From: Matthew Ogilvie Date: Thu, 15 May 2008 04:35:47 +0000 (-0600) Subject: implement gitcvs.usecrlfattr X-Git-Tag: v1.5.6-rc0~13^2~2 X-Git-Url: http://git.tremily.us/?a=commitdiff_plain;h=8a06a632976ead;p=git.git implement gitcvs.usecrlfattr If gitcvs.usecrlfattr is set to true, git-cvsserver will consult the "crlf" for each file to determine if it should mark the file as binary (-kb). Signed-off-by: Matthew Ogilvie Signed-off-by: Junio C Hamano --- diff --git a/Documentation/config.txt b/Documentation/config.txt index 217980f48..036e61e2f 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -660,11 +660,21 @@ gitcvs.logfile:: Path to a log file where the CVS server interface well... logs various stuff. See linkgit:git-cvsserver[1]. +gitcvs.usecrlfattr + If true, the server will look up the `crlf` attribute for + files to determine the '-k' modes to use. If `crlf` is set, + the '-k' mode will be left blank, so cvs clients will + treat it as text. If `crlf` is explicitly unset, the file + will be set with '-kb' mode, which supresses any newline munging + the client might otherwise do. If `crlf` is not specified, + then 'gitcvs.allbinary' is used. See linkgit:gitattribute[5]. + gitcvs.allbinary:: - If true, all files are sent to the client in mode '-kb'. This - causes the client to treat all files as binary files which suppresses - any newline munging it otherwise might do. A work-around for the - fact that there is no way yet to set single files to mode '-kb'. + If true, all files not otherwise specified using + 'gitcvs.usecrlfattr' and an explicitly set or unset `crlf` + attribute are sent to the client in mode '-kb'. This + causes the client to treat them as binary files which + suppresses any newline munging it otherwise might do. gitcvs.dbname:: Database used by git-cvsserver to cache revision information @@ -695,8 +705,9 @@ gitcvs.dbTableNamePrefix:: linkgit:git-cvsserver[1] for details). Any non-alphabetic characters will be replaced with underscores. -All gitcvs variables except for 'gitcvs.allbinary' can also be -specified as 'gitcvs..' (where 'access_method' +All gitcvs variables except for 'gitcvs.usecrlfattr' and +'gitcvs.allbinary' can also be specified as +'gitcvs..' (where 'access_method' is one of "ext" and "pserver") to make them apply only for the given access method. diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt index b1106714b..4888b8604 100644 --- a/Documentation/git-cvsserver.txt +++ b/Documentation/git-cvsserver.txt @@ -301,11 +301,27 @@ checkout, diff, status, update, log, add, remove, commit. Legacy monitoring operations are not supported (edit, watch and related). Exports and tagging (tags and branches) are not supported at this stage. -The server should set the '-k' mode to binary when relevant, however, -this is not really implemented yet. For now, you can force the server -to set '-kb' for all files by setting the `gitcvs.allbinary` config -variable. In proper GIT tradition, the contents of the files are -always respected. No keyword expansion or newline munging is supported. +CRLF Line Ending Conversions +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +By default the server leaves the '-k' mode blank for all files, +which causes the cvs client to treat them as a text files, subject +to crlf conversion on some platforms. + +You can make the server use `crlf` attributes to set the '-k' modes +for files by setting the `gitcvs.usecrlfattr` config variable. +In this case, if `crlf` is explicitly unset ('-crlf'), then the +will set '-kb' mode, for binary files. If it `crlf` is set, +then the '-k' mode will explicitly be left blank. See +also linkgit:gitattributes[5] for more information about the `crlf` +attribute. + +Alternatively, if `gitcvs.usecrlfattr` config is not enabled +or if the `crlf` attribute is unspecified for a filename, then +the server uses the `gitcvs.allbinary` for the default setting. +If `gitcvs.allbinary` is set, then the files not otherwise +specified will default to '-kb' mode. Otherwise the '-k' mode +is left blank. Dependencies ------------ diff --git a/git-cvsserver.perl b/git-cvsserver.perl index 674892b81..58206aed7 100755 --- a/git-cvsserver.perl +++ b/git-cvsserver.perl @@ -502,7 +502,7 @@ sub req_add print $state->{CVSROOT} . "/$state->{module}/$filename\n"; # this is an "entries" line - my $kopts = kopts_from_path($filepart); + my $kopts = kopts_from_path($filename); $log->debug("/$filepart/1.$meta->{revision}//$kopts/"); print "/$filepart/1.$meta->{revision}//$kopts/\n"; # permissions @@ -533,9 +533,25 @@ sub req_add print "Checked-in $dirpart\n"; print "$filename\n"; - my $kopts = kopts_from_path($filepart); + my $kopts = kopts_from_path($filename); print "/$filepart/0//$kopts/\n"; + my $requestedKopts = $state->{opt}{k}; + if(defined($requestedKopts)) + { + $requestedKopts = "-k$requestedKopts"; + } + else + { + $requestedKopts = ""; + } + if( $kopts ne $requestedKopts ) + { + $log->warn("Ignoring requested -k='$requestedKopts'" + . " for '$filename'; detected -k='$kopts' instead"); + #TODO: Also have option to send warning to user? + } + $addcount++; } @@ -615,7 +631,7 @@ sub req_remove print "Checked-in $dirpart\n"; print "$filename\n"; - my $kopts = kopts_from_path($filepart); + my $kopts = kopts_from_path($filename); print "/$filepart/-1.$wrev//$kopts/\n"; $rmcount++; @@ -785,6 +801,7 @@ sub req_co argsplit("co"); my $module = $state->{args}[0]; + $state->{module} = $module; my $checkout_path = $module; # use the user specified directory if we're given it @@ -862,6 +879,7 @@ sub req_co # Don't want to check out deleted files next if ( $git->{filehash} eq "deleted" ); + my $fullName = $git->{name}; ( $git->{name}, $git->{dir} ) = filenamesplit($git->{name}); if (length($git->{dir}) && $git->{dir} ne './' @@ -892,7 +910,7 @@ sub req_co print $state->{CVSROOT} . "/$module/" . ( defined ( $git->{dir} ) and $git->{dir} ne "./" ? $git->{dir} . "/" : "" ) . "$git->{name}\n"; # this is an "entries" line - my $kopts = kopts_from_path($git->{name}); + my $kopts = kopts_from_path($fullName); print "/$git->{name}/1.$git->{revision}//$kopts/\n"; # permissions print "u=$git->{mode},g=$git->{mode},o=$git->{mode}\n"; @@ -1101,7 +1119,7 @@ sub req_update print $state->{CVSROOT} . "/$state->{module}/$filename\n"; # this is an "entries" line - my $kopts = kopts_from_path($filepart); + my $kopts = kopts_from_path($filename); $log->debug("/$filepart/1.$meta->{revision}//$kopts/"); print "/$filepart/1.$meta->{revision}//$kopts/\n"; @@ -1149,7 +1167,7 @@ sub req_update print "Merged $dirpart\n"; $log->debug($state->{CVSROOT} . "/$state->{module}/$filename"); print $state->{CVSROOT} . "/$state->{module}/$filename\n"; - my $kopts = kopts_from_path($filepart); + my $kopts = kopts_from_path("$dirpart/$filepart"); $log->debug("/$filepart/1.$meta->{revision}//$kopts/"); print "/$filepart/1.$meta->{revision}//$kopts/\n"; } @@ -1165,7 +1183,7 @@ sub req_update { print "Merged $dirpart\n"; print $state->{CVSROOT} . "/$state->{module}/$filename\n"; - my $kopts = kopts_from_path($filepart); + my $kopts = kopts_from_path("$dirpart/$filepart"); print "/$filepart/1.$meta->{revision}/+/$kopts/\n"; } } @@ -1416,7 +1434,7 @@ sub req_ci } print "Checked-in $dirpart\n"; print "$filename\n"; - my $kopts = kopts_from_path($filepart); + my $kopts = kopts_from_path($filename); print "/$filepart/1.$meta->{revision}//$kopts/\n"; } } @@ -2296,10 +2314,24 @@ sub kopts_from_path { my ($path) = @_; - # Once it exists, the git attributes system should be used to look up - # what attributes apply to this path. + if ( defined ( $cfg->{gitcvs}{usecrlfattr} ) and + $cfg->{gitcvs}{usecrlfattr} =~ /\s*(1|true|yes)\s*$/i ) + { + my ($val) = check_attr( "crlf", $path ); + if ( $val eq "set" ) + { + return ""; + } + elsif ( $val eq "unset" ) + { + return "-kb" + } + else + { + $log->info("Unrecognized check_attr crlf $path : $val"); + } + } - # Until then, take the setting from the config file unless ( defined ( $cfg->{gitcvs}{allbinary} ) and $cfg->{gitcvs}{allbinary} =~ /^\s*(1|true|yes)\s*$/i ) { # Return "" to give no special treatment to any path @@ -2311,6 +2343,23 @@ sub kopts_from_path } } +sub check_attr +{ + my ($attr,$path) = @_; + ensureWorkTree(); + if ( open my $fh, '-|', "git", "check-attr", $attr, "--", $path ) + { + my $val = <$fh>; + close $fh; + $val =~ s/.*: ([^:\r\n]*)\s*$/$1/; + return $val; + } + else + { + return undef; + } +} + # Generate a CVS author name from Git author information, by taking # the first eight characters of the user part of the email address. sub cvs_author diff --git a/t/t9401-git-cvsserver-crlf.sh b/t/t9401-git-cvsserver-crlf.sh new file mode 100755 index 000000000..b7a779b78 --- /dev/null +++ b/t/t9401-git-cvsserver-crlf.sh @@ -0,0 +1,178 @@ +#!/bin/sh +# +# Copyright (c) 2008 Matthew Ogilvie +# Parts adapted from other tests. +# + +test_description='git-cvsserver -kb modes + +tests -kb mode for binary files when accessing a git +repository using cvs CLI client via git-cvsserver server' + +. ./test-lib.sh + +q_to_nul () { + perl -pe 'y/Q/\000/' +} + +q_to_cr () { + tr Q '\015' +} + +marked_as () { + foundEntry="$(grep "^/$2/" "$1/CVS/Entries")" + if [ x"$foundEntry" = x"" ] ; then + echo "NOT FOUND: $1 $2 1 $3" >> "${WORKDIR}/marked.log" + return 1 + fi + test x"$(grep "^/$2/" "$1/CVS/Entries" | cut -d/ -f5)" = x"$3" + stat=$? + echo "$1 $2 $stat '$3'" >> "${WORKDIR}/marked.log" + return $stat +} + +not_present() { + foundEntry="$(grep "^/$2/" "$1/CVS/Entries")" + if [ -r "$1/$2" ] ; then + echo "Error: File still exists: $1 $2" >> "${WORKDIR}/marked.log" + return 1; + fi + if [ x"$foundEntry" != x"" ] ; then + echo "Error: should not have found: $1 $2" >> "${WORKDIR}/marked.log" + return 1; + else + echo "Correctly not found: $1 $2" >> "${WORKDIR}/marked.log" + return 0; + fi +} + +cvs >/dev/null 2>&1 +if test $? -ne 1 +then + test_expect_success 'skipping git-cvsserver tests, cvs not found' : + test_done + exit +fi +perl -e 'use DBI; use DBD::SQLite' >/dev/null 2>&1 || { + test_expect_success 'skipping git-cvsserver tests, Perl SQLite interface unavailable' : + test_done + exit +} + +unset GIT_DIR GIT_CONFIG +WORKDIR=$(pwd) +SERVERDIR=$(pwd)/gitcvs.git +git_config="$SERVERDIR/config" +CVSROOT=":fork:$SERVERDIR" +CVSWORK="$(pwd)/cvswork" +CVS_SERVER=git-cvsserver +export CVSROOT CVS_SERVER + +rm -rf "$CVSWORK" "$SERVERDIR" +test_expect_success 'setup' ' + echo "Simple text file" >textfile.c && + echo "File with embedded NUL: Q <- there" | q_to_nul > binfile.bin && + mkdir subdir && + echo "Another text file" > subdir/file.h && + echo "Another binary: Q (this time CR)" | q_to_cr > subdir/withCr.bin && + echo "Mixed up NUL, but marked text: Q <- there" | q_to_nul > mixedUp.c + echo "Unspecified" > subdir/unspecified.other && + echo "/*.bin -crlf" > .gitattributes && + echo "/*.c crlf" >> .gitattributes && + echo "subdir/*.bin -crlf" >> .gitattributes && + echo "subdir/*.c crlf" >> .gitattributes && + echo "subdir/file.h crlf" >> .gitattributes && + git add .gitattributes textfile.c binfile.bin mixedUp.c subdir/* && + git commit -q -m "First Commit" && + git clone -q --local --bare "$WORKDIR/.git" "$SERVERDIR" >/dev/null 2>&1 && + GIT_DIR="$SERVERDIR" git config --bool gitcvs.enabled true && + GIT_DIR="$SERVERDIR" git config gitcvs.logfile "$SERVERDIR/gitcvs.log" +' + +test_expect_success 'cvs co (default crlf)' ' + GIT_CONFIG="$git_config" cvs -Q co -d cvswork master >cvs.log 2>&1 && + test x"$(grep '/-k' cvswork/CVS/Entries cvswork/subdir/CVS/Entries)" = x"" +' + +rm -rf cvswork +test_expect_success 'cvs co (allbinary)' ' + GIT_DIR="$SERVERDIR" git config --bool gitcvs.allbinary true && + GIT_CONFIG="$git_config" cvs -Q co -d cvswork master >cvs.log 2>&1 && + marked_as cvswork textfile.c -kb && + marked_as cvswork binfile.bin -kb && + marked_as cvswork .gitattributes -kb && + marked_as cvswork mixedUp.c -kb && + marked_as cvswork/subdir withCr.bin -kb && + marked_as cvswork/subdir file.h -kb && + marked_as cvswork/subdir unspecified.other -kb +' + +rm -rf cvswork cvs.log +test_expect_success 'cvs co (use attributes/allbinary)' ' + GIT_DIR="$SERVERDIR" git config --bool gitcvs.usecrlfattr true && + GIT_CONFIG="$git_config" cvs -Q co -d cvswork master >cvs.log 2>&1 && + marked_as cvswork textfile.c "" && + marked_as cvswork binfile.bin -kb && + marked_as cvswork .gitattributes -kb && + marked_as cvswork mixedUp.c "" && + marked_as cvswork/subdir withCr.bin -kb && + marked_as cvswork/subdir file.h "" && + marked_as cvswork/subdir unspecified.other -kb +' + +rm -rf cvswork +test_expect_success 'cvs co (use attributes)' ' + GIT_DIR="$SERVERDIR" git config --bool gitcvs.allbinary false && + GIT_CONFIG="$git_config" cvs -Q co -d cvswork master >cvs.log 2>&1 && + marked_as cvswork textfile.c "" && + marked_as cvswork binfile.bin -kb && + marked_as cvswork .gitattributes "" && + marked_as cvswork mixedUp.c "" && + marked_as cvswork/subdir withCr.bin -kb && + marked_as cvswork/subdir file.h "" && + marked_as cvswork/subdir unspecified.other "" +' + +test_expect_success 'adding files' ' + cd cvswork/subdir && + echo "more text" > src.c && + GIT_CONFIG="$git_config" cvs -Q add src.c >cvs.log 2>&1 && + marked_as . src.c "" && + echo "psuedo-binary" > temp.bin && + cd .. && + GIT_CONFIG="$git_config" cvs -Q add subdir/temp.bin >cvs.log 2>&1 && + marked_as subdir temp.bin "-kb" && + cd subdir && + GIT_CONFIG="$git_config" cvs -Q ci -m "adding files" >cvs.log 2>&1 && + marked_as . temp.bin "-kb" && + marked_as . src.c "" +' + +cd "$WORKDIR" +test_expect_success 'updating' ' + git pull gitcvs.git && + echo 'hi' > subdir/newfile.bin && + echo 'junk' > subdir/file.h && + echo 'hi' > subdir/newfile.c && + echo 'hello' >> binfile.bin && + git add subdir/newfile.bin subdir/file.h subdir/newfile.c binfile.bin && + git commit -q -m "Add and change some files" && + git push gitcvs.git >/dev/null && + cd cvswork && + GIT_CONFIG="$git_config" cvs -Q update && + cd .. && + marked_as cvswork textfile.c "" && + marked_as cvswork binfile.bin -kb && + marked_as cvswork .gitattributes "" && + marked_as cvswork mixedUp.c "" && + marked_as cvswork/subdir withCr.bin -kb && + marked_as cvswork/subdir file.h "" && + marked_as cvswork/subdir unspecified.other "" && + marked_as cvswork/subdir newfile.bin -kb && + marked_as cvswork/subdir newfile.c "" && + echo "File with embedded NUL: Q <- there" | q_to_nul > tmpExpect1 && + echo "hello" >> tmpExpect1 && + cmp cvswork/binfile.bin tmpExpect1 +' + +test_done