Junio C Hamano [Tue, 23 Aug 2005 05:52:43 +0000 (22:52 -0700)]
[PATCH] Allow "+remote:local" refspec to cause --force when fetching.
With this we could say:
Pull: master:ko-master +pu:ko-pu
to mean "fast forward ko-master with master, overwrite ko-pu with pu",
and the latter one does not require the remote "pu" to be descendant
of local "ko-pu".
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 23 Aug 2005 04:57:59 +0000 (21:57 -0700)]
[PATCH] Use git-octopus when pulling more than one heads.
With this, you can finally say "git pull jgarzik sil24 pdc2027x".
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 23 Aug 2005 04:28:33 +0000 (21:28 -0700)]
[PATCH] "git fetch --force".
Just like "git push" can forcibly update a ref to a value that is not
a fast-forward, teach "git fetch" to do so as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 20 Aug 2005 10:05:42 +0000 (03:05 -0700)]
[PATCH] Use .git/remote/origin, not .git/branches/origin.
Now multi-head fetch is complete, let's migrate the
default configuration for new repositories created with
the "git clone" command.
The original $GIT_DIR/branches is not deprecated yet, but create
remotes directory by default from the templates as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 20 Aug 2005 10:00:03 +0000 (03:00 -0700)]
[PATCH] Make "git pull" and "git fetch" default to origin
Amos Waterland sent in a patch for the pre-multi-head aware
version of "git pull" to do this, but the code changed quite a
bit since then. If there is no argument given to pull from, and
if "origin" makes sense, default to fetch/pull from "origin"
instead of barfing.
[jc: besides, the patch by Amos broke the non-default case where
explicit refspecs are specified, and did not make sure we know
what "origin" means before defaulting to it.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 20 Aug 2005 09:58:42 +0000 (02:58 -0700)]
[PATCH] Infamous 'octopus merge'
This script uses the list of heads and their origin multi-head "git
fetch" left in the $GIT_DIR/FETCH_HEAD file, and makes an octopus
merge on top of the current HEAD using them.
The implementation tries to be strict for the sake of safety. It
insists that your working tree is clean (no local changes) and matches
the HEAD, and when any of the merged heads does not automerge, the
whole process is aborted and tries to rewind your working tree is to
the original state.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 20 Aug 2005 09:57:26 +0000 (02:57 -0700)]
[PATCH] Retire git-parse-remote.
Update git-pull to match updated git-fetch and allow pull to
fetch from multiple remote references. There is no support for
resolving more than two heads, which will be done with "git
octopus".
Update "git ls-remote" to use git-parse-remote-script.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 20 Aug 2005 09:54:34 +0000 (02:54 -0700)]
[PATCH] Multi-head fetch.
Traditionally, fetch takes these forms:
$ git fetch <remote>
$ git fetch <remote> <head>
$ git fetch <remote> tag <tag>
This patch updates it to take
$ git fetch <remote> <refspec>...
where:
- A <refspec> of form "<src>:<dst>" is to fetch the objects
needed for the remote ref that matches <src>, and if <dst>
is not empty, store it as a local <dst>.
- "tag" followed by <next> is just an old way of saying
"refs/tags/<next>:refs/tags/<next>"; this mimics the
current behaviour of the third form above and means "fetch
that tag and store it under the same name".
- A single token <refspec> without colon is a shorthand for
"<refspec>:" That is, "fetch that ref but do not store
anywhere".
- when there is no <refspec> specified
- if <remote> is the name of a file under $GIT_DIR/remotes/
(i.e. a new-style shorthand), then it is the same as giving
the <refspec>s listed on Pull: line in that file.
- if <remote> is the name of a file under $GIT_DIR/branches/
(i.e. an old-style shorthand, without trailing path), then it
is the same as giving a single <refspec>
"<remote-name>:refs/heads/<remote>" on the command line, where
<remote-name> is the remote branch name (defaults to HEAD, but
can be overridden by .git/branches/<remote> file having the
URL fragment notation). That is, "fetch that branch head and
store it in refs/heads/<remote>".
- otherwise, it is the same as giving a single <refspec>
that is "HEAD:".
The SHA1 object names of fetched refs are stored in FETCH_HEAD,
one name per line, with a comment to describe where it came from.
This is later used by "git resolve" and "git octopus".
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 20 Aug 2005 09:52:24 +0000 (02:52 -0700)]
[PATCH] Start adding the $GIT_DIR/remotes/ support.
All the necessary parsing code is in git-parse-remote-script;
update git-push-script to use it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Pavel Roskin [Wed, 24 Aug 2005 21:58:42 +0000 (17:58 -0400)]
[PATCH] Fix "prefix" mixup in git-rev-list
Recent changes in git have broken cg-log. git-rev-list no longer
prints "commit" in front of commit hashes. It turn out a local
"prefix" variable in main() shadows a file-scoped "prefix" variable.
The patch removed the local "prefix" variable since its value is never
used (in the intended way, that is). The call to
setup_git_directory() is kept since it has useful side effects.
The file-scoped "prefix" variable is renamed to "commit_prefix" just
in case someone reintroduces "prefix" to hold the return value of
setup_git_directory().
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 24 Aug 2005 21:31:36 +0000 (14:31 -0700)]
Audit rev-parse users again.
Some callers to rev-parse were using the output selection flags
inconsistently.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 24 Aug 2005 21:30:04 +0000 (14:30 -0700)]
Rationalize output selection in rev-parse.
Earlier rounds broke 'whatchanged -p'. In attempting to fix this,
make two axis of output selection in rev-parse orthogonal:
--revs-only tells it not to output things that are not revisions nor
flags that rev-list would take.
--no-revs tells it not to output things that are revisions or
flags that rev-list would take.
--flags tells it not to output parameters that do not start with
a '-'.
--no-flags tells it not to output parameters that starts with a '-'.
So for example 'rev-parse --no-revs -p arch/i386' would yield '-p arch/i386',
while 'rev-parse --no-revs --flags -p archi/i386' would give just '-p'.
Also the meaning of --verify has been made stronger. It now rejects
anything but a single valid rev argument. Earlier it passed some flags
through without complaining.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 24 Aug 2005 17:40:58 +0000 (10:40 -0700)]
Generate pack info file after repack.
Pulling from a packed repository over dumb transport without the
server info file fails, so run update-server-info automatically
after a repack by default. This can be disabled with the '-n'
flag.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 24 Aug 2005 04:18:49 +0000 (21:18 -0700)]
Link the tutorial from the main document.
And lead the reader to it at the beginning of the manual.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 24 Aug 2005 04:08:59 +0000 (21:08 -0700)]
Try to find the optimum merge base while resolving.
The merge-base command acquires a new option, '--all', that causes it
to output all the common ancestor candidates. The "git resolve"
command then uses it to pick the optimum merge base by picking the one
that results in the smallest number of nontrivial merges.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 23 Aug 2005 22:28:34 +0000 (15:28 -0700)]
Tutorial updates.
- Use "working tree", "object name", "repository" as the canonical
term consistenly.
- Start formatting tutorial with asciidoc.
- Mention shared repository style of cooperation.
- Update with some usability enhancements recently made, such as
the "-m" flag to the "git commit" command.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 23 Aug 2005 20:18:00 +0000 (13:18 -0700)]
Update git-diff-script.
This uses the fixed rev-parse to allow passing diff options to the
underlying diff command. For example:
$ git diff -r HEAD
shows the output in raw-diff format, and
$ git diff -p -R HEAD | git apply
generates a patch to go back from your working tree to HEAD commit
(i.e. an expensive way to say "git checkout -f HEAD").
At the same time, it accidentally removes the use of shell arrays.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Linus Torvalds [Tue, 23 Aug 2005 17:31:41 +0000 (10:31 -0700)]
Make "git-rev-list" work within subdirectories
This trivial patch makes "git-rev-list" able to handle not being in
the top-level directory. This magically also makes "git-whatchanged"
do the right thing.
Trivial scripting fix to make sure that "git log" also works.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Linus Torvalds [Tue, 23 Aug 2005 17:47:54 +0000 (10:47 -0700)]
[PATCH] Fix git-rev-parse --default and --flags handling
This makes the argument to --default and any --flags arguments should up
correctly, and makes "--" together with --flags act sanely.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 23 Aug 2005 08:49:47 +0000 (01:49 -0700)]
Add placeholders for missing documents.
The text does not say anything interesting, but at least the
author list should reflect something close to reality.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 23 Aug 2005 00:55:26 +0000 (17:55 -0700)]
Introduce "reset type" flag to "git reset"
I have been feeling that the current behaviour of "git reset" is
not quite optimal, but so far could not express exactly what I
felt was wrong with it. This patch clarifies it.
There are at least two situations you may want to "reset" your
working tree.
1. You made a mess in your working tree. You want to switch
back to a known good state and start over. This mess may be
a result of your own editing, a merge that had too many
conflicting changes that you do not feel like to resolve by
hand at this moment, or a botched application of a patch you
received from somewhere.
In this case, you would want to have "git reset HEAD" reset
the index file to the tree read from the HEAD commit and the
files in the working tree to match index (i.e. "git status"
should say "Nothing to commit", without any "unrecorded
changes").
The current behaviour leaves the files in the working tree
intact, which requires you to run "git checkout -f". Also
you need to remember "rm -f" any files that the botched patch
may have left in the working tree if the purpose of this
"reset" is to attempt to apply it again; most likely the
patch would fail if such a file is left behind.
2. You have discovered that commits you made earlier need to be
reorganized. The simplest example is to undo the last
commit, re-edit some files, and redo the commit. Another
simple eample is to undo the last two commits, and commit the
changes in those two commits as a single commit.
In this case, you would want to have "git reset HEAD^" reset
the $GIT_DIR/HEAD to the commit object name of the parent
commit of the current commit (i.e. rewinding one commit),
leave the index file and the files in the working tree in a
state where you can easily make a commit that records a tree
that resembles what you have in the current index file and
the working tree.
The current behaviour is almost OK for this purpose, except
that you need to find which files you need to manually run
"git add" yourself. They are files that are in the original
HEAD commit and not in the commit you are resetting to.
The default without the type flag is to do "--mixed", which is
the current behaviour.
$ git reset [ --hard | --soft | --mixed ] [ <commit-ish> ]
A hard reset would be used for 1 and works in this way:
(1) remember the set of paths that appear in the current
index file (which may even have unmerged entries) and
the current $GIT_DIR/HEAD commit.
(2) "read-tree --reset" the specified <commit-ish> (default
to HEAD), followed by "checkout-cache -f -u -a".
(3) remove any files that appear in (1) but not in
<commit-ish> from the working tree.
(4) backup $GIT_DIR/HEAD to $GIT_DIR/ORIG_HEAD and update
$GIT_DIR/HEAD with the specified <commit-ish>.
(5) remove leftover $GIT_DIR/MERGE_HEAD
A soft reset would be used for 2 and works in this way:
(1) Make sure that the index file is merged and we do not
have MERGE_HEAD; otherwise it does not make sense to do
soft reset.
(2) backup $GIT_DIR/HEAD to $GIT_DIR/ORIG_HEAD and update
$GIT_DIR/HEAD with the specified <commit-ish>.
Note that with the current behaviour, "git diff" is the way to
see what could be committed immediately after "git reset". With
the "soft reset" described here you would need to say "git diff
HEAD" to find that out.
I am not sure what mixed reset (the current behaviour) is good
for. If nobody comes up with a good use case it may not be a
bad idea to remove it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 23 Aug 2005 06:16:46 +0000 (23:16 -0700)]
Clean-up output from "git show-branch" and document it.
When showing only one branch a lot of default output becomes redundant,
so clean it up a bit, and document what is shown. Retire the earlier
implementation "git-show-branches-script".
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sun, 21 Aug 2005 09:51:10 +0000 (02:51 -0700)]
[PATCH] Add 'git show-branch'.
The 'git show-branches' command turns out to be reasonably useful,
but painfully slow. So rewrite it in C, using ideas from merge-base
while enhancing it a bit more.
- Unlike show-branches, it can take --heads (show me all my
heads), --tags (show me all my tags), or --all (both).
- It can take --more=<number> to show beyond the merge-base.
- It shows the short name for each commit in the extended SHA1
syntax.
- It can find merge-base for more than two heads.
Examples:
$ git show-branch --more=6 HEAD
is almost the same as "git log --pretty=oneline --max-count=6".
$ git show-branch --merge-base master mhf misc
finds the merge base of the three given heads.
$ git show-branch master mhf misc
shows logs from the top of these three branch heads, up to their
common ancestor commit is shown.
$ git show-branch --all --more=10
is poor-man's gitk, showing all the tags and heads, and
going back 10 commits beyond the merge base of those refs.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sun, 21 Aug 2005 09:43:54 +0000 (02:43 -0700)]
[PATCH] Add a new extended SHA1 syntax <name>~<num>
The new notation is a short-hand for <name> followed by <num>
caret ('^') characters. E.g. "master~4" is the fourth
generation ancestor of the current "master" branch head,
following the first parents; same as "master^^^^" but a bit
more readable.
This will be used in the updated "git show-branch" command.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sun, 21 Aug 2005 20:56:52 +0000 (13:56 -0700)]
Fix "git-diff-script A B"
When "git-diff-script A..B" notation was introduced, it ended up breaking
the traditional two revisions notation.
[jc: there are other issues with the current "git diff" I would like to
address, but they would be left to later rounds. For example, -M and -p flags
should not be hardcoded default, and it shouldn't be too hard to rewrite
the script without using shell arrays.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
Linus Torvalds [Mon, 22 Aug 2005 00:27:50 +0000 (17:27 -0700)]
[PATCH] git-ls-files: generalized pathspecs
This generalizes the git "glob" string to be a lot more like the
git-diff-* pathspecs (but there are still differences: the diff family
doesn't do any globbing, and because the diff family always generates the
full native pathname, it doesn't have the issue with "..").
It does three things:
- it allows multiple matching strings, ie you can do things like
git-ls-files arch/i386/ include/asm-i386/ | xargs grep pattern
- the "matching" criteria is a combination of "exact path component
match" (the same as the git-diff-* family), and "fnmatch()". However,
you should be careful with the confusion between the git-ls-files
internal globbing and the standard shell globbing, ie
git-ls-files fs/*.c
does globbing in the shell, and does something totally different from
git-ls-files 'fs/*.c'
which does the globbing inside git-ls-files.
The latter has _one_ pathspec with a wildcard, and will match any .c
file anywhere under the fs/ directory, while the former has been
expanded by the shell into having _lots_ of pathspec entries, all of
which are just in the top-level fs/ subdirectory. They will happily
be matched exactly, but we will thus miss all the subdirectories under
fs/.
As a result, the first one will (on the current kernel) match 55 files,
while the second one will match 664 files!
- it uses the generic path prefixing, so that ".." and friends at the
beginning of the path spec work automatically
NOTE! When generating relative pathname output (the default), a
pathspec that causes the base to be outside the current working
directory will be rejected with an error message like:
fatal: git-ls-files: cannot generate relative filenames containing '..'
because we do not actually generate ".." in the output. However, the
".." format works fine for the --full-name case:
cd arch/i386/kernel
git-ls-files --full-name ../mm/
results in
arch/i386/mm/Makefile
arch/i386/mm/boot_ioremap.c
arch/i386/mm/discontig.c
arch/i386/mm/extable.c
arch/i386/mm/fault.c
arch/i386/mm/highmem.c
arch/i386/mm/hugetlbpage.c
arch/i386/mm/init.c
arch/i386/mm/ioremap.c
arch/i386/mm/mmap.c
arch/i386/mm/pageattr.c
arch/i386/mm/pgtable.c
Perhaps more commonly, the generic path prefixing means that "." and
"./" automatically get simplified and work properly.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Linus Torvalds [Sun, 21 Aug 2005 19:55:33 +0000 (12:55 -0700)]
[PATCH] Make "git-ls-files" work in subdirectories
This makes git-ls-files work inside a relative directory, and also adds
some rudimentary filename globbing support. For example, in the kernel you
can now do
cd arch/i386
git-ls-files
and it will show all files under that subdirectory (and it will have
removed the "arch/i386/" prefix unless you give it the "--full-name"
option, so that you can feed the result to "xargs grep" or similar).
The filename globbing is kind of strange: it does _not_ follow normal
globbing rules, although it does look "almost" like a normal file glob
(and it uses the POSIX.2 "fnmatch()" function).
The glob pattern (there can be only one) is always split into a "directory
part" and a "glob part", where the directory part is defined as any full
directory path without any '*' or '?' characters. The "glob" part is
whatever is left over.
For example, when doing
git-ls-files 'arch/i386/p*/*.c'
the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c".
The directory part will be added to the prefix, and handled efficiently
(ie we will not be searching outside of that subdirectory), while the glob
part (if anything is left over) will be used to trigger "fnmatch()"
matches.
This is efficient and very useful, but can result in somewhat
non-intuitive behaviour.
For example:
git-ls-files 'arch/i386/*.[ch]'
will find all .c and .h files under arch/i386/, _including_ things in
lower subdirectories (ie it will match "arch/i386/kernel/process.c",
because "kernel/process.c" will match the "*.c" specifier).
Also, while
git-ls-files arch/i386/
will show all files under that subdirectory, doing the same without the
final slash would try to show the file "i386" under the "arch/"
subdirectory, and since there is no such file (even if there is such a
_directory_) it will not match anything at all.
These semantics may not seem intuitive, but they are actually very
practical. In particular, it makes it very simple to do
git-ls-files fs/*.c | xargs grep some_pattern
and it does what you want.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sun, 21 Aug 2005 09:43:08 +0000 (02:43 -0700)]
[PATCH] sha1_name: do not accept .git/refs/snap/.
I think Linus did a cut & paste from an early JIT code while
developing the current extended SHA1 notation, and left it there as a
courtesy, but the directory does not deserve to be treated any more
specially than, say, .git/refs/bisect.
If the subdirectories under .git/refs proliferate, we may want to
switch to scanning that hierarchy at runtime, instead of the current
hard-coded set, although I think that would be overkill.
Signed-off-by: Junio C Hamano <junkio@cox.net>
From nobody Mon Sep 17 00:00:00 2001
Subject: [PATCH] Add a new extended SHA1 syntax <name>:<num>
From: Junio C Hamano <junkio@cox.net>
Date:
1124617434 -0700
The new notation is a short-hand for <name> followed by <num>
caret ('^') characters. E.g. "master:4" is the fourth
generation ancestor of the current "master" branch head,
following the first parents; same as "master^^^^" but a bit more
readable.
This will be used in the updated "git show-branch" command.
Signed-off-by: Junio C Hamano <junkio@cox.net>
---
sha1_name.c | 41 +++++++++++++++++++++++++++++++++++++++++
1 files changed, 41 insertions(+), 0 deletions(-)
d5098ce769da46df6d45dc8f41b06dd758fdaea7
diff --git a/sha1_name.c b/sha1_name.c
--- a/sha1_name.c
+++ b/sha1_name.c
@@ -191,9 +191,29 @@ static int get_parent(const char *name,
return -1;
}
+static int get_nth_ancestor(const char *name, int len,
+ unsigned char *result, int generation)
+{
+ unsigned char sha1[20];
+ int ret = get_sha1_1(name, len, sha1);
+ if (ret)
+ return ret;
+
+ while (generation--) {
+ struct commit *commit = lookup_commit_reference(sha1);
+
+ if (!commit || parse_commit(commit) || !commit->parents)
+ return -1;
+ memcpy(sha1, commit->parents->item->object.sha1, 20);
+ }
+ memcpy(result, sha1, 20);
+ return 0;
+}
+
static int get_sha1_1(const char *name, int len, unsigned char *sha1)
{
int parent, ret;
+ const char *cp;
/* foo^[0-9] or foo^ (== foo^1); we do not do more than 9 parents. */
if (len > 2 && name[len-2] == '^' &&
@@ -210,6 +230,27 @@ static int get_sha1_1(const char *name,
if (parent >= 0)
return get_parent(name, len, sha1, parent);
+ /* name:3 is name^^^,
+ * name:12 is name^^^^^^^^^^^^, and
+ * name: is name
+ */
+ parent = 0;
+ for (cp = name + len - 1; name <= cp; cp--) {
+ int ch = *cp;
+ if ('0' <= ch && ch <= '9')
+ continue;
+ if (ch != ':')
+ parent = -1;
+ break;
+ }
+ if (!parent && *cp == ':') {
+ int len1 = cp - name;
+ cp++;
+ while (cp < name + len)
+ parent = parent * 10 + *cp++ - '0';
+ return get_nth_ancestor(name, len1, sha1, parent);
+ }
+
ret = get_sha1_basic(name, len, sha1);
if (!ret)
return 0;
Yasushi SHOJI [Sun, 21 Aug 2005 07:14:16 +0000 (16:14 +0900)]
[PATCH] possible memory leak in diff.c::diff_free_filepair()
Here is a patch to fix the problem in the simplest way.
Junio C Hamano [Sat, 20 Aug 2005 09:05:31 +0000 (02:05 -0700)]
Create objects/info/ directory in init-db.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Marco Costalba [Sat, 20 Aug 2005 16:02:16 +0000 (18:02 +0200)]
[PATCH] Fix git-commit-script to output on stderr when -v fails
When git-commit-script is called with -v option and
verify test fails result is print on stdout
instead of stderr.
[jc: The original patch from Marco updated git-commit-script that
still had the piece of code in question, which has been moved to
an example hook script on its own, so I transplanted the patch to
that new file instead.]
Signed-off-by: Marco Costalba <mcostalba@yahoo.it>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 20 Aug 2005 08:21:21 +0000 (01:21 -0700)]
git-resolve: dying is good, not showing help is bad.
Recent change to make sure we get commit, not tag, accidentally
removed its feature of giving a usage help message when it died.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 20 Aug 2005 08:05:12 +0000 (01:05 -0700)]
Make sample pre-commit hook output Emacs friendly.
Use the common error message format, "filename:lineno: body";
this way, problematic lines can be jumped to from the Emacs
compilation buffer by C-x `.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 20 Aug 2005 04:38:36 +0000 (21:38 -0700)]
Call prune-packed from "git prune" as well.
Add -n (dryrun) flag to git-prune-packed, and call it from "git prune".
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Fri, 19 Aug 2005 20:53:13 +0000 (13:53 -0700)]
Add hooks to tools/git-applypatch.
This teachs git-applypatch, which is used from git-applymbox, three
hooks, similar to what git-commit-script uses.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Fri, 19 Aug 2005 00:20:08 +0000 (17:20 -0700)]
Add commit hook and make the verification customizable.
There are three hooks:
- 'pre-commit' is given an opportunity to inspect what is
being committed, before we invoke the EDITOR for the
commit message;
- 'commit-msg' is invoked on the commit log message after
the user prepares it;
- 'post-commit' is run after a successful commit is made.
The first two can interfere to stop the commit. The last one is
for after-the-fact notification.
The earlier built-in commit checker is now moved to pre-commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Thu, 18 Aug 2005 07:59:37 +0000 (00:59 -0700)]
[PATCH] Allow file removal when "git commit --all" is used.
After you deleted files from your working tree, automatic
git-update-cache used when the "--all" flag is given to "git
commit" barfs because it lacks the --remove flag.
It can be argued that this is a feature; people should be
careful and something with a grave consequence like removing
files should be done manually, in which case the current
behaviour may be OK.
The patch is for people who thinks the user who uses the "--all"
flag deserves the danger that comes with the convenience.
Comments?
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Fri, 19 Aug 2005 23:15:59 +0000 (16:15 -0700)]
Merge from gitk
Sergey Vlasov [Fri, 19 Aug 2005 18:28:35 +0000 (22:28 +0400)]
[PATCH] git-rev-list: avoid crash on broken repository
When following tags, check for parse_object() success and error out
properly instead of segfaulting.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Marco Costalba [Fri, 19 Aug 2005 10:35:03 +0000 (12:35 +0200)]
[PATCH] Fix git-format-patch-script to handle empty messages
In case of a commit with an empty message there is no
mandatory empty line between headers and body
[jc: This makes --mbox output valid even when the commit message does
not have anything but its first line, which the one I wrote botched.
One side-effect is that it adds an extra blank line at the end even if
it has more than one lines, which will be eaten by the receiving end.
As Marco says, this is a stop-gap measure. This script needs to be
split into two, one that gets the format specifier and a commit ID to
write to its standard output, and another that drives that one reading
from rev-list. I'll fix things properly when that happens by
rewriting the former part in Perl or something more reasonable than
the current shell, sed and grep mishmash.]
Signed-off-by: Marco Costalba <mcostalba@yahoo.it>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Paul Mackerras [Fri, 19 Aug 2005 13:11:39 +0000 (23:11 +1000)]
Display the contents of a tag when the user clicks on it.
This just displays the result of git-cat-file on the tag in the
details pane. If the tag is a "direct" tag (the tag file contains
the SHA1 ID of a commit rather than a tag), we show the tag name
and SHA1 ID.
Paul Mackerras [Fri, 19 Aug 2005 12:14:28 +0000 (22:14 +1000)]
Added re-read refs command, and display all refs.
These are features requested by Junio. Any plain file under .git/refs
whose contents start with 40 hex characters is taken as a reference
and displayed like a head but with a light blue background (unless it
is in .git/refs/tags or .git/refs/heads, in which case it is displayed
as before). There is now a "Reread references" menu item in the File
menu which re-reads all the plain files under .git/refs and redisplays
any references that have changed.
Junio C Hamano [Fri, 19 Aug 2005 09:06:52 +0000 (02:06 -0700)]
Fix __attribute__ changes.
It cannot be checked with #ifndef, if you really think about what it
does which cannot be done only with the preprocessor. My thinko.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jason Riedy [Fri, 19 Aug 2005 04:10:08 +0000 (21:10 -0700)]
[PATCH] Spell __attribute__ correctly in cache.h.
Sun's cc doesn't know __attribute__.
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Paul Mackerras [Fri, 19 Aug 2005 00:22:24 +0000 (10:22 +1000)]
Save the maxwidth setting in the ~/.gitk file.
Paul Mackerras [Fri, 19 Aug 2005 00:22:04 +0000 (10:22 +1000)]
Fix a bug where commits with no children weren't marked as on-screen.
This problem was revealed by running gitk --all on Wolfgang Denk's
u-boot repository.
Junio C Hamano [Thu, 18 Aug 2005 23:30:36 +0000 (16:30 -0700)]
Also make git-rebase-script stricter about dirty working tree.
Otherwise the first commit rebase makes could include whatever
dirty state the original working tree had.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Linus Torvalds [Thu, 18 Aug 2005 22:31:40 +0000 (15:31 -0700)]
[PATCH] git-applymbox: verify that index is clean
This makes git-applymbox verify that the index matches the current HEAD
before it starts applying patches.
Otherwise, you might have updated the index with unrelated changes, and
the first patch will commit not just the patch from the mbox, but also any
changes you had in your index.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Thu, 18 Aug 2005 22:52:58 +0000 (15:52 -0700)]
Link the glossary document from the main manual.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Thu, 18 Aug 2005 20:00:53 +0000 (13:00 -0700)]
Stupid typo fix for git rebase.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Johannes Schindelin [Thu, 18 Aug 2005 19:17:47 +0000 (21:17 +0200)]
[PATCH] Updates to glossary
Changes to the descriptions of tree and tag objects, a link for ent, and
descriptions for rewind, rebase and core git were added.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Thu, 18 Aug 2005 19:18:27 +0000 (12:18 -0700)]
Merge with gitk --parents change.
Luck, Tony [Thu, 18 Aug 2005 16:42:56 +0000 (09:42 -0700)]
[PATCH] updates for Documentation/howto/using-topic-branches.txt
Small fix (use "git branch" to make branches, rather than "git checkout -b").
Optimization for trivial patches (apply to release and merge to test).
Three sample scripts appended.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Johannes Schindelin [Thu, 18 Aug 2005 15:28:57 +0000 (17:28 +0200)]
[PATCH] Add Makefile target glossary.html
This also includes a script which does the sorting, and introduces
hyperlinks for every described term.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Paul Mackerras [Thu, 18 Aug 2005 10:40:39 +0000 (20:40 +1000)]
Use the --parents flag to git-rev-list.
With --parents, git-rev-list gives us the list of parents on the
first line of each commit. We use that rather than looking for
the parent: lines in the commit body, since this way we get to
know about the grafts for free.
Junio C Hamano [Thu, 18 Aug 2005 04:09:15 +0000 (21:09 -0700)]
Merge with gitk
Johannes Schindelin [Thu, 18 Aug 2005 01:20:08 +0000 (03:20 +0200)]
[PATCH] Assorted changes to glossary
Based on the discussion on the git list, here are some important changes
to the glossary. (There is no cache, but an index. Use "object name"
rather than "SHA1". Reorder. Clarify.)
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Paul Mackerras [Wed, 17 Aug 2005 23:30:10 +0000 (09:30 +1000)]
Allow graph lines to jump through hyperspace.
When the graph gets too wide (as defined by the maxwidth variable,
which can be set in ~/.gitk), we can now terminate graph lines with
an arrow pointing downwards, and reintroduce them later with an
arrow pointing upwards when we need them. This makes the graph much
less cluttered on large repositories such as the linux kernel.
Unfortunately this has made it slower; it takes about 10 seconds
user time on the linux-2.6 repository on my machine now, compared
to 6 seconds before. I'll have to work on optimizing that. Also
on the todo list are making the arrow heads active (so if you click
on them you jump to the other end) and improving the placement of
the null entry.
Junio C Hamano [Wed, 17 Aug 2005 22:19:57 +0000 (15:19 -0700)]
Make rebase script saner.
It did not check to see if the working tree was clean and matched
the commit we were starting out as, resulting in the initial rebased
commit including whatever dirty state the working tree has had.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 17 Aug 2005 22:18:41 +0000 (15:18 -0700)]
Make sure alternates are carried over from the original repository.
When we create a cheap local clone by pointing at the object databse
of the original repository, we forgot to take the alternates the original
repository might have had into account.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 17 Aug 2005 22:17:03 +0000 (15:17 -0700)]
Fix git-commit without paths.
The earlier one to grab output from diff-files --name-only has a grave
bug that when no paths are given it ended up doing the equivalent of
"git-commit --all", which was not what I intended.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Linus Torvalds [Wed, 17 Aug 2005 20:32:22 +0000 (13:32 -0700)]
[PATCH] Make git-update-cache take relative pathnames
This also makes "./filename" acceptable as a side effect, since the
pathname normalization handles that too.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Linus Torvalds [Wed, 17 Aug 2005 20:31:49 +0000 (13:31 -0700)]
[PATCH] Export relative path handling "prefix_path()" function
Not all programs necessarily have a pathspec array of pathnames, some of
them (like git-update-cache) want to do things one file at a time. So
export the single-path interface too.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Martin Langhoff [Tue, 16 Aug 2005 21:27:09 +0000 (09:27 +1200)]
[PATCH] git-cvsimport - remove hardcoded reference to origin
... in the newly introduced merge detection code.
Signed-off-by: Martin Langhoff <martin.langhoff@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Martin Langhoff [Tue, 16 Aug 2005 10:35:27 +0000 (22:35 +1200)]
[PATCH] Add merge detection to git-cvsimport
Added -m and -M flags for git-cvsimport to detect merge commits in cvs.
While this trusts the commit message, in repositories where merge commits
indicate 'merged from FOOBRANCH' the import works surprisingly well.
Even if some merges from CVS are bogus or incomplete, the resulting
branches are in better state to go forward (and merge) than without any
merge detection.
Signed-off-by: Martin Langhoff <martin.langhoff@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Johannes Schindelin [Wed, 17 Aug 2005 14:56:48 +0000 (16:56 +0200)]
[PATCH] Add GIT glossary
[jc: This is the version without asciidoc cross references;
Johannes says that the cross referenced one is generated from
this file using a Perl script, so I am placing this as the
source, and expecting to later receive the script and a Makefile
entry or two to massage this file into the final HTML or
whatever form.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Marco Costalba [Wed, 17 Aug 2005 12:17:27 +0000 (05:17 -0700)]
[PATCH] Let git-format-patch-script write on stdout
Avoid that git-format-patch writes out patch series
information on stderr when there are no errors
Signed-off-by: Marco Costalba <mcostalba@yahoo.it>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Kris Shannon [Wed, 17 Aug 2005 03:02:16 +0000 (13:02 +1000)]
[PATCH] Be consistent in naming of remote heads
The _remote_name variable used for messages does not need the
refs/heads/ prefix included.
Signed-off-by: Kris Shannon <kris.shannon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Greg Louis [Wed, 17 Aug 2005 16:37:04 +0000 (12:37 -0400)]
[PATCH] use it's and its correctly in documentation
At one place in Documentation/tutorial.txt and several in the base
README, its was wrongly used in place of it's or vice versa. One
instance remains somewhere in Documentation/howto/, which I didn't
correct because it's in a quotation.
Signed-off-by: Greg Louis <glouis@dynamicro.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Johannes Schindelin [Wed, 17 Aug 2005 09:19:20 +0000 (11:19 +0200)]
[PATCH] Also handle CVS branches with a '/' in their name
I track a CVS project which has a branch with a '/' in the branch name.
Since git wants the branch name to be a file name at the same time,
substitute that character to a '-' by default (override with "-s <subst>").
This should work well, despite the fact that a division and a difference
are completely different :-)
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Johannes Schindelin [Wed, 17 Aug 2005 07:01:07 +0000 (09:01 +0200)]
[PATCH] When copying or renaming, keep the mode, please
Without this patch, git-apply does not retain the mode when renaming or
copying files.
[jc: Good catch, Johannes. I added a test case to demonstrate the
breackage in the original.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Kalle Valo [Tue, 16 Aug 2005 17:58:10 +0000 (20:58 +0300)]
[PATCH] Change git-branch to list branches
If no argument provided to `git branch`, show available branches and
mark current branch with star.
This is based on patch written by Amos Waterland <apw@rossby.metr.ou.edu>.
[jc: and I changed it to handle subdirectories under refs/heads/ as well.]
Signed-off-by: Kalle Valo <Kalle.Valo@iki.fi>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 17 Aug 2005 01:08:19 +0000 (18:08 -0700)]
git-commit: pass explicit path to git-diff-files.
When running "git commit" with explicit path arguments, allow it to
take directory name. This makes "git commit Documentation/" to commit
everything that is changed under Documentation/ directory.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 16 Aug 2005 20:01:39 +0000 (13:01 -0700)]
Pass options to underlying git-rev-list from show-branches.
This lets you say "git show-branches --max-count=30".
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 16 Aug 2005 19:36:46 +0000 (12:36 -0700)]
Add --symbolic flag to git-rev-parse.
This is most useful with --all, --revs-only, --no-flags and --verify.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Paul Mackerras [Wed, 17 Aug 2005 11:27:55 +0000 (21:27 +1000)]
Add graft support.
We read .git/info/grafts and use the information in there to
override the list of parents we get from git-rev-list or
git-cat-file.
Junio C Hamano [Wed, 17 Aug 2005 05:18:27 +0000 (22:18 -0700)]
Teach applymbox to keep the Subject: line.
This corresponds to the -k flag to git format-patch --mbox
option. The option should probably not be used when applying a
real e-mail patch, but is needed when format-patch and applymbox
pair is used for cherrypicking.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 17 Aug 2005 01:22:05 +0000 (18:22 -0700)]
Use LF and allow comments in objects/info/alternates file.
Yes, using the same format for the file and the environment variable
was a big mistake. This uses LF as the path separator, and allows
lines that begin with '#' to be comments. ':' is no longer a separator
in objects/info/alternates file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 16 Aug 2005 22:23:50 +0000 (15:23 -0700)]
git-format-patch fixes.
Introduces --keep-subjects flag to tell it not to munge the
first line of the commit message. Running "git applymbox" on
the output from "git format-patch -m -k" would preserve the
original commit information better this way.
At the same time, prefix Subject: on the first line of the
commit, to help people cut©.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Linus Torvalds [Wed, 17 Aug 2005 03:44:32 +0000 (20:44 -0700)]
[PATCH] Improve handling of "." and ".." in git-diff-*
This fixes up usage of ".." (without an ending slash) and "." (with or
without the ending slash) in the git diff family.
It also fixes pathspec matching for the case of an empty pathspec, since a
"." in the top-level directory (or enough ".." under subdirectories) will
result in an empty pathspec. We used to not match it against anything, but
it should in fact match everything.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Linus Torvalds [Wed, 17 Aug 2005 02:50:37 +0000 (19:50 -0700)]
[PATCH] Fix test failure due to overly strict .git directory tests
We may not actually have a valid HEAD at all times, so relax the validity
tests for a .git subdirectory accordingly.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Linus Torvalds [Wed, 17 Aug 2005 01:06:34 +0000 (18:06 -0700)]
[PATCH] Make "git diff" work inside relative subdirectories
We always show the diff as an absolute path, but pathnames to diff are
taken relative to the current working directory (and if no pathnames are
given, the default ends up being all of the current working directory).
Note that "../xyz" also works, so you can do
cd linux/drivers/char
git diff ../block
and it will generate a diff of the linux/drivers/block changes.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 17 Aug 2005 00:41:32 +0000 (17:41 -0700)]
[PATCH] Add a bit more links to the commands to the main git(7) page.
There are many programs like git-add not described at all, and the
organization of the list of commands may be suboptimal, but we have to
start somewhere.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 17 Aug 2005 00:24:34 +0000 (17:24 -0700)]
[PATCH] Reformat git-show-branches-script documentation.
... using ListingBlock of asciidoc.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Matt Draisey [Tue, 16 Aug 2005 05:46:34 +0000 (01:46 -0400)]
[PATCH] Make do_each_ref() follow symlinks.
Because there is no reason not to, and this makes things a bit
safer when running "git prune".
[jc: I do not necessarily agree with the reasoning of the
original author that it is a good way to keep "git prune" from
stomping on objects to have a symlink that points at .git/refs
of the repository A in the .git/refs of the repository B when
repository A borrows object database from repository B. For one
thing, the object database that everybody borrows objects from
may not even have its own .git/refs hierarchy. Come to think of
it, maybe we should disallow symlink inside .git/refs hierarchy;
we update the files there by creat/rename pair, so having
symlinks would not work anyway when you do anything that would
update them.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
Martin Langhoff [Tue, 16 Aug 2005 05:39:29 +0000 (17:39 +1200)]
[PATCH] Add -k kill keyword expansion option to git-cvsimport - revised
Early versions of git-cvsimport defaulted to using preexisting keyword
expansion settings. This change preserves compatibility with existing cvs
imports and allows new repository migrations to kill keyword expansion.
After exploration of the different -k modes in the cvs protocol, we use -kk
which kills keyword expansion wherever possible. Against the protocol
spec, -ko and -kb will sometimes expand keywords.
Should improve our chances of detecting merges and reduce imported
repository size.
Signed-off: Martin Langhoff <martin.langhoff@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 16 Aug 2005 05:48:09 +0000 (22:48 -0700)]
[PATCH] Fix local pull that uses packs.
The patch mixed up the sha1 for the object being pulled, and the
sha1 the pull engine internally use to represent the name of the
pack that contains the object being pulled.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Daniel Barkalow [Tue, 16 Aug 2005 04:10:32 +0000 (00:10 -0400)]
[PATCH] Support packs in local-pull
If it doesn't find an object, it looks for an index that contains it
and uses the same methods on that instead.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Daniel Barkalow [Tue, 16 Aug 2005 04:10:03 +0000 (00:10 -0400)]
[PATCH] Add function to read an index file from an arbitrary filename.
Note that the pack file has to be in the usual location if it gets
installed later.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
iso-8859-1?Q?David_K=E5gedal [Mon, 15 Aug 2005 18:18:25 +0000 (20:18 +0200)]
[PATCH] Fixed two bugs in git-cvsimport-script.
The git-cvsimport-script had a copule of small bugs that prevented me
from importing a big CVS repository.
The first was that it didn't handle removed files with a multi-digit
primary revision number.
The second was that it was asking the CVS server for "F" messages,
although they were not handled.
I also updated the documentation for that script to correspond to
actual flags.
Signed-off-by: David K?5gedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Matthias Urlichs [Mon, 15 Aug 2005 09:28:19 +0000 (11:28 +0200)]
[PATCH] cvsgit fixes: spaces in filenames and CVS server dialog woes
Problems found while importing dasher's CVS:
* Allow spaces in filenames.
* cvsps may create unnamed branches with revisions that don't really
exist, which causes the CVS server to return something we haven't
hitherto expected.
* Report deleted files when being verbose.
* Also, report the commit date.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Chris Wright [Tue, 16 Aug 2005 18:28:02 +0000 (11:28 -0700)]
Make tools use DESTDIR as well (otherwise rpm build is broken).
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Johannes Schindelin [Tue, 16 Aug 2005 00:20:34 +0000 (02:20 +0200)]
[PATCH] Make git-format-patch's signoff option more consistent
Since git-commit-script has a "--signoff" option, use that in
git-format-patch-script, too (and since partial option names are
supported,"--sign" is still valid).
Also, if the message already contains the S-O-B line, silently ignore the
"--signoff" request.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 15 Aug 2005 22:37:37 +0000 (15:37 -0700)]
Tentative fix to git-commit-script
The recent change to give the multiple commit message source was not
carrying over the authorship information from -C/-c commits correctly.
The export of the environment variable happens only in the subprocess,
not the main process that eventually runs git-commit-tree.
The right fix might be to teach git-commit-script to grok the From:
and Date: lines at the beginning of the commit message just like
git-applymbox knows how, but this has to do until that enhancement
happens.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 15 Aug 2005 22:48:47 +0000 (15:48 -0700)]
[PATCH] Add documentation for git repack and git-prune-packed.
[jc: the patch forgot to update the main git.txt documentation,
making all these new documentation practically no-op, so I added
a minimum attempt linking them from there.]
Signed-off-by: Ryan Anderson <ryan@michonline.com>
Junio C Hamano [Mon, 15 Aug 2005 22:37:37 +0000 (15:37 -0700)]
[PATCH] clean up git script
Makes git work with a pure POSIX shell (tested with bash --posix and ash).
Right now git causes ash to choke on the redundant shift on line two.
Reduces the number of system calls git makes just to do a usage
statement from 22610 to 1122, and the runtime for same from 349ms to
29ms on my x86 Linux box.
Presents a standard usage statement, and pretty prints the available
commands in a form that does not scroll off small terminals.
[jc: while shifting when $# was zero was a bug, the original
patch failed to shift when it needs to, which I fixed up.]
Signed-off-by: Amos Waterland <apw@rossby.metr.ou.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 15 Aug 2005 22:37:37 +0000 (15:37 -0700)]
Audit rev-parse users.
Make sure that we say --verify when we want to get a single SHA1
name. Also when we say --verify, --revs-only is redundant.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 15 Aug 2005 22:36:52 +0000 (15:36 -0700)]
Keep excellent tutorial for using topic branches by Tony Luck
I would eventually like to move this to become a part of the tutorial,
but anyway, this was an excellent post that describes how topic
branches can be used to keep track of local changes.
Yasushi SHOJI [Mon, 15 Aug 2005 15:23:06 +0000 (00:23 +0900)]
[PATCH] Run Ispell through git.txt
Signed-off-by: Yasushi SHOJI <yashi@atmark-techno.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 15 Aug 2005 08:56:23 +0000 (01:56 -0700)]
Show which branch you are on in git-status output.
When not on the "master" branch, show which branch we are
working on in the git-status message.
Signed-off-by: Junio C Hamano <junkio@cox.net>
projects / git.git / log