From: Frank Mori Hess <fmhess@speakeasy.net>
Date: Tue, 5 Mar 2002 20:53:26 +0000 (+0000)
Subject: removed some redundant comments
X-Git-Tag: r0_7_64~87
X-Git-Url: http://git.tremily.us/?a=commitdiff_plain;h=69555970f6f696dd5ffeb6c4c12cb692aa58effd;p=comedi.git

removed some redundant comments
---

diff --git a/comedi/drivers/das16.c b/comedi/drivers/das16.c
index 0f183d03..e6fb4b6d 100644
--- a/comedi/drivers/das16.c
+++ b/comedi/drivers/das16.c
@@ -66,22 +66,6 @@ triggered conversions.
 
 Testing and debugging help provided by Daniel Koch.
 
-Options:
-	[0] - base io address
-	[1] - irq (optional)
-	[2] - dma (optional)
-	[3] - master clock speed in MHz (optional, 1 or 10, ignored if board
-		can probe clock speed, defaults to 1 otherwise)
-	[4] - analog input range lowest in microvolts (optional, only useful if your
-		board does not have software programmable gain)
-	[5] - analog input range highest in microvolts (optional, only useful if your
-		board does not have software programmable gain)
-	[6] - analog output range lowest in microvolts (optional)
-	[7] - analog output range highest in microvolts (optional)
-
-Both an irq line and dma channel are required for timed or externally
-triggered conversions.
-
 Keithley Manuals:
 	2309.PDF (das16)
 	4923.PDF (das1200, 1400, 1600)
diff --git a/comedi/drivers/das800.c b/comedi/drivers/das800.c
index 3b5e6959..bff206eb 100644
--- a/comedi/drivers/das800.c
+++ b/comedi/drivers/das800.c
@@ -35,25 +35,21 @@ Status: works, cio-das802/16 untested - email me if you have tested it
 Configuration options:
   [0] - I/O port base address
   [1] - IRQ (optional, required for timed or externally triggered conversions)
-*/
-/*
 
-This driver supports the Keithley boards:
-das-800
-das-801
-das-802
+Notes:
+	IRQ can be omitted, although the cmd interface will not work without it.
 
-and Measurement Computing (Computer Boards) models:
-cio-das800
-cio-das801
-cio-das802
-cio-das802/16
+	All entries in the channel/gain list must use the same gain and be
+	consecutive channels counting upwards in channel number (these are
+	hardware limitations.)
 
-Options:
-	[0] - base io address
-	[1] - irq
+	I've never tested the gain setting stuff since I only have a
+	DAS-800 board with fixed gain.
 
-irq can be omitted, although the cmd interface will not work without it.
+	The cio-das802/16 does not have a fifo-empty status bit!  Therefore
+	only fifo-half-full transfers are possible with this card.
+*/
+/*
 
 cmd triggers supported:
 	start_src:      TRIG_NOW | TRIG_EXT
@@ -62,16 +58,6 @@ cmd triggers supported:
 	convert_src:    TRIG_TIMER | TRIG_EXT
 	stop_src:       TRIG_NONE | TRIG_COUNT
 
-NOTES:
-	All entries in the channel/gain list must use the same gain and be
-	consecutive channels counting upwards in channel number (these are
-	hardware limitations.)
-
-	I've never tested the gain setting stuff since I only have a
-	DAS-800 board with fixed gain.
-
-	The cio-das802/16 does not have a fifo-empty status bit!  Therefore
-	only fifo-half-full transfers are possible with this card.
 
 */