From: Mike Frysinger Date: Mon, 7 Aug 2006 23:53:36 +0000 (-0000) Subject: fixups from Benno Schulenberg #143079 X-Git-Tag: v2.1.1~82 X-Git-Url: http://git.tremily.us/?a=commitdiff_plain;h=43dc33c77e1c842bebb27fb427777b5e7897db91;p=portage.git fixups from Benno Schulenberg #143079 svn path=/main/trunk/; revision=4189 --- diff --git a/man/ebuild.1 b/man/ebuild.1 index d056b2582..cdac99e3a 100644 --- a/man/ebuild.1 +++ b/man/ebuild.1 @@ -1,7 +1,6 @@ .TH "EBUILD" "1" "Dec 2005" "Portage 2.1" "Portage" .SH "NAME" -ebuild \- manual page for the ebuild program, a low level interface to -the Portage system. +ebuild \- a low level interface to the Portage system .SH "SYNOPSIS" .B ebuild .I file command [command]\fR... @@ -9,9 +8,9 @@ the Portage system. The ebuild program is a direct interface to the Portage system. It allows for direct action upon an ebuild with specific subcommands or groups of commands to perform in a specific ebuild's context and -functions. Accepting an ebuild script and one or more commands +functions. Accepting an ebuild script and one or more commands as arguments, the ebuild program parses the ebuild script and -execute the specified commands. Commands exist to fetch sources, +executes the specified commands. Commands exist to fetch sources, unpack sources, compile sources, install object files into a temporary directory "image", merge the image to the local filesystem, create a bzipped tarball package out of the image, and more. @@ -21,11 +20,11 @@ This must be a valid ebuild script. For further information read .SH "COMMANDS" .TP .BR help -Show a condensed form of the man page along with a lot of package +Shows a condensed form of this man page along with a lot of package specific information. .TP .BR setup -Run all package specific setup actions and exotic system checks. +Runs all package-specific setup actions and exotic system checks. .TP .BR clean Cleans the temporary build directory that Portage has created for @@ -38,12 +37,11 @@ on what this variable is, run \fIemerge [\-v] info\fR, or to override this variable, see \fBmake.conf\fR(5). Note: Portage cleans up almost everything after a package has been -successfully merged unless FEATURES contains 'noclean'. Adding noclean +successfully merged unless FEATURES contains 'noclean'. Adding noclean to FEATURES will cause a lot of files to remain and will consume large -amounts of space, very quickly. It is not recommended to leave this on -unless you have use for the sources post\-merge. Optionally one may, -manual clean \fIrm \-rf /var/tmp/portage\fR will take care of all -of these files. +amounts of space, very quickly. It is not recommended to leave this on, +unless you have use for the sources post\-merge. Optionally, one may +manually clean these files with \fIrm \-rf /var/tmp/portage\fR. .TP .BR fetch Checks to see if all the sources specified in SRC_URI are available in @@ -53,15 +51,15 @@ download them from the locations specified in SRC_URI. If multiple download locations are listed for a particular file, Portage pings each location to see which location is closer. (May not be true presently.) The Gentoo Linux mirrors defined by GENTOO_MIRRORS is -always considered first. If for some reason the current or +always considered first. If for some reason the current or just\-downloaded sources' md5 digests don't match those recorded in files/digest\-[package]\-[version\-rev], a warning is printed and ebuild exits with an error code of 1. .TP .BR digest Creates a digest file for the package in -/usr/portage/[category]/[package]/files/. This digest file lists the -md5sum's of all the files found in the SRC_URI. If the fetched source +/usr/portage/[category]/[package]/files/. This digest file lists the +md5sums of all the files found in the SRC_URI. If the fetched source of the package is corrupt/bogus in some way, the md5sum will catch this. .TP .BR manifest @@ -75,29 +73,29 @@ Extracts the sources to a subdirectory in the \fIbuild directory\fR file. If no src_unpack() function has been specified, a default src_unpack() function is used that extracts all the files specified in SRC_URI. The sources are normally extracted to -${BUILD_PREFIX}/[package]\-[version\-rev]/work. This particular directory +${BUILD_PREFIX}/[package]\-[version\-rev]/work. This particular directory can be referenced by using the ${WORKDIR} variable. If you're creating an ebuild, you'll want to make sure that the S -(source directory) variable defined at at the top of your ebuild script -points to the directory that contains your extracted sources. This +(source directory) variable defined at the top of your ebuild script +points to the directory that contains your extracted sources. This directory is defined by default to be ${WORKDIR}/${P}, so it is not often required. The src_unpack() function is also responsible for making the appropriate patches to the sources so that they're ready for compilation. .TP .BR compile -Compiles the extracted sources by running the the \fIsrc_compile()\fR +Compiles the extracted sources by running the \fIsrc_compile()\fR function specified in the ebuild file. When src_compile() starts, the current working directory will be set to ${S}. When src_compile() completes, the sources should be fully compiled. .TP .BR test -Run package specific test cases to verify that everything was built +Runs package-specific test cases to verify that everything was built properly. .TP .BR preinst -Run package specific actions that need to be done before the package +Runs package-specific actions that need to be done before the package is installed into the live filesystem. .TP .BR install @@ -105,16 +103,16 @@ Installs the package to the temporary \fIinstall directory\fR by running the \fIsrc_install()\fR function. When completed, the \fIinstall directory\fR (${BUILD_PREFIX}/[package]\-[version\-rev]/image) will contain all the files that should either be merged to the local -file system or included in a binary package. +filesystem or included in a binary package. .TP .BR postinst -Run package specific actions that need to be done after the package +Runs package-specific actions that need to be done after the package is installed into the live filesystem. Usually helpful messages are shown here. .TP .BR qmerge This function installs all the files in the \fIinstall directory\fR -to the live filesystem. The process works as follows: first, the +to the live filesystem. The process works as follows: first, the \fIpkg_preinst()\fR function (if specified) is run. Then, the files are merged into the live filesystem, and the installed files' md5 digests are recorded in @@ -130,26 +128,26 @@ will perform all these steps for you, stopping along the way if a particular step doesn't complete successfully. .TP .BR unmerge -This function first executes the \fIpkg_prerm\fR function (if specified). +This function first executes the \fIpkg_prerm()\fR function (if specified). Then it removes all files from the live filesystem that have a valid md5 checksum and mtime in the package contents file. Any empty directories -are recursively removed. Finally, it runs \fIpkg_postrm\fR function (if +are recursively removed. Finally, it runs \fIpkg_postrm()\fR function (if specified). It is safe to merge a new version of a package first and then unmerge the old one. In fact, this is the recommended package upgrade method. .TP .BR prerm -Run package specific actions that need to be executed before the package is +Runs package-specific actions that need to be executed before the package is removed from the filesystem. See also \fIunmerge\fR. .TP .BR postrm -Run package specific actions that need to be executed after the package is +Runs package-specific actions that need to be executed after the package is removed from the filesystem. See also \fIunmerge\fR. .TP .BR config -Run package specific actions needed to be executed after the emerge -process has completed. This usually entails configuration file -setup or other similar setups that the user may wish to run. +Runs package-specific actions that need to be executed after the emerge +process has completed. This usually entails setup of configuration files +or other similar setups that the user may wish to run. .TP .BR package This command is a lot like the \fImerge\fR command, except that after @@ -160,7 +158,7 @@ ${PKGDIR}/${CATEGORY} that points to the package in ${PKGDIR}/All. .TP .BR rpm Builds a RedHat RPM package from the files in the temporary -\fIinstall directory\fR. At the moment, the ebuild's dependency +\fIinstall directory\fR. At the moment, the ebuild's dependency information is not incorporated into the RPM. .SH "REPORTING BUGS" Please report bugs via http://bugs.gentoo.org/