From: Kevin Koch <kpkoch@mit.edu>
Date: Mon, 5 Mar 2007 22:34:25 +0000 (+0000)
Subject: Train build script to use repository sources, omit sample configuration.  [wix area.]
X-Git-Tag: krb5-1.7-alpha1~1267
X-Git-Url: http://git.tremily.us/?a=commitdiff_plain;h=2267663d932a47cabf1614d4a8d5838797b53335;p=krb5.git

Train build script to use repository sources, omit sample configuration.  [wix area.]

Add control of the repository access step, fetch all sources from the repository.  Track in documentation.

Eliminate unhelpful output during pre-package step.

The next step is to fetch only krb5/src/windows/build and run the entire build.

git-svn-id: svn://anonsvn.mit.edu/krb5/trunk@19207 dc483132-0cff-0310-8789-dd5450dbe970
---

diff --git a/src/windows/build/BKWconfig.xml b/src/windows/build/BKWconfig.xml
index 17b88af85..61e5ee59d 100644
--- a/src/windows/build/BKWconfig.xml
+++ b/src/windows/build/BKWconfig.xml
@@ -5,8 +5,8 @@
 	  <!-- The most changeable parameters can be specified on the command line.
 	       Less changeable params are in section Config, below. -->
 		<Tags>
-			<cvs value="2.6.5 build 1234"/>
-<!--			<svn value="http://anonsvn.mit.edu/foo/bar"/>	-->
+			<cvs value=""/>
+<!--			<svn value=""/>	-->
 		</Tags>
 		<Directories>
 			<!--	Sources will be checked out of repositories into <src>.  The structure
@@ -20,7 +20,8 @@
 		</Directories>
 		<Options>
 			<debug			value="0" />
-			<log				value="1" path="bkw_pl.log" />
+			<logfile			value="1" path="bkw.pl.log" />
+			<repository	value="skip" />
 			<clean			value="0" />
 			<nomake		value="0" />
 			<nopackage	value="0" />
@@ -30,7 +31,7 @@
 	</CommandLine>
 	<Config>
 		<CVSROOT	name=":kserver:cvs.mit.edu:/cvs/pismere" />
-		<SVNURL		name="" />
+		<SVNURL		name="svn+ssh://svn.mit.edu/" />
 	</Config>
 	<Stages>
 		<FetchSources></FetchSources>
diff --git a/src/windows/build/bkw-automation.html b/src/windows/build/bkw-automation.html
index 6bad28bb4..d7ca7a0c3 100644
--- a/src/windows/build/bkw-automation.html
+++ b/src/windows/build/bkw-automation.html
@@ -112,7 +112,42 @@
 														<TT>/vverbose&nbsp;&nbsp;&nbsp;&nbsp; very verbose output</TT><BR>
 														<TT>/config path&nbsp; Path to config file</TT><BR>
 														<TT>/logfile path Where to write output. If omitted, ...</TT><BR>
-														<TT>Other:</TT><BR>
+														<TT>/srcdir dir&nbsp;&nbsp; Source directory to use. Should contain
+															<BR>
+															&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</TT><TT>pismere/athena. 
+															If cvstag or svntag is null,
+															<BR>
+															&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 
+															the directory should be prepopulated.
+															<BR>
+														</TT><TT>/outdir dir&nbsp;&nbsp; Directory to be created where build results will 
+															go
+															<BR>
+															/repository checkout | co \ What repository action to take.
+															<BR>
+															&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </TT><TT>update&nbsp;&nbsp; 
+															| up | Options are to checkout, update or<BR>
+															&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;skip&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 
+															/ take no action [skip].
+															<BR>
+															/cvstag tag&nbsp;&nbsp; \ For whichever of these tags is specified,
+															<BR>
+														</TT><TT>/svntag url&nbsp;&nbsp; / the repository action will be done into srcdir
+															<BR>
+															/debug Do debug make instead of release make
+															<BR>
+															/nomake Skip make step
+															<BR>
+															/nopackage Skip packaging step
+															<BR>
+															/clean Build clean target
+															<BR>
+															/verbose Debug mode - verbose output
+															<BR>
+															/config path Path to config file
+															<BR>
+															/logfile path Where to write output. If omitted, ...<BR>
+														</TT><TT>Other:</TT><BR>
 														<TT>NMAKE-options any options you want to pass to NMAKE, which can be:</TT><BR>
 														<TT>(note: /nologo is always used)</TT><BR>
 														<TT>[ nmake options follow ]</TT></P>
diff --git a/src/windows/build/bkw.pl b/src/windows/build/bkw.pl
index 60ada43c3..900d4ca44 100644
--- a/src/windows/build/bkw.pl
+++ b/src/windows/build/bkw.pl
@@ -5,18 +5,16 @@ use FindBin;
 use File::Spec;
 use File::Basename;
 use lib "$FindBin::Bin/build/lib";
-#use Logger;
+use ActivePerl::PPM::Logger;
 use Getopt::Long;
 use Cwd;
 use XML::Simple;
 use Data::Dumper;
-use Archive::Zip qw( :ERROR_CODES :CONSTANTS );
-   
-# my $zip = Zip->new();
 
 my $BAIL;
 $0 = fileparse($0);
-my $OPT = { logfile => 'bkw.pl.log' };
+my $OPT = {foo => 'bar'};
+
 my $MAKE = 'NMAKE';
 
 sub get_info
@@ -41,10 +39,13 @@ Usage: $0 (-f --config) config-file [options] NMAKE-options
     /srcdir dir   Source directory to use.  Should contain 
                   pismere/athena.  If cvstag or svntag is null, 
                   the directory should be prepopulated.
-    /cvstag tag   \\ For whichever of these tags is specified,
-    /svntag url   / a checkout  will be done into srcdir
-    /debug        Do debug make instead of release make
     /outdir dir   Directory to be created where build results will go
+    /repository checkout | co \\  What repository action to take.
+	        update   | up  ) Options are to checkout, update or 
+	        skip          /  take no action [skip].
+    /cvstag tag \\ For whichever of these tags is specified,
+    /svntag tag / the repository action will be done into srcdir
+    /debug        Do debug make instead of release make
     /nomake       Skip make step
     /nopackage    Skip packaging step
     /clean        Build clean target
@@ -95,6 +96,7 @@ sub main {
 	       'debug|d',
 	       'config|f:s',
 	       'logfile|l:s',
+	       'repository:s',
 	       'clean',
 	       'verbose',
 	       'vverbose',
@@ -167,17 +169,19 @@ sub main {
 	@prepackage	= $config->{Stages}->{PrePackage};
 	@files				= $config->{Stages}->{PrePackage}->{CopyList}->{Files};
 
-    # Update the config with overrides from the command line:
-	$tags[0]->{cvs}->{value} = $OPT->{cvstag}					if exists $OPT->{cvstag};
-	$tags[0]->{svn}->{value} = $OPT->{svnurl}					if exists $OPT->{svnurl};
-	$paths[0]->{src}->{path} = $OPT->{srcdir}					if exists $OPT->{srcdir};
-    $paths[0]->{out}->{path} = $OPT->{outdir}				if exists $OPT->{outdir};
-    $switches[0]->{debug}->{value} = $OPT->{debug}	if exists $OPT->{debug};
-    $switches[0]->{clean}->{value} = 1								if exists $OPT->{clean};
-    $switches[0]->{nomake}->{value} = 1							if exists $OPT->{nomake};
-    $switches[0]->{nopackage}->{value} = 1						if exists $OPT->{nopackage};
-    $switches[0]->{verbose}->{value} = $OPT->{verbose}		if exists $OPT->{verbose};
-    $switches[0]->{vverbose}->{value} = $OPT->{verbose}	if exists $OPT->{vverbose};
+    # Update the configuration with overrides from the command line:
+	$tags[0]->{cvs}->{value} = $OPT->{cvstag}								if exists $OPT->{cvstag};
+	$tags[0]->{svn}->{value} = $OPT->{svnurl}								if exists $OPT->{svnurl};
+	$paths[0]->{src}->{path} = $OPT->{srcdir}								if exists $OPT->{srcdir};
+    $paths[0]->{out}->{path} = $OPT->{outdir}							if exists $OPT->{outdir};
+    $switches[0]->{debug}->{value} = $OPT->{debug}				if exists $OPT->{debug};
+    $switches[0]->{clean}->{value} = 1											if exists $OPT->{clean};
+    $switches[0]->{logfile}->{value} = 1											if exists $OPT->{logfile};
+    $switches[0]->{repository}->{value} = $OPT->{repository}	if exists $OPT->{repository};
+    $switches[0]->{nomake}->{value} = 1										if exists $OPT->{nomake};
+    $switches[0]->{nopackage}->{value} = 1									if exists $OPT->{nopackage};
+    $switches[0]->{verbose}->{value} = $OPT->{verbose}			if exists $OPT->{verbose};
+    $switches[0]->{vverbose}->{value} = $OPT->{verbose}		if exists $OPT->{vverbose};
 	if (exists $OPT->{logfile}) {
 		$switches[0]->{log}->{path} = $OPT->{logfile};
 		$switches[0]->{log}->{value} = 1;
@@ -213,41 +217,66 @@ sub main {
 ##-- Assemble configuration from config file and command line.
 
 # Begin logging:
-#    my $l;
-#    if ($OPT->{logfile}) {
+    my $l;
+    if ($OPT->{logfile}) {
 #		$l = new Logger $OPT->{logfile} or die "Fatal -- Can't create Logger.";
 #		$l->start;
-#		}
-
-if (!$switches[0]->{nomake}->{value}) {
-	if ($verbose) {print "Info -- *** Begin fetching sources.\n";}
-	
-	my ($wd, $result);
-	$wd = $paths[0]->{src}->{path};
-	chdir($wd) or die "Fatal -- couldn't chdir to $wd\n";
-	if ($verbose) {print "Info -- chdir to $wd\n";}
-	
-	#if (! -d "pismere")					{print "Warning -- can't find pismere in $wd.  It will be created.\n";}
-	#if (! -d "pismere\\athena")	{print "Warning -- can't find pismere\\athena in $wd.  It will be created.\n";}
-	
-	if ($tags[0]->{cvs}->{value})		{
-		# Set up cvs environment variables:
-		print "Warning -- cvs checkout skipped for now.\n";
-	#	system("cvs checkout krb") or die "Fatal -- checkout of cvs source failed; return code $?\n";
 		}
-	else	{print "Info -- cvs tag not specified; no cvs sources will be checked out.\n";}
+
+##++ Begin repository action:
+	my $sw = $switches[0]->{repository}->{value};
+	my $rverb;
+	if ($sw =~ /skip/i)				{print "Info -- Skipping repository access.\n";}
+	elsif ($sw =~ /update/i)		{$rverb = "update";}
+	elsif ($sw =~ /up/i)				{$rverb = "update";}
+	elsif ($sw =~ /checkout/i)	{$rverb = "checkout";}
+	elsif ($sw =~ /co/i)				{$rverb = "checkout";}
+	else {
+			print "Fatal -- invalid /repository value.\n";
+			usage();
+			die;
+			}
+
+	my $wd 	= $paths[0]->{src}->{path}."\\pismere";
 	
-	if ($tags[0]->{svn}->{value})	{
-		# Set up svn environment variables:
-		print "Warning -- svn checkout skipped for now.\n";
-	#	system("svn checkout krb") or die "Fatal -- checkout of svn source failed; return code $?\n";
+	if ($rverb) {
+		if ($verbose) {print "Info -- *** Begin fetching sources.\n";}
+
+		my $krb5dir	= $wd."\\athena\\auth\\krb5";
+
+		# If we are fetching into a new directory, the directory structure won't exist and many cd commands will fail.
+		# Use an xcopy to create the directory paths we will need:
+		!system("echo tempfile > kpk.tmp") or die "Fatal -- Couldn't creqte a simple temp file.\n";
+		!system("echo F | xcopy /y kpk.tmp $krb5dir") or die "Fatal -- Couldn't create path $krb5dir\n";
+		!system("del kpk.tmp") or die "Fatal -- Couldn't clean up temporary file.\n";
+		
+		chdir("$wd") or die "Fatal -- couldn't chdir to $wd\n";
+		if ($verbose) {print "Info -- chdir to $wd\n";}
+		
+		#if (! -d "pismere")					{print "Warning -- can't find pismere in $wd.  It will be created.\n";}
+		if (! -d "athena")	{print "Warning -- can't find pismere\\athena in $wd.  It will be created.\n";}
+		
+		# [TODO] Set up cvs environment variables:
+		my $cvscmd = "cvs $rverb ";
+		if ($tags[0]->{cvs}->{value}) {$cvscmd .= $tags[0]->{cvs}->{value};}
+		!system($cvscmd) or die "Fatal -- command \"$cvscmd\" failed; return code $?\n";
+		
+		# [TODO] Set up svn environment variables:
+		chdir("$krb5dir") or die "Fatal -- couldn't chdir to $krb5dir\n";
+		if ($verbose) {print "Info -- chdir to $krb5dir\n";}
+		my $svncmd = "svn $rverb ";
+		if ($tags[0]->{svn}->{value}) {$svncmd .= $tags[0]->{svn}->{value};}
+		!system($svncmd) or die "Fatal -- command \"$svncmd\" failed; return code $?\n";
+		
+		if ($verbose) {print "Info -- ***   End fetching sources.\n";}
 		}
-	else	{print "Info -- svn tag not specified; no svn sources will be checked out.\n";}
-	
-	if ($verbose) {print "Info -- ***   End fetching sources.\n";}
+##-- End  repository action.
 	
 	if ($verbose) {print "Info -- *** Begin preparing for build.\n";}
-	
+	$wd = $paths[0]->{src}->{path};
+	chdir("$wd") or die "Fatal -- couldn't chdir to $wd\n";
+	if ($verbose) {print "Info -- chdir to $wd\n";}
+
 	my ($path, $destpath);
 	
 	# Copy athena\scripts\site\graft\krb5\Makefile.src to athena\auth\krb5:
@@ -267,135 +296,145 @@ if (!$switches[0]->{nomake}->{value}) {
 	
 	if ($verbose) {print "Info -- ***   End preparing for build.\n";}
 	
-	my ($buildtarget, $buildtext);
-	if ($switches[0]->{clean}->{value}) {
-		$buildtarget = "clean" ;
-		$buildtext = " clean."
-		}
-	else {
-		$buildtarget = "" ;
-		$buildtext = "."
-		}
-	if ($verbose) {print "Info -- *** Begin build".$buildtext."\n";}
-	
-	chdir("pismere/athena") or die "Fatal -- couldn't chdir to source directory $wd\\pismere\\athena\n";
-	if ($verbose) {print "Info -- chdir to $wd\\pismere\\athena\n";}
-		!system("perl ../scripts/build.pl --softdirs $buildtarget")	or die "Fatal -- build $buildtarget failed.";
+	if (!$switches[0]->{nomake}->{value}) {
+		my ($buildtarget, $buildtext);
+		if ($switches[0]->{clean}->{value}) {
+			$buildtarget = "clean" ;
+			$buildtext = " clean."
+			}
+		else {
+			$buildtarget = "" ;
+			$buildtext = "."
+			}
+		if ($verbose) {print "Info -- *** Begin build".$buildtext."\n";}
 		
-	chdir("..") or die "Fatal -- couldn't chdir to $wd\\pismere.";
-	if ($switches[0]->{clean}->{value}) {
-		if (-d "staging") {
-			!system("rm -rf staging") or die "Fatal -- Couldn't remove pismere/staging.";
+		chdir("pismere/athena") or die "Fatal -- couldn't chdir to source directory $wd\\pismere\\athena\n";
+		if ($verbose) {print "Info -- chdir to $wd\\pismere\\athena\n";}
+			!system("perl ../scripts/build.pl --softdirs $buildtarget")	or die "Fatal -- build $buildtarget failed.";
+			
+		chdir("..") or die "Fatal -- couldn't chdir to $wd\\pismere.";
+		if ($switches[0]->{clean}->{value}) {
+			if (-d "staging") {
+				!system("rm -rf staging") or die "Fatal -- Couldn't remove pismere/staging.";
+				}
 			}
-		}
-
-	if ($verbose) {print "Info -- ***   End build".$buildtext."\n";}
-	}				## End make conditional.
 	
-if (!$switches[0]->{nopackage}->{value}) {
-	if ($verbose) {print "Info -- *** Begin prepackage.\n";}
+		if ($verbose) {print "Info -- ***   End build".$buildtext."\n";}
+		}				## End make conditional.
 	
-	# The build results are copied to a staging area, where the packager expects to find them.
-	#  We put the staging area in the fixed area .../pismere/staging.
-	$wd = $paths[0]->{src}->{path}."\\pismere";
-	my $staging_area = "$wd\\staging";
-	chdir($wd) or die "Fatal -- couldn't chdir to $wd\n";
-	if ($verbose) {print "Info -- chdir to $wd\n";}
-	(-e $staging_area) or makeDir($staging_area);
+	if (!$switches[0]->{nopackage}->{value}) {
+		if ($verbose) {print "Info -- *** Begin prepackage.\n";}
+		
+		# The build results are copied to a staging area, where the packager expects to find them.
+		#  We put the staging area in the fixed area .../pismere/staging.
+		$wd = $paths[0]->{src}->{path}."\\pismere";
+		my $staging_area = "$wd\\staging";
+		chdir($wd) or die "Fatal -- couldn't chdir to $wd\n";
+		if ($verbose) {print "Info -- chdir to $wd\n";}
+		(-e $staging_area) or makeDir($staging_area);
+		
+		my $src = $paths[0]->{src}->{path};
+		my $CopyList			= $prepackage[0]->{CopyList};
+		
+		# A path can contain a variable part, which will be handled here.  If the variable part is 
+		# the Always or BuildDependent tag, then the variable will be changed to the 
+		# build-type-dependent PathFragment.
+		# If the variable part is the IgnoreTag, then the file will not be copied.
+		my ($PathFragment, $BuildDependentTag, $IgnoreTag); 
 	
-	my $src = $paths[0]->{src}->{path};
-	my $CopyList			= $prepackage[0]->{CopyList};
+		my $AlwaysTag				= $CopyList->{Config}->{AlwaysTag}->{value};
+		if ($switches[0]->{debug}->{value}) {		## Debug build tags:
+			$PathFragment				= $CopyList->{Config}->{DebugArea}->{value};
+			$BuildDependentTag	= $CopyList->{Config}->{DebugTag}->{value};
+			$IgnoreTag					= $CopyList->{Config}->{ReleaseTag}->{value};
+			}
+		else {																## Release build tags:
+			$PathFragment				= $CopyList->{Config}->{ReleaseArea}->{value};
+			$BuildDependentTag	= $CopyList->{Config}->{ReleaseTag}->{value};
+			$IgnoreTag					= $CopyList->{Config}->{DebugTag}->{value};
+			}			
 	
-	# A path can contain a variable part, which will be handled here.  If the variable part is 
-	# the Always or BuildDependent tag, then the variable will be changed to the 
-	# build-type-dependent PathFragment.
-	# If the variable part is the IgnoreTag, then the file will not be copied.
-	my ($PathFragment, $BuildDependentTag, $IgnoreTag); 
-
-	my $AlwaysTag				= $CopyList->{Config}->{AlwaysTag}->{value};
-	if ($switches[0]->{debug}->{value}) {		## Debug build tags:
-		$PathFragment				= $CopyList->{Config}->{DebugArea}->{value};
-		$BuildDependentTag	= $CopyList->{Config}->{DebugTag}->{value};
-		$IgnoreTag					= $CopyList->{Config}->{ReleaseTag}->{value};
-		}
-	else {																## Release build tags:
-		$PathFragment				= $CopyList->{Config}->{ReleaseArea}->{value};
-		$BuildDependentTag	= $CopyList->{Config}->{ReleaseTag}->{value};
-		$IgnoreTag					= $CopyList->{Config}->{DebugTag}->{value};
-		}			
-
-	# Copy all the files in the CopyList:
-	$i = 0;
-	my $nfiles = 0;
-	while ($files[0]->{File}[$i]) {
-		my ($name, $newname, $from, $to, $ignore);
-		$name		= $files[0]->{File}->[$i]->{name};
-		if (exists $files[0]->{File}->[$i]->{newname})	{$newname = $files[0]->{File}->[$i]->{newname};}
-		else																				{$newname = $name;}
-		if ($name) {
-			$ignore = 0;
-			$from	= "$src\\pismere\\athena\\$files[0]->{File}->[$i]->{from}\\$name";
-			$to		= "$src\\pismere\\staging\\$files[0]->{File}->[$i]->{to}\\$newname";
-			if (index($from.$to, $IgnoreTag) <0) {					## Test for IgnoreTag
-				# Apply PathTag substitutions:
-				$from	=~ s/$AlwaysTag/$PathFragment/g;
-				$to		=~ s/$AlwaysTag/$PathFragment/g;
-				$from	=~ s/$BuildDependentTag/$PathFragment/g;
-				$to		=~ s/$BuildDependentTag/$PathFragment/g;
-				# We use xcopy instead of copy because it will create directories for us:
-				if (system("echo F | xcopy /D /F /Y $from $to 2>NUL") != 0) {
-					# xcopy failed.  
-					if (!exists $files[0]->{File}->[$i]->{notrequired}) {
-						( -e $from) or die "Fatal -- can't find $from";
-						die "Fatal -- Copy of $from to $to failed";
+		# Copy all the files in the CopyList:
+		$i = 0;
+		my $nfiles			= 0;
+		my $bOldDot	= 1;
+		my $bDot			= 0;
+		while ($files[0]->{File}[$i]) {
+			my ($name, $newname, $from, $to, $ignore);
+			$name		= $files[0]->{File}->[$i]->{name};
+			if (exists $files[0]->{File}->[$i]->{newname})	{$newname = $files[0]->{File}->[$i]->{newname};}
+			else																				{$newname = $name;}
+			if ($name) {
+				$ignore = 0;
+				$from	= "$src\\pismere\\athena\\$files[0]->{File}->[$i]->{from}\\$name";
+				$to		= "$src\\pismere\\staging\\$files[0]->{File}->[$i]->{to}\\$newname";
+				if (index($from.$to, $IgnoreTag) <0) {					## Test for IgnoreTag
+					# Apply PathTag substitutions:
+					$from	=~ s/$AlwaysTag/$PathFragment/g;
+					$to		=~ s/$AlwaysTag/$PathFragment/g;
+					$from	=~ s/$BuildDependentTag/$PathFragment/g;
+					$to		=~ s/$BuildDependentTag/$PathFragment/g;
+					# We use xcopy instead of copy because it will create directories for us:
+					if (system("echo F | xcopy /D /F /Y $from $to > a.tmp 2>NUL") != 0) {
+						# xcopy failed.  
+						if (!exists $files[0]->{File}->[$i]->{notrequired}) {
+							( -e $from) or die "Fatal -- can't find $from";
+							die "Fatal -- Copy of $from to $to failed";
+							}
+						}
+					else {		## To show progress when files aren't copied, print a string of dots.
+						open(MYINPUTFILE, "<a.tmp");
+						my(@lines) = <MYINPUTFILE>;
+						foreach $line (@lines) { 
+							$bDot = ($line =~ /^0/);
+							}
+						close(MYINPUTFILE);
+						if (!$bDot && $bOldDot) {print "\n";}
+						if ($bDot) {print ".";}
+						else {print "$from copied to $to\n";}
+						$bOldDot = $bDot;
 						}
 					}
-				else {$nfiles++;}
 				}
+			$i++;
 			}
-		$i++;
-		}
+		if ($bDot) {print "\n";}
+			
+#		# Copy the extras:
+#		print "Info -- Absent a way of scripting unzip, the instructions require manually unzipping into\n";
+#		print "        the target area $src\\pismere\\staging.\n";
+#		# my $extradir = $paths[0]->{extras}->{path};
+#		# !system("xcopy /d/f/y/s $src\\pismere\\athena\\$extradir\\* $src\\pismere\\staging") or die "Fatal -- Couldn't copy extras from $src\\pismere\\athena\\$extradir";
+		
+		chdir("staging\\install\\wix") or die "Fatal -- Couldn't cd to $wd\\staging\\install\\wix";
 		
-	# Copy the extras:
-	print "Info -- Absent a way of scripting unzip, the instructions require manually unzipping into\n";
-	print "        the target area $src\\pismere\\staging.\n";
-	# my $extradir = $paths[0]->{extras}->{path};
-	# !system("xcopy /d/f/y/s $src\\pismere\\athena\\$extradir\\* $src\\pismere\\staging") or die "Fatal -- Couldn't copy extras from $src\\pismere\\athena\\$extradir";
+		# Correct errors in files.wxi:
+		!system("sed 's/WorkingDirectory=\"\\[dirbin\\]\"/WorkingDirectory=\"dirbin\"/g' files.wxi > a.tmp") or die "Fatal -- Couldn't modify files.wxi.";
+		!system("copy /y a.tmp files.wxi") or die "Fatal -- Couldn't update files.wxi.";
+		!system("del a.tmp") or print "Warning -- Couldn't clean up temporary file $wd\\staging\\installer\\wix\\a.tmp.\n";
+			
+		# Update paths in site-local.wxi:
+		my $dblback_originalDir = $originalDir;
+		$dblback_originalDir =~ s/\\/\\\\/g;
+		!system("sed -f $dblback_originalDir\\site-local.sed site-local.wxi > b.tmp") or die "Fatal -- Couldn't modify site-local.wxi.";
+		my $hexback_wd = $wd;
+		$hexback_wd =~ s/\\/\\\\\\\\\\\\/g;
+		!system("sed 's/%%TARGETDIR%%/$hexback_wd\\\\\\staging\\\\\\/' b.tmp > c.tmp") or die "Fatal -- Couldn't modify site-local.wxi temporary file.";	
+		!system("sed 's/%%CONFIGDIR%%/$hexback_wd\\\\\\staging\\\\\\sample\\\\\\/' c.tmp > d.tmp") or die "Fatal -- Couldn't modify site-local.wxi temporary file.";	
+		!system("copy /y d.tmp site-local.wxi") or die "Fatal -- Couldn't replace site-local.wxi.";
 	
-	chdir("staging\\install\\wix") or die "Fatal -- Couldn't cd to $wd\\staging\\install\\wix";
+		# Copy krb.conf from ...\athena\auth\krb5\src\config-files	to pismere\staging\samples\krb5.ini:
+		!system("echo F | xcopy /D $wd\\athena\\auth\\krb5\\src\\config-files\\krb5.conf $wd\\staging\\sample\\krb5.ini") 
+			or die "Fatal -- Couldn't update $wd\\staging\\sample\\krb5.ini.";
 	
-	# Correct errors in files.wxi:
-	!system("sed 's/WorkingDirectory=\"\\[dirbin\\]\"/WorkingDirectory=\"dirbin\"/g' files.wxi > a.tmp") or die "Fatal -- Couldn't modify files.wxi.";
-	!system("copy /y a.tmp files.wxi") or die "Fatal -- Couldn't update files.wxi.";
-	!system("del a.tmp") or print "Warning -- Couldn't clean up temporary file $wd\\staging\\installer\\wix\\a.tmp.\n";
+		if ($verbose) {print "Info -- ***   End prepackage.\n";}
 		
-	# Update paths in site-local.wxi:
-	my $dblback_originalDir = $originalDir;
-	$dblback_originalDir =~ s/\\/\\\\/g;
-	!system("sed -f $dblback_originalDir\\site-local.sed site-local.wxi > b.tmp") or die "Fatal -- Couldn't modify site-local.wxi.";
-	my $hexback_wd = $wd;
-	$hexback_wd =~ s/\\/\\\\\\\\\\\\/g;
-	!system("sed 's/%%TARGETDIR%%/$hexback_wd\\\\\\staging\\\\\\/' b.tmp > c.tmp") or die "Fatal -- Couldn't modify site-local.wxi temporary file.";	
-	!system("sed 's/%%CONFIGDIR%%/$hexback_wd\\\\\\staging\\\\\\sample\\\\\\/' c.tmp > d.tmp") or die "Fatal -- Couldn't modify site-local.wxi temporary file.";	
-	!system("copy /y d.tmp site-local.wxi") or die "Fatal -- Couldn't replace site-local.wxi.";
-
-	# Copy krb.conf from ...\athena\auth\krb5\src\config-files	to pismere\staging\samples\krb5.ini:
-	!system("echo F | xcopy /D $wd\\athena\\auth\\krb5\\src\\config-files\\krb5.conf $wd\\staging\\sample\\krb5.ini") 
-		or die "Fatal -- Couldn't update $wd\\staging\\sample\\krb5.ini.";
-
-	# Sam said to leave these files out, but it is faster to copy them now 
-	#  than to figure out how to modify the wix configs to ignore them:
-	!system("echo F | xcopy /D $wd\\staging\\kfw-2.5-extra\\sample-config\\*.con $wd\\staging\\sample") 
-		or die "Fatal -- Couldn't copy $wd\\staging\\kfw-2.5-extra\\sample-config\\*.con.";
-
-	if ($verbose) {print "Info -- ***   End prepackage.\n";}
+		# Make the msi:
+		!system("nmake") or die "Fatal -- Couldn't make kfw.msi.";
 	
-	# Make the msi:
-	!system("nmake") or die "Fatal -- Couldn't make kfw.msi.";
-
-	if ($verbose) {print "Info -- *** Begin package.\n";}
-	if ($verbose) {print "Info -- ***   End package.\n";}
-	}						## End package conditional.
+		if ($verbose) {print "Info -- *** Begin package.\n";}
+		if ($verbose) {print "Info -- ***   End package.\n";}
+		}						## End package conditional.
 	
 #End logging:
 #    if (!$OPT->{nolog}) {
@@ -403,10 +442,9 @@ if (!$switches[0]->{nopackage}->{value}) {
 #		}
 
     return $errorState;
-}
+	}							## End subroutine main.
 
 $SIG{'INT'} = \&handler;
 $SIG{'QUIT'} = \&handler;
 
-##exit (0);
 exit(main());
\ No newline at end of file
diff --git a/src/windows/installer/wix/features.wxi b/src/windows/installer/wix/features.wxi
index 72480a94c..7dd2f0b9d 100644
--- a/src/windows/installer/wix/features.wxi
+++ b/src/windows/installer/wix/features.wxi
@@ -111,8 +111,8 @@
             
         <?ifdef OldHelp?>
             <ComponentRef Id="cmf_leash32_hlp" />
-        <?else?>
-            <ComponentRef Id="cmf_leash32_chm" />
+<!--        <?else?>
+            <ComponentRef Id="cmf_leash32_chm" />	-->
         <?endif?>
             <ComponentRef Id="cmf_leashw32_dll" />
             
@@ -213,9 +213,9 @@
                 <?endif?>
             <?endif?>
         <?endif?>
-            <ComponentRef Id="cmf_krb5_ini" />
+<!--            <ComponentRef Id="cmf_krb5_ini" />
             <ComponentRef Id="cmf_krb_con" />
-            <ComponentRef Id="cmf_krbrealm_con" />
+            <ComponentRef Id="cmf_krbrealm_con" />	-->
             
             <ComponentRef Id="rcm_common" />
             <ComponentRef Id="rcm_client" />
diff --git a/src/windows/installer/wix/files.wxi b/src/windows/installer/wix/files.wxi
index 5fc096631..ee46a0736 100644
--- a/src/windows/installer/wix/files.wxi
+++ b/src/windows/installer/wix/files.wxi
@@ -231,9 +231,9 @@
 	                    <File Id="fil_leash32_hlp" LongName="leash32.hlp" Name="leash32.hlp" KeyPath="yes" />
                     </Component>
                 <?else?>
-                    <Component Id="cmf_leash32_chm" Guid="C50E5E0A-B822-4419-855B-1713637BCA6A" DiskId="1">
+<!--                    <Component Id="cmf_leash32_chm" Guid="C50E5E0A-B822-4419-855B-1713637BCA6A" DiskId="1">
 	                    <File Id="fil_leash32_chm" LongName="leash32.chm" Name="leash32.chm" KeyPath="yes" />
-                    </Component>
+                    </Component>	-->
                 <?endif?>
                     <Component Id="cmf_leashw32_dll" Guid="8C145D48-A2FC-4C28-BC05-4368545F1184" DiskId="1">
 	                    <File Id="fil_leashw32_dll" LongName="leashw32.dll" Name="leashw32.dll" KeyPath="yes" />
@@ -888,7 +888,7 @@
         </Directory> <!-- /MIT -->
     </Directory> <!-- /Program Files -->
     <Directory Id="WindowsFolder">
-        <Component Id="cmf_krb5_ini" Guid="C1AF0670-BBF1-4AA6-B2A6-6C8B1584A1F4" NeverOverwrite="yes" Permanent="yes" DiskId="1">
+<!--        <Component Id="cmf_krb5_ini" Guid="C1AF0670-BBF1-4AA6-B2A6-6C8B1584A1F4" NeverOverwrite="yes" Permanent="yes" DiskId="1">
 	        <File Id="fil_krb5_ini" LongName="krb5.ini" Name="krb5.ini" src="$(var.ConfigDir)krb5.ini" KeyPath="yes" />
         </Component>
         <Component Id="cmf_krb_con" Guid="5E91A051-CF14-45FF-BF64-CEE78A7A90C2" NeverOverwrite="yes" Permanent="yes" DiskId="1">
@@ -896,7 +896,7 @@
         </Component>
         <Component Id="cmf_krbrealm_con" Guid="D667B54F-1C98-43FB-87C6-0F0517623B90" NeverOverwrite="yes" Permanent="yes" DiskId="1">
 	        <File Id="fil_krbrealm_con" LongName="krbrealm.con" Name="krbrealm.con" src="$(var.ConfigDir)krbrealm.con" KeyPath="yes" />
-        </Component>
+        </Component>	-->
     </Directory>
     
     <Directory Id="ProgramMenuFolder">