_AC_PTH_VERBOSE([ o path: $_pth_location])
_AC_PTH_VERBOSE([ o type: $_pth_type])
if test ".$_pth_version" = .; then
- if test ".$with_pth" != .yes; then
- _AC_PTH_ERROR([dnl
- Unable to locate GNU Pth under $with_pth.
- Please specify the correct path to either a GNU Pth installation tree
- (use --with-pth=DIR if you used --prefix=DIR for installing GNU Pth in
- the past) or to a GNU Pth source tree (use --with-pth=DIR if DIR is a
- path to a pth-X.Y.Z/ directory; but make sure the package is already
- built, i.e., the "configure; make" step was already performed there).])
- else
- _AC_PTH_ERROR([dnl
- Unable to locate GNU Pth in any system-wide location (see \$PATH).
- Please specify the correct path to either a GNU Pth installation tree
- (use --with-pth=DIR if you used --prefix=DIR for installing GNU Pth in
- the past) or to a GNU Pth source tree (use --with-pth=DIR if DIR is a
- path to a pth-X.Y.Z/ directory; but make sure the package is already
- built, i.e., the "configure; make" step was already performed there).])
- fi
- fi
+ with_pth=no
+ else
+dnl if test ".$with_pth" != .yes; then
+dnl _AC_PTH_ERROR([dnl
+dnl Unable to locate GNU Pth under $with_pth.
+dnl Please specify the correct path to either a GNU Pth installation tree
+dnl (use --with-pth=DIR if you used --prefix=DIR for installing GNU Pth in
+dnl the past) or to a GNU Pth source tree (use --with-pth=DIR if DIR is a
+dnl path to a pth-X.Y.Z/ directory; but make sure the package is already
+dnl built, i.e., the "configure; make" step was already performed there).])
+dnl else
+dnl _AC_PTH_ERROR([dnl
+dnl Unable to locate GNU Pth in any system-wide location (see \$PATH).
+dnl Please specify the correct path to either a GNU Pth installation tree
+dnl (use --with-pth=DIR if you used --prefix=DIR for installing GNU Pth in
+dnl the past) or to a GNU Pth source tree (use --with-pth=DIR if DIR is a
+dnl path to a pth-X.Y.Z/ directory; but make sure the package is already
+dnl built, i.e., the "configure; make" step was already performed there).])
+dnl fi
+dnl fi
dnl #
dnl # Check whether the found version is sufficiently new
dnl #
_AC_PTH_VERBOSE([ o PTH_LDFLAGS=\"$PTH_LDFLAGS\"])
_AC_PTH_VERBOSE([ o PTH_LIBS=\"$PTH_LIBS\"])
fi
+fi
if test ".$with_pth" != .no; then
AC_MSG_RESULT([version $_pth_version, $_pth_type under $_pth_location])
ifelse([$5], , :, [$5])
fi
])
+# libtool.m4 - Configure libtool for the host system. -*-Shell-script-*-
+## Copyright 1996, 1997, 1998, 1999, 2000, 2001
+## Free Software Foundation, Inc.
+## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful, but
+## WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+##
+## As a special exception to the GNU General Public License, if you
+## distribute this file as part of a program that contains a
+## configuration script generated by Autoconf, you may include it under
+## the same distribution terms that you use for the rest of that program.
+
+# serial 46 AC_PROG_LIBTOOL
+
+AC_DEFUN([AC_PROG_LIBTOOL],
+[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+# Prevent multiple expansion
+define([AC_PROG_LIBTOOL], [])
+])
+
+AC_DEFUN([AC_LIBTOOL_SETUP],
+[AC_PREREQ(2.13)dnl
+AC_REQUIRE([AC_ENABLE_SHARED])dnl
+AC_REQUIRE([AC_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_LD])dnl
+AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
+AC_REQUIRE([AC_PROG_NM])dnl
+AC_REQUIRE([LT_AC_PROG_SED])dnl
+
+AC_REQUIRE([AC_PROG_LN_S])dnl
+AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
+AC_REQUIRE([AC_OBJEXT])dnl
+AC_REQUIRE([AC_EXEEXT])dnl
+dnl
+
+_LT_AC_PROG_ECHO_BACKSLASH
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ AC_PATH_MAGIC
+ fi
+ ;;
+esac
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+AC_CHECK_TOOL(STRIP, strip, :)
+
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+enable_win32_dll=yes, enable_win32_dll=no)
+
+AC_ARG_ENABLE(libtool-lock,
+ [ --disable-libtool-lock avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+ [AC_LANG_SAVE
+ AC_LANG_C
+ AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+ AC_LANG_RESTORE])
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
+
+ # recent cygwin and mingw systems supply a stub DllMain which the user
+ # can override, but on older systems we have to supply one
+ AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
+ [AC_TRY_LINK([],
+ [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
+ DllMain (0, 0, 0);],
+ [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
+
+ case $host/$CC in
+ *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
+ # old mingw systems require "-dll" to link a DLL, while more recent ones
+ # require "-mdll"
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -mdll"
+ AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
+ [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
+ CFLAGS="$SAVE_CFLAGS" ;;
+ *-*-cygwin* | *-*-pw32*)
+ # cygwin systems need to pass --dll to the linker, and not link
+ # crt.o which will require a WinMain@16 definition.
+ lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
+ esac
+ ;;
+ ])
+esac
+
+_LT_AC_LTCONFIG_HACK
+
+])
+
+# AC_LIBTOOL_HEADER_ASSERT
+# ------------------------
+AC_DEFUN([AC_LIBTOOL_HEADER_ASSERT],
+[AC_CACHE_CHECK([whether $CC supports assert without backlinking],
+ [lt_cv_func_assert_works],
+ [case $host in
+ *-*-solaris*)
+ if test "$GCC" = yes && test "$with_gnu_ld" != yes; then
+ case `$CC --version 2>/dev/null` in
+ [[12]].*) lt_cv_func_assert_works=no ;;
+ *) lt_cv_func_assert_works=yes ;;
+ esac
+ fi
+ ;;
+ esac])
+
+if test "x$lt_cv_func_assert_works" = xyes; then
+ AC_CHECK_HEADERS(assert.h)
+fi
+])# AC_LIBTOOL_HEADER_ASSERT
+
+# _LT_AC_CHECK_DLFCN
+# --------------------
+AC_DEFUN([_LT_AC_CHECK_DLFCN],
+[AC_CHECK_HEADERS(dlfcn.h)
+])# _LT_AC_CHECK_DLFCN
+
+# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+# ---------------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
+[AC_REQUIRE([AC_CANONICAL_HOST])
+AC_REQUIRE([AC_PROG_NM])
+AC_REQUIRE([AC_OBJEXT])
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [dnl
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+# Transform the above into a raw symbol and a C symbol.
+symxfrm='\1 \2\3 \3'
+
+# Transform an extracted symbol line into a proper C declaration
+lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[[BCDT]]'
+ ;;
+cygwin* | mingw* | pw32*)
+ symcode='[[ABCDGISTW]]'
+ ;;
+hpux*) # Its linker distinguishes data from code symbols
+ lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+ lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
+ ;;
+irix* | nonstopux*)
+ symcode='[[BCDEGRST]]'
+ ;;
+solaris* | sysv5*)
+ symcode='[[BDT]]'
+ ;;
+sysv4)
+ symcode='[[DFNSTU]]'
+ ;;
+esac
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $host_os in
+mingw*)
+ opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
+ symcode='[[ABCDGISTW]]'
+fi
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Write the raw and C identifiers.
+lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+ rm -f conftest*
+ cat > conftest.$ac_ext <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+EOF
+
+ if AC_TRY_EVAL(ac_compile); then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if egrep ' nm_test_var$' "$nlist" >/dev/null; then
+ if egrep ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'
+
+ cat <<EOF >> conftest.$ac_ext
+#if defined (__STDC__) && __STDC__
+# define lt_ptr void *
+#else
+# define lt_ptr char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+ const char *name;
+ lt_ptr address;
+}
+lt_preloaded_symbols[[]] =
+{
+EOF
+ sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext
+ cat <<\EOF >> conftest.$ac_ext
+ {0, (lt_ptr) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ save_LIBS="$LIBS"
+ save_CFLAGS="$CFLAGS"
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$no_builtin_flag"
+ if AC_TRY_EVAL(ac_link) && test -s conftest; then
+ pipe_works=yes
+ fi
+ LIBS="$save_LIBS"
+ CFLAGS="$save_CFLAGS"
+ else
+ echo "cannot find nm_test_func in $nlist" >&AC_FD_CC
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&AC_FD_CC
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC
+ fi
+ else
+ echo "$progname: failed program was:" >&AC_FD_CC
+ cat conftest.$ac_ext >&5
+ fi
+ rm -f conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+])
+global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ global_symbol_to_cdecl=
+ global_symbol_to_c_name_address=
+else
+ global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
+ global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address"
+fi
+if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address";
+then
+ AC_MSG_RESULT(failed)
+else
+ AC_MSG_RESULT(ok)
+fi
+]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+
+# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
+# ---------------------------------
+AC_DEFUN([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR],
+[# Find the correct PATH separator. Usually this is `:', but
+# DJGPP uses `;' like DOS.
+if test "X${PATH_SEPARATOR+set}" != Xset; then
+ UNAME=${UNAME-`uname 2>/dev/null`}
+ case X$UNAME in
+ *-DOS) lt_cv_sys_path_separator=';' ;;
+ *) lt_cv_sys_path_separator=':' ;;
+ esac
+ PATH_SEPARATOR=$lt_cv_sys_path_separator
+fi
+])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
+
+# _LT_AC_PROG_ECHO_BACKSLASH
+# --------------------------
+# Add some code to the start of the generated configure script which
+# will find an echo command which doesn't interpret backslashes.
+AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
+[ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+ [AC_DIVERT_PUSH(NOTICE)])
+_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
+
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$ECHO in
+X*--fallback-echo)
+ # Remove one level of quotation (which was required for Make).
+ ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+ ;;
+esac
+
+echo=${ECHO-echo}
+if test "X[$]1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+elif test "X[$]1" = X--fallback-echo; then
+ # Avoid inline document here, it may be left over
+ :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+ # Yippee, $echo works!
+ :
+else
+ # Restart under the correct shell.
+ exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
+fi
+
+if test "X[$]1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<EOF
+$*
+EOF
+ exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+if test -z "$ECHO"; then
+if test "X${echo_test_string+set}" != Xset; then
+# find a string as large as possible, as long as the shell can cope with it
+ for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+ if (echo_test_string="`eval $cmd`") 2>/dev/null &&
+ echo_test_string="`eval $cmd`" &&
+ (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+ then
+ break
+ fi
+ done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ :
+else
+ # The Solaris, AIX, and Digital Unix default echo programs unquote
+ # backslashes. This makes it impossible to quote backslashes using
+ # echo "$something" | sed 's/\\/\\\\/g'
+ #
+ # So, first we look for a working echo in the user's PATH.
+
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for dir in $PATH /usr/ucb; do
+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ echo="$dir/echo"
+ break
+ fi
+ done
+ IFS="$save_ifs"
+
+ if test "X$echo" = Xecho; then
+ # We didn't find a better echo, so look for alternatives.
+ if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # This shell has a builtin print -r that does the trick.
+ echo='print -r'
+ elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+ test "X$CONFIG_SHELL" != X/bin/ksh; then
+ # If we have ksh, try running configure again with it.
+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+ export ORIGINAL_CONFIG_SHELL
+ CONFIG_SHELL=/bin/ksh
+ export CONFIG_SHELL
+ exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+ else
+ # Try using printf.
+ echo='printf %s\n'
+ if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # Cool, printf works
+ :
+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+ export CONFIG_SHELL
+ SHELL="$CONFIG_SHELL"
+ export SHELL
+ echo="$CONFIG_SHELL [$]0 --fallback-echo"
+ elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ echo="$CONFIG_SHELL [$]0 --fallback-echo"
+ else
+ # maybe with a smaller string...
+ prev=:
+
+ for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+ if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
+ then
+ break
+ fi
+ prev="$cmd"
+ done
+
+ if test "$prev" != 'sed 50q "[$]0"'; then
+ echo_test_string=`eval $prev`
+ export echo_test_string
+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+ else
+ # Oops. We lost completely, so just stick with echo.
+ echo=echo
+ fi
+ fi
+ fi
+ fi
+fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+ECHO=$echo
+if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+ ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+fi
+
+AC_SUBST(ECHO)
+AC_DIVERT_POP
+])# _LT_AC_PROG_ECHO_BACKSLASH
+
+# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ------------------------------------------------------------------
+AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
+[if test "$cross_compiling" = yes; then :
+ [$4]
+else
+ AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<EOF
+[#line __oline__ "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ /* dlclose (self); */
+ }
+
+ exit (status);
+}]
+EOF
+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) $1 ;;
+ x$lt_dlneed_uscore) $2 ;;
+ x$lt_unknown|x*) $3 ;;
+ esac
+ else :
+ # compilation failed
+ $3
+ fi
+fi
+rm -fr conftest*
+])# _LT_AC_TRY_DLOPEN_SELF
+
+# AC_LIBTOOL_DLOPEN_SELF
+# -------------------
+AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
+[if test "x$enable_dlopen" != xyes; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
+
+ case $host_os in
+ beos*)
+ lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+ cygwin* | mingw* | pw32*)
+ lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen_libs=
+ ;;
+
+ *)
+ AC_CHECK_FUNC([shl_load],
+ [lt_cv_dlopen="shl_load"],
+ [AC_CHECK_LIB([dld], [shl_load],
+ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
+ [AC_CHECK_FUNC([dlopen],
+ [lt_cv_dlopen="dlopen"],
+ [AC_CHECK_LIB([dl], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+ [AC_CHECK_LIB([svld], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+ [AC_CHECK_LIB([dld], [dld_link],
+ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+ ])
+ ])
+ ])
+ ])
+ ])
+ ;;
+ esac
+
+ if test "x$lt_cv_dlopen" != xno; then
+ enable_dlopen=yes
+ else
+ enable_dlopen=no
+ fi
+
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS="$CPPFLAGS"
+ AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+ save_LDFLAGS="$LDFLAGS"
+ eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+ AC_CACHE_CHECK([whether a program can dlopen itself],
+ lt_cv_dlopen_self, [dnl
+ _LT_AC_TRY_DLOPEN_SELF(
+ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+ ])
+
+ if test "x$lt_cv_dlopen_self" = xyes; then
+ LDFLAGS="$LDFLAGS $link_static_flag"
+ AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+ lt_cv_dlopen_self_static, [dnl
+ _LT_AC_TRY_DLOPEN_SELF(
+ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
+ ])
+ fi
+
+ CPPFLAGS="$save_CPPFLAGS"
+ LDFLAGS="$save_LDFLAGS"
+ LIBS="$save_LIBS"
+ ;;
+ esac
+
+ case $lt_cv_dlopen_self in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+
+ case $lt_cv_dlopen_self_static in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
+])# AC_LIBTOOL_DLOPEN_SELF
+
+AC_DEFUN([_LT_AC_LTCONFIG_HACK],
+[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])dnl
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e s/^X//'
+sed_quote_subst='s/\([[\\"\\`$\\\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([[\\"\\`\\\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Constants:
+rm="rm -f"
+
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except M$VC,
+# which needs '.lib').
+libext=a
+ltmain="$ac_aux_dir/ltmain.sh"
+ofile="$default_ofile"
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+need_locks="$enable_libtool_lock"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+test -z "$AS" && AS=as
+test -z "$CC" && CC=cc
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$LD" && LD=ld
+test -z "$LN_S" && LN_S="ln -s"
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+test -z "$NM" && NM=nm
+test -z "$OBJDUMP" && OBJDUMP=objdump
+test -z "$RANLIB" && RANLIB=:
+test -z "$STRIP" && STRIP=:
+test -z "$ac_objext" && ac_objext=o
+
+if test x"$host" != x"$build"; then
+ ac_tool_prefix=${host_alias}-
+else
+ ac_tool_prefix=
+fi
+
+# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
+case $host_os in
+linux-gnu*) ;;
+linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
+esac
+
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
+ ;;
+ *)
+ old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+# Allow CC to be a program name with arguments.
+set dummy $CC
+compiler="[$]2"
+
+## FIXME: this should be a separate macro
+##
+AC_MSG_CHECKING([for objdir])
+rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+AC_MSG_RESULT($objdir)
+##
+## END FIXME
+
+
+## FIXME: this should be a separate macro
+##
+AC_ARG_WITH(pic,
+[ --with-pic try to use only PIC/non-PIC objects [default=use both]],
+pic_mode="$withval", pic_mode=default)
+test -z "$pic_mode" && pic_mode=default
+
+# We assume here that the value for lt_cv_prog_cc_pic will not be cached
+# in isolation, and that seeing it set (from the cache) indicates that
+# the associated values are set (in the cache) correctly too.
+AC_MSG_CHECKING([for $compiler option to produce PIC])
+AC_CACHE_VAL(lt_cv_prog_cc_pic,
+[ lt_cv_prog_cc_pic=
+ lt_cv_prog_cc_shlib=
+ lt_cv_prog_cc_wl=
+ lt_cv_prog_cc_static=
+ lt_cv_prog_cc_no_builtin=
+ lt_cv_prog_cc_can_build_shared=$can_build_shared
+
+ if test "$GCC" = yes; then
+ lt_cv_prog_cc_wl='-Wl,'
+ lt_cv_prog_cc_static='-static'
+
+ case $host_os in
+ aix*)
+ # Below there is a dirty hack to force normal static linking with -ldl
+ # The problem is because libdl dynamically linked with both libc and
+ # libC (AIX C++ library), which obviously doesn't included in libraries
+ # list by gcc. This cause undefined symbols with -static flags.
+ # This hack allows C programs to be linked with "-static -ldl", but
+ # not sure about C++ programs.
+ lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
+ ;;
+ amigaos*)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_cv_prog_cc_pic='-fno-common'
+ ;;
+ cygwin* | mingw* | pw32* | os2*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ lt_cv_prog_cc_pic='-DDLL_EXPORT'
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ lt_cv_prog_cc_pic=-Kconform_pic
+ fi
+ ;;
+ *)
+ lt_cv_prog_cc_pic='-fPIC'
+ ;;
+ esac
+ else
+ # PORTME Check for PIC flags for the system compiler.
+ case $host_os in
+ aix3* | aix4* | aix5*)
+ lt_cv_prog_cc_wl='-Wl,'
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_cv_prog_cc_static='-Bstatic'
+ else
+ lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ # Is there a better lt_cv_prog_cc_static that works with the bundled CC?
+ lt_cv_prog_cc_wl='-Wl,'
+ lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive"
+ lt_cv_prog_cc_pic='+Z'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ lt_cv_prog_cc_wl='-Wl,'
+ lt_cv_prog_cc_static='-non_shared'
+ # PIC (with -KPIC) is the default.
+ ;;
+
+ cygwin* | mingw* | pw32* | os2*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ lt_cv_prog_cc_pic='-DDLL_EXPORT'
+ ;;
+
+ newsos6)
+ lt_cv_prog_cc_pic='-KPIC'
+ lt_cv_prog_cc_static='-Bstatic'
+ ;;
+
+ osf3* | osf4* | osf5*)
+ # All OSF/1 code is PIC.
+ lt_cv_prog_cc_wl='-Wl,'
+ lt_cv_prog_cc_static='-non_shared'
+ ;;
+
+ sco3.2v5*)
+ lt_cv_prog_cc_pic='-Kpic'
+ lt_cv_prog_cc_static='-dn'
+ lt_cv_prog_cc_shlib='-belf'
+ ;;
+
+ solaris*)
+ lt_cv_prog_cc_pic='-KPIC'
+ lt_cv_prog_cc_static='-Bstatic'
+ lt_cv_prog_cc_wl='-Wl,'
+ ;;
+
+ sunos4*)
+ lt_cv_prog_cc_pic='-PIC'
+ lt_cv_prog_cc_static='-Bstatic'
+ lt_cv_prog_cc_wl='-Qoption ld '
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ lt_cv_prog_cc_pic='-KPIC'
+ lt_cv_prog_cc_static='-Bstatic'
+ lt_cv_prog_cc_wl='-Wl,'
+ ;;
+
+ uts4*)
+ lt_cv_prog_cc_pic='-pic'
+ lt_cv_prog_cc_static='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec ;then
+ lt_cv_prog_cc_pic='-Kconform_pic'
+ lt_cv_prog_cc_static='-Bstatic'
+ fi
+ ;;
+
+ *)
+ lt_cv_prog_cc_can_build_shared=no
+ ;;
+ esac
+ fi
+])
+if test -z "$lt_cv_prog_cc_pic"; then
+ AC_MSG_RESULT([none])
+else
+ AC_MSG_RESULT([$lt_cv_prog_cc_pic])
+
+ # Check to make sure the pic_flag actually works.
+ AC_MSG_CHECKING([if $compiler PIC flag $lt_cv_prog_cc_pic works])
+ AC_CACHE_VAL(lt_cv_prog_cc_pic_works, [dnl
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
+ AC_TRY_COMPILE([], [], [dnl
+ case $host_os in
+ hpux9* | hpux10* | hpux11*)
+ # On HP-UX, both CC and GCC only warn that PIC is supported... then
+ # they create non-PIC objects. So, if there were any warnings, we
+ # assume that PIC is not supported.
+ if test -s conftest.err; then
+ lt_cv_prog_cc_pic_works=no
+ else
+ lt_cv_prog_cc_pic_works=yes
+ fi
+ ;;
+ *)
+ lt_cv_prog_cc_pic_works=yes
+ ;;
+ esac
+ ], [dnl
+ lt_cv_prog_cc_pic_works=no
+ ])
+ CFLAGS="$save_CFLAGS"
+ ])
+
+ if test "X$lt_cv_prog_cc_pic_works" = Xno; then
+ lt_cv_prog_cc_pic=
+ lt_cv_prog_cc_can_build_shared=no
+ else
+ lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic"
+ fi
+
+ AC_MSG_RESULT([$lt_cv_prog_cc_pic_works])
+fi
+##
+## END FIXME
+
+# Check for any special shared library compilation flags.
+if test -n "$lt_cv_prog_cc_shlib"; then
+ AC_MSG_WARN([\`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries])
+ if echo "$old_CC $old_CFLAGS " | egrep -e "[[ ]]$lt_cv_prog_cc_shlib[[ ]]" >/dev/null; then :
+ else
+ AC_MSG_WARN([add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure])
+ lt_cv_prog_cc_can_build_shared=no
+ fi
+fi
+
+## FIXME: this should be a separate macro
+##
+AC_MSG_CHECKING([if $compiler static flag $lt_cv_prog_cc_static works])
+AC_CACHE_VAL([lt_cv_prog_cc_static_works], [dnl
+ lt_cv_prog_cc_static_works=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
+ AC_TRY_LINK([], [], [lt_cv_prog_cc_static_works=yes])
+ LDFLAGS="$save_LDFLAGS"
+])
+
+# Belt *and* braces to stop my trousers falling down:
+test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static=
+AC_MSG_RESULT([$lt_cv_prog_cc_static_works])
+
+pic_flag="$lt_cv_prog_cc_pic"
+special_shlib_compile_flags="$lt_cv_prog_cc_shlib"
+wl="$lt_cv_prog_cc_wl"
+link_static_flag="$lt_cv_prog_cc_static"
+no_builtin_flag="$lt_cv_prog_cc_no_builtin"
+can_build_shared="$lt_cv_prog_cc_can_build_shared"
+##
+## END FIXME
+
+
+## FIXME: this should be a separate macro
+##
+# Check to see if options -o and -c are simultaneously supported by compiler
+AC_MSG_CHECKING([if $compiler supports -c -o file.$ac_objext])
+AC_CACHE_VAL([lt_cv_compiler_c_o], [
+$rm -r conftest 2>/dev/null
+mkdir conftest
+cd conftest
+echo "int some_variable = 0;" > conftest.$ac_ext
+mkdir out
+# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
+# that will create temporary files in the current directory regardless of
+# the output directory. Thus, making CWD read-only will cause this test
+# to fail, enabling locking or at least warning the user not to do parallel
+# builds.
+chmod -w .
+save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
+compiler_c_o=no
+if { (eval echo configure:__oline__: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s out/conftest.err; then
+ lt_cv_compiler_c_o=no
+ else
+ lt_cv_compiler_c_o=yes
+ fi
+else
+ # Append any errors to the config.log.
+ cat out/conftest.err 1>&AC_FD_CC
+ lt_cv_compiler_c_o=no
+fi
+CFLAGS="$save_CFLAGS"
+chmod u+w .
+$rm conftest* out/*
+rmdir out
+cd ..
+rmdir conftest
+$rm -r conftest 2>/dev/null
+])
+compiler_c_o=$lt_cv_compiler_c_o
+AC_MSG_RESULT([$compiler_c_o])
+
+if test x"$compiler_c_o" = x"yes"; then
+ # Check to see if we can write to a .lo
+ AC_MSG_CHECKING([if $compiler supports -c -o file.lo])
+ AC_CACHE_VAL([lt_cv_compiler_o_lo], [
+ lt_cv_compiler_o_lo=no
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -c -o conftest.lo"
+ save_objext="$ac_objext"
+ ac_objext=lo
+ AC_TRY_COMPILE([], [int some_variable = 0;], [dnl
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ lt_cv_compiler_o_lo=no
+ else
+ lt_cv_compiler_o_lo=yes
+ fi
+ ])
+ ac_objext="$save_objext"
+ CFLAGS="$save_CFLAGS"
+ ])
+ compiler_o_lo=$lt_cv_compiler_o_lo
+ AC_MSG_RESULT([$compiler_o_lo])
+else
+ compiler_o_lo=no
+fi
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+# Check to see if we can do hard links to lock some files if needed
+hard_links="nottested"
+if test "$compiler_c_o" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ AC_MSG_CHECKING([if we can lock with hard links])
+ hard_links=yes
+ $rm conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ AC_MSG_RESULT([$hard_links])
+ if test "$hard_links" = no; then
+ AC_MSG_WARN([\`$CC' does not support \`-c -o', so \`make -j' may be unsafe])
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+if test "$GCC" = yes; then
+ # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
+ AC_MSG_CHECKING([if $compiler supports -fno-rtti -fno-exceptions])
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
+ compiler_rtti_exceptions=no
+ AC_TRY_COMPILE([], [int some_variable = 0;], [dnl
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ compiler_rtti_exceptions=no
+ else
+ compiler_rtti_exceptions=yes
+ fi
+ ])
+ CFLAGS="$save_CFLAGS"
+ AC_MSG_RESULT([$compiler_rtti_exceptions])
+
+ if test "$compiler_rtti_exceptions" = "yes"; then
+ no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
+ else
+ no_builtin_flag=' -fno-builtin'
+ fi
+fi
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+# See if the linker supports building shared libraries.
+AC_MSG_CHECKING([whether the linker ($LD) supports shared libraries])
+
+allow_undefined_flag=
+no_undefined_flag=
+need_lib_prefix=unknown
+need_version=unknown
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+archive_cmds=
+archive_expsym_cmds=
+old_archive_from_new_cmds=
+old_archive_from_expsyms_cmds=
+export_dynamic_flag_spec=
+whole_archive_flag_spec=
+thread_safe_flag_spec=
+hardcode_into_libs=no
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+hardcode_shlibpath_var=unsupported
+runpath_var=
+link_all_deplibs=unknown
+always_export_symbols=no
+export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
+# include_expsyms should be a list of space-separated symbols to be *always*
+# included in the symbol list
+include_expsyms=
+# exclude_expsyms can be an egrep regular expression of symbols to exclude
+# it will be wrapped by ` (' and `)$', so one must not match beginning or
+# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+# as well as any symbol that contains `d'.
+exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+# platforms (ab)use it in PIC code, but their linkers get confused if
+# the symbol is explicitly referenced. Since portable code cannot
+# rely on this symbol name, it's probably fine to never include it in
+# preloaded symbol tables.
+extract_expsyms_cmds=
+
+case $host_os in
+cygwin* | mingw* | pw32*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+openbsd*)
+ with_gnu_ld=no
+ ;;
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix3* | aix4* | aix5*)
+ # On AIX, the GNU linker is very broken
+ # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available.
+ ld_shlibs=no
+ cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+ ;;
+
+ amigaos*)
+ archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+
+ # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+ # that the semantics of dynamic libraries on AmigaOS, at least up
+ # to version 4, is to share data among multiple programs linked
+ # with the same dynamic library. Since this doesn't match the
+ # behavior of shared libraries on other platforms, we can use
+ # them.
+ ld_shlibs=no
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32*)
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+
+ extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
+ sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
+ test -f $output_objdir/impgen.exe || (cd $output_objdir && \
+ if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
+ else $CC -o impgen impgen.c ; fi)~
+ $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
+
+ old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
+
+ # cygwin and mingw dlls have different entry points and sets of symbols
+ # to exclude.
+ # FIXME: what about values for MSVC?
+ dll_entry=__cygwin_dll_entry@12
+ dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
+ case $host_os in
+ mingw*)
+ # mingw values
+ dll_entry=_DllMainCRTStartup@12
+ dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
+ ;;
+ esac
+
+ # mingw and cygwin differ, and it's simplest to just exclude the union
+ # of the two symbol sets.
+ dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
+
+ # recent cygwin and mingw systems supply a stub DllMain which the user
+ # can override, but on older systems we have to supply one (in ltdll.c)
+ if test "x$lt_cv_need_dllmain" = "xyes"; then
+ ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
+ ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
+ test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
+ else
+ ltdll_obj=
+ ltdll_cmds=
+ fi
+
+ # Extract the symbol export list from an `--export-all' def file,
+ # then regenerate the def file from the symbol export list, so that
+ # the compiled dll only exports the symbol export list.
+ # Be careful not to strip the DATA tag left be newer dlltools.
+ export_symbols_cmds="$ltdll_cmds"'
+ $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
+ sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
+
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is.
+ # If DATA tags from a recent dlltool are present, honour them!
+ archive_expsym_cmds='if test "x`sed 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname-def;
+ else
+ echo EXPORTS > $output_objdir/$soname-def;
+ _lt_hint=1;
+ cat $export_symbols | while read symbol; do
+ set dummy \$symbol;
+ case \[$]# in
+ 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
+ 4) echo " \[$]2 \[$]3 \[$]4 ; " >> $output_objdir/$soname-def; _lt_hint=`expr \$_lt_hint - 1`;;
+ *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
+ esac;
+ _lt_hint=`expr 1 + \$_lt_hint`;
+ done;
+ fi~
+ '"$ltdll_cmds"'
+ $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
+ $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
+ $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
+ $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
+ $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris* | sysv5*)
+ if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+ elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ sunos4*)
+ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+
+ if test "$ld_shlibs" = yes; then
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+ export_dynamic_flag_spec='${wl}--export-dynamic'
+ case $host_os in
+ cygwin* | mingw* | pw32*)
+ # dlltool doesn't understand --whole-archive et. al.
+ whole_archive_flag_spec=
+ ;;
+ *)
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec=
+ fi
+ ;;
+ esac
+ fi
+else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$GCC" = yes && test -z "$link_static_flag"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+
+ aix4* | aix5*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ hardcode_direct=yes
+ archive_cmds=''
+ hardcode_libdir_separator=':'
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" && \
+ strings "$collect2name" | grep resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ hardcode_direct=yes
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ esac
+
+ shared_flag='-shared'
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ shared_flag='${wl}-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ # It seems that -bexpall can do strange things, so it is better to
+ # generate a list of symbols to export.
+ always_export_symbols=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ allow_undefined_flag='-berok'
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
+ archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ allow_undefined_flag="-z nodefs"
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+ else
+ hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ allow_undefined_flag='${wl}-berok'
+ # This is a bit strange, but is similar to how AIX traditionally builds
+ # it's shared libraries.
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ # see comment about different semantics on the GNU ld section
+ ld_shlibs=no
+ ;;
+
+ cygwin* | mingw* | pw32*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ old_archive_from_new_cmds='true'
+ # FIXME: Should let the user specify the lib program.
+ old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
+ fix_srcfile_path='`cygpath -w "$srcfile"`'
+ ;;
+
+ darwin* | rhapsody*)
+ case "$host_os" in
+ rhapsody* | darwin1.[[012]])
+ allow_undefined_flag='-undefined suppress'
+ ;;
+ *) # Darwin 1.3 on
+ allow_undefined_flag='-flat_namespace -undefined suppress'
+ ;;
+ esac
+ # FIXME: Relying on posixy $() will cause problems for
+ # cross-compilation, but unfortunately the echo tests do not
+ # yet detect zsh echo's removal of \ escapes. Also zsh mangles
+ # `"' quotes if we put them in here... so don't!
+ archive_cmds='$nonopt $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring'
+ # We need to add '_' to the symbols in $export_symbols first
+ #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ whole_archive_flag_spec='-all_load $convenience'
+ ;;
+
+ freebsd1*)
+ ld_shlibs=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd*)
+ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ case $host_os in
+ hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
+ *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
+ esac
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ hardcode_minus_L=yes # Not in the search PATH, but as the default
+ # location of the library.
+ export_dynamic_flag_spec='${wl}-E'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ link_all_deplibs=yes
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ newsos6)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_shlibpath_var=no
+ ;;
+
+ openbsd*)
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ else
+ case "$host_os" in
+ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ ;;
+
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+
+ #Both c and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ hardcode_libdir_separator=:
+ ;;
+
+ sco3.2v5*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ export_dynamic_flag_spec='${wl}-Bexport'
+ ;;
+
+ solaris*)
+ # gcc --version < 3.0 without binutils cannot create self contained
+ # shared libraries reliably, requiring libgcc.a to resolve some of
+ # the object symbols generated in some cases. Libraries that use
+ # assert need libgcc.a to resolve __eprintf, for example. Linking
+ # a copy of libgcc.a into every shared library to guarantee resolving
+ # such symbols causes other problems: According to Tim Van Holder
+ # <tim.van.holder@pandora.be>, C++ libraries end up with a separate
+ # (to the application) exception stack for one thing.
+ no_undefined_flag=' -z defs'
+ if test "$GCC" = yes; then
+ case `$CC --version 2>/dev/null` in
+ [[12]].*)
+ cat <<EOF 1>&2
+
+*** Warning: Releases of GCC earlier than version 3.0 cannot reliably
+*** create self contained shared libraries on Solaris systems, without
+*** introducing a dependency on libgcc.a. Therefore, libtool is disabling
+*** -no-undefined support, which will at least allow you to build shared
+*** libraries. However, you may find that when you link such libraries
+*** into an application without using GCC, you have to manually add
+*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to
+*** upgrade to a newer version of GCC. Another option is to rebuild your
+*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer.
+
+EOF
+ no_undefined_flag=
+ ;;
+ esac
+ fi
+ # $CC -shared without GNU ld will not create a library from C++
+ # object files and a static libstdc++, better avoid it by now
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_shlibpath_var=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+ esac
+ link_all_deplibs=yes
+ ;;
+
+ sunos4*)
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4)
+ case $host_vendor in
+ sni)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ reload_cmds='$CC -r -o $output$reload_objs'
+ hardcode_direct=no
+ ;;
+ motorola)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4.3*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ export_dynamic_flag_spec='-Bexport'
+ ;;
+
+ sysv5*)
+ no_undefined_flag=' -z text'
+ # $CC -shared without GNU ld will not create a library from C++
+ # object files and a static libstdc++, better avoid it by now
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+ hardcode_libdir_flag_spec=
+ hardcode_shlibpath_var=no
+ runpath_var='LD_RUN_PATH'
+ ;;
+
+ uts4*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ dgux*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ ld_shlibs=yes
+ fi
+ ;;
+
+ sysv4.2uw2*)
+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_minus_L=no
+ hardcode_shlibpath_var=no
+ hardcode_runpath_var=yes
+ runpath_var=LD_RUN_PATH
+ ;;
+
+ sysv5uw7* | unixware7*)
+ no_undefined_flag='${wl}-z ${wl}text'
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+fi
+AC_MSG_RESULT([$ld_shlibs])
+test "$ld_shlibs" = no && can_build_shared=no
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+# Check hardcoding attributes.
+AC_MSG_CHECKING([how to hardcode library paths into programs])
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" || \
+ test -n "$runpath_var"; then
+
+ # We can hardcode non-existant directories.
+ if test "$hardcode_direct" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$hardcode_shlibpath_var" != no &&
+ test "$hardcode_minus_L" != no; then
+ # Linking always hardcodes the temporary library directory.
+ hardcode_action=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ hardcode_action=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ hardcode_action=unsupported
+fi
+AC_MSG_RESULT([$hardcode_action])
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ AC_MSG_RESULT([yes])
+else
+ AC_MSG_RESULT([no])
+fi
+##
+## END FIXME
+
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+## FIXME: this should be a separate macro
+##
+# PORTME Fill in your ld.so characteristics
+AC_MSG_CHECKING([dynamic linker characteristics])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+
+case $host_os in
+aix3*)
+ version_type=linux
+ library_names_spec='${libname}${release}.so$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}.so$major'
+ ;;
+
+aix4* | aix5*)
+ version_type=linux
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[[01]] | aix4.[[01]].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can
+ # not hardcode correct soname into executable. Probably we can
+ # add versioning support to collect2, so additional links can
+ # be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}.so$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
+ ;;
+
+beos*)
+ library_names_spec='${libname}.so'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi4*)
+ version_type=linux
+ need_version=no
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ export_dynamic_flag_spec=-rdynamic
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32*)
+ version_type=windows
+ need_version=no
+ need_lib_prefix=no
+ case $GCC,$host_os in
+ yes,cygwin*)
+ library_names_spec='$libname.dll.a'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
+ postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog .libs/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $rm \$dlpath'
+ ;;
+ yes,mingw*)
+ library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"`
+ ;;
+ yes,pw32*)
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
+ ;;
+ *)
+ library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ # FIXME: Relying on posixy $() will cause problems for
+ # cross-compilation, but unfortunately the echo tests do not
+ # yet detect zsh echo's removal of \ escapes.
+ library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
+ soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ ;;
+
+freebsd1*)
+ dynamic_linker=no
+ ;;
+
+freebsd*)
+ objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ *)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+gnu*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
+ soname_spec='${libname}${release}.so$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ dynamic_linker="$host_os dld.sl"
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
+ soname_spec='${libname}${release}.sl$major'
+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
+ postinstall_cmds='chmod 555 $lib'
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *) version_type=irix ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}.so$major'
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
+ dynamic_linker=no
+ ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
+ soname_spec='${libname}${release}.so$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+openbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case "$host_os" in
+ openbsd2.[[89]] | openbsd2.[[89]].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+os2*)
+ libname_spec='$name'
+ need_lib_prefix=no
+ library_names_spec='$libname.dll $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_version=no
+ soname_spec='${libname}${release}.so'
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+sco3.2v5*)
+ version_type=osf
+ soname_spec='${libname}${release}.so$major'
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+solaris*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ version_type=linux
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ export_dynamic_flag_spec='${wl}-Blargedynsym'
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+uts4*)
+ version_type=linux
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+dgux*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux
+ library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
+ soname_spec='$libname.so.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test "$dynamic_linker" = no && can_build_shared=no
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+# Report the final consequences.
+AC_MSG_CHECKING([if libtool supports shared libraries])
+AC_MSG_RESULT([$can_build_shared])
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+AC_MSG_CHECKING([whether to build shared libraries])
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case "$host_os" in
+aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+aix4*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+esac
+AC_MSG_RESULT([$enable_shared])
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+AC_MSG_CHECKING([whether to build static libraries])
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+AC_MSG_RESULT([$enable_static])
+##
+## END FIXME
+
+if test "$hardcode_action" = relink; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+AC_LIBTOOL_DLOPEN_SELF
+
+## FIXME: this should be a separate macro
+##
+if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $archive_cmds in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+ AC_CACHE_VAL([lt_cv_archive_cmds_need_lc],
+ [$rm conftest*
+ echo 'static int dummy;' > conftest.$ac_ext
+
+ if AC_TRY_EVAL(ac_compile); then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$lt_cv_prog_cc_wl
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ save_allow_undefined_flag=$allow_undefined_flag
+ allow_undefined_flag=
+ if AC_TRY_EVAL(archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
+ then
+ lt_cv_archive_cmds_need_lc=no
+ else
+ lt_cv_archive_cmds_need_lc=yes
+ fi
+ allow_undefined_flag=$save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi])
+ AC_MSG_RESULT([$lt_cv_archive_cmds_need_lc])
+ ;;
+ esac
+fi
+need_lc=${lt_cv_archive_cmds_need_lc-yes}
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+# The second clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+ :
+else
+ # If there is no Makefile yet, we rely on a make rule to execute
+ # `config.status --recheck' to rerun these tests and create the
+ # libtool script then.
+ test -f Makefile && make "$ltmain"
+fi
+
+if test -f "$ltmain"; then
+ trap "$rm \"${ofile}T\"; exit 1" 1 2 15
+ $rm -f "${ofile}T"
+
+ echo creating $ofile
+
+ # Now quote all the things that may contain metacharacters while being
+ # careful not to overquote the AC_SUBSTed values. We take copies of the
+ # variables and quote the copies for generation of the libtool script.
+ for var in echo old_CC old_CFLAGS SED \
+ AR AR_FLAGS CC LD LN_S NM SHELL \
+ reload_flag reload_cmds wl \
+ pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
+ thread_safe_flag_spec whole_archive_flag_spec libname_spec \
+ library_names_spec soname_spec \
+ RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
+ old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \
+ postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \
+ old_striplib striplib file_magic_cmd export_symbols_cmds \
+ deplibs_check_method allow_undefined_flag no_undefined_flag \
+ finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
+ global_symbol_to_c_name_address \
+ hardcode_libdir_flag_spec hardcode_libdir_separator \
+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+ compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
+
+ case $var in
+ reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
+ old_postinstall_cmds | old_postuninstall_cmds | \
+ export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
+ extract_expsyms_cmds | old_archive_from_expsyms_cmds | \
+ postinstall_cmds | postuninstall_cmds | \
+ finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+ # Double-quote double-evaled strings.
+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+ ;;
+ *)
+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+ ;;
+ esac
+ done
+
+ cat <<__EOF__ > "${ofile}T"
+#! $SHELL
+
+# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+# Copyright (C) 1996-2000 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# A sed that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="${SED} -e s/^X//"
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$need_lc
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# The default C compiler.
+CC=$lt_CC
+
+# Is the compiler the GNU C compiler?
+with_gcc=$GCC
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_wl
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_pic_flag
+pic_mode=$pic_mode
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_compiler_c_o
+
+# Can we write directly to a .lo ?
+compiler_o_lo=$lt_compiler_o_lo
+
+# Must we lock files when doing compilation ?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_link_static_flag
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_no_builtin_flag
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_thread_safe_flag_spec
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names. First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_old_archive_cmds
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# ### END LIBTOOL CONFIG
+
+__EOF__
+
+ case $host_os in
+ aix3*)
+ cat <<\EOF >> "${ofile}T"
+
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+EOF
+ ;;
+ esac
+
+ case $host_os in
+ cygwin* | mingw* | pw32* | os2*)
+ cat <<'EOF' >> "${ofile}T"
+ # This is a source program that is used to create dlls on Windows
+ # Don't remove nor modify the starting and closing comments
+# /* ltdll.c starts here */
+# #define WIN32_LEAN_AND_MEAN
+# #include <windows.h>
+# #undef WIN32_LEAN_AND_MEAN
+# #include <stdio.h>
+#
+# #ifndef __CYGWIN__
+# # ifdef __CYGWIN32__
+# # define __CYGWIN__ __CYGWIN32__
+# # endif
+# #endif
+#
+# #ifdef __cplusplus
+# extern "C" {
+# #endif
+# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
+# #ifdef __cplusplus
+# }
+# #endif
+#
+# #ifdef __CYGWIN__
+# #include <cygwin/cygwin_dll.h>
+# DECLARE_CYGWIN_DLL( DllMain );
+# #endif
+# HINSTANCE __hDllInstance_base;
+#
+# BOOL APIENTRY
+# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
+# {
+# __hDllInstance_base = hInst;
+# return TRUE;
+# }
+# /* ltdll.c ends here */
+ # This is a source program that is used to create import libraries
+ # on Windows for dlls which lack them. Don't remove nor modify the
+ # starting and closing comments
+# /* impgen.c starts here */
+# /* Copyright (C) 1999-2000 Free Software Foundation, Inc.
+#
+# This file is part of GNU libtool.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# */
+#
+# #include <stdio.h> /* for printf() */
+# #include <unistd.h> /* for open(), lseek(), read() */
+# #include <fcntl.h> /* for O_RDONLY, O_BINARY */
+# #include <string.h> /* for strdup() */
+#
+# /* O_BINARY isn't required (or even defined sometimes) under Unix */
+# #ifndef O_BINARY
+# #define O_BINARY 0
+# #endif
+#
+# static unsigned int
+# pe_get16 (fd, offset)
+# int fd;
+# int offset;
+# {
+# unsigned char b[2];
+# lseek (fd, offset, SEEK_SET);
+# read (fd, b, 2);
+# return b[0] + (b[1]<<8);
+# }
+#
+# static unsigned int
+# pe_get32 (fd, offset)
+# int fd;
+# int offset;
+# {
+# unsigned char b[4];
+# lseek (fd, offset, SEEK_SET);
+# read (fd, b, 4);
+# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+# }
+#
+# static unsigned int
+# pe_as32 (ptr)
+# void *ptr;
+# {
+# unsigned char *b = ptr;
+# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+# }
+#
+# int
+# main (argc, argv)
+# int argc;
+# char *argv[];
+# {
+# int dll;
+# unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
+# unsigned long export_rva, export_size, nsections, secptr, expptr;
+# unsigned long name_rvas, nexp;
+# unsigned char *expdata, *erva;
+# char *filename, *dll_name;
+#
+# filename = argv[1];
+#
+# dll = open(filename, O_RDONLY|O_BINARY);
+# if (dll < 1)
+# return 1;
+#
+# dll_name = filename;
+#
+# for (i=0; filename[i]; i++)
+# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':')
+# dll_name = filename + i +1;
+#
+# pe_header_offset = pe_get32 (dll, 0x3c);
+# opthdr_ofs = pe_header_offset + 4 + 20;
+# num_entries = pe_get32 (dll, opthdr_ofs + 92);
+#
+# if (num_entries < 1) /* no exports */
+# return 1;
+#
+# export_rva = pe_get32 (dll, opthdr_ofs + 96);
+# export_size = pe_get32 (dll, opthdr_ofs + 100);
+# nsections = pe_get16 (dll, pe_header_offset + 4 +2);
+# secptr = (pe_header_offset + 4 + 20 +
+# pe_get16 (dll, pe_header_offset + 4 + 16));
+#
+# expptr = 0;
+# for (i = 0; i < nsections; i++)
+# {
+# char sname[8];
+# unsigned long secptr1 = secptr + 40 * i;
+# unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
+# unsigned long vsize = pe_get32 (dll, secptr1 + 16);
+# unsigned long fptr = pe_get32 (dll, secptr1 + 20);
+# lseek(dll, secptr1, SEEK_SET);
+# read(dll, sname, 8);
+# if (vaddr <= export_rva && vaddr+vsize > export_rva)
+# {
+# expptr = fptr + (export_rva - vaddr);
+# if (export_rva + export_size > vaddr + vsize)
+# export_size = vsize - (export_rva - vaddr);
+# break;
+# }
+# }
+#
+# expdata = (unsigned char*)malloc(export_size);
+# lseek (dll, expptr, SEEK_SET);
+# read (dll, expdata, export_size);
+# erva = expdata - export_rva;
+#
+# nexp = pe_as32 (expdata+24);
+# name_rvas = pe_as32 (expdata+32);
+#
+# printf ("EXPORTS\n");
+# for (i = 0; i<nexp; i++)
+# {
+# unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
+# printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
+# }
+#
+# return 0;
+# }
+# /* impgen.c ends here */
+
+EOF
+ ;;
+ esac
+
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+ sed '$q' "$ltmain" >> "${ofile}T" || (rm -f "${ofile}T"; exit 1)
+
+ mv -f "${ofile}T" "$ofile" || \
+ (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T")
+ chmod +x "$ofile"
+fi
+##
+## END FIXME
+
+])# _LT_AC_LTCONFIG_HACK
+
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
+
+# AC_ENABLE_SHARED - implement the --enable-shared flag
+# Usage: AC_ENABLE_SHARED[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN([AC_ENABLE_SHARED],
+[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(shared,
+changequote(<<, >>)dnl
+<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case $enableval in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
+])
+
+# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
+AC_DEFUN([AC_DISABLE_SHARED],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
+
+# AC_ENABLE_STATIC - implement the --enable-static flag
+# Usage: AC_ENABLE_STATIC[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN([AC_ENABLE_STATIC],
+[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(static,
+changequote(<<, >>)dnl
+<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case $enableval in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
+])
+
+# AC_DISABLE_STATIC - set the default static flag to --disable-static
+AC_DEFUN([AC_DISABLE_STATIC],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
+
+
+# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
+# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN([AC_ENABLE_FAST_INSTALL],
+[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(fast-install,
+changequote(<<, >>)dnl
+<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case $enableval in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
+])
+
+# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
+AC_DEFUN([AC_DISABLE_FAST_INSTALL],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
+
+# AC_LIBTOOL_PICMODE - implement the --with-pic flag
+# Usage: AC_LIBTOOL_PICMODE[(MODE)]
+# Where MODE is either `yes' or `no'. If omitted, it defaults to
+# `both'.
+AC_DEFUN([AC_LIBTOOL_PICMODE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+pic_mode=ifelse($#,1,$1,default)])
+
+
+# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
+AC_DEFUN([AC_PATH_TOOL_PREFIX],
+[AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word. This closes a longstanding sh security hole.
+ ac_dummy="ifelse([$2], , $PATH, [$2])"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$1; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ AC_MSG_RESULT($MAGIC_CMD)
+else
+ AC_MSG_RESULT(no)
+fi
+])
+
+
+# AC_PATH_MAGIC - find a file program which can recognise a shared library
+AC_DEFUN([AC_PATH_MAGIC],
+[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
+AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
+ else
+ MAGIC_CMD=:
+ fi
+fi
+])
+
+
+# AC_PROG_LD - find the path to the GNU or non-GNU linker
+AC_DEFUN([AC_PROG_LD],
+[AC_ARG_WITH(gnu-ld,
+[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by GCC])
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [[\\/]]* | [[A-Za-z]]:[[\\/]]*)
+ re_direlt='/[[^/]][[^/]]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_PROG_LD_GNU
+])
+
+# AC_PROG_LD_GNU -
+AC_DEFUN([AC_PROG_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ lt_cv_prog_gnu_ld=yes
+else
+ lt_cv_prog_gnu_ld=no
+fi])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])
+
+# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
+# -- PORTME Some linkers may need a different reload flag.
+AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
+[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
+[lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+test -n "$reload_flag" && reload_flag=" $reload_flag"
+])
+
+# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
+# -- PORTME fill in with the dynamic library characteristics
+AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
+[AC_CACHE_CHECK([how to recognise dependant libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix4* | aix5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi4*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin* | mingw* | pw32*)
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ case "$host_os" in
+ rhapsody* | darwin1.[[012]])
+ lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
+ ;;
+ *) # Darwin 1.3 on
+ lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
+ ;;
+ esac
+ ;;
+
+freebsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20*|hpux11*)
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ irix5* | nonstopux*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+ ;;
+ *)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
+ ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+ case $host_cpu in
+ alpha* | hppa* | i*86 | mips | mipsel | powerpc* | sparc* | ia64*)
+ lt_cv_deplibs_check_method=pass_all ;;
+ *)
+ # glibc up to 2.1.1 does not perform some relocations on ARM
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$'
+ fi
+ ;;
+
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+openbsd*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
+ else
+ lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sco3.2v5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+
+sysv5uw[[78]]* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
+esac
+])
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+])
+
+
+# AC_PROG_NM - find the path to a BSD-compatible name lister
+AC_DEFUN([AC_PROG_NM],
+[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
+AC_MSG_CHECKING([for BSD-compatible nm])
+AC_CACHE_VAL(lt_cv_path_NM,
+[if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm=$ac_dir/${ac_tool_prefix}nm
+ if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ else
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi])
+NM="$lt_cv_path_NM"
+AC_MSG_RESULT([$NM])
+])
+
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN([AC_CHECK_LIBM],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cygwin* | *-*-pw32*)
+ # These system don't have libm
+ ;;
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
+ ;;
+*)
+ AC_CHECK_LIB(m, main, LIBM="-lm")
+ ;;
+esac
+])
+
+# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl convenience library and LTDLINCL to the include flags for
+# the libltdl header and adds --enable-ltdl-convenience to the
+# configure arguments. Note that LIBLTDL and LTDLINCL are not
+# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not
+# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed
+# with '${top_builddir}/' and LTDLINCL will be prefixed with
+# '${top_srcdir}/' (note the single quotes!). If your package is not
+# flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
+AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ case $enable_ltdl_convenience in
+ no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+ "") enable_ltdl_convenience=yes
+ ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+ esac
+ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
+ LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+ # For backwards non-gettext consistent compatibility...
+ INCLTDL="$LTDLINCL"
+])
+
+# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl installable library and LTDLINCL to the include flags for
+# the libltdl header and adds --enable-ltdl-install to the configure
+# arguments. Note that LIBLTDL and LTDLINCL are not AC_SUBSTed, nor is
+# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed
+# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will
+# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed
+# with '${top_srcdir}/' (note the single quotes!). If your package is
+# not flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ AC_CHECK_LIB(ltdl, main,
+ [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+ [if test x"$enable_ltdl_install" = xno; then
+ AC_MSG_WARN([libltdl not installed, but installation disabled])
+ else
+ enable_ltdl_install=yes
+ fi
+ ])
+ if test x"$enable_ltdl_install" = x"yes"; then
+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
+ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
+ LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+ else
+ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+ LIBLTDL="-lltdl"
+ LTDLINCL=
+ fi
+ # For backwards non-gettext consistent compatibility...
+ INCLTDL="$LTDLINCL"
+])
+
+# old names
+AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
+AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
+AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
+
+# This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])
+
+############################################################
+# NOTE: This macro has been submitted for inclusion into #
+# GNU Autoconf as AC_PROG_SED. When it is available in #
+# a released version of Autoconf we should remove this #
+# macro and use it instead. #
+############################################################
+# LT_AC_PROG_SED
+# --------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible. Prefer GNU sed if found.
+AC_DEFUN([LT_AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_executable_p="test -f"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext"
+ fi
+ done
+ done
+done
+
+ # Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+ trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+: ${TMPDIR=/tmp}
+{
+ tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` &&
+ test -n "$tmp" && test -d "$tmp"
+} ||
+{
+ tmp=$TMPDIR/sed$$-$RANDOM
+ (umask 077 && mkdir $tmp)
+} ||
+{
+ echo "$me: cannot create a temporary directory in $TMPDIR" >&2
+ { (exit 1); exit 1; }
+}
+ _max=0
+ _count=0
+ # Add /usr/xpg4/bin/sed as it is typically found on Solaris
+ # along with /bin/sed that truncates output.
+ for _sed in $_sed_list /usr/xpg4/bin/sed; do
+ test ! -f ${_sed} && break
+ cat /dev/null > "$tmp/sed.in"
+ _count=0
+ echo ${ECHO_N-$ac_n} "0123456789${ECHO_C-$ac_c}" >"$tmp/sed.in"
+ # Check for GNU sed and select it if it is found.
+ if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then
+ lt_cv_path_SED=${_sed}
+ break;
+ fi
+ while true; do
+ cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp"
+ mv "$tmp/sed.tmp" "$tmp/sed.in"
+ cp "$tmp/sed.in" "$tmp/sed.nl"
+ echo >>"$tmp/sed.nl"
+ ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break
+ cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break
+ # 40000 chars as input seems more than enough
+ test $_count -gt 10 && break
+ _count=`expr $_count + 1`
+ if test $_count -gt $_max; then
+ _max=$_count
+ lt_cv_path_SED=$_sed
+ fi
+ done
+ done
+ rm -rf "$tmp"
+])
+if test "X$SED" != "X"; then
+ lt_cv_path_SED=$SED
+else
+ SED=$lt_cv_path_SED
+fi
+AC_MSG_RESULT([$SED])
+])
projects / gpgme.git / commitdiff