MD5 c5e955ffa18f2f4526a67c00dbe8b870 files/05-udev-early.rules-079 385
RMD160 04de1f937d47a2d42eeec879851a1a00d847cecc files/05-udev-early.rules-079 385
SHA256 c50db994a4a40d6b7aa466944c2ab14a00a6269a2b9f0ae26b1049cf6881b682 files/05-udev-early.rules-079 385
+AUX 05-udev-early.rules-104 449 RMD160 8c10d29743ad7e5f68816a9a8807fe5a795b6505 SHA1 ac3b0b510261b1a3524c563a1ba3b84662cb7194 SHA256 4389d9de4eb5c847c0d0a7c0187d88c2030d62e1b629e8b62a8fe9a53272ea84
+MD5 448a45be21329c2d61408f6f7efb2ed3 files/05-udev-early.rules-104 449
+RMD160 8c10d29743ad7e5f68816a9a8807fe5a795b6505 files/05-udev-early.rules-104 449
+SHA256 4389d9de4eb5c847c0d0a7c0187d88c2030d62e1b629e8b62a8fe9a53272ea84 files/05-udev-early.rules-104 449
AUX 40-scsi-hotplug.rules 338 RMD160 43039de65d94b23ea2e3842d48987c74c5788f20 SHA1 588916e77490f6d8915dc23d265afd3f9096d3e2 SHA256 7e7867e1dbc889846e26f20870e2c9a685872f3dabdf6c8ac0911837857eac86
MD5 ba9e173c0295e66741c7baec47fe2ae8 files/40-scsi-hotplug.rules 338
RMD160 43039de65d94b23ea2e3842d48987c74c5788f20 files/40-scsi-hotplug.rules 338
MD5 a631d9d668f8143b10e5c71f8b5d57d3 files/udev.rules-103-r3 9666
RMD160 1435925f11e525aa2085679ba8e39ca637069fb5 files/udev.rules-103-r3 9666
SHA256 4de595e2bc92e874ad18de3bc30157cca3f7d5b93155a5c99d9c8b5e57613bc1 files/udev.rules-103-r3 9666
+AUX udev.rules-104 10799 RMD160 d3d158e92f71215b2b847f480b23650b4873e7e3 SHA1 e66b6984058d2271a35f452e8a92febb81388f25 SHA256 5265c20933afefa05f3033375fcc538dcc3699b58d44e21f81320c7a434212cd
+MD5 69437fb27fe4e3894b551a73b34a5d0c files/udev.rules-104 10799
+RMD160 d3d158e92f71215b2b847f480b23650b4873e7e3 files/udev.rules-104 10799
+SHA256 5265c20933afefa05f3033375fcc538dcc3699b58d44e21f81320c7a434212cd files/udev.rules-104 10799
AUX udev.rules.post_012 4184 RMD160 0fa81b4bafa732497b8e65cf658adf2cf32f3a0a SHA1 12300249d33f01c4fd1a8708a4733dafddb90ffe SHA256 3fc8785c40acb43d92a2f7b3c4e21cfa7b947fb5d2e87d1c109297ff34994100
MD5 7f23fbfcba51c7c4b8c29a8c08429996 files/udev.rules.post_012 4184
RMD160 0fa81b4bafa732497b8e65cf658adf2cf32f3a0a files/udev.rules.post_012 4184
DIST udev-099.tar.bz2 197429 RMD160 c323d1f63010d70470872f8b9710cf9ed179643d SHA1 811bdc648704bc3b9f296a086ce4b7708d69c2ec SHA256 58a18e38ce9f28886b5b67784cff58ebb96a912bd32d6c32760e189881853bfa
DIST udev-100.tar.bz2 197628 RMD160 110903eda55348131ca412c4f4a9d539e5a35bdb SHA1 9c7cdca01db5e842761b2578fc59ab86b8609bb0 SHA256 ca1f83735bd9fc70b534c846e4214394f0297f6a32d1d9252e08ad796d0d94b6
DIST udev-103.tar.bz2 200027 RMD160 3b00a83ad8c538109ee030e2e471422272c7d071 SHA1 015372f585beeba05217ad6568178820b2713571 SHA256 047f5e2895f707117ab726cedd89fd35e8c9105530af54a8038fe81cf61c4e3f
+DIST udev-104.tar.bz2 187574 RMD160 269aeb9a0b2043d18c274fde749d2e0d30398b73 SHA1 53a8019f2be429be914e0283bfbcb91083fbbd9a SHA256 ec0e7bd0c322dce6149d5f94185aa477659f5030a3d684ff5428124eca684ea1
EBUILD udev-079-r2.ebuild 7523 RMD160 bc3a75a2205cbe092ec431eaf474cb1f4959d4fe SHA1 b10bb23e64edc1a43b890f06c3f71a4e7c85ba9e SHA256 14a34689b36d1be9ffd953eedf20ee906b8638b0967b7148b4d0023d765da90f
MD5 3a6af6ceddbbd1a93002a240a8e6b930 udev-079-r2.ebuild 7523
RMD160 bc3a75a2205cbe092ec431eaf474cb1f4959d4fe udev-079-r2.ebuild 7523
MD5 740ea843e67f766c34a4b13feb82d9de udev-103.ebuild 11287
RMD160 bff5f34ad8de812ef7a13612b059ecb14da37421 udev-103.ebuild 11287
SHA256 f650d8df92004190e77a7d96ed437cbaee53fc2504858e63491d417854444c9b udev-103.ebuild 11287
-MISC ChangeLog 40416 RMD160 2c26b802cbe00564d6021eabb7d58aaf0ef69f5a SHA1 945bc3beb461a192899a3a9172b0e76767d4f214 SHA256 f23315f98eff52faf54accb4eee341c2888ecd8bd9b202a0f62c5fc910bfc360
-MD5 c89a91cfc5fdae4d8e2f9dae7a33a9bb ChangeLog 40416
-RMD160 2c26b802cbe00564d6021eabb7d58aaf0ef69f5a ChangeLog 40416
-SHA256 f23315f98eff52faf54accb4eee341c2888ecd8bd9b202a0f62c5fc910bfc360 ChangeLog 40416
+EBUILD udev-104.ebuild 11586 RMD160 ed25ad6cca9210449692df71ea15fa32e4a056b0 SHA1 a16a692f816c598613124343ff781e210f6cb1a4 SHA256 25ba578398480720394cc7aa2082cb36971a52c4c51ce25dd7f09e2045b33531
+MD5 700e0b32b06653e6b719413574629586 udev-104.ebuild 11586
+RMD160 ed25ad6cca9210449692df71ea15fa32e4a056b0 udev-104.ebuild 11586
+SHA256 25ba578398480720394cc7aa2082cb36971a52c4c51ce25dd7f09e2045b33531 udev-104.ebuild 11586
+MISC ChangeLog 41183 RMD160 ab8fbf52b57003f40127182826186602d8a7556f SHA1 d144f2b5f8bc51d07030b31567d216e4bb1259b8 SHA256 d60f97ae6e3421c9b5d9725146c0d59a2adb1fa391af883c7df704dafc531897
+MD5 bc85c4ebbe3516e4c6b45a774463d9bf ChangeLog 41183
+RMD160 ab8fbf52b57003f40127182826186602d8a7556f ChangeLog 41183
+SHA256 d60f97ae6e3421c9b5d9725146c0d59a2adb1fa391af883c7df704dafc531897 ChangeLog 41183
MISC metadata.xml 447 RMD160 d1ba09bd6a434b25c718673de9258cc544e090be SHA1 70c43d2863c09958849bfce8c5bb97d406a0662b SHA256 a9881de1424ac71191111bd30c7c1253589673b0cdce13c352204f1499e9d884
MD5 f74bee0505505c00e76da6313db29e49 metadata.xml 447
RMD160 d1ba09bd6a434b25c718673de9258cc544e090be metadata.xml 447
MD5 0a038fef39f2c8ccb4a613719e0f817b files/digest-udev-103-r3 229
RMD160 fd217b32f070097ae37ba5ee5a96a84faab5edef files/digest-udev-103-r3 229
SHA256 7638db47ed884246551e3d27d9be0fd088c0db9a7e92c3359efa901a87742a28 files/digest-udev-103-r3 229
+MD5 834e944e237e0d9501aac75e61c50eb1 files/digest-udev-104 229
+RMD160 7fd47bd560da91a9953657f31d6cd2383d2032cb files/digest-udev-104 229
+SHA256 36aae1151cda7c7f51bfb8204b7cef8301f80ea336086802f1a8c495a7eb7749 files/digest-udev-104 229
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.1 (GNU/Linux)
-iD8DBQFFrQIst2vP6XvVdOcRArF1AJ9F/mOV1fWU2Jirp8n3LS17Y+YZRgCfXBw5
-EBSf1cSzLeEDfqI1Gp2Jueg=
-=eHaQ
+iD8DBQFFsOT0t2vP6XvVdOcRAsQfAJ0VVLcnSBl6BYWqcH9UeFRDBMpYDgCg0vxD
+e+8Jwryd7ZxnJDRfAeX+dpQ=
+=NY/W
-----END PGP SIGNATURE-----
--- /dev/null
+# /etc/udev/rules/50-udev.rules: device naming rules for udev
+#
+# Gentoo specific rules
+#
+# There are a number of modifiers that are allowed to be used in some of the
+# fields. See the udev man page for a full description of them.
+#
+# Try not to modify this file, if you wish to change things, create a new rule
+# file that can be run before this one.
+#
+
+
+# console
+KERNEL=="pty[pqrstuvwxyzabcdef][0123456789abcdef]", NAME="%k", GROUP="tty", OPTIONS="last_rule"
+KERNEL=="tty[pqrstuvwxyzabcdef][0123456789abcdef]", NAME="%k", GROUP="tty", OPTIONS="last_rule"
+KERNEL=="vcs*", NAME="%k", GROUP="tty", OPTIONS="last_rule"
+KERNEL=="vcsa*", NAME="%k", GROUP="tty", OPTIONS="last_rule"
+KERNEL=="tty", NAME="%k", GROUP="tty", MODE="0666", OPTIONS="last_rule"
+KERNEL=="tty[0-9]", NAME="%k", GROUP="tty", OPTIONS="last_rule"
+KERNEL=="tty[0-9][0-9]", NAME="%k", GROUP="tty", OPTIONS="last_rule"
+KERNEL=="console", NAME="%k", GROUP="tty", MODE="0600"
+KERNEL=="ptmx", NAME="%k", GROUP="tty", MODE="0666"
+
+# tty devices
+KERNEL=="ttyS[0-9]*", NAME="%k", SYMLINK="tts/%n", GROUP="tty"
+KERNEL=="ttyUSB[0-9]*", NAME="%k", SYMLINK="tts/USB%n", GROUP="tty", MODE="0660"
+KERNEL=="ippp0", NAME="%k", GROUP="tty"
+KERNEL=="isdn*" NAME="%k", GROUP="tty"
+KERNEL=="dcbri*", NAME="%k", GROUP="tty"
+KERNEL=="ircomm*", NAME="%k", GROUP="tty"
+
+# all block devices
+SUBSYSTEM=="block", GROUP="disk"
+
+# cdrom symlinks and other good cdrom naming
+KERNEL=="sr[0-9]*|hd[a-z]|pcd[0-9]*", ACTION=="add", IMPORT{program}="cdrom_id --export $tempnode"
+
+ENV{ID_CDROM}=="?*", GROUP="cdrom"
+BUS=="scsi", KERNEL=="sg[0-9]*", ACTION=="add", DRIVERS=="sr", GROUP="cdrom"
+
+# disk devices
+KERNEL=="sd*", NAME="%k", GROUP="disk"
+KERNEL=="dasd*", NAME="%k", GROUP="disk"
+KERNEL=="ataraid*", NAME="%k", GROUP="disk"
+
+# compaq smart array
+KERNEL=="cciss*", NAME="%k"
+KERNEL=="ida*", NAME="%k"
+
+# mylex
+KERNEL=="rd*", NAME="%k"
+
+# dri devices
+KERNEL=="card*", NAME="dri/card%n", GROUP="video"
+KERNEL=="nvidia*", NAME="%k", GROUP="video"
+KERNEL=="3dfx*", NAME="%k", GROUP="video"
+
+# alsa devices
+SUBSYSTEM=="sound", GROUP="audio"
+KERNEL=="controlC[0-9]*", NAME="snd/%k"
+KERNEL=="hw[CD0-9]*", NAME="snd/%k"
+KERNEL=="pcm[CD0-9cp]*", NAME="snd/%k"
+KERNEL=="midiC[D0-9]*", NAME="snd/%k"
+KERNEL=="timer", NAME="snd/%k"
+KERNEL=="seq", NAME="snd/%k"
+
+# capi devices
+KERNEL=="capi", NAME="capi20", SYMLINK+="isdn/capi20", GROUP="dialout"
+KERNEL=="capi*", NAME="capi/%n", GROUP="dialout"
+
+# cpu devices
+KERNEL=="cpu[0-9]*", NAME="cpu/%n/cpuid"
+KERNEL=="msr[0-9]*", NAME="cpu/%n/msr"
+KERNEL=="microcode", NAME="cpu/microcode"
+
+# dm devices (ignore them)
+KERNEL=="dm-[0-9]*", OPTIONS="ignore_device"
+# create a symlink named after the device map name
+# note devmap_name comes with extras/multipath
+#KERNEL=="dm-[0-9]*", PROGRAM="/sbin/devmap_name %M %m", NAME="%k", SYMLINK+="%c"
+KERNEL=="device-mapper", NAME="mapper/control"
+
+# fb devices
+KERNEL=="fb[0-9]*", NAME="fb/%n", SYMLINK+="%k", GROUP="video"
+
+# floppy devices
+KERNEL=="fd[0-9]*", NAME="floppy/%n", SYMLINK+="%k", GROUP="floppy"
+
+# i2c devices
+KERNEL=="i2c-[0-9]*", NAME="i2c/%n", SYMLINK+="%k"
+
+# input devices
+KERNEL=="mice", NAME="input/%k", MODE="0644"
+KERNEL=="mouse*", NAME="input/%k", MODE="0644"
+KERNEL=="event*", NAME="input/%k", MODE="0600"
+KERNEL=="js*", NAME="input/%k", MODE="664"
+KERNEL=="ts*", NAME="input/%k", MODE="0600"
+
+# loop devices
+KERNEL=="loop[0-9]*", NAME="loop/%n", SYMLINK+="%k", GROUP="disk"
+
+# md block devices
+KERNEL=="md[0-9]*", NAME="md/%n", SYMLINK+="%k", GROUP="disk"
+
+# aoe char devices,
+SUBSYSTEM=="aoe", KERNEL=="discover", NAME="etherd/%k", GROUP="disk", MODE="0220"
+SUBSYSTEM=="aoe", KERNEL=="err", NAME="etherd/%k", GROUP="disk", MODE="0440"
+SUBSYSTEM=="aoe", KERNEL=="interfaces", NAME="etherd/%k", GROUP="disk", MODE="0220"
+
+# misc devices
+KERNEL=="agpgart", NAME="misc/%k", SYMLINK+="%k"
+KERNEL=="psaux", NAME="misc/%k", SYMLINK+="%k"
+KERNEL=="rtc", NAME="misc/%k", SYMLINK+="%k", MODE="0664"
+KERNEL=="uinput", NAME="misc/%k", SYMLINK+="%k"
+KERNEL=="inotify", NAME="misc/%k", SYMLINK+="%k", MODE="0666"
+
+# netlink devices
+KERNEL=="route", NAME="netlink/%k"
+KERNEL=="skip", NAME="netlink/%k"
+KERNEL=="usersock", NAME="netlink/%k"
+KERNEL=="fwmonitor", NAME="netlink/%k"
+KERNEL=="tcpdiag", NAME="netlink/%k"
+KERNEL=="nflog", NAME="netlink/%k"
+KERNEL=="xfrm", NAME="netlink/%k"
+KERNEL=="arpd", NAME="netlink/%k"
+KERNEL=="route6", NAME="netlink/%k"
+KERNEL=="ip6_fw", NAME="netlink/%k"
+KERNEL=="dnrtmsg", NAME="netlink/%k"
+KERNEL=="tap*", NAME="netlink/%k"
+
+# network devices
+KERNEL=="tun", NAME="net/%k", MODE="0600"
+
+# ramdisk devices
+KERNEL=="ram[0-9]*", NAME="rd/%n", SYMLINK+="%k"
+
+# IEEE1394 (firewire) devices (must be before raw devices below)
+KERNEL=="raw1394", NAME="%k", GROUP="video"
+KERNEL=="dv1394*", NAME="dv1394/%n", GROUP="video"
+KERNEL=="video1394*", NAME="video1394/%n", GROUP="video"
+
+# raw devices
+KERNEL=="raw[0-9]*", NAME="raw/%k", GROUP="disk"
+KERNEL=="ram*", NAME="%k", GROUP="disk"
+
+# sound devices
+KERNEL=="adsp", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="adsp[0-9]*", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="audio", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="audio[0-9]*", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="dsp", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="dsp[0-9]*", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="mixer", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="mixer[0-9]*", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="sequencer", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="sequencer[0-9]*", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+
+# memory devices
+KERNEL=="random", NAME="%k", MODE="0666"
+KERNEL=="urandom", NAME="%k", MODE="0444"
+KERNEL=="mem", NAME="%k", MODE="0640"
+KERNEL=="kmem", NAME="%k", MODE="0640"
+KERNEL=="port", NAME="%k", MODE="0640"
+KERNEL=="full", NAME="%k", MODE="0666"
+KERNEL=="null", NAME="%k", MODE="0666"
+KERNEL=="zero", NAME="%k", MODE="0666"
+
+# usb devices
+KERNEL=="hiddev*", NAME="usb/%k"
+KERNEL=="auer*", NAME="usb/%k"
+KERNEL=="legousbtower*", NAME="usb/%k", GROUP="usb"
+KERNEL=="dabusb*", NAME="usb/%k"
+BUS=="usb", KERNEL=="lp[0-9]*", NAME="usb/%k", GROUP="lp"
+
+# v4l devices
+KERNEL=="video[0-9]*", NAME="v4l/video%n", SYMLINK+="video%n", GROUP="video"
+KERNEL=="radio[0-9]*", NAME="v4l/radio%n", SYMLINK+="radio%n", GROUP="video"
+KERNEL=="vbi[0-9]*", NAME="v4l/vbi%n", SYMLINK+="vbi%n", GROUP="video"
+KERNEL=="vtx[0-9]*", NAME="v4l/vtx%n", GROUP="video"
+
+# dvb devices
+SUBSYSTEM=="dvb", PROGRAM="/bin/sh -c 'K=%k; K=$${K#dvb}; printf dvb/adapter%%i/%%s $${K%%%%.*} $${K#*.}'", NAME="%c", GROUP="video"
+
+# Asterisk Zaptel devices
+KERNEL=="zapctl", NAME="zap/ctl"
+KERNEL=="zaptimer", NAME="zap/timer"
+KERNEL=="zapchannel", NAME="zap/channel"
+KERNEL=="zappseudo", NAME="zap/pseudo"
+KERNEL=="zap[0-9]*", NAME="zap/%n"
+
+# pilot/palm devices
+KERNEL=="pilot", NAME="%k", GROUP="uucp"
+
+# jaz devices
+KERNEL=="jaz*", NAME="%k", GROUP="disk"
+
+# zip devices
+KERNEL=="pocketzip*", NAME="%k", GROUP="disk"
+KERNEL=="zip*", NAME="%k", GROUP="disk"
+
+# ls120 devices
+KERNEL=="ls120", NAME="%k", GROUP="disk"
+
+# lp devices
+KERNEL=="lp*", NAME="%k", GROUP="lp"
+KERNEL=="irlpt", NAME="%k", GROUP="lp"
+KERNEL=="usblp", NAME="%k", GROUP="lp"
+KERNEL=="lp*", NAME="%k", GROUP="lp"
+KERNEL=="parport*", NAME="%k", GROUP="lp"
+
+# tape devices
+KERNEL=="ht*", NAME="%k", GROUP="tape"
+KERNEL=="nht*", NAME="%k", GROUP="tape"
+KERNEL=="pt*", NAME="%k", GROUP="tape"
+KERNEL=="npt*", NAME="%k", GROUP="tape"
+KERNEL=="st*", NAME="%k", GROUP="tape"
+KERNEL=="nst*", NAME="%k", GROUP="tape"
+KERNEL=="osst*", NAME="%k", GROUP="tape"
+KERNEL=="nosst*", NAME="%k", GROUP="tape"
+
+# diskonkey devices
+KERNEL=="diskonkey*", NAME="%k", GROUP="disk"
+
+# rem_ide devices
+KERNEL=="microdrive*", NAME="%k", GROUP="disk"
+
+# kbd devices
+KERNEL=="kbd", NAME="%k", MODE="0664"
+
+# Sony Vaio Jogdial sonypi device
+KERNEL=="sonypi", NAME="%k", MODE="0666"
+
+# packet devices
+KERNEL=="pktcdvd", NAME="pktcdvd/control", GROUP="cdrw", MODE="0660"
+KERNEL=="pktcdvd[0-9]*", NAME="pktcdvd/pktcdvd%n", GROUP="cdrw", MODE="0660"
+
+# infiniband devices
+KERNEL=="umad*", NAME="infiniband/%k"
+KERNEL=="issm*", NAME="infiniband/%k"
+
+
+# usbfs-like device nodes
+SUBSYSTEM=="usb_device", PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev}; printf bus/usb/%%03i/%%03i $${K%%%%.*} $${K#*.}'", NAME="%c", GROUP="usb", MODE="0664"
+
+
+# Module autoloading
+
+# Autoload modules that lack aliases but have them defined inutoload modules
+SYSFS{modalias}=="?*", ACTION=="add", RUN+="/sbin/modprobe $env{MODALIAS}"
+
+# /etc/modprobe.conf.
+SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", RUN+="/bin/sh -c 'while read id; do /sbin/modprobe pnp:d$$id; done < /sys$devpath/id'"
+# If you have problems with some pnp modules being loaded, please enter the
+# following aliases into the modprobe configuration files. These are needed by
+# udev to autoload some modules
+# alias pnp:dPNP0510 irtty-sir
+# alias pnp:dPNP0511 irtty-sir
+# alias pnp:dPNP0700 floppy
+# alias pnp:dPNP0800 pcspkr
+# alias pnp:dPNP0b00 rtc
+# alias pnp:dPNP0303 atkbd
+# alias pnp:dPNP0f13 psmouse
+# alias pnp:dPNPb02f analog
+
+
+# Parts taken from redhat-rules
+# sd: 0 TYPE_DISK, 7 TYPE_MOD, 14 TYPE_RBC
+# sr: 4 TYPE_WORM, 5 TYPE_ROM
+# st/osst: 1 TYPE_TAPE
+
+# Setting timeout for tape-devices to 900 seconds
+# if you need timeouts for other devices add a similar rule
+# with correct type-value, or open a bug on bugs.gentoo.org.
+ACTION=="add", SUBSYSTEM=="scsi" , ATTRS{type}=="1", \
+ RUN+="/bin/sh -c 'echo 900 > /sys$$DEVPATH/timeout'"
+
+# Load driver scsi-device
+ACTION=="add", SUBSYSTEM=="scsi_device", RUN+="/sbin/modprobe sg"
+ACTION=="add", SUBSYSTEM=="scsi_device", ATTRS{type}=="0|7|14", \
+ RUN+="/sbin/modprobe sd_mod"
+ACTION=="add", SUBSYSTEM=="scsi_device", ATTRS{type}=="4|5", \
+ RUN+="/sbin/modprobe sr_mod"
+ACTION=="add", SUBSYSTEM=="scsi_device", ATTRS{type}=="1", \
+ RUN+="/sbin/modprobe st"
+
+ACTION=="add", SUBSYSTEM=="scsi_device", ATTRS{type}=="1", ENV{ID_SCSI_TAPE_DRIVER}="st"
+ACTION=="add", SUBSYSTEM=="scsi_device", ATTRS{type}=="1", ATTRS{vendor}=="On[sS]tream", \
+ ATTRS{model}!="ADR*", ENV{ID_SCSI_TAPE_DRIVER}="osst"
+ENV{ID_SCSI_TAPE_DRIVER}=="?*", RUN+="/sbin/modprobe $env{ID_SCSI_TAPE_DRIVER}"
+
+
+# Load firmware
+SUBSYSTEM=="firmware", ACTION=="add", RUN+="firmware.sh"
+
+
+# be backward compatible for a while with the /etc/dev.d and /etc/hotplug.d/ systems
+# run /etc/hotplug.d/ stuff only if we came from a hotplug event, not for udevstart
+#ENV{UDEVD_EVENT}=="1", RUN+="udev_run_hotplugd $env{SUBSYSTEM}"
+
+# always run /etc/dev.d/ stuff for now.
+RUN+="udev_run_devd $env{SUBSYSTEM}"
+
+# debugging monitor
+RUN+="socket:/org/kernel/udev/monitor"
--- /dev/null
+# Copyright 1999-2007 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/udev/udev-104.ebuild,v 1.1 2007/01/19 15:34:01 zzam Exp $
+
+inherit eutils flag-o-matic multilib
+
+DESCRIPTION="Linux dynamic and persistent device naming support (aka userspace devfs)"
+HOMEPAGE="http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html"
+SRC_URI="mirror://kernel/linux/utils/kernel/hotplug/${P}.tar.bz2"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86"
+IUSE="selinux"
+
+# still rely on hotplug (need to fix that), but now we implement coldplug
+
+DEPEND="sys-apps/hotplug-base
+ selinux? ( sys-libs/libselinux )"
+RDEPEND="!sys-apps/coldplug"
+RDEPEND="${DEPEND} ${RDEPEND}
+ >=sys-apps/baselayout-1.11.14"
+# We need the lib/rcscripts/addon support
+PROVIDE="virtual/dev-manager"
+
+src_unpack() {
+ unpack ${A}
+
+ cd "${S}"
+
+ # patches go here...
+ #epatch ${FILESDIR}/${P}-udev_volume_id.patch
+
+ # No need to clutter the logs ...
+ sed -ie '/^DEBUG/ c\DEBUG = false' Makefile
+ # Do not use optimization flags from the package
+ sed -ie 's|$(OPTIMIZATION)||g' Makefile
+
+ # Make sure there is no sudden changes to udev.rules.gentoo
+ # (more for my own needs than anything else ...)
+ MD5=`md5sum < "${S}/etc/udev/gentoo/udev.rules"`
+ MD5=${MD5/ -/}
+ if [ "${MD5}" != "295a9b7bdc8bdb239f8860d14af761b0" ]
+ then
+ echo
+ eerror "gentoo/udev.rules has been updated, please validate!"
+ die "gentoo/udev.rules has been updated, please validate!"
+ fi
+}
+
+src_compile() {
+ filter-flags -fprefetch-loop-arrays
+ local myconf=
+ local extras="extras/ata_id \
+ extras/cdrom_id \
+ extras/dasd_id \
+ extras/edd_id \
+ extras/firmware \
+ extras/floppy \
+ extras/path_id \
+ extras/run_directory \
+ extras/scsi_id \
+ extras/usb_id \
+ extras/volume_id \
+ extras/rule_generator"
+
+ use selinux && myconf="${myconf} USE_SELINUX=true"
+
+ # Not everyone has full $CHOST-{ld,ar,etc...} yet
+ local mycross=""
+ type -p ${CHOST}-ar && mycross=${CHOST}-
+
+ echo "get_libdir = $(get_libdir)"
+ # Do not work with emake
+ make \
+ EXTRAS="${extras}" \
+ udevdir="/dev/" \
+ CROSS_COMPILE=${mycross} \
+ ${myconf} || die
+}
+
+src_install() {
+ # we install everything by "hand" and don't rely on the udev Makefile to do
+ # it for us (why? it's easier that way...)
+ dobin udevinfo || die "Required binary not installed properly"
+ dobin udevtest || die "Required binary not installed properly"
+ dobin udevmonitor || die "Required binary not installed properly"
+ into /
+ dosbin udevd || die "Required binary not installed properly"
+ dosbin udevstart || die "Required binary not installed properly"
+ dosbin udevtrigger || die "Required binary not installed properly"
+ dosbin udevcontrol || die "Required binary not installed properly"
+ dosbin udevsettle || die "Required binary not installed properly"
+
+ # Helpers
+ exeinto /lib/udev
+ doexe extras/run_directory/udev_run_devd || die "Required helper not installed properly"
+ doexe extras/run_directory/udev_run_hotplugd || die "Required helper not installed properly"
+ doexe extras/ata_id/ata_id || die "Required helper not installed properly"
+ doexe extras/volume_id/vol_id || die "Required helper not installed properly"
+ doexe extras/scsi_id/scsi_id || die "Required helper not installed properly"
+ doexe extras/usb_id/usb_id || die "Required helper not installed properly"
+ doexe extras/path_id/path_id || die "Required helper not installed properly"
+ doexe extras/cdrom_id/cdrom_id || die "Required helper not installed properly"
+ doexe extras/dasd_id/dasd_id || die "Required helper not installed properly"
+ doexe extras/edd_id/edd_id || die "Required helper not installed properly"
+ doexe extras/rule_generator/write_cd_rules || die "Required helper not installed properly"
+ doexe extras/rule_generator/write_net_rules || die "Required helper not installed properly"
+ doexe extras/rule_generator/rule_generator.functions || die "Required helper not installed properly"
+ keepdir /lib/udev/state
+
+ # vol_id library (needed by mount and HAL)
+ dolib extras/volume_id/lib/*.a extras/volume_id/lib/*.so*
+ # move the .a files to /usr/lib
+ dodir /usr/$(get_libdir)
+ mv -f "${D}"/$(get_libdir)/*.a "${D}"/usr/$(get_libdir)/
+
+ # handle static linking bug #4411
+ gen_usr_ldscript libvolume_id.so
+
+ # save pkgconfig info
+ insinto /usr/$(get_libdir)/pkgconfig
+ doins extras/volume_id/lib/*.pc
+
+ #exeinto /etc/udev/scripts
+ exeinto /lib/udev
+ #doexe extras/ide-devfs.sh
+ #doexe extras/scsi-devfs.sh
+ #doexe extras/raid-devfs.sh
+ doexe extras/floppy/create_floppy_devices || die "Required binary not installed properly"
+ doexe extras/firmware/firmware.sh || die "Required binary not installed properly"
+ doexe ${FILESDIR}/net.sh || die "Required binary not installed properly"
+ doexe ${FILESDIR}/seq_node.sh || die "Required binary not installed properly"
+
+ # Our udev config file
+ insinto /etc/udev
+ newins ${FILESDIR}/udev.conf.post_081 udev.conf
+
+ # Our rules files
+ insinto /etc/udev/rules.d/
+ newins etc/udev/gentoo/udev.rules 50-udev.rules
+ newins ${FILESDIR}/udev.rules-104 50-udev.rules
+ newins ${FILESDIR}/05-udev-early.rules-104 05-udev-early.rules
+ doins ${FILESDIR}/95-net.rules
+ # Use upstream's persistent rules for devices
+ doins etc/udev/rules.d/60-*.rules
+ doins extras/rule_generator/75-*.rules || die "rules not installed properly"
+
+ # scsi_id configuration
+ insinto /etc
+ doins extras/scsi_id/scsi_id.config
+
+ # set up the /etc/dev.d directory tree
+ dodir /etc/dev.d/default
+ dodir /etc/dev.d/net
+ exeinto /etc/dev.d/net
+ doexe extras/run_directory/dev.d/net/hotplug.dev
+
+ # all of the man pages
+ doman *.7
+ doman *.8
+ doman extras/ata_id/ata_id.8
+ doman extras/edd_id/edd_id.8
+ doman extras/scsi_id/scsi_id.8
+ doman extras/volume_id/vol_id.8
+ doman extras/dasd_id/dasd_id.8
+ doman extras/cdrom_id/cdrom_id.8
+ # create a extra symlink for udevcontrol
+ ln -s "${D}"/usr/share/man/man8/udevd.8.gz \
+ "${D}"/usr/share/man/man8/udevcontrol.8.gz
+
+ # our udev hooks into the rc system
+ insinto /lib/rcscripts/addons
+ newins "${FILESDIR}"/udev-start-099.sh udev-start.sh
+ doins "${FILESDIR}"/udev-stop.sh
+
+ # needed to compile latest Hal
+ insinto /usr/include
+ doins extras/volume_id/lib/libvolume_id.h
+
+ dodoc ChangeLog FAQ README TODO RELEASE-NOTES
+ dodoc docs/{overview,udev_vs_devfs}
+ dodoc docs/writing_udev_rules/*
+
+ newdoc extras/volume_id/README README_volume_id
+
+}
+
+pkg_preinst() {
+ if [[ -d ${ROOT}/lib/udev-state ]] ; then
+ mv -f "${ROOT}"/lib/udev-state/* "${D}"/lib/udev/state/
+ rm -r "${ROOT}"/lib/udev-state
+ fi
+
+ if [ -f "${ROOT}/etc/udev/udev.config" -a \
+ ! -f "${ROOT}/etc/udev/udev.rules" ]
+ then
+ mv -f ${ROOT}/etc/udev/udev.config ${ROOT}/etc/udev/udev.rules
+ fi
+
+ # delete the old udev.hotplug symlink if it is present
+ if [ -h "${ROOT}/etc/hotplug.d/default/udev.hotplug" ]
+ then
+ rm -f ${ROOT}/etc/hotplug.d/default/udev.hotplug
+ fi
+
+ # delete the old wait_for_sysfs.hotplug symlink if it is present
+ if [ -h "${ROOT}/etc/hotplug.d/default/05-wait_for_sysfs.hotplug" ]
+ then
+ rm -f ${ROOT}/etc/hotplug.d/default/05-wait_for_sysfs.hotplug
+ fi
+
+ # delete the old wait_for_sysfs.hotplug symlink if it is present
+ if [ -h "${ROOT}/etc/hotplug.d/default/10-udev.hotplug" ]
+ then
+ rm -f ${ROOT}/etc/hotplug.d/default/10-udev.hotplug
+ fi
+
+ # is there a stale coldplug initscript? (CONFIG_PROTECT leaves it behind)
+ coldplug_stale=""
+ if [ -f "${ROOT}/etc/init.d/coldplug" ]
+ then
+ coldplug_stale="1"
+ fi
+
+ # Create some nodes that we know we need.
+ # set the time/date so we can see in /dev which ones we copied over
+ # in the udev-start.sh script
+ mkdir -p ${ROOT}/lib/udev/devices
+
+ if [ ! -e ${ROOT}/lib/udev/devices/null ] ; then
+ mknod ${ROOT}/lib/udev/devices/null c 1 3
+ fi
+ chmod 666 ${ROOT}/lib/udev/devices/null
+ touch -t 200010220101 ${ROOT}/lib/udev/devices/null
+
+ if [ ! -e ${ROOT}/lib/udev/devices/zero ] ; then
+ mknod ${ROOT}/lib/udev/devices/zero c 1 5
+ fi
+ chmod 666 ${ROOT}/lib/udev/devices/zero
+ touch -t 200010220101 ${ROOT}/lib/udev/devices/zero
+
+ if [ ! -e ${ROOT}/lib/udev/devices/console ] ; then
+ mknod ${ROOT}/lib/udev/devices/console c 5 1
+ fi
+ chmod 600 ${ROOT}/lib/udev/devices/console
+ chown root:tty ${ROOT}/lib/udev/devices/console
+ touch -t 200010220101 ${ROOT}/lib/udev/devices/console
+
+ if [ ! -e ${ROOT}/lib/udev/devices/urandom ] ; then
+ mknod ${ROOT}/lib/udev/devices/urandom c 1 9
+ fi
+ chmod 666 ${ROOT}/lib/udev/devices/urandom
+ touch -t 200010220101 ${ROOT}/lib/udev/devices/urandom
+}
+
+pkg_postinst() {
+ if [ "${ROOT}" = "/" -a -n "`pidof udevd`" ]
+ then
+ killall -15 udevd &>/dev/null
+ sleep 1
+ killall -9 udevd &>/dev/null
+ fi
+ /sbin/udevd --daemon
+
+ # people want reminders, I'll give them reminders. Odds are they will
+ # just ignore them anyway...
+ if has_version '<sys-fs/udev-046' ; then
+ ewarn "Note: If you rely on the output of udevinfo for anything, please"
+ ewarn " either run 'udevstart' now, or reboot, in order to get a"
+ ewarn " up-to-date udev database."
+ ewarn
+ fi
+ if has_version '<sys-fs/udev-050' ; then
+ ewarn "Note: If you had written some custom permissions rules, please"
+ ewarn " realize that the permission rules are now part of the main"
+ ewarn " udev rules files and are not stand-alone anymore. This means"
+ ewarn " you need to rewrite them."
+ ewarn
+ fi
+ if has_version '<sys-fs/udev-059' ; then
+ ewarn "Note: If you are upgrading from a version of udev prior to 059"
+ ewarn " and you have written custom rules, and rely on the etc/dev.d/"
+ ewarn " functionality, or the etc/hotplug.d functionality, or just"
+ ewarn " want to write some very cool and power udev rules, please "
+ ewarn " read the RELEASE-NOTES file for details on what has changed"
+ ewarn " with this feature, and how to change your rules to work properly."
+ ewarn
+ elif has_version '<sys-fs/udev-057' ; then
+ ewarn "Note: If you have written custom rules, and rely on the etc/dev.d/"
+ ewarn " functionality, please read the RELEASE-NOTES file for details"
+ ewarn " on what has changed with this feature, and how to change your"
+ ewarn " rules to work properly."
+ ewarn
+ fi
+ if has_version '<sys-fs/udev-063' ; then
+ ewarn "Note: If you use the devfs-style names for your block devices"
+ ewarn " or use devfs-style names in /etc/inittab or /etc/securetty or"
+ ewarn " your GRUB or LILO kernel boot command line, you need to"
+ ewarn " change them back to LSB compliant names, as the devfs names are"
+ ewarn " now gone. If you wish to use some persistent names for your"
+ ewarn " block devices, look at the symlinks in /dev/disk/ for the names"
+ ewarn " you can use."
+ ewarn
+ fi
+
+ if [[ ${coldplug_stale} == "1" ]] ; then
+ ewarn "A stale coldplug init script found. You should run:"
+ ewarn
+ ewarn " rc-update del coldplug"
+ ewarn " rm -f /etc/init.d/coldplug"
+ ewarn
+ ewarn "udev now provides its own coldplug functionality."
+ fi
+
+ # delete 40-scsi-hotplug.rules - all integrated in 50-udev.rules
+ if has_version "=sys-fs/udev-103-r3"; then
+ if [[ -e "${ROOT}/etc/udev/rules.d/40-scsi-hotplug.rules" ]]
+ then
+ ewarn "Deleting stray 40-scsi-hotplug.rules"
+ ewarn "installed by sys-fs/udev-103-r3"
+ rm -f ${ROOT}/etc/udev/rules.d/40-scsi-hotplug.rules
+ fi
+ fi
+
+ einfo
+ einfo "For more information on udev on Gentoo, writing udev rules, and"
+ einfo " fixing known issues visit:"
+ einfo " http://www.gentoo.org/doc/en/udev-guide.xml"
+}
projects / gentoo.git / commitdiff