+++ /dev/null
-DIST LPRng-3.8.35.tgz 12512453 BLAKE2B 82c23aa092ef5d9d946bc363c406aeaa9ef9cd566cb7ce353d0e7734ceab5fdd6129e6e1f9617d5e56481d93b3e30331a7dd128c5daff3e3609c67a022394d65 SHA512 ddebf23087b6c98c89369af26a2e46194c01243490ae47b025afde8ffcf0b1c05b9689702296c1a8aa38c2c38934df094d8cc7e922ab1ac27f51ce19f3676771
+++ /dev/null
---- LPRng-3.8.27/src/lprng_certs.orig 2004-12-20 00:29:21.000000000 +0100
-+++ LPRng-3.8.27/src/lprng_certs.sh 2004-12-20 00:33:49.000000000 +0100
-@@ -320,7 +320,9 @@
- # set default values
-
-
--CFG=/tmp/$$.sslcfg
-+TMPDIR=`mktemp -d -t lprng.XXXXXX` || { echo "$0: Cannot create temporary directory!" >&2 ; exit 1; }
-+trap "/bin/rm -rf ${TMPDIR}" 0 1 2 3 13 15
-+CFG=$TMPDIR/sslcfg
-
- OPENSSL=/usr/bin/openssl
- CA_KEY=//etc/lprng/ssl.ca/ca.key
-@@ -508,14 +510,14 @@
- shift
- if [ "$1" = "" ] ; then usage; fi;
- if [ ! -f "$1" ] ; then useage; fi;
-- sed -n -e '/BEGIN.*PRIVATE KEY/,/END.*PRIVATE KEY/p' $1 >/tmp/$$.key
-- sed -e '/BEGIN.*PRIVATE KEY/,/END.*PRIVATE KEY/d' $1 >/tmp/$$.crt
-- STEP="" encrypt /tmp/$$.key
-+ sed -n -e '/BEGIN.*PRIVATE KEY/,/END.*PRIVATE KEY/p' $1 >$TMPDIR/key
-+ sed -e '/BEGIN.*PRIVATE KEY/,/END.*PRIVATE KEY/d' $1 >$TMPDIR/crt
-+ STEP="" encrypt $TMPDIR/key
- status=$?
- echo STATUS $status
- if [ $status = 0 ] ; then
- mv $1 $1.orig
-- cat /tmp/$$.crt /tmp/$$.key >$1
-+ cat $TMPDIR/crt $TMPDIR/key >$1
- fi
- ;;
-
-@@ -845,5 +847,4 @@
- exit 1
- ;;
- esac
--rm -f ${CFG}
- exit $RET
+++ /dev/null
---- LPRng-3.8.28/src/common/krb5_auth.c.org 2004-09-24 22:19:57.000000000 +0200
-+++ LPRng-3.8.28/src/common/krb5_auth.c 2006-10-13 09:19:44.000000000 +0200
-@@ -922,7 +922,7 @@
- nstored = 0;
- }
-
-- if ((cc = Read_fd_len_timeout(transfer_timeout, fd, len_buf, 4)) != 4) {
-+ if ((cc = Read_fd_len_timeout(transfer_timeout, fd, (char*)len_buf, 4)) != 4) {
- /* XXX can't read enough, pipe must have closed */
- return(0);
- }
+++ /dev/null
---- LPRng-3.8.28/Makefile.in.orig 2004-09-24 22:19:52.000000000 +0200
-+++ LPRng-3.8.28/Makefile.in 2006-06-27 09:26:13.000000000 +0200
-@@ -42,7 +42,7 @@
- LPD_CONF_PATH=\"@LPD_CONF_PATH@\"
- PRINTCAP_PATH=\"@PRINTCAP_PATH@\"
- LPD_PATH=\"@LPD_DIR@/lpd\"
--SHELL="@SHELL@"
-+SHELL=@SHELL@
- LOCKFILE=\"@LOCKFILE@\"
- CONFIG_SUBDIR="@CONFIG_SUBDIR@"
- PSHOWALL="@PSHOWALL@"
+++ /dev/null
-#!/sbin/openrc-run
-# Copyright 1999-2012 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-depend() {
- need net
-}
-
-checkconfig() {
- if [ ! -e /etc/lprng/lpd.conf ] ; then
- eerror "You need an /etc/lprng/lpd.conf file first"
- eerror "There is a sample in /usr/share/doc/LPRng"
- return 1
- fi
- if [ ! -e /etc/lprng/printcap ] ; then
- eerror "You need an /etc/lprng/printcap file first"
- eerror "There is a sample in /usr/share/doc/LPRng"
- return 1
- fi
- if [ ! -e /etc/lprng/lpd.perms ] ; then
- eerror "You need an /etc/lprng/lpd.perms file first"
- eerror "There is a sample in /usr/share/doc/LPRng"
- return 1
- fi
-}
-
-start() {
- checkconfig || return 1
- ebegin "Starting lpd"
- start-stop-daemon --start --pidfile "/var/run/lpd.515" --quiet --exec /usr/sbin/lpd
- eend $?
-}
-
-stop() {
- ebegin "Stopping lpd"
- start-stop-daemon --stop --pidfile "/var/run/lpd.515" --quiet --exec /usr/sbin/lpd
- eend $?
-}
+++ /dev/null
-# /etc/printcap: printer capability database.
-#
-# You can use the filter entries df, tf, cf, gf etc. for your
-# own filters. See the printcap(5) manpage for more details.
-
-lp|Generic dot-matrix printer entry
- :lp=/dev/lp1
- :sd=/var/spool/lpd/lp
- :af=/var/log/lp-acct
- :lf=/var/log/lp-errs
- :pl#66
- :pw#80
- :pc#150
- :mx#0
- :sh
-
-# rlp|Remote printer entry
-# :lp=
-# :rm=remotehost
-# :rp=remoteprinter
-# :sd=/var/spool/lpd/remote
-# :mx#0
-# :sh
+++ /dev/null
-# Copyright 1999-2018 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=4
-
-inherit eutils flag-o-matic
-
-MY_PN=LPRng
-DESCRIPTION="Extended implementation of the Berkeley LPR print spooler"
-HOMEPAGE="http://www.lprng.com/"
-SRC_URI="ftp://ftp.lprng.com/pub/${MY_PN}/${MY_PN}/${MY_PN}-${PV}.tgz"
-
-LICENSE="|| ( GPL-2 Artistic )"
-SLOT="0"
-KEYWORDS="alpha amd64 arm hppa ia64 ~mips ppc ppc64 sh sparc x86"
-IUSE="foomaticdb kerberos nls ssl"
-
-RDEPEND="sys-process/procps
- ssl? ( dev-libs/openssl )
- foomaticdb? ( net-print/cups-filters[foomatic]
- net-print/foomatic-db )
- !>=net-print/cups-1.6.2-r4[-lprng-compat]
- !<net-print/cups-1.6.2-r4"
-DEPEND="${RDEPEND}
- nls? ( sys-devel/gettext )
- kerberos? ( app-crypt/mit-krb5 )"
-
-S=${WORKDIR}/${MY_PN}-${PV}
-
-src_prepare() {
- epatch "${FILESDIR}"/${PN}-3.8.27-certs.diff
- epatch "${FILESDIR}"/${PN}-3.8.28-make.diff
- epatch "${FILESDIR}"/${PN}-3.8.28-krb.diff
-}
-
-src_configure() {
- # wont compile with -O3, needs -O2
- replace-flags -O[3-9] -O2
-
- econf \
- $(use_enable nls) \
- $(use_enable kerberos) \
- $(use_enable ssl) \
- --disable-setuid \
- --disable-werror \
- --with-userid=lp \
- --with-groupid=lp \
- --with-lpd_conf_path=/etc/lprng/lpd.conf \
- --with-lpd_perms_path=/etc/lprng/lpd.perms \
- --libexecdir=/usr/libexec/lprng \
- --sysconfdir=/etc/lprng \
- --disable-strip
-}
-
-src_compile() {
- # bash is necessary due to bashisms in libtool
- emake -j1 SHELL=/bin/bash
-}
-
-src_install() {
- dodir /var/spool/lpd
- diropts -m 700 -o lp -g lp
- dodir /var/spool/lpd/lp
-
- emake install \
- DESTDIR="${D}" \
- POSTINSTALL="NO" \
- gnulocaledir="${D}"/usr/share/locale
-
- dodoc CHANGES README VERSION "${FILESDIR}"/printcap lpd.conf lpd.perms
-
- insinto /etc/lprng
- doins "${FILESDIR}"/printcap lpd.conf lpd.perms
- dosym /etc/lprng/printcap /etc/printcap
- newinitd "${FILESDIR}"/lprng-init lprng
-}
-
-pkg_postinst() {
- einfo "If printing does not work, try 'checkpc'/'checkpc -f'"
-}
+++ /dev/null
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE pkgmetadata SYSTEM "http://www.gentoo.org/dtd/metadata.dtd">
-<pkgmetadata>
- <maintainer type="person">
- <email>mgorny@gentoo.org</email>
- <name>Michał Górny</name>
- </maintainer>
-<maintainer type="project">
- <email>printing@gentoo.org</email>
- <name>Gentoo Printing Project</name>
- </maintainer>
- <use>
- <flag name='foomaticdb'>Add support for the foomatic printing
- driver database</flag>
- </use>
-</pkgmetadata>
# -dropbox, -git, -mercurial, -subversion. Masked for removal in 30 days.
kde-apps/dolphin-plugins
-# Michał Górny <mgorny@gentoo.org> (21 Mar 2019)
-# Not really maintained anymore. Last upstream release is from 2015.
-# Fails to build against modern versions of app-crypt/mit-krb5, may have
-# more hidden issues. It is probably time to move to net-print/cups.
-# net-print/magicfilter is the only reverse dependency (from 2011).
-# Removal in 30 days. Bug #496922.
-net-print/lprng
-
# Miroslav Šulc <fordfrog@gentoo.org> (19 Mar 2019)
# Depends on >=virtual/{jdk,jre}-11 which is masked
=www-servers/tomcat-9.0.17
projects / gentoo.git / commitdiff