--- /dev/null
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-dialup/fcdsl/fcdsl-2.6.20.7-r1.ebuild,v 1.1 2004/11/20 12:37:06 mrness Exp $
+
+inherit kernel-mod rpm eutils
+
+S="${WORKDIR}/fritz"
+
+DESCRIPTION="AVM FRITZ!Card DSL drivers for 2.6 kernel"
+HOMEPAGE="http://www.avm.de/"
+SRC_URI="ftp://ftp.suse.com/pub/suse/i386/update/9.1/rpm/src/avm_${P/2.6./2.6-}.src.rpm"
+
+LICENSE="LGPL-2"
+SLOT="0"
+KEYWORDS="~x86"
+IUSE=""
+
+RDEPEND=">=net-dialup/capi4k-utils-20040810"
+DEPEND="${RDEPEND}
+ app-arch/rpm2targz
+ sys-apps/gawk
+ sys-apps/sed
+ virtual/linux-sources"
+
+FCDSL_NAMES=("AVM FRITZ!Card DSL" "AVM FRITZ!Card DSL v2.0" "AVM FRITZ!Card DSL SL" "AVM FRITZ!Card DSL USB" "AVM FRITZ!Card DSL SL USB")
+FCDSL_BUSTYPES=("pci" "pci" "pci" "usb" "usb")
+FCDSL_IDS=("1131:5402" "1244:2900" "1244:2700" "057c:2300" "057c:3500")
+FCDSL_FIRMWARES=("fdslbase.bin" "fds2base.bin" "fdssbase.bin" "fdsubase.frm" "fdlubase.frm")
+FCDSL_MODULES=("fcdsl" "fcdsl2" "fcdslsl" "fcdslusb" "fcdslslusb")
+
+detect_fcdsl_card() {
+ PCI_IDS=""
+ USB_IDS=""
+ if [ -d /sys/bus ]; then
+ if [ -d /sys/bus/pci/devices ]; then
+ cd /sys/bus/pci/devices
+ for PCI_DEVICE in *; do
+ PCI_IDS="${PCI_IDS}$(cat ${PCI_DEVICE}/vendor | sed -e 's:0\x::'):$(cat ${PCI_DEVICE}/device | sed -e 's:0\x::') "
+ done
+ unset PCI_DEVICE
+ fi
+ if [ -d /sys/bus/usb/devices ]; then
+ cd /sys/bus/usb/devices
+ for USB_DEVICE in [0-9]*; do
+ if [ -f ${USB_DEVICE}/idVendor ]; then
+ USB_IDS="${USB_IDS}$(cat ${USB_DEVICE}/idVendor):$(cat ${USB_DEVICE}/idProduct) "
+ fi
+ done
+ unset USB_DEVICE
+ fi
+ fi
+
+ FCDSL_MODULE=""
+ for ((CARD=0; CARD < ${#FCDSL_IDS[*]}; CARD++)); do
+ BUS_IDS=""
+ if [ "${FCDSL_BUSTYPES[CARD]}" == "pci" ]; then
+ BUS_IDS="${PCI_IDS}"
+ else
+ BUS_IDS="${USB_IDS}"
+ fi
+ for BUS_ID in ${BUS_IDS}; do
+ if [ "${BUS_ID}" == "${FCDSL_IDS[CARD]}" ]; then
+ einfo "Found: ${FCDSL_NAMES[CARD]}"
+ FCDSL_FIRMWARE=${FCDSL_FIRMWARES[CARD]}
+ FCDSL_MODULE=${FCDSL_MODULES[CARD]}
+ fi
+ done
+ done
+ if [ "${FCDSL_MODULE}" == "" ]; then
+ ewarn "No AVM FRITZ!Card DSL found!"
+ fi
+}
+
+pkg_setup() {
+ if ! kernel-mod_is_2_6_kernel; then
+ die "This package works only with 2.6 kernel!"
+ fi
+ if ! kernel-mod_configoption_present ISDN_CAPI_CAPI20; then
+ die "For using the driver you need a kernel with enabled CAPI support."
+ fi
+ kernel-mod_check_modules_supported
+
+ detect_fcdsl_card
+}
+
+src_unpack() {
+ rpm_src_unpack ${A} || die "Could not unpack RPM package."
+}
+
+src_compile() {
+ unset ARCH
+ if [ "${FCDSL_MODULE}" == "" ]; then
+ for ((CARD=0; CARD < ${#FCDSL_IDS[*]}; CARD++)); do
+ einfo "Compiling driver for ${FCDSL_NAMES[CARD]}"
+ cd ${WORKDIR}/${FCDSL_MODULES[CARD]/fc/fritz.}/src || die "Could not change to ${FCDSL_NAMES[CARD]} source directory."
+ make || die "Could not compile driver for ${FCDSL_NAMES[CARD]}."
+ done
+ else
+ cd ${WORKDIR}/${FCDSL_MODULE/fc/fritz.}/src || die "Could not change to driver source directory."
+ make || die "Could not compile driver."
+ fi
+}
+
+src_install() {
+ dodir /etc/drdsl /etc/modules.d /lib/modules/${KV_VERSION_FULL}/misc /usr/lib/isdn /lib/firmware /usr/sbin
+
+ echo -e "# card\tfile\tproto\tio\tirq\tmem\tcardnr\toptions" >${D}/etc/capi.conf
+ echo "#" >>${D}/etc/capi.conf
+
+ echo "# Options for AVM FRITZ!Card DSL cards" >${D}/etc/modules.d/fcdsl
+ echo "# Correct these settings with the output from drdsl -n" >>${D}/etc/modules.d/fcdsl
+
+ for ((CARD=0; CARD < ${#FCDSL_MODULES[*]}; CARD++)); do
+ echo -e "#${FCDSL_MODULES[CARD]}\t${FCDSL_FIRMWARES[CARD]}\t-\t-\t-\t-\t-" >>${D}/etc/capi.conf
+
+ echo "#options ${FCDSL_MODULES[CARD]} VPI=1 VCI=32 VCC=1" >>${D}/etc/modules.d/fcdsl
+
+ insinto /lib/modules/${KV_VERSION_FULL}/misc
+ doins ${WORKDIR}/${FCDSL_MODULES[CARD]/fc/fritz.}/src/${FCDSL_MODULES[CARD]}.ko
+
+ insinto /lib/firmware
+ newins ${WORKDIR}/${FCDSL_MODULES[CARD]/fc/fritz.}/${FCDSL_FIRMWARES[CARD]} ${PN}_${FCDSL_FIRMWARES[CARD]}
+ dosym /lib/firmware/${PN}_${FCDSL_FIRMWARES[CARD]} /usr/lib/isdn/${FCDSL_FIRMWARES[CARD]}
+ done
+
+ if ! [ "${FCDSL_MODULE}" == "" ]; then
+ sed -si "s/^#\(options ${FCDSL_MODULE} VPI=1 VCI=32 VCC=1\)/\1/" ${D}/etc/modules.d/fcdsl
+ fi
+
+ insinto /etc/drdsl
+ doins ${S}/drdsl.ini
+
+ exeinto /usr/sbin
+ doexe ${S}/drdsl
+
+ dodoc ${S}/CAPI* ${S}/compile* ${S}/license.txt ${S}/release.txt
+ dohtml install_passive-*.html
+
+}
+
+pkg_postinst() {
+ einfo "To complete the installation you have to modify the file"
+ einfo " /etc/modules.d/fcdsl"
+ einfo "with the options drdsl will give you."
+ echo
+ if [ "${FCDSL_MODULE}" == "" ];
+ then
+ einfo "(your modulename)\t(your firmware)\t-\t-\t-\t-\t-"
+ else
+ einfo "${FCDSL_MODULE}\t${FCDSL_FIRMWARE}\t-\t-\t-\t-\t-"
+ fi
+ echo
+ einfo "Please enter following commands:"
+ einfo " depmod -ae"
+ einfo " capiinit start"
+ einfo " drdsl -n"
+ einfo " nano /etc/modules.d/fcdsl (=> enter the values)"
+ einfo " update-modules"
+ echo
+ einfo "If you want to create a peer file, please run:"
+ einfo " ebuild /var/db/pkg/net-dialup/${PF}/${PF}.ebuild config"
+
+ einfo "Checking kernel module dependencies"
+ test -r "${ROOT}/usr/src/linux/System.map" && \
+ depmod -ae -F "${ROOT}/usr/src/linux/System.map" -b "${ROOT}" -r ${KV}
+}
+
+readpassword() {
+
+ VALUE_1=""
+ VALUE_2=""
+ while true; do
+ einfo "Enter your password:"
+ read -r -s VALUE_1
+ einfo "Retype your password:"
+ read -r -s VALUE_2
+ if [ "${VALUE_1}" == "" ]; then
+ echo
+ eerror "You entered a blank password. Please try again."
+ echo
+ else
+ if [ "${VALUE_1}" == "${VALUE_2}" ] ; then
+ break
+ else
+ echo
+ eerror "Your password entries do not match. Please try again."
+ echo
+ fi
+ fi
+ done
+ eval ${1}=${VALUE_1}
+
+ VALUE_1=""
+ VALUE_2=""
+ unset VALUE_1
+ unset VALUE_2
+
+}
+
+readvalue() {
+
+ VALUE=""
+ while true; do
+ einfo "${2}:"
+ read VALUE
+ if [ "${VALUE}" == "" ]; then
+ eerror "You entered a blank value. Please try again."
+ echo
+ else
+ break
+ fi
+ done
+ eval ${1}=${VALUE}
+
+ VALUE=""
+ unset VALUE
+
+}
+
+pkg_config() {
+
+ detect_fcdsl_card
+
+ if [ "${FCDSL_MODULE}" != "" ]; then
+ readvalue FCDSL_PROVIDER "Enter the name of your ISP"
+ if [ ! -e "/etc/ppp/peers/${FCDSL_PROVIDER}" ]; then
+ readvalue FCDSL_USER "Enter your user name"
+ if [ "$(grep "${FCDSL_USER}" /etc/ppp/pap-secrets)" == "" ]; then
+ readpassword FCDSL_PASSWORD
+ echo '"'${FCDSL_USER}'" * "'${FCDSL_PASSWORD}'"' >>/etc/ppp/pap-secrets
+ unset FCDSL_PASSWORD
+ cat <<EOF >>/etc/ppp/peers/${FCDSL_PROVIDER}
+connect ""
+ipcp-accept-remote
+ipcp-accept-local
+usepeerdns
+defaultroute
+user "${FCDSL_USER}"
+hide-password
+sync
+noauth
+lcp-echo-interval 5
+lcp-echo-failure 3
+lcp-max-configure 50
+lcp-max-terminate 2
+noccp
+noipx
+noproxyarp
+mru 1492
+mtu 1492
+linkname "${FCDSL_PROVIDER}"
+ipparam internet
+plugin capiplugin.so
+avmadsl
+:
+/dev/null
+EOF
+ echo
+ echo
+ echo
+ einfo "Now, you can start an ADSL connection with either"
+ einfo " pon \"${FCDSL_PROVIDER}\""
+ einfo "or"
+ einfo " pppd call \"${FCDSL_PROVIDER}\""
+ else
+ ewarn "User \"${FCDSL_USER}\" always exists in \"/etc/ppp/pap-secrets\"!"
+ fi
+ else
+ ewarn "Peer file \"/etc/ppp/peers/${FCDSL_PROVIDER}\" always exists!"
+ fi
+ else
+ ewarn "No AVM FRITZ!Card DSL found!"
+ fi
+ unset FCDSL_PROVIDER
+ unset FCDSL_USER
+
+}
projects / gentoo.git / commitdiff