SH "DESCRIPTION"
@@ -58,6 +59,10 @@ When the patch does not apply cleanly, fall back on 3\-way merge, if the patch r
 \-\-skip
 Skip the current patch\&. This is only meaningful when restarting an aborted patch\&.
 
+.TP
+\-\-whitespace=<option>
+This flag is passed to the git\-apply program that applies the patch\&.
+
 .TP
 \-\-interactive
 Run interactively, just like git\-applymbox\&.
@@ -69,14 +74,14 @@ After a patch failure (e\&.g\&. attempting to apply conflicting patch), the user
 .SH "DISCUSSION"
 
 
-When initially invoking it, you give it names of the mailboxes to crunch\&. Upon seeing the first patch that does not apply, it aborts in the middle, just like git\-applymbox does\&. You can recover from this in one of two ways:
+When initially invoking it, you give it names of the mailboxes to crunch\&. Upon seeing the first patch that does not apply, it aborts in the middle, just like \fIgit\-applymbox\fR does\&. You can recover from this in one of two ways:
 
 .TP 3
 1.
-skip the current one by re\-running the command with \-\-skip option\&.
+skip the current one by re\-running the command with \fI\-\-skip\fR option\&.
 .TP
 2.
-hand resolve the conflict in the working directory, and update the index file to bring it in a state that the patch should have produced\&. Then run the command with \-\-resolved option\&.
+hand resolve the conflict in the working directory, and update the index file to bring it in a state that the patch should have produced\&. Then run the command with \fI\-\-resolved\fR option\&.
 .LP
 
 
@@ -85,7 +90,7 @@ The command refuses to process new mailboxes while \&.dotest directory exists, s
 .SH "SEE ALSO"
 
 
-\fBgit\-applymbox\fR(1), \fBgit\-applypatch\fR(1)\&.
+\fBgit\-applymbox\fR(1), \fBgit\-applypatch\fR(1), \fBgit\-apply\fR(1)\&.
 
 .SH "AUTHOR"
 
diff --git a/man1/git-apply.1 b/man1/git-apply.1
index dc9084c8a..b5c91f10b 100755
--- a/man1/git-apply.1
+++ b/man1/git-apply.1
@@ -23,8 +23,9 @@ git-apply \- Apply patch on a git index file and a work tree
 .SH "SYNOPSIS"
 
 .nf
-git\-apply [\-\-stat] [\-\-numstat] [\-\-summary] [\-\-check] [\-\-index] [\-\-apply]
+\fIgit\-apply\fR [\-\-stat] [\-\-numstat] [\-\-summary] [\-\-check] [\-\-index] [\-\-apply]
           [\-\-no\-add] [\-\-index\-info] [\-\-allow\-binary\-replacement] [\-z] [\-pNUM]
+          [\-\-whitespace=<nowarn|warn|error|error\-all|strip>]
           [<patch>...]
 .fi
 
@@ -37,7 +38,7 @@ Reads supplied diff output and applies it on a git index file and a work tree\&.
 
 .TP
 <patch>...
-The files to read patch from\&. \- can be used to read from the standard input\&.
+The files to read patch from\&. \fI\-\fR can be used to read from the standard input\&.
 
 .TP
 \-\-stat
@@ -61,7 +62,7 @@ When \-\-check is in effect, or when applying the patch (which is the default wh
 
 .TP
 \-\-index\-info
-Newer git\-diff output has embedded index information for each blob to help identify the original version that the patch applies to\&. When this flag is given, and if the original version of the blob is available locally, outputs information about them to the standard output\&.
+Newer git\-diff output has embedded \fIindex information\fR for each blob to help identify the original version that the patch applies to\&. When this flag is given, and if the original version of the blob is available locally, outputs information about them to the standard output\&.
 
 .TP
 \-z
@@ -73,7 +74,7 @@ Remove <n> leading slashes from traditional diff paths\&. The default is 1\&.
 
 .TP
 \-\-apply
-If you use any of the options marked &#8220;Turns off "apply"&#8221; above, git\-apply reads and outputs the information you asked without actually applying the patch\&. Give this flag after those flags to also apply the patch\&.
+If you use any of the options marked “Turns off "apply"” above, git\-apply reads and outputs the information you asked without actually applying the patch\&. Give this flag after those flags to also apply the patch\&.
 
 .TP
 \-\-no\-add
@@ -83,6 +84,36 @@ When applying a patch, ignore additions made by the patch\&. This can be used to
 \-\-allow\-binary\-replacement
 When applying a patch, which is a git\-enhanced patch that was prepared to record the pre\- and post\-image object name in full, and the path being patched exactly matches the object the patch applies to (i\&.e\&. "index" line's pre\-image object name is what is in the working tree), and the post\-image object is available in the object database, use the post\-image object as the patch result\&. This allows binary files to be patched in a very limited way\&.
 
+.TP
+\-\-whitespace=<option>
+When applying a patch, detect a new or modified line that ends with trailing whitespaces (this includes a line that solely consists of whitespaces)\&. By default, the command outputs warning messages and applies the patch\&. When git\-apply is used for statistics and not applying a patch, it defaults to nowarn\&. You can use different <option> to control this behaviour:
+
+.RS
+.TP 3
+\(bu
+ nowarn turns off the trailing whitespace warning\&.
+.TP
+\(bu
+ warn outputs warnings for a few such errors, but applies the patch (default)\&.
+.TP
+\(bu
+ error outputs warnings for a few such errors, and refuses to apply the patch\&.
+.TP
+\(bu
+ error\-all is similar to error but shows all errors\&.
+.TP
+\(bu
+ strip outputs warnings for a few such errors, strips out the trailing whitespaces and applies the patch\&.
+.LP
+.RE
+.IP
+
+.SH "CONFIGURATION"
+
+.TP
+apply\&.whitespace
+When no \-\-whitespace flag is given from the command line, this configuration item is used as the default\&.
+
 .SH "AUTHOR"
 
 
diff --git a/man1/git-read-tree.1 b/man1/git-read-tree.1
index caa4af626..10a7c236a 100755
--- a/man1/git-read-tree.1
+++ b/man1/git-read-tree.1
@@ -23,12 +23,12 @@ git-read-tree \- Reads tree information into the index
 .SH "SYNOPSIS"
 
 
-git\-read\-tree (<tree\-ish> | [[\-m | \-\-reset] [\-u | \-i]] <tree\-ish1> [<tree\-ish2> [<tree\-ish3>]])
+\fIgit\-read\-tree\fR (<tree\-ish> | [[\-m [\-\-aggressive]| \-\-reset] [\-u | \-i]] <tree\-ish1> [<tree\-ish2> [<tree\-ish3>]])
 
 .SH "DESCRIPTION"
 
 
-Reads the tree information given by <tree\-ish> into the index, but does not actually update any of the files it "caches"\&. (see: \fBgit\-checkout\-index\fR(1))
+Reads the tree information given by <tree\-ish> into the index, but does not actually \fIupdate\fR any of the files it "caches"\&. (see: \fBgit\-checkout\-index\fR(1))
 
 
 Optionally, it can merge a tree into the index, perform a fast\-forward (i\&.e\&. 2\-way) merge, or a 3\-way merge, with the \-m flag\&. When used with \-m, the \-u flag causes it to also update the files in the work tree with the result of the merge\&.
@@ -54,6 +54,24 @@ After a successful merge, update the files in the work tree with the result of t
 \-i
 Usually a merge requires the index file as well as the files in the working tree are up to date with the current head commit, in order not to lose local changes\&. This flag disables the check with the working tree and is meant to be used when creating a merge of trees that are not directly related to the current working tree status into a temporary index file\&.
 
+.TP
+\-\-aggressive
+Usually a three\-way merge by git\-read\-tree resolves the merge for really trivial cases and leaves other cases unresolved in the index, so that Porcelains can implement different merge policies\&. This flag makes the command to resolve a few more cases internally:
+
+.RS
+.TP 3
+\(bu
+when one side removes a path and the other side leaves the path unmodified\&. The resolution is to remove that path\&.
+.TP
+\(bu
+when both sides remove a path\&. The resolution is to remove that path\&.
+.TP
+\(bu
+when both sides adds a path identically\&. The resolution is to add that path\&.
+.LP
+.RE
+.IP
+
 .TP
 <tree\-ish#>
 The id of the tree object(s) to be read/merged\&.
@@ -244,7 +262,7 @@ what you would commit is a pure merge between $JC and $LT without your work\-in\
 However, if you have local changes in the working tree that would be overwritten by this merge,git\-read\-tree will refuse to run to prevent your changes from being lost\&.
 
 
-In other words, there is no need to worry about what exists only in the working tree\&. When you have local changes in a part of the project that is not involved in the merge, your changes do not interfere with the merge, and are kept intact\&. When they do interfere, the merge does not even start (git\-read\-tree complains loudly and fails without modifying anything)\&. In such a case, you can simply continue doing what you were in the middle of doing, and when your working tree is ready (i\&.e\&. you have finished your work\-in\-progress), attempt the merge again\&.
+In other words, there is no need to worry about what exists only in the working tree\&. When you have local changes in a part of the project that is not involved in the merge, your changes do not interfere with the merge, and are kept intact\&. When they \fIdo\fR interfere, the merge does not even start (git\-read\-tree complains loudly and fails without modifying anything)\&. In such a case, you can simply continue doing what you were in the middle of doing, and when your working tree is ready (i\&.e\&. you have finished your work\-in\-progress), attempt the merge again\&.
 
 .SH "SEE ALSO"
 
diff --git a/man1/git-rev-list.1 b/man1/git-rev-list.1
index 175200a87..c8822ddb7 100755
--- a/man1/git-rev-list.1
+++ b/man1/git-rev-list.1
@@ -23,7 +23,7 @@ git-rev-list \- Lists commit objects in reverse chronological order
 .SH "SYNOPSIS"
 
 .nf
-git\-rev\-list [ \-\-max\-count=number ]
+\fIgit\-rev\-list\fR [ \-\-max\-count=number ]
              [ \-\-max\-age=timestamp ]
              [ \-\-min\-age=timestamp ]
              [ \-\-sparse ]
@@ -32,7 +32,7 @@ git\-rev\-list [ \-\-max\-count=number ]
              [ \-\-all ]
              [ [ \-\-merge\-order [ \-\-show\-breaks ] ] | [ \-\-topo\-order ] ]
              [ \-\-parents ]
-             [ \-\-objects [ \-\-unpacked ] ]
+             [ [\-\-objects | \-\-objects\-edge] [ \-\-unpacked ] ]
              [ \-\-pretty | \-\-header ]
              [ \-\-bisect ]
              <commit>... [ \-\- <paths>... ]
@@ -44,7 +44,7 @@ git\-rev\-list [ \-\-max\-count=number ]
 Lists commit objects in reverse chronological order starting at the given commit(s), taking ancestry relationship into account\&. This is useful to produce human\-readable log output\&.
 
 
-Commits which are stated with a preceding ^ cause listing to stop at that point\&. Their parents are implied\&. "git\-rev\-list foo bar ^baz" thus means "list all the commits which are included in foo and bar, but not in baz"\&.
+Commits which are stated with a preceding \fI^\fR cause listing to stop at that point\&. Their parents are implied\&. "git\-rev\-list foo bar ^baz" thus means "list all the commits which are included in \fIfoo\fR and \fIbar\fR, but not in \fIbaz\fR"\&.
 
 
 A special notation <commit1>\&.\&.<commit2> can be used as a short\-hand for ^<commit1> <commit2>\&.
@@ -61,7 +61,11 @@ Print the contents of the commit in raw\-format; each record is separated with a
 
 .TP
 \-\-objects
-Print the object IDs of any object referenced by the listed commits\&. git\-rev\-list \-\-objects foo ^bar thus means "send me all object IDs which I need to download if I have the commit object bar, but not foo"\&.
+Print the object IDs of any object referenced by the listed commits\&. \fIgit\-rev\-list \-\-objects foo ^bar\fR thus means "send me all object IDs which I need to download if I have the commit object \fIbar\fR, but not \fIfoo\fR"\&.
+
+.TP
+\-\-objects\-edge
+Similar to \-\-objects, but also print the IDs of excluded commits refixed with a \- character\&. This is used by git\-pack\-objects to build \fIthin\fR pack, which records objects in deltified form based on objects contained in these excluded commits to reduce network traffic\&.
 
 .TP
 \-\-unpacked
@@ -69,7 +73,7 @@ Only useful with \-\-objects; print the object IDs that are not in packs\&.
 
 .TP
 \-\-bisect
-Limit output to the one commit object which is roughly halfway between the included and excluded commits\&. Thus, if git\-rev\-list \-\-bisect foo bar baz outputs midpoint, the output of git\-rev\-list foo ^midpoint and git\-rev\-list midpoint bar baz would be of roughly the same length\&. Finding the change which introduces a regression is thus reduced to a binary search: repeatedly generate and test new 'midpoint's until the commit chain is of length one\&.
+Limit output to the one commit object which is roughly halfway between the included and excluded commits\&. Thus, if \fIgit\-rev\-list \-\-bisect foo bar baz\fR outputs \fImidpoint\fR, the output of \fIgit\-rev\-list foo ^midpoint\fR and \fIgit\-rev\-list midpoint bar baz\fR would be of roughly the same length\&. Finding the change which introduces a regression is thus reduced to a binary search: repeatedly generate and test new 'midpoint's until the commit chain is of length one\&.
 
 .TP
 \-\-max\-count
@@ -136,7 +140,7 @@ Commits marked with (^) are not parents of the immediately preceding commit\&. T
 Written by Linus Torvalds <torvalds@osdl\&.org>
 
 
-Original \-\-merge\-order logic by Jon Seymour <jon\&.seymour@gmail\&.com>
+Original \fI\-\-merge\-order\fR logic by Jon Seymour <jon\&.seymour@gmail\&.com>
 
 .SH "DOCUMENTATION"
 
-- 
2.26.2