From: W. Trevor King <wking@drexel.edu>
Date: Fri, 2 Mar 2012 21:22:08 +0000 (-0500)
Subject: Use stepper.single_step instead of stepper.step_relative in AFM methods.
X-Git-Tag: v0.4~33
X-Git-Url: http://git.tremily.us/?a=commitdiff_plain;h=b680a4388dde3503fb7754f16606fe742fdfb53f;p=pyafm.git

Use stepper.single_step instead of stepper.step_relative in AFM methods.

This avoids problems with steppers in full-step mode always rounding
the asked-for half step back to the current position.  The drawback to
the new approach is that we loose backlash protection when moving away
from the surface, but the surface fitting condition ...?
---

diff --git a/pyafm/afm.py b/pyafm/afm.py
index fe3da22..fdacc81 100644
--- a/pyafm/afm.py
+++ b/pyafm/afm.py
@@ -68,7 +68,7 @@ class AFM (object):
 
         Uses `.piezo.get_surface_position()` to pinpoint the position
         of the surface.  Adjusts the stepper position as required via
-        `.stepper.step_relative()` to get within
+        `.stepper.single_step()` to get within
         `2*.stepper.step_size` meters of the surface.  Then adjusts
         the piezo to place the cantilever `depth` meters onto the
         surface.  Negative `depth`\s place the tip off the surface
@@ -115,7 +115,7 @@ class AFM (object):
         _LOG.debug('fine tune the stepper position')
         while pos_m < -stepper_tolerance:  # step back if we need to
             _LOG.debug('step back')
-            self.stepper.step_relative(-1, backlash_safe=True)
+            self.stepper.single_step(-1)
             try:
                 pos = self.piezo.get_surface_position(
                     axis_name=self.axis_name, max_deflection=target_def,
@@ -128,7 +128,7 @@ class AFM (object):
                       % (self.stepper.position, pos, pos_m))
         while pos_m > stepper_tolerance:  # step forward if we need to
             _LOG.debug('step forward')
-            self.stepper.step_relative(1)
+            self.stepper.single_step(1)
             try:
                 pos = self.piezo.get_surface_position(
                     axis_name=self.axis_name, max_deflection=target_def,