From: Fredrik Gustafsson Date: Mon, 13 Jun 2011 17:15:26 +0000 (+0200) Subject: submodule update: continue when a checkout fails X-Git-Tag: v1.7.7-rc0~107^2~1 X-Git-Url: http://git.tremily.us/?a=commitdiff_plain;h=15ffb7cde48b73b3d5ce259443db7d2e0ba13750;p=git.git submodule update: continue when a checkout fails "git submodule update" stops at the first error and gives control back to the user. Only after the user fixes the problematic submodule and runs "git submodule update" again, the second error is found. And the user needs to repeat until all the problems are found and fixed one by one. This is tedious. Instead, the command can remember which submodules it had trouble with, continue updating the ones it can, and report which ones had errors at the end. The user can run "git submodule update", find all the ones that need minor fixing (e.g. working tree was dirty) to fix them in a single pass. Then another "git submodule update" can be run to update all. Note that the problematic submodules are skipped only when they are to be integrated with a safer value of submodule..update option, namely "checkout". Fixing a failure in a submodule that uses "rebase" or "merge" may need an involved conflict resolution by the user, and leaving too many submodules in states that need resolution would not reduce the mental burden on the user. Signed-off-by: Fredrik Gustafsson Mentored-by: Jens Lehmann Mentored-by: Heiko Voigt Signed-off-by: Junio C Hamano --- diff --git a/git-submodule.sh b/git-submodule.sh index d189a24c7..eb5eebcd9 100755 --- a/git-submodule.sh +++ b/git-submodule.sh @@ -444,7 +444,8 @@ cmd_update() fi cloned_modules= - module_list "$@" | + module_list "$@" | { + err= while read mode sha1 stage path do if test "$stage" = U @@ -525,17 +526,54 @@ cmd_update() ;; esac - (clear_local_git_env; cd "$path" && $command "$sha1") || - die "Unable to $action '$sha1' in submodule path '$path'" - say "Submodule path '$path': $msg '$sha1'" + if (clear_local_git_env; cd "$path" && $command "$sha1") + then + say "Submodule path '$path': $msg '$sha1'" + else + case $action in + rebase|merge) + die_with_status 2 "Unable to $action '$sha1' in submodule path '$path'" + ;; + *) + err="${err};Failed to $action in submodule path '$path'" + continue + ;; + esac + fi fi if test -n "$recursive" then - (clear_local_git_env; cd "$path" && eval cmd_update "$orig_flags") || - die "Failed to recurse into submodule path '$path'" + (clear_local_git_env; cd "$path" && eval cmd_update "$orig_flags") + res=$? + if test $res -gt 0 + then + if test $res -eq 1 + then + err="${err};Failed to recurse into submodule path '$path'" + continue + else + die_with_status $res "Failed to recurse into submodule path '$path'" + fi + fi fi done + + if test -n "$err" + then + OIFS=$IFS + IFS=';' + for e in $err + do + if test -n "$e" + then + echo >&2 "$e" + fi + done + IFS=$OIFS + exit 1 + fi + } } set_name_rev () { diff --git a/t/t7406-submodule-update.sh b/t/t7406-submodule-update.sh index 4f16fcce2..807f76114 100755 --- a/t/t7406-submodule-update.sh +++ b/t/t7406-submodule-update.sh @@ -298,4 +298,148 @@ test_expect_success 'submodule update ignores update=rebase config for new submo ) ' +test_expect_success 'submodule update continues after checkout error' ' + (cd super && + git reset --hard HEAD && + git submodule add ../submodule submodule2 && + git submodule init && + git commit -am "new_submodule" && + (cd submodule2 && + git rev-parse --max-count=1 HEAD > ../expect + ) && + (cd submodule && + test_commit "update_submodule" file + ) && + (cd submodule2 && + test_commit "update_submodule2" file + ) && + git add submodule && + git add submodule2 && + git commit -m "two_new_submodule_commits" && + (cd submodule && + echo "" > file + ) && + git checkout HEAD^ && + test_must_fail git submodule update && + (cd submodule2 && + git rev-parse --max-count=1 HEAD > ../actual + ) && + test_cmp expect actual + ) +' +test_expect_success 'submodule update continues after recursive checkout error' ' + (cd super && + git reset --hard HEAD && + git checkout master && + git submodule update && + (cd submodule && + git submodule add ../submodule subsubmodule && + git submodule init && + git commit -m "new_subsubmodule" + ) && + git add submodule && + git commit -m "update_submodule" && + (cd submodule && + (cd subsubmodule && + test_commit "update_subsubmodule" file + ) && + git add subsubmodule && + test_commit "update_submodule_again" file && + (cd subsubmodule && + test_commit "update_subsubmodule_again" file + ) && + test_commit "update_submodule_again_again" file + ) && + (cd submodule2 && + git rev-parse --max-count=1 HEAD > ../expect && + test_commit "update_submodule2_again" file + ) && + git add submodule && + git add submodule2 && + git commit -m "new_commits" && + git checkout HEAD^ && + (cd submodule && + git checkout HEAD^ && + (cd subsubmodule && + echo "" > file + ) + ) && + test_must_fail git submodule update --recursive && + (cd submodule2 && + git rev-parse --max-count=1 HEAD > ../actual + ) && + test_cmp expect actual + ) +' + +test_expect_success 'submodule update exit immediately in case of merge conflict' ' + (cd super && + git checkout master && + git reset --hard HEAD && + (cd submodule && + (cd subsubmodule && + git reset --hard HEAD + ) + ) && + git submodule update --recursive && + (cd submodule && + test_commit "update_submodule_2" file + ) && + (cd submodule2 && + test_commit "update_submodule2_2" file + ) && + git add submodule && + git add submodule2 && + git commit -m "two_new_submodule_commits" && + (cd submodule && + git checkout master && + test_commit "conflict" file && + echo "conflict" > file + ) && + git checkout HEAD^ && + (cd submodule2 && + git rev-parse --max-count=1 HEAD > ../expect + ) && + git config submodule.submodule.update merge && + test_must_fail git submodule update && + (cd submodule2 && + git rev-parse --max-count=1 HEAD > ../actual + ) && + test_cmp expect actual + ) +' +test_expect_success 'submodule update exit immediately after recursive rebase error' ' + (cd super && + git checkout master && + git reset --hard HEAD && + (cd submodule && + git reset --hard HEAD && + git submodule update --recursive + ) && + (cd submodule && + test_commit "update_submodule_3" file + ) && + (cd submodule2 && + test_commit "update_submodule2_3" file + ) && + git add submodule && + git add submodule2 && + git commit -m "two_new_submodule_commits" && + (cd submodule && + git checkout master && + test_commit "conflict2" file && + echo "conflict" > file + ) && + git checkout HEAD^ && + (cd submodule2 && + git rev-parse --max-count=1 HEAD > ../expect + ) && + git config submodule.submodule.update rebase && + test_must_fail git submodule update && + (cd submodule2 && + git rev-parse --max-count=1 HEAD > ../actual + ) && + test_cmp expect actual + ) +' test_done