git.tremily.us Git - git.git/log

Kill off get_relative_cwd()

Function dir_inside_of() does something similar (correctly), but looks
easier to understand and does not bundle cwd to its business. Given
get_relative_cwd's only user is is_inside_dir, we can kill it for
good.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

setup: return correct prefix if worktree is '/'

The same old problem reappears after setup code is reworked. We tend
to assume there is at least one path component in a path and forget
that path can be simply '/'.

Reported-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Git 1.7.4.2

Signed-off-by: Junio C Hamano <gitster@pobox.com>

gitweb: Fix handling of fractional timezones in parse_date

Fractional timezones, like -0330 (NST used in Canada) or +0430
(Afghanistan, Iran DST), were not handled properly in parse_date; this
means values such as 'minute_local' and 'iso-tz' were not generated
correctly.

This was caused by two mistakes:

* sign of timezone was applied only to hour part of offset, and not
 as it should be also to minutes part (this affected only negative
 fractional timezones).

* 'int $h + $m/60' is 'int($h + $m/60)' and not 'int($h) + $m/60',
 so fractional part was discarded altogether ($h is hours, $m is
 minutes, which is always less than 60).

Note that positive fractional timezones +0430, +0530 and +1030 can be
found as authortime in git.git repository itself.

For example http://repo.or.cz/w/git.git/commit/88d50e7 had authortime
of "Fri, 8 Jan 2010 18:48:07 +0000 (23:48 +0530)", which is not marked
with 'atnight', when "git show 88d50e7" gives correct author date of
"Sat Jan 9 00:18:07 2010 +0530".

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

git-am.txt: advertise 'git am --abort' instead of 'rm .git/rebase-apply'

'git am --abort' is around for quite a long time now, and users should
normally not poke around inside the .git directory, yet the
documentation of 'git am' still recommends the following:

... if you decide to start over from scratch,
run `rm -f -r .git/rebase-apply` ...

Suggest 'git am --abort' instead.

It's not quite the same as the original, because 'git am --abort' will
restore the original branch, while simply removing '.git/rebase-apply'
won't, but that's rather a thinko in the original wording, because
that won't actually "start over _from scratch_".

Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

bisect: visualize with git-log if gitk is unavailable

If gitk is not available in the PATH, bisect ends up
exiting with the shell's 127 error code, confusing the git
wrapper into thinking that bisect is not a git command.

We already fallback to git-log if there doesn't seem to be a
graphical display available. We should do the same if gitk
is not available in our PATH at all. This not only fixes the
ugly error message, but is a much more sensible default than
failing to show the user anything.

Reported by Maxin John.

Tested-by: Maxin B. John <maxin@maxinbjohn.info>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Update draft release notes to 1.7.4.2

Signed-off-by: Junio C Hamano <gitster@pobox.com>

Merge branch 'sp/maint-fd-limit' into maint

* sp/maint-fd-limit:
  sha1_file.c: Don't retain open fds on small packs
  mingw: add minimum getrlimit() compatibility stub
  Limit file descriptors used by packs

Merge branch 'mr/hpux' into maint

* mr/hpux:
git-compat-util.h: Honor HP C's noreturn attribute
Makefile: add NO_FNMATCH_CASEFOLD to HP-UX section

Merge branch 'so/submodule-no-update-first-time' into maint

* so/submodule-no-update-first-time:
t7406: "git submodule update {--merge|--rebase]" with new submodules
submodule: no [--merge|--rebase] when newly cloned

Merge branch 'mo/perl-bidi-pipe-envfix' into maint

* mo/perl-bidi-pipe-envfix:
perl: command_bidi_pipe() method should set-up git environmens

Merge branch 'ae/better-template-failure-report' into maint

* ae/better-template-failure-report:
Improve error messages when temporary file creation fails

Work around broken ln on solaris as used in t8006

The test setup in t8006-blame-textconv.sh uses "ln -sf" to
overwrite an existing symlink. Unfortunately, both /usr/bin/ln
and /usr/xpg4/bin/ln on solaris 9 don't properly handle -f and -s
used at the same time. This caused the test setup and subsequent
checks to fail.

Instead, remove the symlink and then create a new one in the
setup code.

The upstream Solaris bug (fixed in 10, but not 9) is documented
here:

 http://bugs.opensolaris.org/view_bug.do?bug_id=4372462

Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/README: Add a note about running commands under valgrind

The test suite runs valgrind with certain options activated. Add a
note saying how to run commands under the same conditions as the test
suite does.

Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

gitweb: Always call parse_date with timezone parameter

Timezone is required to correctly set local time, which would be needed
for future 'localtime' feature.

While at it, remove unnecessary call to the function from git_log_body,
as its return value is not used anywhere.

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

bisect: explain the rationale behind 125

Signed-off-by: Junio C Hamano <gitster@pobox.com>

docs: fix grammar in gitattributes.txt

[jc: with a fixlet from Marc Branchaud]

Signed-off-by: Alexei Sholik <alcosholik@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Prepare draft release notes to 1.7.4.2

Signed-off-by: Junio C Hamano <gitster@pobox.com>

Merge branch 'jn/maint-commit-missing-template' into maint

* jn/maint-commit-missing-template:
commit: error out for missing commit message template

Merge branch 'lt/rename-no-extra-copy-detection' into maint

* lt/rename-no-extra-copy-detection:
  diffcore-rename: improve estimate_similarity() heuristics
  diffcore-rename: properly honor the difference between -M and -C
  for_each_hash: allow passing a 'void *data' pointer to callback

Merge branch 'jk/diffstat-binary' into maint

* jk/diffstat-binary:
diff: don't retrieve binary blobs for diffstat
diff: handle diffstat of rewritten binary files

Merge branch 'mg/maint-difftool-vim-readonly' into maint

* mg/maint-difftool-vim-readonly:
mergetool-lib: call vim in readonly mode for diffs

Merge branch 'jn/test-terminal-punt-on-osx-breakage' into maint

* jn/test-terminal-punt-on-osx-breakage:
tests: skip terminal output tests on OS X

Merge branch 'jk/fail-null-clone' into maint

* jk/fail-null-clone:
clone: die when trying to clone missing local path

Merge branch 'jh/push-default-upstream-configname' into maint

* jh/push-default-upstream-configname:
push.default: Rename 'tracking' to 'upstream'

Merge branch 'mg/placeholders-are-lowercase' into maint

* mg/placeholders-are-lowercase:
 Make <identifier> lowercase in Documentation
 Make <identifier> lowercase as per CodingGuidelines
 Make <identifier> lowercase as per CodingGuidelines
 Make <identifier> lowercase as per CodingGuidelines
 CodingGuidelines: downcase placeholders in usage messages

Merge branch 'mg/patch-id' into maint

* mg/patch-id:
git-patch-id: do not trip over "no newline" markers
git-patch-id: test for "no newline" markers

Merge branch 'js/maint-merge-use-prepare-commit-msg-hook' into maint

* js/maint-merge-use-prepare-commit-msg-hook:
merge: honor prepare-commit-msg hook

gitweb: highlight: replace tabs with spaces

Consider the following code fragment:

 /*
 * test
 */

vim ":set list" mode shows that the first character on each line is a
tab:

^I/*$
^I * test$
^I */$

By default, the "highlight" program will retain the tabs in the HTML
output:

$ highlight --fragment --syntax c test.c
 /*
 * test
 */

vim list mode:

^I/*$
^I * test$
^I */$

In gitweb, this winds up looking something like:

 1 /*
 2 * test
 3 */

I tried both Firefox and Opera and saw the same behavior.

The desired output is:

 1 /*
 2 * test
 3 */

This can be accomplished by specifying "--replace-tabs=8" on the
highlight command line.

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Acked-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

make_absolute_path: return the input path if it points to our buffer

Some codepaths call make_absolute_path with its own return value as
input. In such a cases, return the path immediately.

This fixes a valgrind-discovered error, whereby we tried to copy a
string onto itself.

Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

valgrind: ignore SSE-based strlen invalid reads

Some versions of strlen use SSE to speed up the calculation and load 4
bytes at a time, even if it means reading past the end of the
allocated memory. This read is safe and when the strlen function is
inlined, it is not replaced by valgrind, which reports a
false-possitive.

Tell valgrind to ignore this particular error, as the read is, in
fact, safe. Current upstream-released version 3.6.1 is affected. Some
distributions have this fixed in their latest versions.

Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

diff --submodule: split into bite-sized pieces

Introduce two functions:

- prepare_submodule_summary prepares the revision walker
 to list changes in a submodule. That is, it:

 * finds merge bases between the commits pointed to this
 path from before ("left") and after ("right") the change;
 * checks whether this is a fast-forward or fast-backward;
 * prepares a revision walk to list commits in the symmetric
 difference between the commits at each endpoint.

 It returns nonzero on error.

- print_submodule_summary runs the revision walk and saves
 the result to a strbuf in --left-right format.

The goal is just readability. No functional change intended.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

cherry: split off function to print output lines

Readers uninterested in the details of "git cherry"'s output format
can see

print_commit('-', commit, verbose, abbrev);

and ignore the details.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

branch: split off function that writes tracking info and commit subject

Introduce a add_verbose_info function that takes care of adding

- an abbreviated object name;
- a summary of the form [ahead x, behind y] of the relationship
to the corresponding upstream branch;
- a one line commit subject

for the tip commit of a branch, for use in "git branch -v" output.

No functional change intended. This just unindents the code a little
and makes it easier to skip on first reading.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

standardize brace placement in struct definitions

In a struct definitions, unlike functions, the prevailing style is for
the opening brace to go on the same line as the struct name, like so:

struct foo {
int bar;
char *baz;
};

Indeed, grepping for 'struct [a-z_]* {$' yields about 5 times as many
matches as 'struct [a-z_]*$'.

Linus sayeth:

Heretic people all over the world have claimed that this inconsistency
is ... well ... inconsistent, but all right-thinking people know that
(a) K&R are _right_ and (b) K&R are right.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

compat: make gcc bswap an inline function

Without this change, gcc -pedantic warns:

cache.h: In function 'ce_to_dtype':
cache.h:270:21: warning: ISO C forbids braced-groups within expressions [-pedantic]

An inline function is more readable anyway.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

enums: omit trailing comma for portability

Since v1.7.2-rc0~23^2~2 (Add per-repository eol normalization,
2010-05-19), building with gcc -std=gnu89 -pedantic produces warnings
like the following:

convert.c:21:11: warning: comma at end of enumerator list [-pedantic]

gcc is right to complain --- these commas are not permitted in C89.
In the spirit of v1.7.2-rc0~32^2~16 (2010-05-14), remove them.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Revert "core.abbrevguard: Ensure short object names stay unique a bit longer"

This reverts commit 72a5b561fc1c4286bc7c5b0693afc076af261e1f, as adding
fixed number of hexdigits more than necessary to make one object name
locally unique does not help in futureproofing the uniqueness of names
we generate today.

Signed-off-by: Junio C Hamano <gitster@pobox.com>

Fix typo in t/README

Signed-off-by: Mathias Lafeldt <misfire@debugon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

ls-remote documentation: <refs> argument is optional

Correct SYNOPSIS section.

Signed-off-by: Piotr Krukowiecki <piotr.krukowiecki@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Add Author and Documentation sections to git-for-each-ref.txt

Signed-off-by: Alexei Sholik <alcosholik@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Documentation: remove redundant colons in git-for-each-ref.txt

Signed-off-by: Alexei Sholik <alcosholik@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

SubmittingPatches: clarify the expected commit log description

Earlier, 47afed5 (SubmittingPatches: itemize and reflect upon well written
changes, 2009-04-28) added a discussion on the contents of the commit log
message, but the last part of the new paragraph didn't make much sense.
Reword it slightly to make it more readable.

Update the "quicklist" to clarify what we mean by "motivation" and
"contrast". Also mildly discourage external references.

Signed-off-by: Junio C Hamano <gitster@pobox.com>

diff format documentation: clarify --cc and -c

The description was unclear if -c or --cc was the default (--cc is for
some commands), and incorrectly implied that the default applies to
all the diff generating commands.

Most importantly, "log" does not default to "--cc" (it defaults to
"--no-merges") and "log -p" obeys the user's wish to see non-combined
format. Only "diff" (during merge and three-blob comparison) and
"show" use --cc as the default.

Signed-off-by: Adam Monsen <haircut@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

rev-list-options.txt: typo fix

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

git-compat-util.h: Honor HP C's noreturn attribute

HP C for Integrity servers (Itanium) gained support for noreturn
attribute sometime in 2006. It was released in Compiler Version
A.06.10 and made available in July 2006.

The __HP_cc define detects the HP C compiler version. Precede the
__GNUC__ check so it works well when compiling with HP C using -Agcc
option that enables partial support for the GNU C dialect. The -Agcc
defines the __GNUC__ too.

Signed-off-by: Michal Rokos <michal.rokos@nextsoft.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Makefile: add NO_FNMATCH_CASEFOLD to HP-UX section

fnmatch() on HP-UX does not support the GNU FNM_CASEFOLD extension,
so set NO_FNMATCH_CASEFOLD to use the internal fnmatch implementation.

Signed-off-by: Michal Rokos <michal.rokos@nextsoft.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Documentation: fix a typo in git-apply.txt

git-apply accepts the --cached option, not --cache.

Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

init: remove unnecessary check

git_dir must always be non-NULL so "if (git_dir)" is unnecessary.
Before this code, if git_dir == NULL, it will default to
DEFAULT_GIT_DIR_ENVIRONMENT.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

sha1_file.c: Don't retain open fds on small packs

If a pack file is small enough that its entire contents fits within
one mmap window, mmap the file and then immediately close its file
descriptor. This reduces the number of file descriptors that are
needed to read from repositories with many tiny pack files, such
as one that has received 1000 pushes (and created 1000 small pack
files) since its last repack.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

mingw: add minimum getrlimit() compatibility stub

We don't have getrlimit on Windows :( Limit of 2048 taken from MSDN:

http://msdn.microsoft.com/en-us/library/6e3b887c(v=vs.71).aspx

Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>

verify-pack: add --stat-only to the synopsis section

Signed-off-by: Junio C Hamano <gitster@pobox.com>

Limit file descriptors used by packs

Rather than using 'errno == EMFILE' after a failed open() call
to indicate the process is out of file descriptors and an LRU
pack window should be closed, place a hard upper limit on the
number of open packs based on the actual rlimit of the process.

By using a hard upper limit that is below the rlimit of the current
process it is not necessary to check for EMFILE on every single
fd-allocating system call. Instead reserving 25 file descriptors
makes it safe to assume the system call won't fail due to being over
the filedescriptor limit. Here 25 is chosen as a WAG, but considers
3 for stdin/stdout/stderr, and at least a few for other Git code
to operate on temporary files. An additional 20 is reserved as it
is not known what the C library needs to perform other services on
Git's behalf, such as nsswitch or name resolution.

This fixes a case where running `git gc --auto` in a repository
with more than 1024 packs (but an rlimit of 1024 open fds) fails
due to the temporary output file not being able to allocate a
file descriptor. The output file is opened by pack-objects after
object enumeration and delta compression are done, both of which
have already opened all of the packs and fully populated the file
descriptor table.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

branch_merged: fix grammar in warning

Signed-off-by: Eric Hanchrow <eric.hanchrow@gmail.com>
Helped-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

commit: error out for missing commit message template

When "git commit" was rewritten in C (v1.5.4-rc0~78^2~30,
2007-11-08), a subtle bug in --template was introduced. If the
file named by a --template parameter is missing, previously git
would error out with a message:

Commit template file does not exist.

but in the C version the --template parameter gets ignored and
the default template is used.

t7500 has two tests for this case which would have caught it, except
that with the default $EDITOR, the commit message template is left
unmodified, causing 'git commit' to error out and the test to
succeed.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

mergetool-lib: call vim in readonly mode for diffs

When [g]vimdiff is called for files which are opened already, the editor
complains about the existing swap file. But we do not want to write
anything when called from difftool. So, make difftool use "-R" for the
vim family. This

- prevents the use of a swap file and
- marks the buffers readonly.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

diff: don't retrieve binary blobs for diffstat

We only need the size, which is much cheaper to get,
especially if it is a big binary file.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

diff: handle diffstat of rewritten binary files

The logic in builtin_diffstat assumes that a
complete_rewrite pair should have its lines counted. This is
nonsensical for binary files and leads to confusing things
like:

 $ git diff --stat --summary HEAD^ HEAD
 foo.rand | Bin 4096 -> 4096 bytes
 1 files changed, 0 insertions(+), 0 deletions(-)

 $ git diff --stat --summary -B HEAD^ HEAD
 foo.rand | 34 +++++++++++++++-------------------
 1 files changed, 15 insertions(+), 19 deletions(-)
 rewrite foo.rand (100%)

So let's reorder the function to handle binary files first
(which from diffstat's perspective look like complete
rewrites anyway), then rewrites, then actual diffstats.

There are two bonus prizes to this reorder:

 1. It gets rid of a now-superfluous goto.

 2. The binary case is at the top, which means we can
 further optimize it in the next patch.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Documentation: clarify -u<mode> option defaults

Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t7500-commit.sh: use test_cmp instead of test

Change commit_msg_is() in t/t7500-commit.sh to use test_cmp instead of
the shell's test function. Now if a test fails we'll get test_cmp
output showing us what failed.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/gitweb-lib.sh: Ensure that errors are shown for --debug --immediate

Because '--immediate' stops test suite after first error, therefore in
this mode

test_debug 'cat gitweb.log'

was never ran, thus in effect negating effect of '--debug' option.
This made finidng the cause of errors in gitweb test sute difficult.

Modify the gitweb_run test subroutine to run test_debug itself in the
case of errors (and also remove "test_debug 'cat gitweb.log'" from
gitweb tests).

This makes it possible to run *gitweb tests* with --immediate ---debug
combination of options; also it makes gitweb tests to not output
spurious debug data that is not considered error.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

gitweb/gitweb.perl: don't call S_ISREG() with undef

Change S_ISREG($to_mode_oct) to S_ISREG($from_mode_oct) in the branch
that handles from modes, not to modes. This logic appears to have been
caused by copy/paste programming by Jakub Narebski in e8e41a93. It
would be better to rewrite this code not to be duplicated, but I
haven't done so.

This issue caused a failing test on perl 5.13.9, which has a warning
that turned this up:

 gitweb.perl: Use of uninitialized value in subroutine entry at /home/avar/g/git/t/../gitweb/gitweb.perl line 4415.

Which caused the Git test suite to fail on this test:

 ./t9500-gitweb-standalone-no-errors.sh (Wstat: 256 Tests: 90 Failed: 84)
 Failed tests: 1-8, 10-36, 38-45, 47-48, 50-88
 Non-zero exit status: 1

Reported-by: perl 5.13.9
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

gitweb/gitweb.perl: remove use of qw(...) as parentheses

Using the qw(...) construct as implicit parentheses was deprecated in
perl 5.13.5. Change the relevant code in gitweb to not use the
deprecated construct. The offending code was introduced in 3562198b by
Jakub Narebski.

The issue is that perl will now warn about this:

 $ perl -wE 'for my $i qw(a b) { say $i }'
 Use of qw(...) as parentheses is deprecated at -e line 1.
 a
 b

This caused gitweb.perl to warn on perl 5.13.5 and above, and these
tests to fail on those perl versions:

 ./t9501-gitweb-standalone-http-status.sh (Wstat: 256 Tests: 11 Failed: 10)
 Failed tests: 2-11
 Non-zero exit status: 1
 ./t9502-gitweb-standalone-parse-output.sh (Wstat: 256 Tests: 10 Failed: 9)
 Failed tests: 2-10
 Non-zero exit status: 1

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

diffcore-rename: improve estimate_similarity() heuristics

The logic to quickly dismiss potential rename pairs was broken. It
would too eagerly dismiss possible renames when all of the difference
was due to pure new data (or deleted data).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

diffcore-rename: properly honor the difference between -M and -C

We would allow rename detection to do copy detection even when asked
purely for renames. That confuses users, but more importantly it can
terminally confuse the recursive merge rename logic.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

for_each_hash: allow passing a 'void *data' pointer to callback

For the find_exact_renames() function, this allows us to pass the
diff_options structure pointer to the low-level routines. We will use
that to distinguish between the "rename" and "copy" cases.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

clone: die when trying to clone missing local path

Since 86ac751 (Allow cloning an empty repository,
2009-01-23), doing:

git clone does-not-exist

has created does-not-exist as an empty repository. This was
an unintentional side effect of 86ac751. Even weirder,
doing:

git clone does-not-exist new-dir

_does_ fail, making this "feature" (if you want to consider
it such) broken. Let's detect this situation and explicitly
die. It's almost certainly not what the user intended.

This patch also adds two tests. One for the missing path
case, and one to confirm that a similar case, cloning a
non-repository directory, fails.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

tests: skip terminal output tests on OS X

On Mac OS X 10.5.0, test_terminal gets stuck reading from the pty
master every once in a while. To reproduce the problem:

perl -MIO::Pty -MFile::Copy -e '
for (my $i = 0;; $i++) {
my $master = new IO::Pty;
my $slave = $master->slave;
if (fork == 0) {
close $master or die "close: $!";
open STDOUT, ">&", $slave or die "dup2: $!";
close $slave or die "close: $!";
exec("echo", "hi", $i) or die "exec: $!";
}
close $slave or die "close: $!";
copy($master, \*STDOUT) or die "copy: $!";
close $master or die "close: $!";
wait;
}
'

It blocks after 7000 iterations or so in sysread(). The relevant
sysread() call is the second call by the parent, which presumably
executes before the child dies but after the parent has read all
output from there.

Since this is an intermitent problem, the quick check of terminal
support in lib-terminal doesn't catch it. Skip these tests on the Mac
for now.

Noticed-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t7406: "git submodule update {--merge|--rebase]" with new submodules

Add two test cases in t7406 to ensure that the --merge/--rebase options
are ignored for "git submodule update" with new modules. These test that
a simple checkout is performed instead.

Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

submodule: no [--merge|--rebase] when newly cloned

"git submodule update" can be run with either the "--merge" or "--rebase"
option, or submodule.<name>.update configuration variable can be set to
"merge" or "rebase, to cause local work to get integrated when updating
the submodule.

When a submodule is newly cloned, however, it does not have a check out
when a rebase or merge is attempted, leading to a failure. For newly
cloned submodules, simply check out the appropriate revision. There is no
local work to integrate with for them.

Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

git-patch-id: do not trip over "no newline" markers

Currently, patch-id trips over our very own diff extension for marking
the absence of newline at EOF.

Fix it. (Ignore it, it's whitespace.)

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

git-patch-id: test for "no newline" markers

Currently, patch-id trips over our very own output that marks the absence
of newline at EOF.

Expose this in a test.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Make <identifier> lowercase in Documentation

Leaving uppercase abbreviations (e.g. URL) and an identifier named after
an upercase env variable (CVSROOT) in place, this adjusts the few
remaining cases and fixes an unidentified identifier along the way.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Merge branch 'maint-1.7.3' into maint

* maint-1.7.3:

Merge branch 'maint-1.7.2' into maint-1.7.3

* maint-1.7.2:
fast-import: introduce "feature notes" command
fast-import: clarify documentation of "feature" command

Merge branch 'maint-1.7.1' into maint-1.7.2

* maint-1.7.1:
fast-import: introduce "feature notes" command
fast-import: clarify documentation of "feature" command

Merge branch 'maint-1.7.0' into maint-1.7.1

* maint-1.7.0:
fast-import: introduce "feature notes" command
fast-import: clarify documentation of "feature" command

push.default: Rename 'tracking' to 'upstream'

Users are sometimes confused with two different types of "tracking" behavior
in Git: "remote-tracking" branches (e.g. refs/remotes/*/*) versus the
merge/rebase relationship between a local branch and its @{upstream}
(controlled by branch.foo.remote and branch.foo.merge config settings).

When the push.default is set to 'tracking', it specifies that a branch should
be pushed to its @{upstream} branch. In other words, setting push.default to
'tracking' applies only to the latter of the above two types of "tracking"
behavior.

In order to make this more understandable to the user, we rename the
push.default == 'tracking' option to push.default == 'upstream'.

push.default == 'tracking' is left as a deprecated synonym for 'upstream'.

Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

parse_tag_buffer(): do not prefixcmp() out of range

There is a check (size < 64) at the beginning of the function, but
that only covers object+type lines.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

merge: honor prepare-commit-msg hook

When a merge is stopped due to conflicts or --no-commit, the
subsequent commit calls the prepare-commit-msg hook. However,
it is not called after a clean merge. Fix this inconsistency
by invoking the hook after clean merges as well.

Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Make <identifier> lowercase as per CodingGuidelines

*.c part for matches with '<[A-Z]+>' (and affected test).

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Make <identifier> lowercase as per CodingGuidelines

*.c part for matches with '"[A-Z]+"'.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Make <identifier> lowercase as per CodingGuidelines

parse-options part

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

CodingGuidelines: downcase placeholders in usage messages

We accumulated some inconsistencies without an explicit guidance to spell
this out over time.

Signed-off-by: Junio C Hamano <gitster@pobox.com>

pull: do not display fetch usage on --help-all

Currently, "git pull --help-all" displays the fetch usage info.

Make it equivalent to "git pull -h" instead since "--help-all" is
documented in gitcli(7).

Do not try to sanitize the pull option parser (aka last hair puller).

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

git-tag.txt: list all modes in the description

Currently, the description sounds as if it applied always, but most of
its content is true in "create tag mode" only.

Make this clearer by listing all modes upfront.

Also, sneak in some linguistic improvements and make it clearer that
lightweight tags are "created" because "written" may be misread as
"are output".

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

commit,status: describe -u likewise

They differ by one character only. Being exactly equal should help
translations.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

add: describe --patch like checkout, reset

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

commit,merge,tag: describe -m likewise

This also removes the superfluous "specify" and rewords the misleading
"if any" which sounds as if omitting "-m" would omit the merge commit
message. (It means "if a merge commit is created at all".)

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

clone,init: describe --template using the same wording

This also corrects a wrong description for clone.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

commit,status: describe --porcelain just like push

Push has the clearer description, so take that one for all.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

commit,tag: use same wording for -F

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

perl: command_bidi_pipe() method should set-up git environmens

When command_input_pipe and command_output_pipe are used as a
method of a Git::repository instance, they eventually call into
_cmd_exec method that sets up the execution environment such as
GIT_DIR, GIT_WORK_TREE environment variables and the current
working directory in the child process that interacts with the
repository.

command_bidi_pipe however didn't expect to be called as such, and
lacked all these set-up. Because of this, a program that did this
did not work as expected:

 my $repo = Git->repository(Directory => '/some/where/else');
 my ($pid, $in, $out, $ctx) =
 $repo->command_bidi_pipe(qw(hash-object -w --stdin-paths));

This patch refactors the _cmd_exec into _setup_git_cmd_env that
sets up the execution environment, and makes _cmd_exec and
command_bidi_pipe to use it.

Note that unlike _cmd_exec that execv's a git command as an
external process, command_bidi_pipe is called from the main line
of control, and the execution environment needs to be restored
after open2() does its magic.

Signed-off-by: Masatake Osanai <unpush@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

configure: use AC_LANG_PROGRAM consistently

Avoid warnings from Autoconf 2.68 about missing use of AC_LANG_PROGRAM
and friends.

Quoting autoconf-2.68/NEWS:

 ** The macros AC_PREPROC_IFELSE, AC_COMPILE_IFELSE, AC_LINK_IFELSE, and
 AC_RUN_IFELSE now warn if the first argument failed to use
 AC_LANG_SOURCE or AC_LANG_PROGRAM to generate the conftest file
 contents. A new macro AC_LANG_DEFINES_PROVIDED exists if you have
 a compelling reason why you cannot use AC_LANG_SOURCE but must
 avoid the warning.

The underlying reason for that change is that AC_LANG_{SOURCE,PROGRAM}
take care to supply the previously computed set of #defines (and
include standard headers if so desired) for preprocessed languages
like C and C++.

In some cases, AC_LANG_PROGRAM is already used but not sufficiently
m4-quoted, so we just need to add another set of [quotes] to prevent
the autoconf warning from being triggered bogusly. Quoting all
arguments (except when calling special macros that need to be expanded
before recursion) is better style, anyway. These and more rules are
described in detail in 'info Autoconf "Programming in M4"'.

No change in the resulting config.mak.autogen after running
./configure intended.

Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

string_list_append: always set util pointer to NULL

It is not immediately obvious that the util field may
contain random bytes after appending an item. Especially
since the string_list_insert* functions _do_ explicitly zero
the util pointer.

This does not appear to be a bug in any current git code, as
all callers either fill in the util field immediately or
never use it. However, it is worth it to be less surprising
to new users of the string-list API who may expect it to be
intialized to NULL.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

correct type of EMPTY_TREE_SHA1_BIN

Functions such as hashcmp that expect a binary SHA-1 value take
parameters of type "unsigned char *" to avoid accepting a textual
SHA-1 passed by mistake. Unfortunately, this means passing the string
literal EMPTY_TREE_SHA1_BIN requires an ugly cast. Tweak the
definition of EMPTY_TREE_SHA1_BIN to produce a value of more
convenient type.

In the future the definition might change to

extern const unsigned char empty_tree_sha1_bin[20];
#define EMPTY_TREE_SHA1_BIN empty_tree_sha1_bin

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Git 1.7.4.1

Signed-off-by: Junio C Hamano <gitster@pobox.com>

Merge branch 'jc/fsck-fixes' into maint

* jc/fsck-fixes:
fsck: do not give up too early in fsck_dir()
fsck: drop unused parameter from traverse_one_object()

clone: fixup recurse_submodules option

The recurse_submodules option was added in ccdd3da6 to bring 'git clone'
into line with 'git fetch' and future commands. The correct option should
have been "recurse-submodules".

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

svn-fe: warn about experimental status

svn-fe is young and some coming cleanups might involve backward
incompatible UI changes. Add some words of warning to the manual so
early adopters that are not following the project closely don't get
burned.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>