build dashless "bin-wrappers" directory similar to installed bindir

The new bin-wrappers directory contains wrapper scripts
for executables that will be installed into the standard
bindir.  It explicitly does not contain most dashed-commands.
The scripts automatically set environment variables to run out
of the source tree, not the installed directory.

This will allow running the test suite without dashed commands in
the PATH.  It also provides a simplified way to test run custom
built git executables without installing them first.

bin-wrappers also contains wrappers for some test suite support
executables, where the test suite will soon make use of them.

Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

diff --git a/.gitignore b/.gitignore
index ac02a580daf07150b03194a5a0de522ac1e3415d..5d32289664bbff40f85a450cff7f2261384204b0 100644 (file)
--- a/.gitignore
+++ b/.gitignore
@@ -2,6 +2,7 @@
 /GIT-CFLAGS
 /GIT-GUI-VARS
 /GIT-VERSION-FILE
+/bin-wrappers/
 /git
 /git-add
 /git-add--interactive

diff --git a/Makefile b/Makefile
index 4dba10e7f06d816741697356f402e2a2b5da3dbe..b981364536835e704408cb7ddf76e42ef0183871 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -416,6 +416,15 @@ ALL_PROGRAMS = $(PROGRAMS) $(SCRIPTS)
 # what 'all' will build but not install in gitexecdir
 OTHER_PROGRAMS = git$X
 
+# what test wrappers are needed and 'install' will install, in bindir
+BINDIR_PROGRAMS_NEED_X += git
+BINDIR_PROGRAMS_NEED_X += git-upload-pack
+BINDIR_PROGRAMS_NEED_X += git-receive-pack
+BINDIR_PROGRAMS_NEED_X += git-upload-archive
+BINDIR_PROGRAMS_NEED_X += git-shell
+
+BINDIR_PROGRAMS_NO_X += git-cvsserver
+
 # Set paths to tools early so that they can be used for version tests.
 ifndef SHELL_PATH
        SHELL_PATH = /bin/sh
@@ -1690,19 +1699,30 @@ endif
 
 ### Testing rules
 
-TEST_PROGRAMS += test-chmtime$X
-TEST_PROGRAMS += test-ctype$X
-TEST_PROGRAMS += test-date$X
-TEST_PROGRAMS += test-delta$X
-TEST_PROGRAMS += test-dump-cache-tree$X
-TEST_PROGRAMS += test-genrandom$X
-TEST_PROGRAMS += test-match-trees$X
-TEST_PROGRAMS += test-parse-options$X
-TEST_PROGRAMS += test-path-utils$X
-TEST_PROGRAMS += test-sha1$X
-TEST_PROGRAMS += test-sigchain$X
+TEST_PROGRAMS_NEED_X += test-chmtime
+TEST_PROGRAMS_NEED_X += test-ctype
+TEST_PROGRAMS_NEED_X += test-date
+TEST_PROGRAMS_NEED_X += test-delta
+TEST_PROGRAMS_NEED_X += test-dump-cache-tree
+TEST_PROGRAMS_NEED_X += test-genrandom
+TEST_PROGRAMS_NEED_X += test-match-trees
+TEST_PROGRAMS_NEED_X += test-parse-options
+TEST_PROGRAMS_NEED_X += test-path-utils
+TEST_PROGRAMS_NEED_X += test-sha1
+TEST_PROGRAMS_NEED_X += test-sigchain
+
+TEST_PROGRAMS = $(patsubst %,%$X,$(TEST_PROGRAMS_NEED_X))
 
-all:: $(TEST_PROGRAMS)
+test_bindir_programs := $(patsubst %,bin-wrappers/%,$(BINDIR_PROGRAMS_NEED_X) $(BINDIR_PROGRAMS_NO_X) $(TEST_PROGRAMS_NEED_X))
+
+all:: $(TEST_PROGRAMS) $(test_bindir_programs)
+
+bin-wrappers/%: wrap-for-bin.sh
+       @mkdir -p bin-wrappers
+       $(QUIET_GEN)sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \
+            -e 's|@@BUILD_DIR@@|$(shell pwd)|' \
+            -e 's|@@PROG@@|$(@F)|' < $< > $@ && \
+       chmod +x $@
 
 # GNU make supports exporting all variables by "export" without parameters.
 # However, the environment gets quite big, and some programs have problems
@@ -1763,11 +1783,13 @@ endif
 gitexec_instdir_SQ = $(subst ','\'',$(gitexec_instdir))
 export gitexec_instdir
 
+install_bindir_programs := $(patsubst %,%$X,$(BINDIR_PROGRAMS_NEED_X)) $(BINDIR_PROGRAMS_NO_X)
+
 install: all
        $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(bindir_SQ)'
        $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(gitexec_instdir_SQ)'
        $(INSTALL) $(ALL_PROGRAMS) '$(DESTDIR_SQ)$(gitexec_instdir_SQ)'
-       $(INSTALL) git$X git-upload-pack$X git-receive-pack$X git-upload-archive$X git-shell$X git-cvsserver '$(DESTDIR_SQ)$(bindir_SQ)'
+       $(INSTALL) $(install_bindir_programs) '$(DESTDIR_SQ)$(bindir_SQ)'
        $(MAKE) -C templates DESTDIR='$(DESTDIR_SQ)' install
 ifndef NO_PERL
        $(MAKE) -C perl prefix='$(prefix_SQ)' DESTDIR='$(DESTDIR_SQ)' install
@@ -1878,6 +1900,7 @@ clean:
                $(LIB_FILE) $(XDIFF_LIB)
        $(RM) $(ALL_PROGRAMS) $(BUILT_INS) git$X
        $(RM) $(TEST_PROGRAMS)
+       $(RM) -r bin-wrappers
        $(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo common-cmds.h TAGS tags cscope*
        $(RM) -r autom4te.cache
        $(RM) config.log config.mak.autogen config.mak.append config.status config.cache

diff --git a/wrap-for-bin.sh b/wrap-for-bin.sh
new file mode 100644 (file)
index 0000000..c5075c9
--- /dev/null
+++ b/wrap-for-bin.sh
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+# wrap-for-bin.sh: Template for git executable wrapper scripts
+# to run test suite against sandbox, but with only bindir-installed
+# executables in PATH.  The Makefile copies this into various
+# files in bin-wrappers, substituting
+# @@BUILD_DIR@@ and @@PROG@@.
+
+GIT_EXEC_PATH='@@BUILD_DIR@@'
+GIT_TEMPLATE_DIR='@@BUILD_DIR@@/templates/blt'
+GITPERLLIB='@@BUILD_DIR@@/perl/blib/lib'
+PATH='@@BUILD_DIR@@/bin-wrappers:'"$PATH"
+export GIT_EXEC_PATH GIT_TEMPLATE_DIR GITPERLLIB PATH
+
+exec "${GIT_EXEC_PATH}/@@PROG@@" "$@"