+++ /dev/null
-From 8ffb7265af64ec81748335ec8f20e7ab542c3850 Mon Sep 17 00:00:00 2001
-From: Prasad J Pandit <pjp@fedoraproject.org>
-Date: Tue, 24 Mar 2020 22:57:22 +0530
-Subject: [PATCH] net: tulip: check frame size and r/w data length
-
-Tulip network driver while copying tx/rx buffers does not check
-frame size against r/w data length. This may lead to OOB buffer
-access. Add check to avoid it.
-
-Limit iterations over descriptors to avoid potential infinite
-loop issue in tulip_xmit_list_update.
-
-Reported-by: Li Qiang <pangpei.lq@antfin.com>
-Reported-by: Ziming Zhang <ezrakiez@gmail.com>
-Reported-by: Jason Wang <jasowang@redhat.com>
-Tested-by: Li Qiang <liq3ea@gmail.com>
-Reviewed-by: Li Qiang <liq3ea@gmail.com>
-Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
-Signed-off-by: Jason Wang <jasowang@redhat.com>
----
- hw/net/tulip.c | 36 +++++++++++++++++++++++++++---------
- 1 file changed, 27 insertions(+), 9 deletions(-)
-
-diff --git a/hw/net/tulip.c b/hw/net/tulip.c
-index cfac2719d3..1295f51d07 100644
---- a/hw/net/tulip.c
-+++ b/hw/net/tulip.c
-@@ -170,6 +170,10 @@ static void tulip_copy_rx_bytes(TULIPState *s, struct tulip_descriptor *desc)
- } else {
- len = s->rx_frame_len;
- }
-+
-+ if (s->rx_frame_len + len > sizeof(s->rx_frame)) {
-+ return;
-+ }
- pci_dma_write(&s->dev, desc->buf_addr1, s->rx_frame +
- (s->rx_frame_size - s->rx_frame_len), len);
- s->rx_frame_len -= len;
-@@ -181,6 +185,10 @@ static void tulip_copy_rx_bytes(TULIPState *s, struct tulip_descriptor *desc)
- } else {
- len = s->rx_frame_len;
- }
-+
-+ if (s->rx_frame_len + len > sizeof(s->rx_frame)) {
-+ return;
-+ }
- pci_dma_write(&s->dev, desc->buf_addr2, s->rx_frame +
- (s->rx_frame_size - s->rx_frame_len), len);
- s->rx_frame_len -= len;
-@@ -227,7 +235,8 @@ static ssize_t tulip_receive(TULIPState *s, const uint8_t *buf, size_t size)
-
- trace_tulip_receive(buf, size);
-
-- if (size < 14 || size > 2048 || s->rx_frame_len || tulip_rx_stopped(s)) {
-+ if (size < 14 || size > sizeof(s->rx_frame) - 4
-+ || s->rx_frame_len || tulip_rx_stopped(s)) {
- return 0;
- }
-
-@@ -275,7 +284,6 @@ static ssize_t tulip_receive_nc(NetClientState *nc,
- return tulip_receive(qemu_get_nic_opaque(nc), buf, size);
- }
-
--
- static NetClientInfo net_tulip_info = {
- .type = NET_CLIENT_DRIVER_NIC,
- .size = sizeof(NICState),
-@@ -558,7 +566,7 @@ static void tulip_tx(TULIPState *s, struct tulip_descriptor *desc)
- if ((s->csr[6] >> CSR6_OM_SHIFT) & CSR6_OM_MASK) {
- /* Internal or external Loopback */
- tulip_receive(s, s->tx_frame, s->tx_frame_len);
-- } else {
-+ } else if (s->tx_frame_len <= sizeof(s->tx_frame)) {
- qemu_send_packet(qemu_get_queue(s->nic),
- s->tx_frame, s->tx_frame_len);
- }
-@@ -570,23 +578,31 @@ static void tulip_tx(TULIPState *s, struct tulip_descriptor *desc)
- }
- }
-
--static void tulip_copy_tx_buffers(TULIPState *s, struct tulip_descriptor *desc)
-+static int tulip_copy_tx_buffers(TULIPState *s, struct tulip_descriptor *desc)
- {
- int len1 = (desc->control >> TDES1_BUF1_SIZE_SHIFT) & TDES1_BUF1_SIZE_MASK;
- int len2 = (desc->control >> TDES1_BUF2_SIZE_SHIFT) & TDES1_BUF2_SIZE_MASK;
-
-+ if (s->tx_frame_len + len1 > sizeof(s->tx_frame)) {
-+ return -1;
-+ }
- if (len1) {
- pci_dma_read(&s->dev, desc->buf_addr1,
- s->tx_frame + s->tx_frame_len, len1);
- s->tx_frame_len += len1;
- }
-
-+ if (s->tx_frame_len + len2 > sizeof(s->tx_frame)) {
-+ return -1;
-+ }
- if (len2) {
- pci_dma_read(&s->dev, desc->buf_addr2,
- s->tx_frame + s->tx_frame_len, len2);
- s->tx_frame_len += len2;
- }
- desc->status = (len1 + len2) ? 0 : 0x7fffffff;
-+
-+ return 0;
- }
-
- static void tulip_setup_filter_addr(TULIPState *s, uint8_t *buf, int n)
-@@ -651,13 +667,15 @@ static uint32_t tulip_ts(TULIPState *s)
-
- static void tulip_xmit_list_update(TULIPState *s)
- {
-+#define TULIP_DESC_MAX 128
-+ uint8_t i = 0;
- struct tulip_descriptor desc;
-
- if (tulip_ts(s) != CSR5_TS_SUSPENDED) {
- return;
- }
-
-- for (;;) {
-+ for (i = 0; i < TULIP_DESC_MAX; i++) {
- tulip_desc_read(s, s->current_tx_desc, &desc);
- tulip_dump_tx_descriptor(s, &desc);
-
-@@ -675,10 +693,10 @@ static void tulip_xmit_list_update(TULIPState *s)
- s->tx_frame_len = 0;
- }
-
-- tulip_copy_tx_buffers(s, &desc);
--
-- if (desc.control & TDES1_LS) {
-- tulip_tx(s, &desc);
-+ if (!tulip_copy_tx_buffers(s, &desc)) {
-+ if (desc.control & TDES1_LS) {
-+ tulip_tx(s, &desc);
-+ }
- }
- }
- tulip_desc_write(s, s->current_tx_desc, &desc);
---
-2.24.1
-
+++ /dev/null
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="7"
-
-PYTHON_COMPAT=( python{3_6,3_7} )
-PYTHON_REQ_USE="ncurses,readline"
-
-PLOCALES="bg de_DE fr_FR hu it tr zh_CN"
-
-FIRMWARE_ABI_VERSION="4.0.0-r50"
-
-inherit eutils linux-info toolchain-funcs multilib python-r1 \
- udev fcaps readme.gentoo-r1 pax-utils l10n xdg-utils
-
-if [[ ${PV} = *9999* ]]; then
- EGIT_REPO_URI="https://git.qemu.org/git/qemu.git"
- EGIT_SUBMODULES=(
- slirp
- tests/fp/berkeley-{test,soft}float-3
- ui/keycodemapdb
- )
- inherit git-r3
- SRC_URI=""
-else
- SRC_URI="https://download.qemu.org/${P}.tar.xz
- https://dev.gentoo.org/~tamiko/distfiles/${P}-patches-r1.tar.xz"
- KEYWORDS="amd64 ~arm64 ~ppc ~ppc64 x86"
-fi
-
-DESCRIPTION="QEMU + Kernel-based Virtual Machine userland tools"
-HOMEPAGE="http://www.qemu.org http://www.linux-kvm.org"
-
-LICENSE="GPL-2 LGPL-2 BSD-2"
-SLOT="0"
-
-IUSE="accessibility +aio alsa bzip2 capstone +caps +curl debug doc
- +fdt glusterfs gnutls gtk infiniband iscsi jemalloc +jpeg kernel_linux
- kernel_FreeBSD lzo ncurses nfs nls numa opengl +oss +pin-upstream-blobs
- plugins +png pulseaudio python rbd sasl +seccomp sdl sdl-image selinux
- smartcard snappy spice ssh static static-user systemtap tci test usb
- usbredir vde +vhost-net vhost-user-fs virgl virtfs +vnc vte xattr xen
- xfs +xkb"
-
-COMMON_TARGETS="aarch64 alpha arm cris hppa i386 m68k microblaze microblazeel
- mips mips64 mips64el mipsel nios2 or1k ppc ppc64 riscv32 riscv64 s390x
- sh4 sh4eb sparc sparc64 x86_64 xtensa xtensaeb"
-IUSE_SOFTMMU_TARGETS="${COMMON_TARGETS}
- lm32 moxie tricore unicore32"
-IUSE_USER_TARGETS="${COMMON_TARGETS}
- aarch64_be armeb mipsn32 mipsn32el ppc64abi32 ppc64le sparc32plus
- tilegx"
-
-use_softmmu_targets=$(printf ' qemu_softmmu_targets_%s' ${IUSE_SOFTMMU_TARGETS})
-use_user_targets=$(printf ' qemu_user_targets_%s' ${IUSE_USER_TARGETS})
-IUSE+=" ${use_softmmu_targets} ${use_user_targets}"
-
-RESTRICT="!test? ( test )"
-# Allow no targets to be built so that people can get a tools-only build.
-# Block USE flag configurations known to not work.
-REQUIRED_USE="${PYTHON_REQUIRED_USE}
- qemu_softmmu_targets_arm? ( fdt )
- qemu_softmmu_targets_microblaze? ( fdt )
- qemu_softmmu_targets_mips64el? ( fdt )
- qemu_softmmu_targets_ppc64? ( fdt )
- qemu_softmmu_targets_ppc? ( fdt )
- qemu_softmmu_targets_riscv32? ( fdt )
- qemu_softmmu_targets_riscv64? ( fdt )
- static? ( static-user !alsa !gtk !opengl !pulseaudio !plugins !rbd !snappy )
- static-user? ( !plugins )
- virtfs? ( xattr )
- vte? ( gtk )
- plugins? ( !static !static-user )
-"
-
-# Dependencies required for qemu tools (qemu-nbd, qemu-img, qemu-io, ...)
-# and user/softmmu targets (qemu-*, qemu-system-*).
-#
-# Yep, you need both libcap and libcap-ng since virtfs only uses libcap.
-#
-# The attr lib isn't always linked in (although the USE flag is always
-# respected). This is because qemu supports using the C library's API
-# when available rather than always using the external library.
-ALL_DEPEND="
- >=dev-libs/glib-2.0[static-libs(+)]
- sys-libs/zlib[static-libs(+)]
- python? ( ${PYTHON_DEPS} )
- systemtap? ( dev-util/systemtap )
- xattr? ( sys-apps/attr[static-libs(+)] )"
-
-# Dependencies required for qemu tools (qemu-nbd, qemu-img, qemu-io, ...)
-# softmmu targets (qemu-system-*).
-SOFTMMU_TOOLS_DEPEND="
- dev-libs/libxml2[static-libs(+)]
- xkb? ( x11-libs/libxkbcommon[static-libs(+)] )
- >=x11-libs/pixman-0.28.0[static-libs(+)]
- accessibility? (
- app-accessibility/brltty[api]
- app-accessibility/brltty[static-libs(+)]
- )
- aio? ( dev-libs/libaio[static-libs(+)] )
- alsa? ( >=media-libs/alsa-lib-1.0.13 )
- bzip2? ( app-arch/bzip2[static-libs(+)] )
- capstone? ( dev-libs/capstone:= )
- caps? ( sys-libs/libcap-ng[static-libs(+)] )
- curl? ( >=net-misc/curl-7.15.4[static-libs(+)] )
- fdt? ( >=sys-apps/dtc-1.5.0[static-libs(+)] )
- glusterfs? ( >=sys-cluster/glusterfs-3.4.0[static-libs(+)] )
- gnutls? (
- dev-libs/nettle:=[static-libs(+)]
- >=net-libs/gnutls-3.0:=[static-libs(+)]
- )
- gtk? (
- x11-libs/gtk+:3
- vte? ( x11-libs/vte:2.91 )
- )
- infiniband? (
- sys-fabric/libibumad:=[static-libs(+)]
- sys-fabric/libibverbs:=[static-libs(+)]
- sys-fabric/librdmacm:=[static-libs(+)]
- )
- iscsi? ( net-libs/libiscsi )
- jemalloc? ( dev-libs/jemalloc )
- jpeg? ( virtual/jpeg:0=[static-libs(+)] )
- lzo? ( dev-libs/lzo:2[static-libs(+)] )
- ncurses? (
- sys-libs/ncurses:0=[unicode]
- sys-libs/ncurses:0=[static-libs(+)]
- )
- nfs? ( >=net-fs/libnfs-1.9.3:=[static-libs(+)] )
- numa? ( sys-process/numactl[static-libs(+)] )
- opengl? (
- virtual/opengl
- media-libs/libepoxy[static-libs(+)]
- media-libs/mesa[static-libs(+)]
- media-libs/mesa[egl,gbm]
- )
- png? ( media-libs/libpng:0=[static-libs(+)] )
- pulseaudio? ( media-sound/pulseaudio )
- rbd? ( sys-cluster/ceph )
- sasl? ( dev-libs/cyrus-sasl[static-libs(+)] )
- sdl? (
- media-libs/libsdl2[X]
- media-libs/libsdl2[static-libs(+)]
- )
- sdl-image? ( media-libs/sdl2-image[static-libs(+)] )
- seccomp? ( >=sys-libs/libseccomp-2.1.0[static-libs(+)] )
- smartcard? ( >=app-emulation/libcacard-2.5.0[static-libs(+)] )
- snappy? ( app-arch/snappy:= )
- spice? (
- >=app-emulation/spice-protocol-0.12.3
- >=app-emulation/spice-0.12.0[static-libs(+)]
- )
- ssh? ( >=net-libs/libssh-0.8.6[static-libs(+)] )
- usb? ( >=virtual/libusb-1-r2[static-libs(+)] )
- usbredir? ( >=sys-apps/usbredir-0.6[static-libs(+)] )
- vde? ( net-misc/vde[static-libs(+)] )
- virgl? ( media-libs/virglrenderer[static-libs(+)] )
- virtfs? ( sys-libs/libcap )
- xen? ( app-emulation/xen-tools:= )
- xfs? ( sys-fs/xfsprogs[static-libs(+)] )"
-
-X86_FIRMWARE_DEPEND="
- pin-upstream-blobs? (
- ~sys-firmware/edk2-ovmf-201905[binary]
- ~sys-firmware/ipxe-1.0.0_p20190728[binary]
- ~sys-firmware/seabios-1.12.0[binary,seavgabios]
- ~sys-firmware/sgabios-0.1_pre8[binary]
- )
- !pin-upstream-blobs? (
- sys-firmware/edk2-ovmf
- sys-firmware/ipxe
- >=sys-firmware/seabios-1.10.2[seavgabios]
- sys-firmware/sgabios
- )"
-PPC64_FIRMWARE_DEPEND="
- pin-upstream-blobs? (
- ~sys-firmware/seabios-1.12.0[binary,seavgabios]
- )
- !pin-upstream-blobs? (
- >=sys-firmware/seabios-1.10.2[seavgabios]
- )
-"
-
-BDEPEND="
- $(python_gen_impl_dep)
- dev-lang/perl
- sys-apps/texinfo
- virtual/pkgconfig
- doc? ( dev-python/sphinx )
- gtk? ( nls? ( sys-devel/gettext ) )
- test? (
- dev-libs/glib[utils]
- sys-devel/bc
- )
-"
-CDEPEND="
- !static? (
- ${ALL_DEPEND//\[static-libs(+)]}
- ${SOFTMMU_TOOLS_DEPEND//\[static-libs(+)]}
- )
- qemu_softmmu_targets_i386? ( ${X86_FIRMWARE_DEPEND} )
- qemu_softmmu_targets_x86_64? ( ${X86_FIRMWARE_DEPEND} )
- qemu_softmmu_targets_ppc64? ( ${PPC64_FIRMWARE_DEPEND} )
-"
-DEPEND="${CDEPEND}
- kernel_linux? ( >=sys-kernel/linux-headers-2.6.35 )
- static? (
- ${ALL_DEPEND}
- ${SOFTMMU_TOOLS_DEPEND}
- )
- static-user? ( ${ALL_DEPEND} )"
-RDEPEND="${CDEPEND}
- acct-group/kvm
- selinux? ( sec-policy/selinux-qemu )"
-
-PATCHES=(
- "${FILESDIR}"/${PN}-2.5.0-cflags.patch
- "${FILESDIR}"/${PN}-2.5.0-sysmacros.patch
- "${FILESDIR}"/${PN}-2.11.1-capstone_include_path.patch
- "${FILESDIR}"/${PN}-4.0.0-sanitize-interp_info.patch
- "${FILESDIR}"/${PN}-4.0.0-mkdir_systemtap.patch #684902
- "${WORKDIR}"/patches
-)
-
-QA_PREBUILT="
- usr/share/qemu/hppa-firmware.img
- usr/share/qemu/openbios-ppc
- usr/share/qemu/openbios-sparc64
- usr/share/qemu/openbios-sparc32
- usr/share/qemu/palcode-clipper
- usr/share/qemu/s390-ccw.img
- usr/share/qemu/s390-netboot.img
- usr/share/qemu/u-boot.e500"
-
-QA_WX_LOAD="usr/bin/qemu-i386
- usr/bin/qemu-x86_64
- usr/bin/qemu-alpha
- usr/bin/qemu-arm
- usr/bin/qemu-cris
- usr/bin/qemu-m68k
- usr/bin/qemu-microblaze
- usr/bin/qemu-microblazeel
- usr/bin/qemu-mips
- usr/bin/qemu-mipsel
- usr/bin/qemu-or1k
- usr/bin/qemu-ppc
- usr/bin/qemu-ppc64
- usr/bin/qemu-ppc64abi32
- usr/bin/qemu-sh4
- usr/bin/qemu-sh4eb
- usr/bin/qemu-sparc
- usr/bin/qemu-sparc64
- usr/bin/qemu-armeb
- usr/bin/qemu-sparc32plus
- usr/bin/qemu-s390x
- usr/bin/qemu-unicore32"
-
-DOC_CONTENTS="If you don't have kvm compiled into the kernel, make sure you have the
-kernel module loaded before running kvm. The easiest way to ensure that the
-kernel module is loaded is to load it on boot.
- For AMD CPUs the module is called 'kvm-amd'.
- For Intel CPUs the module is called 'kvm-intel'.
-Please review /etc/conf.d/modules for how to load these.
-
-Make sure your user is in the 'kvm' group. Just run
- $ gpasswd -a <USER> kvm
-then have <USER> re-login.
-
-For brand new installs, the default permissions on /dev/kvm might not let
-you access it. You can tell udev to reset ownership/perms:
- $ udevadm trigger -c add /dev/kvm
-
-If you want to register binfmt handlers for qemu user targets:
-For openrc:
- # rc-update add qemu-binfmt
-For systemd:
- # ln -s /usr/share/qemu/binfmt.d/qemu.conf /etc/binfmt.d/qemu.conf"
-
-pkg_pretend() {
- if use kernel_linux && kernel_is lt 2 6 25; then
- eerror "This version of KVM requres a host kernel of 2.6.25 or higher."
- elif use kernel_linux; then
- if ! linux_config_exists; then
- eerror "Unable to check your kernel for KVM support"
- else
- CONFIG_CHECK="~KVM ~TUN ~BRIDGE"
- ERROR_KVM="You must enable KVM in your kernel to continue"
- ERROR_KVM_AMD="If you have an AMD CPU, you must enable KVM_AMD in"
- ERROR_KVM_AMD+=" your kernel configuration."
- ERROR_KVM_INTEL="If you have an Intel CPU, you must enable"
- ERROR_KVM_INTEL+=" KVM_INTEL in your kernel configuration."
- ERROR_TUN="You will need the Universal TUN/TAP driver compiled"
- ERROR_TUN+=" into your kernel or loaded as a module to use the"
- ERROR_TUN+=" virtual network device if using -net tap."
- ERROR_BRIDGE="You will also need support for 802.1d"
- ERROR_BRIDGE+=" Ethernet Bridging for some network configurations."
- use vhost-net && CONFIG_CHECK+=" ~VHOST_NET"
- ERROR_VHOST_NET="You must enable VHOST_NET to have vhost-net"
- ERROR_VHOST_NET+=" support"
-
- if use amd64 || use x86 || use amd64-linux || use x86-linux; then
- if grep -q AuthenticAMD /proc/cpuinfo; then
- CONFIG_CHECK+=" ~KVM_AMD"
- elif grep -q GenuineIntel /proc/cpuinfo; then
- CONFIG_CHECK+=" ~KVM_INTEL"
- fi
- fi
-
- use python && CONFIG_CHECK+=" ~DEBUG_FS"
- ERROR_DEBUG_FS="debugFS support required for kvm_stat"
-
- # Now do the actual checks setup above
- check_extra_config
- fi
- fi
-
- if grep -qs '/usr/bin/qemu-kvm' "${EROOT}"/etc/libvirt/qemu/*.xml; then
- eerror "The kvm/qemu-kvm wrappers no longer exist, but your libvirt"
- eerror "instances are still pointing to it. Please update your"
- eerror "configs in /etc/libvirt/qemu/ to use the -enable-kvm flag"
- eerror "and the right system binary (e.g. qemu-system-x86_64)."
- die "update your virt configs to not use qemu-kvm"
- fi
-}
-
-# Sanity check to make sure target lists are kept up-to-date.
-check_targets() {
- local var=$1 mak=$2
- local detected sorted
-
- pushd "${S}"/default-configs >/dev/null || die
-
- # Force C locale until glibc is updated. #564936
- detected=$(echo $(printf '%s\n' *-${mak}.mak | sed "s:-${mak}.mak::" | LC_COLLATE=C sort -u))
- sorted=$(echo $(printf '%s\n' ${!var} | LC_COLLATE=C sort -u))
- if [[ ${sorted} != "${detected}" ]] ; then
- eerror "The ebuild needs to be kept in sync."
- eerror "${var}: ${sorted}"
- eerror "$(printf '%-*s' ${#var} configure): ${detected}"
- die "sync ${var} to the list of targets"
- fi
-
- popd >/dev/null
-}
-
-handle_locales() {
- # Make sure locale list is kept up-to-date.
- local detected sorted
- detected=$(echo $(cd po && printf '%s\n' *.po | grep -v messages.po | sed 's:.po$::' | sort -u))
- sorted=$(echo $(printf '%s\n' ${PLOCALES} | sort -u))
- if [[ ${sorted} != "${detected}" ]] ; then
- eerror "The ebuild needs to be kept in sync."
- eerror "PLOCALES: ${sorted}"
- eerror " po/*.po: ${detected}"
- die "sync PLOCALES"
- fi
-
- # Deal with selective install of locales.
- if use nls ; then
- # Delete locales the user does not want. #577814
- rm_loc() { rm po/$1.po || die; }
- l10n_for_each_disabled_locale_do rm_loc
- else
- # Cheap hack to disable gettext .mo generation.
- rm -f po/*.po
- fi
-}
-
-src_prepare() {
- check_targets IUSE_SOFTMMU_TARGETS softmmu
- check_targets IUSE_USER_TARGETS linux-user
-
- default
-
- # Use correct toolchain to fix cross-compiling
- tc-export AR LD NM OBJCOPY PKG_CONFIG
- export WINDRES=${CHOST}-windres
-
- # Verbose builds
- MAKEOPTS+=" V=1"
-
- # Run after we've applied all patches.
- handle_locales
-
- # Remove bundled copy of libfdt
- rm -r dtc || die
-}
-
-##
-# configures qemu based on the build directory and the build type
-# we are using.
-#
-qemu_src_configure() {
- debug-print-function ${FUNCNAME} "$@"
-
- local buildtype=$1
- local builddir="${S}/${buildtype}-build"
-
- mkdir "${builddir}"
-
- local conf_opts=(
- --prefix=/usr
- --sysconfdir=/etc
- --bindir=/usr/bin
- --libdir=/usr/$(get_libdir)
- --datadir=/usr/share
- --docdir=/usr/share/doc/${PF}/html
- --mandir=/usr/share/man
- --with-confsuffix=/qemu
- --localstatedir=/var
- --disable-bsd-user
- --disable-guest-agent
- --disable-strip
- --disable-werror
- # We support gnutls/nettle for crypto operations. It is possible
- # to use gcrypt when gnutls/nettle are disabled (but not when they
- # are enabled), but it's not really worth the hassle. Disable it
- # all the time to avoid automatically detecting it. #568856
- --disable-gcrypt
- --python="${PYTHON}"
- --cc="$(tc-getCC)"
- --cxx="$(tc-getCXX)"
- --host-cc="$(tc-getBUILD_CC)"
- $(use_enable debug debug-info)
- $(use_enable debug debug-tcg)
- $(use_enable doc docs)
- $(use_enable plugins)
- $(use_enable tci tcg-interpreter)
- $(use_enable xattr attr)
- )
-
- # Disable options not used by user targets. This simplifies building
- # static user targets (USE=static-user) considerably.
- conf_notuser() {
- if [[ ${buildtype} == "user" ]] ; then
- echo "--disable-${2:-$1}"
- else
- use_enable "$@"
- fi
- }
- conf_opts+=(
- --disable-bluez
- $(conf_notuser accessibility brlapi)
- $(conf_notuser aio linux-aio)
- $(conf_notuser bzip2)
- $(conf_notuser capstone)
- $(conf_notuser caps cap-ng)
- $(conf_notuser curl)
- $(conf_notuser fdt)
- $(conf_notuser glusterfs)
- $(conf_notuser gnutls)
- $(conf_notuser gnutls nettle)
- $(conf_notuser gtk)
- $(conf_notuser infiniband rdma)
- $(conf_notuser iscsi libiscsi)
- $(conf_notuser jemalloc jemalloc)
- $(conf_notuser jpeg vnc-jpeg)
- $(conf_notuser kernel_linux kvm)
- $(conf_notuser lzo)
- $(conf_notuser ncurses curses)
- $(conf_notuser nfs libnfs)
- $(conf_notuser numa)
- $(conf_notuser opengl)
- $(conf_notuser png vnc-png)
- $(conf_notuser rbd)
- $(conf_notuser sasl vnc-sasl)
- $(conf_notuser sdl)
- $(conf_notuser sdl-image)
- $(conf_notuser seccomp)
- $(conf_notuser smartcard)
- $(conf_notuser snappy)
- $(conf_notuser spice)
- $(conf_notuser ssh libssh)
- $(conf_notuser usb libusb)
- $(conf_notuser usbredir usb-redir)
- $(conf_notuser vde)
- $(conf_notuser vhost-net)
- $(conf_notuser vhost-user-fs)
- $(conf_notuser virgl virglrenderer)
- $(conf_notuser virtfs)
- $(conf_notuser vnc)
- $(conf_notuser vte)
- $(conf_notuser xen)
- $(conf_notuser xen xen-pci-passthrough)
- $(conf_notuser xfs xfsctl)
- $(conf_notuser xkb xkbcommon)
- )
-
- if [[ ${buildtype} == "user" ]] ; then
- conf_opts+=( --disable-libxml2 )
- else
- conf_opts+=( --enable-libxml2 )
- fi
-
- if [[ ! ${buildtype} == "user" ]] ; then
- # audio options
- local audio_opts=(
- $(usex pulseaudio pa "")
- $(usev sdl)
- $(usev alsa)
- $(usev oss)
- )
- conf_opts+=(
- --audio-drv-list=$(printf "%s," "${audio_opts[@]}")
- )
- fi
-
- case ${buildtype} in
- user)
- conf_opts+=(
- --enable-linux-user
- --disable-system
- --disable-blobs
- --disable-tools
- )
- local static_flag="static-user"
- ;;
- softmmu)
- conf_opts+=(
- --disable-linux-user
- --enable-system
- --disable-tools
- )
- local static_flag="static"
- ;;
- tools)
- conf_opts+=(
- --disable-linux-user
- --disable-system
- --disable-blobs
- --enable-tools
- )
- local static_flag="static"
- ;;
- esac
-
- local targets="${buildtype}_targets"
- [[ -n ${targets} ]] && conf_opts+=( --target-list="${!targets}" )
-
- # Add support for SystemTAP
- use systemtap && conf_opts+=( --enable-trace-backend=dtrace )
-
- # We always want to attempt to build with PIE support as it results
- # in a more secure binary. But it doesn't work with static or if
- # the current GCC doesn't have PIE support.
- if use ${static_flag}; then
- conf_opts+=( --static --disable-pie )
- else
- tc-enables-pie && conf_opts+=( --enable-pie )
- fi
-
- echo "../configure ${conf_opts[*]}"
- cd "${builddir}"
- ../configure "${conf_opts[@]}" || die "configure failed"
-
- # FreeBSD's kernel does not support QEMU assigning/grabbing
- # host USB devices yet
- use kernel_FreeBSD && \
- sed -i -E -e "s|^(HOST_USB=)bsd|\1stub|" "${S}"/config-host.mak
-}
-
-src_configure() {
- local target
-
- python_setup
-
- softmmu_targets= softmmu_bins=()
- user_targets= user_bins=()
-
- for target in ${IUSE_SOFTMMU_TARGETS} ; do
- if use "qemu_softmmu_targets_${target}"; then
- softmmu_targets+=",${target}-softmmu"
- softmmu_bins+=( "qemu-system-${target}" )
- fi
- done
-
- for target in ${IUSE_USER_TARGETS} ; do
- if use "qemu_user_targets_${target}"; then
- user_targets+=",${target}-linux-user"
- user_bins+=( "qemu-${target}" )
- fi
- done
-
- softmmu_targets=${softmmu_targets#,}
- user_targets=${user_targets#,}
-
- [[ -n ${softmmu_targets} ]] && qemu_src_configure "softmmu"
- [[ -n ${user_targets} ]] && qemu_src_configure "user"
- qemu_src_configure "tools"
-}
-
-src_compile() {
- if [[ -n ${user_targets} ]]; then
- cd "${S}/user-build"
- default
- fi
-
- if [[ -n ${softmmu_targets} ]]; then
- cd "${S}/softmmu-build"
- default
- fi
-
- cd "${S}/tools-build"
- default
-}
-
-src_test() {
- if [[ -n ${softmmu_targets} ]]; then
- cd "${S}/softmmu-build"
- pax-mark m */qemu-system-* #515550
- emake -j1 check
- fi
-}
-
-qemu_python_install() {
- python_domodule "${S}/python/qemu"
-
- python_doscript "${S}/scripts/kvm/vmxcap"
- python_doscript "${S}/scripts/qmp/qmp-shell"
- python_doscript "${S}/scripts/qmp/qemu-ga-client"
-}
-
-# Generate binfmt support files.
-# - /etc/init.d/qemu-binfmt script which registers the user handlers (openrc)
-# - /usr/share/qemu/binfmt.d/qemu.conf (for use with systemd-binfmt)
-generate_initd() {
- local out="${T}/qemu-binfmt"
- local out_systemd="${T}/qemu.conf"
- local d="${T}/binfmt.d"
-
- einfo "Generating qemu binfmt scripts and configuration files"
-
- # Generate the debian fragments first.
- mkdir -p "${d}"
- "${S}"/scripts/qemu-binfmt-conf.sh \
- --debian \
- --exportdir "${d}" \
- --qemu-path "${EPREFIX}/usr/bin" \
- || die
- # Then turn the fragments into a shell script we can source.
- sed -E -i \
- -e 's:^([^ ]+) (.*)$:\1="\2":' \
- "${d}"/* || die
-
- # Generate the init.d script by assembling the fragments from above.
- local f qcpu package interpreter magic mask
- cat "${FILESDIR}"/qemu-binfmt.initd.head >"${out}" || die
- for f in "${d}"/qemu-* ; do
- source "${f}"
-
- # Normalize the cpu logic like we do in the init.d for the native cpu.
- qcpu=${package#qemu-}
- case ${qcpu} in
- arm*) qcpu="arm";;
- mips*) qcpu="mips";;
- ppc*) qcpu="ppc";;
- s390*) qcpu="s390";;
- sh*) qcpu="sh";;
- sparc*) qcpu="sparc";;
- esac
-
- # we use 'printf' here to be portable across 'sh'
- # implementations: #679168
- cat <<EOF >>"${out}"
- if [ "\${cpu}" != "${qcpu}" -a -x "${interpreter}" ] ; then
- printf '%s\n' ':${package}:M::${magic}:${mask}:${interpreter}:'"\${QEMU_BINFMT_FLAGS}" >/proc/sys/fs/binfmt_misc/register
- fi
-EOF
-
- echo ":${package}:M::${magic}:${mask}:${interpreter}:OC" >>"${out_systemd}"
-
- done
- cat "${FILESDIR}"/qemu-binfmt.initd.tail >>"${out}" || die
-}
-
-src_install() {
- if [[ -n ${user_targets} ]]; then
- cd "${S}/user-build"
- emake DESTDIR="${ED}" install
-
- # Install binfmt handler init script for user targets.
- generate_initd
- doinitd "${T}/qemu-binfmt"
-
- # Install binfmt/qemu.conf.
- insinto "/usr/share/qemu/binfmt.d"
- doins "${T}/qemu.conf"
- fi
-
- if [[ -n ${softmmu_targets} ]]; then
- cd "${S}/softmmu-build"
- emake DESTDIR="${ED}" install
-
- # This might not exist if the test failed. #512010
- [[ -e check-report.html ]] && dodoc check-report.html
-
- if use kernel_linux; then
- udev_newrules "${FILESDIR}"/65-kvm.rules-r1 65-kvm.rules
- fi
-
- if use python; then
- python_foreach_impl qemu_python_install
- fi
- fi
-
- cd "${S}/tools-build"
- emake DESTDIR="${ED}" install
-
- # Disable mprotect on the qemu binaries as they use JITs to be fast #459348
- pushd "${ED}"/usr/bin >/dev/null
- pax-mark mr "${softmmu_bins[@]}" "${user_bins[@]}" # bug 575594
- popd >/dev/null
-
- # Install config file example for qemu-bridge-helper
- insinto "/etc/qemu"
- doins "${FILESDIR}/bridge.conf"
-
- cd "${S}"
- dodoc Changelog MAINTAINERS docs/specs/pci-ids.txt
- newdoc pc-bios/README README.pc-bios
-
- # Disallow stripping of prebuilt firmware files.
- dostrip -x ${QA_PREBUILT}
-
- if [[ -n ${softmmu_targets} ]]; then
- # Remove SeaBIOS since we're using the SeaBIOS packaged one
- rm "${ED}/usr/share/qemu/bios.bin"
- rm "${ED}/usr/share/qemu/bios-256k.bin"
- if use qemu_softmmu_targets_x86_64 || use qemu_softmmu_targets_i386; then
- dosym ../seabios/bios.bin /usr/share/qemu/bios.bin
- dosym ../seabios/bios-256k.bin /usr/share/qemu/bios-256k.bin
- fi
-
- # Remove vgabios since we're using the seavgabios packaged one
- rm "${ED}/usr/share/qemu/vgabios.bin"
- rm "${ED}/usr/share/qemu/vgabios-cirrus.bin"
- rm "${ED}/usr/share/qemu/vgabios-qxl.bin"
- rm "${ED}/usr/share/qemu/vgabios-stdvga.bin"
- rm "${ED}/usr/share/qemu/vgabios-virtio.bin"
- rm "${ED}/usr/share/qemu/vgabios-vmware.bin"
- # PPC64 loads vgabios-stdvga
- if use qemu_softmmu_targets_x86_64 || use qemu_softmmu_targets_i386 || use qemu_softmmu_targets_ppc64; then
- dosym ../seavgabios/vgabios-isavga.bin /usr/share/qemu/vgabios.bin
- dosym ../seavgabios/vgabios-cirrus.bin /usr/share/qemu/vgabios-cirrus.bin
- dosym ../seavgabios/vgabios-qxl.bin /usr/share/qemu/vgabios-qxl.bin
- dosym ../seavgabios/vgabios-stdvga.bin /usr/share/qemu/vgabios-stdvga.bin
- dosym ../seavgabios/vgabios-virtio.bin /usr/share/qemu/vgabios-virtio.bin
- dosym ../seavgabios/vgabios-vmware.bin /usr/share/qemu/vgabios-vmware.bin
- fi
-
- # Remove sgabios since we're using the sgabios packaged one
- rm "${ED}/usr/share/qemu/sgabios.bin"
- if use qemu_softmmu_targets_x86_64 || use qemu_softmmu_targets_i386; then
- dosym ../sgabios/sgabios.bin /usr/share/qemu/sgabios.bin
- fi
-
- # Remove iPXE since we're using the iPXE packaged one
- rm "${ED}"/usr/share/qemu/pxe-*.rom
- if use qemu_softmmu_targets_x86_64 || use qemu_softmmu_targets_i386; then
- dosym ../ipxe/8086100e.rom /usr/share/qemu/pxe-e1000.rom
- dosym ../ipxe/80861209.rom /usr/share/qemu/pxe-eepro100.rom
- dosym ../ipxe/10500940.rom /usr/share/qemu/pxe-ne2k_pci.rom
- dosym ../ipxe/10222000.rom /usr/share/qemu/pxe-pcnet.rom
- dosym ../ipxe/10ec8139.rom /usr/share/qemu/pxe-rtl8139.rom
- dosym ../ipxe/1af41000.rom /usr/share/qemu/pxe-virtio.rom
- fi
- fi
-
- DISABLE_AUTOFORMATTING=true
- readme.gentoo_create_doc
-}
-
-firmware_abi_change() {
- local pv
- for pv in ${REPLACING_VERSIONS}; do
- if ver_test $pv -lt ${FIRMWARE_ABI_VERSION}; then
- return 0
- fi
- done
- return 1
-}
-
-pkg_postinst() {
- if [[ -n ${softmmu_targets} ]] && use kernel_linux; then
- udev_reload
- fi
-
- xdg_icon_cache_update
-
- [[ -z ${EPREFIX} ]] && [[ -f ${EROOT}/usr/libexec/qemu-bridge-helper ]] && \
- fcaps cap_net_admin ${EROOT}/usr/libexec/qemu-bridge-helper
-
- DISABLE_AUTOFORMATTING=true
- readme.gentoo_print_elog
-
- if use pin-upstream-blobs && firmware_abi_change; then
- ewarn "This version of qemu pins new versions of firmware blobs:"
- ewarn " $(best_version sys-firmware/edk2-ovmf)"
- ewarn " $(best_version sys-firmware/ipxe)"
- ewarn " $(best_version sys-firmware/seabios)"
- ewarn " $(best_version sys-firmware/sgabios)"
- ewarn "This might break resume of hibernated guests (started with a different"
- ewarn "firmware version) and live migration to/from qemu versions with different"
- ewarn "firmware. Please (cold) restart all running guests. For functional"
- ewarn "guest migration ensure that all"
- ewarn "hosts run at least"
- ewarn " app-emulation/qemu-${FIRMWARE_ABI_VERSION}."
- fi
-}
-
-pkg_info() {
- echo "Using:"
- echo " $(best_version app-emulation/spice-protocol)"
- echo " $(best_version sys-firmware/edk2-ovmf)"
- if has_version 'sys-firmware/edk2-ovmf[binary]'; then
- echo " USE=binary"
- else
- echo " USE=''"
- fi
- echo " $(best_version sys-firmware/ipxe)"
- echo " $(best_version sys-firmware/seabios)"
- if has_version 'sys-firmware/seabios[binary]'; then
- echo " USE=binary"
- else
- echo " USE=''"
- fi
- echo " $(best_version sys-firmware/sgabios)"
-}
-
-pkg_postrm() {
- xdg_icon_cache_update
-}
projects / gentoo.git / commitdiff