Martin Langhoff [Tue, 9 Jan 2007 02:10:41 +0000 (15:10 +1300)]
cvsserver: fix revision number during file adds
With this patch, cvs add / cvs commit echoes back to the client
the correct file version (1.1) so that the file in the checkout
is recognised as up-to-date.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Martin Langhoff [Tue, 9 Jan 2007 02:10:32 +0000 (15:10 +1300)]
cvsserver: detect early of we are up to date and avoid costly rev-list
if the SHA1 of our head matches the last SHA1 seen in the DB, avoid further
processing.
[jc: an "Oops, please amend" patch rolled in]
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
J. Bruce Fields [Tue, 9 Jan 2007 04:28:51 +0000 (23:28 -0500)]
Documentation: add git-remote man page
Add a preliminary man page for git-remote.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 8 Jan 2007 23:56:51 +0000 (15:56 -0800)]
Merge branch 'jc/reflog'
* jc/reflog:
reflog --fix-stale: do not check the same trees and commits repeatedly.
reflog expire --fix-stale
Move traversal of reachable objects into a separate library.
builtin-prune: separate ref walking from reflog walking.
builtin-prune: make file-scope static struct to an argument.
Andy Whitcroft [Mon, 8 Jan 2007 15:58:38 +0000 (15:58 +0000)]
short i/o: fix config updates to use write_in_full
We need to check that the writes we perform during the update of
the users configuration work. Convert to using write_in_full().
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Andy Whitcroft [Mon, 8 Jan 2007 15:58:23 +0000 (15:58 +0000)]
short i/o: fix calls to write to use xwrite or write_in_full
We have a number of badly checked write() calls. Often we are
expecting write() to write exactly the size we requested or fail,
this fails to handle interrupts or short writes. Switch to using
the new write_in_full(). Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xwrite().
Note, the changes to config handling are much larger and handled
in the next patch in the sequence.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Andy Whitcroft [Mon, 8 Jan 2007 15:58:08 +0000 (15:58 +0000)]
short i/o: fix calls to read to use xread or read_in_full
We have a number of badly checked read() calls. Often we are
expecting read() to read exactly the size we requested or fail, this
fails to handle interrupts or short reads. Add a read_in_full()
providing those semantics. Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xread().
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Andy Whitcroft [Mon, 8 Jan 2007 15:57:52 +0000 (15:57 +0000)]
short i/o: clean up the naming for the write_{in,or}_xxx family
We recently introduced a write_in_full() which would either write
the specified object or emit an error message and fail. In order
to fix the read side we now want to introduce a read_in_full()
but without an error emit. This patch cleans up the naming
of this family of calls:
1) convert the existing write_or_whine() to write_or_whine_pipe()
to better indicate its pipe specific nature,
2) convert the existing write_in_full() calls to write_or_whine()
to better indicate its nature,
3) introduce a write_in_full() providing a write or fail semantic,
and
4) convert write_or_whine() and write_or_whine_pipe() to use
write_in_full().
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 8 Jan 2007 22:40:33 +0000 (14:40 -0800)]
--prune is now default for 'pack-refs'
There is no reason not to, really.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 8 Jan 2007 21:59:15 +0000 (13:59 -0800)]
--utf8 is now default for 'git-am'
Since we are talking about allowing potentially incompatible UI
changes in v1.5.0 iff the change improves the general situation,
I would say why not.
There is --no-utf8 flag to avoid re-coding from botching the log
message just in case, but we may not even need it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Michael Loeffler [Mon, 8 Jan 2007 19:23:13 +0000 (20:23 +0100)]
git-commit: do not fail to print the diffstat even if there is a file named HEAD
Signed-off-by: Michael Loeffler <zvpunry@zvpunry.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Andy Whitcroft [Mon, 8 Jan 2007 11:45:44 +0000 (11:45 +0000)]
ssh-upload: prevent buffer overrun
Prevent a client from overrunning the on stack ref buffer.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Martin Langhoff [Mon, 8 Jan 2007 08:08:46 +0000 (21:08 +1300)]
cvsimport: cleanup temporary cvsps file
It is bad manners to leave these sizable files
around when we are done with them.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Martin Langhoff [Mon, 8 Jan 2007 06:53:03 +0000 (19:53 +1300)]
cvsimport: document -S and -L options
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Martin Langhoff [Mon, 8 Jan 2007 06:43:39 +0000 (19:43 +1300)]
cvsimport: skip commits that are too recent (option and documentation)
This makes the earlier "wait for 10 minutes before importing" safety
overridable with "-a(ll)" flag, and adds necessary documentation.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Mon, 8 Jan 2007 03:35:41 +0000 (19:35 -0800)]
git-svn: pass an unambiguous ref to rev-list when grafting-branches
Some users apparently create local heads with the same basename
as the remote branch they're tracking.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Mon, 8 Jan 2007 03:35:40 +0000 (19:35 -0800)]
git-svn: add --prefix= option to multi-init
Also, document --{trunk,branches,tags} options while we're
documenting multi-init options.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
J. Bruce Fields [Mon, 8 Jan 2007 00:25:35 +0000 (19:25 -0500)]
Documentation: clarify definition of "reachable"
Clarify definition of "reachable" (what chain?)
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Sasha Khapyorsky [Mon, 8 Jan 2007 02:22:42 +0000 (04:22 +0200)]
git-svnimport: fix edge revisions double importing
This fixes newly introduced bug when the incremental cycle edge revisions
are imported twice.
Signed-off-by: Sasha Khapyorsky <sashak@voltaire.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Martin Langhoff [Mon, 8 Jan 2007 01:11:23 +0000 (14:11 +1300)]
cvsimport: skip commits that are too recent
With this patch, cvsimport will skip commits made
in the last 10 minutes. The recent-ness test is of
5 minutes + cvsps fuzz window (5 minutes default).
When working with a CVS repository that is in use,
importing commits that are too recent can lead to
partially incorrect trees. This is mainly due to
- Commits that are within the cvsps fuzz window may later
be found to have affected more files.
- When performing incremental imports, clock drift between
the systems may lead to skipped commits.
This commit helps keep incremental imports of in-use
CVS repositories sane.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Mon, 8 Jan 2007 01:10:42 +0000 (02:10 +0100)]
gitweb: Remove superfluous "|" in "commit" view
Remove superfluous trailing "|" separator from difftree part of "commit"
view for new files (created in given commit).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jürgen Rühle [Sun, 7 Jan 2007 19:18:26 +0000 (20:18 +0100)]
Remove unnecessary git-rm --cached reference from status output
Since git-reset has learned restoring the absence of paths git-rm --cached is
no longer necessary. Therefore remove it from the cached content header hint.
Also remove the unfortunate wording 'Cached' from the header itself.
Signed-off-by: Jürgen Rühle <j-r@online.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Nicolas Pitre [Sun, 7 Jan 2007 17:31:29 +0000 (12:31 -0500)]
"init-db" can really be just "init"
Make "init" the equivalent of "init-db". This should make first GIT
impression a little more friendly.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sun, 7 Jan 2007 08:12:47 +0000 (00:12 -0800)]
Merge branch 'sp/mmap'
* sp/mmap: (27 commits)
Spell default packedgitlimit slightly differently
Increase packedGit{Limit,WindowSize} on 64 bit systems.
Update packedGit config option documentation.
mmap: set FD_CLOEXEC for file descriptors we keep open for mmap()
pack-objects: fix use of use_pack().
Fix random segfaults in pack-objects.
Cleanup read_cache_from error handling.
Replace mmap with xmmap, better handling MAP_FAILED.
Release pack windows before reporting out of memory.
Default core.packdGitWindowSize to 1 MiB if NO_MMAP.
Test suite for sliding window mmap implementation.
Create pack_report() as a debugging aid.
Support unmapping windows on 'temporary' packfiles.
Improve error message when packfile mmap fails.
Ensure core.packedGitWindowSize cannot be less than 2 pages.
Load core configuration in git-verify-pack.
Fully activate the sliding window pack access.
Unmap individual windows rather than entire files.
Document why header parsing won't exceed a window.
Loop over pack_windows when inflating/accessing data.
...
Conflicts:
cache.h
pack-check.c
Junio C Hamano [Sun, 7 Jan 2007 08:11:11 +0000 (00:11 -0800)]
Spell default packedgitlimit slightly differently
This is shorter and easier to read, and also makes sure the
constant expression does not overflow integer range.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sun, 7 Jan 2007 07:49:24 +0000 (23:49 -0800)]
Merge branch 'jr/status'
* jr/status:
Improve cached content header of status output
Support --amend on initial commit in status output
Improve "nothing to commit" part of status output
Clarify syntax and role of git-add in status output
Junio C Hamano [Sun, 7 Jan 2007 07:49:16 +0000 (23:49 -0800)]
Merge branch 'jc/remote'
* jc/remote:
git-remote
Junio C Hamano [Fri, 5 Jan 2007 09:38:56 +0000 (01:38 -0800)]
git-reset <tree> -- <path> restores absense of <path> in <tree>
When <path> exists in the index (either merged or unmerged), and
<tree> does not have it, git-reset should be usable to restore
the absense of it from the tree. This implements it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Fri, 5 Jan 2007 09:25:18 +0000 (01:25 -0800)]
diff-index --cached --raw: show tree entry on the LHS for unmerged entries.
This updates the way diffcore represents an unmerged pair
somewhat. It used to be that entries with mode=0 on both sides
were used to represent an unmerged pair, but now it has an
explicit flag. This is to allow diff-index --cached to report
the entry from the tree when the path is unmerged in the index.
This is used in updating "git reset <tree> -- <path>" to restore
absense of the path in the index from the tree.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sun, 7 Jan 2007 06:32:41 +0000 (22:32 -0800)]
reflog --fix-stale: do not check the same trees and commits repeatedly.
Since we use the reachability tracking machinery now, we should
keep the already checked trees and commits whose completeness is
known, to avoid checking the same thing over and over again.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 6 Jan 2007 10:16:19 +0000 (02:16 -0800)]
reflog expire --fix-stale
The logic in an earlier round to detect reflog entries that
point at a broken commit was not sufficient. Just like we do
not trust presense of a commit during pack transfer (we trust
only our refs), we should not trust a commit's presense, even if
the tree of that commit is complete.
A repository that had reflog enabled on some of the refs that
was rewound and then run git-repack or git-prune from older
versions of git can have reflog entries that point at a commit
that still exist but lack commits (or trees and blobs needed for
that commit) between it and some commit that is reachable from
one of the refs.
This revamps the logic -- the definition of "broken commit"
becomes: a commit that is not reachable from any of the refs and
there is a missing object among the commit, tree, or blob
objects reachable from it that is not reachable from any of the
refs. Entries in the reflog that refer to such a commit are
expired.
Since this computation involves traversing all the reachable
objects, i.e. it has the same cost as 'git prune', it is enabled
only when a new option --fix-stale. Fortunately, once this is
run, we should not have to ever worry about missing objects,
because the current prune and pack-objects know about reflogs
and protect objects referred by them.
Unfortunately, this will be absolutely necessary to help people
migrate to the newer prune and repack.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 6 Jan 2007 10:16:17 +0000 (02:16 -0800)]
Move traversal of reachable objects into a separate library.
This moves major part of builtin-prune into a separate file,
reachable.c. It is used to mark the objects that are reachable
from refs, and optionally from reflogs.
The patch looks very large, but if you look at it with diff -C,
which this message is formatted in, most of them are copied
lines and there are very little additions.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 6 Jan 2007 10:16:14 +0000 (02:16 -0800)]
builtin-prune: separate ref walking from reflog walking.
This is necessary for the next step, because the reason I am
making the connectivity walker into a library is because I want
to use it for cleaning up stale reflog entries.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 6 Jan 2007 10:16:10 +0000 (02:16 -0800)]
builtin-prune: make file-scope static struct to an argument.
I want to make the first part of 'git prune' that marks the
reachable objects callable as a library, so this starts the
first step toward the goal by making the callchain to pass
rev_info structure as an argument.
No functionality change should be in this step.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Sun, 7 Jan 2007 01:52:27 +0000 (02:52 +0100)]
gitweb: Fix split patches output (e.g. file to symlink)
Do not replace /dev/null in two-line from-file/to-file diff header for
split patches ("split" patch mean more than one patch per one
diff-tree raw line) by a/file or b/file link.
Split patches differ from pair of deletion/creation patch in git diff
header: both a/file and b/file are hyperlinks, in all patches in a
split.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Sun, 7 Jan 2007 01:52:26 +0000 (02:52 +0100)]
Revert "gitweb: There can be empty patches (in git_patchset_body)"
This reverts commit
1ebb948f656c03a5bdaab4de1a113b9ffcb98bea,
as that patch quieted warning but was not proper solution.
The previous commit was.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Sun, 7 Jan 2007 01:52:25 +0000 (02:52 +0100)]
gitweb: Fix errors in git_patchset_body for empty patches
We now do not skip over empty patches in git_patchset_body (where
empty means that they consist only of git diff header, and of extended
diff header, for example "pure rename" patch). This means that after
extended diff header there can be next patch (i.e. /^diff /) or end of
patchset, and not necessary patch body (i.e. /^--- /).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Sun, 7 Jan 2007 01:52:24 +0000 (02:52 +0100)]
gitweb: Fix error in "rename to"/"copy to" git diff header output
Fix error in git_patchset_body subroutine, which caused "rename to"/"copy
to" line in extended diff header to be displayed incorrectly.
While at it, fix align.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Sun, 7 Jan 2007 01:52:23 +0000 (02:52 +0100)]
gitweb: Fix error in git_patchest_body for file creation/deletion patch
$from_id, $to_id variables should be local per PATCH.
Fix error in git_patchset_body for file creation (deletion) patches,
where instead of /dev/null as from-file (to-file) diff header line, it
had link to previous file with current file name. This error occured
only if there was another patch before file creation (deletion) patch.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Sun, 7 Jan 2007 06:25:55 +0000 (22:25 -0800)]
git-svn: fix show-ignore
Looks like I broke it in
747fa12cef73b6ca04fffaddaad7326cf546cdea
but never noticed.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
J. Bruce Fields [Sun, 7 Jan 2007 03:38:38 +0000 (22:38 -0500)]
Documentation: tutorial editing
Edit for conciseness.
Add a "Making changes" section header.
When possible, make sure that stuff in text boxes could be entered literally.
(Don't use "..." unless we want a user to type that.)
Move 'commit -a' example into a literal code section, clarify that it finds
modified files automatically.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Sun, 7 Jan 2007 01:53:40 +0000 (17:53 -0800)]
Documentation/git-svn: clarify dcommit, rebase vs pull/merge
Clarify that dcommit creates a revision in SVN for every commit
in git. Also, add 'merge' to the rebase vs pull section because
git-merge is now a first-class UI.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Sasha Khapyorsky [Sun, 7 Jan 2007 00:22:10 +0000 (02:22 +0200)]
git-svnimport: clean svn path when accessing SVN repo
Clean svn path from leading '/' when accessing SVN repo.
Signed-off-by: Sasha Khapyorsky <sashak@voltaire.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Sasha Khapyorsky [Sun, 7 Jan 2007 00:17:19 +0000 (02:17 +0200)]
git-svnimport: support for incremental import
This adds ability to do import "in chunks" (default 1000 revisions),
after each chunk git repo will be repacked. The option -R is used to
change default value of chunk size (or how often repository will
repacked).
Signed-off-by: Sasha Khapyorsky <sashak@voltaire.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Alexandre Julliard [Sat, 6 Jan 2007 13:46:47 +0000 (14:46 +0100)]
git.el: Avoid setting font lock keywords before entering log-edit mode.
Instead, reinitialize the keywords after the fact. This avoids
conflicts with other users of log-edit mode, like pcl-cvs.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fredrik Kuivinen [Sat, 6 Jan 2007 10:40:06 +0000 (11:40 +0100)]
instaweb: Nicer error message when the http daemon isn't found
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Alexandre Julliard [Sat, 6 Jan 2007 10:20:57 +0000 (11:20 +0100)]
git.el: Don't use --info-only when resolving a file.
It doesn't make a difference for git.el, but it helps when interacting
with git-rebase and friends.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Alexandre Julliard [Sat, 6 Jan 2007 10:19:44 +0000 (11:19 +0100)]
git-clean: Fix the -q option.
The 'quiet' flag is set by -q, but it's not used anywhere.
Remove it and set the 'echo1' variable instead.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Steven Grimm [Sat, 6 Jan 2007 03:14:04 +0000 (19:14 -0800)]
Print a more accurate error message when we fail to create a lock file.
Signed-off-by: Steven Grimm <koreth@midwinter.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Steven Grimm [Sat, 6 Jan 2007 01:52:20 +0000 (17:52 -0800)]
Describe git-clone's actual behavior in the summary
If a branch other than "master" is checked out in the origin repository,
git-clone makes a local copy of that branch rather than the origin's
"master"
branch. This patch describes the actual behavior.
Signed-off-by: Steven Grimm <koreth@midwinter.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
René Scharfe [Fri, 5 Jan 2007 22:30:22 +0000 (23:30 +0100)]
Set default "tar" umask to 002 and owner.group to root.root
In order to make the generated tar files more friendly to users who
extract them as root using GNU tar and its implied -p option, change
the default umask to 002 and change the owner name and group name to
root. This ensures that a) the extracted files and directories are
not world-writable and b) that they belong to user and group root.
Before they would have been assigned to a user and/or group named
git if it existed. This also answers the question in the removed
comment: uid=0, gid=0, uname=root, gname=root is exactly what we
want.
Normal users who let tar apply their umask while extracting are
only affected if their umask allowed the world to change their
files (e.g. a umask of zero). This case is so unlikely and strange
that we don't need to support it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Fri, 5 Jan 2007 03:28:08 +0000 (22:28 -0500)]
Increase packedGit{Limit,WindowSize} on 64 bit systems.
If we have a 64 bit address space we can easily afford to commit
a larger amount of virtual address space to pack file access.
So on these platforms we should increase the default settings of
core.packedGit{Limit,WindowSize} to something that will better
handle very large projects.
Thanks to Andy Whitcroft for pointing out that we can safely
increase these defaults on such systems.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 6 Jan 2007 10:16:07 +0000 (02:16 -0800)]
Fix timestamp for test-tick
The earlier test timestamp was too old; I forgot that the bare
unixtime integer had to be after Jan 1, 2000. This changes
test_tick to use the git-epoch timestamp.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Fri, 5 Jan 2007 21:31:43 +0000 (13:31 -0800)]
builtin-prune: memory diet.
Somehow we forgot to turn save_commit_buffer off while walking
the reachable objects. Releasing the memory for commit object
data that we do not use matters for large projects (for example,
about 90MB is saved while traversing linux-2.6 history).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 3 Jan 2007 20:13:04 +0000 (12:13 -0800)]
git-remote
It might be handy to have a single command that helps you manage
your configuration that relates to downloading from remote
repositories. This currently does only about 20% of what I want
it to do.
$ git remote
shows the list of 'remotes' you have defined somewhere, and
$ git remote origin
shows the details about the named remote (in this case
"origin"). How the branches are tracked, if you have a
tracking branch that is stale, etc.
$ git add another git://git.kernel.org/pub/...
defines the default remote.another.url and remote.another.fetch
entries just like a clone does; you can say "git fetch another"
afterwards.
For it to be useful, I think it should be enhanced to:
- check overlaps of tracking branches and warn;
- offer to remove stale tracking branches in one go;
- offer ways to remove or rename remote;
- offer ways to update an existing remote, perhaps have an
interactive mode;
Other enhancements might be also possible, but I do not think of
anything that is absolutely necessary other than the above right
now.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Luben Tuikov [Fri, 5 Jan 2007 02:37:45 +0000 (18:37 -0800)]
Blame "linenr" link jumps to previous state at "orig_lineno"
Blame currently displays the commit id which introduced a
block of one or more lines, the line numbers wrt the current
listing of the file and the file's line contents.
The commit id displayed is hyperlinked to the commit.
Currently the linenr links are hyperlinked to the same
commit id displayed to the left, which is _no_ different
than the block of lines displayed, since it is the _same
commit_ that is hyperlinked. And thus clicking on it leads
to the same state of the file for that chunk of
lines. I.e. data mining is not currently possible with
gitweb given a chunk of lines introduced by a commit.
This patch makes such data mining possible.
The line numbers are now hyperlinked to the parent of the
commit id of the block of lines. Furthermore they are
linked to the line where that block was introduced.
Thus clicking on a linenr link will show you the file's
line(s) state prior to the commit id you were viewing.
So clicking continually on a linenr link shows you how this
line and its line number changed over time, leading to the
initial commit where it was first introduced.
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Wed, 3 Jan 2007 21:54:29 +0000 (22:54 +0100)]
gitweb: Fix "Use of uninitialized value" warning in git_tags_body
Fix "Use of uninitialized value" warning in git_tags_body generated
for lightweight tags of tree and blob object; those don't have age
($tag{'age'}) defined.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Fri, 5 Jan 2007 02:09:56 +0000 (18:09 -0800)]
git-svn: make --repack work consistently between fetch and multi-fetch
Since fetch reforks itself at most every 1000 revisions, we
need to update the counter in the parent process to have a
working count if we set our repack interval to be > ~1000
revisions. multi-fetch has always done this correctly
because of an extra process; now fetch uses the extra process;
as well.
While we're at it, only compile the $sha1 regex that checks for
repacking once.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Fri, 5 Jan 2007 02:04:06 +0000 (18:04 -0800)]
git-svn: update documentation for multi-{init|fetch}
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Fri, 5 Jan 2007 02:02:00 +0000 (18:02 -0800)]
git-svn: make multi-init less confusing
It now requires at least one of the (trunk|branch|tags) arguments
(either from the command-line or in .git/config). Also we make
sure that anything that is passed as a URL ('help') in David's
case is actually a URL.
Thanks to David Kågedal for reporting this issue.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
René Scharfe [Thu, 4 Jan 2007 18:33:36 +0000 (19:33 +0100)]
Remove shadowing variable from traverse_trees()
The variable named entry is allocated using malloc() and then
forgotten, it being shadowed by an automatic variable of the
same name. Fixing the array size at 3 worked so far because
the only caller of traverse_trees() needed only as much
entries. Simply remove the shadowing varaible and we're able
to traverse more than three trees and save stack space at the
same time!
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
René Scharfe [Thu, 4 Jan 2007 18:33:48 +0000 (19:33 +0100)]
Make check target depend on common-cmds.h
This fixes sparse complaining about a missing include file
if 'make check' is run on clean sources.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Thu, 4 Jan 2007 08:06:50 +0000 (00:06 -0800)]
rerere: Fix removal of already resolved path.
There was an obvious thinko in memmove() to remove an entry that
was resolved from the in-core data structure.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Fri, 5 Jan 2007 06:28:21 +0000 (22:28 -0800)]
Merge branch 'maint'
* maint:
pack-check.c::verify_packfile(): don't run SHA-1 update on huge data
Fix infinite loop when deleting multiple packed refs.
Junio C Hamano [Thu, 4 Jan 2007 07:09:08 +0000 (23:09 -0800)]
pack-check.c::verify_packfile(): don't run SHA-1 update on huge data
Running the SHA1_Update() on the whole packfile in a single call
revealed an overflow problem we had in the SHA-1 implementation
on POWER architecture some time ago, which was fixed with commit
b47f509b (June 19, 2006). Other SHA-1 implementations may have
a similar problem.
The sliding mmap() series already makes chunked calls to
SHA1_Update(), so this patch itself will become moot when it
graduates to "master", but in the meantime, run the hash
function in smaller chunks to prevent possible future problems.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Robert Fitzsimons [Wed, 3 Jan 2007 20:25:55 +0000 (20:25 +0000)]
gitweb: Fix shortlog only showing HEAD revision.
My change in
190d7fdcf325bb444fa806f09ebbb403a4ae4ee6 had a small bug
found by Michael Krufky which caused the passed in hash value to be
ignored, so shortlog would only show the HEAD revision.
Signed-off-by: Robert Fitzsimons <robfitz@273k.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 3 Jan 2007 20:34:20 +0000 (12:34 -0800)]
git-verify-tag: make sure we remove temporary file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Santi Béjar [Wed, 3 Jan 2007 12:59:00 +0000 (13:59 +0100)]
git-tag: add flag to verify a tag
This way "git tag -v $tag" is the UI for git-verify-tag.
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Lars Hjemli [Wed, 3 Jan 2007 20:10:09 +0000 (21:10 +0100)]
Refactor print-functions in builtin-branch
This moves the guts of print_ref_list() into a revamped print_ref_info(),
which at the same time gets renamed to print_ref_item().
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Wed, 3 Jan 2007 19:47:25 +0000 (20:47 +0100)]
gitweb: There can be empty patches (in git_patchset_body)
We now do not skip over empty patches in git_patchset_body
(where empty means that they consist only of git diff header,
and of extended diff header), so uncomment branch of code dealing
with empty patches (patches which do not have even two-line
from/to header)
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Wed, 3 Jan 2007 19:47:24 +0000 (20:47 +0100)]
gitweb: Fix bug in git_difftree_body (was '!=' instead of 'ne')
Fix bug in git_difftree_body subroutine; it was used '!=' comparison
operator for strings (file type) instead of correct 'ne'.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Santi Béjar [Wed, 3 Jan 2007 12:53:27 +0000 (13:53 +0100)]
Documentation/tutorial: misc updates
- Teach how to delete a branch with "git branch -d name".
- Usually a commit has one parent; merge has more.
- Teach "git show" instead of "git cat-file -p".
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 3 Jan 2007 16:38:01 +0000 (08:38 -0800)]
tutorial: misc updates.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Lars Hjemli [Wed, 3 Jan 2007 13:34:13 +0000 (14:34 +0100)]
Skip excessive blank lines before commit body
This modifies pretty_print_commit() to make the output of git-rev-list and
friends a bit more predictable.
A commit body starting with blank lines might be unheard-of, but still possible
to create using git-commit-tree (so is bound to appear somewhere, sometime).
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Brian Gernhardt [Wed, 3 Jan 2007 15:36:29 +0000 (10:36 -0500)]
Add documentation for git-branch's color configuration.
Added color.branch and color.branch.<slot> to configuration list.
Style copied from color.status and meanings derived from the code.
Moved the color meanings from color.diff.<slot> to color.branch.<slot>
since the latter comes first alphabetically.
Added --color and --no-color to git-branch's usage and documentation.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Wed, 3 Jan 2007 15:03:01 +0000 (16:03 +0100)]
gitweb: Fix error in git_project_index subroutine
Instead of "$projectroot/$pr->{'path'}" to get the path to project
GIT_DIR, it was used "$projectroot/$project" which is valid only
for actions where project parameter is set, and 'project_index' is not
one of them.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 2 Jan 2007 19:19:05 +0000 (11:19 -0800)]
Fix infinite loop when deleting multiple packed refs.
It was stupid to link the same element twice to lock_file_list
and end up in a loop, so we certainly need a fix.
But it is not like we are taking a lock on multiple files in
this case. It is just that we leave the linked element on the
list even after commit_lock_file() successfully removes the
cruft.
We cannot remove the list element in commit_lock_file(); if we
are interrupted in the middle of list manipulation, the call to
remove_lock_file_on_signal() will happen with a broken list
structure pointed by lock_file_list, which would cause the cruft
to remain, so not removing the list element is the right thing
to do. Instead we should be reusing the element already on the
list.
There is already a code for that in lock_file() function in
lockfile.c. The code checks lk->next and the element is linked
only when it is not already on the list -- which is incorrect
for the last element on the list (which has NULL in its next
field), but if you read the check as "is this element already on
the list?" it actually makes sense. We do not want to link it
on the list again, nor we would want to set up signal/atexit
over and over.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jürgen Rühle [Tue, 2 Jan 2007 19:26:21 +0000 (20:26 +0100)]
Improve cached content header of status output
This tries to be more to the point while also including a pointer on how to
unstage changes from the index.
Since this header is printed in two different code paths and the name of the
reference commit is needed for the unstage part, provide a new printing
function.
Signed-off-by: Jürgen Rühle <j-r@online.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jürgen Rühle [Tue, 2 Jan 2007 19:26:23 +0000 (20:26 +0100)]
Support --amend on initial commit in status output
We check the existence of the parent commit to determine whether the status is
requested for an initial commit. Since the parent commit depends on the
presence of the --amend switch do initial commit detection after command line
arguments have been handled.
Signed-off-by: Jürgen Rühle <j-r@online.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jürgen Rühle [Tue, 2 Jan 2007 19:26:22 +0000 (20:26 +0100)]
Improve "nothing to commit" part of status output
Previously git-status in a clean working directory would advice the user to use
git add. This isn't very helpful when there is nothing to add in the working
directory, therefore note a clean working directory while displaying the other
sections and print the appropriate message for each case.
Signed-off-by: Jürgen Rühle <j-r@online.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jürgen Rühle [Tue, 2 Jan 2007 19:26:20 +0000 (20:26 +0100)]
Clarify syntax and role of git-add in status output
This uses the actual (simplified) synopsis line from the git-add man page and
advertises its incremental nature.
Signed-off-by: Jürgen Rühle <j-r@online.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Andy Whitcroft [Tue, 2 Jan 2007 14:12:09 +0000 (14:12 +0000)]
send pack check for failure to send revisions list
When passing the revisions list to pack-objects we do not check for
errors nor short writes. Introduce a new write_in_full which will
handle short writes and report errors to the caller. Use this to
short cut the send on failure, allowing us to wait for and report
the child in case the failure is its fault.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Tue, 2 Jan 2007 08:57:11 +0000 (00:57 -0800)]
instaweb: load Apache mime and dir modules if they are needed
I've noticed that Apache 2.2 on a Debian etch machine has
these compiled as modules.
Also set ServerName to avoid a warning at startup.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 2 Jan 2007 19:22:08 +0000 (11:22 -0800)]
fetch-pack: do not use lockfile structure on stack.
They are used in atexit() for clean-up, and you will be
accessing unallocated memory at that point.
See
31f584c2 for the fix for a similar problem.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 2 Jan 2007 07:42:53 +0000 (23:42 -0800)]
Remove unused variable (git-commit.sh)
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 1 Jan 2007 23:08:06 +0000 (15:08 -0800)]
Update clone/fetch documentation with --depth (shallow clone) option
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 1 Jan 2007 23:07:35 +0000 (15:07 -0800)]
Strongly discourage --update-head-ok in fetch-options documentation.
"Use it with care" is a wrong wording to say "this is purely internal
and you are supposed to know what you are doing if you use this".
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 1 Jan 2007 22:40:37 +0000 (14:40 -0800)]
Merge branch 'sp/merge' (early part)
* 'sp/merge' (early part):
Use merge-recursive in git-am -3.
Allow merging bare trees in merge-recursive.
Move better_branch_name above get_ref in merge-recursive.
J. Bruce Fields [Mon, 1 Jan 2007 21:40:23 +0000 (16:40 -0500)]
Documentation: remove master:origin example from pull-fetch-param.txt
This is no longer a useful example.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
J. Bruce Fields [Mon, 1 Jan 2007 21:39:06 +0000 (16:39 -0500)]
Documentation: update git-pull.txt for new clone behavior
Update examples, stop using branch named "origin" as an example.
Remove large example of use of remotes; that particular case is
nicely automated by default, so it's not so pressing to explain, and
we can refer to git-repo-config for the details.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 1 Jan 2007 20:24:15 +0000 (12:24 -0800)]
git-fetch: remove .keep file at the end.
Removal of them is needed regardless of errors. The original
code had the removal outside of the process which sets the flag
to tell the later step what to remove, but it runs as a
downstream of a pipeline and its effect was lost.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 1 Jan 2007 07:21:50 +0000 (23:21 -0800)]
fail pull/merge early in the middle of conflicted merge
After a pull that results in a conflicted merge, a new user
often tries another "git pull" in desperation. When the index
is unmerged, merge backends correctly bail out without touching
either index nor the working tree, so this does not make the
wound any worse.
The user will however see several lines of messsages during this
process, such as "filename: needs merge", "you need to resolve
your current index first", "Merging...", and "Entry ... would be
overwritten by merge. Cannot merge.". They are unnecessarily
alarming, and cause useful conflict messages from the first pull
scroll off the top of the terminal.
This changes pull and merge to run "git-ls-files -u" upfront and
stop them much earlier than we currently do. Old timers may
know better and would not to try pulling again before cleaning
things up; this change adds extra overhead that is unnecessary
for them. But this would be worth paying for to save new people
from needless confusion.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 1 Jan 2007 20:07:26 +0000 (12:07 -0800)]
Update send-pack pipeline documentation.
The pipeline was much more complex and needed documentation, but
now it is trivial and straightforward.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Mon, 1 Jan 2007 05:49:47 +0000 (21:49 -0800)]
git-svn: t/t91??-*: optimize the tests a bit
This removes some unnecessary 'svn up' calls throughout
t9103-git-svn-graft-branches.sh:
* removed an 'svn log' call that was leftover from debugging
* removed multiple git-svn calls with a multi-init / multi-fetch
combination (which weren't tested before, either)
* replaced `rev-list ... | head -n1` with `rev-parse ...`
(not sure what I was thinking when I wrote that)
All this saves about 9 seconds from a test run
(53s -> 44s for 'make t91*') on my 1.3GHz Athlon
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Mon, 1 Jan 2007 05:49:46 +0000 (21:49 -0800)]
git-svn: t/t9100-git-svn-basic: remove old check for NO_SYMLINK
We don't support the svn command-line client anymore; nor
do we support anything before SVN 1.1.0, so we can be certain
symlinks will be supported in the SVN repository.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Mon, 1 Jan 2007 05:49:45 +0000 (21:49 -0800)]
git-svn: remove svnadmin dependency from the tests
We require the libraries now, so we can create repositories
using them (and save some executable load time while we're at
it).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 1 Jan 2007 02:18:23 +0000 (18:18 -0800)]
i18n: do not leak 'encoding' header even when we cheat the conversion.
We special case the case where encoding recorded in the commit
and the output encoding are the same and do not call iconv().
But we should drop 'encoding' header for this case as well for
consistency.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 1 Jan 2007 01:44:37 +0000 (17:44 -0800)]
Do not merge random set of refs out of wildcarded refs
When your fetch configuration has only the wildcards, we would
pick the lexicographically first ref from the remote side for
merging, which was complete nonsense. Make sure nothing except
the one that is specified with branch.*.merge is merged in this
case.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Theodore Tso [Sun, 31 Dec 2006 04:11:52 +0000 (23:11 -0500)]
Fix formatting for urls section of fetch, pull, and push manpages
Updated to make the nroff'ed man pages look nicer.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
J. Bruce Fields [Sun, 31 Dec 2006 23:47:38 +0000 (18:47 -0500)]
Documentation: update tutorial's discussion of origin
Update tutorial's discussion of origin branch to reflect new defaults,
and include a brief mention of git-repo-config.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>