From: Frank Mori Hess Date: Wed, 18 Oct 2006 14:32:32 +0000 (+0000) Subject: Replaced a bunch of printk with RT-safe rt_printk X-Git-Tag: r0_7_74~190 X-Git-Url: http://git.tremily.us/?a=commitdiff_plain;h=d059c074f9ae8ed142dfda580d82ad8ecfe81aee;p=comedi.git Replaced a bunch of printk with RT-safe rt_printk --- diff --git a/comedi/drivers/ni_mio_common.c b/comedi/drivers/ni_mio_common.c index 6f454440..73db889e 100644 --- a/comedi/drivers/ni_mio_common.c +++ b/comedi/drivers/ni_mio_common.c @@ -52,7 +52,6 @@ ISSUES: - the interrupt routine needs to be cleaned up - - many printk's need to be changed to rt_printk() 2006-02-07: S-Series PCI-6143: Support has been added but is not fully tested as yet. Terry Barnaby, BEAM Ltd. @@ -412,8 +411,8 @@ static inline void ni_set_bits(comedi_device *dev, int reg, int bits, int value) devpriv->stc_writew(dev, devpriv->io_bidirection_pin_reg,IO_Bidirection_Pin_Register); break; default: - printk("Warning ni_set_bits() called with invalid arguments\n"); - printk("reg is %d\n",reg); + rt_printk("Warning ni_set_bits() called with invalid arguments\n"); + rt_printk("reg is %d\n",reg); comedi_spin_unlock_irqrestore( &devpriv->window_lock, flags ); break; } @@ -469,7 +468,7 @@ static void ni_sync_ai_dma(struct mite_struct *mite, comedi_device *dev) nbytes = mite_bytes_written_to_memory_lb(mite, AI_DMA_CHAN); rmb(); if( (int)(mite_bytes_written_to_memory_ub(mite, AI_DMA_CHAN) - old_alloc_count) > 0 ){ - printk("ni_mio_common: DMA overwrite of free area\n"); + rt_printk("ni_mio_common: DMA overwrite of free area\n"); ni_ai_reset(dev,s); async->events |= COMEDI_CB_OVERFLOW; return; @@ -631,7 +630,7 @@ static void handle_a_interrupt(comedi_device *dev,unsigned short status, } if(m_status & ~(CHSR_INT | CHSR_LINKC | CHSR_DONE | CHSR_MRDY | CHSR_DRDY | CHSR_DRQ1 | CHSR_DRQ0 | CHSR_ERROR | CHSR_SABORT | CHSR_XFERR | CHSR_LxERR_mask)){ - printk("unknown mite interrupt, ack! (m_status=%08x)\n", m_status); + rt_printk("unknown mite interrupt, ack! (m_status=%08x)\n", m_status); //mite_print_chsr(m_status); mite_dma_disarm(devpriv->mite, AI_DMA_CHAN ); writel(CHOR_DMARESET, devpriv->mite->mite_io_addr + MITE_CHOR(AI_DMA_CHAN)); @@ -716,7 +715,7 @@ static void handle_a_interrupt(comedi_device *dev,unsigned short status, #ifdef DEBUG_INTERRUPT status=devpriv->stc_readw(dev, AI_Status_1_Register); if(status&Interrupt_A_St){ - printk("handle_a_interrupt: didn't clear interrupt? status=0x%x\n", status); + rt_printk("handle_a_interrupt: didn't clear interrupt? status=0x%x\n", status); } #endif } @@ -743,7 +742,7 @@ static void handle_b_interrupt(comedi_device *dev,unsigned short b_status, unsig } if(m_status & ~(CHSR_INT | CHSR_LINKC | CHSR_DONE | CHSR_MRDY | CHSR_DRDY | CHSR_DRQ1 | CHSR_DRQ0 | CHSR_ERROR | CHSR_SABORT | CHSR_XFERR | CHSR_LxERR_mask)){ - printk("unknown mite interrupt, ack! (m_status=%08x)\n", m_status); + rt_printk("unknown mite interrupt, ack! (m_status=%08x)\n", m_status); //mite_print_chsr(m_status); mite_dma_disarm(devpriv->mite, AO_DMA_CHAN ); writel(CHOR_DMARESET, devpriv->mite->mite_io_addr + MITE_CHOR(AO_DMA_CHAN)); @@ -2746,7 +2745,7 @@ static int ni_dio_insn_config(comedi_device *dev,comedi_subdevice *s, comedi_insn *insn,lsampl_t *data) { #ifdef DEBUG_DIO - printk("ni_dio_insn_config() chan=%d io=%d\n", + rt_printk("ni_dio_insn_config() chan=%d io=%d\n", CR_CHAN(insn->chanspec),data[0]); #endif switch(data[0]){ @@ -2775,7 +2774,7 @@ static int ni_dio_insn_bits(comedi_device *dev,comedi_subdevice *s, comedi_insn *insn,lsampl_t *data) { #ifdef DEBUG_DIO - printk("ni_dio_insn_bits() mask=0x%x bits=0x%x\n",data[0],data[1]); + rt_printk("ni_dio_insn_bits() mask=0x%x bits=0x%x\n",data[0],data[1]); #endif if(insn->n!=2)return -EINVAL; if(data[0]){ @@ -2799,7 +2798,7 @@ static int ni_m_series_dio_insn_config(comedi_device *dev,comedi_subdevice *s, comedi_insn *insn, lsampl_t *data) { #ifdef DEBUG_DIO - printk("ni_m_series_dio_insn_config() chan=%d io=%d\n", + rt_printk("ni_m_series_dio_insn_config() chan=%d io=%d\n", CR_CHAN(insn->chanspec), data[0]); #endif switch(data[0]) @@ -2827,7 +2826,7 @@ static int ni_m_series_dio_insn_bits(comedi_device *dev,comedi_subdevice *s, comedi_insn *insn, lsampl_t *data) { #ifdef DEBUG_DIO - printk("ni_m_series_dio_insn_bits() mask=0x%x bits=0x%x\n",data[0],data[1]); + rt_printk("ni_m_series_dio_insn_bits() mask=0x%x bits=0x%x\n",data[0],data[1]); #endif if(insn->n!=2)return -EINVAL; if(data[0]){ @@ -2852,7 +2851,7 @@ static int ni_serial_insn_config(comedi_device *dev,comedi_subdevice *s, case INSN_CONFIG_SERIAL_CLOCK: #ifdef DEBUG_DIO - printk("SPI serial clock Config cd\n", data[1]); + rt_printk("SPI serial clock Config cd\n", data[1]); #endif devpriv->serial_hw_mode = 1; devpriv->dio_control |= DIO_HW_Serial_Enable; @@ -2918,7 +2917,7 @@ static int ni_serial_insn_config(comedi_device *dev,comedi_subdevice *s, } else if(devpriv->serial_interval_ns > 0) { err = ni_serial_sw_readwrite8(dev,s,byte_out,&byte_in); } else { - printk("ni_serial_insn_config: serial disabled!\n"); + rt_printk("ni_serial_insn_config: serial disabled!\n"); return -EINVAL; } if(err < 0) return err; @@ -2940,7 +2939,7 @@ static int ni_serial_hw_readwrite8(comedi_device *dev,comedi_subdevice *s, int err = 0, count = 20; #ifdef DEBUG_DIO - printk("ni_serial_hw_readwrite8: outputting 0x%x\n", data_out); + rt_printk("ni_serial_hw_readwrite8: outputting 0x%x\n", data_out); #endif devpriv->dio_output &= ~DIO_Serial_Data_Mask; @@ -2962,7 +2961,7 @@ static int ni_serial_hw_readwrite8(comedi_device *dev,comedi_subdevice *s, /* Delay one bit per loop */ comedi_udelay((devpriv->serial_interval_ns + 999) / 1000); if(--count < 0) { - printk("ni_serial_hw_readwrite8: SPI serial I/O didn't finish in time!\n"); + rt_printk("ni_serial_hw_readwrite8: SPI serial I/O didn't finish in time!\n"); err = -ETIME; goto Error; } @@ -2975,7 +2974,7 @@ static int ni_serial_hw_readwrite8(comedi_device *dev,comedi_subdevice *s, if(data_in != NULL) { *data_in = devpriv->stc_readw(dev, DIO_Serial_Input_Register); #ifdef DEBUG_DIO - printk("ni_serial_hw_readwrite8: inputted 0x%x\n", *data_in); + rt_printk("ni_serial_hw_readwrite8: inputted 0x%x\n", *data_in); #endif } @@ -2992,7 +2991,7 @@ static int ni_serial_sw_readwrite8(comedi_device *dev,comedi_subdevice *s, unsigned char mask, input = 0; #ifdef DEBUG_DIO - printk("ni_serial_sw_readwrite8: outputting 0x%x\n", data_out); + rt_printk("ni_serial_sw_readwrite8: outputting 0x%x\n", data_out); #endif /* Wait for one bit before transfer */ @@ -3022,12 +3021,12 @@ static int ni_serial_sw_readwrite8(comedi_device *dev,comedi_subdevice *s, /* Input current bit */ if(devpriv->stc_readw(dev, DIO_Parallel_Input_Register) & DIO_SDIN) { -/* printk("DIO_P_I_R: 0x%x\n", devpriv->stc_readw(dev, DIO_Parallel_Input_Register)); */ +/* rt_printk("DIO_P_I_R: 0x%x\n", devpriv->stc_readw(dev, DIO_Parallel_Input_Register)); */ input |= mask; } } #ifdef DEBUG_DIO - printk("ni_serial_sw_readwrite8: inputted 0x%x\n", input); + rt_printk("ni_serial_sw_readwrite8: inputted 0x%x\n", input); #endif if(data_in) *data_in = input; @@ -3859,7 +3858,7 @@ static int GPCT_Set_Direction(comedi_device *dev,int chan,int direction) devpriv->gpct_command[chan] |= G_Up_Down(2); break; default: - printk("Error direction=0x%08x..",direction); + rt_printk("Error direction=0x%08x..",direction); return -EINVAL; } devpriv->stc_writew(dev, devpriv->gpct_command[chan], G_Command_Register(chan)); @@ -4194,7 +4193,7 @@ static int ni_gpct_insn_config(comedi_device *dev,comedi_subdevice *s, GPCT_Gen_Cont_Pulse(dev,insn->chanspec,data[2]); break; default: - printk("unsupported GPCT operation!\n"); + rt_printk("unsupported GPCT operation!\n"); return -EINVAL; } break; @@ -4215,8 +4214,8 @@ static int ni_gpct_insn_config(comedi_device *dev,comedi_subdevice *s, return insn->n; }else{ if(data[0]!=GPCT_ARM){ - printk("error: retval was %d\n",retval); - printk("data[0] is 0x%08x, data[1] is 0x%08x\n",data[0],data[1]); + rt_printk("error: retval was %d\n",retval); + rt_printk("data[0] is 0x%08x, data[1] is 0x%08x\n",data[0],data[1]); } return retval;