From: Frank Mori Hess Date: Tue, 28 Aug 2001 00:02:54 +0000 (+0000) Subject: updated cb_pcidas, cb_pcidas64, das16 entries X-Git-Tag: r0_7_61~134 X-Git-Url: http://git.tremily.us/?a=commitdiff_plain;h=fb6542efaf3ef615c346d19effa5bbd34a36867e;p=comedi.git updated cb_pcidas, cb_pcidas64, das16 entries --- diff --git a/Documentation/comedi/drivers.txt b/Documentation/comedi/drivers.txt index a393794b..690e668f 100644 --- a/Documentation/comedi/drivers.txt +++ b/Documentation/comedi/drivers.txt @@ -87,15 +87,13 @@ Description: Driver for the ComputerBoards/MeasurementComputing cards Author: Ivan Martinez , Frank Mori Hess Status: - - PCI-DAS1602/16, 16jr: Manual of these cards hasn't been read. - Driver will work as far as they are compatible with the other - supported cards. Please report usage. - - PCI-DAS1602/12: Same as before. - - PCI-DAS1200, 1200jr: Simple analog input reading has been tested - enough. Commands testing is in progress, and may be finished when - you read this (check mailing list archive for latest news). - - PCI-DAS1000, 1001, 1002: Manual of these cards has been read, - but they haven't been tested at all. Please report usage. + - PCI-DAS1602/16, 16jr: Driver should work, but untested. Please + report usage. + - PCI-DAS1602/12: Same as above. + - PCI-DAS1200, 1200jr: Tested, works. + - PCI-DAS1000, 1001, 1002: Should work, but untested. Please report + usage. +Updated: 2001-8-27 This driver originally intended to support the whole PCI-DAS series, but cards based on the PLX PCI controller are excluded for being @@ -107,8 +105,26 @@ Configuration options: If bus/slot is not specified, the first available PCI device will be used. -For commands, the scaned channels must be consecutive -(i.e. 4-5-6-7, 2-3-4,...). +For commands, the scanned channels must be consecutive +(i.e. 4-5-6-7, 2-3-4,...), and must all have the same +range and aref. + + + +Driver: cb_pcidas64.o +Description: Driver for the ComputerBoards/MeasurementComputing + PCI-DAS64xxx series with the PLX 9080 PCI controller. +Author: Frank Mori Hess +Status: Experimental +Updated: 2001-8-27 + +Configuration options: + [0] - PCI bus of device (optional) + [1] - PCI slot of device (optional) + +Basic insn support should work, but untested as far as I know. + Feel free to send and success/failure reports to author. No + command support yet. @@ -257,14 +273,23 @@ Device Names: das-16, das-16g, das-16f, cio-das16/jr, pc104-das16jr, das-1602, cio-das1401/12, cio-das1402/12, cio-das1402/16, cio-das1601/12, cio-das1602/12, cio-das1602/16, cio-das16/330 Status: works in das16 mode, das-1600 enhanced mode features untested. +Updated: 2001-8-27 A rewrite of the das16 and das1600 drivers. Options: [0] - base io address [1] - irq (optional) [2] - dma (optional) - [3] - master clock speed in MHz (1 or 10, ignored if board can + [3] - master clock speed in MHz (optional, 1 or 10, ignored if board can probe clock, defaults to 1) + [4] - analog input range lowest voltage (optional, only useful if your + board does not have software programmable gain) + [5] - analog input range highest voltage (optional, only useful if your + board does not have software programmable gain) + [6] - analog output range lowest voltage (optional) + [7] - analog output range highest voltage (optional) + +Passing a zero for an option is the same as leaving it unspecified. Both an irq line and dma channel are required for timed or externally triggered conversions.