From: Tim Yamin <plasmaroo@gentoo.org>
Date: Sat, 23 Oct 2004 22:24:51 +0000 (+0000)
Subject: >> 3.1.0b.
X-Git-Tag: v3.4.10.902~611
X-Git-Url: http://git.tremily.us/?a=commitdiff_plain;h=389b51f0c938359b9ea1b0f658699bc83b59fff7;p=genkernel.git

>> 3.1.0b.


git-svn-id: svn+ssh://svn.gentoo.org/var/svnroot/genkernel/trunk@141 67a159dc-881f-0410-a524-ba9dfbe2cb84
---

diff --git a/README b/README
index 4ae8d6d..8d7e9ea 100644
--- a/README
+++ b/README
@@ -21,6 +21,9 @@ IMPORTANT KERNEL NOTES:
   - If you want Bootsplash, you MUST have VESAFB enabled for 2.6,
     other framebuffers won't work.  You MUST also enable
     "video mode selection support" and "Framebuffer Console support"
+  - From gentoo-dev-sources-2.6.8 and above, bootsplash has been replaced
+    with gensplash.  Gensplash has the same kernel configuration requirements
+    as bootsplash, but works properly with any framebuffer device.
   - To build a kernel with Genkernel you must have  
     "Block devices->Loopback device support"  
     "Block devices->RAM disk support"
diff --git a/gen_cmdline.sh b/gen_cmdline.sh
index 4b336cc..eb8f71c 100755
--- a/gen_cmdline.sh
+++ b/gen_cmdline.sh
@@ -31,13 +31,18 @@ longusage() {
   echo "	--oldconfig		Implies --no-clean and runs a 'make oldconfig'"
   echo "	--bootsplash		Install bootsplash support to the initrd"
   echo "	--no-bootsplash		Do not use bootsplash"
+  echo "	--gensplash		Install gensplash support into bzImage"
+  echo "	--no-gensplash		Do not use gensplash"
   echo "	--install		Install the kernel after building"
   echo "	--no-install		Do not install the kernel after building"
   echo "	--no-initrdmodules	Don't copy any modules to the initrd"
-  echo "	--udev			Add in udev support."
+  echo "	--udev			Enables udev support in your initrd"
+  echo "	--no-udev		Remove udev support."
   echo "	--callback=<...>	Run the specified arguments after"
   echo "				the kernel and modules have been"
   echo "				compiled."
+  echo "	--postconf=<...>	Run the specified arguments after"
+  echo "				the kernel has been configured."
   echo "  Kernel settings"
   echo "	--kerneldir=<dir>	Location of the kernel sources"
   echo "	--kernel-config=<file>	Kernel configuration file to use for compilation"
@@ -57,9 +62,10 @@ longusage() {
   echo "	--no-mountboot		Don't mount /boot automatically"  
   echo "  Initialization"
   echo "	--bootsplash=<theme>	Force bootsplash using <theme>."
+  echo "	--gensplash=<theme>	Force gensplash using <theme>."
   echo "	--do-keymap-auto	Forces keymap selection at boot."
   echo "	--no-lvm2		Don't add in LVM2 support."
-  echo "        --bootloader=grub       Add new kernel to GRUB configuration"
+  echo "	--bootloader=grub	Add new kernel to GRUB configuration"
   echo "  Internals"
   echo "	--arch-override=<arch>	Force to arch instead of autodetect"
   echo "	--cachedir=<dir>	Override the default cache location"
@@ -213,18 +219,41 @@ parse_cmdline() {
 	      ;;
 	      --bootsplash=*)
 		      CMD_BOOTSPLASH=1
+		      CMD_GENSPLASH=0
 		      BOOTSPLASH_THEME=`parse_opt "$*"`
 		      print_info 2 "CMD_BOOTSPLASH: $CMD_BOOTSPLASH"
+		      print_info 2 "CMD_GENSPLASH: $CMD_GENSPLASH"
 		      print_info 2 "BOOTSPLASH_THEME: $BOOTSPLASH_THEME"
 	      ;;
 	      --bootsplash)
 		      CMD_BOOTSPLASH=1
+		      CMD_GENSPLASH=0
 		      print_info 2 "CMD_BOOTSPLASH: $CMD_BOOTSPLASH"
+		      print_info 2 "CMD_GENSPLASH: $CMD_GENSPLASH"
 	      ;;
 	      --no-bootsplash)
 		      CMD_BOOTSPLASH=0
 		      print_info 2 "CMD_BOOTSPLASH: $CMD_BOOTSPLASH"
 	      ;;
+	      --gensplash=*)
+		      CMD_GENSPLASH=1
+		      CMD_BOOTSPLASH=0
+		      GENSPLASH_THEME=`parse_opt "$*"`
+		      print_info 2 "CMD_GENSPLASH: $CMD_GENSPLASH"
+		      print_info 2 "GENSPLASH_THEME: $GENSPLASH_THEME"
+		      print_info 2 "CMD_BOOTSPLASH: $CMD_BOOTSPLASH"
+	      ;;
+	      --gensplash)
+		      CMD_GENSPLASH=1
+		      CMD_BOOTSPLASH=0
+		      GENSPLASH_THEME='default'
+		      print_info 2 "CMD_GENSPLASH: $CMD_GENSPLASH"
+		      print_info 2 "CMD_BOOTSPLASH: $CMD_BOOTSPLASH"
+	      ;;
+	      --no-gensplash)
+		      CMD_GENSPLASH=0
+	              print_info 2 "CMD_GENSPLASH: $CMD_GENSPLASH"
+	      ;;
 	      --install)
 		      CMD_NOINSTALL=0
 		      print_info 2 "CMD_NOINSTALL: $CMD_NOINSTALL"
@@ -241,10 +270,18 @@ parse_cmdline() {
 		      CMD_UDEV=1
 		      print_info 2 "CMD_UDEV: $CMD_UDEV"
 	      ;;
+	      --no-udev)
+		      CMD_UDEV=0
+		      print_info 2 "CMD_UDEV: $CMD_UDEV"
+	      ;;
 	      --callback*)
 		      CMD_CALLBACK=`parse_opt "$*"`
 		      print_info 2 "CMD_CALLBACK: $CMD_CALLBACK/$*"
 	      ;;
+	      --postconf*)
+		      CMD_POSTCONF=`parse_opt "$*"`
+		      print_info 2 "CMD_POSTCONF: $CMD_POSTCONF/$*"
+	      ;;
 	      --tempdir*)
 	        TEMP=`parse_opt "$*"`
 	        print_info 2 "TEMP: $TEMP"
diff --git a/gen_compile.sh b/gen_compile.sh
index e18ea68..94f068c 100644
--- a/gen_compile.sh
+++ b/gen_compile.sh
@@ -332,6 +332,9 @@ compile_modutils() {
 }
 
 compile_module_init_tools() {
+	# I've disabled dietlibc support for the time being since the
+	# version we use misses a few needed system calls.
+
 	local ARGS
 	if [ ! -f "${MODULE_INIT_TOOLS_BINCACHE}" ]
 	then
@@ -345,12 +348,12 @@ compile_module_init_tools() {
 		cd "${MODULE_INIT_TOOLS_DIR}"
 		print_info 1 'module-init-tools: >> Configuring'
 
-		if [ "${USE_DIETLIBC}" -eq '1' ]
-		then
-			extract_dietlibc_bincache
-			OLD_CC="${UTILS_CC}"
-			UTILS_CC="${TEMP}/diet/bin/diet ${UTILS_CC}"
-		fi
+#		if [ "${USE_DIETLIBC}" -eq '1' ]
+#		then
+#			extract_dietlibc_bincache
+#			OLD_CC="${UTILS_CC}"
+#			UTILS_CC="${TEMP}/diet/bin/diet ${UTILS_CC}"
+#		fi
 
 		export_utils_args
 		./configure >> ${DEBUGFILE} 2>&1 ||
@@ -359,11 +362,11 @@ compile_module_init_tools() {
 		print_info 1 '                   >> Compiling...'
 		compile_generic "all" utils
 
- 		if [ "${USE_DIETLIBC}" -eq '1' ]
-		then
-			clean_dietlibc_bincache
-			UTILS_CC="${OLD_CC}"
-		fi
+# 		if [ "${USE_DIETLIBC}" -eq '1' ]
+#		then
+#			clean_dietlibc_bincache
+#			UTILS_CC="${OLD_CC}"
+#		fi
 
 		print_info 1 '                   >> Copying to cache...'
 		[ -f "${TEMP}/${MODULE_INIT_TOOLS_DIR}/insmod.static" ] ||
diff --git a/gen_determineargs.sh b/gen_determineargs.sh
index 1b0ea6f..c5feead 100644
--- a/gen_determineargs.sh
+++ b/gen_determineargs.sh
@@ -116,6 +116,18 @@ determine_real_args() {
 		BOOTSPLASH=0
 	fi
 
+	if [ "${CMD_GENSPLASH}" != '' ]
+	then
+		GENSPLASH=${CMD_GENSPLASH}
+	fi
+
+	if isTrue ${GENSPLASH}
+	then
+		GENSPLASH=1
+	else
+		GENSPLASH=0
+	fi
+
 	if isTrue ${COMPRESS_INITRD}
 	then
 		COMPRESS_INITRD=1
@@ -194,7 +206,9 @@ determine_real_args() {
 	if isTrue "${CMD_UDEV}"
 	then
 		UDEV=1
+		DEVFS=0
 	else
 		UDEV=0
+		DEVFS=1
 	fi
 }
diff --git a/gen_initrd.sh b/gen_initrd.sh
index f0d473e..9f025cd 100644
--- a/gen_initrd.sh
+++ b/gen_initrd.sh
@@ -191,7 +191,7 @@ create_initrd_aux() {
 		group="$(echo $group_modules | cut -d_ -f2 | tr "[:upper:]" "[:lower:]")"
 		echo -n "${group} " >> "${TEMP}/initrd-temp/etc/initrd.defaults"
 	done
-	echo "\"" >> "${TEMP}/initrd-temp/etc/initrd.defaults"	
+	echo '"' >> "${TEMP}/initrd-temp/etc/initrd.defaults"	
 
 	if [ -f "${GK_SHARE}/${ARCH}/modprobe" ]
 	then
diff --git a/generic/initrd.defaults b/generic/initrd.defaults
index 7e6f832..18117fa 100644
--- a/generic/initrd.defaults
+++ b/generic/initrd.defaults
@@ -17,8 +17,8 @@ MISCOPTS='idebug detect'
 # Only sections that are in by default or those that
 # are not module groups need to be defined here...
 
-HWOPTS="usb firewire keymap cache lvm2"
-MY_HWOPTS="usb firewire lvm2"
+HWOPTS='usb firewire keymap cache lvm2'
+MY_HWOPTS='usb firewire lvm2'
 
 QUIET=1
 ROOT_LINKS='bin sbin lib lib64 boot usr opt'
@@ -33,3 +33,4 @@ fi
 
 REAL_ROOT=''
 CDROOT=0
+CDROOT_DEV=''
diff --git a/generic/initrd.scripts b/generic/initrd.scripts
index bd9b751..f2fed9b 100644
--- a/generic/initrd.scripts
+++ b/generic/initrd.scripts
@@ -34,15 +34,28 @@ findcdmount() {
 		do
 			echo -e "${GOOD}>>${NORMAL} Attempting to mount CD:- ${x}"
 			mount -r ${x} /newroot/mnt/cdrom > /dev/null 2>&1
-			if [ "$?" = "0" ]
+
+			if [ "$?" = '0' ]
 			then
 				REAL_ROOT="${x}"
 				break
+
+				## FIXME: I need a proper identifier present on all LiveCDs to work across
+				##        all architectures.
+
+#				# Check for a LiveCD
+#				if [ -e /newroot/mnt/cdrom/.gentoo_LiveCD ]
+#				then
+#					REAL_ROOT="${x}"
+#					break
+#				else
+#					umount /newroot/mnt/cdrom
+#				fi
 			fi
 		done
 		if [ "${REAL_ROOT}" != "" ]
 		then
-			echo -e "${GOOD}>>${NORMAL} CD medium found on $1"
+			echo -e "${GOOD}>>${NORMAL} CD medium found on ${x}"
 		fi
 	fi
 }
@@ -59,6 +72,8 @@ runUdev() {
 	# using information from /sys, and only those
 	# devices (since other are not needed for boot).
 
+	# We also do VC's for keymap support.
+
 	for x in block/*
 	do
 		export DEVPATH="/${x}"
@@ -73,6 +88,21 @@ runUdev() {
 			fi
 		done
 	done
+	for x in class/tty
+	do
+		export DEVPATH="/${x}"
+		/sbin/udev class
+
+		for y in ${x}/*
+		do
+			if [ -f "${y}/dev" ]
+			then
+				export DEVPATH="/${y}"
+				/sbin/udev class
+			fi
+		done
+	done
+	
 	cd /
 
 	unset -v ACTION DEVPATH UDEV_NO_SLEEP
diff --git a/generic/linuxrc b/generic/linuxrc
index 2e5d0d3..8abf30f 100644
--- a/generic/linuxrc
+++ b/generic/linuxrc
@@ -34,14 +34,21 @@ do
 			CDROOT=1
 			REAL_ROOT=''
 		;;
+		cdroot\=*)
+			CDROOT=1
+			CDROOT_DEV=`parse_opt "${x}"`
+			REAL_ROOT=''
+		;;
 		devfs)
 			USE_DEVFS_NORMAL=1
+			USE_UDEV_NORMAL=0
 		;;
 		nodevfs)
 			USE_DEVFS_NORMAL=0
 		;;
 		udev)
 			USE_UDEV_NORMAL=1
+			USE_DEVFS_NORMAL=0
 		;;
 		noudev)
 			USE_UDEV_NORMAL=0
@@ -55,22 +62,27 @@ do
 		real_init\=*)
 			REAL_INIT=`parse_opt "${x}"`
 		;;
+		scandelay)
+			SDELAY=10
+		;;
 		*)
 		;;
 	esac
 done
 
+[ -e /proc/scsi/scsi ] && echo 'scsi add-single-device 0 0 0 0' > /proc/scsi/scsi
+
 # Scan CMDLINE for any "doscsi" or "noscsi"-type arguments
 for x in $HWOPTS
 do
 	for y in $CMDLINE
 	do
-		if [ "$y" = "do${x}" ] 
+		if [ "${y}" = "do${x}" ]
 		then
 			MY_HWOPTS="${MY_HWOPTS} $x"
-		elif [ "$y" = "no${x}" ] 
+		elif [ "${y}" = "no${x}" ]
 		then
-			MY_HWOPTS="`echo ${MY_HWOPTS} | sed -e 's/${x}//g' -`"
+			MY_HWOPTS="`echo ${MY_HWOPTS} | sed -e \"s/${x}//g\" -`"
 		fi
 	done
 done
@@ -91,36 +103,34 @@ fi
 chooseKeymap() {
 	echo -e "${GOOD}>>${NORMAL}${BOLD} Loading keymaps...${NORMAL}"
 	cat /lib/keymaps/keymapList
-	read -p '<< Load keymap: ' keymap
+	read -t 10 -p '<< Load keymap (Enter for default): ' keymap
 	if [ -e /lib/keymaps/${keymap}.map ]
 	then
 		echo -e "${GOOD}>>${NORMAL}${BOLD} Loading the ''${keymap}'' keymap...${NORMAL}"
 		loadkmap < /lib/keymaps/${keymap}.map
 	elif [ "$keymap" = '' ]
 	then
-		echo -e "${GOOD}>>${NORMAL}${BOLD} Loading default US keymap...${NORMAL}"
-		loadkmap < /lib/keymaps/us.map
+		echo -e "${GOOD}>>${NORMAL}${BOLD} Keeping default keymap...${NORMAL}"
 	else
 		echo -e "${BAD}!! ${NORMAL}${BOLD}Sorry, but keymap ''${keymap}'' is invalid!${NORMAL}"
 		chooseKeymap
 	fi
 }
 
-[ "${DO_keymap}" ] && chooseKeymap
 echo -e "${GOOD}>>${NORMAL}${BOLD} Mounting filesystems${NORMAL}"
 
 # Check udev is on...
-[ "${KMAJOR}" -ge 2 ] && USE_UDEV_SUPPORT=1
-[ "${KMAJOR}" -eq 2 -a "${KMINOR}" -ge '6' ] && USE_UDEV_SUPPORT=1
-[ "${USE_UDEV_SUPPORT}" -eq '1' -a -f /sbin/udev -a "${USE_UDEV_NORMAL}" -ne 0 ] && USE_UDEV_NORMAL=1
-
-# Disable udev support if /dev is already mounted as devfs
-[ -e /dev/.devfsd ] && USE_UDEV_NORMAL=0
+# [ "${KMAJOR}" -ge 2 ] && USE_UDEV_SUPPORT=1
+# [ "${KMAJOR}" -eq 2 -a "${KMINOR}" -ge '6' -a ! "${USE_UDEV_SUPPORT}" -eq '0' ] && USE_UDEV_SUPPORT=1
+[ "${USE_UDEV_NORMAL}" -eq '1' -a ! -x /sbin/udev ] && USE_UDEV_NORMAL=0
 
 # If using 2.4 and udev; back off...
 [ "${KMAJOR}" -eq 2 -a "${KMINOR}" -lt '6' -a "${USE_UDEV_NORMAL}" -eq 1 ] &&
 	USE_UDEV_NORMAL=0
 
+# Disable devfs if we want udev...
+[ -e /dev/.devfsd -a "${USE_UDEV_NORMAL}" -eq 1 ] && echo '>> Enabling devfsd in favour of udev; use "nodevfs" if this is not intended...' && USE_UDEV_NORMAL=0
+
 mkdir /newroot
 if [ "${CDROOT}" -eq '1' ]
 then
@@ -129,14 +139,14 @@ then
 	if [ "${USE_UDEV_NORMAL}" -eq '1' ]
 	then
 		# Udev is semi-broken on non /sys sysfs mount points.
-		mount -t sysfs sys /sys 2> /dev/null
-		mount -t sysfs sys /newroot/sys 2> /dev/null
+		mount -t sysfs none /sys
 		[ "$?" -eq '0' ] || USE_UDEV_NORMAL=0
 	fi
 
 	if [ "${USE_UDEV_NORMAL}" -eq '1' ]
 	then
 		cd /sys
+		kill_devfsd
 		runUdev
 		mv /dev/* /newroot/dev
 	else
@@ -144,14 +154,26 @@ then
 		then
 			mount -t devfs devfs /newroot/dev
 			devfsd /newroot/dev -np
-			sleep 1
+			if [ -n "${SDELAY}" ]; then
+				sleep ${SDELAY}
+			else
+				sleep 1
+			fi
 		fi
 	fi
 
-	findcdmount /newroot/dev/cdroms/*
+	if [ "${CDROOT_DEV}" = '' ]
+	then
+		findcdmount /newroot/dev/cdroms/*
+
+		# Not in /dev/cdroms: try /dev/ide/cd
+		[ "${REAL_ROOT}" = '' ] && findcdmount /newroot/dev/ide/cd/*
+		[ "${REAL_ROOT}" = '' ] && findcdmount /newroot/dev/sr0
+	else
+		# Device specified on command line
+		findcdmount /newroot/${CDROOT_DEV}
+	fi
 
-	# Not in /dev/cdroms: try /dev/ide/cd
-	[ "${REAL_ROOT}" = '' ] && findcdmount /newroot/dev/ide/cd/*
 	if [ "${REAL_ROOT}" = '' ]
 	then
 		# Undo stuff
@@ -167,10 +189,23 @@ then
 	fi
 fi
 
+if [ "${DO_keymap}" ]
+then
+	if [ ! -e /dev/vc/0 ]
+	then
+		DEVBIND=1
+		mount -o bind /newroot/dev /dev
+	fi
+	chooseKeymap
+	[ "${DEVBIND}" -eq '1' ] && umount /dev
+fi
+
+# FIX: indent me in one $CDROOT -eq '0'
+
 # Try to mount sysfs, and if it fails, do not use udev
 if [ "${USE_UDEV_NORMAL}" -eq '1' -a "${CDROOT}" -eq '0' ]
 then
-	mount -t sysfs sys /sys 2> /dev/null
+	mount -t sysfs none /sys
 	[ "$?" -eq '0' ] || USE_UDEV_NORMAL=0
 fi
 
@@ -380,9 +415,12 @@ then
 elif [ "${CDROOT}" -eq '1' ]
 then
 	umount /tmp/.initrd/proc || echo "*: Failed to unmount the initrd /proc!"
-	umount /dev > /dev/null 2>&1
-	mount -n --move /tmp/.initrd/dev dev || echo '*: Failed to move over the /dev tree!'
+	umount /dev 2>/dev/null
+	mount -n --move /tmp/.initrd/dev dev 2>/dev/null
 	rm /tmp/.initrd/dev -rf || '*: Failed to remove the initrd /dev!'
+
+	umount /sys 2>/dev/null
+	umount /tmp/.initrd/sys 2>/dev/null
 fi
 echo -n '.'
 
diff --git a/genkernel b/genkernel
index 59a52c0..db24bef 100755
--- a/genkernel
+++ b/genkernel
@@ -1,7 +1,7 @@
 #!/bin/bash
 # Genkernel v3
 
-GK_V='3.0.2g'
+GK_V='3.1.0b'
 TEMP='/var/tmp/genkernel'
 TODEBUGCACHE=1 # Until an error occurs or DEBUGFILE is fully qualified.
 
@@ -147,6 +147,55 @@ then
 	# Make deps
 	compile_dep
 
+	# Make prepare [2.6]
+	[ "${VER}" -gt '2' ] || [ "${VER}" -eq '2' -a "${PAT}" -ge '6' ] && compile_generic prepare kernel
+
+	# Run postconf
+	if [ "${CMD_POSTCONF}" != '' ]
+	then
+		print_info 1 '' 1 0
+		print_info 1 "Preparing to run postconf: \"${CMD_POSTCONF}\"" 0
+
+		CALLBACK_ESCAPE=0
+		CALLBACK_COUNT=0
+
+		trap "CALLBACK_ESCAPE=1" TERM KILL INT QUIT ABRT
+		while [[ ${CALLBACK_ESCAPE} -eq 0 && ${CALLBACK_COUNT} -lt 5 ]]
+		do
+			sleep 1; echo -n '.';
+			let CALLBACK_COUNT=${CALLBACK_COUNT}+1
+		done
+
+		if [ "${CALLBACK_ESCAPE}" -eq 0 ]
+		then
+			echo
+			echo
+			eval ${CMD_POSTCONF} | tee -a ${DEBUGFILE}
+			echo
+			print_info 1 "<<< Postconf callback exit status: ${PIPESTATUS[0]}"
+		else
+			echo
+			print_info 1 '>>> Postconf cancelled...'
+		fi
+		trap - TERM KILL INT QUIT ABRT
+		print_info 1 '' 1 0
+	fi
+
+	if [ "${GENSPLASH}" -eq '1' ]
+	then
+		if [ -x /sbin/splash ]
+		then
+			[ -z "${GENSPLASH_THEME}" ] && [ -e /etc/conf.d/splash ] && source /etc/conf.d/splash
+			[ -z "${GENSPLASH_THEME}" ] && GENSPLASH_THEME=default
+			print_info 1 "	>> Installing gensplash [ using the ${GENSPLASH_THEME} theme ]..."
+			sed -i 's:$(obj)/gen_init_cpio $(initramfs-y) FORCE:$(if $(shell [ ! -f $(obj)/initramfs_data.cpio ] && echo '1' ), $(obj)/gen_init_cpio $(initramfs-y)):' ${KERNEL_DIR}/usr/Makefile
+			splash_geninitramfs -g ${KERNEL_DIR}/usr/initramfs_data.cpio.gz ${GENSPLASH_THEME}
+			gunzip ${KERNEL_DIR}/usr/initramfs_data.cpio.gz
+		else
+			print_warning 1 '		>> No splash detected; skipping!'
+		fi
+	fi
+
 	# Compile kernel
 	compile_kernel
 
@@ -216,8 +265,8 @@ then
 	fi
 
 	compile_devfsd
-	[ "${VER}" -lt '2' ] || [ "${VER}" -eq '2' -a "${PAT}" -lt '6' -a "${UDEV}" -eq '1' ] && UDEV=0 && print_info 1 'udev: Target is a 2.4 kernel, support disabled.'
-	[ "${VER}" -gt '2' ] || [ "${VER}" -eq '2' -a "${PAT}" -ge '6' ] && UDEV=1 && print_info 1 'udev: Target is a 2.6 kernel, support enabled.'
+	#UDEV=0
+	#[ "${VER}" -gt '2' ] || [ "${VER}" -eq '2' -a "${PAT}" -ge '6' -a "${NOUDEV}" -eq '0' ] && UDEV=1 && print_info 1 'udev: Target is a 2.6 kernel, support enabled.'
 	[ "${UDEV}" -eq '1' ] && compile_udev
 
 	# Create initrd
diff --git a/genkernel.conf b/genkernel.conf
index 25dc037..e925fd2 100755
--- a/genkernel.conf
+++ b/genkernel.conf
@@ -78,7 +78,7 @@ MODUTILS_SRCTAR="${GK_SHARE}/pkg/modutils-${MODUTILS_VER}.tar.bz2"
 MODUTILS_DIR="modutils-${MODUTILS_VER}"
 MODUTILS_BINCACHE="%%CACHE%%/insmod-%%ARCH%%-static-2.4.bz2"
 
-DIETLIBC_VER="0.26"
+DIETLIBC_VER="0.27"
 DIETLIBC_SRCTAR="${GK_SHARE}/pkg/dietlibc-${DIETLIBC_VER}.tar.bz2"
 DIETLIBC_DIR="dietlibc-${DIETLIBC_VER}"
 DIETLIBC_BINCACHE="%%CACHE%%/dietlibc-${DIETLIBC_VER}-%%ARCH%%.tar.bz2"
@@ -90,7 +90,7 @@ DEVFSD_DIR="devfsd"
 DEVFSD_BINCACHE="%%CACHE%%/devfsd-${DEVFSD_VER}-%%ARCH%%.bz2"
 DEVFSD_CONF_BINCACHE="%%CACHE%%/devfsd-conf-${DIETLIBC_VER}-%%ARCH%%.bz2"
 
-UDEV_VER="030"
+UDEV_VER="039"
 UDEV_DIR="udev-${UDEV_VER}"
 UDEV_SRCTAR="${GK_SHARE}/pkg/udev-${UDEV_VER}.tar.bz2"
 UDEV_BINCACHE="%%CACHE%%/udev-${UDEV_VER}-%%ARCH%%.tar.bz2"
diff --git a/pkg/busybox-1.00-pre2-decl.patch b/pkg/busybox-1.00-pre2-decl.patch
deleted file mode 100644
index 7f62ee5..0000000
--- a/pkg/busybox-1.00-pre2-decl.patch
+++ /dev/null
@@ -1,60 +0,0 @@
---- busybox-1.00-pre2/shell/ash.c.orig	2003-08-24 16:31:08.000000000 -0700
-+++ busybox-1.00-pre2/shell/ash.c	2003-08-24 16:32:41.000000000 -0700
-@@ -543,6 +543,28 @@
- static int parsenleft;                  /* copy of parsefile->nleft */
- static int parselleft;                  /* copy of parsefile->lleft */
- 
-+struct strpush {
-+	struct strpush *prev;   /* preceding string on stack */
-+	char *prevstring;
-+	int prevnleft;
-+#ifdef CONFIG_ASH_ALIAS
-+	struct alias *ap;       /* if push was associated with an alias */
-+#endif
-+	char *string;           /* remember the string since it may change */
-+};
-+
-+struct parsefile {
-+	struct parsefile *prev; /* preceding file on stack */
-+	int linno;              /* current line */
-+	int fd;                 /* file descriptor (or -1 if string) */
-+	int nleft;              /* number of chars left in this line */
-+	int lleft;              /* number of chars left in this buffer */
-+	char *nextc;            /* next char in buffer */
-+	char *buf;              /* input buffer */
-+	struct strpush *strpush; /* for pushing strings at this level */
-+	struct strpush basestrpush; /* so pushing one is fast */
-+};
-+
- /* next character in input buffer */
- static char *parsenextc;               /* copy of parsefile->nextc */
- static struct parsefile basepf;         /* top level input file */
-@@ -1577,28 +1599,6 @@
- 
- static int loopnest;            /* current loop nesting level */
- 
--struct strpush {
--	struct strpush *prev;   /* preceding string on stack */
--	char *prevstring;
--	int prevnleft;
--#ifdef CONFIG_ASH_ALIAS
--	struct alias *ap;       /* if push was associated with an alias */
--#endif
--	char *string;           /* remember the string since it may change */
--};
--
--struct parsefile {
--	struct parsefile *prev; /* preceding file on stack */
--	int linno;              /* current line */
--	int fd;                 /* file descriptor (or -1 if string) */
--	int nleft;              /* number of chars left in this line */
--	int lleft;              /* number of chars left in this buffer */
--	char *nextc;            /* next char in buffer */
--	char *buf;              /* input buffer */
--	struct strpush *strpush; /* for pushing strings at this level */
--	struct strpush basestrpush; /* so pushing one is fast */
--};
--
- /*
-  * The parsefile structure pointed to by the global variable parsefile
-  * contains information about the current file being read.
diff --git a/pkg/busybox-1.00-pre7-losetup-crypto-alpha.tar.bz2 b/pkg/busybox-1.00-pre7-losetup-crypto-alpha.tar.bz2
index b64ac90..c5ab4b8 100644
Binary files a/pkg/busybox-1.00-pre7-losetup-crypto-alpha.tar.bz2 and b/pkg/busybox-1.00-pre7-losetup-crypto-alpha.tar.bz2 differ
diff --git a/pkg/devfsd-1.3.25-dietlibc-kernel25.tar.bz2 b/pkg/devfsd-1.3.25-dietlibc-kernel25.tar.bz2
index 57dac57..dd04a78 100644
Binary files a/pkg/devfsd-1.3.25-dietlibc-kernel25.tar.bz2 and b/pkg/devfsd-1.3.25-dietlibc-kernel25.tar.bz2 differ
diff --git a/pkg/dietlibc-0.26.tar.bz2 b/pkg/dietlibc-0.26.tar.bz2
deleted file mode 100644
index 204edc0..0000000
Binary files a/pkg/dietlibc-0.26.tar.bz2 and /dev/null differ
diff --git a/pkg/dietlibc-0.27.tar.bz2 b/pkg/dietlibc-0.27.tar.bz2
new file mode 100644
index 0000000..fa4cbe0
Binary files /dev/null and b/pkg/dietlibc-0.27.tar.bz2 differ
diff --git a/pkg/udev-030.tar.bz2 b/pkg/udev-030.tar.bz2
deleted file mode 100644
index 7ef7b48..0000000
Binary files a/pkg/udev-030.tar.bz2 and /dev/null differ
diff --git a/pkg/udev-039.tar.bz2 b/pkg/udev-039.tar.bz2
new file mode 100644
index 0000000..265af48
Binary files /dev/null and b/pkg/udev-039.tar.bz2 differ
diff --git a/x86/modules_load b/x86/modules_load
index 848cdd4..3119100 100644
--- a/x86/modules_load
+++ b/x86/modules_load
@@ -10,5 +10,5 @@ sim710 sym53c416"
 
 MODULES_FIREWIRE="ieee1394 ohci1394 sbp2"
 MODULES_ATARAID="ataraid pdcraid hptraid"
-MODULES_PCMCIA="pcmcia_core i82365 yenta_socket ds ide-cs"
-MODULES_USB="ehci-hcd uhci usb-ohci hid usb-storage"
+MODULES_PCMCIA="pcmcia_core yenta_socket i82365 ds ide-cs"
+MODULES_USB="ehci-hcd uhci usb-ohci hid usb-storage uchi-hcd ohci-hcd usbhid"