initial import

Package-Manager: portage-2.0.53_rc7

diff --git a/net-firewall/shapecfg/ChangeLog b/net-firewall/shapecfg/ChangeLog
new file mode 100644 (file)
index 0000000..c62714a
--- /dev/null
+++ b/net-firewall/shapecfg/ChangeLog
@@ -0,0 +1,8 @@
+# ChangeLog for net-firewall/shapecfg
+# Copyright 1999-2005 Gentoo Foundation; Distributed under the GPL v2
+# $Header: /var/cvsroot/gentoo-x86/net-firewall/shapecfg/ChangeLog,v 1.1 2005/11/15 00:48:55 vapier Exp $
+
+*shapecfg-36 (14 Nov 2005)
+
+  14 Nov 2005; Mike Frysinger <vapier@gentoo.org> :
+  Initial import.  Ebuild submitted by me.

diff --git a/net-firewall/shapecfg/Manifest b/net-firewall/shapecfg/Manifest
new file mode 100644 (file)
index 0000000..7d16b8a
--- /dev/null
+++ b/net-firewall/shapecfg/Manifest
@@ -0,0 +1,15 @@
+-----BEGIN PGP SIGNED MESSAGE-----
+Hash: SHA1
+
+MD5 9380c343275d66f55bc0626f896a0798 ChangeLog 338
+MD5 67ba4a8b44f135c870db3e0254972d7e files/README.shaper 1698
+MD5 8736c01b98e3b29cc1c7c8dc4f4a5ad4 files/digest-shapecfg-36 58
+MD5 d663363debcea6f0db4842a8e3c50b17 files/shapercfg-2.0.36-glibc.patch 372
+MD5 193298cc47dd9b1e1c1a3207a3de07f4 shapecfg-36.ebuild 726
+-----BEGIN PGP SIGNATURE-----
+Version: GnuPG v1.4.2 (GNU/Linux)
+
+iD8DBQFDeTC/gIKl8Uu19MoRAn0RAJwL2d6IAkLiRZZAJS7QLasr0F5xuQCeI+2l
+i1+3NMiizJ3rF0T9LvAQwkU=
+=fd+i
+-----END PGP SIGNATURE-----

diff --git a/net-firewall/shapecfg/files/README.shaper b/net-firewall/shapecfg/files/README.shaper
new file mode 100644 (file)
index 0000000..60c2b4d
--- /dev/null
+++ b/net-firewall/shapecfg/files/README.shaper
@@ -0,0 +1,50 @@
+
+Traffic Shaper For Linux
+
+This is the current ALPHA release of the traffic shaper for Linux. It works
+within the following limits:
+
+o       Minimum shaping speed is currently about 9600 baud (it can only
+       shape down to 1 byte per clock tick)
+
+o       Maximum is about 256K, it will go above this but get a bit blocky.
+
+o       If you ifconfig the master device that a shaper is attached to down
+       then your machine will follow.
+
+o       The shaper must be a module.
+
+
+Setup:
+
+A shaper device is configured using the shapeconfig program.
+Typically you will do something like this
+
+shapecfg attach shaper0 eth1
+shapecfg speed shaper0 64000
+ifconfig shaper0 myhost netmask 255.255.255.240 broadcast 1.2.3.4.255 up
+route add -net some.network netmask a.b.c.d dev shaper0
+
+The shaper should have the same IP address as the device it is attached to
+for normal use.
+
+Gotchas:
+
+        The shaper shapes transmitted traffic. It's rather impossible to
+shape received traffic except at the end (or a router) transmitting it.
+
+        Gated/routed/rwhod/mrouted all see the shaper as an additional device
+and will treat it as such unless patched. Note that for mrouted you can run
+mrouted tunnels via a traffic shaper to control bandwidth usage.
+
+        The shaper is device/route based. This makes it very easy to use
+with any setup BUT less flexible. You may well want to combine this patch
+with Mike McLagan 's patch to allow routes to be
+specified by source/destination pairs.
+
+        There is no "borrowing" or "sharing" scheme. This is a simple
+traffic limiter. I'd like to implement Van Jacobson and Sally Floyd's CBQ
+architecture into Linux one day (maybe in 2.1 sometime) and do this with
+style.
+
+

diff --git a/net-firewall/shapecfg/files/digest-shapecfg-36 b/net-firewall/shapecfg/files/digest-shapecfg-36
new file mode 100644 (file)
index 0000000..9f114c3
--- /dev/null
+++ b/net-firewall/shapecfg/files/digest-shapecfg-36
@@ -0,0 +1 @@
+MD5 fc009b9dfc7b85722c73636c99be9a6b shaper.36.tar.gz 671

diff --git a/net-firewall/shapecfg/files/shapercfg-2.0.36-glibc.patch b/net-firewall/shapecfg/files/shapercfg-2.0.36-glibc.patch
new file mode 100644 (file)
index 0000000..3fb6a36
--- /dev/null
+++ b/net-firewall/shapecfg/files/shapercfg-2.0.36-glibc.patch
@@ -0,0 +1,15 @@
+--- shaper/shapecfg.c.glibc    Tue Sep 29 20:24:02 1998
++++ shaper/shapecfg.c  Tue Sep 29 20:29:27 1998
+@@ -3,9 +3,9 @@
+ #include <stdlib.h>
+ #include <linux/types.h>
+ #include <netinet/in.h>
+-#include <linux/if.h>
+-#include <linux/if_shaper.h>
+-#include <linux/sockios.h>
++#include <net/if.h>
++#include <net/if_shaper.h>
++#include <sys/ioctl.h>
+ 
+ void usage(char *name)
+ {     

diff --git a/net-firewall/shapecfg/shapecfg-36.ebuild b/net-firewall/shapecfg/shapecfg-36.ebuild
new file mode 100644 (file)
index 0000000..77769d7
--- /dev/null
+++ b/net-firewall/shapecfg/shapecfg-36.ebuild
@@ -0,0 +1,35 @@
+# Copyright 1999-2005 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-firewall/shapecfg/shapecfg-36.ebuild,v 1.1 2005/11/15 00:48:55 vapier Exp $
+
+inherit eutils flag-o-matic
+
+DESCRIPTION="configuration tool for setting traffic bandwidth parameters"
+HOMEPAGE=""
+SRC_URI="mirror://gentoo/shaper.${PV}.tar.gz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~arm ~x86"
+IUSE=""
+
+DEPEND=""
+
+S=${WORKDIR}/shaper
+
+src_unpack() {
+       unpack ${A}
+       cd "${S}"
+       epatch "${FILESDIR}"/shapercfg-2.0.36-glibc.patch
+       rm -f Makefile
+}
+
+src_compile() {
+       append-flags -Wall
+       emake shapecfg || die
+}
+
+src_install() {
+       dobin shapecfg || die
+       dodoc "${FILESDIR}"/README.shaper
+}