DIST php-5.6.14.tar.bz2 14073920 SHA256 36f295f11641c1839a5df00e693f685fd134c65e8a1d46e8ee0abae8662b2eb0 SHA512 af0c7fa5c7be15839b1189b2544ff725b935228030087c206f83727e7885750030b10bf2bfbd27adea6f18af90d4ecd3ced9defec88c5f98f7ed26b4e4c57981 WHIRLPOOL 8e31fc3dbeb22fa2a59112d2dcbe28f8102c8d5a14fd716d17f909399c06d27a10ea32d43ebd1a12cea78d9fd949ae7c7882628ae0c3abd7354d165107fa0c9d
DIST php-5.6.16.tar.bz2 14066209 SHA256 4fe6f40964c1bfaba05fc144ba20a2cdad33e11685f4f101ea5a48b98bbcd2ae SHA512 08ceb48277785e2075a1bd8035cb32eb8bdddeff6695734d3f1f0721415beddc58413257a490852a93df445d2d342badea46801e46d96f0b85517124ba4020c9 WHIRLPOOL d8669398d03288e9cf0f519a2e76eeb6b7e79f85f60b9f9fbdcc40ae313a3d9fa01b9f173cd354ab8b328b7178a433f54e4f0cf06152ec023c11f00bb98cc5b0
DIST php-7.0.0.tar.bz2 13975832 SHA256 a92a54306832167a39f7c0ec00524fc6f3f7d985c806caa7632561d0ddedfcea SHA512 850d1c8c1d66e70caa801520bc1824e17c0a64190e3e3776af422cd3148847dc99b20bff12cecdd679b724b417458aaddb20b899487cf0c7463cac3b5dbf0c12 WHIRLPOOL cf081676f86ff6ea32c3c16ac11470046767e20541a7b986a3499cb4baadb46d06f98bb0026debff0ed10200556fcc80c61c41341340b20e119bf9c21baa46a3
-DIST php-7.0.0RC7.tar.bz2 13472595 SHA256 0b1773df54b2ed2aaa8ed04188d02fa28189045f8893c3b59afd8aacf9a7db9c SHA512 58d03d83f2dd5dabcb468df42b3b31502dcdedca2463f7cbd9609ef611fe3bf7a64cc78505b52b2c7c6bf859a66ee6bc887462d1c5557edfe99ee83f398c2e47 WHIRLPOOL 624e7b606ff5f5a36140167538c7a224ff61c4a8639f348a3848d8fda6260a72d06707d055d7727417477067bd0346f631235f5dc68541a549747ca72b2570c9
-DIST php-7.0.0RC8.tar.bz2 13975805 SHA256 8c46621e80b610749d2d31439e9b6db7b881c0249d1df1f4c3e05fdd46a2d108 SHA512 5066966cd2e7f011c20a17a427b74db84c74035182b4de1d991d2b76060a33c84da9b3b75dafc83fb40f0de0649ba0568454b90d48e4b2356524bc6ff0444138 WHIRLPOOL 6b1f8192f83250b140c39e266c74f428f1f7258f8128483380656a3139b6344a66637bec87a4cfe593bc0f3df8cfde5b3f562f96dbfb83c8a5d8acf9fc2838a8
DIST php-patchset-5.4-r2.tar.bz2 5824 SHA256 4a47f4d31f50a244f85349486cdb3474cf315562e097ed4c116c2b9b5730ecef SHA512 3c2523458a627373da7acb93fb2cd621f50b19fe2ba1d30beb62eeaaa39045262b917cfd0b631046fec9c8027cfa99bd0426a079ab45eb172b21d25d6e085dde WHIRLPOOL fe4f015e2f0dc66cc23ef16fb5bb33117952593ae0770d4bcd37ecc1c431cbcc7874189d265696305c60b4e395e7ce902667e38203db46867304868271affdea
+++ /dev/null
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI=5
-
-inherit eutils autotools flag-o-matic versionator depend.apache apache-module libtool systemd
-
-KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd ~x86-freebsd ~amd64-linux ~ia64-linux ~x86-linux ~ppc-macos ~x64-macos ~x86-macos"
-
-function php_get_uri ()
-{
- case "${1}" in
- "php-pre")
- echo "http://downloads.php.net/ab/${2}"
- ;;
- "php")
- echo "http://www.php.net/distributions/${2}"
- ;;
- "olemarkus")
- echo "https://dev.gentoo.org/~olemarkus/php/${2}"
- ;;
- "gentoo")
- echo "mirror://gentoo/${2}"
- ;;
- *)
- die "unhandled case in php_get_uri"
- ;;
- esac
-}
-
-PHP_MV="$(get_major_version)"
-SLOT="$(get_version_component_range 1-2)"
-
-# alias, so we can handle different types of releases (finals, rcs, alphas,
-# betas, ...) w/o changing the whole ebuild
-PHP_PV="${PV/_rc/RC}"
-PHP_PV="${PHP_PV/_alpha/alpha}"
-PHP_PV="${PHP_PV/_beta/beta}"
-PHP_RELEASE="php"
-[[ ${PV} == ${PV/_alpha/} ]] || PHP_RELEASE="php-pre"
-[[ ${PV} == ${PV/_beta/} ]] || PHP_RELEASE="php-pre"
-[[ ${PV} == ${PV/_rc/} ]] || PHP_RELEASE="php-pre"
-PHP_P="${PN}-${PHP_PV}"
-
-PHP_SRC_URI="$(php_get_uri "${PHP_RELEASE}" "${PHP_P}.tar.bz2")"
-
-PHP_FPM_CONF_VER="1"
-
-SRC_URI="${PHP_SRC_URI}"
-
-DESCRIPTION="The PHP language runtime engine: CLI, CGI, FPM/FastCGI, Apache2 and embed SAPIs"
-HOMEPAGE="http://php.net/"
-LICENSE="PHP-3"
-
-S="${WORKDIR}/${PHP_P}"
-
-# We can build the following SAPIs in the given order
-SAPIS="embed cli cgi fpm apache2"
-
-# SAPIs and SAPI-specific USE flags (cli SAPI is default on):
-IUSE="${IUSE}
- ${SAPIS/cli/+cli}
- threads"
-
-IUSE="${IUSE} bcmath berkdb bzip2 calendar cdb cjk
- crypt +ctype curl debug
- enchant exif frontbase +fileinfo +filter firebird
- flatfile ftp gd gdbm gmp +hash +iconv imap inifile
- intl iodbc ipv6 +json kerberos ldap ldap-sasl libedit mhash
- mysql mysqli nls
- oci8-instant-client odbc +opcache pcntl pdo +phar +posix postgres qdbm
- readline recode selinux +session sharedmem
- +simplexml snmp soap sockets spell sqlite ssl
- sysvipc systemd tidy +tokenizer truetype unicode vpx wddx
- +xml xmlreader xmlwriter xmlrpc xpm xslt zip zlib"
-
-DEPEND="
- >=app-eselect/eselect-php-0.7.1-r3[apache2?,fpm?]
- >=dev-libs/libpcre-8.32[unicode]
- apache2? ( || ( >=www-servers/apache-2.4[apache2_modules_unixd,threads=]
- <www-servers/apache-2.4[threads=] ) )"
-
-# The supported (that is, autodetected) versions of BDB are listed in
-# the ./configure script. Other versions *work*, but we need to stick to
-# the ones that can be detected to avoid a repeat of bug #564824.
-DEPEND="${DEPEND}
- berkdb? ( || ( sys-libs/db:5.1
- sys-libs/db:4.8
- sys-libs/db:4.7
- sys-libs/db:4.6
- sys-libs/db:4.5 ) )
- bzip2? ( app-arch/bzip2 )
- cdb? ( || ( dev-db/cdb dev-db/tinycdb ) )
- cjk? ( !gd? (
- virtual/jpeg:0
- media-libs/libpng:0=
- sys-libs/zlib
- ) )
- crypt? ( >=dev-libs/libmcrypt-2.4 )
- curl? ( >=net-misc/curl-7.10.5 )
- enchant? ( app-text/enchant )
- exif? ( !gd? (
- virtual/jpeg:0
- media-libs/libpng:0=
- sys-libs/zlib
- ) )
- firebird? ( dev-db/firebird )
- gd? ( virtual/jpeg:0 media-libs/libpng:0= sys-libs/zlib )
- gdbm? ( >=sys-libs/gdbm-1.8.0 )
- gmp? ( dev-libs/gmp:0 )
- iconv? ( virtual/libiconv )
- imap? ( virtual/imap-c-client[ssl=] )
- intl? ( dev-libs/icu:= )
- iodbc? ( dev-db/libiodbc )
- kerberos? ( virtual/krb5 )
- ldap? ( >=net-nds/openldap-1.2.11 )
- ldap-sasl? ( dev-libs/cyrus-sasl >=net-nds/openldap-1.2.11 )
- libedit? ( || ( sys-freebsd/freebsd-lib dev-libs/libedit ) )
- nls? ( sys-devel/gettext )
- oci8-instant-client? ( dev-db/oracle-instantclient-basic )
- odbc? ( >=dev-db/unixODBC-1.8.13 )
- postgres? ( dev-db/postgresql:* )
- qdbm? ( dev-db/qdbm )
- readline? ( sys-libs/readline:0 )
- recode? ( app-text/recode )
- sharedmem? ( dev-libs/mm )
- simplexml? ( >=dev-libs/libxml2-2.6.8 )
- snmp? ( >=net-analyzer/net-snmp-5.2 )
- soap? ( >=dev-libs/libxml2-2.6.8 )
- spell? ( >=app-text/aspell-0.50 )
- sqlite? ( >=dev-db/sqlite-3.7.6.3 )
- ssl? ( dev-libs/openssl:0 )
- tidy? ( app-text/htmltidy )
- truetype? (
- =media-libs/freetype-2*
- !gd? (
- virtual/jpeg:0 media-libs/libpng:0= sys-libs/zlib )
- )
- unicode? ( dev-libs/oniguruma )
- vpx? ( media-libs/libvpx )
- wddx? ( >=dev-libs/libxml2-2.6.8 )
- xml? ( >=dev-libs/libxml2-2.6.8 )
- xmlrpc? ( >=dev-libs/libxml2-2.6.8 virtual/libiconv )
- xmlreader? ( >=dev-libs/libxml2-2.6.8 )
- xmlwriter? ( >=dev-libs/libxml2-2.6.8 )
- xpm? (
- x11-libs/libXpm
- virtual/jpeg:0
- media-libs/libpng:0= sys-libs/zlib
- )
- xslt? ( dev-libs/libxslt >=dev-libs/libxml2-2.6.8 )
- zip? ( sys-libs/zlib )
- zlib? ( sys-libs/zlib )
- virtual/mta
-"
-
-php="=${CATEGORY}/${PF}"
-
-REQUIRED_USE="
- truetype? ( gd )
- vpx? ( gd )
- cjk? ( gd )
- exif? ( gd )
-
- xpm? ( gd )
- gd? ( zlib )
- simplexml? ( xml )
- soap? ( xml )
- wddx? ( xml )
- xmlrpc? ( || ( xml iconv ) )
- xmlreader? ( xml )
- xslt? ( xml )
- ldap-sasl? ( ldap )
- mhash? ( hash )
- phar? ( hash )
-
- qdbm? ( !gdbm )
- readline? ( !libedit )
- recode? ( !imap !mysqli )
- sharedmem? ( !threads )
-
- mysql? ( || ( mysqli pdo ) )
-
- !cli? ( !cgi? ( !fpm? ( !apache2? ( !embed? ( cli ) ) ) ) )"
-
-RDEPEND="${DEPEND}"
-
-RDEPEND="${RDEPEND}
- fpm? (
- selinux? ( sec-policy/selinux-phpfpm )
- systemd? ( sys-apps/systemd ) )"
-
-DEPEND="${DEPEND}
- sys-devel/flex
- >=sys-devel/m4-1.4.3
- >=sys-devel/libtool-1.5.18"
-
-# Allow users to install production version if they want to
-
-case "${PHP_INI_VERSION}" in
- production|development)
- ;;
- *)
- PHP_INI_VERSION="development"
- ;;
-esac
-
-PHP_INI_UPSTREAM="php.ini-${PHP_INI_VERSION}"
-PHP_INI_FILE="php.ini"
-
-want_apache
-
-pkg_setup() {
- depend.apache_pkg_setup
-}
-
-php_install_ini() {
- local phpsapi="${1}"
-
- # work out where we are installing the ini file
- php_set_ini_dir "${phpsapi}"
-
- local phpinisrc="${PHP_INI_UPSTREAM}-${phpsapi}"
- cp "${PHP_INI_UPSTREAM}" "${phpinisrc}" || die
-
- # default to /tmp for save_path, bug #282768
- sed -e 's|^;session.save_path .*$|session.save_path = "'"${EPREFIX}"'/tmp"|g' -i "${phpinisrc}" || die
-
- # Set the extension dir
- sed -e "s|^extension_dir .*$|extension_dir = ${extension_dir}|g" -i "${phpinisrc}" || die
-
- # Set the include path to point to where we want to find PEAR packages
- sed -e 's|^;include_path = ".:/php/includes".*|include_path = ".:'"${EPREFIX}"'/usr/share/php'${PHP_MV}':'"${EPREFIX}"'/usr/share/php"|' -i "${phpinisrc}" || die
-
- dodir "${PHP_INI_DIR#${EPREFIX}}"
- insinto "${PHP_INI_DIR#${EPREFIX}}"
- newins "${phpinisrc}" "${PHP_INI_FILE}"
-
- elog "Installing php.ini for ${phpsapi} into ${PHP_INI_DIR#${EPREFIX}}"
- elog
-
- dodir "${PHP_EXT_INI_DIR#${EPREFIX}}"
- dodir "${PHP_EXT_INI_DIR_ACTIVE#${EPREFIX}}"
-
- if use_if_iuse opcache; then
- elog "Adding opcache to $PHP_EXT_INI_DIR"
- echo "zend_extension=${PHP_DESTDIR}/$(get_libdir)/opcache.so" >> \
- "${D}/${PHP_EXT_INI_DIR}"/opcache.ini
- dosym "${PHP_EXT_INI_DIR#${EPREFIX}}/opcache.ini" \
- "${PHP_EXT_INI_DIR_ACTIVE#${EPREFIX}}/opcache.ini"
- fi
-
- # SAPI-specific handling
- if [[ "${sapi}" == "fpm" ]] ; then
- einfo "Installing FPM config files php-fpm.conf and www.conf"
- insinto "${PHP_INI_DIR#${EPREFIX}}"
- doins sapi/fpm/php-fpm.conf
- insinto "${PHP_INI_DIR#${EPREFIX}}/fpm.d"
- doins sapi/fpm/www.conf
- fi
-
- dodoc php.ini-development
- dodoc php.ini-production
-}
-
-php_set_ini_dir() {
- PHP_INI_DIR="${EPREFIX}/etc/php/${1}-php${SLOT}"
- PHP_EXT_INI_DIR="${PHP_INI_DIR}/ext"
- PHP_EXT_INI_DIR_ACTIVE="${PHP_INI_DIR}/ext-active"
-}
-
-src_prepare() {
- # Change PHP branding
- # Get the alpha/beta/rc version
- sed -re "s|^(PHP_EXTRA_VERSION=\").*(\")|\1-pl${PR/r/}-gentoo\2|g" \
- -i configure.in || die "Unable to change PHP branding"
-
- # Patch PHP to show Gentoo as the server platform
- sed -e 's/PHP_UNAME=`uname -a | xargs`/PHP_UNAME=`uname -s -n -r -v | xargs`/g' \
- -i configure.in || die "Failed to fix server platform name"
-
- # Patch PHP to support heimdal instead of mit-krb5
- if has_version "app-crypt/heimdal" ; then
- sed -e 's|gssapi_krb5|gssapi|g' -i acinclude.m4 \
- || die "Failed to fix heimdal libname"
- sed -e 's|PHP_ADD_LIBRARY(k5crypto, 1, $1)||g' -i acinclude.m4 \
- || die "Failed to fix heimdal crypt library reference"
- fi
-
- # Add user patches #357637
- epatch_user
-
- # Force rebuilding aclocal.m4
- rm -f aclocal.m4 || die
- eautoreconf
-
- if [[ ${CHOST} == *-darwin* ]] ; then
- # http://bugs.php.net/bug.php?id=48795, bug #343481
- sed -i -e '/BUILD_CGI="\\$(CC)/s/CC/CXX/' configure || die
- fi
-
- # In php-7.x, the FPM pool configuration files have been split off
- # of the main config. By default the pool config files go in
- # e.g. /etc/php-fpm.d, which isn't slotted. So here we move the
- # include directory to a subdirectory "fpm.d" of $PHP_INI_DIR. Later
- # we'll install the pool configuration file "www.conf" there.
- php_set_ini_dir fpm
- sed -i "s~^include=.*$~include=${PHP_INI_DIR}/fpm.d/*.conf~" \
- sapi/fpm/php-fpm.conf.in \
- || die 'failed to move the include directory in php-fpm.conf'
-}
-
-src_configure() {
- addpredict /usr/share/snmp/mibs/.index
- addpredict /var/lib/net-snmp/mib_indexes
-
- PHP_DESTDIR="${EPREFIX}/usr/$(get_libdir)/php${SLOT}"
-
- local our_conf=(
- --prefix="${PHP_DESTDIR}"
- --mandir="${PHP_DESTDIR}/man"
- --infodir="${PHP_DESTDIR}/info"
- --libdir="${PHP_DESTDIR}/lib"
- --with-libdir="$(get_libdir)"
- --without-pear
- $(use_enable threads maintainer-zts)
- )
-
- our_conf+=(
- $(use_enable bcmath bcmath)
- $(use_with bzip2 bz2 "${EPREFIX}/usr")
- $(use_enable calendar calendar)
- $(use_enable ctype ctype)
- $(use_with curl curl "${EPREFIX}/usr")
- $(use_enable xml dom)
- $(use_with enchant enchant "${EPREFIX}/usr")
- $(use_enable exif exif)
- $(use_enable fileinfo fileinfo)
- $(use_enable filter filter)
- $(use_enable ftp ftp)
- $(use_with nls gettext "${EPREFIX}/usr")
- $(use_with gmp gmp "${EPREFIX}/usr")
- $(use_enable hash hash)
- $(use_with mhash mhash "${EPREFIX}/usr")
- $(use_with iconv iconv \
- $(use elibc_glibc || use elibc_musl || echo "${EPREFIX}/usr"))
- $(use_enable intl intl)
- $(use_enable ipv6 ipv6)
- $(use_enable json json)
- $(use_with kerberos kerberos "${EPREFIX}/usr")
- $(use_enable xml libxml)
- $(use_with xml libxml-dir "${EPREFIX}/usr")
- $(use_enable unicode mbstring)
- $(use_with crypt mcrypt "${EPREFIX}/usr")
- $(use_with unicode onig "${EPREFIX}/usr")
- $(use_with ssl openssl "${EPREFIX}/usr")
- $(use_with ssl openssl-dir "${EPREFIX}/usr")
- $(use_enable pcntl pcntl)
- $(use_enable phar phar)
- $(use_enable pdo pdo)
- $(use_enable opcache opcache)
- $(use_with postgres pgsql "${EPREFIX}/usr")
- $(use_enable posix posix)
- $(use_with spell pspell "${EPREFIX}/usr")
- $(use_with recode recode "${EPREFIX}/usr")
- $(use_enable simplexml simplexml)
- $(use_enable sharedmem shmop)
- $(use_with snmp snmp "${EPREFIX}/usr")
- $(use_enable soap soap)
- $(use_enable sockets sockets)
- $(use_with sqlite sqlite3 "${EPREFIX}/usr")
- $(use_enable sysvipc sysvmsg)
- $(use_enable sysvipc sysvsem)
- $(use_enable sysvipc sysvshm)
- $(use_with systemd fpm-systemd)
- $(use_with tidy tidy "${EPREFIX}/usr")
- $(use_enable tokenizer tokenizer)
- $(use_enable wddx wddx)
- $(use_enable xml xml)
- $(use_enable xmlreader xmlreader)
- $(use_enable xmlwriter xmlwriter)
- $(use_with xmlrpc xmlrpc)
- $(use_with xslt xsl "${EPREFIX}/usr")
- $(use_enable zip zip)
- $(use_with zlib zlib "${EPREFIX}/usr")
- $(use_enable debug debug)
- )
-
- # DBA support
- if use cdb || use berkdb || use flatfile || use gdbm || use inifile \
- || use qdbm ; then
- our_conf+=( "--enable-dba${shared}" )
- fi
-
- # DBA drivers support
- our_conf+=(
- $(use_with cdb cdb)
- $(use_with berkdb db4 "${EPREFIX}/usr")
- $(use_enable flatfile flatfile)
- $(use_with gdbm gdbm "${EPREFIX}/usr")
- $(use_enable inifile inifile)
- $(use_with qdbm qdbm "${EPREFIX}/usr")
- )
-
- # Support for the GD graphics library
- our_conf+=(
- $(use_with truetype freetype-dir "${EPREFIX}/usr")
- $(use_enable cjk gd-jis-conv)
- $(use_with gd jpeg-dir "${EPREFIX}/usr")
- $(use_with gd png-dir "${EPREFIX}/usr")
- $(use_with xpm xpm-dir "${EPREFIX}/usr")
- $(use_with vpx vpx-dir "${EPREFIX}/usr")
- )
- # enable gd last, so configure can pick up the previous settings
- our_conf+=( $(use_with gd gd) )
-
- # IMAP support
- if use imap ; then
- our_conf+=(
- $(use_with imap imap "${EPREFIX}/usr")
- $(use_with ssl imap-ssl "${EPREFIX}/usr")
- )
- fi
-
- # Interbase/firebird support
- our_conf+=( $(use_with firebird interbase "${EPREFIX}/usr") )
-
- # LDAP support
- if use ldap ; then
- our_conf+=(
- $(use_with ldap ldap "${EPREFIX}/usr")
- $(use_with ldap-sasl ldap-sasl "${EPREFIX}/usr")
- )
- fi
-
- # MySQL support
- local mysqllib="mysqlnd"
- local mysqlilib="mysqlnd"
-
- our_conf+=( $(use_with mysqli mysqli "${mysqlilib}") )
-
- local mysqlsock="${EPREFIX}/var/run/mysqld/mysqld.sock"
- if use mysql || use mysqli ; then
- our_conf+=( $(use_with mysql mysql-sock "${mysqlsock}") )
- fi
-
- # ODBC support
- our_conf+=(
- $(use_with odbc unixODBC "${EPREFIX}/usr")
- $(use_with iodbc iodbc "${EPREFIX}/usr")
- )
-
- # Oracle support
- our_conf+=( $(use_with oci8-instant-client oci8) )
-
- # PDO support
- if use pdo ; then
- our_conf+=(
- $(use_with mysql pdo-mysql "${mysqllib}")
- $(use_with postgres pdo-pgsql)
- $(use_with sqlite pdo-sqlite "${EPREFIX}/usr")
- $(use_with odbc pdo-odbc "unixODBC,${EPREFIX}/usr")
- $(use_with oci8-instant-client pdo-oci)
- )
- fi
-
- # readline/libedit support
- our_conf+=(
- $(use_with readline readline "${EPREFIX}/usr")
- $(use_with libedit libedit "${EPREFIX}/usr")
- )
-
- # Session support
- if use session ; then
- our_conf+=( $(use_with sharedmem mm "${EPREFIX}/usr") )
- else
- our_conf+=( $(use_enable session session) )
- fi
-
- # Use pic for shared modules such as apache2's mod_php
- our_conf+=( --with-pic )
-
- # we use the system copy of pcre
- # --with-pcre-regex affects ext/pcre
- # --with-pcre-dir affects ext/filter and ext/zip
- our_conf+=(
- --with-pcre-regex="${EPREFIX}/usr"
- --with-pcre-dir="${EPREFIX}/usr"
- )
-
- # Catch CFLAGS problems
- # Fixes bug #14067.
- # Changed order to run it in reverse for bug #32022 and #12021.
- replace-cpu-flags "k6*" "i586"
-
- # Support user-passed configuration parameters
- our_conf+=( ${EXTRA_ECONF:-} )
-
- # Support the Apache2 extras, they must be set globally for all
- # SAPIs to work correctly, especially for external PHP extensions
-
- mkdir -p "${WORKDIR}/sapis-build" || die
- for one_sapi in $SAPIS ; do
- use "${one_sapi}" || continue
- php_set_ini_dir "${one_sapi}"
-
- # The BUILD_DIR variable is used to determine where to output
- # the files that autotools creates. This was all originally
- # based on the autotools-utils eclass.
- BUILD_DIR="${WORKDIR}/sapis-build/${one_sapi}"
- cp -r "${S}" "${BUILD_DIR}" || die
- cd "${BUILD_DIR}" || die
-
- local sapi_conf=(
- --with-config-file-path="${PHP_INI_DIR}"
- --with-config-file-scan-dir="${PHP_EXT_INI_DIR_ACTIVE}"
- )
-
- for sapi in $SAPIS ; do
- case "$sapi" in
- cli|cgi|embed|fpm)
- if [[ "${one_sapi}" == "${sapi}" ]] ; then
- sapi_conf+=( "--enable-${sapi}" )
- else
- sapi_conf+=( "--disable-${sapi}" )
- fi
- ;;
-
- apache2)
- if [[ "${one_sapi}" == "${sapi}" ]] ; then
- sapi_conf+=( --with-apxs2="${EPREFIX}/usr/sbin/apxs" )
- else
- sapi_conf+=( --without-apxs2 )
- fi
- ;;
- esac
- done
-
- # Construct the $myeconfargs array by concatenating $our_conf
- # (the common args) and $sapi_conf (the SAPI-specific args).
- local myeconfargs=( "${our_conf[@]}" )
- myeconfargs+=( "${sapi_conf[@]}" )
-
- pushd "${BUILD_DIR}" > /dev/null || die
- econf "${myeconfargs[@]}"
- popd > /dev/null || die
- done
-}
-
-src_compile() {
- # snmp seems to run during src_compile, too (bug #324739)
- addpredict /usr/share/snmp/mibs/.index
- addpredict /var/lib/net-snmp/mib_indexes
-
- for sapi in ${SAPIS} ; do
- if use "${sapi}"; then
- cd "${WORKDIR}/sapis-build/$sapi" || \
- die "Failed to change dir to ${WORKDIR}/sapis-build/$1"
- emake
- fi
- done
-}
-
-src_install() {
- # see bug #324739 for what happens when we don't have that
- addpredict /usr/share/snmp/mibs/.index
-
- # grab the first SAPI that got built and install common files from there
- local first_sapi=""
- for sapi in $SAPIS ; do
- if use $sapi ; then
- first_sapi=$sapi
- break
- fi
- done
-
- # Makefile forgets to create this before trying to write to it...
- dodir "${PHP_DESTDIR#${EPREFIX}}/bin"
-
- # Install php environment (without any sapis)
- cd "${WORKDIR}/sapis-build/$first_sapi" || die
- emake INSTALL_ROOT="${D}" \
- install-build install-headers install-programs
-
- local extension_dir="$("${ED}/${PHP_DESTDIR#${EPREFIX}}/bin/php-config" --extension-dir)"
-
- # Create the directory where we'll put version-specific php scripts
- keepdir "/usr/share/php${PHP_MV}"
-
- local sapi="", file=""
- local sapi_list=""
-
- for sapi in ${SAPIS}; do
- if use "${sapi}" ; then
- einfo "Installing SAPI: ${sapi}"
- cd "${WORKDIR}/sapis-build/${sapi}" || die
-
- if [[ "${sapi}" == "apache2" ]] ; then
- # We're specifically not using emake install-sapi as libtool
- # may cause unnecessary relink failures (see bug #351266)
- insinto "${PHP_DESTDIR#${EPREFIX}}/apache2/"
- newins ".libs/libphp${PHP_MV}$(get_libname)" \
- "libphp${PHP_MV}$(get_libname)"
- keepdir "/usr/$(get_libdir)/apache2/modules"
- else
- # needed each time, php_install_ini would reset it
- local dest="${PHP_DESTDIR#${EPREFIX}}"
- into "${dest}"
- case "$sapi" in
- cli)
- source="sapi/cli/php"
- ;;
- cgi)
- source="sapi/cgi/php-cgi"
- ;;
- fpm)
- source="sapi/fpm/php-fpm"
- ;;
- embed)
- source="libs/libphp${PHP_MV}$(get_libname)"
- ;;
- *)
- die "unhandled sapi in src_install"
- ;;
- esac
-
- if [[ "${source}" == *"$(get_libname)" ]]; then
- dolib.so "${source}"
- else
- dobin "${source}"
- local name="$(basename ${source})"
- dosym "${dest}/bin/${name}" "/usr/bin/${name}${SLOT}"
- fi
- fi
-
- php_install_ini "${sapi}"
-
- # construct correct SAPI string for php-config
- # thanks to ferringb for the bash voodoo
- if [[ "${sapi}" == "apache2" ]]; then
- sapi_list="${sapi_list:+${sapi_list} }apache2handler"
- else
- sapi_list="${sapi_list:+${sapi_list} }${sapi}"
- fi
- fi
- done
-
- # Installing opcache module
- if use_if_iuse opcache ; then
- dolib.so "modules/opcache$(get_libname)"
- fi
-
- # Install env.d files
- newenvd "${FILESDIR}/20php5-envd" "20php${SLOT}"
- sed -e "s|/lib/|/$(get_libdir)/|g" -i "${ED}/etc/env.d/20php${SLOT}" || die
- sed -e "s|php5|php${SLOT}|g" -i "${ED}/etc/env.d/20php${SLOT}" || die
-
- # set php-config variable correctly (bug #278439)
- sed -e "s:^\(php_sapis=\)\".*\"$:\1\"${sapi_list}\":" -i \
- "${ED}/usr/$(get_libdir)/php${SLOT}/bin/php-config" || die
-
- if use fpm ; then
- if use systemd; then
- systemd_newunit "${FILESDIR}/php-fpm_at.service" \
- "php-fpm@${SLOT}.service"
- else
- systemd_newunit "${FILESDIR}/php-fpm_at-simple.service" \
- "php-fpm@${SLOT}.service"
- fi
- fi
-}
-
-src_test() {
- echo ">>> Test phase [test]: ${CATEGORY}/${PF}"
- PHP_BIN="${WORKDIR}/sapis-build/cli/sapi/cli/php"
- if [[ ! -x "${PHP_BIN}" ]] ; then
- ewarn "Test phase requires USE=cli, skipping"
- return
- else
- export TEST_PHP_EXECUTABLE="${PHP_BIN}"
- fi
-
- if [[ -x "${WORKDIR}/sapis/cgi/php-cgi" ]] ; then
- export TEST_PHP_CGI_EXECUTABLE="${WORKDIR}/sapis/cgi/php-cgi"
- fi
-
- REPORT_EXIT_STATUS=1 "${TEST_PHP_EXECUTABLE}" -n -d \
- "session.save_path=${T}" \
- "${WORKDIR}/sapis-build/cli/run-tests.php" -n -q -d \
- "session.save_path=${T}"
-
- for name in ${EXPECTED_TEST_FAILURES}; do
- mv "${name}.out" "${name}.out.orig" 2>/dev/null || die
- done
-
- local failed="$(find -name '*.out')"
- if [[ ${failed} != "" ]] ; then
- ewarn "The following test cases failed unexpectedly:"
- for name in ${failed}; do
- ewarn " ${name/.out/}"
- done
- else
- einfo "No unexpected test failures, all fine"
- fi
-
- if [[ ${PHP_SHOW_UNEXPECTED_TEST_PASS} == "1" ]] ; then
- local passed=""
- for name in ${EXPECTED_TEST_FAILURES}; do
- [[ -f "${name}.diff" ]] && continue
- passed="${passed} ${name}"
- done
- if [[ ${passed} != "" ]] ; then
- einfo "The following test cases passed unexpectedly:"
- for name in ${passed}; do
- ewarn " ${passed}"
- done
- else
- einfo "None of the known-to-fail tests passed, all fine"
- fi
- fi
-}
-
-pkg_postinst() {
- # Output some general info to the user
- if use apache2 ; then
- APACHE2_MOD_DEFINE="PHP5"
- APACHE2_MOD_CONF="70_mod_php5" # Provided by app-eselect/eselect-php
- apache-module_pkg_postinst
- fi
-
- # Create the symlinks for php
- for m in ${SAPIS}; do
- [[ ${m} == 'embed' ]] && continue;
- if use $m ; then
- local ci=$(eselect php show $m)
- if [[ -z $ci ]]; then
- eselect php set $m php${SLOT} || die
- einfo "Switched ${m} to use php:${SLOT}"
- einfo
- elif [[ $ci != "php${SLOT}" ]] ; then
- elog "To switch $m to use php:${SLOT}, run"
- elog " eselect php set $m php${SLOT}"
- elog
- fi
- fi
- done
-
- elog "Make sure that PHP_TARGETS in ${EPREFIX}/etc/make.conf includes"
- elog "php${SLOT/./-} in order to compile extensions for the ${SLOT} ABI."
- elog
- if ! use readline && use cli ; then
- ewarn "Note that in order to use php interactivly, you need to"
- ewarn "enable the readline USE flag or php -a will hang."
- elog
- fi
- elog "This ebuild installed a version of php.ini based on"
- elog "php.ini-${PHP_INI_VERSION}. You can choose which version of"
- elog "php.ini to install by default by setting PHP_INI_VERSION"
- elog "to either 'production' or 'development' in your make.conf."
- elog "Both versions of php.ini can be found with the PHP docs in"
- elog "${EPREFIX}/usr/share/doc/${PF}"
- elog
- elog "For more details on how minor version slotting works,"
- elog "please see the wiki:"
- elog
- elog " https://wiki.gentoo.org/wiki/PHP"
- elog
-}
-
-pkg_prerm() {
- # This returns "1" on success so we can't "|| die" here.
- eselect php cleanup
-}
+++ /dev/null
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI=5
-
-inherit eutils autotools flag-o-matic versionator depend.apache apache-module libtool systemd
-
-KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd ~x86-freebsd ~amd64-linux ~ia64-linux ~x86-linux ~ppc-macos ~x64-macos ~x86-macos"
-
-function php_get_uri ()
-{
- case "${1}" in
- "php-pre")
- echo "http://downloads.php.net/ab/${2}"
- ;;
- "php")
- echo "http://www.php.net/distributions/${2}"
- ;;
- "olemarkus")
- echo "https://dev.gentoo.org/~olemarkus/php/${2}"
- ;;
- "gentoo")
- echo "mirror://gentoo/${2}"
- ;;
- *)
- die "unhandled case in php_get_uri"
- ;;
- esac
-}
-
-PHP_MV="$(get_major_version)"
-SLOT="$(get_version_component_range 1-2)"
-
-# alias, so we can handle different types of releases (finals, rcs, alphas,
-# betas, ...) w/o changing the whole ebuild
-PHP_PV="${PV/_rc/RC}"
-PHP_PV="${PHP_PV/_alpha/alpha}"
-PHP_PV="${PHP_PV/_beta/beta}"
-PHP_RELEASE="php"
-[[ ${PV} == ${PV/_alpha/} ]] || PHP_RELEASE="php-pre"
-[[ ${PV} == ${PV/_beta/} ]] || PHP_RELEASE="php-pre"
-[[ ${PV} == ${PV/_rc/} ]] || PHP_RELEASE="php-pre"
-PHP_P="${PN}-${PHP_PV}"
-
-PHP_SRC_URI="$(php_get_uri "${PHP_RELEASE}" "${PHP_P}.tar.bz2")"
-
-PHP_FPM_CONF_VER="1"
-
-SRC_URI="${PHP_SRC_URI}"
-
-DESCRIPTION="The PHP language runtime engine: CLI, CGI, FPM/FastCGI, Apache2 and embed SAPIs"
-HOMEPAGE="http://php.net/"
-LICENSE="PHP-3"
-
-S="${WORKDIR}/${PHP_P}"
-
-# We can build the following SAPIs in the given order
-SAPIS="embed cli cgi fpm apache2"
-
-# SAPIs and SAPI-specific USE flags (cli SAPI is default on):
-IUSE="${IUSE}
- ${SAPIS/cli/+cli}
- threads"
-
-IUSE="${IUSE} bcmath berkdb bzip2 calendar cdb cjk
- crypt +ctype curl debug
- enchant exif frontbase +fileinfo +filter firebird
- flatfile ftp gd gdbm gmp +hash +iconv imap inifile
- intl iodbc ipv6 +json kerberos ldap ldap-sasl libedit mhash
- mysql mysqli nls
- oci8-instant-client odbc +opcache pcntl pdo +phar +posix postgres qdbm
- readline recode selinux +session sharedmem
- +simplexml snmp soap sockets spell sqlite ssl
- sysvipc systemd tidy +tokenizer truetype unicode vpx wddx
- +xml xmlreader xmlwriter xmlrpc xpm xslt zip zlib"
-
-DEPEND="
- >=app-eselect/eselect-php-0.7.1-r3[apache2?,fpm?]
- >=dev-libs/libpcre-8.32[unicode]
- apache2? ( || ( >=www-servers/apache-2.4[apache2_modules_unixd,threads=]
- <www-servers/apache-2.4[threads=] ) )"
-
-# The supported (that is, autodetected) versions of BDB are listed in
-# the ./configure script. Other versions *work*, but we need to stick to
-# the ones that can be detected to avoid a repeat of bug #564824.
-DEPEND="${DEPEND}
- berkdb? ( || ( sys-libs/db:5.1
- sys-libs/db:4.8
- sys-libs/db:4.7
- sys-libs/db:4.6
- sys-libs/db:4.5 ) )
- bzip2? ( app-arch/bzip2 )
- cdb? ( || ( dev-db/cdb dev-db/tinycdb ) )
- cjk? ( !gd? (
- virtual/jpeg:0
- media-libs/libpng:0=
- sys-libs/zlib
- ) )
- crypt? ( >=dev-libs/libmcrypt-2.4 )
- curl? ( >=net-misc/curl-7.10.5 )
- enchant? ( app-text/enchant )
- exif? ( !gd? (
- virtual/jpeg:0
- media-libs/libpng:0=
- sys-libs/zlib
- ) )
- firebird? ( dev-db/firebird )
- gd? ( virtual/jpeg:0 media-libs/libpng:0= sys-libs/zlib )
- gdbm? ( >=sys-libs/gdbm-1.8.0 )
- gmp? ( dev-libs/gmp:0 )
- iconv? ( virtual/libiconv )
- imap? ( virtual/imap-c-client[ssl=] )
- intl? ( dev-libs/icu:= )
- iodbc? ( dev-db/libiodbc )
- kerberos? ( virtual/krb5 )
- ldap? ( >=net-nds/openldap-1.2.11 )
- ldap-sasl? ( dev-libs/cyrus-sasl >=net-nds/openldap-1.2.11 )
- libedit? ( || ( sys-freebsd/freebsd-lib dev-libs/libedit ) )
- nls? ( sys-devel/gettext )
- oci8-instant-client? ( dev-db/oracle-instantclient-basic )
- odbc? ( >=dev-db/unixODBC-1.8.13 )
- postgres? ( dev-db/postgresql:* )
- qdbm? ( dev-db/qdbm )
- readline? ( sys-libs/readline:0 )
- recode? ( app-text/recode )
- sharedmem? ( dev-libs/mm )
- simplexml? ( >=dev-libs/libxml2-2.6.8 )
- snmp? ( >=net-analyzer/net-snmp-5.2 )
- soap? ( >=dev-libs/libxml2-2.6.8 )
- spell? ( >=app-text/aspell-0.50 )
- sqlite? ( >=dev-db/sqlite-3.7.6.3 )
- ssl? ( dev-libs/openssl:0 )
- tidy? ( app-text/htmltidy )
- truetype? (
- =media-libs/freetype-2*
- !gd? (
- virtual/jpeg:0 media-libs/libpng:0= sys-libs/zlib )
- )
- unicode? ( dev-libs/oniguruma )
- vpx? ( media-libs/libvpx )
- wddx? ( >=dev-libs/libxml2-2.6.8 )
- xml? ( >=dev-libs/libxml2-2.6.8 )
- xmlrpc? ( >=dev-libs/libxml2-2.6.8 virtual/libiconv )
- xmlreader? ( >=dev-libs/libxml2-2.6.8 )
- xmlwriter? ( >=dev-libs/libxml2-2.6.8 )
- xpm? (
- x11-libs/libXpm
- virtual/jpeg:0
- media-libs/libpng:0= sys-libs/zlib
- )
- xslt? ( dev-libs/libxslt >=dev-libs/libxml2-2.6.8 )
- zip? ( sys-libs/zlib )
- zlib? ( sys-libs/zlib )
- virtual/mta
-"
-
-php="=${CATEGORY}/${PF}"
-
-REQUIRED_USE="
- truetype? ( gd )
- vpx? ( gd )
- cjk? ( gd )
- exif? ( gd )
-
- xpm? ( gd )
- gd? ( zlib )
- simplexml? ( xml )
- soap? ( xml )
- wddx? ( xml )
- xmlrpc? ( || ( xml iconv ) )
- xmlreader? ( xml )
- xslt? ( xml )
- ldap-sasl? ( ldap )
- mhash? ( hash )
- phar? ( hash )
-
- qdbm? ( !gdbm )
- readline? ( !libedit )
- recode? ( !imap !mysqli )
- sharedmem? ( !threads )
-
- mysql? ( || ( mysqli pdo ) )
-
- !cli? ( !cgi? ( !fpm? ( !apache2? ( !embed? ( cli ) ) ) ) )"
-
-RDEPEND="${DEPEND}"
-
-RDEPEND="${RDEPEND}
- fpm? (
- selinux? ( sec-policy/selinux-phpfpm )
- systemd? ( sys-apps/systemd ) )"
-
-DEPEND="${DEPEND}
- sys-devel/flex
- >=sys-devel/m4-1.4.3
- >=sys-devel/libtool-1.5.18"
-
-# Allow users to install production version if they want to
-
-case "${PHP_INI_VERSION}" in
- production|development)
- ;;
- *)
- PHP_INI_VERSION="development"
- ;;
-esac
-
-PHP_INI_UPSTREAM="php.ini-${PHP_INI_VERSION}"
-PHP_INI_FILE="php.ini"
-
-want_apache
-
-pkg_setup() {
- depend.apache_pkg_setup
-}
-
-php_install_ini() {
- local phpsapi="${1}"
-
- # work out where we are installing the ini file
- php_set_ini_dir "${phpsapi}"
-
- local phpinisrc="${PHP_INI_UPSTREAM}-${phpsapi}"
- cp "${PHP_INI_UPSTREAM}" "${phpinisrc}" || die
-
- # default to /tmp for save_path, bug #282768
- sed -e 's|^;session.save_path .*$|session.save_path = "'"${EPREFIX}"'/tmp"|g' -i "${phpinisrc}" || die
-
- # Set the extension dir
- sed -e "s|^extension_dir .*$|extension_dir = ${extension_dir}|g" -i "${phpinisrc}" || die
-
- # Set the include path to point to where we want to find PEAR packages
- sed -e 's|^;include_path = ".:/php/includes".*|include_path = ".:'"${EPREFIX}"'/usr/share/php'${PHP_MV}':'"${EPREFIX}"'/usr/share/php"|' -i "${phpinisrc}" || die
-
- dodir "${PHP_INI_DIR#${EPREFIX}}"
- insinto "${PHP_INI_DIR#${EPREFIX}}"
- newins "${phpinisrc}" "${PHP_INI_FILE}"
-
- elog "Installing php.ini for ${phpsapi} into ${PHP_INI_DIR#${EPREFIX}}"
- elog
-
- dodir "${PHP_EXT_INI_DIR#${EPREFIX}}"
- dodir "${PHP_EXT_INI_DIR_ACTIVE#${EPREFIX}}"
-
- if use_if_iuse opcache; then
- elog "Adding opcache to $PHP_EXT_INI_DIR"
- echo "zend_extension=${PHP_DESTDIR}/$(get_libdir)/opcache.so" >> \
- "${D}/${PHP_EXT_INI_DIR}"/opcache.ini
- dosym "${PHP_EXT_INI_DIR#${EPREFIX}}/opcache.ini" \
- "${PHP_EXT_INI_DIR_ACTIVE#${EPREFIX}}/opcache.ini"
- fi
-
- # SAPI-specific handling
- if [[ "${sapi}" == "fpm" ]] ; then
- einfo "Installing FPM config files php-fpm.conf and www.conf"
- insinto "${PHP_INI_DIR#${EPREFIX}}"
- doins sapi/fpm/php-fpm.conf
- insinto "${PHP_INI_DIR#${EPREFIX}}/fpm.d"
- doins sapi/fpm/www.conf
- fi
-
- dodoc php.ini-development
- dodoc php.ini-production
-}
-
-php_set_ini_dir() {
- PHP_INI_DIR="${EPREFIX}/etc/php/${1}-php${SLOT}"
- PHP_EXT_INI_DIR="${PHP_INI_DIR}/ext"
- PHP_EXT_INI_DIR_ACTIVE="${PHP_INI_DIR}/ext-active"
-}
-
-src_prepare() {
- # Change PHP branding
- # Get the alpha/beta/rc version
- sed -re "s|^(PHP_EXTRA_VERSION=\").*(\")|\1-pl${PR/r/}-gentoo\2|g" \
- -i configure.in || die "Unable to change PHP branding"
-
- # Patch PHP to show Gentoo as the server platform
- sed -e 's/PHP_UNAME=`uname -a | xargs`/PHP_UNAME=`uname -s -n -r -v | xargs`/g' \
- -i configure.in || die "Failed to fix server platform name"
-
- # Patch PHP to support heimdal instead of mit-krb5
- if has_version "app-crypt/heimdal" ; then
- sed -e 's|gssapi_krb5|gssapi|g' -i acinclude.m4 \
- || die "Failed to fix heimdal libname"
- sed -e 's|PHP_ADD_LIBRARY(k5crypto, 1, $1)||g' -i acinclude.m4 \
- || die "Failed to fix heimdal crypt library reference"
- fi
-
- # Add user patches #357637
- epatch_user
-
- # Force rebuilding aclocal.m4
- rm -f aclocal.m4 || die
- eautoreconf
-
- if [[ ${CHOST} == *-darwin* ]] ; then
- # http://bugs.php.net/bug.php?id=48795, bug #343481
- sed -i -e '/BUILD_CGI="\\$(CC)/s/CC/CXX/' configure || die
- fi
-
- # In php-7.x, the FPM pool configuration files have been split off
- # of the main config. By default the pool config files go in
- # e.g. /etc/php-fpm.d, which isn't slotted. So here we move the
- # include directory to a subdirectory "fpm.d" of $PHP_INI_DIR. Later
- # we'll install the pool configuration file "www.conf" there.
- php_set_ini_dir fpm
- sed -i "s~^include=.*$~include=${PHP_INI_DIR}/fpm.d/*.conf~" \
- sapi/fpm/php-fpm.conf.in \
- || die 'failed to move the include directory in php-fpm.conf'
-}
-
-src_configure() {
- addpredict /usr/share/snmp/mibs/.index
- addpredict /var/lib/net-snmp/mib_indexes
-
- PHP_DESTDIR="${EPREFIX}/usr/$(get_libdir)/php${SLOT}"
-
- local our_conf=(
- --prefix="${PHP_DESTDIR}"
- --mandir="${PHP_DESTDIR}/man"
- --infodir="${PHP_DESTDIR}/info"
- --libdir="${PHP_DESTDIR}/lib"
- --with-libdir="$(get_libdir)"
- --without-pear
- $(use_enable threads maintainer-zts)
- )
-
- our_conf+=(
- $(use_enable bcmath bcmath)
- $(use_with bzip2 bz2 "${EPREFIX}/usr")
- $(use_enable calendar calendar)
- $(use_enable ctype ctype)
- $(use_with curl curl "${EPREFIX}/usr")
- $(use_enable xml dom)
- $(use_with enchant enchant "${EPREFIX}/usr")
- $(use_enable exif exif)
- $(use_enable fileinfo fileinfo)
- $(use_enable filter filter)
- $(use_enable ftp ftp)
- $(use_with nls gettext "${EPREFIX}/usr")
- $(use_with gmp gmp "${EPREFIX}/usr")
- $(use_enable hash hash)
- $(use_with mhash mhash "${EPREFIX}/usr")
- $(use_with iconv iconv \
- $(use elibc_glibc || use elibc_musl || echo "${EPREFIX}/usr"))
- $(use_enable intl intl)
- $(use_enable ipv6 ipv6)
- $(use_enable json json)
- $(use_with kerberos kerberos "${EPREFIX}/usr")
- $(use_enable xml libxml)
- $(use_with xml libxml-dir "${EPREFIX}/usr")
- $(use_enable unicode mbstring)
- $(use_with crypt mcrypt "${EPREFIX}/usr")
- $(use_with unicode onig "${EPREFIX}/usr")
- $(use_with ssl openssl "${EPREFIX}/usr")
- $(use_with ssl openssl-dir "${EPREFIX}/usr")
- $(use_enable pcntl pcntl)
- $(use_enable phar phar)
- $(use_enable pdo pdo)
- $(use_enable opcache opcache)
- $(use_with postgres pgsql "${EPREFIX}/usr")
- $(use_enable posix posix)
- $(use_with spell pspell "${EPREFIX}/usr")
- $(use_with recode recode "${EPREFIX}/usr")
- $(use_enable simplexml simplexml)
- $(use_enable sharedmem shmop)
- $(use_with snmp snmp "${EPREFIX}/usr")
- $(use_enable soap soap)
- $(use_enable sockets sockets)
- $(use_with sqlite sqlite3 "${EPREFIX}/usr")
- $(use_enable sysvipc sysvmsg)
- $(use_enable sysvipc sysvsem)
- $(use_enable sysvipc sysvshm)
- $(use_with systemd fpm-systemd)
- $(use_with tidy tidy "${EPREFIX}/usr")
- $(use_enable tokenizer tokenizer)
- $(use_enable wddx wddx)
- $(use_enable xml xml)
- $(use_enable xmlreader xmlreader)
- $(use_enable xmlwriter xmlwriter)
- $(use_with xmlrpc xmlrpc)
- $(use_with xslt xsl "${EPREFIX}/usr")
- $(use_enable zip zip)
- $(use_with zlib zlib "${EPREFIX}/usr")
- $(use_enable debug debug)
- )
-
- # DBA support
- if use cdb || use berkdb || use flatfile || use gdbm || use inifile \
- || use qdbm ; then
- our_conf+=( "--enable-dba${shared}" )
- fi
-
- # DBA drivers support
- our_conf+=(
- $(use_with cdb cdb)
- $(use_with berkdb db4 "${EPREFIX}/usr")
- $(use_enable flatfile flatfile)
- $(use_with gdbm gdbm "${EPREFIX}/usr")
- $(use_enable inifile inifile)
- $(use_with qdbm qdbm "${EPREFIX}/usr")
- )
-
- # Support for the GD graphics library
- our_conf+=(
- $(use_with truetype freetype-dir "${EPREFIX}/usr")
- $(use_enable cjk gd-jis-conv)
- $(use_with gd jpeg-dir "${EPREFIX}/usr")
- $(use_with gd png-dir "${EPREFIX}/usr")
- $(use_with xpm xpm-dir "${EPREFIX}/usr")
- $(use_with vpx vpx-dir "${EPREFIX}/usr")
- )
- # enable gd last, so configure can pick up the previous settings
- our_conf+=( $(use_with gd gd) )
-
- # IMAP support
- if use imap ; then
- our_conf+=(
- $(use_with imap imap "${EPREFIX}/usr")
- $(use_with ssl imap-ssl "${EPREFIX}/usr")
- )
- fi
-
- # Interbase/firebird support
- our_conf+=( $(use_with firebird interbase "${EPREFIX}/usr") )
-
- # LDAP support
- if use ldap ; then
- our_conf+=(
- $(use_with ldap ldap "${EPREFIX}/usr")
- $(use_with ldap-sasl ldap-sasl "${EPREFIX}/usr")
- )
- fi
-
- # MySQL support
- local mysqllib="mysqlnd"
- local mysqlilib="mysqlnd"
-
- our_conf+=( $(use_with mysqli mysqli "${mysqlilib}") )
-
- local mysqlsock="${EPREFIX}/var/run/mysqld/mysqld.sock"
- if use mysql || use mysqli ; then
- our_conf+=( $(use_with mysql mysql-sock "${mysqlsock}") )
- fi
-
- # ODBC support
- our_conf+=(
- $(use_with odbc unixODBC "${EPREFIX}/usr")
- $(use_with iodbc iodbc "${EPREFIX}/usr")
- )
-
- # Oracle support
- our_conf+=( $(use_with oci8-instant-client oci8) )
-
- # PDO support
- if use pdo ; then
- our_conf+=(
- $(use_with mysql pdo-mysql "${mysqllib}")
- $(use_with postgres pdo-pgsql)
- $(use_with sqlite pdo-sqlite "${EPREFIX}/usr")
- $(use_with odbc pdo-odbc "unixODBC,${EPREFIX}/usr")
- $(use_with oci8-instant-client pdo-oci)
- )
- fi
-
- # readline/libedit support
- our_conf+=(
- $(use_with readline readline "${EPREFIX}/usr")
- $(use_with libedit libedit "${EPREFIX}/usr")
- )
-
- # Session support
- if use session ; then
- our_conf+=( $(use_with sharedmem mm "${EPREFIX}/usr") )
- else
- our_conf+=( $(use_enable session session) )
- fi
-
- # Use pic for shared modules such as apache2's mod_php
- our_conf+=( --with-pic )
-
- # we use the system copy of pcre
- # --with-pcre-regex affects ext/pcre
- # --with-pcre-dir affects ext/filter and ext/zip
- our_conf+=(
- --with-pcre-regex="${EPREFIX}/usr"
- --with-pcre-dir="${EPREFIX}/usr"
- )
-
- # Catch CFLAGS problems
- # Fixes bug #14067.
- # Changed order to run it in reverse for bug #32022 and #12021.
- replace-cpu-flags "k6*" "i586"
-
- # Support user-passed configuration parameters
- our_conf+=( ${EXTRA_ECONF:-} )
-
- # Support the Apache2 extras, they must be set globally for all
- # SAPIs to work correctly, especially for external PHP extensions
-
- mkdir -p "${WORKDIR}/sapis-build" || die
- for one_sapi in $SAPIS ; do
- use "${one_sapi}" || continue
- php_set_ini_dir "${one_sapi}"
-
- # The BUILD_DIR variable is used to determine where to output
- # the files that autotools creates. This was all originally
- # based on the autotools-utils eclass.
- BUILD_DIR="${WORKDIR}/sapis-build/${one_sapi}"
- cp -r "${S}" "${BUILD_DIR}" || die
- cd "${BUILD_DIR}" || die
-
- local sapi_conf=(
- --with-config-file-path="${PHP_INI_DIR}"
- --with-config-file-scan-dir="${PHP_EXT_INI_DIR_ACTIVE}"
- )
-
- for sapi in $SAPIS ; do
- case "$sapi" in
- cli|cgi|embed|fpm)
- if [[ "${one_sapi}" == "${sapi}" ]] ; then
- sapi_conf+=( "--enable-${sapi}" )
- else
- sapi_conf+=( "--disable-${sapi}" )
- fi
- ;;
-
- apache2)
- if [[ "${one_sapi}" == "${sapi}" ]] ; then
- sapi_conf+=( --with-apxs2="${EPREFIX}/usr/sbin/apxs" )
- else
- sapi_conf+=( --without-apxs2 )
- fi
- ;;
- esac
- done
-
- # Construct the $myeconfargs array by concatenating $our_conf
- # (the common args) and $sapi_conf (the SAPI-specific args).
- local myeconfargs=( "${our_conf[@]}" )
- myeconfargs+=( "${sapi_conf[@]}" )
-
- pushd "${BUILD_DIR}" > /dev/null || die
- econf "${myeconfargs[@]}"
- popd > /dev/null || die
- done
-}
-
-src_compile() {
- # snmp seems to run during src_compile, too (bug #324739)
- addpredict /usr/share/snmp/mibs/.index
- addpredict /var/lib/net-snmp/mib_indexes
-
- for sapi in ${SAPIS} ; do
- if use "${sapi}"; then
- cd "${WORKDIR}/sapis-build/$sapi" || \
- die "Failed to change dir to ${WORKDIR}/sapis-build/$1"
- emake
- fi
- done
-}
-
-src_install() {
- # see bug #324739 for what happens when we don't have that
- addpredict /usr/share/snmp/mibs/.index
-
- # grab the first SAPI that got built and install common files from there
- local first_sapi=""
- for sapi in $SAPIS ; do
- if use $sapi ; then
- first_sapi=$sapi
- break
- fi
- done
-
- # Makefile forgets to create this before trying to write to it...
- dodir "${PHP_DESTDIR#${EPREFIX}}/bin"
-
- # Install php environment (without any sapis)
- cd "${WORKDIR}/sapis-build/$first_sapi" || die
- emake INSTALL_ROOT="${D}" \
- install-build install-headers install-programs
-
- local extension_dir="$("${ED}/${PHP_DESTDIR#${EPREFIX}}/bin/php-config" --extension-dir)"
-
- # Create the directory where we'll put version-specific php scripts
- keepdir "/usr/share/php${PHP_MV}"
-
- local sapi="", file=""
- local sapi_list=""
-
- for sapi in ${SAPIS}; do
- if use "${sapi}" ; then
- einfo "Installing SAPI: ${sapi}"
- cd "${WORKDIR}/sapis-build/${sapi}" || die
-
- if [[ "${sapi}" == "apache2" ]] ; then
- # We're specifically not using emake install-sapi as libtool
- # may cause unnecessary relink failures (see bug #351266)
- insinto "${PHP_DESTDIR#${EPREFIX}}/apache2/"
- newins ".libs/libphp${PHP_MV}$(get_libname)" \
- "libphp${PHP_MV}$(get_libname)"
- keepdir "/usr/$(get_libdir)/apache2/modules"
- else
- # needed each time, php_install_ini would reset it
- local dest="${PHP_DESTDIR#${EPREFIX}}"
- into "${dest}"
- case "$sapi" in
- cli)
- source="sapi/cli/php"
- ;;
- cgi)
- source="sapi/cgi/php-cgi"
- ;;
- fpm)
- source="sapi/fpm/php-fpm"
- ;;
- embed)
- source="libs/libphp${PHP_MV}$(get_libname)"
- ;;
- *)
- die "unhandled sapi in src_install"
- ;;
- esac
-
- if [[ "${source}" == *"$(get_libname)" ]]; then
- dolib.so "${source}"
- else
- dobin "${source}"
- local name="$(basename ${source})"
- dosym "${dest}/bin/${name}" "/usr/bin/${name}${SLOT}"
- fi
- fi
-
- php_install_ini "${sapi}"
-
- # construct correct SAPI string for php-config
- # thanks to ferringb for the bash voodoo
- if [[ "${sapi}" == "apache2" ]]; then
- sapi_list="${sapi_list:+${sapi_list} }apache2handler"
- else
- sapi_list="${sapi_list:+${sapi_list} }${sapi}"
- fi
- fi
- done
-
- # Installing opcache module
- if use_if_iuse opcache ; then
- dolib.so "modules/opcache$(get_libname)"
- fi
-
- # Install env.d files
- newenvd "${FILESDIR}/20php5-envd" "20php${SLOT}"
- sed -e "s|/lib/|/$(get_libdir)/|g" -i "${ED}/etc/env.d/20php${SLOT}" || die
- sed -e "s|php5|php${SLOT}|g" -i "${ED}/etc/env.d/20php${SLOT}" || die
-
- # set php-config variable correctly (bug #278439)
- sed -e "s:^\(php_sapis=\)\".*\"$:\1\"${sapi_list}\":" -i \
- "${ED}/usr/$(get_libdir)/php${SLOT}/bin/php-config" || die
-
- if use fpm ; then
- if use systemd; then
- systemd_newunit "${FILESDIR}/php-fpm_at.service" \
- "php-fpm@${SLOT}.service"
- else
- systemd_newunit "${FILESDIR}/php-fpm_at-simple.service" \
- "php-fpm@${SLOT}.service"
- fi
- fi
-}
-
-src_test() {
- echo ">>> Test phase [test]: ${CATEGORY}/${PF}"
- PHP_BIN="${WORKDIR}/sapis-build/cli/sapi/cli/php"
- if [[ ! -x "${PHP_BIN}" ]] ; then
- ewarn "Test phase requires USE=cli, skipping"
- return
- else
- export TEST_PHP_EXECUTABLE="${PHP_BIN}"
- fi
-
- if [[ -x "${WORKDIR}/sapis/cgi/php-cgi" ]] ; then
- export TEST_PHP_CGI_EXECUTABLE="${WORKDIR}/sapis/cgi/php-cgi"
- fi
-
- REPORT_EXIT_STATUS=1 "${TEST_PHP_EXECUTABLE}" -n -d \
- "session.save_path=${T}" \
- "${WORKDIR}/sapis-build/cli/run-tests.php" -n -q -d \
- "session.save_path=${T}"
-
- for name in ${EXPECTED_TEST_FAILURES}; do
- mv "${name}.out" "${name}.out.orig" 2>/dev/null || die
- done
-
- local failed="$(find -name '*.out')"
- if [[ ${failed} != "" ]] ; then
- ewarn "The following test cases failed unexpectedly:"
- for name in ${failed}; do
- ewarn " ${name/.out/}"
- done
- else
- einfo "No unexpected test failures, all fine"
- fi
-
- if [[ ${PHP_SHOW_UNEXPECTED_TEST_PASS} == "1" ]] ; then
- local passed=""
- for name in ${EXPECTED_TEST_FAILURES}; do
- [[ -f "${name}.diff" ]] && continue
- passed="${passed} ${name}"
- done
- if [[ ${passed} != "" ]] ; then
- einfo "The following test cases passed unexpectedly:"
- for name in ${passed}; do
- ewarn " ${passed}"
- done
- else
- einfo "None of the known-to-fail tests passed, all fine"
- fi
- fi
-}
-
-pkg_postinst() {
- # Output some general info to the user
- if use apache2 ; then
- APACHE2_MOD_DEFINE="PHP5"
- APACHE2_MOD_CONF="70_mod_php5" # Provided by app-eselect/eselect-php
- apache-module_pkg_postinst
- fi
-
- # Create the symlinks for php
- for m in ${SAPIS}; do
- [[ ${m} == 'embed' ]] && continue;
- if use $m ; then
- local ci=$(eselect php show $m)
- if [[ -z $ci ]]; then
- eselect php set $m php${SLOT} || die
- einfo "Switched ${m} to use php:${SLOT}"
- einfo
- elif [[ $ci != "php${SLOT}" ]] ; then
- elog "To switch $m to use php:${SLOT}, run"
- elog " eselect php set $m php${SLOT}"
- elog
- fi
- fi
- done
-
- elog "Make sure that PHP_TARGETS in ${EPREFIX}/etc/make.conf includes"
- elog "php${SLOT/./-} in order to compile extensions for the ${SLOT} ABI."
- elog
- if ! use readline && use cli ; then
- ewarn "Note that in order to use php interactivly, you need to"
- ewarn "enable the readline USE flag or php -a will hang."
- elog
- fi
- elog "This ebuild installed a version of php.ini based on"
- elog "php.ini-${PHP_INI_VERSION}. You can choose which version of"
- elog "php.ini to install by default by setting PHP_INI_VERSION"
- elog "to either 'production' or 'development' in your make.conf."
- elog "Both versions of php.ini can be found with the PHP docs in"
- elog "${EPREFIX}/usr/share/doc/${PF}"
- elog
- elog "For more details on how minor version slotting works,"
- elog "please see the wiki:"
- elog
- elog " https://wiki.gentoo.org/wiki/PHP"
- elog
-}
-
-pkg_prerm() {
- # This returns "1" on success so we can't "|| die" here.
- eselect php cleanup
-}
projects / gentoo.git / commitdiff