Andy Parkins [Tue, 2 Oct 2007 11:02:57 +0000 (12:02 +0100)]
Add a test script for for-each-ref, including test of date formatting
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 2 Oct 2007 21:31:37 +0000 (14:31 -0700)]
dateformat: parse %(xxdate) %(yydate:format) correctly
Andy Parkins noticed that parsing of the above would not
correctly notice that xxdate does not have any format
specifier.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andy Parkins [Fri, 28 Sep 2007 14:17:45 +0000 (15:17 +0100)]
Make for-each-ref's grab_date() support per-atom formatting
grab_date() gets an extra parameter - atomname; this extra parameter is
checked to see if it has a ":<format>" extra component in it, and if so
that "<format>" string is passed to parse_date_format() to produce an
enum date_mode value which is then further passed to show_date().
In short it allows the user of git-for-each-ref to do things like this:
$ git-for-each-ref --format='%(taggerdate:default)' refs/tags/v1.5.2
Sun May 20 00:30:42 2007 -0700
$ git-for-each-ref --format='%(taggerdate:relative)' refs/tags/v1.5.2
4 months ago
$ git-for-each-ref --format='%(taggerdate:short)' refs/tags/v1.5.2
2007-05-20
$ git-for-each-ref --format='%(taggerdate:local)' refs/tags/v1.5.2
Sun May 20 08:30:42 2007
$ git-for-each-ref --format='%(taggerdate:iso8601)' refs/tags/v1.5.2
2007-05-20 00:30:42 -0700
$ git-for-each-ref --format='%(taggerdate:rfc2822)' refs/tags/v1.5.2
Sun, 20 May 2007 00:30:42 -0700
The default, when no ":<format>" is specified is ":default", leaving the
existing behaviour unchanged.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andy Parkins [Fri, 28 Sep 2007 14:17:39 +0000 (15:17 +0100)]
Make for-each-ref allow atom names like "<name>:<something>"
In anticipation of supplying a per-field date format specifier, this
patch makes parse_atom() in builtin-for-each-ref.c allow atoms that have
a valid atom name (as determined by the valid_atom[] table) followed by
a colon, followed by an arbitrary string.
The arbitrary string is where the format for the atom will be specified.
Note, if different formats are specified for the same atom, multiple
entries will be made in the used_atoms table to allow them to be
distinguished by the grab_XXXX() functions.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andy Parkins [Fri, 28 Sep 2007 14:17:31 +0000 (15:17 +0100)]
parse_date_format(): convert a format name to an enum date_mode
Factor out the code to parse --date=<format> parameter to revision
walkers into a separate function, parse_date_format(). This function
is passed a string and converts it to an enum date_format:
- "relative" => DATE_RELATIVE
- "iso8601" or "iso" => DATE_ISO8601
- "rfc2822" => DATE_RFC2822
- "short" => DATE_SHORT
- "local" => DATE_LOCAL
- "default" => DATE_NORMAL
In the event that none of these strings is found, the function die()s.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 29 Sep 2007 23:44:44 +0000 (16:44 -0700)]
Merge branch 'gr/smtp'
* gr/smtp:
send-email --smtp-server-port: allow overriding the default port
Junio C Hamano [Sat, 29 Sep 2007 23:44:25 +0000 (16:44 -0700)]
Merge branch 'ss/svnimport'
* ss/svnimport:
Fix pool handling in git-svnimport to avoid memory leaks.
Junio C Hamano [Sat, 29 Sep 2007 23:43:23 +0000 (16:43 -0700)]
Merge branch 'sv/svn'
* sv/svn:
git-svn: handle changed svn command-line syntax
git-svn: fix test for trunk svn (transaction out of date)
git-svn: fix test for trunk svn (commit message not needed)
Junio C Hamano [Sat, 29 Sep 2007 23:43:10 +0000 (16:43 -0700)]
Merge branch 'ml/submodule'
* ml/submodule:
git-submodule - allow a relative path as the subproject url
Junio C Hamano [Sat, 29 Sep 2007 23:43:06 +0000 (16:43 -0700)]
Merge branch 'jb/remote-rm'
* jb/remote-rm:
git-remote rm: add tests and minor fix-ups
remote: document the 'rm' subcommand
remote: add 'rm' subcommand
Junio C Hamano [Sat, 29 Sep 2007 23:42:50 +0000 (16:42 -0700)]
Merge branch 'jk/diff-rename'
* jk/diff-rename:
diffcore-rename: cache file deltas
Junio C Hamano [Sat, 29 Sep 2007 23:31:40 +0000 (16:31 -0700)]
Sync with GIT 1.5.3.3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 29 Sep 2007 23:07:46 +0000 (16:07 -0700)]
GIT 1.5.3.3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Sat, 29 Sep 2007 16:50:39 +0000 (09:50 -0700)]
Fix revision log diff setup, avoid unnecessary diff generation
We used to incorrectly start calculating diffs whenever any argument but
'-z' was recognized by the diff options parsing. That was bogus, since not
all arguments result in diffs being needed, so we just waste a lot of time
and effort on calculating diffs that don't matter.
This actually also fixes another bug in "git log". Try this:
git log -C
and notice how it prints an extra empty line in between log entries, even
though it never prints the actual diff (because we didn't ask for any diff
format, so the diff machinery never prints anything).
With this patch, that bogus empty line is gone, because "revs->diff" is
never set. So this isn't just a "wasted time and effort" issue, it's also
a slight semantic fix.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Miklos Vajna [Wed, 26 Sep 2007 23:34:59 +0000 (01:34 +0200)]
git-bundle: fix commandline examples in the manpage
Multiple commands were displayed in one line, making the manpage hard to read.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 29 Sep 2007 22:39:39 +0000 (15:39 -0700)]
Merge branch 'mergetool' of git://repo.or.cz/git/mergetool into maint
* 'mergetool' of git://repo.or.cz/git/mergetool:
mergetool: Fix typo in options passed to kdiff3
mergetool: fix emerge when running in a subdirectory
Mergetool generating blank files (1.5.3)
Theodore Ts'o [Sat, 29 Sep 2007 02:26:05 +0000 (22:26 -0400)]
mergetool: Fix typo in options passed to kdiff3
Fix missing double hyphens in "-L1" and "-L2"
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o [Sat, 29 Sep 2007 01:23:22 +0000 (21:23 -0400)]
mergetool: fix emerge when running in a subdirectory
Only pass the basename of the output filename when to emerge, since
emerge interprets non-absolute pathnames relative to the containing
directory of the output buffer.
Thanks to Kelvie Wong for pointing this out.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Junio C Hamano [Thu, 27 Sep 2007 21:41:23 +0000 (14:41 -0700)]
Mergetool generating blank files (1.5.3)
When mergetool is run from a subdirectory, "ls-files -u" nicely
limits the output to conflicted files in that directory, but
we need to give the full path to cat-file plumbing to grab the
contents of stages.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Dan Nicholson [Thu, 27 Sep 2007 20:30:59 +0000 (13:30 -0700)]
quiltimport: Skip non-existent patches
When quiltimport encounters a non-existent patch in the series file,
just skip to the next patch. This matches the behavior of quilt.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Mon, 17 Sep 2007 22:34:06 +0000 (23:34 +0100)]
apply: get rid of --index-info in favor of --build-fake-ancestor
git-am used "git apply -z --index-info" to find the original versions
of the files touched by the diff, to be able to do an inexpensive
three-way merge.
This operation makes only sense in a repository, since the index
information in the diff refers to blobs, which have to be present in
the current repository.
Therefore, teach "git apply" a mode to write out the result as an
index file to begin with, obviating the need for scripts to do it
themselves.
The sole user for --index-info is "git am" is converted to
use --build-fake-ancestor in this patch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Carlos Rica [Tue, 11 Sep 2007 03:17:28 +0000 (05:17 +0200)]
Move make_cache_entry() from merge-recursive.c into read-cache.c
The function make_cache_entry() is too useful to be hidden away in
merge-recursive. So move it to libgit.a (exposing it via cache.h).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 26 Sep 2007 00:27:54 +0000 (17:27 -0700)]
send-email --smtp-server-port: allow overriding the default port
You can use --smtp-server-port option to specify a port
different from the default (typically, SMTP servers listen
to smtp port 25 and ssmtp port 465).
Users should be aware that sending auth info over non-ssl
connections may be unsafe or just may not work at all
depending on SMTP server config.
Signed-off-by: Glenn Rempe <glenn@rempe.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 25 Sep 2007 19:29:42 +0000 (15:29 -0400)]
diffcore-rename: cache file deltas
We find rename candidates by computing a fingerprint hash of
each file, and then comparing those fingerprints. There are
inherently O(n^2) comparisons, so it pays in CPU time to
hoist the (rather expensive) computation of the fingerprint
out of that loop (or to cache it once we have computed it once).
Previously, we didn't keep the filespec information around
because then we had the potential to consume a great deal of
memory. However, instead of keeping all of the filespec
data, we can instead just keep the fingerprint.
This patch implements and uses diff_free_filespec_data_large
to accomplish that goal. We also have to change
estimate_similarity not to needlessly repopulate the
filespec data when we already have the hash.
Practical tests showed 4.5x speedup for a 10% memory usage
increase.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matt Kraai [Wed, 26 Sep 2007 01:30:13 +0000 (18:30 -0700)]
rebase -i: create .dotest-merge after validating options.
Creating .dotest-merge before validating the options prevents both
--continue and --interactive from working if the options are invalid,
so only create it after validating the options.
[jc: however, just moving the creation of DOTEST breaks output]
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Randy Dunlap [Wed, 26 Sep 2007 05:02:28 +0000 (22:02 -0700)]
core-tutorial: correct URL
The tinyurl is incorrect -- it attempts to go to groups.osdl.org,
which is gone. Either use the full URL (in patch) or create a new
tinyurl for this URL.
Is the web page (where I first saw this problem) generated from
this txt file?
http://www.kernel.org/pub/software/scm/git/docs/core-tutorial.html
If not, it needs to be updated also.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shawn Bohrer [Wed, 26 Sep 2007 04:12:46 +0000 (23:12 -0500)]
Fix spelling of overridden in documentation
Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Tue, 25 Sep 2007 15:43:44 +0000 (16:43 +0100)]
rebase -i: avoid exporting GIT_AUTHOR_* variables
It is somewhat unsafe to export the GIT_AUTHOR_* variables, since a later
call to git-commit or git-merge could pick them up inadvertently.
So avoid the export, using a recipe provided by Johannes Sixt.
Incidentally, this fixes authorship of merges with "rebase --preserve -i".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Tue, 25 Sep 2007 15:43:04 +0000 (16:43 +0100)]
rebase -i: Fix numbers in progress report
Instead of counting all lines in done and todo, we now count the actions
before outputting "$Rebasing ($count/$total)".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Tue, 25 Sep 2007 15:42:51 +0000 (16:42 +0100)]
rebase -i: style fixes and minor cleanups
This patch indents ";;" consistently with the rest of git's shell scripts,
and makes sure that ";;" are before each "esac".
It introduces a helper function "has_action", to make it easier to read
the intentions of the code.
Errors from "git rev-parse --verify" are no longer ignored.
Spaces are quoted using single quotes instead of a backslash, for
readability.
A "test $preserve=f" (missing spaces) was fixed; hashes are no longer
written to "$DOTEST"/rewritten/ unnecessarily.
We used to quote the message for a squash, only to have "echo" unquote it.
Now we use "printf" and do not need to quote to start with.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Tue, 25 Sep 2007 15:42:36 +0000 (16:42 +0100)]
rebase -i: commit when continuing after "edit"
When doing an "edit" on a commit, editing and git-adding some files,
"git rebase -i" complained about a missing "author-script". The idea was
that the user would call "git commit --amend" herself.
But we can be nice and do that for the user.
Noticed by Dmitry Potapov.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Tue, 25 Sep 2007 13:05:29 +0000 (15:05 +0200)]
gitattributes.txt: Be more to the point in the filter driver description.
The description was meant to emphasizes that the project should remain
usable even if the filter driver was not used. This makes it more explicit
and removes the "here is rope to hang yourself" paraphrase.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Tue, 25 Sep 2007 13:05:28 +0000 (15:05 +0200)]
gitattributes.txt: Remove a duplicated paragraph about 'ident' and 'crlf' interaction.
The order in which 'ident' and 'crlf' are carried out is documented a few paragraphs
later again, after 'filter' was introduced.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lars Hjemli [Tue, 25 Sep 2007 06:36:38 +0000 (08:36 +0200)]
Make merge-recursive honor diff.renamelimit
It might be a sign of source code management gone bad, but when two branches
has diverged almost beyond recognition and time has come for the branches to
merge, the user is going to need all the help his tool can give him. Honoring
diff.renamelimit has great potential as a painkiller in such situations.
The painkiller effect could have been achieved by e.g. 'merge.renamelimit',
but the flexibility gained by a separate option is questionable: our user
would probably expect git to detect renames equally good when merging as
when diffing (I known I did).
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matt Kraai [Tue, 25 Sep 2007 14:03:46 +0000 (07:03 -0700)]
Move convert-objects to contrib.
convert-objects was needed to convert from an old-style repository,
which hashed the compressed contents and used a different date format.
Such repositories are presumably no longer common and, if such
conversions are necessary, should be done by writing a frontend for
git-fast-import.
Linus, the original author, is OK with moving it to contrib.
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael Smith [Tue, 25 Sep 2007 12:44:38 +0000 (08:44 -0400)]
user-manual: Explain what submodules are good for.
Rework the introduction to the Submodules section to explain why
someone would use them, and fix up submodule references from the
tree-object and todo sections.
Signed-off-by: Michael Smith <msmith@cbnco.com>
Acked-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 25 Sep 2007 22:17:22 +0000 (15:17 -0700)]
Merge branch 'jn/web' into maint
* jn/web:
gitweb: No difftree output for trivial merge
gitweb: Remove parse_from_to_diffinfo code from git_patchset_body
Mark Levedahl [Mon, 24 Sep 2007 02:19:42 +0000 (22:19 -0400)]
git-submodule - allow a relative path as the subproject url
This allows a subproject's location to be specified and stored as relative
to the parent project's location (e.g., ./foo, or ../foo). This url is
stored in .gitmodules as given. It is resolved into an absolute url by
appending it to the parent project's url when the information is written
to .git/config (i.e., during submodule add for the originator, and
submodule init for a downstream recipient). This allows cloning of the
project to work "as expected" if the project is hosted on a different
server than when the subprojects were added.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 25 Sep 2007 07:30:33 +0000 (00:30 -0700)]
Merge branch 'maint'
* maint:
Do not over-quote the -f envelopesender value.
unexpected Make output (e.g. from --debug) causes build failure
Fixed minor typo in t/t9001-send-email.sh test command line.
Jim Meyering [Tue, 25 Sep 2007 06:48:59 +0000 (08:48 +0200)]
Do not over-quote the -f envelopesender value.
Without this, the value passed to sendmail would have an extra set of
single quotes. At least exim's sendmail emulation would object to that:
exim: bad -f address "'list-addr@example.org'": malformed address: ' \
may not follow 'list-addr@example.org
error: hooks/post-receive exited with error code 1
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jim Meyering [Tue, 25 Sep 2007 06:42:16 +0000 (08:42 +0200)]
unexpected Make output (e.g. from --debug) causes build failure
Without this, the extra output produced e.g., by "make --debug"
would go into $INSTLIBDIR and then cause the sed command to fail.
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Glenn Rempe [Mon, 24 Sep 2007 20:33:38 +0000 (13:33 -0700)]
Fixed minor typo in t/t9001-send-email.sh test command line.
The git-send-email command line in the test was missing a single hyphen.
Signed-off-by: Glenn Rempe <glenn@rempe.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Sperling [Mon, 24 Sep 2007 10:57:40 +0000 (12:57 +0200)]
Fix pool handling in git-svnimport to avoid memory leaks.
- Create an explicit one-and-only root pool.
- Closely follow examples in SVN::Core man page.
Before calling a subversion function, create a subpool of our
root pool and make it the new default pool.
- Create a subpool for looping over svn revisions and clear
this subpool (i.e. it mark for reuse, don't decallocate it)
at the start of the loop instead of allocating new memory
with each iteration.
See http://marc.info/?l=git&m=
118554191513822&w=2 for a detailed
explanation of the issue.
Signed-off-by: Stefan Sperling <stsp@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 24 Sep 2007 08:12:16 +0000 (01:12 -0700)]
Start RelNotes for 1.5.4
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 24 Sep 2007 06:13:08 +0000 (23:13 -0700)]
Merge branch 'jn/web'
* jn/web:
gitweb: No difftree output for trivial merge
gitweb: Remove parse_from_to_diffinfo code from git_patchset_body
Jakub Narebski [Sat, 8 Sep 2007 19:54:28 +0000 (21:54 +0200)]
gitweb: No difftree output for trivial merge
In 'commitdiff' view, for the merge commit, there is an extra header
for the difftree table, with links to commitdiffs to individual
parents. Do not show such header when there is nothing to show, for
trivial merges.
This means that for trivial merge you have to go to 'commit' view
to get links to diffs to each parent.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Jakub Narebski [Sat, 8 Sep 2007 19:49:11 +0000 (21:49 +0200)]
gitweb: Remove parse_from_to_diffinfo code from git_patchset_body
In commit
90921740bd00029708370673fdc537522aa48e6f
"gitweb: Split git_patchset_body into separate subroutines"
a part of git_patchset_body code was separated into parse_from_to_diffinfo
subroutine. But instead of replacing the separated code by the call to
mentioned subroutine, the call to subroutine was placed before the separated
code. This patch removes parse_from_to_diffinfo code from git_patchset_body
subroutine.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Junio C Hamano [Mon, 24 Sep 2007 05:51:03 +0000 (22:51 -0700)]
Merge branch 'je/hooks'
* je/hooks:
Added example hook script to save/restore permissions/ownership.
Add post-merge hook, related documentation, and tests.
Junio C Hamano [Mon, 24 Sep 2007 05:29:12 +0000 (22:29 -0700)]
git-remote rm: add tests and minor fix-ups
This fixes "git remote rm" which always exited with a failure,
corrects indentation, and adds tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 24 Sep 2007 04:16:33 +0000 (21:16 -0700)]
Merge branch 'js/apply-build-ancestor'
* js/apply-build-ancestor:
apply: get rid of --index-info in favor of --build-fake-ancestor
Junio C Hamano [Mon, 24 Sep 2007 00:13:55 +0000 (17:13 -0700)]
Merge branch 'maint'
* maint:
git-svn: don't attempt to spawn pager if we don't want one
Supplant the "while case ... break ;; esac" idiom
User Manual: add a chapter for submodules
user-manual: don't assume refs are stored under .git/refs
Detect exec bit in more cases.
Conjugate "search" correctly in the git-prune-packed man page.
Move the paragraph specifying where the .idx and .pack files should be
Documentation/git-lost-found.txt: drop unnecessarily duplicated name.
Junio C Hamano [Mon, 24 Sep 2007 00:08:45 +0000 (17:08 -0700)]
Merge branch 'maint' of git://linux-nfs.org/~bfields/git into maint
* 'maint' of git://linux-nfs.org/~bfields/git:
User Manual: add a chapter for submodules
user-manual: don't assume refs are stored under .git/refs
Eric Wong [Sat, 22 Sep 2007 01:48:45 +0000 (18:48 -0700)]
git-svn: don't attempt to spawn pager if we don't want one
Even though config_pager() unset the $pager variable, we were
blindly calling exec() on it through run_pager().
Noticed-by: Chris Moore <christopher.ian.moore@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
David Kastrup [Sun, 23 Sep 2007 20:42:08 +0000 (22:42 +0200)]
Supplant the "while case ... break ;; esac" idiom
A lot of shell scripts contained stuff starting with
while case "$#" in 0) break ;; esac
and similar. I consider breaking out of the condition instead of the
body od the loop ugly, and the implied "true" value of the
non-matching case is not really obvious to humans at first glance. It
happens not to be obvious to some BSD shells, either, but that's
because they are not POSIX-compliant. In most cases, this has been
replaced by a straight condition using "test". "case" has the
advantage of being faster than "test" on vintage shells where "test"
is not a builtin. Since none of them is likely to run the git
scripts, anyway, the added readability should be worth the change.
A few loops have had their termination condition expressed
differently.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Miklos Vajna [Thu, 20 Sep 2007 00:34:14 +0000 (02:34 +0200)]
User Manual: add a chapter for submodules
Signed-off-by: Michael Smith <msmith@cbnco.com>
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
J. Bruce Fields [Mon, 10 Sep 2007 02:07:02 +0000 (22:07 -0400)]
user-manual: don't assume refs are stored under .git/refs
The scripts taken from Tony Luck's howto assume all refs can be found
under .git/refs, but this is not necessarily true, especially since
git-gc runs git-pack-refs.
Also add a note warning of this in the chapter that introduces refs, and
fix the same incorrect assumption in one other spot.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
David Brown [Wed, 19 Sep 2007 20:12:48 +0000 (13:12 -0700)]
Detect exec bit in more cases.
git-p4 was missing the execute bit setting if the file had other attribute
bits set.
Acked-By: Simon Hausmann <simon@lst.de>
Matt Kraai [Fri, 21 Sep 2007 14:37:18 +0000 (07:37 -0700)]
Conjugate "search" correctly in the git-prune-packed man page.
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matt Kraai [Fri, 21 Sep 2007 13:43:44 +0000 (06:43 -0700)]
Move the paragraph specifying where the .idx and .pack files should be
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 21 Sep 2007 19:52:30 +0000 (12:52 -0700)]
Documentation/git-lost-found.txt: drop unnecessarily duplicated name.
I only did this back when I wanted to make sure git-log and gitk work
properly with non Occidental characters. There is really no reason to
keep it around.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sam Vilain [Fri, 21 Sep 2007 03:27:01 +0000 (15:27 +1200)]
git-svn: handle changed svn command-line syntax
Previously, if you passed a revision and a path to svn cp, it meant to look
back at that revision and select that path. New behaviour is to get the
path then go back to the revision (like other commands that accept @REV
or -rREV do). The more consistent syntax is not supported by the old
tools, so we have to try both in turn.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sam Vilain [Fri, 21 Sep 2007 02:02:34 +0000 (14:02 +1200)]
git-svn: fix test for trunk svn (transaction out of date)
Older svn clients did not raise a 'transaction out of date' error here, but
trunk does - so 'svn up'.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sam Vilain [Fri, 21 Sep 2007 02:02:33 +0000 (14:02 +1200)]
git-svn: fix test for trunk svn (commit message not needed)
The 'svn mv -m "rename to thunk"' was a local operation, therefore not
needing a commit message, it was silently ignored. Newer svn clients will
instead raise an error.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Thu, 20 Sep 2007 05:23:01 +0000 (07:23 +0200)]
rev-list --bisect: Fix best == NULL case.
Earlier commit
ce0cbad77 broke rev-list --bisect to cause it
segfault when the resulting set is empty.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 19 Sep 2007 10:21:35 +0000 (03:21 -0700)]
Merge branch 'maint' to sync with 1.5.3.2
This is an evil merge that also updates the stale document links
in Documentation/git.txt
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 19 Sep 2007 10:11:28 +0000 (03:11 -0700)]
GIT 1.5.3.2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
James Bowes [Sat, 7 Jul 2007 15:22:43 +0000 (11:22 -0400)]
remote: document the 'rm' subcommand
Signed-off-by: James Bowes <jbowes@dangerouslyinc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
James Bowes [Tue, 5 Jun 2007 23:25:23 +0000 (19:25 -0400)]
remote: add 'rm' subcommand
Introduce git-remote rm <name> which will:
- Remove the remote config entry for <name>.
- Remove any config entries for tracking branches of <name>.
- Remove any stored remote branches of <name>.
Signed-off-by: James Bowes <jbowes@dangerouslyinc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Mon, 17 Sep 2007 22:34:06 +0000 (23:34 +0100)]
apply: get rid of --index-info in favor of --build-fake-ancestor
git-am used "git apply -z --index-info" to find the original versions
of the files touched by the diff, to be able to do an inexpensive
three-way merge.
This operation makes only sense in a repository, since the index
information in the diff refers to blobs, which have to be present in
the current repository.
Therefore, teach "git apply" a mode to write out the result as an
index file to begin with, obviating the need for scripts to do it
themselves.
The sole user for --index-info is "git am" is converted to
use --build-fake-ancestor in this patch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Josh England [Tue, 11 Sep 2007 16:59:04 +0000 (10:59 -0600)]
Added example hook script to save/restore permissions/ownership.
Usage info is emebed in the script, but the gist of it is to run the script
from a pre-commit hook to save permissions/ownership data to a file and check
that file into the repository. Then, a post_merge hook reads the file and
updates working tree permissions/ownership. All updates are transparent to
the user (although there is a --verbose option). Merge conflicts are handled
in the "read" phase (in pre-commit), and the script aborts the commit and
tells you how to fix things in the case of a merge conflict in the metadata
file. This same idea could be extended to handle file ACLs or other file
metadata if desired.
Signed-off-by: Josh England <jjengla@sandia.gov>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Josh England [Tue, 11 Sep 2007 16:59:03 +0000 (10:59 -0600)]
Add post-merge hook, related documentation, and tests.
The post-merge hook enables one to hook in for `git pull` operations in order
to check and/or change attributes of a work tree from the hook. As an example,
it can be used in combination with a pre-commit hook to save/restore file
ownership and permissions data (or file ACLs) within the repository and
transparently update the working tree after a `git pull` operation.
Signed-off-by: Josh England <jjengla@sandia.gov>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 19 Sep 2007 00:39:25 +0000 (17:39 -0700)]
Merge branch 'maint'
* maint:
Fixed update-hook example allow-users format.
Documentation/git-svn: updated design philosophy notes
t/t4014: test "am -3" with mode-only change.
Fix lapsus in builtin-apply.c
git-push: documentation and tests for pushing only branches
git-svnimport: Use separate arguments in the pipe for git-rev-parse
Väinö Järvelä [Tue, 18 Sep 2007 12:26:09 +0000 (15:26 +0300)]
Fixed update-hook example allow-users format.
The example provided with the update-hook-example does not work on
either bash 2.05b.0(1)-release nor 3.1.17(1)-release. The matcher did
not match the lines that it advertised to match, such as:
refs/heads/bw/ linus
refs/heads/tmp/* *
In POSIX 1003.2 regular expressions, the star (*), is not an wildcard
meaning "match everything", it matches 0 or more matches of the atom
preceding it.
So to match "refs/heads/bw/topic-branch", the matcher should be written
as "refs/heads/bw/.*" to match "refs/heads/bw/" and everything after it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Tue, 18 Sep 2007 23:50:42 +0000 (16:50 -0700)]
Documentation/git-svn: updated design philosophy notes
This section has not been updated in a while and
--branches/--tags/--trunk options are commonly used nowadays.
Noticed-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 18 Sep 2007 22:19:47 +0000 (15:19 -0700)]
t/t4014: test "am -3" with mode-only change.
Earlier commit
ece7b74903007cee8d280573647243d46a6f3a95 added a test
for rebase that uses "am -3", but this adds a test to check "am -3"
itself.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
David Kastrup [Mon, 17 Sep 2007 20:56:44 +0000 (22:56 +0200)]
git-commit.sh: Shell script cleanup
This moves "shift" out of the argument processing "case". It also
replaces quite a bit of expr calls with ${parameter#word} constructs,
and uses ${parameter:+word} for avoiding conditionals where possible.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dmitry Potapov [Sun, 16 Sep 2007 17:07:38 +0000 (21:07 +0400)]
preserve executable bits in zip archives
Correct `git-archive --format=zip' command to preserve executable bits in
zip archives.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pierre Habouzit [Tue, 18 Sep 2007 10:12:58 +0000 (12:12 +0200)]
Fix lapsus in builtin-apply.c
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 18 Sep 2007 08:15:34 +0000 (04:15 -0400)]
git-push: documentation and tests for pushing only branches
Commit
098e711e caused git-push to match only branches when
considering which refs to push. This patch updates the
documentation accordingly and adds a test for this behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matthias Urlichs [Tue, 18 Sep 2007 09:29:09 +0000 (11:29 +0200)]
git-svnimport: Use separate arguments in the pipe for git-rev-parse
Some people seem to create SVN branch names with spaces
or other shell metacharacters.
Signed-off-by: Matthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 18 Sep 2007 07:26:27 +0000 (03:26 -0400)]
contrib/fast-import: add perl version of simple example
This is based on the git-import.sh script, but is a little
more robust and efficient. More importantly, it should
serve as a quick template for interfacing fast-import with
perl scripts.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nguyen Thai Ngoc Duy [Tue, 18 Sep 2007 07:26:01 +0000 (03:26 -0400)]
contrib/fast-import: add simple shell example
This example just puts a directory under git control. It is
significantly slower than using the git tools directly, but
hopefully shows a bit how fast-import works.
[jk: added header comments]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Mon, 17 Sep 2007 03:28:36 +0000 (05:28 +0200)]
rev-list --bisect: Bisection "distance" clean up.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Mon, 17 Sep 2007 03:28:29 +0000 (05:28 +0200)]
rev-list --bisect: Move some bisection code into best_bisection.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Mon, 17 Sep 2007 03:28:20 +0000 (05:28 +0200)]
rev-list --bisect: Move finding bisection into do_find_bisection.
This factorises some code and make a big function smaller.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 18 Sep 2007 07:42:01 +0000 (00:42 -0700)]
Merge branch 'cr/reset'
* cr/reset:
Simplify cache API
An additional test for "git-reset -- path"
Make "git reset" a builtin.
Move make_cache_entry() from merge-recursive.c into read-cache.c
Add tests for documented features of "git reset".
Junio C Hamano [Tue, 18 Sep 2007 07:41:43 +0000 (00:41 -0700)]
Merge branch 'maint'
* maint:
Document ls-files --with-tree=<tree-ish>
git-commit: partial commit of paths only removed from the index
git-commit: Allow partial commit of file removal.
send-email: make message-id generation a bit more robust
git-gui: Disable native platform text selection in "lists"
git-gui: Paper bag fix "Commit->Revert" format arguments
git-gui: Provide 'uninstall' Makefile target to undo an installation
git-gui: Font chooser to handle a large number of font families
git-gui: Make backporting changes from i18n version easier
git-gui: Don't delete send on Windows as it doesn't exist
git-gui: Trim trailing slashes from untracked submodule names
git-gui: Assume untracked directories are Git submodules
git-gui: handle "deleted symlink" diff marker
git-gui: show unstaged symlinks in diff viewer
git-gui: Avoid use of libdir in Makefile
git-gui: Disable Tk send in all git-gui sessions
git-gui: lib/index.tcl: handle files with % in the filename properly
git-gui: Properly set the state of "Stage/Unstage Hunk" action
git-gui: Fix detaching current branch during checkout
git-gui: Correct starting of git-remote to handle -w option
Junio C Hamano [Fri, 14 Sep 2007 23:59:04 +0000 (16:59 -0700)]
Document ls-files --with-tree=<tree-ish>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 14 Sep 2007 23:53:58 +0000 (16:53 -0700)]
git-commit: partial commit of paths only removed from the index
Because a partial commit is meant to be a way to ignore what are
staged in the index, "git rm --cached A && git commit A" should
just record what is in A on the filesystem. The previous patch
made the command sequence to barf, saying that A has not been
added yet. This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 12 Sep 2007 23:04:22 +0000 (16:04 -0700)]
git-commit: Allow partial commit of file removal.
When making a partial commit, git-commit uses git-ls-files with
the --error-unmatch option to expand and sanity check the user
supplied path patterns. When any path pattern does not match
with the paths known to the index, it errors out, in order to
catch a common mistake to say "git commit Makefiel cache.h"
and end up with a commit that touches only cache.h (notice the
misspelled "Makefile"). This detection however does not work
well when the path has already been removed from the index.
If you drop a path from the index and try to commit that
partially, i.e.
$ git rm COPYING
$ git commit -m 'Remove COPYING' COPYING
the command complains because git does not know anything about
COPYING anymore.
This introduces a new option --with-tree to git-ls-files and
uses it in git-commit when we build a temporary index to
write a tree object for the partial commit.
When --with-tree=<tree-ish> option is specified, names from the
given tree are added to the set of names the index knows about,
so we can treat COPYING file in the example as known.
Of course, there is no reason to use "git rm" and git-aware
people have long time done:
$ rm COPYING
$ git commit -m 'Remove COPYING' COPYING
which works just fine. But this caused a constant confusion.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 18 Sep 2007 06:56:40 +0000 (23:56 -0700)]
Merge branch 'jc/grep-c' into maint
* jc/grep-c:
Split grep arguments in a way that does not requires to add /dev/null.
Junio C Hamano [Tue, 18 Sep 2007 06:50:17 +0000 (23:50 -0700)]
Merge branch 'maint' of git://repo.or.cz/git-gui into maint
* 'maint' of git://repo.or.cz/git-gui:
git-gui: Disable native platform text selection in "lists"
git-gui: Paper bag fix "Commit->Revert" format arguments
git-gui: Provide 'uninstall' Makefile target to undo an installation
git-gui: Font chooser to handle a large number of font families
git-gui: Make backporting changes from i18n version easier
git-gui: Don't delete send on Windows as it doesn't exist
git-gui: Trim trailing slashes from untracked submodule names
git-gui: Assume untracked directories are Git submodules
git-gui: handle "deleted symlink" diff marker
git-gui: show unstaged symlinks in diff viewer
git-gui: Avoid use of libdir in Makefile
git-gui: Disable Tk send in all git-gui sessions
git-gui: lib/index.tcl: handle files with % in the filename properly
git-gui: Properly set the state of "Stage/Unstage Hunk" action
git-gui: Fix detaching current branch during checkout
git-gui: Correct starting of git-remote to handle -w option
Junio C Hamano [Tue, 18 Sep 2007 04:18:20 +0000 (21:18 -0700)]
send-email: make message-id generation a bit more robust
Earlier code took Unix time and appended a few random digits.
If you are firing off many messages within a second, you could
issue the same id to different messages, which is a no-no. If
you send out 31 messages within a single second, with random
integer taken out of rand(4200), you have about 10% chance of
producing the same message ID.
This fixes the problem by uses a prefix string which is
constant-per-invocation (time and pid), with a serial number for
each message generated by the process appended at the end.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 17 Sep 2007 09:21:43 +0000 (02:21 -0700)]
Merge branch 'maint'
* maint:
git-apply: fix whitespace stripping
apply --index-info: fall back to current index for mode changes
core-tutorial: minor cleanup
documentation: replace Discussion section by link to user-manual chapter
user-manual: todo updates and cleanup
user-manual: fix introduction to packfiles
user-manual: move packfile and dangling object discussion
user-manual: rewrite object database discussion
user-manual: reorder commit, blob, tree discussion
user-manual: rewrite index discussion
user-manual: create new "low-level git operations" chapter
user-manual: rename "git internals" to "git concepts"
user-manual: move object format details to hacking-git chapter
user-manual: adjust section levels in "git internals"
revision walker: --cherry-pick is a limited operation
git-sh-setup: typofix in comments
J. Bruce Fields [Sun, 16 Sep 2007 22:49:00 +0000 (18:49 -0400)]
git-apply: fix whitespace stripping
The algorithm isn't right here: it accumulates any set of 8 spaces into
tabs even if they're separated by tabs, so
<four spaces><tab><four spaces><tab>
is converted to
<tab><tab><tab>
when it should be just
<tab><tab>
So teach git-apply that a tab hides any group of less than 8 previous
spaces in a row.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shawn O. Pearce [Mon, 17 Sep 2007 03:12:19 +0000 (23:12 -0400)]
git-gui: Disable native platform text selection in "lists"
Sometimes we use a Tk text widget as though it were a listbox.
This happens typically when we want to show an icon to the left
of the text label or just when a text widget is generally a better
choice then the native listbox widget.
In these cases if we want the user to have control over the selection
we implement our own "in_sel" tag that shows the selected region
and we perform our own selection management in the background
via keybindings and mouse bindings. In such uses we don't want
the user to be able to activate the native platform selection by
dragging their mouse through the text widget. Doing so creates a
very confusing display and the user is left wondering what it may
mean to have two different types of selection in the same widget.
Tk doesn't allow us to delete the "sel" tag that it uses internally
to manage the native selection but it will allow us to make it
invisible by setting the tag to have the same display properties
as unselected text. So long as we don't actually use the "sel"
tag for anything in code its effectively invisible.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Schindelin [Mon, 17 Sep 2007 00:24:57 +0000 (01:24 +0100)]
apply --index-info: fall back to current index for mode changes
"git diff" does not record index lines for pure mode changes (i.e. no
lines changed). Therefore, apply --index-info would call out a bogus
error.
Instead, fall back to reading the info from the current index.
Incidentally, this fixes an error where git-rebase would not rebase a
commit including a pure mode change, and changes requiring a threeway
merge.
Noticed and later tested by Chris Shoemaker.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 16 Sep 2007 06:18:05 +0000 (23:18 -0700)]
Merge branch 'maint' of git://linux-nfs.org/~bfields/git into maint
* 'maint' of git://linux-nfs.org/~bfields/git:
core-tutorial: minor cleanup
documentation: replace Discussion section by link to user-manual chapter
user-manual: todo updates and cleanup
user-manual: fix introduction to packfiles
user-manual: move packfile and dangling object discussion
user-manual: rewrite object database discussion
user-manual: reorder commit, blob, tree discussion
user-manual: rewrite index discussion
user-manual: create new "low-level git operations" chapter
user-manual: rename "git internals" to "git concepts"
user-manual: move object format details to hacking-git chapter
user-manual: adjust section levels in "git internals"
J. Bruce Fields [Mon, 3 Sep 2007 14:34:27 +0000 (10:34 -0400)]
core-tutorial: minor cleanup
Revise the introduction for concision, add pointers to the tutorial and
user manual as appropriate, delete cvsimport note from the end, as that
work's been done elsewhere already.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
J. Bruce Fields [Mon, 3 Sep 2007 04:01:19 +0000 (00:01 -0400)]
documentation: replace Discussion section by link to user-manual chapter
The "Discussion" section has a lot of useful information, but is a
little wordy, especially for an already-long man page, and is designed
for an audience more of potential git hackers than users, which probably
doesn't make as much sense as git matures. Also, I (perhaps foolishly)
forked a version in the user manual, which has been significantly
rewritten in an attempt to address some of the above problems.
So, remove this section and replace it by a (very terse) summary of the
original material--my attempt at the World's Shortest Git Overview--and
a reference to the appropriate chapter of the user manual. It's
unfortunate to remove something that's been in this place for a long
time, as some people may still depend on finding it there. But I think
we'll want to do this some day anyway.
Cc: Andreas Ericsson <ae@op5.se>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>