+++ /dev/null
-# Copyright 1999-2010 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-print/hplip/hplip-3.10.2.ebuild,v 1.2 2010/03/04 22:15:35 billie Exp $
-
-EAPI=2
-
-inherit fdo-mime linux-info python autotools
-
-DESCRIPTION="HP Linux Imaging and Printing System. Includes printer, scanner, fax drivers and service tools."
-HOMEPAGE="http://hplipopensource.com/hplip-web/index.html"
-SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~ppc ~ppc64 ~x86"
-
-# zeroconf does not work properly with >=cups-1.4. thus support for it is also disabled in hplip.
-IUSE="doc fax gtk +hpcups hpijs libnotify minimal -new-hpcups parport policykit qt4 scanner snmp static-ppds -udev-acl"
-
-COMMON_DEPEND="
- media-libs/jpeg
- hpijs? ( >=net-print/foomatic-filters-3.0.20080507[cups] )
- udev-acl? ( >=sys-fs/udev-145[extras] )
- snmp? (
- net-analyzer/net-snmp
- dev-libs/openssl
- )
- !minimal? (
- net-print/cups
- virtual/libusb:0
- >=dev-lang/python-2.4.4[threads,xml]
- scanner? ( >=media-gfx/sane-backends-1.0.19-r1 )
- fax? ( sys-apps/dbus )
- )"
-
-DEPEND="${COMMON_DEPEND}
- dev-util/pkgconfig"
-
-RDEPEND="${COMMON_DEPEND}
- >=app-text/ghostscript-gpl-8.70
- !static-ppds? ( || ( >=net-print/cups-1.4.0 net-print/cupsddk ) )
- !minimal? (
- dev-python/pygobject
- kernel_linux? ( >=sys-fs/udev-114 )
- scanner? (
- gtk? ( media-gfx/xsane )
- !gtk? ( || ( media-gfx/sane-frontends dev-python/imaging ) )
- )
- fax? (
- dev-python/reportlab
- dev-python/dbus-python
- )
- qt4? (
- dev-python/PyQt4[dbus,X]
- libnotify? (
- dev-python/notify-python
- )
- policykit? (
- sys-auth/policykit
- )
- )
- )"
-
-CONFIG_CHECK="~PARPORT ~PPDEV"
-ERROR_PARPORT="Please make sure parallel port support is enabled in your kernel (PARPORT and PPDEV)."
-
-pkg_setup() {
- ! use qt4 && ewarn "You need USE=qt4 for the hplip GUI."
-
- use scanner && ! use gtk && ewarn "You need USE=gtk for the scanner GUI."
-
- if ! use hpcups && ! use hpijs ; then
- ewarn "Installing neither hpcups (USE=-hpcups) nor hpijs (USE=-hpijs) driver,"
- ewarn "which is probably not what you want."
- ewarn "You will almost certainly not be able to print."
- ewarn "Recommended USE flags: USE=\"hpcups -hpijs\")."
- fi
-
- if use minimal ; then
- ewarn "Installing driver portions only, make sure you know what you are doing."
- ewarn "Depending on the USE flags set for hpcups and/or hpijs the appropiate"
- ewarn "drivers are installed."
- else
- use parport && linux-info_pkg_setup
- fi
-}
-
-src_prepare() {
- # Do not install desktop files if there is no gui
- # Upstream bug: https://bugs.launchpad.net/hplip/+bug/452113
- epatch "${FILESDIR}"/${PN}-3.9.10-desktop.patch
-
- # Browser detection through xdg-open
- # Upstream bug: https://bugs.launchpad.net/hplip/+bug/482674
- epatch "${FILESDIR}"/${PN}-3.9.10-browser.patch
-
- # Use cups-config when checking for cupsddk
- # Upstream bug: https://bugs.launchpad.net/hplip/+bug/483136
- epatch "${FILESDIR}"/${PN}-3.9.12-cupsddk.patch
-
- # htmldocs are not installed under docdir/html so enable htmldir configure switch
- # Upstream bug: https://bugs.launchpad.net/hplip/+bug/483217
- epatch "${FILESDIR}"/${PN}-3.9.10-htmldir.patch
-
- # Increase systray check timeout for slower machines
- # Upstream bug: https://bugs.launchpad.net/hplip/+bug/335662
- epatch "${FILESDIR}"/${PN}-3.9.12-systray.patch
-
- # SYSFS deprecated but kept upstream for compatibility reasons
- # Upstream bug: https://bugs.launchpad.net/hplip/+bug/346390
- sed -i -e "s/SYSFS/ATTRS/g" -e "s/sysfs/attrs/g" data/rules/56-hpmud_support.rules \
- data/rules/55-hpmud.rules || die
-
- # Force recognition of Gentoo distro by hp-check
- sed -i \
- -e "s:file('/etc/issue', 'r').read():'Gentoo':" \
- installer/core_install.py || die
-
- # Use system foomatic-rip for hpijs driver instead of foomatic-rip-hplip
- # The hpcups driver does not use foomatic-rip
- local i
- for i in ppd/hpijs/*.ppd.gz
- do
- rm -f ${i}.temp
- gunzip -c ${i} | sed 's/foomatic-rip-hplip/foomatic-rip/g' | gzip > ${i}.temp || die
- mv ${i}.temp ${i}
- done
-
- eautoreconf
-}
-
-src_configure() {
- local gui_build myconf drv_build minimal_build
-
- if use qt4 ; then
- gui_build="--enable-gui-build --enable-qt4 --disable-qt3"
- if use policykit ; then
- myconf="--enable-policykit"
- else
- myconf="--disable-policykit"
- fi
- else
- gui_build="--disable-gui-build --disable-qt3 --disable-qt4"
- fi
-
- if use fax || use qt4 ; then
- myconf="${myconf} --enable-dbus-build"
- else
- myconf="${myconf} --disable-dbus-build"
- fi
-
- if use hpcups ; then
- drv_build="$(use_enable hpcups hpcups-install)"
- if use static-ppds ; then
- drv_build="${drv_build} --enable-cups-ppd-install"
- drv_build="${drv_build} --disable-cups-drv-install"
- else
- drv_build="${drv_build} --enable-cups-drv-install"
- drv_build="${drv_build} --disable-cups-ppd-install"
- fi
- else
- drv_build="--disable-hpcups-install --disable-cups-drv-install"
- drv_build="${drv_build} --disable-cups-ppd-install"
- fi
-
- if use hpijs ; then
- drv_build="${drv_build} $(use_enable hpijs hpijs-install)"
- if use static-ppds ; then
- drv_build="${drv_build} --enable-foomatic-ppd-install"
- drv_build="${drv_build} --disable-foomatic-drv-install"
- else
- drv_build="${drv_build} --enable-foomatic-drv-install"
- drv_build="${drv_build} --disable-foomatic-ppd-install"
- fi
- else
- drv_build="${drv_build} --disable-hpijs-install"
- drv_build="${drv_build} --disable-foomatic-drv-install"
- drv_build="${drv_build} --disable-foomatic-ppd-install"
- fi
-
- if use minimal ; then
- if use hpijs ; then
- minimal_build="--enable-hpijs-only-build"
- else
- minimal_build="--disable-hpijs-only-build"
- fi
- if use hpcups ; then
- minimal_build="${minimal_build} --enable-hpcups-only-build"
- else
- minimal_build="${minimal_build} --disable-hpcups-only-build"
- fi
- fi
-
- econf \
- --disable-dependency-tracking \
- --disable-cups11-build \
- --disable-lite-build \
- --disable-foomatic-rip-hplip-install \
- --disable-shadow-build \
- --with-cupsbackenddir=$(cups-config --serverbin)/backend \
- --with-cupsfilterdir=$(cups-config --serverbin)/filter \
- --with-htmldir=/usr/share/doc/${P}/html \
- ${gui_build} \
- ${myconf} \
- ${drv_build} \
- ${minimal_build} \
- $(use_enable new-hpcups new-hpcups) \
- $(use_enable doc doc-build) \
- $(use_enable fax fax-build) \
- $(use_enable parport pp-build) \
- $(use_enable scanner scan-build) \
- $(use_enable snmp network-build) \
- $(use_enable udev-acl udev-acl-rules)
-}
-
-src_install() {
- emake DESTDIR="${D}" install || die
-
- # Installed by sane-backends
- # Gentoo Bug: #201023
- rm -f "${D}"/etc/sane.d/dll.conf || die
-}
-
-pkg_postinst() {
- use !minimal && python_mod_optimize /usr/share/${PN}
- fdo-mime_desktop_database_update
-
- elog "You should run hp-setup as root if you are installing hplip for the first time,"
- elog "and may also need to run it if you are upgrading from an earlier version."
- elog
- elog "If your device is connected using USB, users will need to be in the lp group to"
- elog "access it."
- elog
- elog "This release doesn't use an init script anymore, so you should probably do a"
- elog "'rc-update del hplip' if you are updating from an old version."
- elog
- elog "Starting with versions of hplip >=3.9.8 mDNS is the default network search"
- elog "mechanism. To make use of it you need to activate the zeroconf flag on cups."
- elog "If you prefer the SLP method you have to choose this when configuring the"
- elog "device."
-}
-
-pkg_postrm() {
- use !minimal && python_mod_cleanup /usr/share/${PN}
- fdo-mime_desktop_database_update
-}
projects / gentoo.git / commitdiff