git.git
18 years agoRemove "tree->entries" tree-entry list from tree parser
Linus Torvalds [Sun, 28 May 2006 22:13:53 +0000 (15:13 -0700)]
Remove "tree->entries" tree-entry list from tree parser

This finally removes the tree-entry list from "struct tree", since most of
the users can just use the tree-walk infrastructure to walk the raw tree
buffers instead of the tree-entry list.

The tree-entry list is inefficient, and generates tons of small
allocations for no good reason. The tree-walk infrastructure is generally
no harder to use than following a linked list, and allows us to do most
tree parsing in-place.

Some programs still use the old tree-entry lists, and are a bit painful to
convert without major surgery. For them we have a helper function that
creates a temporary tree-entry list on demand. We can convert those too
eventually, but with this they no longer affect any users who don't need
the explicit lists.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoSwitch "read_tree_recursive()" over to tree-walk functionality
Linus Torvalds [Sun, 28 May 2006 22:11:28 +0000 (15:11 -0700)]
Switch "read_tree_recursive()" over to tree-walk functionality

Don't use the tree_entry list, it really had no major reason not to just
walk the raw tree instead.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMake "tree_entry" have a SHA1 instead of a union of object pointers
Linus Torvalds [Sun, 28 May 2006 22:10:04 +0000 (15:10 -0700)]
Make "tree_entry" have a SHA1 instead of a union of object pointers

This is preparatory work for further cleanups, where we try to make
tree_entry look more like the more efficient tree-walk descriptor.

Instead of having a union of pointers to blob/tree/objects, this just
makes "struct tree_entry" have the raw SHA1, and makes all the users use
that instead (often that implies adding a "lookup_tree(..)" on the sha1,
but sometimes the user just wanted the SHA1 in the first place, and it
just avoids an unnecessary indirection).

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoAdd raw tree buffer info to "struct tree"
Linus Torvalds [Sun, 28 May 2006 22:07:07 +0000 (15:07 -0700)]
Add raw tree buffer info to "struct tree"

This allows us to avoid allocating information for names etc, because
we can just use the information from the tree buffer directly.

We still keep the old "tree_entry_list" in struct tree as well, so old
users aren't affected, apart from the fact that the allocations are
different (if you free a tree entry, you should no longer free the name
allocation for it, since it's allocated as part of "tree->buffer")

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoDon't use "sscanf()" for tree mode scanning
Linus Torvalds [Sun, 28 May 2006 23:16:15 +0000 (16:16 -0700)]
Don't use "sscanf()" for tree mode scanning

Doing an oprofile run on the result of my git rev-list memory leak fixes
and tree parsing cleanups, I was surprised by the third-highest entry
being

samples  %        image name               app name                 symbol name
179751    2.7163  libc-2.4.so              libc-2.4.so              _IO_vfscanf@@GLIBC_2.4

where that 2.7% is actually more than 5% of one CPU, because this was run
on a dual CPU setup with the other CPU just being idle.

That seems to all be from the use of 'sscanf(tree, "%o", &mode)' for the
tree buffer parsing.

So do the trivial octal parsing by hand, which also gives us where the
first space in the string is (and thus where the pathname starts) so we
can get rid of the "strchr(tree, ' ')" call too.

This brings the "git rev-list --all --objects" time down from 63 seconds
to 55 seconds on the historical kernel archive for me, so it's quite
noticeable - tree parsing is a lot of what we end up doing when following
all the objects.

[ I also see a 5% speedup on a full "git fsck-objects" on the current
  kernel archive, so that sscanf() really does seem to have hurt our
  performance by a surprising amount ]

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogit-fetch: avoid using "case ... in (arm)"
Junio C Hamano [Mon, 29 May 2006 02:24:28 +0000 (19:24 -0700)]
git-fetch: avoid using "case ... in (arm)"

NetBSD ash chokes on the optional open parenthesis for case arms.  Inside
$(command substitution), however, bash barfs without.  So adjust things
accordingly.

Originally pointed out by Dennis Stosberg.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMerge branch 'jc/mailinfo'
Junio C Hamano [Sun, 28 May 2006 20:39:05 +0000 (13:39 -0700)]
Merge branch 'jc/mailinfo'

* jc/mailinfo:
  mailinfo: skip bogus UNIX From line inside body

18 years agoMerge branch 'eb/mailinfo'
Junio C Hamano [Sun, 28 May 2006 20:36:37 +0000 (13:36 -0700)]
Merge branch 'eb/mailinfo'

* eb/mailinfo:
  mailinfo: More carefully parse header lines in read_one_header_line()
  Allow in body headers beyond the in body header prefix.
  More accurately detect header lines in read_one_header_line
  In handle_body only read a line if we don't already have one.
  Refactor commit messge handling.
  Move B and Q decoding into check header.
  Make read_one_header_line return a flag not a length.

18 years agoFix memory leak in "git rev-list --objects"
Linus Torvalds [Sun, 28 May 2006 18:37:23 +0000 (11:37 -0700)]
Fix memory leak in "git rev-list --objects"

Martin Langhoff points out that "git repack -a" ends up using up a lot of
memory for big archives, and that git cvsimport probably should do only
incremental repacks in order to avoid having repacking flush all the
caches.

The big majority of the memory usage of repacking is from git rev-list
tracking all objects, and this patch should go a long way in avoiding the
excessive memory usage: the bulk of it was due to the object names being
leaked from the tree parser.

For the historic Linux kernel archive, this simple patch does:

Before:
/usr/bin/time git-rev-list --all --objects > /dev/null

72.45user 0.82system 1:13.55elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+125376minor)pagefaults 0swaps

After:
/usr/bin/time git-rev-list --all --objects > /dev/null

75.22user 0.48system 1:16.34elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+43921minor)pagefaults 0swaps

where we do end up wasting a bit of time on some extra strdup()s (which
could be avoided, but that would require tracking where the pathnames came
from), but we avoid a lot of memory usage.

Minor page faults track maximum RSS very closely (each page fault maps in
one page into memory), so the reduction from 125376 page faults to 43921
means a rough reduction of VM footprint from almost half a gigabyte to
about a third of that. Those numbers were also double-checked by looking
at "top" while the process was running.

(Side note: at least part of the remaining VM footprint is the mapping of
the 177MB pack-file, so the remaining memory use is at least partly "well
behaved" from a project caching perspective).

For the current git archive itself, the memory usage for a "--all
--objects" rev-list invocation dropped from 7128 pages to 2318 (27MB to
9MB), so the reduction seems to hold for much smaller projects too.

For regular "git-rev-list" usage (ie without the "--objects" flag) this
patch has no impact.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogitview: Move the console error messages to message dialog
Aneesh Kumar K.V [Sat, 27 May 2006 10:25:32 +0000 (15:55 +0530)]
gitview: Move the console error messages to message dialog

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogitview: Add key binding for F5.
Aneesh Kumar K.V [Sat, 27 May 2006 10:24:14 +0000 (15:54 +0530)]
gitview: Add key binding for F5.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoLet git-clone to pass --template=dir option to git-init-db.
Junio C Hamano [Sun, 28 May 2006 17:14:38 +0000 (10:14 -0700)]
Let git-clone to pass --template=dir option to git-init-db.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMake cvsexportcommit create parent directories as needed.
Yann Dirson [Sat, 27 May 2006 16:39:35 +0000 (18:39 +0200)]
Make cvsexportcommit create parent directories as needed.

This is a quick port of my initial patch for 1.0.7, that I had forgotten to
post.  Possibly needs some testing before applying to master.

Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoDocument current cvsexportcommit limitations.
Yann Dirson [Sat, 27 May 2006 16:39:33 +0000 (18:39 +0200)]
Document current cvsexportcommit limitations.

Since there is no bugtracker that I know of, let's just use the scripts
themselves to document their limitations.

Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoDo not call 'cmp' with non-existant -q flag.
Yann Dirson [Sat, 27 May 2006 16:39:31 +0000 (18:39 +0200)]
Do not call 'cmp' with non-existant -q flag.

I cannot find when that flag was removed if it ever existed, I can find
nothing about it in the ChangeLog and NEWS file of GNU diff.  The current
flag is -s aka --quiet aka --silent, so let's use -s, assuming it is a
portable flag.  Feel free to lart me with a POSIX bible if needed.

Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoFix "--abbrev=xyz" for revision listing
Linus Torvalds [Sat, 27 May 2006 19:24:30 +0000 (12:24 -0700)]
Fix "--abbrev=xyz" for revision listing

The revision argument parsing was happily parsing "--abbrev", but it
didn't parse "--abbrev=<n>".

Which was hidden by the fact that the diff options _would_ parse
--abbrev=<n>, so it would actually silently parse it, it just
wouldn't use it for the same things that a plain "--abbrev" was
used for.

Which seems a bit insane.

With this patch, if you do "git log --abbrev=10" it will abbreviate the
merge parent commit ID's to ten hex characters, which was probably what
you expected.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agot1002: use -U0 instead of --unified=0
Linus Torvalds [Fri, 26 May 2006 05:41:02 +0000 (22:41 -0700)]
t1002: use -U0 instead of --unified=0

Using "-U0" is definitely more portable than using "--unified=0",
so we should do that regardless.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoformat-patch: -n and -k are mutually exclusive.
Junio C Hamano [Sun, 28 May 2006 16:23:29 +0000 (09:23 -0700)]
format-patch: -n and -k are mutually exclusive.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoCall builtin ls-tree in git-cat-file -p
Petr Baudis [Fri, 26 May 2006 16:59:17 +0000 (18:59 +0200)]
Call builtin ls-tree in git-cat-file -p

Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agobuilt-in format-patch: various fixups.
Junio C Hamano [Fri, 26 May 2006 18:30:49 +0000 (11:30 -0700)]
built-in format-patch: various fixups.

 - The --start-number handling introduced breakage in the normal
   code path.  It started numbering at 0 when not --numbered,
   for example.

 - When generating one file per patch, we needlessly added an
   extra blank line in front for second and subsequent files.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoAdd instructions to commit template.
Martin Waitz [Thu, 25 May 2006 23:42:18 +0000 (01:42 +0200)]
Add instructions to commit template.

New users can be irritated by the git status text in their editor.
Let's give them a short help.

Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agomailinfo: More carefully parse header lines in read_one_header_line()
Junio C Hamano [Fri, 26 May 2006 07:46:58 +0000 (00:46 -0700)]
mailinfo: More carefully parse header lines in read_one_header_line()

We exited prematurely from header parsing loop when the header
field did not have a space after the colon but we insisted on
it, and we got the check wrong because we forgot that we strip
the trailing whitespace before we do the check.

The space after the colon is not even required by RFC2822, so
stop requiring it.  While we are at it, the header line is
specified to be more strict than "anything with a colon in it"
(there must be one or more characters before the colon, and they
must not be controls, SP or non US-ASCII), so implement that
check as well, lest we mistakenly think something like:

Bogus not a header line: this is not.

as a header line.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogit-format-patch --start-number <n>
Johannes Schindelin [Thu, 25 May 2006 21:55:11 +0000 (23:55 +0200)]
git-format-patch --start-number <n>

Since the "a..b c..d" syntax is interpreted as "b ^a d ^c" as other
range-ish commands, if you want to format a..b and then c..d and end
up with files consecutively numbered, the second run needs to be able
to tell the command what number to start from.

This does not imply --numbered (which gives [PATCH n/m] to the subject).

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoDon't write directly to a make target ($@).
Jim Meyering [Thu, 25 May 2006 16:52:01 +0000 (18:52 +0200)]
Don't write directly to a make target ($@).

Otherwise, if make is suspended, or killed with prejudice, or if the
system crashes, you could be left with an up-to-date, yet corrupt,
generated file.

I left off the `clean' addition, because I believe "make clean" should
not remove wildcard patterns like "*+", on the off-chance that someone
uses names like that for files they care about.  Besides, in practice,
those temporary files are left behind so rarely that they're not a bother,
and they're removed again as part of the next build.

[jc: sign-off?]

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agobogus "fatal: Not a git repository"
Linus Torvalds [Thu, 25 May 2006 15:22:42 +0000 (08:22 -0700)]
bogus "fatal: Not a git repository"

I was just testing that "git ls-remote" change by Junio, and when you're
not in a git repository, it gives this totally bogus warning. The _target_
obviously has to be a git repository, but there's no reason why you'd have
to be in a local git repo when doing an ls-remote.

The reason is commit 73136b2e8a8ee024320c5ac6a0f14f912432bf03 by Dscho: it
adds calls to git-repo-config in git-parse-remote.sh to get the remote
shorthands etc.

Now, either we should just hide and ignore the error from git-repo-config
(probably bad, because some errors _are_ valid - like git-repo-config
failing due to bad syntax in the config file), or we should just make
git-repo-config quietly handle the case of not being in a git repository.

This does the latter: just quietly accepting (and doing nothing - trying
to set a value will result in the lock-file failing) our lot in life
sounds better than dying with a bogus error message.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Acked-By: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoDocumentation/Makefile: remove extra /
Martin Waitz [Thu, 25 May 2006 12:37:46 +0000 (14:37 +0200)]
Documentation/Makefile: remove extra /

As both DESTDIR and the prefix are supposed to be absolute pathnames
they can simply be concatenated without an extra / (like in the main Makefile).
The extra slash may even break installation on Windows.

[jc: adjusted an earlier workaround for this problem in the dist-doc
 target in the main Makefile as well. ]

Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocvsimport: avoid "use" with :tag
Jeff King [Wed, 24 May 2006 13:58:28 +0000 (09:58 -0400)]
cvsimport: avoid "use" with :tag

Avoid "use POSIX qw(strftime dup2 :errno_h)"; it was reported
that a Perl installations on Mandrake 9.1 did not like it, even
though it understood "use POSIX qw(:errno_h)".  Funny.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocat-file: document -p option
Jeff King [Thu, 25 May 2006 01:22:32 +0000 (21:22 -0400)]
cat-file: document -p option

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoBuilt git-upload-tar should be ignored.
Shawn Pearce [Thu, 25 May 2006 02:48:39 +0000 (22:48 -0400)]
Built git-upload-tar should be ignored.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agols-remote: fix rsync:// to report HEAD
Junio C Hamano [Thu, 25 May 2006 04:36:14 +0000 (21:36 -0700)]
ls-remote: fix rsync:// to report HEAD

This prevented recent git-clone from checking out the working
tree files in the cloned repository.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agofetch.c: remove an unused variable and dead code.
Junio C Hamano [Wed, 24 May 2006 23:42:38 +0000 (16:42 -0700)]
fetch.c: remove an unused variable and dead code.

Funnily enough, this variable was never assigned ever since it
was introduced, and has been protecting some code that has never
been executed.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoClean up sha1 file writing
Linus Torvalds [Wed, 24 May 2006 15:30:54 +0000 (08:30 -0700)]
Clean up sha1 file writing

This cleans up and future-proofs the sha1 file writing in sha1_file.c.

In particular, instead of doing a simple "write()" call and just verifying
that it succeeds (or - as in one place - just assuming it does), it uses
"write_buffer()" to write data to the file descriptor while correctly
checking for partial writes, EINTR etc.

It also splits up write_sha1_to_fd() to be a lot more readable: if we need
to re-create the compressed object, we do so in a separate helper
function, making the logic a whole lot more modular and obvious.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoBuiltin git-cat-file
Timo Hirvonen [Wed, 24 May 2006 11:08:46 +0000 (14:08 +0300)]
Builtin git-cat-file

Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMerge branch 'jc/fmt-patch'
Junio C Hamano [Wed, 24 May 2006 19:21:17 +0000 (12:21 -0700)]
Merge branch 'jc/fmt-patch'

* jc/fmt-patch:
  builtin format-patch: squelch content-type for 7-bit ASCII
  CMIT_FMT_EMAIL: Q-encode Subject: and display-name part of From: fields.

18 years agoMerge branch 'be/tag'
Junio C Hamano [Wed, 24 May 2006 19:20:48 +0000 (12:20 -0700)]
Merge branch 'be/tag'

* be/tag:
  add more informative error messages to git-mktag
  remove the artificial restriction tagsize < 8kb

18 years agoMerge branch 'js/fmt-patch'
Junio C Hamano [Wed, 24 May 2006 19:19:47 +0000 (12:19 -0700)]
Merge branch 'js/fmt-patch'

This makes "git format-patch" a built-in.

* js/fmt-patch:
  git-rebase: use canonical A..B syntax to format-patch
  git-format-patch: now built-in.
  fmt-patch: Support --attach
  fmt-patch: understand old <his> notation
  Teach fmt-patch about --keep-subject
  Teach fmt-patch about --numbered
  fmt-patch: implement -o <dir>
  fmt-patch: output file names to stdout
  Teach fmt-patch to write individual files.
  Use RFC2822 dates from "git fmt-patch".
  git-fmt-patch: thinkofix to show [PATCH] properly.
  rename internal format-patch wip
  Minor tweak on subject line in --pretty=email
  Tentative built-in format-patch.

18 years agoMerge branch 'jc/builtin-n-tar-tree'
Junio C Hamano [Wed, 24 May 2006 18:24:50 +0000 (11:24 -0700)]
Merge branch 'jc/builtin-n-tar-tree'

This pulls in "make many commands built-in" branches.

* jc/builtin-n-tar-tree:
  built-in tar-tree and remote tar-tree
  Builtin git-diff-files, git-diff-index, git-diff-stages, and git-diff-tree.
  Builtin git-show-branch.
  Builtin git-apply.
  Builtin git-commit-tree.
  Builtin git-read-tree.
  Builtin git-tar-tree.
  Builtin git-ls-tree.
  Builtin git-ls-files.

18 years agoMerge branch 'jc/fetch-sorted'
Junio C Hamano [Wed, 24 May 2006 18:04:55 +0000 (11:04 -0700)]
Merge branch 'jc/fetch-sorted'

* jc/fetch-sorted:
  fetch-pack: output refs in the order they were given on the command line.

18 years agoMerge branch 'lt/dirwalk'
Junio C Hamano [Wed, 24 May 2006 18:04:16 +0000 (11:04 -0700)]
Merge branch 'lt/dirwalk'

This makes 'git add' and 'git rm' built-ins.

* lt/dirwalk:
  Add builtin "git rm" command
  Move pathspec matching from builtin-add.c into dir.c
  Prevent bogus paths from being added to the index.
  builtin-add: fix unmatched pathspec warnings.
  Remove old "git-add.sh" remnants
  builtin-add: warn on unmatched pathspecs
  Do "git add" as a builtin
  Clean up git-ls-file directory walking library interface
  libify git-ls-files directory traversal

18 years ago--summary output should print immediately after stats.
Sean [Tue, 23 May 2006 09:34:23 +0000 (05:34 -0400)]
--summary output should print immediately after stats.

Currently the summary is displayed after the patch.  Fix this so
that the output order is stat-summary-patch.  As a consequence of
the way this is coded, the --summary option will only actually
display summary data if combined with either the --stat or
--patch-with-stat option.

Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogit-svn: ignore expansion of svn:keywords
Eric Wong [Wed, 24 May 2006 02:23:41 +0000 (19:23 -0700)]
git-svn: ignore expansion of svn:keywords

Unlike my earlier test patch, this also checks svn:eol-style and
makes sure it's applied to working copy updates.  This is
definitely more correct than my original attempt at killing
keyword expansions, but I still haven't tested it enough to
know.  Feedback would be much appreciated.

Also changed assert_svn_wc_clean() to only work on the svn
working copy.  This requires a separate call to assert_tree() to
check wc integrity against git in preparation for another change
I'm planning.

Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogit-svn: starting a 1.1.0-pre development version
Eric Wong [Wed, 24 May 2006 02:23:40 +0000 (19:23 -0700)]
git-svn: starting a 1.1.0-pre development version

Some not-very-well-tested changes coming...

Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocvsimport: set up commit environment in perl instead of using env
Jeff King [Tue, 23 May 2006 20:59:44 +0000 (16:59 -0400)]
cvsimport: set up commit environment in perl instead of using env

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocvsimport: do not barf on creation of an empty file.
Junio C Hamano [Tue, 23 May 2006 23:30:39 +0000 (16:30 -0700)]
cvsimport: do not barf on creation of an empty file.

When the server says "created this file whose length is empty",
we mistakenly said "oops, the server did not say a sensible
thing".  Fix it.

Spotted and fixed by Linus, acked by Martin.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMerge branch 'jc/tartree' into jc/builtin-n-tar-tree
Junio C Hamano [Tue, 23 May 2006 21:44:31 +0000 (14:44 -0700)]
Merge branch 'jc/tartree' into jc/builtin-n-tar-tree

* jc/tartree:
  built-in tar-tree and remote tar-tree

18 years agoAllow in body headers beyond the in body header prefix.
Eric W. Biederman [Tue, 23 May 2006 19:58:36 +0000 (13:58 -0600)]
Allow in body headers beyond the in body header prefix.

- handle_from is fixed to not mangle it's input line.

- Then handle_inbody_header is allowed to look in
  the body of a commit message for additional headers
  that we haven't already seen.

This allows patches with all of the right information in
unfortunate places to be imported.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMore accurately detect header lines in read_one_header_line
Eric W. Biederman [Tue, 23 May 2006 19:53:20 +0000 (13:53 -0600)]
More accurately detect header lines in read_one_header_line

Only count lines of the form '^.*: ' and '^From ' as email
header lines.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoIn handle_body only read a line if we don't already have one.
Eric W. Biederman [Tue, 23 May 2006 19:49:00 +0000 (13:49 -0600)]
In handle_body only read a line if we don't already have one.

This prepares for detecting non-email patches that don't have
mail headers.  In which case we have already read the first
line so handle_body should not ignore it.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoRefactor commit messge handling.
Eric W. Biederman [Tue, 23 May 2006 19:47:28 +0000 (13:47 -0600)]
Refactor commit messge handling.

- Move handle_info into main so it is called once
  after everything has been parsed.  This allows the removal
  of a static variable and removes two duplicate calls.

- Move parsing of inbody headers into handle_commit.
  This means we parse the in-body headers after we have decoded
  the character set, and it removes code duplication between
  handle_multipart_one_part and handle_body.

- Change the flag indicating that we have seen an in body
  prefix header into another bit in seen.
  This is a little more general and allows the possibility of parsing
  in body headers after the body message has begun.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMove B and Q decoding into check header.
Eric W. Biederman [Tue, 23 May 2006 19:45:37 +0000 (13:45 -0600)]
Move B and Q decoding into check header.

B and Q decoding is not appropriate for in body headers, so move
it up to where we explicitly know we have a real email header.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMake read_one_header_line return a flag not a length.
Eric W. Biederman [Tue, 23 May 2006 19:44:11 +0000 (13:44 -0600)]
Make read_one_header_line return a flag not a length.

Currently we only use the return value from read_one_header line
to tell if the line we have read is a header or not.  So make
it a flag.  This paves the way for better email detection.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoadd more informative error messages to git-mktag
Björn Engelmann [Tue, 23 May 2006 18:20:09 +0000 (20:20 +0200)]
add more informative error messages to git-mktag

Signed-off-by: Björn Engelmann <BjEngelmann@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoremove the artificial restriction tagsize < 8kb
Björn Engelmann [Tue, 23 May 2006 18:19:04 +0000 (20:19 +0200)]
remove the artificial restriction tagsize < 8kb

Signed-off-by: Björn Engelmann <BjEngelmann@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoBuiltin git-diff-files, git-diff-index, git-diff-stages, and git-diff-tree.
Peter Eriksen [Tue, 23 May 2006 12:15:36 +0000 (14:15 +0200)]
Builtin git-diff-files, git-diff-index, git-diff-stages, and git-diff-tree.

Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoBuiltin git-show-branch.
Peter Eriksen [Tue, 23 May 2006 12:15:35 +0000 (14:15 +0200)]
Builtin git-show-branch.

Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoBuiltin git-apply.
Peter Eriksen [Tue, 23 May 2006 12:15:34 +0000 (14:15 +0200)]
Builtin git-apply.

Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoBuiltin git-commit-tree.
Peter Eriksen [Tue, 23 May 2006 12:15:33 +0000 (14:15 +0200)]
Builtin git-commit-tree.

Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoBuiltin git-read-tree.
Peter Eriksen [Tue, 23 May 2006 12:15:32 +0000 (14:15 +0200)]
Builtin git-read-tree.

Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoBuiltin git-tar-tree.
Peter Eriksen [Tue, 23 May 2006 12:15:31 +0000 (14:15 +0200)]
Builtin git-tar-tree.

Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoBuiltin git-ls-tree.
Peter Eriksen [Tue, 23 May 2006 12:15:30 +0000 (14:15 +0200)]
Builtin git-ls-tree.

Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoBuiltin git-ls-files.
Peter Eriksen [Tue, 23 May 2006 12:15:29 +0000 (14:15 +0200)]
Builtin git-ls-files.

Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoAdd git-quiltimport to .gitignore.
Peter Eriksen [Mon, 22 May 2006 13:46:25 +0000 (15:46 +0200)]
Add git-quiltimport to .gitignore.

Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocvsimport: introduce _fetchfile() method and used a 1M buffer to read()
Martin Langhoff [Tue, 23 May 2006 08:08:58 +0000 (20:08 +1200)]
cvsimport: introduce _fetchfile() method and used a 1M buffer to read()

File retrieval from the socket is now moved to _fetchfile() and we now
cap reads at 1MB. This should limit the memory growth of the cvsimport
process.

Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocvsimport: cleanup commit function
Jeff King [Tue, 23 May 2006 07:27:46 +0000 (03:27 -0400)]
cvsimport: cleanup commit function

This change attempts to clean up the commit function to make it a bit
easier to read (or at least the first half of it). It also improves
robustness and performance. Specifically:
  - report get_headref errors on opening ref unless the error is ENOENT
  - use regex to check for sha1 instead of length
  - use lexically scoped filehandles which get cleaned up automagically
  - check for error on both 'print' and 'close' (since output is buffered)
  - avoid "fork, do some perl, then exec" in commit(). It's not necessary,
    and we probably end up COW'ing parts of the perl process. Plus the code
    is much smaller because we can use open2()
  - avoid calling strftime over and over (mainly a readability cleanup)

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocvsimport: use git-update-index --index-info
Jeff King [Tue, 23 May 2006 07:27:45 +0000 (03:27 -0400)]
cvsimport: use git-update-index --index-info

This should reduce the number of git-update-index forks required per
commit. We now do adds/removes in one call, and we are no longer forced to
deal with argv limitations.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogit status: skip empty directories, and add -u to show all untracked files
Matthias Lederhofer [Mon, 22 May 2006 21:02:06 +0000 (23:02 +0200)]
git status: skip empty directories, and add -u to show all untracked files

By default, we use --others --directory to show uninteresting
directories (to get user's attention) without their contents (to
unclutter output).  Showing empty directories do not make sense,
so pass --no-empty-directory when we do so.

Giving -u (or --untracked) disables this uncluttering to let the
user get all untracked files.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocvsimport: repack every kilo-commits.
Linus Torvalds [Tue, 23 May 2006 02:28:37 +0000 (19:28 -0700)]
cvsimport: repack every kilo-commits.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Acked-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocvsimport: introduce -L<imit> option to workaround memory leaks
Martin Langhoff [Mon, 22 May 2006 11:38:08 +0000 (23:38 +1200)]
cvsimport: introduce -L<imit> option to workaround memory leaks

Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoInstall git builtins into gitexecdir rather than bindir.
Sean [Mon, 22 May 2006 04:42:59 +0000 (00:42 -0400)]
Install git builtins into gitexecdir rather than bindir.

Moving "git-cmd" commands out of the path and into a special
git exec path, should include the builtins.

[jc: fixed the case where bindir == gitexecdir - ln -f fails
 with a complaint that src and dst are the same, likewise for
 the fallback cp.]

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoChange GIT-VERSION-GEN to call git commands with "git" not "git-".
Sean [Mon, 22 May 2006 04:39:52 +0000 (00:39 -0400)]
Change GIT-VERSION-GEN to call git commands with "git" not "git-".

GIT-VERSION-GEN can incorrectly return a default version of
"v1.3.GIT" because it tries to execute git commands using the
"git-cmd" format that expects all git commands to be in the $PATH.
Convert these to  "git cmd" format so that a proper answer is
returned even when the git commands have been moved out of the
$PATH and into a $gitexecdir.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocvsimport: replace anonymous sub ref with a normal sub
Martin Langhoff [Mon, 22 May 2006 12:45:39 +0000 (00:45 +1200)]
cvsimport: replace anonymous sub ref with a normal sub

commit() does not need to be an anonymous subreference. Keep it simple.

Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocvsimport: minor fixups
Martin Langhoff [Mon, 22 May 2006 12:45:47 +0000 (00:45 +1200)]
cvsimport: minor fixups

Cleanup @skipped after it's used. Close a fhandle.
Removing suspects one at a time.

Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoProblem: 'trap...exit' causes error message when /bin/sh is ash.
Yakov Lerner [Mon, 22 May 2006 19:34:00 +0000 (22:34 +0300)]
Problem: 'trap...exit' causes error message when /bin/sh is ash.

Problem: 'trap...exit' causes error message when /bin/sh is ash.
Fix: Change 'trap...exit' to 'trap...0' like in other scripts.

Signed-off-by: Yakov Lerner <iler.ml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoAvoid segfault in diff --stat rename output.
Sean [Tue, 23 May 2006 00:36:34 +0000 (20:36 -0400)]
Avoid segfault in diff --stat rename output.

Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoTutorial #2: broken link fix.
Junio C Hamano [Mon, 22 May 2006 22:34:40 +0000 (15:34 -0700)]
Tutorial #2: broken link fix.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogit help: remove whatchanged from list of common commands
Martin Waitz [Mon, 22 May 2006 10:09:14 +0000 (12:09 +0200)]
git help: remove whatchanged from list of common commands

whatchanged is replaced by git log now.

Signed-off-by: Martin Waitz
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agofetch-pack: output refs in the order they were given on the command line.
Junio C Hamano [Thu, 11 May 2006 22:28:44 +0000 (15:28 -0700)]
fetch-pack: output refs in the order they were given on the command line.

Currently, fetched refs are output in the order the remote side
happened to send them.  This changes the order to match the
order of refs that were given on the command line.  To the
existing core callers (git-fetch and git-clone) this does not
make any difference, but for other Porcelain use, it would be
more intuitive.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agodiff: minor option combination fix.
Junio C Hamano [Mon, 22 May 2006 07:31:02 +0000 (00:31 -0700)]
diff: minor option combination fix.

output_format == DIFFSTAT and with_stat == true does not make sense, and
the way the code is structured it causes trouble.  Avoid it.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agobuiltin format-patch: squelch content-type for 7-bit ASCII
Junio C Hamano [Mon, 22 May 2006 06:55:00 +0000 (23:55 -0700)]
builtin format-patch: squelch content-type for 7-bit ASCII

When --attach is not used, usually we do not say Content-Type:
and fluff, but if the commit message is not 7-bit ASCII, mark
it as "text/plain; charset=UTF-8".  This unclutters output
somewhat.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoCMIT_FMT_EMAIL: Q-encode Subject: and display-name part of From: fields.
Junio C Hamano [Tue, 16 May 2006 09:29:42 +0000 (02:29 -0700)]
CMIT_FMT_EMAIL: Q-encode Subject: and display-name part of From: fields.

By convention, the commit message and the author/committer names
in the commit objects are UTF-8 encoded.  When formatting for
e-mails, Q-encode them according to RFC 2047.

While we are at it, generate the content-type and
content-transfer-encoding headers as well.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agomailinfo: skip bogus UNIX From line inside body
Junio C Hamano [Mon, 22 May 2006 00:15:06 +0000 (17:15 -0700)]
mailinfo: skip bogus UNIX From line inside body

Sometimes people just include the whole format-patch output in
the commit e-mail.  Detect it and skip the bogus ">From " line.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agotutorial-2: typofix in examples.
Junio C Hamano [Mon, 22 May 2006 00:37:25 +0000 (17:37 -0700)]
tutorial-2: typofix in examples.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agotutorial: add discussion of index file, object database
J. Bruce Fields [Sun, 21 May 2006 23:49:34 +0000 (19:49 -0400)]
tutorial: add discussion of index file, object database

Add a sequel to tutorial.txt which discusses the index file and
the object database.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agotutorial: expanded discussion of commit history
J. Bruce Fields [Sun, 21 May 2006 20:54:05 +0000 (16:54 -0400)]
tutorial: expanded discussion of commit history

Expand the history-browsing section of the tutorial a bit, in part to
address Junio's suggestion that we mention "git grep" and Linus's
complaint that people are missing the flexibility of the commandline
interfaces for selecting commits.

This reads a little more like a collection of examples than a
"tutorial", but maybe that's what people need at this point.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agotutorial: replace "whatchanged" by "log"
J. Bruce Fields [Sun, 21 May 2006 20:52:34 +0000 (16:52 -0400)]
tutorial: replace "whatchanged" by "log"

Junio suggested changing references to git-whatchanged to git-log.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoNO_INET_NTOP and compat/inet_ntop.c for some systems (e.g. old Cygwin).
Yakov Lerner [Sun, 21 May 2006 21:37:00 +0000 (00:37 +0300)]
NO_INET_NTOP and compat/inet_ntop.c for some systems (e.g. old Cygwin).

For systems which lack inet_ntop(), this adds compat/inet_ntop.c,
and related build constant, NO_INET_NTOP. Older Cygwin(s) lack
inet_ntop().

Signed-off-by: Yakov Lerner <iler.ml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoremove superflous "const"
Alex Riesen [Sun, 21 May 2006 20:45:46 +0000 (22:45 +0200)]
remove superflous "const"

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogit-rebase: use canonical A..B syntax to format-patch
Junio C Hamano [Sun, 21 May 2006 10:16:38 +0000 (03:16 -0700)]
git-rebase: use canonical A..B syntax to format-patch

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocheckdiff_consume: strtol parameter fix.
Junio C Hamano [Sun, 21 May 2006 10:01:59 +0000 (03:01 -0700)]
checkdiff_consume: strtol parameter fix.

The second parameter is not the end of string input; it is
the optional return value to retrieve where the parser stopped.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogit-format-patch: now built-in.
Junio C Hamano [Sun, 21 May 2006 09:48:21 +0000 (02:48 -0700)]
git-format-patch: now built-in.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoElaborate on why ':' is a bad idea in a ref name.
Shawn Pearce [Sun, 21 May 2006 02:03:14 +0000 (22:03 -0400)]
Elaborate on why ':' is a bad idea in a ref name.

With the new cat-file syntax of 'v1.3.3:refs.c' we should mention
it as part of the reason why ':' is not permitted in a ref name.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoReference git-check-ref-format in git-branch.
Shawn Pearce [Sun, 21 May 2006 01:54:46 +0000 (21:54 -0400)]
Reference git-check-ref-format in git-branch.

Its nice to have git-check-ref-format actually get mentioned in
git-branch's documentation as the syntax of a ref name must conform
to what is described in git-check-ref-format.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agofmt-patch: Support --attach
Johannes Schindelin [Sat, 20 May 2006 13:40:29 +0000 (15:40 +0200)]
fmt-patch: Support --attach

This patch touches a couple of files, because it adds options to print a
custom text just after the subject of a commit, and just after the
diffstat.

[jc: made "many dashes" used as the boundary leader into a single
 variable, to reduce the possibility of later tweaks to miscount the
 number of dashes to break it.]

Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMerge branch 'master' into js/fmt-patch
Junio C Hamano [Sun, 21 May 2006 08:34:54 +0000 (01:34 -0700)]
Merge branch 'master' into js/fmt-patch

* master: (119 commits)
  diff family: add --check option
  Document that "git add" only adds non-ignored files.
  Add a conversion tool to migrate remote information into the config
  fetch, pull: ask config for remote information
  Fix build procedure for builtin-init-db
  read-tree -m -u: do not overwrite or remove untracked working tree files.
  apply --cached: do not check newly added file in the working tree
  Implement a --dry-run option to git-quiltimport
  Implement git-quiltimport
  Revert "builtin-grep: workaround for non GNU grep."
  builtin-grep: workaround for non GNU grep.
  builtin-grep: workaround for non GNU grep.
  git-am: use apply --cached
  apply --cached: apply a patch without using working tree.
  apply --numstat: show new name, not old name.
  Documentation/Makefile: create tarballs for the man pages and html files
  Allow pickaxe and diff-filter options to be used by git log.
  Libify the index refresh logic
  Builtin git-init-db
  Remove unnecessary local in get_ref_sha1.
  ...

18 years agodiff family: add --check option
Johannes Schindelin [Sat, 20 May 2006 21:43:13 +0000 (23:43 +0200)]
diff family: add --check option

Actually, it is a diff option now, so you can say

git diff --check

to ask if what you are about to commit is a good patch.

[jc: this also would work for fmt-patch, but the point is that
 the check is done before making a commit.  format-patch is run
 from an already created commit, and that is too late to catch
 whitespace damaged change.]

Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoDocument that "git add" only adds non-ignored files.
Santi [Fri, 19 May 2006 21:02:34 +0000 (23:02 +0200)]
Document that "git add" only adds non-ignored files.

Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agobuilt-in tar-tree and remote tar-tree
Junio C Hamano [Fri, 19 May 2006 01:46:44 +0000 (18:46 -0700)]
built-in tar-tree and remote tar-tree

This makes tar-tree a built-in.  As an added bonus, you can now
say:

git tar-tree --remote=remote-repository <ent> [<base>]

This does not work with git-daemon yet, but should work with
localhost and git over ssh transports.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMerge branch 'js/fetchconfig'
Junio C Hamano [Sat, 20 May 2006 00:44:07 +0000 (17:44 -0700)]
Merge branch 'js/fetchconfig'

* js/fetchconfig:
  Add a conversion tool to migrate remote information into the config
  fetch, pull: ask config for remote information

18 years agoAdd builtin "git rm" command
Linus Torvalds [Fri, 19 May 2006 23:19:34 +0000 (16:19 -0700)]
Add builtin "git rm" command

This changes semantics very subtly, because it adds a new atomicity
guarantee.

In particular, if you "git rm" several files, it will now do all or
nothing. The old shell-script really looped over the removed files one by
one, and would basically randomly fail in the middle if "-f" was used and
one of the files didn't exist in the working directory.

This C builtin one will not re-write the index after each remove, but
instead remove all files at once. However, that means that if "-f" is used
(to also force removal of the file from the working directory), and some
files have already been removed from the workspace, it won't stop in the
middle in some half-way state like the old one did.

So what happens is that if the _first_ file fails to be removed with "-f",
we abort the whole "git rm". But once we've started removing, we don't
leave anything half done. If some of the other files don't exist, we'll
just ignore errors of removal from the working tree.

This is only an issue with "-f", of course.

I think the new behaviour is strictly an improvement, but perhaps more
importantly, it is _different_. As a special case, the semantics are
identical for the single-file case (which is the only one our test-suite
seems to test).

The other question is what to do with leading directories. The old "git
rm" script didn't do anything, which is somewhat inconsistent. This one
will actually clean up directories that have become empty as a result of
removing the last file, but maybe we want to have a flag to decide the
behaviour?

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoFix build procedure for builtin-init-db
Junio C Hamano [Sat, 20 May 2006 00:23:07 +0000 (17:23 -0700)]
Fix build procedure for builtin-init-db

c3c8835fbb182d971d71939b9a3ec7c8b86d6caf broke the default template
location which is in builtin-init-db.o, by not supplying the
compilation-time constant to the right build commands.

Signed-off-by: Junio C Hamano <junkio@cox.net>