From: Ian Abbott Date: Mon, 23 Apr 2012 17:12:41 +0000 (+0100) Subject: doc/drivers.txt: Rebuilt from comedi X-Git-Url: http://git.tremily.us/?a=commitdiff_plain;h=08448172d8b2877774cd28c1b6fa0f3d8e9ff8a5;p=comedilib.git doc/drivers.txt: Rebuilt from comedi Rebuilt "doc/drivers.txt" using "make Documentation/comedi/drivers.txt" in the Comedi package. Note: this scans the driver sources included with the comedi.org Comedi package, not the Linux "staging" Comedi sources, so some newer, staging-only drivers are missing. Signed-off-by: Ian Abbott --- diff --git a/doc/drivers.txt b/doc/drivers.txt index 7b7af44..5e45299 100644 --- a/doc/drivers.txt +++ b/doc/drivers.txt @@ -50,43 +50,69 @@ Configuration Options: none References: - - ni_660x.c + - ni_660x.c - adl_pci9111.c copied the entire pci setup section - - adl_pci9118.c + - adl_pci9118.c + + + +Driver: adl_pci7230 +Description: Driver for the Adlink PCI-7230 32 ch. isolated digital io board +Devices: [ADLink] PCI-7230 (adl_pci7230) +Author: David Fernandez +Status: experimental +Updated: Mon, 14 Apr 2008 15:08:14 +0100 + +Configuration Options: + [0] - PCI bus of device (optional) + [1] - PCI slot of device (optional) + If bus/slot is not specified, the first supported + PCI device found will be used. Driver: adl_pci7296 Description: Driver for the Adlink PCI-7296 96 ch. digital io board -Devices: [ADLink] PCI-7296 (pci7296) +Devices: [ADLink] PCI-7296 (adl_pci7296) Author: Jon Grierson -Updated: 2.8.2006 +Updated: Mon, 14 Apr 2008 15:05:56 +0100 Status: testing Configuration Options: - none + [0] - PCI bus of device (optional) + [1] - PCI slot of device (optional) + If bus/slot is not specified, the first supported + PCI device found will be used. Driver: adl_pci7432 Description: Driver for the Adlink PCI-7432 64 ch. isolated digital io board -Devices: [ADLink] PCI-7432 (pci7432) +Devices: [ADLink] PCI-7432 (adl_pci7432) Author: Michel Lachaine Status: experimental +Updated: Mon, 14 Apr 2008 15:08:14 +0100 Configuration Options: - none + [0] - PCI bus of device (optional) + [1] - PCI slot of device (optional) + If bus/slot is not specified, the first supported + PCI device found will be used. Driver: adl_pci8164 Description: Driver for the Adlink PCI-8164 4 Axes Motion Control board -Devices: [ADLink] PCI-8164 (pci8164) +Devices: [ADLink] PCI-8164 (adl_pci8164) Author: Michel Lachaine Status: experimental +Updated: Mon, 14 Apr 2008 15:10:32 +0100 Configuration Options: - none + [0] - PCI bus of device (optional) + [1] - PCI slot of device (optional) + If bus/slot is not specified, the first supported + PCI device found will be used. @@ -242,9 +268,9 @@ Driver: adv_pci1710 Description: Advantech PCI-1710, PCI-1710HG, PCI-1711, PCI-1713, Advantech PCI-1720, PCI-1731 Author: Michal Dobes -Devices: [Advantech] PCI-1710 (pci1710), PCI-1710HG (pci1710hg), - PCI-1711 (pci1711), PCI-1713 (pci1713), PCI-1720 (pci1720), - PCI-1731 (pci1731) +Devices: [Advantech] PCI-1710 (adv_pci1710), PCI-1710HG (pci1710hg), + PCI-1711 (adv_pci1710), PCI-1713, PCI-1720, + PCI-1731 Status: works This driver supports AI, AO, DI and DO subdevices. @@ -263,17 +289,47 @@ Configuration options: +Driver: adv_pci1723 +Description: Advantech PCI-1723 +Author: yonggang , Ian Abbott +Devices: [Advantech] PCI-1723 (adv_pci1723) +Updated: Mon, 14 Apr 2008 15:12:56 +0100 +Status: works + +Configuration Options: + [0] - PCI bus of device (optional) + [1] - PCI slot of device (optional) + + If bus/slot is not specified, the first supported + PCI device found will be used. + +Subdevice 0 is 8-channel AO, 16-bit, range +/- 10 V. + +Subdevice 1 is 16-channel DIO. The channels are configurable as input or +output in 2 groups (0 to 7, 8 to 15). Configuring any channel implicitly +configures all channels in the same group. + +TODO: + +1. Add the two milliamp ranges to the AO subdevice (0 to 20 mA, 4 to 20 mA). +2. Read the initial ranges and values of the AO subdevice at start-up instead + of reinitializing them. +3. Implement calibration. + + + Driver: adv_pci_dio -Description: Advantech PCI-1730, PCI-1733, PCI-1734, PCI-1750, PCI-1751, - PCI-1752, PCI-1753/E, PCI-1754, PCI-1756, PCI-1762 +Description: Advantech PCI-1730, PCI-1733, PCI-1734, PCI-1735U, + PCI-1736UP, PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, + PCI-1754, PCI-1756, PCI-1762 Author: Michal Dobes -Devices: [Advantech] PCI-1730 (pci1730), PCI-1733 (pci1733), - PCI-1734 (pci1734), PCI-1750 (pci1750), PCI-1751 (pci1751), - PCI-1752 (pci1752), PCI-1753 (pci1753), PCI-1753+PCI-1753E (pci1753e), - PCI-1754 (pci1754), PCI-1756 (pci1756), PCI-1760(pci1760), - PCI-1762 (pci1762) +Devices: [Advantech] PCI-1730 (adv_pci_dio), PCI-1733, + PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U, PCI-1750, + PCI-1751, PCI-1752, PCI-1753, + PCI-1753+PCI-1753E, PCI-1754, PCI-1756, + PCI-1760, PCI-1762 Status: untested -Updated: 2003-04-06 +Updated: Tue, 04 May 2010 13:00:00 +0000 This driver supports now only insn interface for DI/DO/DIO. @@ -320,8 +376,9 @@ Driver: amplc_dio200 Description: Amplicon 200 Series Digital I/O Author: Ian Abbott Devices: [Amplicon] PC212E (pc212e), PC214E (pc214e), PC215E (pc215e), - PCI215 (pci215), PC218E (pc218e), PC272E (pc272e), PCI272 (pci272) -Updated: Mon, 05 Nov 2007 14:04:04 +0000 + PCI215 (pci215 or amplc_dio200), PC218E (pc218e), PC272E (pc272e), + PCI272 (pci272 or amplc_dio200) +Updated: Wed, 22 Oct 2008 13:36:02 +0100 Status: works Configuration options - PC212E, PC214E, PC215E, PC218E, PC272E: @@ -499,8 +556,8 @@ order they appear in the channel list. Driver: amplc_pc236 Description: Amplicon PC36AT, PCI236 Author: Ian Abbott -Devices: [Amplicon] PC36AT (pc36at), PCI236 (pci236) -Updated: Fri, 23 Aug 2002 11:41:11 +0100 +Devices: [Amplicon] PC36AT (pc36at), PCI236 (pci236 or amplc_pc236) +Updated: Wed, 01 Apr 2009 15:41:25 +0100 Status: works Configuration options - PC36AT: @@ -518,7 +575,7 @@ as subdevice 0. Subdevice 1 pretends to be a digital input device, but it always returns 0 when read. However, if you run a command with scan_begin_src=TRIG_EXT, -a rising edge on port C bit 7 acts as an external trigger, which can be +a rising edge on port C bit 3 acts as an external trigger, which can be used to wake up tasks. This is like the comedi_parport device, but the only way to physically disable the interrupt on the PC36AT is to remove the IRQ jumper. If no interrupt is connected, then subdevice 1 is @@ -529,8 +586,8 @@ unused. Driver: amplc_pc263 Description: Amplicon PC263, PCI263 Author: Ian Abbott -Devices: [Amplicon] PC263 (pc263), PCI263 (pci263) -Updated: Tue, 20 Aug 2002 11:41:01 +0100 +Devices: [Amplicon] PC263 (pc263), PCI263 (pci263 or amplc_pc263) +Updated: Wed, 22 Oct 2008 14:10:53 +0100 Status: works Configuration options - PC263: @@ -551,8 +608,9 @@ The state of the outputs can be read. Driver: amplc_pci224 Description: Amplicon PCI224, PCI234 Author: Ian Abbott -Devices: [Amplicon] PCI224 (pci224), PCI234 (pci234) -Updated: Thu, 24 Feb 2005 12:29:26 +0000 +Devices: [Amplicon] PCI224 (amplc_pci224 or pci224), + PCI234 (amplc_pci224 or pci234) +Updated: Wed, 22 Oct 2008 12:25:08 +0100 Status: works, but see caveats Supports: @@ -633,9 +691,10 @@ Description: Amplicon PCI230, PCI260 Multifunction I/O boards Author: Allan Willcox , Steve D Sharples , Ian Abbott -Updated: Mon, 03 Dec 2007 17:11:47 +0000 -Devices: [Amplicon] PCI230 (pci230 or amplc_pci230), PCI230+ (pci230+), - PCI260 (pci260 or amplc_pci230), PCI260+ (pci260+) +Updated: Wed, 22 Oct 2008 12:34:49 +0100 +Devices: [Amplicon] PCI230 (pci230 or amplc_pci230), + PCI230+ (pci230+ or amplc_pci230), + PCI260 (pci260 or amplc_pci230), PCI260+ (pci260+ or amplc_pci230) Status: works Configuration options: @@ -645,18 +704,18 @@ Configuration options: will be used. Configuring a "amplc_pci230" will match any supported card and it will -be treated as "pci230" or "pci260". Configuring a "pci230" will match a -PCI230 or PCI230+ card and it will be treated as a PCI230. Configuring -a "pci260" will match a PCI260 or PCI260+ card and it will be treated as -a PCI260. Configuring a "pci230+" will match a PCI230+ card. -Configuring a "pci260+" will match a PCI260+ card. +choose the best match, picking the "+" models if possible. Configuring +a "pci230" will match a PCI230 or PCI230+ card and it will be treated as +a PCI230. Configuring a "pci260" will match a PCI260 or PCI260+ card +and it will be treated as a PCI260. Configuring a "pci230+" will match +a PCI230+ card. Configuring a "pci260+" will match a PCI260+ card. Subdevices: PCI230(+) PCI260(+) --------- --------- Subdevices 3 1 - 0 AI AI + 0 AI AI 1 AO 2 DIO @@ -664,10 +723,10 @@ AI Subdevice: The AI subdevice has 16 single-ended channels or 8 differential channels. - + The PCI230 and PCI260 cards have 12-bit resolution. The PCI230+ and PCI260+ cards have 16-bit resolution. - + For differential mode, use inputs 2N and 2N+1 for channel N (e.g. use inputs 14 and 15 for channel 7). If the card is physically a PCI230 or PCI260 then it actually uses a "pseudo-differential" mode where the @@ -850,8 +909,9 @@ https://bugs.comedi.org. Driver: cb_pcidas Description: MeasurementComputing PCI-DAS series with the AMCC S5933 PCI controller Author: Ivan Martinez , - Frank Mori Hess -Updated: 2003-3-11 + Frank Mori Hess , + Brice Dubost +Updated: 2010-11-19 Devices: [Measurement Computing] PCI-DAS1602/16 (cb_pcidas), PCI-DAS1602/16jr, PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001, PCI_DAS1002 @@ -874,6 +934,15 @@ For commands, the scanned channels must be consecutive (i.e. 4-5-6-7, 2-3-4,...), and must all have the same range and aref. +AI Triggering: + For start_src == TRIG_EXT, the A/D EXTERNAL TRIGGER IN (pin 45) is used. + For 1602 series, the start_arg is interpreted as follows: + start_arg == 0 => gated triger (level high) + start_arg == CR_INVERT => gated triger (level low) + start_arg == CR_EDGE => Rising edge + start_arg == CR_EDGE | CR_INVERT => Falling edge + For the other boards the trigger will be done on rising edge + Driver: cb_pcidda @@ -941,7 +1010,7 @@ Driver: cb_pcimdda Description: Measurement Computing PCIM-DDA06-16 Devices: [Measurement Computing] PCIM-DDA06-16 (cb_pcimdda) Author: Calin Culianu -Updated: Thu, 20 Jun 2002 16:19:41 -0500 +Updated: Mon, 14 Apr 2008 15:15:51 +0100 Status: works All features of the PCIM-DDA06-16 board are supported. This board @@ -973,8 +1042,8 @@ output modes on the board: to initiate the simultaneous XFER. Configuration Options: - [0] PCI bus (optional) (unimplemented) - [1] PCI slot (optional) (unimplemented) + [0] PCI bus (optional) + [1] PCI slot (optional) [2] analog output range jumper setting 0 == +/- 5 V 1 == +/- 10 V @@ -1130,29 +1199,33 @@ Driver: daqboard2000 Description: IOTech DAQBoard/2000 Author: Anders Blomdell Status: works +Updated: Mon, 14 Apr 2008 15:28:52 +0100 Devices: [IOTech] DAQBoard/2000 (daqboard2000) Much of the functionality of this driver was determined from reading the source code for the Windows driver. -The FPGA on the board requires initialization code, which can +The FPGA on the board requires initialization code, which can be loaded by comedi_config using the -i option. The initialization code is available from http://www.comedi.org in the comedi_nonfree_firmware tarball. Configuration options: - none + [0] - PCI bus of device (optional) + [1] - PCI slot of device (optional) + If bus/slot is not specified, the first supported + PCI device found will be used. Driver: das08 Description: DAS-08 compatible boards Author: Warren Jasper, ds, Frank Hess -Devices: [Keithley Metrabyte] DAS08 (das08), [ComputerBoards] DAS08 (das08), +Devices: [Keithley Metrabyte] DAS08 (isa-das08), [ComputerBoards] DAS08 (isa-das08), DAS08-PGM (das08-pgm), DAS08-PGH (das08-pgh), DAS08-PGL (das08-pgl), DAS08-AOH (das08-aoh), DAS08-AOL (das08-aol), DAS08-AOM (das08-aom), DAS08/JR-AO (das08/jr-ao), - DAS08/JR-16-AO (das08jr-16-ao), PCI-DAS08 (pci-das08), + DAS08/JR-16-AO (das08jr-16-ao), PCI-DAS08 (das08), PC104-DAS08 (pc104-das08), DAS08/JR/16 (das08jr/16) Status: works @@ -1164,7 +1237,6 @@ Options (for ISA cards): Options (for pci-das08): [0] - bus (optional) [1] = slot (optional) -Use the name 'pci-das08' for the pci-das08, NOT 'das08'. The das08 driver doesn't support asynchronous commands, since the cheap das08 hardware doesn't really support them. The @@ -1509,8 +1581,15 @@ Description: Data Translation DT3000 series Author: ds Devices: [Data Translation] DT3001 (dt3000), DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005, DT3004-200 +Updated: Mon, 14 Apr 2008 15:41:24 +0100 Status: works +Configuration Options: + [0] - PCI bus of device (optional) + [1] - PCI slot of device (optional) + If bus/slot is not specified, the first supported + PCI device found will be used. + There is code to support AI commands, but it may not work. AO commands are not supported. @@ -1636,9 +1715,9 @@ Author: Anders Blomdell Status: works Devices: [JR3] PCI force sensor board (jr3_pci) - The DSP on the board requires initialization code, which can - be loaded by placing it in /lib/firmware/comedi. - The initialization code should be somewhere on the media you got + The DSP on the board requires initialization code, which can + be loaded by placing it in /lib/firmware/comedi. + The initialization code should be somewhere on the media you got with your card. One version is available from http://www.comedi.org in the comedi_nonfree_firmware tarball. @@ -1654,9 +1733,15 @@ Driver: ke_counter Description: Driver for Kolter Electronic Counter Card Devices: [Kolter Electronic] PCI Counter Card (ke_counter) Author: Michael Hillmann -Updated: 2002.4.11 +Updated: Mon, 14 Apr 2008 15:42:42 +0100 Status: tested +Configuration Options: + [0] - PCI bus of device (optional) + [1] - PCI slot of device (optional) + If bus/slot is not specified, the first supported + PCI device found will be used. + This driver is a simple driver to read the counter values from Kolter Electronic PCI Counter Card. @@ -1958,7 +2043,7 @@ Driver: ni_labpc Description: National Instruments Lab-PC (& compatibles) Author: Frank Mori Hess Devices: [National Instruments] Lab-PC-1200 (labpc-1200), - Lab-PC-1200AI (labpc-1200ai), Lab-PC+ (lab-pc+), PCI-1200 (pci-1200) + Lab-PC-1200AI (labpc-1200ai), Lab-PC+ (lab-pc+), PCI-1200 (ni_labpc) Status: works Tested with lab-pc-1200. For the older Lab-PC+, not all input ranges @@ -2057,6 +2142,11 @@ supports simple digital I/O; no handshaking is supported. DMA mostly works for the PCI-DIO32HS, but only in timed input mode. +The PCI-DIO-32HS/PCI-6533 has a configurable external trigger. Setting +scan_begin_arg to 0 or CR_EDGE triggers on the leading edge. Setting +scan_begin_arg to CR_INVERT or (CR_EDGE | CR_INVERT) triggers on the +trailing edge. + This driver could be easily modified to support AT-MIO32HS and AT-MIO96. @@ -2076,14 +2166,15 @@ Devices: [National Instruments] PCI-MIO-16XE-50 (ni_pcimio), PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1, PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E, PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E, PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, - PCI-6110, PCI-6111, PCI-6220, PCI-6221, PCI-6224, PCI-6225, PCI-6229, - PCI-6250, PCI-6251, PCIe-6251, PCI-6254, PCI-6259, PCIe-6259, + PCI-6110, PCI-6111, PCI-6220, PCI-6221, PCI-6224, PXI-6224, + PCI-6225, PXI-6225, PCI-6229, PCI-6250, PCI-6251, PCIe-6251, PXIe-6251, + PCI-6254, PCI-6259, PCIe-6259, PCI-6280, PCI-6281, PXI-6281, PCI-6284, PCI-6289, PCI-6711, PXI-6711, PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E, PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143 -Updated: Wed Nov 29 10:30:36 EST 2006 +Updated: Tue, 15 Nov 2011 15:10:37 +0000 These boards are almost identical to the AT-MIO E series, except that they use the PCI bus instead of ISA (i.e., AT). See the notes for @@ -2150,6 +2241,31 @@ DAQ 6601/6602 User Manual (NI 322137B-01) +Driver: ni_tiocmd +Description: National Instruments general purpose counters command support +Devices: +Author: J.P. Mellor , + Herman.Bruyninckx@mech.kuleuven.ac.be, + Wim.Meeussen@mech.kuleuven.ac.be, + Klaas.Gadeyne@mech.kuleuven.ac.be, + Frank Mori Hess +Updated: Fri, 11 Apr 2008 12:32:35 +0100 +Status: works + +This module is not used directly by end-users. Rather, it +is used by other drivers (for example ni_660x and ni_pcimio) +to provide command support for NI's general purpose counters. +It was originally split out of ni_tio.c to stop the 'ni_tio' +module depending on the 'mite' module. + +References: +DAQ 660x Register-Level Programmer Manual (NI 370505A-01) +DAQ 6601/6602 User Manual (NI 322137B-01) +340934b.pdf DAQ-STC reference manual + + + + Driver: pcl711 Description: Advantech PCL-711 and 711b, ADLink ACL-8112 Author: ds, Janne Jalkanen , Eric Bunn @@ -2659,8 +2775,8 @@ Devices: [Quatech] DAQP-208 (daqp), DAQP-308 Driver: rtd520 Description: Real Time Devices PCI4520/DM7520 Author: Dan Christian -Devices: [Real Time Devices] DM7520HR-1 (DM7520), DM7520HR-8 (DM7520-8), - PCI4520 (PCI4520), PCI4520-8 (PCI4520-8) +Devices: [Real Time Devices] DM7520HR-1 (rtd520), DM7520HR-8, + PCI4520, PCI4520-8 Status: Works. Only tested on DM7520-8. Not SMP safe. Configuration options: @@ -2675,6 +2791,7 @@ Driver: rti800 Description: Analog Devices RTI-800/815 Author: ds Status: unknown +Updated: Fri, 05 Sep 2008 14:50:44 +0100 Devices: [Analog Devices] RTI-800 (rti800), RTI-815 (rti815) Configuration options: @@ -2694,11 +2811,11 @@ Configuration options: [5] - DAC 0 range 0 = [-10,10] 1 = [0,10] - [5] - DAC 0 encoding + [6] - DAC 0 encoding 0 = two's complement 1 = straight binary - [6] - DAC 1 range (same as DAC 0) - [7] - DAC 1 encoding (same as DAC 0) + [7] - DAC 1 range (same as DAC 0) + [8] - DAC 1 encoding (same as DAC 0) @@ -2839,8 +2956,8 @@ Driver: usbdux Description: University of Stirling USB DAQ & INCITE Technology Limited Devices: [ITL] USB-DUX (usbdux.o) Author: Bernd Porr -Updated: 25 Nov 2007 -Status: Testing +Updated: 8 Dec 2008 +Status: Stable Configuration options: You have to upload firmware with the -i option. The firmware is usually installed under /usr/share/usb or @@ -2860,7 +2977,16 @@ Driver: usbduxfast Description: ITL USB-DUXfast Devices: [ITL] USB-DUX (usbduxfast.o) Author: Bernd Porr -Updated: 04 Dec 2006 +Updated: 08 Dec 2008 +Status: stable + + + +Driver: usbduxsigma +Description: University of Stirling USB DAQ & INCITE Technology Limited +Devices: [ITL] USB-DUX (usbduxsigma.o) +Author: Bernd Porr +Updated: 21 Jul 2011 Status: testing